ALWAYS_EXCEPT=" 42a 42b 42c 45 68b $SANITY_EXCEPT"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
-# bug number for skipped tests: LU-2036 LU-8411 LU-9096
-ALWAYS_EXCEPT=" 76 407 253 $ALWAYS_EXCEPT"
+# skipped tests: LU-2036 LU-8411 LU-9096 LU-9054
+ALWAYS_EXCEPT=" 76 407 253 312 $ALWAYS_EXCEPT"
# Check Grants after these tests
GRANT_CHECK_LIST="$GRANT_CHECK_LIST 42a 42b 42c 42d 42e 63a 63b 64a 64b 64c"
[ "$SLOW" = "no" ] && EXCEPT_SLOW="27m 64b 68 71 115 300o"
if [ $(facet_fstype $SINGLEMDS) = "zfs" ]; then
- # bug number for skipped test: LU-4536 LU-1957
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 65ic 180"
+ # bug number for skipped test: LU-1957
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 180"
# 13 (min)"
[ "$SLOW" = "no" ] && EXCEPT_SLOW="$EXCEPT_SLOW 51b"
fi
$LCTL get_param mdc.*.import | grep "target: $FSNAME-MDT" ||
error "bad target"
}
-run_test 0c "check import proc ============================="
+run_test 0c "check import proc"
test_1() {
- test_mkdir -p $DIR/$tdir || error "mkdir $tdir failed"
- test_mkdir -p $DIR/$tdir/d2 || error "mkdir $tdir/d2 failed"
- test_mkdir $DIR/$tdir/d2 && error "we expect EEXIST, but not returned"
+ test_mkdir $DIR/$tdir
+ test_mkdir $DIR/$tdir/d2
+ mkdir $DIR/$tdir/d2 && error "we expect EEXIST, but not returned"
$CHECKSTAT -t dir $DIR/$tdir/d2 || error "$tdir/d2 is not a dir"
rmdir $DIR/$tdir/d2
rmdir $DIR/$tdir
$CHECKSTAT -a $DIR/$tdir || error "$tdir was not removed"
}
-run_test 1 "mkdir; remkdir; rmdir =============================="
+run_test 1 "mkdir; remkdir; rmdir"
test_2() {
- test_mkdir -p $DIR/$tdir || error "mkdir $tdir failed"
+ test_mkdir $DIR/$tdir
touch $DIR/$tdir/$tfile || error "touch $tdir/$tfile failed"
$CHECKSTAT -t file $DIR/$tdir/$tfile || error "$tdir/$tfile not a file"
rm -r $DIR/$tdir
$CHECKSTAT -a $DIR/$tdir/$tfile || error "$tdir/$file is not removed"
}
-run_test 2 "mkdir; touch; rmdir; check file ===================="
+run_test 2 "mkdir; touch; rmdir; check file"
test_3() {
- test_mkdir -p $DIR/$tdir || error "mkdir $tdir failed"
+ test_mkdir $DIR/$tdir
$CHECKSTAT -t dir $DIR/$tdir || error "$tdir is not a directory"
touch $DIR/$tdir/$tfile
$CHECKSTAT -t file $DIR/$tdir/$tfile || error "$tdir/$tfile not a file"
rm -r $DIR/$tdir
$CHECKSTAT -a $DIR/$tdir || error "$tdir is not removed"
}
-run_test 3 "mkdir; touch; rmdir; check dir ====================="
+run_test 3 "mkdir; touch; rmdir; check dir"
# LU-4471 - failed rmdir on remote directories still removes directory on MDT0
test_4() {
- local MDTIDX=1
-
- test_mkdir $DIR/$tdir ||
- error "Create remote directory failed"
+ test_mkdir -i 1 $DIR/$tdir
touch $DIR/$tdir/$tfile ||
error "Create file under remote directory failed"
run_test 4 "mkdir; touch dir/file; rmdir; checkdir (expect error)"
test_5() {
- test_mkdir -p $DIR/$tdir || error "mkdir $tdir failed"
- test_mkdir $DIR/$tdir/d2 || error "mkdir $tdir/d2 failed"
+ test_mkdir $DIR/$tdir
+ test_mkdir $DIR/$tdir/d2
chmod 0707 $DIR/$tdir/d2 || error "chmod 0707 $tdir/d2 failed"
$CHECKSTAT -t dir -p 0707 $DIR/$tdir/d2 || error "$tdir/d2 not mode 707"
$CHECKSTAT -t dir $DIR/$tdir/d2 || error "$tdir/d2 is not a directory"
}
-run_test 5 "mkdir .../d5 .../d5/d2; chmod .../d5/d2 ============"
+run_test 5 "mkdir .../d5 .../d5/d2; chmod .../d5/d2"
test_6a() {
touch $DIR/$tfile || error "touch $DIR/$tfile failed"
$CHECKSTAT -t file -u \#$UID -g \#$RUNAS_ID $DIR/$tfile ||
error "$tfile should be owned by UID $UID and GID $RUNAS_ID"
}
-run_test 6e "touch f6e; chgrp f6e; $RUNAS chgrp f6e (should return error) =="
+run_test 6e "touch+chgrp $tfile; $RUNAS chgrp $tfile (should return error)"
test_6g() {
[ $RUNAS_ID -eq $UID ] && skip_env "RUNAS_ID = UID = $UID" && return
- test_mkdir $DIR/$tdir || error "mkdir $tfile failed"
+ test_mkdir $DIR/$tdir
chmod 777 $DIR/$tdir || error "chmod 0777 $tdir failed"
$RUNAS mkdir $DIR/$tdir/d || error "mkdir $tdir/d failed"
chmod g+s $DIR/$tdir/d || error "chmod g+s $tdir/d failed"
- test_mkdir $DIR/$tdir/d/subdir || error "mkdir $tdir/d/subdir failed"
+ test_mkdir $DIR/$tdir/d/subdir
$CHECKSTAT -g \#$RUNAS_GID $DIR/$tdir/d/subdir ||
error "$tdir/d/subdir should be GID $RUNAS_GID"
if [[ $MDSCOUNT -gt 1 ]]; then
error "$tdir.remote should be mode 02755"
fi
}
-run_test 6g "Is new dir in sgid dir inheriting group?"
+run_test 6g "verify new dir in sgid dir inherits group"
test_6h() { # bug 7331
[ $RUNAS_ID -eq $UID ] && skip_env "RUNAS_ID = UID = $UID" && return
$CHECKSTAT -t file -u \#$RUNAS_ID -g \#$RUNAS_GID $DIR/$tfile ||
error "$tdir/$tfile should be UID $RUNAS_UID GID $RUNAS_GID"
}
-run_test 6h "$RUNAS chown RUNAS_ID.0 .../f6h (should return error)"
+run_test 6h "$RUNAS chown RUNAS_ID.0 .../$tfile (should return error)"
test_7a() {
test_mkdir $DIR/$tdir
rm -rf $DIR/$tdir/$tfile
$CHECKSTAT -a $DIR/$tdir/$tfile || error "$tdir/$tfile not removed"
}
-run_test 16 "touch .../d16/f; rm -rf .../d16/f ================="
+run_test 16 "touch .../d16/f; rm -rf .../d16/f"
test_17a() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
touch $DIR/$tdir/$tfile
ln -s $DIR/$tdir/$tfile $DIR/$tdir/l-exist
ls -l $DIR/$tdir
rm -f $DIR/$tdir/l-exist
$CHECKSTAT -a $DIR/$tdir/l-exist || error "$tdir/l-exist not removed"
}
-run_test 17a "symlinks: create, remove (real) =================="
+run_test 17a "symlinks: create, remove (real)"
test_17b() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
ln -s no-such-file $DIR/$tdir/l-dangle
ls -l $DIR/$tdir
$CHECKSTAT -l no-such-file $DIR/$tdir/l-dangle ||
rm -f $DIR/$tdir/l-dangle
$CHECKSTAT -a $DIR/$tdir/l-dangle || error "$tdir/l-dangle not removed"
}
-run_test 17b "symlinks: create, remove (dangling) =============="
+run_test 17b "symlinks: create, remove (dangling)"
test_17c() { # bug 3440 - don't save failed open RPC for replay
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
ln -s foo $DIR/$tdir/$tfile
cat $DIR/$tdir/$tfile && error "opened non-existent symlink" || true
}
-run_test 17c "symlinks: open dangling (should return error) ===="
+run_test 17c "symlinks: open dangling (should return error)"
test_17d() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
ln -s foo $DIR/$tdir/$tfile
touch $DIR/$tdir/$tfile || error "creating to new symlink"
}
-run_test 17d "symlinks: create dangling ========================"
+run_test 17d "symlinks: create dangling"
test_17e() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
local foo=$DIR/$tdir/$tfile
ln -s $foo $foo || error "create symlink failed"
ls -l $foo || error "ls -l failed"
ls $foo && error "ls not failed" || true
}
-run_test 17e "symlinks: create recursive symlink (should return error) ===="
+run_test 17e "symlinks: create recursive symlink (should return error)"
test_17f() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
ln -s 1234567890/2234567890/3234567890/4234567890 $DIR/$tdir/111
ln -s 1234567890/2234567890/3234567890/4234567890/5234567890/6234567890 $DIR/$tdir/222
ln -s 1234567890/2234567890/3234567890/4234567890/5234567890/6234567890/7234567890/8234567890 $DIR/$tdir/333
ln -s 1234567890/2234567890/3234567890/4234567890/5234567890/6234567890/7234567890/8234567890/9234567890/a234567890/b234567890/c234567890/d234567890/f234567890/aaaaaaaaaa/bbbbbbbbbb/cccccccccc/dddddddddd/eeeeeeeeee/ffffffffff/ $DIR/$tdir/666
ls -l $DIR/$tdir
}
-run_test 17f "symlinks: long and very long symlink name ========================"
+run_test 17f "symlinks: long and very long symlink name"
# str_repeat(S, N) generate a string that is string S repeated N times
str_repeat() {
# Long symlinks and LU-2241
test_17g() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
local TESTS="59 60 61 4094 4095"
# Fix for inode size boundary in 2.1.4
remote_mds_nodsh && skip "remote MDS with nodsh" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local mdt_idx
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
if [[ $MDSCOUNT -gt 1 ]]; then
mdt_idx=$($LFS getdirstripe -i $DIR/$tdir)
else
mdt_idx=0
fi
- $SETSTRIPE -c -1 $DIR/$tdir
-#define OBD_FAIL_MDS_LOV_PREP_CREATE 0x141
- do_facet mds$((mdt_idx + 1)) lctl set_param fail_loc=0x80000141
- touch $DIR/$tdir/$tfile || true
+ $LFS setstripe -c -1 $DIR/$tdir
+ #define OBD_FAIL_MDS_LOV_PREP_CREATE 0x141
+ do_facet mds$((mdt_idx + 1)) lctl set_param fail_loc=0x80000141
+ touch $DIR/$tdir/$tfile || true
}
run_test 17h "create objects: lov_free_memmd() doesn't lbug"
rsync --help | grep -q xattr ||
skip_env "$(rsync --version | head -n1) does not support xattrs"
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return 0
- test_mkdir -p $DIR/$tdir
- test_mkdir -p $DIR/$tdir.new
+ test_mkdir $DIR/$tdir
+ test_mkdir $DIR/$tdir.new
touch $DIR/$tdir/$tfile
ln -s $DIR/$tdir/$tfile $DIR/$tdir/$tfile.lnk
rsync -av -X $DIR/$tdir/ $DIR/$tdir.new ||
error "rsync failed with xattrs enabled"
}
-run_test 17k "symlinks: rsync with xattrs enabled ========================="
+run_test 17k "symlinks: rsync with xattrs enabled"
test_17l() { # LU-279
[[ -z "$(which getfattr 2>/dev/null)" ]] &&
skip "no getfattr command" && return 0
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
touch $DIR/$tdir/$tfile
ln -s $DIR/$tdir/$tfile $DIR/$tdir/$tfile.lnk
for path in "$DIR/$tdir" "$DIR/$tdir/$tfile" "$DIR/$tdir/$tfile.lnk"; do
done
done
}
-run_test 17l "Ensure lgetxattr's returned xattr size is consistent ========"
+run_test 17l "Ensure lgetxattr's returned xattr size is consistent"
# LU-1540
test_17m() {
local short_sym="0123456789"
- local WDIR=$DIR/${tdir}m
+ local wdir=$DIR/$tdir
local i
remote_mds_nodsh && skip "remote MDS with nodsh" && return
skip "MDS 2.2.0-2.2.93 do not NUL-terminate symlinks" && return
[ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
- skip "only for ldiskfs MDT" && return 0
+ skip "ldiskfs only test" && return 0
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- test_mkdir -p $WDIR
+ test_mkdir $wdir
long_sym=$short_sym
# create a long symlink file
for ((i = 0; i < 4; ++i)); do
long_sym=${long_sym}${long_sym}
done
- echo "create 512 short and long symlink files under $WDIR"
+ echo "create 512 short and long symlink files under $wdir"
for ((i = 0; i < 256; ++i)); do
- ln -sf ${long_sym}"a5a5" $WDIR/long-$i
- ln -sf ${short_sym}"a5a5" $WDIR/short-$i
+ ln -sf ${long_sym}"a5a5" $wdir/long-$i
+ ln -sf ${short_sym}"a5a5" $wdir/short-$i
done
echo "erase them"
- rm -f $WDIR/*
+ rm -f $wdir/*
sync
wait_delete_completed
echo "recreate the 512 symlink files with a shorter string"
for ((i = 0; i < 512; ++i)); do
# rewrite the symlink file with a shorter string
- ln -sf ${long_sym} $WDIR/long-$i || error "long_sym failed"
- ln -sf ${short_sym} $WDIR/short-$i || error "short_sym failed"
+ ln -sf ${long_sym} $wdir/long-$i || error "long_sym failed"
+ ln -sf ${short_sym} $wdir/short-$i || error "short_sym failed"
done
- local mds_index=$(($($LFS getstripe -M $WDIR) + 1))
+ local mds_index=$(($($LFS getstripe -M $wdir) + 1))
local devname=$(mdsdevname $mds_index)
echo "stop and checking mds${mds_index}:"
run_e2fsck $(facet_active_host mds${mds_index}) $devname -n
rc=$?
- start mds${mds_index} $devname $MDS_MOUNT_OPTS || error "start failed"
+ start mds${mds_index} $devname $MDS_MOUNT_OPTS ||
+ error "start mds${mds_index} failed"
df $MOUNT > /dev/null 2>&1
[ $rc -eq 0 ] ||
error "e2fsck detected error for short/long symlink: rc=$rc"
skip "MDS 2.2.0-2.2.93 do not NUL-terminate symlinks" && return
[ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
- skip "only for ldiskfs MDT" && return 0
+ skip "ldiskfs only test" && return 0
[[ $MDSCOUNT -lt 2 ]] && skip "needs >= 2 MDTs" && return
[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.64) ] &&
skip "Need MDS version at least 2.3.64" && return
- local WDIR=$DIR/${tdir}o
+ local wdir=$DIR/${tdir}o
local mdt_index
local rc=0
- test_mkdir -p $WDIR
- touch $WDIR/$tfile
- mdt_index=$($LFS getstripe -M $WDIR/$tfile)
- mdt_index=$((mdt_index+1))
+ test_mkdir $wdir
+ touch $wdir/$tfile
+ mdt_index=$($LFS getstripe -M $wdir/$tfile)
+ mdt_index=$((mdt_index + 1))
cancel_lru_locks mdc
#fail mds will wait the failover finish then set
#define OBD_FAIL_OSD_LMA_INCOMPAT 0x194
do_facet mds${mdt_index} lctl set_param fail_loc=0x194
- ls -l $WDIR/$tfile && rc=1
+ ls -l $wdir/$tfile && rc=1
do_facet mds${mdt_index} lctl set_param fail_loc=0
- [[ $rc -ne 0 ]] && error "stat file should fail"
- true
+ [[ $rc -eq 0 ]] || error "stat file should fail"
}
run_test 17o "stat file with incompat LMA feature"
test_20() {
touch $DIR/$tfile
rm $DIR/$tfile
- log "1 done"
touch $DIR/$tfile
rm $DIR/$tfile
- log "2 done"
touch $DIR/$tfile
rm $DIR/$tfile
- log "3 done"
$CHECKSTAT -a $DIR/$tfile || error "$tfile was not removed"
}
-run_test 20 "touch .../f ; ls -l ... ==========================="
+run_test 20 "touch .../f ; ls -l ..."
