ALWAYS_EXCEPT+=" 411"
fi
-# 5 12 8 12 (min)"
-[ "$SLOW" = "no" ] && EXCEPT_SLOW="27m 60i 64b 68 71 115 135 136 300o"
+# 5 12 8 12 15 (min)"
+[ "$SLOW" = "no" ] && EXCEPT_SLOW="27m 60i 64b 68 71 115 135 136 230d 300o"
if [ "$mds1_FSTYPE" = "zfs" ]; then
# bug number for skipped test:
test_51d() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[[ $OSTCOUNT -lt 3 ]] && skip_env "needs >= 3 OSTs"
+ local qos_old
test_mkdir $DIR/$tdir
+ $LFS setstripe -c $OSTCOUNT $DIR/$tdir
+
+ qos_old=$(do_facet mds1 \
+ "$LCTL get_param -n lod.$FSNAME-*.qos_threshold_rr" | head -n 1)
+ do_nodes $(comma_list $(mdts_nodes)) \
+ "$LCTL set_param lod.$FSNAME-*.qos_threshold_rr=100"
+ stack_trap "do_nodes $(comma_list $(mdts_nodes)) \
+ '$LCTL set_param lod.$FSNAME-*.qos_threshold_rr=${qos_old%%%}'"
+
createmany -o $DIR/$tdir/t- 1000
$LFS getstripe $DIR/$tdir > $TMP/$tfile
- for N in $(seq 0 $((OSTCOUNT - 1))); do
- OBJS[$N]=$(awk -vobjs=0 '($1 == '$N') { objs += 1 } \
- END { printf("%0.0f", objs) }' $TMP/$tfile)
- OBJS0[$N]=$(grep -A 1 idx $TMP/$tfile | awk -vobjs=0 \
- '($1 == '$N') { objs += 1 } \
- END { printf("%0.0f", objs) }')
- log "OST$N has ${OBJS[$N]} objects, ${OBJS0[$N]} are index 0"
+ for ((n = 0; n < $OSTCOUNT; n++)); do
+ objs[$n]=$(awk -vobjs=0 '($1 == '$n') { objs += 1 } \
+ END { printf("%0.0f", objs) }' $TMP/$tfile)
+ objs0[$n]=$(grep -A 1 idx $TMP/$tfile | awk -vobjs=0 \
+ '($1 == '$n') { objs += 1 } \
+ END { printf("%0.0f", objs) }')
+ log "OST$n has ${objs[$n]} objects, ${objs0[$n]} are index 0"
done
unlinkmany $DIR/$tdir/t- 1000
- NLAST=0
- for N in $(seq 1 $((OSTCOUNT - 1))); do
- [[ ${OBJS[$N]} -lt $((${OBJS[$NLAST]} - 20)) ]] &&
- error "OST $N has less objects vs OST $NLAST" \
- " (${OBJS[$N]} < ${OBJS[$NLAST]}"
- [[ ${OBJS[$N]} -gt $((${OBJS[$NLAST]} + 20)) ]] &&
- error "OST $N has less objects vs OST $NLAST" \
- " (${OBJS[$N]} < ${OBJS[$NLAST]}"
-
- [[ ${OBJS0[$N]} -lt $((${OBJS0[$NLAST]} - 20)) ]] &&
- error "OST $N has less #0 objects vs OST $NLAST" \
- " (${OBJS0[$N]} < ${OBJS0[$NLAST]}"
- [[ ${OBJS0[$N]} -gt $((${OBJS0[$NLAST]} + 20)) ]] &&
- error "OST $N has less #0 objects vs OST $NLAST" \
- " (${OBJS0[$N]} < ${OBJS0[$NLAST]}"
- NLAST=$N
+ nlast=0
+ for ((n = 0; n < $OSTCOUNT; n++)); do
+ (( ${objs[$n]} > ${objs[$nlast]} * 4 / 5 )) ||
+ { $LFS df && $LFS df -i &&
+ error "OST $n has fewer objects vs. OST $nlast" \
+ " (${objs[$n]} < ${objs[$nlast]}"; }
+ (( ${objs[$n]} < ${objs[$nlast]} * 5 / 4 )) ||
+ { $LFS df && $LFS df -i &&
+ error "OST $n has fewer objects vs. OST $nlast" \
+ " (${objs[$n]} < ${objs[$nlast]}"; }
+
+ (( ${objs0[$n]} > ${objs0[$nlast]} * 4 / 5 )) ||
+ { $LFS df && $LFS df -i &&
+ error "OST $n has fewer #0 objects vs. OST $nlast" \
+ " (${objs0[$n]} < ${objs0[$nlast]}"; }
+ (( ${objs0[$n]} < ${objs0[$nlast]} * 5 / 4 )) ||
+ { $LFS df && $LFS df -i &&
+ error "OST $n has fewer #0 objects vs. OST $nlast" \
+ " (${objs0[$n]} < ${objs0[$nlast]}"; }
+ nlast=$n
done
- rm -f $TMP/$tfile
}
run_test 51d "check object distribution"
}
run_test 56d "'lfs df -v' prints only configured devices"
+test_56e() {
+ err_enoent=2 # No such file or directory
+ err_eopnotsupp=95 # Operation not supported
+
+ enoent_mnt=/pmt1 # Invalid dentry. Path not present
+ notsup_mnt=/tmp # Valid dentry, but Not a lustreFS
+
+ # Check for handling of path not exists
+ output=$($LFS df $enoent_mnt 2>&1)
+ ret=$?
+
+ fs=$(echo $output | awk -F: '{print $2}' | awk '{print $3}' | tr -d \')
+ [[ $fs = $enoent_mnt && $ret -eq $err_enoent ]] ||
+ error "expect failure $err_enoent, not $ret"
+
+ # Check for handling of non-Lustre FS
+ output=$($LFS df $notsup_mnt)
+ ret=$?
+
+ fs=$(echo $output | awk '{print $1}' | awk -F: '{print $2}')
+ [[ $fs = $notsup_mnt && $ret -eq $err_eopnotsupp ]] ||
+ error "expect success $err_eopnotsupp, not $ret"
+
+ # Check for multiple LustreFS argument
+ output=$($LFS df $MOUNT $MOUNT $MOUNT | grep -c "filesystem_summary:")
+ ret=$?
+
+ [[ $output -eq 3 && $ret -eq 0 ]] ||
+ error "expect success 3, not $output, rc = $ret"
+
+ # Check for correct non-Lustre FS handling among multiple
+ # LustreFS argument
+ output=$($LFS df $MOUNT $notsup_mnt $MOUNT |
+ grep -c "filesystem_summary:"; exit ${PIPESTATUS[0]})
+ ret=$?
+
+ [[ $output -eq 2 && $ret -eq $err_eopnotsupp ]] ||
+ error "expect success 2, not $output, rc = $ret"
+}
+run_test 56e "'lfs df' Handle non LustreFS & multiple LustreFS"
+
NUMFILES=3
NUMDIRS=3
setup_56() {
}
run_test 56xf "FID is not lost during migration of a composite layout file"
+check_file_ost_range() {
+ local file="$1"
+ shift
+ local range="$*"
+ local -a file_range
+ local idx
+
+ file_range=($($LFS getstripe -y "$file" |
+ awk '/l_ost_idx:/ { print $NF }'))
+
+ if [[ "${#file_range[@]}" = 0 ]]; then
+ echo "No osts found for $file"
+ return 1
+ fi
+
+ for idx in "${file_range[@]}"; do
+ [[ " $range " =~ " $idx " ]] ||
+ return 1
+ done
+
+ return 0
+}
+
+sub_test_56xg() {
+ local stripe_opt="$1"
+ local pool="$2"
+ shift 2
+ local pool_ostidx="$(seq $* | tr '\n' ' ')"
+
+ $LFS migrate $stripe_opt -p $pool $DIR/$tfile ||
+ error "Fail to migrate $tfile on $pool"
+ [[ "$($LFS getstripe -p $DIR/$tfile)" = "$pool" ]] ||
+ error "$tfile is not in pool $pool"
+ check_file_ost_range "$DIR/$tfile" $pool_ostidx ||
+ error "$tfile osts mismatch with pool $pool (osts $pool_ostidx)"
+}
+
+test_56xg() {
+ [[ $PARALLEL != "yes" ]] || skip "skip parallel run"
+ [[ $OSTCOUNT -ge 2 ]] || skip "needs >= 2 OSTs"
+ [[ $MDS1_VERSION -gt $(version_code 2.14.52) ]] ||
+ skip "Need MDS version newer than 2.14.52"
+
+ local -a pool_names=("${TESTNAME}_0" "${TESTNAME}_1" "${TESTNAME}_2")
+ local -a pool_ranges=("0 0" "1 1" "0 1")
+
+ # init pools
+ for i in "${!pool_names[@]}"; do
+ pool_add ${pool_names[$i]} ||
+ error "pool_add failed (pool: ${pool_names[$i]})"
+ pool_add_targets ${pool_names[$i]} ${pool_ranges[$i]} ||
+ error "pool_add_targets failed (pool: ${pool_names[$i]})"
+ done
+
+ # init the file to migrate
+ $LFS setstripe -c1 -i1 $DIR/$tfile ||
+ error "Unable to create $tfile on OST1"
+ dd if=/dev/urandom of=$DIR/$tfile bs=1M count=4 status=none ||
+ error "Unable to write on $tfile"
+
+ echo "1. migrate $tfile on pool ${pool_names[0]}"
+ sub_test_56xg "-c-1" "${pool_names[0]}" ${pool_ranges[0]}