test_21() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
[ -f $DIR/$tdir/dangle ] && rm -f $DIR/$tdir/dangle
ln -s dangle $DIR/$tdir/link
echo foo >> $DIR/$tdir/link
$CHECKSTAT -f -t file $DIR/$tdir/link ||
error "$tdir/link not linked to a file"
}
-run_test 21 "write to dangling link ============================"
+run_test 21 "write to dangling link"
test_22() {
- WDIR=$DIR/$tdir
- test_mkdir -p $DIR/$tdir
- chown $RUNAS_ID:$RUNAS_GID $WDIR
- (cd $WDIR || error "cd $WDIR failed";
- $RUNAS tar cf - /etc/hosts /etc/sysconfig/network | \
- $RUNAS tar xf -)
- ls -lR $WDIR/etc || error "ls -lR $WDIR/etc failed"
- $CHECKSTAT -t dir $WDIR/etc || error "checkstat -t dir failed"
- $CHECKSTAT -u \#$RUNAS_ID -g \#$RUNAS_GID $WDIR/etc || error "checkstat -u failed"
-}
-run_test 22 "unpack tar archive as non-root user ==============="
+ local wdir=$DIR/$tdir
+ test_mkdir $wdir
+ chown $RUNAS_ID:$RUNAS_GID $wdir
+ (cd $wdir || error "cd $wdir failed";
+ $RUNAS tar cf - /etc/hosts /etc/sysconfig/network |
+ $RUNAS tar xf -)
+ ls -lR $wdir/etc || error "ls -lR $wdir/etc failed"
+ $CHECKSTAT -t dir $wdir/etc || error "checkstat -t dir failed"
+ $CHECKSTAT -u \#$RUNAS_ID -g \#$RUNAS_GID $wdir/etc ||
+ error "checkstat -u failed"
+}
+run_test 22 "unpack tar archive as non-root user"
# was test_23
test_23a() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
local file=$DIR/$tdir/$tfile
openfile -f O_CREAT:O_EXCL $file || error "$file create failed"
openfile -f O_CREAT:O_EXCL $file &&
error "$file recreate succeeded" || true
}
-run_test 23a "O_CREAT|O_EXCL in subdir =========================="
+run_test 23a "O_CREAT|O_EXCL in subdir"
test_23b() { # bug 18988
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
local file=$DIR/$tdir/$tfile
- rm -f $file
- echo foo > $file || error "write filed"
- echo bar >> $file || error "append filed"
- $CHECKSTAT -s 8 $file || error "wrong size"
- rm $file
+ rm -f $file
+ echo foo > $file || error "write filed"
+ echo bar >> $file || error "append filed"
+ $CHECKSTAT -s 8 $file || error "wrong size"
+ rm $file
}
-run_test 23b "O_APPEND check =========================="
+run_test 23b "O_APPEND check"
# rename sanity
test_24a() {
run_test 24n "Statting the old file after renaming (Posix rename 2)"
test_24o() {
- test_mkdir -p $DIR/d24o
- rename_many -s random -v -n 10 $DIR/d24o
+ test_mkdir $DIR/$tdir
+ rename_many -s random -v -n 10 $DIR/$tdir
}
-run_test 24o "rename of files during htree split ==============="
+run_test 24o "rename of files during htree split"
test_24p() {
test_mkdir $DIR/R12a
local MDTIDX=1
local remote_dir=$DIR/$tdir/remote_dir
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
$LFS mkdir -i $MDTIDX $remote_dir ||
error "create remote directory failed"
- test_mkdir -p $DIR/$tdir/src_dir
+ test_mkdir $DIR/$tdir/src_dir
touch $DIR/$tdir/src_file
- test_mkdir -p $remote_dir/tgt_dir
+ test_mkdir $remote_dir/tgt_dir
touch $remote_dir/tgt_file
mrename $DIR/$tdir/src_dir $remote_dir/tgt_dir ||
test_24y() {
[[ $MDSCOUNT -lt 2 ]] && skip "needs >= 2 MDTs" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- local MDTIDX=1
local remote_dir=$DIR/$tdir/remote_dir
+ local mdtidx=1
- test_mkdir -p $DIR/$tdir
- $LFS mkdir -i $MDTIDX $remote_dir ||
+ test_mkdir $DIR/$tdir
+ $LFS mkdir -i $mdtidx $remote_dir ||
error "create remote directory failed"
- test_mkdir -p $remote_dir/src_dir
+ test_mkdir $remote_dir/src_dir
touch $remote_dir/src_file
- test_mkdir -p $remote_dir/tgt_dir
+ test_mkdir $remote_dir/tgt_dir
touch $remote_dir/tgt_file
mrename $remote_dir/src_dir $remote_dir/tgt_dir ||
local NFILES=5000
rm -rf $DIR/$tdir
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
trap simple_cleanup_common EXIT
createmany -m $DIR/$tdir/$tfile $NFILES
local t=$(ls $DIR/$tdir | wc -l)
run_test 26a "multiple component symlink ======================="
test_26b() {
- test_mkdir -p $DIR/d26b/d26-2
- ln -s d26b/d26-2/foo $DIR/s26-2
+ test_mkdir -p $DIR/$tdir/d26-2
+ ln -s $tdir/d26-2/foo $DIR/s26-2
touch $DIR/s26-2 || error
}
run_test 26b "multiple component symlink at end of lookup ======"
ln -s s26.2-2 $DIR/s26.2-3
chmod 0666 $DIR/s26.2-3/foo
}
-run_test 26c "chain of symlinks ================================"
+run_test 26c "chain of symlinks"
# recursive symlinks (bug 439)
test_26d() {
ln -s d26-3/foo $DIR/d26-3
}
-run_test 26d "create multiple component recursive symlink ======"
+run_test 26d "create multiple component recursive symlink"
test_26e() {
[ ! -h $DIR/d26-3 ] && test_26d
rm $DIR/d26-3
}
-run_test 26e "unlink multiple component recursive symlink ======"
+run_test 26e "unlink multiple component recursive symlink"
# recursive symlinks (bug 7022)
test_26f() {
- test_mkdir -p $DIR/$tdir
- test_mkdir $DIR/$tdir/$tfile || error "mkdir $DIR/$tdir/$tfile failed"
+ test_mkdir $DIR/$tdir
+ test_mkdir $DIR/$tdir/$tfile
cd $DIR/$tdir/$tfile || error "cd $DIR/$tdir/$tfile failed"
- test_mkdir -p lndir/bar1 || error "mkdir lndir/bar1 failed"
- test_mkdir $DIR/$tdir/$tfile/$tfile || error "mkdir $tfile failed"
+ test_mkdir -p lndir/bar1
+ test_mkdir $DIR/$tdir/$tfile/$tfile
cd $tfile || error "cd $tfile failed"
ln -s .. dotdot || error "ln dotdot failed"
ln -s dotdot/lndir lndir || error "ln lndir failed"
rm -r $tfile || error "rm $tfile failed"
$CHECKSTAT -a $DIR/$tfile || error "$tfile not gone"
}
-run_test 26f "rm -r of a directory which has recursive symlink ="
+run_test 26f "rm -r of a directory which has recursive symlink"
test_27a() {
- echo '== stripe sanity =============================================='
- test_mkdir -p $DIR/d27 || error "mkdir failed"
- $GETSTRIPE $DIR/d27
- $SETSTRIPE -c 1 $DIR/d27/f0 || error "setstripe failed"
- $CHECKSTAT -t file $DIR/d27/f0 || error "checkstat failed"
- log "== test_27a: write to one stripe file ========================="
- cp /etc/hosts $DIR/d27/f0 || error
+ test_mkdir $DIR/$tdir
+ $LFS getstripe $DIR/$tdir
+ $LFS setstripe -c 1 $DIR/$tdir/$tfile || error "setstripe failed"
+ $CHECKSTAT -t file $DIR/$tdir/$tfile || error "checkstat failed"
+ cp /etc/hosts $DIR/$tdir/$tfile || error
}
-run_test 27a "one stripe file =================================="
+run_test 27a "one stripe file"
test_27b() {
- [[ $OSTCOUNT -lt 2 ]] && skip_env "skipping 2-stripe test" && return
- test_mkdir -p $DIR/d27
- $SETSTRIPE -c 2 $DIR/d27/f01 || error "setstripe failed"
- $GETSTRIPE -c $DIR/d27/f01
- [ $($GETSTRIPE -c $DIR/d27/f01) -eq 2 ] ||
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
+ test_mkdir $DIR/$tdir
+ $LFS setstripe -c 2 $DIR/$tdir/$tfile || error "setstripe failed"
+ $LFS getstripe -c $DIR/$tdir/$tfile
+ [ $($LFS getstripe -c $DIR/$tdir/$tfile) -eq 2 ] ||
error "two-stripe file doesn't have two stripes"
- dd if=/dev/zero of=$DIR/d27/f01 bs=4k count=4 || error "dd failed"
+ dd if=/dev/zero of=$DIR/$tdir/$tfile bs=4k count=4 || error "dd failed"
}
run_test 27b "create and write to two stripe file"
test_27d() {
- test_mkdir -p $DIR/d27
- $SETSTRIPE -c 0 -i -1 -S 0 $DIR/d27/fdef || error "setstripe failed"
- $CHECKSTAT -t file $DIR/d27/fdef || error "checkstat failed"
- dd if=/dev/zero of=$DIR/d27/fdef bs=4k count=4 || error
+ test_mkdir $DIR/$tdir
+ $LFS setstripe -c 0 -i -1 -S 0 $DIR/$tdir/$tfile ||
+ error "setstripe failed"
+ $CHECKSTAT -t file $DIR/$tdir/$tfile || error "checkstat failed"
+ dd if=/dev/zero of=$DIR/$tdir/$tfile bs=4k count=4 || error "dd failed"
}
-run_test 27d "create file with default settings ================"
+run_test 27d "create file with default settings"
test_27e() {
# LU-5839 adds check for existed layout before setting it
[[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.56) ]] &&
skip "Need MDS version at least 2.7.56" && return
- test_mkdir -p $DIR/d27
- $SETSTRIPE -c 2 $DIR/d27/f12 || error "setstripe failed"
- $SETSTRIPE -c 2 $DIR/d27/f12 && error "setstripe succeeded twice"
- $CHECKSTAT -t file $DIR/d27/f12 || error "checkstat failed"
+ test_mkdir $DIR/$tdir
+ $LFS setstripe -c 2 $DIR/$tdir/$tfile || error "setstripe failed"
+ $LFS setstripe -c 2 $DIR/$tdir/$tfile && error "setstripe worked twice"
+ $CHECKSTAT -t file $DIR/$tdir/$tfile || error "checkstat failed"
}
-run_test 27e "setstripe existing file (should return error) ======"
+run_test 27e "setstripe existing file (should return error)"
test_27f() {
test_mkdir $DIR/$tdir
- $SETSTRIPE -S 100 -i 0 -c 1 $DIR/$tdir/$tfile &&
+ $LFS setstripe -S 100 -i 0 -c 1 $DIR/$tdir/$tfile &&
error "$SETSTRIPE $DIR/$tdir/$tfile failed"
$CHECKSTAT -t file $DIR/$tdir/$tfile &&
error "$CHECKSTAT -t file $DIR/$tdir/$tfile should fail"
dd if=/dev/zero of=$DIR/$tdir/$tfile bs=4k count=4 || error "dd failed"
- $GETSTRIPE $DIR/$tdir/$tfile || error "$GETSTRIPE failed"
+ $LFS getstripe $DIR/$tdir/$tfile || error "$LFS getstripe failed"
}
run_test 27f "setstripe with bad stripe size (should return error)"
test_27g() {
- test_mkdir -p $DIR/d27
- $MCREATE $DIR/d27/fnone || error "mcreate failed"
- $GETSTRIPE $DIR/d27/fnone 2>&1 | grep "no stripe info" ||
- error "$DIR/d27/fnone has object"
+ test_mkdir $DIR/$tdir
+ $MCREATE $DIR/$tdir/$tfile || error "mcreate failed"
+ $LFS getstripe $DIR/$tdir/$tfile 2>&1 | grep "no stripe info" ||
+ error "$DIR/$tdir/$tfile has object"
}
-run_test 27g "$GETSTRIPE with no objects"
+run_test 27g "$LFS getstripe with no objects"
test_27i() {
test_mkdir $DIR/$tdir
touch $DIR/$tdir/$tfile || error "touch failed"
- [[ $($GETSTRIPE -c $DIR/$tdir/$tfile) -gt 0 ]] ||
+ [[ $($LFS getstripe -c $DIR/$tdir/$tfile) -gt 0 ]] ||
error "missing objects"
}
-run_test 27i "$GETSTRIPE with some objects"
+run_test 27i "$LFS getstripe with some objects"
test_27j() {
- test_mkdir -p $DIR/d27
- $SETSTRIPE -i $OSTCOUNT $DIR/d27/f27j && error "setstripe failed"||true
+ test_mkdir $DIR/$tdir
+ $LFS setstripe -i $OSTCOUNT $DIR/$tdir/$tfile &&
+ error "setstripe failed" || true
}
run_test 27j "setstripe with bad stripe offset (should return error)"
test_27k() { # bug 2844
- test_mkdir -p $DIR/d27
- FILE=$DIR/d27/f27k
- LL_MAX_BLKSIZE=$((4 * 1024 * 1024))
- [ ! -d $DIR/d27 ] && test_mkdir -p $DIR d27
- $SETSTRIPE -S 67108864 $FILE || error "setstripe failed"
- BLKSIZE=`stat $FILE | awk '/IO Block:/ { print $7 }'`
- [ $BLKSIZE -le $LL_MAX_BLKSIZE ] || error "1:$BLKSIZE > $LL_MAX_BLKSIZE"
- dd if=/dev/zero of=$FILE bs=4k count=1
- BLKSIZE=`stat $FILE | awk '/IO Block:/ { print $7 }'`
- [ $BLKSIZE -le $LL_MAX_BLKSIZE ] || error "2:$BLKSIZE > $LL_MAX_BLKSIZE"
-}
-run_test 27k "limit i_blksize for broken user apps ============="
+ test_mkdir $DIR/$tdir
+ local file=$DIR/$tdir/$tfile
+ local ll_max_blksize=$((4 * 1024 * 1024))
+ $LFS setstripe -S 67108864 $file || error "setstripe failed"
+ local blksize=$(stat $file | awk '/IO Block:/ { print $7 }')
+ [ $blksize -le $ll_max_blksize ] || error "1:$blksize > $ll_max_blksize"
+ dd if=/dev/zero of=$file bs=4k count=1
+ blksize=$(stat $file | awk '/IO Block:/ { print $7 }')
+ [ $blksize -le $ll_max_blksize ] || error "2:$blksize > $ll_max_blksize"
+}
+run_test 27k "limit i_blksize for broken user apps"
test_27l() {
- test_mkdir -p $DIR/d27
- mcreate $DIR/f27l || error "creating file"
- $RUNAS $SETSTRIPE -c 1 $DIR/f27l && \
+ mcreate $DIR/$tfile || error "creating file"
+ $RUNAS $LFS setstripe -c 1 $DIR/$tfile &&
error "setstripe should have failed" || true
}
run_test 27l "check setstripe permissions (should return error)"
test_27m() {
- [[ $OSTCOUNT -lt 2 ]] && skip_env "$OSTCOUNT < 2 OSTs -- skipping" &&
- return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
ORIGFREE=$($LCTL get_param -n lov.$FSNAME-clilov-*.kbytesavail |
head -n1)
return
fi
trap simple_cleanup_common EXIT
- test_mkdir -p $DIR/$tdir
- $SETSTRIPE -i 0 -c 1 $DIR/$tdir/f27m_1
- dd if=/dev/zero of=$DIR/$tdir/f27m_1 bs=1024 count=$MAXFREE &&
+ test_mkdir $DIR/$tdir
+ $LFS setstripe -i 0 -c 1 $DIR/$tdir/$tfile.1
+ dd if=/dev/zero of=$DIR/$tdir/$tfile.1 bs=1024 count=$MAXFREE &&
error "dd should fill OST0"
i=2
- while $SETSTRIPE -i 0 -c 1 $DIR/$tdir/f27m_$i; do
+ while $LFS setstripe -i 0 -c 1 $DIR/$tdir/$tfile.$i; do
i=$((i + 1))
[ $i -gt 256 ] && break
done
i=$((i + 1))
- touch $DIR/$tdir/f27m_$i
- [ `$GETSTRIPE $DIR/$tdir/f27m_$i | grep -A 10 obdidx | awk '{print $1}'| grep -w "0"` ] &&
+ touch $DIR/$tdir/$tfile.$i
+ [ $($LFS getstripe $DIR/$tdir/$tfile.$i | grep -A 10 obdidx |
+ awk '{print $1}'| grep -w "0") ] &&
error "OST0 was full but new created file still use it"
i=$((i + 1))
- touch $DIR/$tdir/f27m_$i
- [ `$GETSTRIPE $DIR/$tdir/f27m_$i | grep -A 10 obdidx | awk '{print $1}'| grep -w "0"` ] &&
+ touch $DIR/$tdir/$tfile.$i
+ [ $($LFS getstripe $DIR/$tdir/$tfile.$i | grep -A 10 obdidx |
+ awk '{print $1}'| grep -w "0") ] &&
error "OST0 was full but new created file still use it"
simple_cleanup_common
}
-run_test 27m "create file while OST0 was full =================="
+run_test 27m "create file while OST0 was full"
sleep_maxage() {
- local DELAY=$(do_facet $SINGLEMDS lctl get_param -n lov.*.qos_maxage | head -n 1 | awk '{print $1 * 2}')
- sleep $DELAY
+ local delay=$(do_facet $SINGLEMDS lctl get_param -n lov.*.qos_maxage |
+ head -n 1 | awk '{ print $1 * 2 }')
+ sleep $delay
}
# OSCs keep a NOSPC flag that will be reset after ~5s (qos_maxage)
}
test_27n() {
- [[ $OSTCOUNT -lt 2 ]] && skip_env "too few OSTs" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_enospc
rm -f $DIR/$tdir/$tfile
exhaust_precreations 0 0x80000215
- $SETSTRIPE -c -1 $DIR/$tdir
+ $LFS setstripe -c -1 $DIR/$tdir
touch $DIR/$tdir/$tfile || error
- $GETSTRIPE $DIR/$tdir/$tfile
+ $LFS getstripe $DIR/$tdir/$tfile
reset_enospc
}
-run_test 27n "create file with some full OSTs =================="
+run_test 27n "create file with some full OSTs"
test_27o() {
- [[ $OSTCOUNT -lt 2 ]] && skip_env "too few OSTs" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_enospc
rm -rf $DIR/$tdir/*
}
-run_test 27o "create file with all full OSTs (should error) ===="
+run_test 27o "create file with all full OSTs (should error)"
test_27p() {
- [[ $OSTCOUNT -lt 2 ]] && skip_env "too few OSTs" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_enospc
rm -f $DIR/$tdir/$tfile
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
$MCREATE $DIR/$tdir/$tfile || error "mcreate failed"
$TRUNCATE $DIR/$tdir/$tfile 80000000 || error "truncate failed"
exhaust_precreations 0 0x80000215
echo foo >> $DIR/$tdir/$tfile || error "append failed"
$CHECKSTAT -s 80000004 $DIR/$tdir/$tfile || error "checkstat failed"
- $GETSTRIPE $DIR/$tdir/$tfile
+ $LFS getstripe $DIR/$tdir/$tfile
reset_enospc
}
-run_test 27p "append to a truncated file with some full OSTs ==="
+run_test 27p "append to a truncated file with some full OSTs"
test_27q() {
- [[ $OSTCOUNT -lt 2 ]] && skip_env "too few OSTs" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_enospc
rm -f $DIR/$tdir/$tfile
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
$MCREATE $DIR/$tdir/$tfile || error "mcreate $DIR/$tdir/$tfile failed"
- $TRUNCATE $DIR/$tdir/$tfile 80000000 ||error "truncate $DIR/$tdir/$tfile failed"
+ $TRUNCATE $DIR/$tdir/$tfile 80000000 ||
+ error "truncate $DIR/$tdir/$tfile failed"
$CHECKSTAT -s 80000000 $DIR/$tdir/$tfile || error "checkstat failed"
exhaust_all_precreations 0x215
reset_enospc
}
-run_test 27q "append to truncated file with all OSTs full (should error) ==="
+run_test 27q "append to truncated file with all OSTs full (should error)"
test_27r() {