+
+ echo "2. migrate $tfile on pool ${pool_names[2]}"
+ sub_test_56xg "-c-1 -S2M" "${pool_names[2]}" ${pool_ranges[2]}
+
+ echo "3. migrate $tfile on pool ${pool_names[1]}"
+ sub_test_56xg "-n -c-1" "${pool_names[1]}" ${pool_ranges[1]}
+
+ echo "4. migrate $tfile on pool ${pool_names[2]} with default stripe parameters"
+ sub_test_56xg "" "${pool_names[2]}" ${pool_ranges[2]}
+ echo
+
+ # Clean pools
+ destroy_test_pools ||
+ error "pool_destroy failed"
+}
+run_test 56xg "lfs migrate pool support"
+
test_56y() {
[ $MDS1_VERSION -lt $(version_code 2.4.53) ] &&
skip "No HSM $(lustre_build_version $SINGLEMDS) MDS < 2.4.53"
}
run_test 64f "check grant consumption (with grant allocation)"
+test_64g() {
+ #[ $MDS1_VERSION -lt $(version_code 2.14.54) ] &&
+ # skip "Need MDS version at least 2.14.54"
+
+ local mdts=$(comma_list $(mdts_nodes))
+
+ local old=$($LCTL get_param mdc.$FSNAME-*.grant_shrink_interval |
+ tr '\n' ' ')
+ stack_trap "$LCTL set_param $old"
+
+ # generate dirty pages and increase dirty granted on MDT
+ stack_trap "rm -f $DIR/$tfile-*"
+ for (( i = 0; i < 10; i++)); do
+ $LFS setstripe -E 1M -L mdt $DIR/$tfile-$i ||
+ error "can't set stripe"
+ dd if=/dev/zero of=$DIR/$tfile-$i bs=128k count=1 ||
+ error "can't dd"
+ $LFS getstripe $DIR/$tfile-$i | grep -q pattern.*mdt || {
+ $LFS getstripe $DIR/$tfile-$i
+ error "not DoM file"
+ }
+ done
+
+ # flush dirty pages
+ sync
+
+ # wait until grant shrink reset grant dirty on MDTs
+ for ((i = 0; i < 120; i++)); do
+ grant_dirty=$(do_nodes $mdts $LCTL get_param -n mdt.*.tot_dirty |
+ awk '{sum=sum+$1} END {print sum}')
+ vm_dirty=$(awk '/Dirty:/{print $2}' /proc/meminfo)
+ echo "$grant_dirty grants, $vm_dirty pages"
+ (( grant_dirty + vm_dirty == 0 )) && break
+ (( i == 3 )) && sync &&
+ $LCTL set_param mdc.$FSNAME-*.grant_shrink_interval=5
+ sleep 1
+ done
+
+ grant_dirty=$(do_nodes $mdts $LCTL get_param -n mdt.*.tot_dirty |
+ awk '{sum=sum+$1} END {print sum}')
+ (( grant_dirty == 0 )) || error "$grant_dirty on MDT"
+}
+run_test 64g "grant shrink on MDT"
+
+test_64h() {
+ local instance=$($LFS getname -i $DIR)
+ local osc_tgt="$FSNAME-OST0000-osc-$instance"
+ local num_exps=$(do_facet ost1 \
+ $LCTL get_param -n obdfilter.*OST0000*.num_exports)
+ local max_brw_size=$(import_param $osc_tgt max_brw_size)
+ local avail=$($LCTL get_param -n osc.*OST0000-osc-$instance.kbytesavail)
+ local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
+
+ # 10MiB is for file to be written, max_brw_size * 16 *
+ # num_exps is space reserve so that tgt_grant_shrink() decided
+ # to not shrink
+ local expect=$((max_brw_size * 16 * num_exps + 10 * 1048576))
+ (( avail * 1024 < expect )) &&
+ skip "need $expect bytes on ost1, have $(( avail * 1024 )) only"
+
+ save_lustre_params client "osc.*OST0000*.grant_shrink" > $p
+ save_lustre_params client "osc.*OST0000*.grant_shrink_interval" >> $p