- [[ $OSTCOUNT -lt 2 ]] && skip_env "too few OSTs" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
rm -f $DIR/$tdir/$tfile
exhaust_precreations 0 0x80000215
- $SETSTRIPE -i 0 -c 2 $DIR/$tdir/$tfile # && error
+ $LFS setstripe -i 0 -c 2 $DIR/$tdir/$tfile # && error
reset_enospc
}
run_test 27r "stripe file with some full OSTs (shouldn't LBUG) ="
test_27s() { # bug 10725
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
local stripe_size=$((4096 * 1024 * 1024)) # 2^32
local stripe_count=0
[ $OSTCOUNT -eq 1 ] || stripe_count=2
- $SETSTRIPE -S $stripe_size -c $stripe_count $DIR/$tdir &&
+ $LFS setstripe -S $stripe_size -c $stripe_count $DIR/$tdir &&
error "stripe width >= 2^32 succeeded" || true
}
run_test 27t "check that utils parse path correctly"
test_27u() { # bug 4900
- [[ $OSTCOUNT -lt 2 ]] && skip_env "too few OSTs" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
local index
local list=$(comma_list $(mdts_nodes))
do_nodes $list $LCTL set_param fail_loc=0
TLOG=$TMP/$tfile.getstripe
- $GETSTRIPE $DIR/$tdir > $TLOG
+ $LFS getstripe $DIR/$tdir > $TLOG
OBJS=$(awk -vobj=0 '($1 == 0) { obj += 1 } END { print obj; }' $TLOG)
unlinkmany $DIR/$tdir/t- 1000
trap 0
[[ $OBJS -gt 0 ]] &&
error "$OBJS objects created on OST-0. See $TLOG" || pass
}
-run_test 27u "skip object creation on OSC w/o objects =========="
+run_test 27u "skip object creation on OSC w/o objects"
test_27v() { # bug 4900
- [[ $OSTCOUNT -lt 2 ]] && skip_env "too few OSTs" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
- remote_ost_nodsh && skip "remote OST with nodsh" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
- exhaust_all_precreations 0x215
- reset_enospc
+ exhaust_all_precreations 0x215
+ reset_enospc
- test_mkdir -p $DIR/$tdir
- $SETSTRIPE -c 1 $DIR/$tdir # 1 stripe / file
+ $LFS setstripe -c 1 $DIR/$tdir # 1 stripe / file
touch $DIR/$tdir/$tfile
#define OBD_FAIL_TGT_DELAY_PRECREATE 0x705
sleep $((TIMEOUT / 2 - PROCESS))
reset_enospc
}
-run_test 27v "skip object creation on slow OST ================="
+run_test 27v "skip object creation on slow OST"
test_27w() { # bug 10997
- test_mkdir -p $DIR/$tdir || error "mkdir failed"
- $SETSTRIPE -S 65536 $DIR/$tdir/f0 || error "setstripe failed"
- [ $($GETSTRIPE -S $DIR/$tdir/f0) -ne 65536 ] &&
- error "stripe size $size != 65536" || true
- [ $($GETSTRIPE -d $DIR/$tdir | grep -c "stripe_count") -ne 1 ] &&
- error "$GETSTRIPE -d $DIR/$tdir failed" || true
+ test_mkdir $DIR/$tdir
+ $LFS setstripe -S 65536 $DIR/$tdir/f0 || error "setstripe failed"
+ [ $($LFS getstripe -S $DIR/$tdir/f0) -ne 65536 ] &&
+ error "stripe size $size != 65536" || true
+ [ $($LFS getstripe -d $DIR/$tdir | grep -c "stripe_count") -eq 0 ] &&
+ error "$LFS getstripe -d $DIR/$tdir no 'stripe_count'" || true
}
-run_test 27w "check $SETSTRIPE -S option"
+run_test 27w "check $LFS setstripe -S and getstrip -d options"
test_27wa() {
[[ $OSTCOUNT -lt 2 ]] &&
skip_env "skipping multiple stripe count/offset test" && return
- test_mkdir -p $DIR/$tdir || error "mkdir failed"
- for i in $(seq 1 $OSTCOUNT); do
- offset=$((i - 1))
- $SETSTRIPE -c $i -i $offset $DIR/$tdir/f$i ||
- error "setstripe -c $i -i $offset failed"
- count=$($GETSTRIPE -c $DIR/$tdir/f$i)
- index=$($GETSTRIPE -i $DIR/$tdir/f$i)
- [ $count -ne $i ] && error "stripe count $count != $i" || true
- [ $index -ne $offset ] &&
- error "stripe offset $index != $offset" || true
- done
+ test_mkdir $DIR/$tdir
+ for i in $(seq 1 $OSTCOUNT); do
+ offset=$((i - 1))
+ $LFS setstripe -c $i -i $offset $DIR/$tdir/f$i ||
+ error "setstripe -c $i -i $offset failed"
+ count=$($LFS getstripe -c $DIR/$tdir/f$i)
+ index=$($LFS getstripe -i $DIR/$tdir/f$i)
+ [ $count -ne $i ] && error "stripe count $count != $i" || true
+ [ $index -ne $offset ] &&
+ error "stripe offset $index != $offset" || true
+ done
}
-run_test 27wa "check $SETSTRIPE -c -i options"
+run_test 27wa "check $LFS setstripe -c -i options"
test_27x() {
remote_ost_nodsh && skip "remote OST with nodsh" && return
- [[ $OSTCOUNT -lt 2 ]] && skip_env "$OSTCOUNT < 2 OSTs" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
OFFSET=$(($OSTCOUNT - 1))
OSTIDX=0
local OST=$(ostname_from_index $OSTIDX)
- test_mkdir -p $DIR/$tdir
- $SETSTRIPE -c 1 $DIR/$tdir # 1 stripe per file
+ test_mkdir $DIR/$tdir
+ $LFS setstripe -c 1 $DIR/$tdir # 1 stripe per file
do_facet ost$((OSTIDX + 1)) lctl set_param -n obdfilter.$OST.degraded 1
sleep_maxage
createmany -o $DIR/$tdir/$tfile $OSTCOUNT
- for i in `seq 0 $OFFSET`; do
- [ `$GETSTRIPE $DIR/$tdir/$tfile$i | grep -A 10 obdidx | awk '{print $1}' | grep -w "$OSTIDX"` ] &&
+ for i in $(seq 0 $OFFSET); do
+ [ $($LFS getstripe $DIR/$tdir/$tfile$i | grep -A 10 obdidx |
+ awk '{print $1}' | grep -w "$OSTIDX") ] &&
error "OST0 was degraded but new created file still use it"
done
do_facet ost$((OSTIDX + 1)) lctl set_param -n obdfilter.$OST.degraded 0
run_test 27x "create files while OST0 is degraded"
test_27y() {
- [[ $OSTCOUNT -lt 2 ]] &&
- skip_env "$OSTCOUNT < 2 OSTs -- skipping" && return
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
- remote_ost_nodsh && skip "remote OST with nodsh" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- local mdtosc=$(get_mdtosc_proc_path $SINGLEMDS $FSNAME-OST0000)
- local last_id=$(do_facet $SINGLEMDS lctl get_param -n \
- osc.$mdtosc.prealloc_last_id)
- local next_id=$(do_facet $SINGLEMDS lctl get_param -n \
- osc.$mdtosc.prealloc_next_id)
- local fcount=$((last_id - next_id))
+ local mdtosc=$(get_mdtosc_proc_path $SINGLEMDS $FSNAME-OST0000)
+ local last_id=$(do_facet $SINGLEMDS lctl get_param -n \
+ osc.$mdtosc.prealloc_last_id)
+ local next_id=$(do_facet $SINGLEMDS lctl get_param -n \
+ osc.$mdtosc.prealloc_next_id)
+ local fcount=$((last_id - next_id))
[[ $fcount -eq 0 ]] && skip "not enough space on OST0" && return
[[ $fcount -gt $OSTCOUNT ]] && fcount=$OSTCOUNT
done
OSTIDX=$(index_from_ostuuid $OST)
- test_mkdir -p $DIR/$tdir
- $SETSTRIPE -c 1 $DIR/$tdir # 1 stripe / file
+ test_mkdir $DIR/$tdir
+ $LFS setstripe -c 1 $DIR/$tdir # 1 stripe / file
for OSC in $MDS_OSCS; do
OST=$(osc_to_ost $OSC)
done
# all osp devices get activated, hence -1 stripe count restored
- local stripecnt=0
+ local stripe_count=0
# sleep 2*lod_qos_maxage seconds waiting for lod qos to notice osp
# devices get activated.
sleep_maxage
- $SETSTRIPE -c -1 $DIR/$tfile
- stripecnt=$($GETSTRIPE -c $DIR/$tfile)
+ $LFS setstripe -c -1 $DIR/$tfile
+ stripe_count=$($LFS getstripe -c $DIR/$tfile)
rm -f $DIR/$tfile
- [ $stripecnt -ne $OSTCOUNT ] &&
- error "Of $OSTCOUNT OSTs, only $stripecnt is available"
+ [ $stripe_count -ne $OSTCOUNT ] &&
+ error "Of $OSTCOUNT OSTs, only $stripe_count is available"
return 0
}
run_test 27y "create files while OST0 is degraded and the rest inactive"
ff_pstripe=$(cut -d: -f3 <<<$ff_parent | sed -e 's/]//')
fi
- if grep -q 'stripe_count=' <<<$ff; then
- local ff_scnt=$(sed -e 's/.*stripe_count=//' \
- -e 's/ .*//' <<<$ff)
- [ $lmm_count = $ff_scnt ] ||
- error "FF stripe count $lmm_count != $ff_scnt"
- fi
# compare lmm_seq and filter_fid->ff_parent.f_seq
[ $ff_pseq = $lmm_seq ] ||
error "FF parent SEQ $ff_pseq != $lmm_seq"
error "FF stripe $ff_pstripe != $stripe_nr"
stripe_nr=$((stripe_nr + 1))
+ [ $(lustre_version_code client) -lt $(version_code 2.9.55) ] &&
+ continue
+ if grep -q 'stripe_count=' <<<$ff; then
+ local ff_scnt=$(sed -e 's/.*stripe_count=//' \
+ -e 's/ .*//' <<<$ff)
+ [ $lmm_count = $ff_scnt ] ||
+ error "FF stripe count $lmm_count != $ff_scnt"
+ fi
done
}
test_27z() {
- remote_ost_nodsh && skip "remote OST with nodsh" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- test_mkdir -p $DIR/$tdir
-
- $SETSTRIPE -c 1 -i 0 -S 64k $DIR/$tdir/$tfile-1 ||
- { error "setstripe -c -1 failed"; return 1; }
- # We need to send a write to every object to get parent FID info set.
- # This _should_ also work for setattr, but does not currently.
- # touch $DIR/$tdir/$tfile-1 ||
- dd if=/dev/zero of=$DIR/$tdir/$tfile-1 bs=1M count=1 ||
- { error "dd $tfile-1 failed"; return 2; }
- $SETSTRIPE -c -1 -i $((OSTCOUNT - 1)) -S 1M $DIR/$tdir/$tfile-2 ||
- { error "setstripe -c -1 failed"; return 3; }
- dd if=/dev/zero of=$DIR/$tdir/$tfile-2 bs=1M count=$OSTCOUNT ||
- { error "dd $tfile-2 failed"; return 4; }
-
- # make sure write RPCs have been sent to OSTs
- sync; sleep 5; sync
-
- check_seq_oid $DIR/$tdir/$tfile-1 || return 5
- check_seq_oid $DIR/$tdir/$tfile-2 || return 6
+ test_mkdir $DIR/$tdir
+
+ $LFS setstripe -c 1 -i 0 -S 64k $DIR/$tdir/$tfile-1 ||
+ { error "setstripe -c -1 failed"; return 1; }
+ # We need to send a write to every object to get parent FID info set.
+ # This _should_ also work for setattr, but does not currently.
+ # touch $DIR/$tdir/$tfile-1 ||
+ dd if=/dev/zero of=$DIR/$tdir/$tfile-1 bs=1M count=1 ||
+ { error "dd $tfile-1 failed"; return 2; }
+ $LFS setstripe -c -1 -i $((OSTCOUNT - 1)) -S 1M $DIR/$tdir/$tfile-2 ||
+ { error "setstripe -c -1 failed"; return 3; }
+ dd if=/dev/zero of=$DIR/$tdir/$tfile-2 bs=1M count=$OSTCOUNT ||
+ { error "dd $tfile-2 failed"; return 4; }
+
+ # make sure write RPCs have been sent to OSTs
+ sync; sleep 5; sync
+
+ check_seq_oid $DIR/$tdir/$tfile-1 || return 5
+ check_seq_oid $DIR/$tdir/$tfile-2 || return 6
}
run_test 27z "check SEQ/OID on the MDT and OST filesystems"
run_test 27A "check filesystem-wide default LOV EA values"
test_27B() { # LU-2523
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
rm -f $DIR/$tdir/f0 $DIR/$tdir/f1
touch $DIR/$tdir/f0
# open f1 with O_LOV_DELAY_CREATE
local i
local j
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
cd $DIR/$tdir
for i in $(seq 0 $((OSTCOUNT - 1))); do
# set stripe across all OSTs starting from OST$i
local ost_list=$(seq $first_ost $ost_step $last_ost)
local ost_range="$first_ost $last_ost $ost_step"
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
pool_add $POOL || error "pool_add failed"
pool_add_targets $POOL $ost_range || error "pool_add_targets failed"
local skip27D
[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.55) ] &&
skip27D += "-s 29"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.9.55) ] &&
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.9.55) -o \
+ $(lustre_version_code client) -lt $(version_code 2.9.55) ] &&
skip27D += "-s 30,31"
llapi_layout_test -d$DIR/$tdir -p$POOL -o$OSTCOUNT $skip27D ||
error "llapi_layout_test failed"
skip "Need MDS version at least 2.8.51" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
rm -f $DIR/$tdir/f0
$SETSTRIPE -c 2 $DIR/$tdir
}
test_31o() { # LU-2901
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
for LOOP in $(seq 100); do
rm -f $DIR/$tdir/$tfile*
for THREAD in $(seq 8); do
ls -al $DIR/$tdir/ext2-mountpoint/../d2/test_dir || error
cleanup_test32_mount
}
-run_test 32d "open d32d/ext2-mountpoint/../d2/test_dir ========="
+run_test 32d "open d32d/ext2-mountpoint/../d2/test_dir"
test_32e() {
- [ -e $DIR/d32e ] && rm -fr $DIR/d32e
- test_mkdir -p $DIR/d32e/tmp
- TMP_DIR=$DIR/d32e/tmp
- ln -s $DIR/d32e $TMP_DIR/symlink11
- ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
- $CHECKSTAT -t link $DIR/d32e/tmp/symlink11 || error
- $CHECKSTAT -t link $DIR/d32e/symlink01 || error
+ rm -fr $DIR/$tdir
+ test_mkdir -p $DIR/$tdir/tmp
+ local tmp_dir=$DIR/$tdir/tmp
+ ln -s $DIR/$tdir $tmp_dir/symlink11
+ ln -s $tmp_dir/symlink11 $tmp_dir/../symlink01
+ $CHECKSTAT -t link $DIR/$tdir/tmp/symlink11 || error "symlink11 bad"
+ $CHECKSTAT -t link $DIR/$tdir/symlink01 || error "symlink01 bad"
}
-run_test 32e "stat d32e/symlink->tmp/symlink->lustre-subdir ===="
+run_test 32e "stat d32e/symlink->tmp/symlink->lustre-subdir"
test_32f() {
- [ -e $DIR/d32f ] && rm -fr $DIR/d32f
- test_mkdir -p $DIR/d32f/tmp
- TMP_DIR=$DIR/d32f/tmp
- ln -s $DIR/d32f $TMP_DIR/symlink11
- ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
- ls $DIR/d32f/tmp/symlink11 || error
- ls $DIR/d32f/symlink01 || error
+ rm -fr $DIR/$tdir
+ test_mkdir -p $DIR/$tdir/tmp
+ local tmp_dir=$DIR/$tdir/tmp
+ ln -s $DIR/$tdir $tmp_dir/symlink11
+ ln -s $tmp_dir/symlink11 $tmp_dir/../symlink01
+ ls $DIR/$tdir/tmp/symlink11 || error "symlink11 bad"
+ ls $DIR/$tdir/symlink01 || error "symlink01 bad"
}
-run_test 32f "open d32f/symlink->tmp/symlink->lustre-subdir ===="
+run_test 32f "open d32f/symlink->tmp/symlink->lustre-subdir"
test_32g() {
- TMP_DIR=$DIR/$tdir/tmp
- test_mkdir -p $DIR/$tdir/tmp
+ local tmp_dir=$DIR/$tdir/tmp
+ test_mkdir -p $tmp_dir
test_mkdir $DIR/${tdir}2
- ln -s $DIR/${tdir}2 $TMP_DIR/symlink12
- ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
- $CHECKSTAT -t link $TMP_DIR/symlink12 || error
- $CHECKSTAT -t link $DIR/$tdir/symlink02 || error
- $CHECKSTAT -t dir -f $TMP_DIR/symlink12 || error
- $CHECKSTAT -t dir -f $DIR/$tdir/symlink02 || error
+ ln -s $DIR/${tdir}2 $tmp_dir/symlink12
+ ln -s $tmp_dir/symlink12 $tmp_dir/../symlink02
+ $CHECKSTAT -t link $tmp_dir/symlink12 || error "symlink12 not a link"
+ $CHECKSTAT -t link $DIR/$tdir/symlink02 || error "symlink02 not a link"
+ $CHECKSTAT -t dir -f $tmp_dir/symlink12 || error "symlink12 not a dir"
+ $CHECKSTAT -t dir -f $DIR/$tdir/symlink02 || error "symlink12 not a dir"
}
run_test 32g "stat d32g/symlink->tmp/symlink->lustre-subdir/${tdir}2"
test_32h() {
rm -fr $DIR/$tdir $DIR/${tdir}2
- TMP_DIR=$DIR/$tdir/tmp
- test_mkdir -p $DIR/$tdir/tmp
+ tmp_dir=$DIR/$tdir/tmp
+ test_mkdir -p $tmp_dir
test_mkdir $DIR/${tdir}2
- ln -s $DIR/${tdir}2 $TMP_DIR/symlink12
- ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
- ls $TMP_DIR/symlink12 || error
- ls $DIR/$tdir/symlink02 || error
+ ln -s $DIR/${tdir}2 $tmp_dir/symlink12
+ ln -s $tmp_dir/symlink12 $tmp_dir/../symlink02
+ ls $tmp_dir/symlink12 || error "listing symlink12"
+ ls $DIR/$tdir/symlink02 || error "listing symlink02"
}
run_test 32h "open d32h/symlink->tmp/symlink->lustre-subdir/${tdir}2"
$RUNAS $OPENFILE -f O_RDWR $DIR/$tfile && error || true
log 33_2
}
-run_test 33aa "write file with mode 444 (should return error) ===="
+run_test 33aa "write file with mode 444 (should return error)"
test_33a() {
- rm -fr $DIR/d33
- test_mkdir -p $DIR/d33
- chown $RUNAS_ID $DIR/d33
- $RUNAS $OPENFILE -f O_RDWR:O_CREAT -m 0444 $DIR/d33/f33|| error "create"
- $RUNAS $OPENFILE -f O_RDWR:O_CREAT -m 0444 $DIR/d33/f33 && \
+ rm -fr $DIR/$tdir
+ test_mkdir $DIR/$tdir
+ chown $RUNAS_ID $DIR/$tdir
+ $RUNAS $OPENFILE -f O_RDWR:O_CREAT -m 0444 $DIR/$tdir/$tfile ||
+ error "$RUNAS create $tdir/$tfile failed"
+ $RUNAS $OPENFILE -f O_RDWR:O_CREAT -m 0444 $DIR/$tdir/$tfile &&
error "open RDWR" || true
}
run_test 33a "test open file(mode=0444) with O_RDWR (should return error)"
test_33b() {
- rm -fr $DIR/d33
- test_mkdir -p $DIR/d33
- chown $RUNAS_ID $DIR/d33
- $RUNAS $OPENFILE -f 1286739555 $DIR/d33/f33 || true
+ rm -fr $DIR/$tdir
+ test_mkdir $DIR/$tdir
+ chown $RUNAS_ID $DIR/$tdir
+ $RUNAS $OPENFILE -f 1286739555 $DIR/$tdir/$tfile || true
}
run_test 33b "test open file with malformed flags (No panic)"
test_33c() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- local ostnum
- local ostname
- local write_bytes
- local all_zeros
+ local ostnum
+ local ostname
+ local write_bytes
+ local all_zeros
- remote_ost_nodsh && skip "remote OST with nodsh" && return
- all_zeros=:
- rm -fr $DIR/d33
- test_mkdir -p $DIR/d33
- # Read: 0, Write: 4, create/destroy: 2/0, stat: 1, punch: 0
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
+ all_zeros=:
+ rm -fr $DIR/$tdir
+ test_mkdir $DIR/$tdir
+ # Read: 0, Write: 4, create/destroy: 2/0, stat: 1, punch: 0
sync
for ostnum in $(seq $OSTCOUNT); do
$all_zeros || return 0
- # Write four bytes
- echo foo > $DIR/d33/bar
- # Really write them
- sync
+ # Write four bytes
+ echo foo > $DIR/$tdir/bar
+ # Really write them
+ sync
# Total up write_bytes after writing. We'd better find non-zeros.
for ostnum in $(seq $OSTCOUNT); do
local MDTIDX=1
local remote_dir=$DIR/$tdir/remote_dir
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
$LFS mkdir -i $MDTIDX $remote_dir ||
error "create remote directory failed"
$RUNAS $DIR/f35a && error || true
rm $DIR/f35a
}
-run_test 35a "exec file with mode 444 (should return and not leak) ====="
+run_test 35a "exec file with mode 444 (should return and not leak)"
test_36a() {
rm -f $DIR/f36
utime $DIR/f36 || error
}
-run_test 36a "MDS utime check (mknod, utime) ==================="
+run_test 36a "MDS utime check (mknod, utime)"
test_36b() {
echo "" > $DIR/f36
utime $DIR/f36 || error
}
-run_test 36b "OST utime check (open, utime) ===================="
+run_test 36b "OST utime check (open, utime)"
test_36c() {
rm -f $DIR/d36/f36
chown $RUNAS_ID $DIR/d36
$RUNAS utime $DIR/d36/f36 || error
}
-run_test 36c "non-root MDS utime check (mknod, utime) =========="
+run_test 36c "non-root MDS utime check (mknod, utime)"
test_36d() {
[ ! -d $DIR/d36 ] && test_36c
echo "" > $DIR/d36/f36
$RUNAS utime $DIR/d36/f36 || error
}
-run_test 36d "non-root OST utime check (open, utime) ==========="
+run_test 36d "non-root OST utime check (open, utime)"
test_36e() {
[ $RUNAS_ID -eq $UID ] && skip_env "RUNAS_ID = UID = $UID -- skipping" && return
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
touch $DIR/$tdir/$tfile
- $RUNAS utime $DIR/$tdir/$tfile && \
+ $RUNAS utime $DIR/$tdir/$tfile &&
error "utime worked, expected failure" || true
}
-run_test 36e "utime on non-owned file (should return error) ===="
+run_test 36e "utime on non-owned file (should return error)"
subr_36fh() {
local fl="$1"
export LANG=C LC_LANG=C # for date language
DATESTR="Dec 20 2000"
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
lctl set_param fail_loc=$fl
date; date +%s
cp /etc/hosts $DIR/$tdir/$tfile
local fmd_before
local fmd_after
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
fmd_max_age=$(do_facet ost1 \
"lctl get_param -n obdfilter.*.client_cache_seconds 2> /dev/null | \
head -n 1")
error "O_TRUNC didn't change timestamps"
fi
}
-run_test 39a "mtime changed on create ==========================="
+run_test 39a "mtime changed on create"
test_39b() {
- test_mkdir -p -c1 $DIR/$tdir
+ test_mkdir -c1 $DIR/$tdir
cp -p /etc/passwd $DIR/$tdir/fopen
cp -p /etc/passwd $DIR/$tdir/flink
cp -p /etc/passwd $DIR/$tdir/funlink
error "wrong links count $links1 != $links3"
return 0
}
-run_test 39o "directory cached attributes updated after create ========"
+run_test 39o "directory cached attributes updated after create"
test_39p() {
[[ $MDSCOUNT -lt 2 ]] && skip "needs >= 2 MDTs" && return
local MDTIDX=1
- TESTDIR=$DIR/$tdir/$tfile
+ TESTDIR=$DIR/$tdir/$tdir
[ -e $TESTDIR ] && rm -rf $TESTDIR
test_mkdir -p $TESTDIR
cd $TESTDIR
links1=2
ls
- $LFS mkdir -i $MDTIDX $TESTDIR/remote_dir1
- $LFS mkdir -i $MDTIDX $TESTDIR/remote_dir2
+ test_mkdir -i $MDTIDX $TESTDIR/remote_dir1
+ test_mkdir -i $MDTIDX $TESTDIR/remote_dir2
ls
links2=$(stat -c %h .)
[ $(($links1 + 2)) != $links2 ] &&
local max_dirty_mb
local warmup_files
- test_mkdir -p $DIR/${tdir}e
+ test_mkdir $DIR/${tdir}e
$SETSTRIPE -c 1 $TDIR
createmany -o $TDIR/f $files
run_test 42e "verify sub-RPC writes are not done synchronously"
test_43A() { # was test_43
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
cp -p /bin/ls $DIR/$tdir/$tfile
$MULTIOP $DIR/$tdir/$tfile Ow_c &
pid=$!
run_test 43c "md5sum of copy into lustre"
test_44A() { # was test_44
- [[ $OSTCOUNT -lt 2 ]] && skip_env "skipping 2-stripe test" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
dd if=/dev/zero of=$DIR/f1 bs=4k count=1 seek=1023
dd if=$DIR/f1 bs=4k count=1 > /dev/null
}
test_mkdir $DIR/$tdir
cd $DIR/$tdir
mv $DIR/$tdir $DIR/$tdir.new || error "move directory failed"
- test_mkdir $DIR/$tdir || error "recreate directory failed"
+ test_mkdir $DIR/$tdir
touch foo || error "'touch foo' failed after recreating cwd"
- test_mkdir bar || error "'mkdir foo' failed after recreating cwd"
+ test_mkdir bar
touch .foo || error "'touch .foo' failed after recreating cwd"
- test_mkdir .bar || error "'mkdir .foo' failed after recreating cwd"
+ test_mkdir .bar
ls . > /dev/null || error "'ls .' failed after recreating cwd"
ls .. > /dev/null || error "'ls ..' failed after removing cwd"
cd . || error "'cd .' failed after recreating cwd"
- test_mkdir . && error "'mkdir .' worked after recreating cwd"
+ mkdir . && error "'mkdir .' worked after recreating cwd"
rmdir . && error "'rmdir .' worked after recreating cwd"
ln -s . baz || error "'ln -s .' failed after recreating cwd"
cd .. || error "'cd ..' failed after recreating cwd"
cd $DIR/$tdir
rmdir $DIR/$tdir || error "remove cwd $DIR/$tdir failed"
touch foo && error "'touch foo' worked after removing cwd"
- test_mkdir foo && error "'mkdir foo' worked after removing cwd"
+ mkdir foo && error "'mkdir foo' worked after removing cwd"
touch .foo && error "'touch .foo' worked after removing cwd"
- test_mkdir .foo && error "'mkdir .foo' worked after removing cwd"
+ mkdir .foo && error "'mkdir .foo' worked after removing cwd"
ls . > /dev/null && error "'ls .' worked after removing cwd"
ls .. > /dev/null || error "'ls ..' failed after removing cwd"
- test_mkdir . && error "'mkdir .' worked after removing cwd"
+ mkdir . && error "'mkdir .' worked after removing cwd"
rmdir . && error "'rmdir .' worked after removing cwd"
ln -s . foo && error "'ln -s .' worked after removing cwd"
cd .. || echo "'cd ..' failed after removing cwd `pwd`" #bug 3517
cd $DIR/$tdir/dir
$TRACE rmdir $DIR/$tdir/dir || error "remove cwd $DIR/$tdir/dir failed"
$TRACE touch foo && error "touch foo worked after removing cwd"
- $TRACE test_mkdir foo && error "'mkdir foo' worked after removing cwd"
+ $TRACE mkdir foo && error "'mkdir foo' worked after removing cwd"
touch .foo && error "touch .foo worked after removing cwd"
- test_mkdir .foo && error "mkdir .foo worked after removing cwd"
+ mkdir .foo && error "mkdir .foo worked after removing cwd"
$TRACE ls . && error "'ls .' worked after removing cwd"
$TRACE ls .. || error "'ls ..' failed after removing cwd"
- $TRACE test_mkdir . && error "'mkdir .' worked after removing cwd"
+ $TRACE mkdir . && error "'mkdir .' worked after removing cwd"
$TRACE rmdir . && error "'rmdir .' worked after removing cwd"
$TRACE ln -s . foo && error "'ln -s .' worked after removing cwd"
$TRACE cd .. || echo "'cd ..' failed after removing cwd `pwd`" #bug 3415
$TRACE rmdir $DIR/$tdir/dir || error "remove cwd $DIR/$tdir/dir failed"
$TRACE rmdir $DIR/$tdir || error "remove parent $DIR/$tdir failed"
$TRACE touch foo && error "'touch foo' worked after removing parent"
- $TRACE test_mkdir foo && error "mkdir foo worked after removing parent"
+ $TRACE mkdir foo && error "mkdir foo worked after removing parent"
touch .foo && error "'touch .foo' worked after removing parent"
- test_mkdir .foo && error "mkdir .foo worked after removing parent"
+ mkdir .foo && error "mkdir .foo worked after removing parent"
$TRACE ls . && error "'ls .' worked after removing parent"
$TRACE ls .. && error "'ls ..' worked after removing parent"
- $TRACE test_mkdir . && error "'mkdir .' worked after removing parent"
+ $TRACE mkdir . && error "'mkdir .' worked after removing parent"
$TRACE rmdir . && error "'rmdir .' worked after removing parent"
$TRACE ln -s . foo && error "'ln -s .' worked after removing parent"
true
# cleanup the directory
rm -fr $dir
- test_mkdir -p -c1 $dir
+ test_mkdir -c1 $dir
$LFS df
$LFS df -i
test_51d() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- [[ $OSTCOUNT -lt 3 ]] &&
- skip_env "skipping test with few OSTs" && return
- test_mkdir -p $DIR/$tdir
+ [[ $OSTCOUNT -lt 3 ]] && skip_env "needs >= 3 OSTs" && return
+ test_mkdir $DIR/$tdir
createmany -o $DIR/$tdir/t- 1000
- $GETSTRIPE $DIR/$tdir > $TMP/$tfile
+ $LFS getstripe $DIR/$tdir > $TMP/$tfile
for N in $(seq 0 $((OSTCOUNT - 1))); do
OBJS[$N]=$(awk -vobjs=0 '($1 == '$N') { objs += 1 } \
END { printf("%0.0f", objs) }' $TMP/$tfile)
test_51e() {
if [ "$(facet_fstype $SINGLEMDS)" != ldiskfs ]; then
- skip "Only applicable to ldiskfs-based MDTs"
+ skip "ldiskfs only test"
return
fi
- test_mkdir -c1 $DIR/$tdir || error "create $tdir failed"
- test_mkdir -c1 $DIR/$tdir/d0 || error "create d0 failed"
+ test_mkdir -c1 $DIR/$tdir
+ test_mkdir -c1 $DIR/$tdir/d0
touch $DIR/$tdir/d0/foo
createmany -l $DIR/$tdir/d0/foo $DIR/$tdir/d0/f- 65001 &&
test_52a() {
[ -f $DIR/$tdir/foo ] && chattr -a $DIR/$tdir/foo
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
touch $DIR/$tdir/foo
chattr +a $DIR/$tdir/foo || error "chattr +a failed"
echo bar >> $DIR/$tdir/foo || error "append bar failed"
test_52b() {
[ -f $DIR/$tdir/foo ] && chattr -i $DIR/$tdir/foo
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
touch $DIR/$tdir/foo
chattr +i $DIR/$tdir/foo || error "chattr +i failed"
cat test > $DIR/$tdir/foo && error "cat test worked"
losetup $loopdev $DIR/$tfile ||
error "can't set up $loopdev for $DIR/$tfile"
mkfs.ext2 $loopdev || error "mke2fs on $loopdev"
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
mount -t ext2 $loopdev $DIR/$tdir ||
error "error mounting $loopdev on $DIR/$tdir"
dd if=/dev/zero of=$DIR/$tdir/tmp bs=$(get_page_size client) count=30 ||
"found $NUMS, expected $EXPECTED"
done
}
-run_test 56h "check lfs find ! -name ============================="
+run_test 56h "check lfs find ! -name"
test_56i() {
- tdir=${tdir}i
- test_mkdir -p $DIR/$tdir
- UUID=$(ostuuid_from_index 0 $DIR/$tdir)
- CMD="$LFIND -ost $UUID $DIR/$tdir"
- OUT=$($CMD)
- [ -z "$OUT" ] || error "\"$CMD\" returned directory '$OUT'"
+ tdir=${tdir}i
+ test_mkdir $DIR/$tdir
+ UUID=$(ostuuid_from_index 0 $DIR/$tdir)
+ CMD="$LFIND -ost $UUID $DIR/$tdir"
+ OUT=$($CMD)
+ [ -z "$OUT" ] || error "'$CMD' returned directory '$OUT'"
}
-run_test 56i "check 'lfs find -ost UUID' skips directories ======="
+run_test 56i "check 'lfs find -ost UUID' skips directories"
test_56j() {
TDIR=$DIR/${tdir}g
run_test 56v "check 'lfs find -mdt match with lfs getstripe -M' ======="
test_56w() {
- [[ $OSTCOUNT -lt 2 ]] && skip_env "$OSTCOUNT < 2 OSTs -- skipping" &&
- return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
TDIR=$DIR/${tdir}w
- rm -rf $TDIR || error "remove $TDIR failed"
- setup_56 $NUMFILES $NUMDIRS "-c $OSTCOUNT" "-c1"
-
- local stripe_size
- stripe_size=$($GETSTRIPE -S -d $TDIR) ||
- error "$GETSTRIPE -S -d $TDIR failed"
- stripe_size=${stripe_size%% *}
-
- local file_size=$((stripe_size * OSTCOUNT))
- local file_num=$((NUMDIRS * NUMFILES + NUMFILES))
- local required_space=$((file_num * file_size))
-
- local free_space=$($LCTL get_param -n lov.$FSNAME-clilov-*.kbytesavail |
- head -n1)
- [[ $free_space -le $((required_space / 1024)) ]] &&
- skip_env "need at least $required_space bytes free space," \
- "have $free_space kbytes" && return
-
- local dd_bs=65536
- local dd_count=$((file_size / dd_bs))
-
- # write data into the files
- local i
- local j
- local file
- for i in $(seq 1 $NUMFILES); do
- file=$TDIR/file$i
- yes | dd bs=$dd_bs count=$dd_count of=$file >/dev/null 2>&1 ||
- error "write data into $file failed"
- done
- for i in $(seq 1 $NUMDIRS); do
- for j in $(seq 1 $NUMFILES); do
- file=$TDIR/dir$i/file$j
- yes | dd bs=$dd_bs count=$dd_count of=$file \
- >/dev/null 2>&1 ||
- error "write data into $file failed"
- done
- done
+ rm -rf $TDIR || error "remove $TDIR failed"
+ setup_56 $NUMFILES $NUMDIRS "-c $OSTCOUNT" "-c1"
- local expected=-1
- [[ $OSTCOUNT -gt 1 ]] && expected=$((OSTCOUNT - 1))
+ local stripe_size
+ stripe_size=$($GETSTRIPE -S -d $TDIR) ||
+ error "$GETSTRIPE -S -d $TDIR failed"
+ stripe_size=${stripe_size%% *}
- # lfs_migrate file
- local cmd="$LFS_MIGRATE -y -c $expected $TDIR/file1"
- echo "$cmd"
- eval $cmd || error "$cmd failed"
+ local file_size=$((stripe_size * OSTCOUNT))
+ local file_num=$((NUMDIRS * NUMFILES + NUMFILES))
+ local required_space=$((file_num * file_size))
+
+ local free_space=$($LCTL get_param -n lov.$FSNAME-clilov-*.kbytesavail |
+ head -n1)
+ [[ $free_space -le $((required_space / 1024)) ]] &&
+ skip_env "need $required_space bytes, have $free_space KB" &&
+ return
- check_stripe_count $TDIR/file1 $expected
+ local dd_bs=65536
+ local dd_count=$((file_size / dd_bs))
+
+ # write data into the files
+ local i
+ local j
+ local file
+ for i in $(seq 1 $NUMFILES); do
+ file=$TDIR/file$i
+ yes | dd bs=$dd_bs count=$dd_count of=$file &>/dev/null ||
+ error "write data into $file failed"
+ done
+ for i in $(seq 1 $NUMDIRS); do
+ for j in $(seq 1 $NUMFILES); do
+ file=$TDIR/dir$i/file$j
+ yes|dd bs=$dd_bs count=$dd_count of=$file &>/dev/null ||
+ error "write data into $file failed"
+ done
+ done
+
+ # $LFS_MIGRATE will fail if hard link migration is unsupported
+ if [[ $(lustre_version_code mds1) -gt $(version_code 2.5.55) ]]; then
+ createmany -l$TDIR/dir1/file1 $TDIR/dir1/link 200 ||
+ error "creating links to $TDIR/dir1/file1 failed"
+ fi
+
+ local expected=-1
+ [[ $OSTCOUNT -gt 1 ]] && expected=$((OSTCOUNT - 1))
+
+ # lfs_migrate file
+ local cmd="$LFS_MIGRATE -y -c $expected $TDIR/file1"
+ echo "$cmd"
+ eval $cmd || error "$cmd failed"
+
+ check_stripe_count $TDIR/file1 $expected
if [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.90) ];
then
test_56x() {
check_swap_layouts_support && return 0
- [[ $OSTCOUNT -lt 2 ]] &&
- skip_env "need 2 OST, skipping test" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
local dir0=$DIR/$tdir/$testnum
- test_mkdir -p $dir0 || error "creating dir $dir0"
+ test_mkdir -p $dir0
local ref1=/etc/passwd
local file1=$dir0/file1
test_56xa() {
check_swap_layouts_support && return 0
- [[ $OSTCOUNT -lt 2 ]] &&
- skip_env "need 2 OST, skipping test" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
local dir0=$DIR/$tdir/$testnum
- test_mkdir -p $dir0 || error "creating dir $dir0"
+ test_mkdir -p $dir0
local ref1=/etc/passwd
local file1=$dir0/file1
local res=""
local dir0=$DIR/$tdir/$testnum
- test_mkdir -p $dir0 || error "creating dir $dir0"
+ test_mkdir -p $dir0
local f1=$dir0/file1
local f2=$dir0/file2
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
# note test will not do anything if MDS is not local
if [ "$(facet_fstype $SINGLEMDS)" != ldiskfs ]; then
- skip "Only applicable to ldiskfs-based MDTs"
+ skip "ldiskfs only test"
return
fi
test_57b() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
if [ "$(facet_fstype $SINGLEMDS)" != ldiskfs ]; then
- skip "Only applicable to ldiskfs-based MDTs"
+ skip "ldiskfs only test"
return
fi
local FILEN=$dir/f$FILECOUNT
rm -rf $dir || error "removing $dir"
- test_mkdir -p -c1 $dir || error "creating $dir"
+ test_mkdir -c1 $dir
local mdtidx=$($LFS getstripe -M $dir)
local mdtname=MDT$(printf %04x $mdtidx)
local facet=mds$((mdtidx + 1))
log "$TEST60_HEAD - from kernel mode"
do_facet mgs "$LCTL set_param debug=warning; $LCTL dk > /dev/null"
- do_facet mgs sh run-llog.sh
+ do_facet mgs "sh run-llog.sh" || error "run-llog.sh failed"
do_facet mgs $LCTL dk > $TMP/$tfile
# LU-6388: test llog_reader
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
sh oos.sh $MOUNT || error "oos.sh failed: $?"
}
-run_test 64b "check out-of-space detection on client ==========="
+run_test 64b "check out-of-space detection on client"
test_64c() {
$LCTL set_param osc.*OST0000-osc-[^mM]*.cur_grant_bytes=0
}
-run_test 64c "verify grant shrink ========================------"
+run_test 64c "verify grant shrink"
# bug 1414 - set/get directories' stripe info
test_65a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
touch $DIR/$tdir/f1
$LVERIFY $DIR/$tdir $DIR/$tdir/f1 || error "lverify failed"
}
-run_test 65a "directory with no stripe info ===================="
+run_test 65a "directory with no stripe info"
test_65b() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
local STRIPESIZE=$($GETSTRIPE -S $DIR/$tdir)
$SETSTRIPE -S $((STRIPESIZE * 2)) -i 0 -c 1 $DIR/$tdir ||
test_65c() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- if [[ $OSTCOUNT -gt 1 ]]; then
- test_mkdir -p $DIR/$tdir
- local STRIPESIZE=$($GETSTRIPE -S $DIR/$tdir)
+ [ $OSTCOUNT -lt 2 ] && skip "need at least 2 OSTs" && return
+ test_mkdir $DIR/$tdir
+ local stripesize=$($GETSTRIPE -S $DIR/$tdir)
- $SETSTRIPE -S $(($STRIPESIZE * 4)) -i 1 \
- -c $(($OSTCOUNT - 1)) $DIR/$tdir || error "setstripe"
- touch $DIR/$tdir/f3
- $LVERIFY $DIR/$tdir $DIR/$tdir/f3 || error "lverify failed"
- fi
+ $LFS setstripe -S $((stripesize * 4)) -i 1 \
+ -c $((OSTCOUNT - 1)) $DIR/$tdir || error "setstripe"
+ touch $DIR/$tdir/f3
+ $LVERIFY $DIR/$tdir $DIR/$tdir/f3 || error "lverify failed"
}
run_test 65c "directory setstripe -S stripe_size*4 -i 1 -c $((OSTCOUNT-1))"
test_65d() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
local STRIPECOUNT=$($GETSTRIPE -c $DIR/$tdir)
local STRIPESIZE=$($GETSTRIPE -S $DIR/$tdir)
test_65e() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
$SETSTRIPE $DIR/$tdir || error "setstripe"
$GETSTRIPE -v $DIR/$tdir | grep "Default" ||
touch $DIR/$tdir/f6
$LVERIFY $DIR/$tdir $DIR/$tdir/f6 || error "lverify failed"
}
-run_test 65e "directory setstripe defaults ======================="
+run_test 65e "directory setstripe defaults"
test_65f() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- test_mkdir -p $DIR/${tdir}f
+ test_mkdir $DIR/${tdir}f
$RUNAS $SETSTRIPE $DIR/${tdir}f && error "setstripe succeeded" || true
}
run_test 65f "dir setstripe permission (should return error) ==="
test_65g() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
local STRIPESIZE=$($GETSTRIPE -S $DIR/$tdir)
- $SETSTRIPE -S $((STRIPESIZE * 2)) -i 0 -c 1 $DIR/$tdir ||
- error "setstripe"
- $SETSTRIPE -d $DIR/$tdir || error "setstripe"
- $GETSTRIPE -v $DIR/$tdir | grep "Default" ||
+ $LFS setstripe -S $((STRIPESIZE * 2)) -i 0 -c 1 $DIR/$tdir ||
+ error "setstripe -S failed"
+ $LFS setstripe -d $DIR/$tdir || error "setstripe -d failed"
+ $LFS getstripe -v $DIR/$tdir | grep "Default" ||
error "delete default stripe failed"
}
-run_test 65g "directory setstripe -d ==========================="
+run_test 65g "directory setstripe -d"
test_65h() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
local STRIPESIZE=$($GETSTRIPE -S $DIR/$tdir)
- $SETSTRIPE -S $((STRIPESIZE * 2)) -i 0 -c 1 $DIR/$tdir ||
- error "setstripe"
- test_mkdir -p $DIR/$tdir/dd1
- [ $($GETSTRIPE -c $DIR/$tdir) == $($GETSTRIPE -c $DIR/$tdir/dd1) ] ||
- error "stripe info inherit failed"
+ $LFS setstripe -S $((STRIPESIZE * 2)) -i 0 -c 1 $DIR/$tdir ||
+ error "setstripe -S failed"
+ test_mkdir $DIR/$tdir/dd1
+ [ $($LFS getstripe -c $DIR/$tdir) = $($GETSTRIPE -c $DIR/$tdir/dd1) ] ||
+ error "stripe info inherit failed"
}
run_test 65h "directory stripe info inherit ===================="
test_65k() { # bug11679
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- [[ $OSTCOUNT -lt 2 ]] && skip_env "too few OSTs" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
local disable_precreate=true
}
run_test 66 "update inode blocks count on client ==============="
-LLOOP=
-LLITELOOPLOAD=
-cleanup_68() {
- [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- trap 0
- if [ ! -z "$LLOOP" ]; then
- if swapon -s | grep -q $LLOOP; then
- swapoff $LLOOP || error "swapoff failed"
- fi
-
- $LCTL blockdev_detach $LLOOP || error "detach failed"
- rm -f $LLOOP
- unset LLOOP
- fi
- rm -f $DIR/f68*
-}
-
meminfo() {
awk '($1 == "'$1':") { print $2 }' /proc/meminfo
}
run_test 69 "verify oa2dentry return -ENOENT doesn't LBUG ======"
test_71() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
$LFS setdirstripe -D -c$MDSCOUNT $DIR/$tdir
sh rundbench -C -D $DIR/$tdir 2 || error "dbench failed!"
}
wait $MULTIPID1
wait $MULTIPID2
}
-run_test 82 "Basic grouplock test ==============================="
+run_test 82 "Basic grouplock test"
test_83() {
local sfile="/boot/System.map-$(uname -r)"
}
run_test 83 "Short write in ptask ==============================="
-test_99a() {
+test_99() {
[ -z "$(which cvs 2>/dev/null)" ] && skip_env "could not find cvs" &&
return
- test_mkdir -p $DIR/d99cvsroot
- chown $RUNAS_ID $DIR/d99cvsroot
- local oldPWD=$PWD # bug 13584, use $TMP as working dir
- cd $TMP
+ test_mkdir $DIR/$tdir.cvsroot
+ chown $RUNAS_ID $DIR/$tdir.cvsroot
- $RUNAS cvs -d $DIR/d99cvsroot init || error "cvs init failed"
- cd $oldPWD
-}
-run_test 99a "cvs init ========================================="
+ cd $TMP
+ $RUNAS cvs -d $DIR/$tdir.cvsroot init || error "cvs init failed"
-test_99b() {
- [ -z "$(which cvs 2>/dev/null)" ] &&
- skip_env "could not find cvs" && return
- [ ! -d $DIR/d99cvsroot ] && test_99a
cd /etc/init.d
# some versions of cvs import exit(1) when asked to import links or
# files they can't read. ignore those files.
- TOIGNORE=$(find . -type l -printf '-I %f\n' -o \
- ! -perm /4 -printf '-I %f\n')
- $RUNAS cvs -d $DIR/d99cvsroot import -m "nomesg" $TOIGNORE \
- d99reposname vtag rtag
-}
-run_test 99b "cvs import ======================================="
+ local toignore=$(find . -type l -printf '-I %f\n' -o \
+ ! -perm /4 -printf '-I %f\n')
+ $RUNAS cvs -d $DIR/$tdir.cvsroot import -m "nomesg" $toignore \
+ $tdir.reposname vtag rtag
-test_99c() {
- [ -z "$(which cvs 2>/dev/null)" ] && skip_env "could not find cvs" && return
- [ ! -d $DIR/d99cvsroot ] && test_99b
cd $DIR
- test_mkdir -p $DIR/d99reposname
- chown $RUNAS_ID $DIR/d99reposname
- $RUNAS cvs -d $DIR/d99cvsroot co d99reposname
-}
-run_test 99c "cvs checkout ====================================="
+ test_mkdir $DIR/$tdir.reposname
+ chown $RUNAS_ID $DIR/$tdir.reposname
+ $RUNAS cvs -d $DIR/$tdir.cvsroot co $tdir.reposname
-test_99d() {
- [ -z "$(which cvs 2>/dev/null)" ] && skip_env "could not find cvs" && return
- [ ! -d $DIR/d99cvsroot ] && test_99c
- cd $DIR/d99reposname
+ cd $DIR/$tdir.reposname
$RUNAS touch foo99
$RUNAS cvs add -m 'addmsg' foo99
-}
-run_test 99d "cvs add =========================================="
-
-test_99e() {
- [ -z "$(which cvs 2>/dev/null)" ] && skip_env "could not find cvs" && return
- [ ! -d $DIR/d99cvsroot ] && test_99c
- cd $DIR/d99reposname
$RUNAS cvs update
-}
-run_test 99e "cvs update ======================================="
-
-test_99f() {
- [ -z "$(which cvs 2>/dev/null)" ] && skip_env "could not find cvs" && return
- [ ! -d $DIR/d99cvsroot ] && test_99d
- cd $DIR/d99reposname
$RUNAS cvs commit -m 'nomsg' foo99
- rm -fr $DIR/d99cvsroot
+ rm -fr $DIR/$tdir.cvsroot
}
-run_test 99f "cvs commit ======================================="
+run_test 99 "cvs strange file/directory operations"
test_100() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_101a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- [ $MDSCOUNT -ge 2 ] && skip "skip now for >= 2 MDTs" && return #LU-4322
+ [ $MDSCOUNT -ge 2 ] && skip "needs < 2 MDTs" && return #LU-4322
local s
local discard
local nreads=10000
fi
rm -f $DIR/$tfile || true
}
-run_test 101a "check read-ahead for random reads ================"
+run_test 101a "check read-ahead for random reads"
setup_test101bc() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
local STRIPE_SIZE=$1
local FILE_LENGTH=$2
STRIPE_OFFSET=0
test_101b() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- [[ $OSTCOUNT -lt 2 ]] &&
- skip_env "skipping stride IO stride-ahead test" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
local STRIPE_SIZE=1048576
local STRIDE_SIZE=$((STRIPE_SIZE*OSTCOUNT))
if [ $SLOW == "yes" ]; then
$LFS setstripe -i 0 -c 1 $DIR/$tfile
local orig_mb=$(do_facet ost1 $LCTL get_param -n $brw_size | head -n 1)
- if [ $(lustre_version_code ost1) -ge $(version_code 2.8.52) ]; then
+ if [ $(lustre_version_code ost1) -ge $(version_code 2.8.52) -a \
+ $(lustre_version_code client) -ge $(version_code 2.8.52) ]; then
[ $(lustre_version_code ost1) -ge $(version_code 2.9.52) ] &&
suffix="M"
if [[ $orig_mb -lt 16 ]]; then
run_test 101g "Big bulk(4/16 MiB) readahead"
setup_test102() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
chown $RUNAS_ID $DIR/$tdir
STRIPE_SIZE=65536
STRIPE_OFFSET=1
done
cd $DIR
- $1 $TAR cf $TMP/f102.tar $tdir --xattrs
+ $1 tar cf $TMP/f102.tar $tdir --xattrs
}
cleanup_test102() {
# b10930: get/set/list trusted.lov xattr
echo "get/set/list trusted.lov xattr ..."
- [[ $OSTCOUNT -lt 2 ]] && skip_env "skipping 2-stripe test" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
local testfile=$DIR/$tfile
$SETSTRIPE -S 65536 -i 1 -c $OSTCOUNT $testfile ||
error "setstripe failed"
# b10930: get/set/list lustre.lov xattr
echo "get/set/list lustre.lov xattr ..."
- [[ $OSTCOUNT -lt 2 ]] && skip_env "skipping 2-stripe test" && return
- test_mkdir -p $DIR/$tdir
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
+ test_mkdir $DIR/$tdir
chown $RUNAS_ID $DIR/$tdir
local testfile=$DIR/$tdir/$tfile
$RUNAS $SETSTRIPE -S 65536 -i 1 -c $OSTCOUNT $testfile ||
return 0
}
-find_lustre_tar() {
- [ -n "$(which tar 2>/dev/null)" ] &&
- strings $(which tar) | grep -q "lustre" && echo tar
+have_xattrs_include() {
+ tar --help | grep -q xattrs-include &&
+ echo --xattrs-include="lustre.*"
}
test_102d() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- # b10930: tar test for trusted.lov xattr
- TAR=$(find_lustre_tar)
- [ -z "$TAR" ] && skip_env "lustre-aware tar is not installed" && return
- [[ $OSTCOUNT -lt 2 ]] && skip_env "skipping N-stripe test" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
+ XINC=$(have_xattrs_include)
setup_test102
- test_mkdir -p $DIR/d102d
- $TAR xf $TMP/f102.tar -C $DIR/d102d --xattrs
- cd $DIR/d102d/$tdir
+ tar xf $TMP/f102.tar -C $DIR/$tdir --xattrs $XINC
+ cd $DIR/$tdir/$tdir
compare_stripe_info1
}
-run_test 102d "tar restore stripe info from tarfile,not keep osts ==========="
+run_test 102d "tar restore stripe info from tarfile,not keep osts"
test_102f() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- # b10930: tar test for trusted.lov xattr
- TAR=$(find_lustre_tar)
- [ -z "$TAR" ] && skip_env "lustre-aware tar is not installed" && return
- [[ $OSTCOUNT -lt 2 ]] && skip_env "skipping N-stripe test" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
+ XINC=$(have_xattrs_include)
setup_test102
- test_mkdir -p $DIR/d102f
+ test_mkdir $DIR/$tdir.restore
cd $DIR
- $TAR cf - --xattrs $tdir | $TAR xf - --xattrs -C $DIR/d102f
- cd $DIR/d102f/$tdir
+ tar cf - --xattrs $tdir | tar xf - \
+ -C $DIR/$tdir.restore --xattrs $XINC
+ cd $DIR/$tdir.restore/$tdir
compare_stripe_info1
}
-run_test 102f "tar copy files, not keep osts ==========="
+run_test 102f "tar copy files, not keep osts"
grow_xattr() {
local xsize=${1:-1024} # in bytes
test_102j() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- TAR=$(find_lustre_tar)
- [ -z "$TAR" ] && skip_env "lustre-aware tar is not installed" && return
- [[ $OSTCOUNT -lt 2 ]] && skip_env "skipping N-stripe test" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
+ XINC=$(have_xattrs_include)
setup_test102 "$RUNAS"
- test_mkdir -p $DIR/d102j
- chown $RUNAS_ID $DIR/d102j
- $RUNAS $TAR xf $TMP/f102.tar -C $DIR/d102j --xattrs
- cd $DIR/d102j/$tdir
+ chown $RUNAS_ID $DIR/$tdir
+ $RUNAS tar xf $TMP/f102.tar -C $DIR/$tdir --xattrs $XINC
+ cd $DIR/$tdir/$tdir
compare_stripe_info1 "$RUNAS"
}
run_test 102j "non-root tar restore stripe info from tarfile, not keep osts ==="
test_102k() {
[ -z "$(which setfattr 2>/dev/null)" ] &&
skip "could not find setfattr" && return
- touch $DIR/$tfile
- # b22187 just check that does not crash for regular file.