+ stack_trap "restore_lustre_params < $p; rm -f $save" EXIT
+ $LCTL set_param osc.*OST0000*.grant_shrink=1
+ $LCTL set_param osc.*OST0000*.grant_shrink_interval=10
+
+ $LFS setstripe -c 1 -i 0 $DIR/$tfile
+ dd if=/dev/zero of=$DIR/$tfile bs=1M count=10 oflag=sync
+
+ # drop cache so that coming read would do rpc
+ cancel_lru_locks osc
+
+ # shrink interval is set to 10, pause for 7 seconds so that
+ # grant thread did not wake up yet but coming read entered
+ # shrink mode for rpc (osc_should_shrink_grant())
+ sleep 7
+
+ declare -a cur_grant_bytes
+ declare -a tot_granted
+ cur_grant_bytes[0]=$($LCTL get_param -n osc.*OST0000*.cur_grant_bytes)
+ tot_granted[0]=$(do_facet ost1 \
+ $LCTL get_param -n obdfilter.*OST0000*.tot_granted)
+
+ dd if=$DIR/$tfile bs=4K count=1 of=/dev/null
+
+ cur_grant_bytes[1]=$($LCTL get_param -n osc.*OST0000*.cur_grant_bytes)
+ tot_granted[1]=$(do_facet ost1 \
+ $LCTL get_param -n obdfilter.*OST0000*.tot_granted)
+
+ # grant change should be equal on both sides
+ (( cur_grant_bytes[0] - cur_grant_bytes[1] ==
+ tot_granted[0] - tot_granted[1])) ||
+ error "grant change mismatch, " \
+ "server: ${tot_granted[0]} to ${tot_granted[1]}, " \
+ "client: ${cur_grant_bytes[0]} to ${cur_grant_bytes[1]}"
+}
+run_test 64h "grant shrink on read"
+
# bug 1414 - set/get directories' stripe info
test_65a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
}
run_test 77n "Verify read from a hole inside contiguous blocks with T10PI"
+test_77o() {
+ (( $CLIENT_VERSION >= $(version_code 2.14.54) )) ||
+ skip "Need at least version 2.14.54"
+ local ofd=obdfilter
+ local mdt=mdt
+
+ # print OST checksum_type
+ echo "$ofd.$FSNAME-*.checksum_type:"
+ do_nodes $(comma_list $(osts_nodes)) \
+ $LCTL get_param -n $ofd.$FSNAME-*.checksum_type
+
+ # print MDT checksum_type
+ echo "$mdt.$FSNAME-*.checksum_type:"
+ do_nodes $(comma_list $(mdts_nodes)) \
+ $LCTL get_param -n $mdt.$FSNAME-*.checksum_type
+
+ local o_count=$(do_nodes $(comma_list $(osts_nodes)) \
+ $LCTL get_param -n $ofd.$FSNAME-*.checksum_type | wc -l)
+
+ (( $o_count == $OSTCOUNT )) ||
+ error "found $o_count checksums, not \$MDSCOUNT=$OSTCOUNT"
+
+ local m_count=$(do_nodes $(comma_list $(mdts_nodes)) \
+ $LCTL get_param -n $mdt.$FSNAME-*.checksum_type | wc -l)
+
+ (( $m_count == $MDSCOUNT )) ||
+ error "found $m_count checksums, not \$MDSCOUNT=$MDSCOUNT"
+}
+run_test 77o "Verify checksum_type for server (mdt and ofd(obdfilter))"
+
cleanup_test_78() {
trap 0
rm -f $DIR/$tfile
changelog_register --user test_160o -m unlnk+close+open ||
error "changelog_register failed"
- # drop server mask so it doesn't interfere
+
do_facet $SINGLEMDS $LCTL --device $mdt \
changelog_register -u "Tt3_-#" &&
error "bad symbols in name should fail"
}
run_test 160p "Changelog orphan cleanup with no users"
+test_160q() {
+ local mdt="$(facet_svc $SINGLEMDS)"