- setfattr -n trusted.lov $DIR/$tfile
- # b22187 'setfattr -n trusted.lov' should work as remove LOV EA for directories
- local test_kdir=$DIR/d102k
- test_mkdir $test_kdir
- local default_size=`$GETSTRIPE -S $test_kdir`
- local default_count=`$GETSTRIPE -c $test_kdir`
- local default_offset=`$GETSTRIPE -i $test_kdir`
+ touch $DIR/$tfile
+ # b22187 just check that does not crash for regular file.
+ setfattr -n trusted.lov $DIR/$tfile
+ # b22187 'setfattr -n trusted.lov' should remove LOV EA for directories
+ local test_kdir=$DIR/$tdir
+ test_mkdir $test_kdir
+ local default_size=$($LFS getstripe -S $test_kdir)
+ local default_count=$($LFS getstripe -c $test_kdir)
+ local default_offset=$($LFS getstripe -i $test_kdir)
$SETSTRIPE -S 65536 -i 0 -c $OSTCOUNT $test_kdir ||
- error 'dir setstripe failed'
- setfattr -n trusted.lov $test_kdir
- local stripe_size=`$GETSTRIPE -S $test_kdir`
- local stripe_count=`$GETSTRIPE -c $test_kdir`
- local stripe_offset=`$GETSTRIPE -i $test_kdir`
- [ $stripe_size -eq $default_size ] ||
- error "stripe size $stripe_size != $default_size"
- [ $stripe_count -eq $default_count ] ||
- error "stripe count $stripe_count != $default_count"
- [ $stripe_offset -eq $default_offset ] ||
- error "stripe offset $stripe_offset != $default_offset"
- rm -rf $DIR/$tfile $test_kdir
+ error 'dir setstripe failed'
+ setfattr -n trusted.lov $test_kdir
+ local stripe_size=$($LFS getstripe -S $test_kdir)
+ local stripe_count=$($LFS getstripe -c $test_kdir)
+ local stripe_offset=$($LFS getstripe -i $test_kdir)
+ [ $stripe_size -eq $default_size ] ||
+ error "stripe size $stripe_size != $default_size"
+ [ $stripe_count -eq $default_count ] ||
+ error "stripe count $stripe_count != $default_count"
+ [ $stripe_offset -eq $default_offset ] ||
+ error "stripe offset $stripe_offset != $default_offset"
+ rm -rf $DIR/$tfile $test_kdir
}
run_test 102k "setfattr without parameter of value shouldn't cause a crash"
rmdir $DIR/$tdir || error "rmdir"
#striped directory
- test_mkdir -p $DIR/$tdir || error "make striped dir"
+ test_mkdir $DIR/$tdir
setfattr -n user.$(basename $tdir) $DIR/$tdir || error "setfattr dir"
getfattr -n user.$(basename $tdir) $DIR/$tdir || error "getfattr dir"
setfattr -x user.$(basename $tdir) $DIR/$tdir ||
}
run_test 103a "acl test ========================================="
-test_103b() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
- local noacl=false
- local MDT_DEV=$(mdsdevname ${SINGLEMDS//mds/})
- local mountopts=$MDS_MOUNT_OPTS
-
- if [[ "$MDS_MOUNT_OPTS" =~ "noacl" ]]; then
- noacl=true
- else
- # stop the MDT
- stop $SINGLEMDS || error "failed to stop MDT."
- # remount the MDT
- if [ -z "$MDS_MOUNT_OPTS" ]; then
- MDS_MOUNT_OPTS="-o noacl"
- else
- MDS_MOUNT_OPTS="${MDS_MOUNT_OPTS},noacl"
- fi
- start $SINGLEMDS $MDT_DEV $MDS_MOUNT_OPTS ||
- error "failed to start MDT."
- MDS_MOUNT_OPTS=$mountopts
- fi
-
- touch $DIR/$tfile
- setfacl -m u:bin:rw $DIR/$tfile && error "setfacl should fail"
-
- if ! $noacl; then
- # stop the MDT
- stop $SINGLEMDS || error "failed to stop MDT."
- # remount the MDT
- start $SINGLEMDS $MDT_DEV $MDS_MOUNT_OPTS ||
- error "failed to start MDT."
- fi
-
- true
-}
-run_test 103b "MDS mount option 'noacl'"
-
test_103c() {
mkdir -p $DIR/$tdir
cp -rp $DIR/$tdir $DIR/$tdir.bak
fi
rm -f $DIR/$tfile
}
-run_test 105c "lockf when mounted without -o flock test ========"
+run_test 105c "lockf when mounted without -o flock test"
test_105d() { # bug 15924
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
flock_is_enabled || { skip "mount w/o flock enabled" && return; }
#define OBD_FAIL_LDLM_CP_CB_WAIT 0x315
$LCTL set_param fail_loc=0x80000315
touch $DIR/$tfile
flocks_test 3 $DIR/$tfile
}
-run_test 105e "Two conflicting flocks from same process ======="
+run_test 105e "Two conflicting flocks from same process"
test_106() { #bug 10921
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
$DIR/$tdir && error "exec $DIR/$tdir succeeded"
chmod 777 $DIR/$tdir || error "chmod $DIR/$tdir failed"
}
run_test 107 "Coredump on SIG"
test_110() {
- test_mkdir -p $DIR/$tdir
- test_mkdir $DIR/$tdir/$(str_repeat 'a' 255) ||
- error "mkdir with 255 char failed"
- test_mkdir $DIR/$tdir/$(str_repeat 'b' 256) &&
+ test_mkdir $DIR/$tdir
+ test_mkdir $DIR/$tdir/$(str_repeat 'a' 255)
+ $LFS mkdir -c $MDSCOUNT $DIR/$tdir/$(str_repeat 'b' 256) &&
error "mkdir with 256 char should fail, but did not"
touch $DIR/$tdir/$(str_repeat 'x' 255) ||
error "create with 255 char failed"
local nfiles
local facets=$(get_facets OST)
- save_lustre_params client \
- "osc.*OST*.max_rpcs_in_flight" > $save_params
- save_lustre_params $facets \
- "ost.OSS.ost_io.threads_max" >> $save_params
+ save_lustre_params client "osc.*OST*.max_rpcs_in_flight" > $save_params
+ save_lustre_params $facets "ost.OSS.ost_io.threads_max" >> $save_params
# Set in_flight to $rpc_in_flight
$LCTL set_param osc.*OST*.max_rpcs_in_flight=$rpc_in_flight ||
error "Failed to set max_rpcs_in_flight to $rpc_in_flight"
nfiles=${rpc_in_flight}
# Set ost thread_max to $thread_max
- do_facet ost1 \
- "$LCTL set_param ost.OSS.ost_io.threads_max=$thread_max"
+ do_facet ost1 "$LCTL set_param ost.OSS.ost_io.threads_max=$thread_max"
# 5 Minutes should be sufficient for max number of OSS
# threads(thread_max) to be created.
# Start I/O.
local WTL=${WTL:-"$LUSTRE/tests/write_time_limit"}
- mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
for i in $(seq $nfiles); do
local file=$DIR/$tdir/${tfile}-$i
$LFS setstripe -c -1 -i 0 $file
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
- [[ $OSTCOUNT -lt 2 ]] && skip_env "$OSTCOUNT < 2 OSTs" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
echo -n "Free space priority "
do_facet $SINGLEMDS lctl get_param -n lo*.*-mdtlov.qos_prio_free |
#define OBD_FAIL_OST_BRW_WRITE_BULK 0x20e
set_nodes_failloc "$(osts_nodes)" 0x20e
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
for ((i=0;i<10;i++)); do
(dd if=/dev/zero of=$DIR/$tdir/$tfile-$i bs=1M count=10 || \
{
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
# LU-646
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
$MULTIOP $DIR/$tdir Dy || error "fsync dir failed"
rm -rf $DIR/$tdir
}
-run_test 118l "fsync dir ========="
+run_test 118l "fsync dir"
test_118m() # LU-3066
{
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
$MULTIOP $DIR/$tdir DY || error "fdatasync dir failed"
rm -rf $DIR/$tdir
}
test_119b() # bug 11737
{
- [ "$OSTCOUNT" -lt "2" ] && skip_env "skipping 2-stripe test" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
$SETSTRIPE -c 2 $DIR/$tfile || error "setstripe failed"
dd if=/dev/zero of=$DIR/$tfile bs=1M count=1 seek=1 || error "dd failed"
test_120a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
- test_mkdir -p $DIR/$tdir
- [ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
- skip "no early lock cancel on server" && return 0
+ test_mkdir $DIR/$tdir
+ $LCTL get_param -n mdc.*.connect_flags | grep -q early_lock_cancel ||
+ { skip "no early lock cancel on server"; return 0; }
lru_resize_disable mdc
lru_resize_disable osc
test_120b() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
- test_mkdir $DIR/$tdir
- [ -z "$(lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel)" ] && \
- skip "no early lock cancel on server" && return 0
- lru_resize_disable mdc
- lru_resize_disable osc
- cancel_lru_locks mdc
- stat $DIR/$tdir > /dev/null
+ test_mkdir $DIR/$tdir
+ $LCTL get_param -n mdc.*.connect_flags | grep -q early_lock_cancel ||
+ { skip "no early lock cancel on server"; return 0; }
+ lru_resize_disable mdc
+ lru_resize_disable osc
+ cancel_lru_locks mdc
+ stat $DIR/$tdir > /dev/null
can1=$(do_facet $SINGLEMDS \
"$LCTL get_param -n ldlm.services.ldlm_canceld.stats" |
awk '/ldlm_cancel/ {print $2}')
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
test_mkdir -c1 $DIR/$tdir
- [ -z "$(lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel)" ] && \
- skip "no early lock cancel on server" && return 0
- lru_resize_disable mdc
- lru_resize_disable osc
- test_mkdir -p -c1 $DIR/$tdir/d1
- test_mkdir -p -c1 $DIR/$tdir/d2
+ $LCTL get_param -n mdc.*.connect_flags | grep -q early_lock_cancel ||
+ { skip "no early lock cancel on server"; return 0; }
+ lru_resize_disable mdc
+ lru_resize_disable osc
+ test_mkdir -c1 $DIR/$tdir/d1
+ test_mkdir -c1 $DIR/$tdir/d2
touch $DIR/$tdir/d1/f1
cancel_lru_locks mdc
stat $DIR/$tdir/d1 $DIR/$tdir/d2 $DIR/$tdir/d1/f1 > /dev/null
test_120d() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
- test_mkdir -p -c1 $DIR/$tdir
- [ -z "$(lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel)" ] && \
- skip "no early lock cancel on server" && return 0
+ test_mkdir -c1 $DIR/$tdir
+ $LCTL get_param -n mdc.*.connect_flags | grep -q early_lock_cancel ||
+ { skip "no early lock cancel on server"; return 0; }
lru_resize_disable mdc
lru_resize_disable osc
touch $DIR/$tdir
test_120e() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- ! $($LCTL get_param -n mdc.*.connect_flags | grep -q early_lock_can) &&
- skip "no early lock cancel on server" && return 0
+ $LCTL get_param -n mdc.*.connect_flags | grep -q early_lock_cancel ||
+ { skip "no early lock cancel on server"; return 0; }
remote_mds_nodsh && skip "remote MDS with nodsh" && return
local dlmtrace_set=false
- test_mkdir -p -c1 $DIR/$tdir
+ test_mkdir -c1 $DIR/$tdir
lru_resize_disable mdc
lru_resize_disable osc
! $LCTL get_param debug | grep -q dlmtrace &&
test_120f() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- [ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
- skip "no early lock cancel on server" && return 0
+ $LCTL get_param -n mdc.*.connect_flags | grep -q early_lock_cancel ||
+ { skip "no early lock cancel on server"; return 0; }
remote_mds_nodsh && skip "remote MDS with nodsh" && return
- test_mkdir -p -c1 $DIR/$tdir
- lru_resize_disable mdc
- lru_resize_disable osc
- test_mkdir -p -c1 $DIR/$tdir/d1
- test_mkdir -p -c1 $DIR/$tdir/d2
+ test_mkdir -c1 $DIR/$tdir
+ lru_resize_disable mdc
+ lru_resize_disable osc
+ test_mkdir -c1 $DIR/$tdir/d1
+ test_mkdir -c1 $DIR/$tdir/d2
dd if=/dev/zero of=$DIR/$tdir/d1/f1 count=1
dd if=/dev/zero of=$DIR/$tdir/d2/f2 count=1
cancel_lru_locks mdc
test_120g() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- [ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
- skip "no early lock cancel on server" && return 0
+ $LCTL get_param -n mdc.*.connect_flags | grep -q early_lock_cancel ||
+ { skip "no early lock cancel on server"; return 0; }
remote_mds_nodsh && skip "remote MDS with nodsh" && return
- lru_resize_disable mdc
- lru_resize_disable osc
- count=10000
- echo create $count files
- test_mkdir -p $DIR/$tdir
- cancel_lru_locks mdc
- cancel_lru_locks osc
- t0=`date +%s`
+ lru_resize_disable mdc
+ lru_resize_disable osc
+ count=10000
+ echo create $count files
+ test_mkdir $DIR/$tdir
+ cancel_lru_locks mdc
+ cancel_lru_locks osc
+ t0=$(date +%s)
can0=$(do_facet $SINGLEMDS \
"$LCTL get_param -n ldlm.services.ldlm_canceld.stats" |
test_123a() { # was test 123, statahead(bug 11401)
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- SLOWOK=0
- if [ -z "$(grep "processor.*: 1" /proc/cpuinfo)" ]; then
- log "testing on UP system. Performance may be not as good as expected."
- SLOWOK=1
- fi
+ SLOWOK=0
+ if ! grep -q "processor.*: 1" /proc/cpuinfo; then
+ log "testing UP system. Performance may be lower than expected."
+ SLOWOK=1
+ fi
- rm -rf $DIR/$tdir
- test_mkdir -p $DIR/$tdir
+ rm -rf $DIR/$tdir
+ test_mkdir $DIR/$tdir
NUMFREE=$(df -i -P $DIR | tail -n 1 | awk '{ print $4 }')
[[ $NUMFREE -gt 100000 ]] && NUMFREE=100000 || NUMFREE=$((NUMFREE-1000))
MULT=10
test_123b () { # statahead(bug 15027)
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
createmany -o $DIR/$tdir/$tfile-%d 1000
cancel_lru_locks mdc
test_124a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- [ -z "$($LCTL get_param -n mdc.*.connect_flags | grep lru_resize)" ] &&
- skip "no lru resize on server" && return 0
- local NR=2000
- test_mkdir -p $DIR/$tdir || error "failed to create $DIR/$tdir"
+ $LCTL get_param -n mdc.*.connect_flags | grep -q lru_resize ||
+ { skip "no lru resize on server"; return 0; }
+ local NR=2000
+ test_mkdir $DIR/$tdir
- log "create $NR files at $DIR/$tdir"
- createmany -o $DIR/$tdir/f $NR ||
- error "failed to create $NR files in $DIR/$tdir"
+ log "create $NR files at $DIR/$tdir"
+ createmany -o $DIR/$tdir/f $NR ||
+ error "failed to create $NR files in $DIR/$tdir"
- cancel_lru_locks mdc
- ls -l $DIR/$tdir > /dev/null
+ cancel_lru_locks mdc
+ ls -l $DIR/$tdir > /dev/null
- local NSDIR=""
- local LRU_SIZE=0
+ local NSDIR=""
+ local LRU_SIZE=0
for VALUE in $($LCTL get_param ldlm.namespaces.*mdc-*.lru_size); do
local PARAM=$(echo ${VALUE[0]} | cut -d "=" -f1)
LRU_SIZE=$($LCTL get_param -n $PARAM)
test_124b() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- [ -z "$($LCTL get_param -n mdc.*.connect_flags | grep lru_resize)" ] &&
- skip "no lru resize on server" && return 0
+ $LCTL get_param -n mdc.*.connect_flags | grep -q lru_resize ||
+ { skip "no lru resize on server"; return 0; }
LIMIT=$(get_max_pool_limit)
fi
lru_resize_disable mdc
- test_mkdir -p $DIR/$tdir/disable_lru_resize ||
- error "failed to create $DIR/$tdir/disable_lru_resize"
+ test_mkdir -p $DIR/$tdir/disable_lru_resize
createmany -o $DIR/$tdir/disable_lru_resize/f $NR
log "doing ls -la $DIR/$tdir/disable_lru_resize 3 times"
log "lru_size = $(lctl get_param -n ldlm.namespaces.*mdc*.lru_size)"
unlinkmany $DIR/$tdir/disable_lru_resize/f $NR
- lru_resize_enable mdc
- test_mkdir -p $DIR/$tdir/enable_lru_resize ||
- error "failed to create $DIR/$tdir/enable_lru_resize"
+ lru_resize_enable mdc
+ test_mkdir -p $DIR/$tdir/enable_lru_resize
createmany -o $DIR/$tdir/enable_lru_resize/f $NR
log "doing ls -la $DIR/$tdir/enable_lru_resize 3 times"
test_124c() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- [ -z "$($LCTL get_param -n mdc.*.connect_flags | grep lru_resize)" ] &&
- skip "no lru resize on server" && return 0
+ $LCTL get_param -n mdc.*.connect_flags | grep -q lru_resize ||
+ { skip "no lru resize on server"; return 0; }
# cache ununsed locks on client
local nr=100
cancel_lru_locks mdc
- test_mkdir -p $DIR/$tdir || error "failed to create $DIR/$tdir"
+ test_mkdir $DIR/$tdir
createmany -o $DIR/$tdir/f $nr ||
error "failed to create $nr files in $DIR/$tdir"
ls -l $DIR/$tdir > /dev/null
echo "unused=$unused, max_age=$max_age, recalc_p=$recalc_p"
# set lru_max_age to 1 sec
- $LCTL set_param $nsdir.lru_max_age=1000 # jiffies
+ $LCTL set_param $nsdir.lru_max_age=1000 # milliseconds
echo "sleep $((recalc_p * 2)) seconds..."