+ local clu
+
+ [[ $PARALLEL != "yes" ]] || skip "skip parallel run"
+ remote_mds_nodsh && skip "remote MDS with nodsh"
+ [ $MDS1_VERSION -ge $(version_code 2.14.54) ] ||
+ skip "Need MDS version at least 2.14.54"
+
+ # set server mask to minimal value like server init does
+ changelog_chmask "MARK"
+ clu=$(do_facet $SINGLEMDS $LCTL --device $mdt changelog_register -n) ||
+ error "changelog_register failed"
+ # check effective mask again, should be treated as DEFMASK now
+ mask=$(do_facet $SINGLEMDS $LCTL get_param \
+ mdd.$mdt.changelog_current_mask -n)
+ do_facet $SINGLEMDS $LCTL --device $mdt changelog_deregister $clu ||
+ error "changelog_deregister failed"
+ [[ $mask == *"HLINK"* ]] || error "mask is not DEFMASK as expected"
+}
+run_test 160q "changelog effective mask is DEFMASK if not set"
+
test_161a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
test_224a() { # LU-1039, MRP-303
[ $PARALLEL == "yes" ] && skip "skip parallel run"
-
#define OBD_FAIL_PTLRPC_CLIENT_BULK_CB 0x508
$LCTL set_param fail_loc=0x508
- dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1 conv=fsync
+ dd if=/dev/zero of=$DIR/$tfile bs=1M count=1 conv=fsync
$LCTL set_param fail_loc=0
df $DIR
}
run_test 224a "Don't panic on bulk IO failure"
-test_224b() { # LU-1039, MRP-303
+test_224bd_sub() { # LU-1039, MRP-303
[ $PARALLEL == "yes" ] && skip "skip parallel run"
+ local timeout=$1
- dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1
+ shift
+ dd if=/dev/urandom of=$TMP/$tfile bs=1M count=1
+
+ $LFS setstripe -c 1 -i 0 $DIR/$tfile
+
+ dd if=$TMP/$tfile of=$DIR/$tfile bs=1M count=1
cancel_lru_locks osc
+ set_checksums 0
+ stack_trap "set_checksums $ORIG_CSUM" EXIT
+ local at_max_saved=0
+
+ # adaptive timeouts may prevent seeing the issue
+ if at_is_enabled; then
+ at_max_saved=$(at_max_get mds)
+ at_max_set 0 mds client
+ stack_trap "at_max_set $at_max_saved mds client" EXIT
+ fi
+
#define OBD_FAIL_PTLRPC_CLIENT_BULK_CB2 0x515
- $LCTL set_param fail_loc=0x515
- dd of=/dev/null if=$DIR/$tfile bs=4096 count=1
- $LCTL set_param fail_loc=0
+ do_facet ost1 $LCTL set_param fail_val=$timeout fail_loc=0x80000515
+ dd of=$TMP/$tfile.new if=$DIR/$tfile bs=1M count=1 || "$@"
+
+ do_facet ost1 $LCTL set_param fail_loc=0
+ cmp $TMP/$tfile $TMP/$tfile.new || error "file contents wrong"
df $DIR
}
+
+test_224b() {
+ test_224bd_sub 3 error "dd failed"
+}
run_test 224b "Don't panic on bulk IO failure"
test_224c() { # LU-6441
}
run_test 224c "Don't hang if one of md lost during large bulk RPC"
+test_224d() { # LU-11169
+ test_224bd_sub $((TIMEOUT + 2)) error "dd failed"
+}
+run_test 224d "Don't corrupt data on bulk IO timeout"
+
MDSSURVEY=${MDSSURVEY:-$(which mds-survey 2>/dev/null || true)}
test_225a () {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
error "migrate remote dir error"
echo "Finish migration, then checking.."