sleep $((recalc_p * 2))
run_test 124c "LRUR cancel very aged locks"
test_125() { # 13358
- [ -z "$(lctl get_param -n llite.*.client_type | grep local)" ] && skip "must run as local client" && return
- [ -z "$(lctl get_param -n mdc.*-mdc-*.connect_flags | grep acl)" ] && skip "must have acl enabled" && return
+ $LCTL get_param -n llite.*.client_type | grep -q local ||
+ { skip "must run as local client"; return; }
+ $LCTL get_param -n mdc.*-mdc-*.connect_flags | grep -q acl ||
+ { skip "must have acl enabled"; return; }
[ -z "$(which setfacl)" ] && skip "must have setfacl tool" && return
- test_mkdir -p $DIR/d125 || error "mkdir failed"
- $SETSTRIPE -S 65536 -c -1 $DIR/d125 || error "setstripe failed"
- setfacl -R -m u:bin:rwx $DIR/d125 || error "setfacl $DIR/d125 failed"
- ls -ld $DIR/d125 || error "cannot access $DIR/d125"
+ test_mkdir $DIR/$tdir
+ $LFS setstripe -S 65536 -c -1 $DIR/$tdir || error "setstripe failed"
+ setfacl -R -m u:bin:rwx $DIR/$tdir || error "setfacl $DIR/$tdir failed"
+ ls -ld $DIR/$tdir || error "cannot access $DIR/$tdir"
}
run_test 125 "don't return EPROTO when a dir has a non-default striping and ACLs"
test_126() { # bug 12829/13455
- [ -z "$(lctl get_param -n llite.*.client_type | grep local)" ] && skip "must run as local client" && return
- [ "$UID" != 0 ] && skip_env "skipping $TESTNAME (must run as root)" && return
+ $LCTL get_param -n llite.*.client_type | grep -q local ||
+ { skip "must run as local client"; return; }
+ [ "$UID" != 0 ] && skip_env "$TESTNAME (must run as root)" && return
$GSS && skip "must run as gss disabled" && return
$RUNAS -u 0 -g 1 touch $DIR/$tfile || error "touch failed"
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
if [ "$(facet_fstype $SINGLEMDS)" != ldiskfs ]; then
- skip "Only applicable to ldiskfs-based MDTs"
+ skip "ldiskfs only test"
return
fi
remote_mds_nodsh && skip "remote MDS with nodsh" && return
run_test 130a "FIEMAP (1-stripe file)"
test_130b() {
- [ "$OSTCOUNT" -lt "2" ] &&
- skip_env "skipping FIEMAP on $OSTCOUNT-stripe file" && return
+ [ "$OSTCOUNT" -lt "2" ] && skip_env "needs >= 2 OSTs" && return
local filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
[ -n "$filefrag_op" ] && skip_env "filefrag does not support FIEMAP" &&
run_test 130b "FIEMAP ($OSTCOUNT-stripe file)"
test_130c() {
- [ "$OSTCOUNT" -lt "2" ] &&
- skip_env "skipping FIEMAP on 2-stripe file" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
[ -n "$filefrag_op" ] && skip "filefrag does not support FIEMAP" &&
run_test 130c "FIEMAP (2-stripe file with hole)"
test_130d() {
- [ "$OSTCOUNT" -lt "3" ] &&
- skip_env "skipping FIEMAP on N-stripe file test" && return
+ [[ $OSTCOUNT -lt 3 ]] && skip_env "needs >= 3 OSTs" && return
filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
[ -n "$filefrag_op" ] && skip "filefrag does not support FIEMAP" &&
[ "$(facet_fstype ost$(($($GETSTRIPE -i $fm_file) + 1)))" = "zfs" ] &&
skip "ORI-366/LU-1941: FIEMAP unimplemented on ZFS" && return
- local actual_stripecnt=$($GETSTRIPE -c $fm_file)
- dd if=/dev/zero of=$fm_file bs=1M count=$actual_stripecnt ||
+ local actual_stripe_count=$($GETSTRIPE -c $fm_file)
+ dd if=/dev/zero of=$fm_file bs=1M count=$actual_stripe_count ||
error "dd failed on $fm_file"
filefrag -ves $fm_file || error "filefrag $fm_file failed"
(( tot_len += ext_len ))
last_lun=$frag_lun
done
- if (( num_luns != actual_stripecnt || tot_len != 1024 )); then
+ if (( num_luns != actual_stripe_count || tot_len != 1024 )); then
cleanup_130
error "FIEMAP on $fm_file failed; returned wrong number of " \
"luns or wrong len for OST $last_lun"
run_test 130d "FIEMAP (N-stripe file)"
test_130e() {
- [ "$OSTCOUNT" -lt "2" ] &&
- skip_env "skipping continuation FIEMAP test" && return
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs" && return
filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
[ -n "$filefrag_op" ] && skip "filefrag does not support FIEMAP" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
- local testdir=$DIR/${tdir}/stats_testdir
- test_mkdir -p ${testdir} || error "mkdir failed"
+ local testdir=$DIR/$tdir/stats_testdir
+ test_mkdir -p $testdir
# verify obdfilter stats.
- $SETSTRIPE -c 1 -i 0 ${testdir}/${tfile}
+ $SETSTRIPE -c 1 -i 0 $testdir/$tfile
sync
cancel_lru_locks osc
wait_delete_completed
do_facet $SINGLEMDS $LCTL set_param mdt.*.md_stats=clear
do_facet ost1 $LCTL set_param obdfilter.*.stats=clear
- dd if=/dev/zero of=${testdir}/${tfile} conv=notrunc bs=512k count=1 || error "dd failed"
+ dd if=/dev/zero of=$testdir/$tfile conv=notrunc bs=512k count=1 ||
+ error "dd failed"
sync
cancel_lru_locks osc
check_stats ost1 "write" 1
- dd if=${testdir}/${tfile} of=/dev/null bs=1k count=1 || error "dd failed"
+ dd if=$testdir/$tfile of=/dev/null bs=1k count=1 || error "dd failed"
check_stats ost1 "read" 1
- > ${testdir}/${tfile} || error "truncate failed"
+ > $testdir/$tfile || error "truncate failed"
check_stats ost1 "punch" 1
- rm -f ${testdir}/${tfile} || error "file remove failed"
+ rm -f $testdir/$tfile || error "file remove failed"
wait_delete_completed
check_stats ost1 "destroy" 1
- rm -rf $DIR/${tdir}
+ rm -rf $DIR/$tdir
}
run_test 133c "Verifying OST stats ========================================"
test_140() { #bug-17379
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- test_mkdir -p $DIR/$tdir || error "Creating dir $DIR/$tdir"
+ test_mkdir $DIR/$tdir
cd $DIR/$tdir || error "Changing to $DIR/$tdir"
cp $(which stat) . || error "Copying stat to $DIR/$tdir"
# VFS limits max symlink depth to 5(4KSTACK) or 7(8KSTACK) or 8
# For kernel > 3.5, bellow only tests consecutive symlink (MAX 40)
local i=0
- while i=`expr $i + 1`; do
- test_mkdir -p $i || error "Creating dir $i"
- cd $i || error "Changing to $i"
- ln -s ../stat stat || error "Creating stat symlink"
- # Read the symlink until ELOOP present,
- # not LBUGing the system is considered success,
- # we didn't overrun the stack.
- $OPENFILE -f O_RDONLY stat >/dev/null 2>&1; ret=$?
- [ $ret -ne 0 ] && {
- if [ $ret -eq 40 ]; then
- break # -ELOOP
- else
- error "Open stat symlink"
- return
- fi
- }
- done
- i=`expr $i - 1`
- echo "The symlink depth = $i"
+ while i=$((i + 1)); do
+ test_mkdir $i
+ cd $i || error "Changing to $i"
+ ln -s ../stat stat || error "Creating stat symlink"
+ # Read the symlink until ELOOP present,
+ # not LBUGing the system is considered success,
+ # we didn't overrun the stack.
+ $OPENFILE -f O_RDONLY stat >/dev/null 2>&1; ret=$?
+ if [ $ret -ne 0 ]; then
+ if [ $ret -eq 40 ]; then
+ break # -ELOOP
+ else
+ error "Open stat symlink"
+ return
+ fi
+ fi
+ done
+ i=$((i - 1))
+ echo "The symlink depth = $i"
[ $i -eq 5 -o $i -eq 7 -o $i -eq 8 -o $i -eq 40 ] ||
error "Invalid symlink depth"
function roc_hit_init() {
local list=$(comma_list $(osts_nodes))
local dir=$DIR/$tdir-check
- local file=$dir/file
+ local file=$dir/$tfile
local BEFORE
local AFTER
local idx
- test_mkdir -p $dir
+ test_mkdir $dir
#use setstripe to do a write to every ost
for i in $(seq 0 $((OSTCOUNT-1))); do
$SETSTRIPE -c 1 -i $i $dir || error "$SETSTRIPE $file failed"
test_154g()
{
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.92) ]] ||
+ [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.92) && \
+ $(lustre_version_code client) -gt $(version_code 2.6.99) ]] ||
{ skip "Need MDS version at least 2.6.92"; return 0; }
[ -n "$FILESET" ] && skip "SKIP due to FILESET set" && return
test_161a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- test_mkdir -p -c1 $DIR/$tdir
+ test_mkdir -c1 $DIR/$tdir
cp /etc/hosts $DIR/$tdir/$tfile
test_mkdir -c1 $DIR/$tdir/foo1
test_mkdir -c1 $DIR/$tdir/foo2
run_test 180c "test huge bulk I/O size on obdfilter, don't LASSERT"
test_181() { # bug 22177
- test_mkdir -p $DIR/$tdir || error "creating dir $DIR/$tdir"
+ test_mkdir $DIR/$tdir
# create enough files to index the directory
createmany -o $DIR/$tdir/foobar 4000
# print attributes for debug purpose
check_swap_layouts_support && return 0
dir0=$DIR/$tdir/$testnum
- test_mkdir -p -c1 $dir0 || error "creating dir $dir0"
+ test_mkdir -p -c1 $dir0
ref1=/etc/passwd
ref2=/etc/group
file1=$dir0/f1
error "unknown getstripe attr '$1'"
esac
- [ $ACTUAL != $EXPECTED ] &&
+ [ $ACTUAL == $EXPECTED ] ||
error "$DIR/$tdir has $1 '$ACTUAL', not '$EXPECTED'"
}
test_204a() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
$SETSTRIPE --stripe-count 0 --stripe-size 0 --stripe-index -1 $DIR/$tdir
check_default_stripe_attr --stripe-count
check_default_stripe_attr --stripe-size
check_default_stripe_attr --stripe-index
-
- return 0
}
-run_test 204a "Print default stripe attributes ================="
+run_test 204a "Print default stripe attributes"
test_204b() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
$SETSTRIPE --stripe-count 1 $DIR/$tdir
check_default_stripe_attr --stripe-size
check_default_stripe_attr --stripe-index
-
- return 0
}
-run_test 204b "Print default stripe size and offset ==========="
+run_test 204b "Print default stripe size and offset"
test_204c() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
$SETSTRIPE --stripe-size 65536 $DIR/$tdir
check_default_stripe_attr --stripe-count
check_default_stripe_attr --stripe-index
-
- return 0
}
-run_test 204c "Print default stripe count and offset ==========="
+run_test 204c "Print default stripe count and offset"
test_204d() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
$SETSTRIPE --stripe-index 0 $DIR/$tdir
check_default_stripe_attr --stripe-count
check_default_stripe_attr --stripe-size
-
- return 0
}
-run_test 204d "Print default stripe count and size ============="
+run_test 204d "Print default stripe count and size"
test_204e() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
$SETSTRIPE -d $DIR/$tdir
check_default_stripe_attr --stripe-count --raw
check_default_stripe_attr --stripe-size --raw
check_default_stripe_attr --stripe-index --raw
-
- return 0
}
-run_test 204e "Print raw stripe attributes ================="
+run_test 204e "Print raw stripe attributes"
test_204f() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
$SETSTRIPE --stripe-count 1 $DIR/$tdir
check_default_stripe_attr --stripe-size --raw
check_default_stripe_attr --stripe-index --raw
-
- return 0
}
-run_test 204f "Print raw stripe size and offset ==========="
+run_test 204f "Print raw stripe size and offset"
test_204g() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
$SETSTRIPE --stripe-size 65536 $DIR/$tdir
check_default_stripe_attr --stripe-count --raw
check_default_stripe_attr --stripe-index --raw
-
- return 0
}
-run_test 204g "Print raw stripe count and offset ==========="
+run_test 204g "Print raw stripe count and offset"
test_204h() {
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
$SETSTRIPE --stripe-index 0 $DIR/$tdir
check_default_stripe_attr --stripe-count --raw
check_default_stripe_attr --stripe-size --raw
-
- return 0
}
-run_test 204h "Print raw stripe count and size ============="
+run_test 204h "Print raw stripe count and size"
# Figure out which job scheduler is being used, if any,
# or use a fake one
# having "abc" as 1st arg, creates $TMP/lnet_abc.out and $TMP/lnet_abc.sys
create_lnet_proc_files() {
- lctl get_param -n $1 >$TMP/lnet_$1.out || error "cannot read lnet.$1"
- sysctl lnet.$1 >$TMP/lnet_$1.sys_tmp || error "cannot read lnet.$1"
-
- sed "s/^lnet.$1\ =\ //g" "$TMP/lnet_$1.sys_tmp" >$TMP/lnet_$1.sys
- rm -f "$TMP/lnet_$1.sys_tmp"
+ lctl get_param -n $1 >$TMP/lnet_$1.sys || error "cannot read lnet.$1"
}
# counterpart of create_lnet_proc_files
remove_lnet_proc_files() {
- rm -f $TMP/lnet_$1.out $TMP/lnet_$1.sys
+ rm -f $TMP/lnet_$1.sys
}
# uses 1st arg as trailing part of filename, 2nd arg as description for reports,
# can we successfully write to lnet.stats?
lctl set_param -n stats=0 || error "cannot write to lnet.stats"
- sysctl -w lnet.stats=0 || error "cannot write to lnet.stats"
}
run_test 215 "lnet exists and has proper content - bugs 18102, 21079, 21517"
test_222a () {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- rm -rf $DIR/$tdir
- test_mkdir -p $DIR/$tdir
- $SETSTRIPE -c 1 -i 0 $DIR/$tdir
- createmany -o $DIR/$tdir/$tfile 10
- cancel_lru_locks mdc
- cancel_lru_locks osc
- #define OBD_FAIL_LDLM_AGL_DELAY 0x31a
- $LCTL set_param fail_loc=0x31a
- ls -l $DIR/$tdir > /dev/null || error "AGL for ls failed"
- $LCTL set_param fail_loc=0
- rm -r $DIR/$tdir
-}
-run_test 222a "AGL for ls should not trigger CLIO lock failure ================"
+ rm -rf $DIR/$tdir
+ test_mkdir $DIR/$tdir
+ $LFS setstripe -c 1 -i 0 $DIR/$tdir
+ createmany -o $DIR/$tdir/$tfile 10
+ cancel_lru_locks mdc
+ cancel_lru_locks osc
+ #define OBD_FAIL_LDLM_AGL_DELAY 0x31a
+ $LCTL set_param fail_loc=0x31a
+ ls -l $DIR/$tdir > /dev/null || error "AGL for ls failed"
+ $LCTL set_param fail_loc=0
+ rm -r $DIR/$tdir
+}
+run_test 222a "AGL for ls should not trigger CLIO lock failure"
test_222b () {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
rm -rf $DIR/$tdir
- test_mkdir -p $DIR/$tdir
- $SETSTRIPE -c 1 -i 0 $DIR/$tdir
+ test_mkdir $DIR/$tdir
+ $LFS setstripe -c 1 -i 0 $DIR/$tdir
createmany -o $DIR/$tdir/$tfile 10
cancel_lru_locks mdc
cancel_lru_locks osc
rm -r $DIR/$tdir || error "AGL for rmdir failed"
$LCTL set_param fail_loc=0
}
-run_test 222b "AGL for rmdir should not trigger CLIO lock failure ============="
+run_test 222b "AGL for rmdir should not trigger CLIO lock failure"
test_223 () {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- rm -rf $DIR/$tdir
- test_mkdir -p $DIR/$tdir
- $SETSTRIPE -c 1 -i 0 $DIR/$tdir
- createmany -o $DIR/$tdir/$tfile 10
- cancel_lru_locks mdc
- cancel_lru_locks osc
- #define OBD_FAIL_LDLM_AGL_NOLOCK 0x31b
- $LCTL set_param fail_loc=0x31b
- ls -l $DIR/$tdir > /dev/null || error "reenqueue failed"
- $LCTL set_param fail_loc=0
- rm -r $DIR/$tdir
+ rm -rf $DIR/$tdir
+ test_mkdir $DIR/$tdir
+ $LFS setstripe -c 1 -i 0 $DIR/$tdir
+ createmany -o $DIR/$tdir/$tfile 10
+ cancel_lru_locks mdc
+ cancel_lru_locks osc
+ #define OBD_FAIL_LDLM_AGL_NOLOCK 0x31b
+ $LCTL set_param fail_loc=0x31b
+ ls -l $DIR/$tdir > /dev/null || error "reenqueue failed"
+ $LCTL set_param fail_loc=0
+ rm -r $DIR/$tdir
}
run_test 223 "osc reenqueue if without AGL lock granted ======================="
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
[ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
- skip "non-ldiskfs backend" && return
+ skip "ldiskfs only test" && return
local MDT_DEV=$(mdsdevname ${SINGLEMDS//mds/})
local myDIR=$DIR/$tdir
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
[ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
- skip "non-ldiskfs backend" && return
+ skip "ldiskfs only test" && return
local MDT_DEV=$(mdsdevname ${SINGLEMDS//mds/})
local myDIR=$DIR/$tdir
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
[ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
- skip "non-ldiskfs backend" && return
+ skip "ldiskfs only test" && return
local MDT_DEV=$(mdsdevname ${SINGLEMDS//mds/})
local myDIR=$DIR/$tdir
#LU-2935
test_236() {
check_swap_layouts_support && return 0
- test_mkdir -p -c1 $DIR/$tdir || error "mkdir $tdir failed"
+ test_mkdir -c1 $DIR/$tdir
local ref1=/etc/passwd
local ref2=/etc/group
test_243()
{
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
group_lock_test -d $DIR/$tdir || error "A group lock test failed"
}
run_test 243 "various group lock tests"
test_244()
{
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
dd if=/dev/zero of=$DIR/$tdir/$tfile bs=1M count=35
sendfile_grouplock $DIR/$tdir/$tfile || \
error "sendfile+grouplock failed"
remote_ost_nodsh && skip "remote OST with nodsh" && return
if [ "$(facet_fstype ost1)" != "ldiskfs" -o \
"$(facet_fstype mds1)" != "ldiskfs" ]; then
- skip "can only run lr_reader on ldiskfs target"
+ skip "ldiskfs only test"
return
fi
}
run_test 255b "check 'lfs ladvise -a dontneed'"
+test_255c() {
+ local count
+ local new_count
+ local difference
+ local i
+ local rc
+ test_mkdir -p $DIR/$tdir
+ $SETSTRIPE -i 0 $DIR/$tdir
+
+ #test 10 returns only success/failure
+ i=10
+ lockahead_test -d $DIR/$tdir -t $i
+ rc=$?
+ if [ $rc -eq 255 ]; then
+ error "Ladvise test${i} failed, ${rc}"
+ fi
+
+ #test 11 counts lock enqueue requests, all others count new locks
+ i=11
+ count=$(do_facet ost1 \
+ $LCTL get_param -n ost.OSS.ost.stats)
+ count=$(echo "$count" | grep ldlm_extent_enqueue | awk '{ print $2 }')
+
+ lockahead_test -d $DIR/$tdir -t $i
+ rc=$?
+ if [ $rc -eq 255 ]; then
+ error "Ladvise test${i} failed, ${rc}"
+ fi
+
+ new_count=$(do_facet ost1 \
+ $LCTL get_param -n ost.OSS.ost.stats)
+ new_count=$(echo "$new_count" | grep ldlm_extent_enqueue | \
+ awk '{ print $2 }')
+
+ difference="$((new_count - count))"
+ if [ $difference -ne $rc ]; then
+ error "Ladvise test${i}, bad enqueue count, returned " \
+ "${rc}, actual ${difference}"
+ fi
+
+ for i in $(seq 12 21); do
+ # If we do not do this, we run the risk of having too many
+ # locks and starting lock cancellation while we are checking
+ # lock counts.
+ cancel_lru_locks osc
+
+ count=$($LCTL get_param -n \
+ ldlm.namespaces.$FSNAME-OST0000*osc-f*.lock_unused_count)
+
+ lockahead_test -d $DIR/$tdir -t $i
+ rc=$?
+ if [ $rc -eq 255 ]; then
+ error "Ladvise test ${i} failed, ${rc}"
+ fi
+
+ new_count=$($LCTL get_param -n \
+ ldlm.namespaces.$FSNAME-OST0000*osc-f*.lock_unused_count)
+ difference="$((new_count - count))"
+
+ # Test 15 output is divided by 1000 to map down to valid return
+ if [ $i -eq 15 ]; then
+ rc="$((rc * 1000))"
+ fi
+
+ if [ $difference -ne $rc ]; then
+ error "Ladvise test ${i}, bad lock count, returned " \
+ "${rc}, actual ${difference}"
+ fi
+ done
+
+ #test 22 returns only success/failure
+ i=22
+ lockahead_test -d $DIR/$tdir -t $i
+ rc=$?
+ if [ $rc -eq 255 ]; then
+ error "Ladvise test${i} failed, ${rc}"
+ fi
+
+}
+run_test 255c "suite of ladvise lockahead tests"
+
test_256() {
local cl_user
local cat_sl
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
[ "$(facet_fstype mds1)" != "ldiskfs" ] &&
- skip "non-ldiskfs backend" && return
+ skip "ldiskfs only test" && return
mdt_dev=$(mdsdevname 1)
echo $mdt_dev
#after mount new plainllog is used
touch $DIR/$tdir/{11..19}
- local TEMP256FILE=$(mktemp TEMP256XXXXXX)
+ do_facet mds1 sync
+ local TEMP256FILE=$(mktemp -u TEMP256XXXXXX)
cat_sl=$(do_facet mds1 \
"$DEBUGFS -R \\\"dump changelog_catalog $TEMP256FILE\\\" $mdt_dev; \
llog_reader $TEMP256FILE | grep \\\"type=1064553b\\\" | wc -l")
- rm $TEMP256FILE
+ do_facet mds1 rm $TEMP256FILE
if (( cat_sl != 2 )); then
do_facet mds1 $LCTL --device $MDT0 changelog_deregister $cl_user
$LFS changelog_clear $MDT0 $cl_user 0
- TEMP256FILE=$(mktemp TEMP256XXXXXX)
+ do_facet mds1 sync
+ TEMP256FILE=$(mktemp -u TEMP256XXXXXX)
cat_sl=$(do_facet mds1 \
"$DEBUGFS -R \\\"dump changelog_catalog $TEMP256FILE\\\" $mdt_dev; \
llog_reader $TEMP256FILE | grep \\\"type=1064553b\\\" | wc -l")
- rm $TEMP256FILE
+ do_facet mds1 rm $TEMP256FILE
do_facet mds1 $LCTL --device $MDT0 changelog_deregister $cl_user
[[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.55) ]] &&
skip "Need MDS version at least 2.8.55" && return
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
setfattr -n trusted.name1 -v value1 $DIR/$tdir ||
error "setfattr -n trusted.name1=value1 $DIR/$tdir failed"
local mtime2
local mtime3
- test_mkdir $DIR/$tdir || error "mkdir fail"
+ test_mkdir $DIR/$tdir
$LFS setdirstripe -i 0 -c 2 -t all_char $DIR/$tdir/striped_dir ||
error "set striped dir error"
for ((i=0; i<10; i++)); do
$LFS setdirstripe -D -i1 $DIR/$tdir/striped_dir ||
error "create striped_dir failed"
+ $LFS setdirstripe -i0 $DIR/$tdir/striped_dir/dir0 ||
+ error "create dir0 fails"
+ stripe_index=$($LFS getdirstripe -i $DIR/$tdir/striped_dir/dir0)
+ [ $stripe_index -eq 0 ] ||
+ error "dir0 expect index 0 got $stripe_index"
+
mkdir $DIR/$tdir/striped_dir/dir1 ||
error "create dir1 fails"
stripe_index=$($LFS getdirstripe -i $DIR/$tdir/striped_dir/dir1)
[ $stripe_index -eq 1 ] ||
- error "dir1 expect 1 got $stripe_index"
-
- $LFS setdirstripe -i2 $DIR/$tdir/striped_dir/dir2 ||
- error "create dir2 fails"
- stripe_index=$($LFS getdirstripe -i $DIR/$tdir/striped_dir/dir2)
- [ $stripe_index -eq 2 ] ||
- error "dir2 expect 2 got $stripe_index"
+ error "dir1 expect index 1 got $stripe_index"
#check default stripe count/stripe index
test_300_check_default_striped_dir normal_dir $MDSCOUNT 1
remote_ost_nodsh && skip "remote OST with nodsh" && return
if [ "$(facet_fstype ost1)" != "ldiskfs" ]; then
- skip "only for ldiskfs" && return 0
+ skip "ldiskfs only test" && return 0
fi
test_fake_rw read
}
if ! [[ -d $prefix ]]; then
# Assume we're running in tree and fixup the include path.
- extra_flags+=" -I$LUSTRE/../libcfs/include"
extra_flags+=" -I$LUSTRE/include"
extra_flags+=" -L$LUSTRE/utils"
fi
test_400b() { # LU-1606, LU-5011
local header
local out=$TMP/$tfile
- local prefix=/usr/include/lustre
+ local prefix=/usr/include/linux/lustre
# We use a hard coded prefix so that this test will not fail
# when run in tree. There are headers in lustre/include/lustre/
continue
fi
- if [[ "$(basename $header)" == liblustreapi.h ]]; then
- continue # liblustreapi.h is deprecated.
+ if [[ "$(basename $header)" == lustre_ioctl.h ]]; then
+ continue # lustre_ioctl.h is internal header
fi
$CC -Wall -Werror -include $header -c -x c /dev/null -o $out ||
run_test 404 "validate manual {de}activated works properly for OSPs"
test_405() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.6.92) ] &&
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.6.92) -o \
+ [ $(lustre_version_code client) -lt $(version_code 2.6.99) ] &&
skip "Layout swap lock is not supported" && return
check_swap_layouts_support && return 0
- test_mkdir -p $DIR/$tdir
+ test_mkdir $DIR/$tdir
swap_lock_test -d $DIR/$tdir ||
error "One layout swap locked test failed"
}
[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.50) ] &&
skip "Need MDS version at least 2.8.50" && return
- local def_stripenr=$($GETSTRIPE -c $MOUNT)
+ local def_stripe_count=$($GETSTRIPE -c $MOUNT)
local def_stripe_size=$($GETSTRIPE -S $MOUNT)
local def_stripe_offset=$($GETSTRIPE -i $MOUNT)
local def_pool=$($GETSTRIPE -p $MOUNT)
# restore FS default striping
if [ -z $def_pool ]; then
- $SETSTRIPE -c $def_stripenr -S $def_stripe_size \
+ $SETSTRIPE -c $def_stripe_count -S $def_stripe_size \
-i $def_stripe_offset $MOUNT ||
error "restore default striping failed"
else
- $SETSTRIPE -c $def_stripenr -S $def_stripe_size -p $def_pool \
- -i $def_stripe_offset $MOUNT ||
+ $SETSTRIPE -c $def_stripe_count -S $def_stripe_size \
+ -i $def_stripe_offset -p $def_pool $MOUNT ||
error "restore default striping with $def_pool failed"
fi
test_410()
{
+ [[ $(lustre_version_code client) -lt $(version_code 2.9.59) ]] &&
+ skip "Need client version at least 2.9.59" && return
+
# Create a file, and stat it from the kernel
local testfile=$DIR/$tfile
touch $testfile
}
run_test 410 "Test inode number returned from kernel thread"
+cleanup_test411_cgroup() {
+ trap 0
+ rmdir "$1"
+}
+
+test_411() {
+ local cg_basedir=/sys/fs/cgroup/memory
+ # LU-9966
+ test -f "$cg_basedir/memory.kmem.limit_in_bytes" ||
+ { skip "no setup for cgroup"; return; }
+
+ dd if=/dev/zero of=$DIR/$tfile bs=1M count=100 conv=fsync ||
+ error "test file creation failed"
+ cancel_lru_locks osc
+
+ # Create a very small memory cgroup to force a slab allocation error
+ local cgdir=$cg_basedir/osc_slab_alloc
+ mkdir $cgdir || error "cgroup mkdir '$cgdir' failed"
+ trap "cleanup_test411_cgroup $cgdir" EXIT
+ echo 2M > $cgdir/memory.kmem.limit_in_bytes
+ echo 1M > $cgdir/memory.limit_in_bytes
+
+ # Should not LBUG, just be killed by oom-killer
+ sh -c "echo \$$ > $cgdir/tasks && dd if=$DIR/$tfile of=/dev/null" &&
+ error "fail to trigger a memory allocation error"
+
+ cleanup_test411_cgroup $cgdir
+
+ return 0
+}
+run_test 411 "Slab allocation error with cgroup does not LBUG"
+
prep_801() {
[[ $(lustre_version_code mds1) -lt $(version_code 2.9.55) ]] ||
[[ $(lustre_version_code ost1) -lt $(version_code 2.9.55) ]] &&
stop_full_debug_logging
}
+barrier_stat() {
+ if [ $(lustre_version_code mgs) -le $(version_code 2.10.0) ]; then
+ local st=$(do_facet mgs $LCTL barrier_stat $FSNAME |
+ awk '/The barrier for/ { print $7 }')
+ echo $st
+ else
+ local st=$(do_facet mgs $LCTL barrier_stat -s $FSNAME)
+ echo \'$st\'
+ fi
+}
+
+barrier_expired() {
+ local expired
+
+ if [ $(lustre_version_code mgs) -le $(version_code 2.10.0) ]; then
+ expired=$(do_facet mgs $LCTL barrier_stat $FSNAME |
+ awk '/will be expired/ { print $7 }')
+ else
+ expired=$(do_facet mgs $LCTL barrier_stat -t $FSNAME)
+ fi
+
+ echo $expired
+}
+
test_801a() {
prep_801
do_facet mgs $LCTL barrier_freeze $FSNAME 10 &
sleep 2
- local b_status=$(do_facet mgs $LCTL barrier_stat $FSNAME |
- awk '/The barrier for/ { print $7 }')
+ local b_status=$(barrier_stat)
echo "Got barrier status at: $(date)"
[ "$b_status" = "'freezing_p1'" ] ||
error "(1) unexpected barrier status $b_status"
do_facet mgs $LCTL set_param fail_val=0 fail_loc=0
wait
- b_status=$(do_facet mgs $LCTL barrier_stat $FSNAME |
- awk '/The barrier for/ { print $7 }')
+ b_status=$(barrier_stat)
[ "$b_status" = "'frozen'" ] ||
error "(2) unexpected barrier status $b_status"
- local expired=$(do_facet mgs $LCTL barrier_stat $FSNAME |
- awk '/will be expired/ { print $7 }')
+ local expired=$(barrier_expired)
echo "sleep $((expired + 3)) seconds, then the barrier will be expired"
sleep $((expired + 3))
- b_status=$(do_facet mgs $LCTL barrier_stat $FSNAME |
- awk '/The barrier for/ { print $7 }')
+ b_status=$(barrier_stat)
[ "$b_status" = "'expired'" ] ||
error "(3) unexpected barrier status $b_status"
do_facet mgs $LCTL barrier_freeze $FSNAME 10 ||
error "(4) fail to freeze barrier"
- b_status=$(do_facet mgs $LCTL barrier_stat $FSNAME |
- awk '/The barrier for/ { print $7 }')
+ b_status=$(barrier_stat)
[ "$b_status" = "'frozen'" ] ||
error "(5) unexpected barrier status $b_status"
do_facet mgs $LCTL barrier_thaw $FSNAME &
sleep 2
- b_status=$(do_facet mgs $LCTL barrier_stat $FSNAME |
- awk '/The barrier for/ { print $7 }')
+ b_status=$(barrier_stat)
echo "Got barrier status at: $(date)"
[ "$b_status" = "'thawing'" ] ||
error "(6) unexpected barrier status $b_status"
do_facet mgs $LCTL set_param fail_val=0 fail_loc=0
wait
- b_status=$(do_facet mgs $LCTL barrier_stat $FSNAME |
- awk '/The barrier for/ { print $7 }')
+ b_status=$(barrier_stat)
[ "$b_status" = "'thawed'" ] ||
error "(7) unexpected barrier status $b_status"
do_facet $SINGLEMDS $LCTL set_param fail_loc=0x2203
do_facet mgs $LCTL barrier_freeze $FSNAME
- b_status=$(do_facet mgs $LCTL barrier_stat $FSNAME |
- awk '/The barrier for/ { print $7 }')
+ b_status=$(barrier_stat)
[ "$b_status" = "'failed'" ] ||
error "(8) unexpected barrier status $b_status"
# 180 seconds should be long enough
do_facet mgs $LCTL barrier_freeze $FSNAME 180
- local b_status=$(do_facet mgs $LCTL barrier_stat $FSNAME |
- awk '/The barrier for/ { print $7 }')
+ local b_status=$(barrier_stat)
[ "$b_status" = "'frozen'" ] ||
error "(6) unexpected barrier status $b_status"
stat $DIR/$tdir/d5 || error "(7) stat should succeed"
# To guarantee taht the 'stat' is not blocked
- b_status=$(do_facet mgs $LCTL barrier_stat $FSNAME |
- awk '/The barrier for/ { print $7 }')
+ b_status=$(barrier_stat)
[ "$b_status" = "'frozen'" ] ||
error "(8) unexpected barrier status $b_status"
ps -p $mv_pid || error "(12) rename should be blocked"
ps -p $rm_pid || error "(13) unlink should be blocked"
- b_status=$(do_facet mgs $LCTL barrier_stat $FSNAME |
- awk '/The barrier for/ { print $7 }')
+ b_status=$(barrier_stat)
[ "$b_status" = "'frozen'" ] ||
error "(14) unexpected barrier status $b_status"
do_facet mgs $LCTL barrier_thaw $FSNAME
- b_status=$(do_facet mgs $LCTL barrier_stat $FSNAME |
- awk '/The barrier for/ { print $7 }')
+ b_status=$(barrier_stat)
[ "$b_status" = "'thawed'" ] ||
error "(15) unexpected barrier status $b_status"
do_facet mgs $LCTL barrier_freeze $FSNAME 30
- local b_status=$(do_facet mgs $LCTL barrier_stat $FSNAME |
- awk '/The barrier for/ { print $7 }')
+ local b_status=$(barrier_stat)
[ "$b_status" = "'expired'" -o "$b_status" = "'failed'" ] || {
do_facet mgs $LCTL barrier_thaw $FSNAME
error "(2) unexpected barrier status $b_status"
do_facet mgs $LCTL barrier_freeze $FSNAME 10
- b_status=$(do_facet mgs $LCTL barrier_stat $FSNAME |
- awk '/The barrier for/ { print $7 }')
+ b_status=$(barrier_stat)
[ "$b_status" = "'frozen'" ] ||
error "(4) unexpected barrier status $b_status"
do_facet mgs $LCTL barrier_thaw $FSNAME
- b_status=$(do_facet mgs $LCTL barrier_stat $FSNAME |
- awk '/The barrier for/ { print $7 }')
+ b_status=$(barrier_stat)
[ "$b_status" = "'thawed'" ] ||
error "(5) unexpected barrier status $b_status"
git://git.whamcloud.com / fs / lustre-release.git / blobdiff