- for file in $(find $migrate_dir); do
+ for file in $(find $migrate_dir -maxdepth 1); do
mdt_index=$($LFS getstripe -m $file)
if [ $mdt_index -lt $new_index ] ||
[ $mdt_index -gt $((new_index + new_count - 1)) ]; then
}
run_test 230t "migrate directory with project ID set"
+test_230u()
+{
+ (( MDSCOUNT > 3 )) || skip_env "needs >= 4 MDTs"
+ (( MDS1_VERSION >= $(version_code 2.14.53) )) ||
+ skip "Need MDS version at least 2.14.53"
+
+ local count
+
+ mkdir_on_mdt0 $DIR/$tdir || error "mkdir $tdir failed"
+ mkdir $DIR/$tdir/sub{0..99} || error "mkdir sub failed"
+ $LFS migrate -m -1 $DIR/$tdir/sub{0..99} || error "migrate sub failed"
+ for i in $(seq 0 $((MDSCOUNT - 1))); do
+ count=$($LFS getstripe -m $DIR/$tdir/sub* | grep -c ^$i)
+ echo "$count dirs migrated to MDT$i"
+ done
+ count=$($LFS getstripe -m $DIR/$tdir/sub* | sort -u | wc -l)
+ (( count >= MDSCOUNT - 1 )) || error "dirs migrated to $count MDTs"
+}
+run_test 230u "migrate directory by QOS"
+
+test_230v()
+{
+ (( MDSCOUNT > 3 )) || skip_env "needs >= 4 MDTs"
+ (( MDS1_VERSION >= $(version_code 2.14.53) )) ||
+ skip "Need MDS version at least 2.14.53"
+
+ local count
+
+ mkdir $DIR/$tdir || error "mkdir $tdir failed"
+ mkdir $DIR/$tdir/sub{0..99} || error "mkdir sub failed"
+ $LFS migrate -m 0,2,1 $DIR/$tdir || error "migrate $tdir failed"
+ for i in $(seq 0 $((MDSCOUNT - 1))); do
+ count=$($LFS getstripe -m $DIR/$tdir/sub* | grep -c ^$i)
+ echo "$count subdirs migrated to MDT$i"
+ (( i == 3 )) && (( count > 0 )) &&
+ error "subdir shouldn't be migrated to MDT3"
+ done
+ count=$($LFS getstripe -m $DIR/$tdir/sub* | sort -u | wc -l)
+ (( count == 3 )) || error "dirs migrated to $count MDTs"
+}
+run_test 230v "subdir migrated to the MDT where its parent is located"
+
test_231a()
{
# For simplicity this test assumes that max_pages_per_rpc
test_254() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
remote_mds_nodsh && skip "remote MDS with nodsh"
- do_facet $SINGLEMDS $LCTL get_param -n mdd.$MDT0.changelog_size ||
+
+ local mdt=$(facet_svc $SINGLEMDS)
+
+ do_facet $SINGLEMDS $LCTL get_param -n mdd.$mdt.changelog_size ||
skip "MDS does not support changelog_size"
local cl_user
- local MDT0=$(facet_svc $SINGLEMDS)
changelog_register || error "changelog_register failed"
changelog_clear 0 || error "changelog_clear failed"
local size1=$(do_facet $SINGLEMDS \
- $LCTL get_param -n mdd.$MDT0.changelog_size)
+ $LCTL get_param -n mdd.$mdt.changelog_size)
echo "Changelog size $size1"
rm -rf $DIR/$tdir
rm $DIR/$tdir/pics/desktop.jpg
local size2=$(do_facet $SINGLEMDS \
- $LCTL get_param -n mdd.$MDT0.changelog_size)
+ $LCTL get_param -n mdd.$mdt.changelog_size)
echo "Changelog size after work $size2"
(( $size2 > $size1 )) ||
}
run_test 270h "DoM: DoM stripe removal when disabled on server"
+test_270i() {
+ (( $MDS1_VERSION >= $(version_code 2.14.54) )) ||
+ skip "Need MDS version at least 2.14.54"
+
+ mkdir $DIR/$tdir
+ $LFS setstripe -L mdt -S 128k -c -1 $DIR/$tdir &&
+ error "setstripe should fail" || true
+}
+run_test 270i "DoM: setting invalid DoM striping should fail"
+
test_271a() {
[ $MDS1_VERSION -lt $(version_code 2.10.55) ] &&
skip "Need MDS version at least 2.10.55"
generate_uneven_mdts() {
local threshold=$1
+ local lmv_qos_maxage
+ local lod_qos_maxage
local ffree
local bavail
local max
local tmp
local i
+ lmv_qos_maxage=$($LCTL get_param -n lmv.*.qos_maxage)
+ $LCTL set_param lmv.*.qos_maxage=1
+ stack_trap "$LCTL set_param \
+ lmv.*.qos_maxage=$lmv_qos_maxage > /dev/null" RETURN
+ lod_qos_maxage=$(do_facet mds1 $LCTL get_param -n \
+ lod.$FSNAME-MDT0000-mdtlov.qos_maxage | awk '{ print $1 }')
+ do_nodes $(comma_list $(mdts_nodes)) $LCTL set_param \
+ lod.*.mdt_qos_maxage=1
+ stack_trap "do_nodes $(comma_list $(mdts_nodes)) $LCTL set_param \
+ lod.*.mdt_qos_maxage=$lod_qos_maxage > /dev/null" RETURN
+
echo
echo "Check for uneven MDTs: "
fi
done
+ (( ${ffree[min_index]} > 0 )) ||
+ skip "no free files in MDT$min_index"
+ (( ${ffree[min_index]} < 10000000 )) ||
+ skip "too many free files in MDT$min_index"
+
# Check if we need to generate uneven MDTs
local diff=$(((max - min) * 100 / min))
local testdir=$DIR/$tdir-fillmdt
+ local start
mkdir -p $testdir
while (( diff < threshold )); do
# generate uneven MDTs, create till $threshold% diff
echo -n "weight diff=$diff% must be > $threshold% ..."
- echo "Fill MDT$min_index with 100 files: loop $i"
+ echo "Fill MDT$min_index with 1000 files: loop $i"
testdir=$DIR/$tdir-fillmdt/$i
[ -d $testdir ] || $LFS mkdir -i $min_index $testdir ||
error "mkdir $testdir failed"
$LFS setstripe -E 1M -L mdt $testdir ||
error "setstripe $testdir failed"
- for F in f.{0..99}; do
- dd if=/dev/zero of=$testdir/$F bs=1M count=1 > \
+ start=$SECONDS
+ for F in f.{0..999}; do
+ dd if=/dev/zero of=$testdir/$F bs=64K count=1 > \
/dev/null 2>&1 || error "dd $F failed"
done
+ # wait for QOS to update
+ (( SECONDS < start + 1 )) && sleep $((start + 1 - SECONDS))
+
ffree=($(lctl get_param -n mdc.*[mM][dD][cC]-*.filesfree))
bavail=($(lctl get_param -n mdc.*[mM][dD][cC]-*.kbytesavail))
max=$(((${ffree[max_index]} >> 8) * \
local stripe_index=$($LFS getstripe -m $testdir)
local test_mkdir_rr=true
- echo "dirstripe: '$($LFS getdirstripe $testdir)'"
getfattr -d -m dmv -e hex $testdir | grep dmv
if (( $? == 0 && $MDS1_VERSION >= $(version_code 2.14.51) )); then
echo "defstripe: '$($LFS getdirstripe -D $testdir)'"
(( ${ffree[min_index]} > 0 )) ||
skip "no free files in MDT$min_index"
- (( ${ffree[min_index]} < 100000000 )) ||
+ (( ${ffree[min_index]} < 10000000 )) ||
skip "too many free files in MDT$min_index"
echo "MDT filesfree available: ${ffree[@]}"
error "$mkdir_cmd subdir$i failed"
done
+ max=0
for (( i = 0; i < $MDSCOUNT; i++ )); do
count=$($LFS getdirstripe -i $testdir/* | grep -c "^$i$")
+ (( count > max )) && max=$count
echo "$count directories created on MDT$i"
-
- if [ $stripe_count -gt 1 ]; then
- count=$($LFS getdirstripe $testdir/* |
- grep -c -P "^\s+$i\t")
- echo "$count stripes created on MDT$i"
- fi
done
- max=$($LFS getdirstripe -i $testdir/* | grep -c "^$max_index$")
min=$($LFS getdirstripe -i $testdir/* | grep -c "^$min_index$")
# D-value should > 10% of averge
- (( max - min >= num / 10 )) ||
+ (( max - min > num / 10 )) ||
error "subdirs shouldn't be evenly distributed: $max - $min < $((num / 10))"
- # 5% for stripes
+ # ditto for stripes
if (( stripe_count > 1 )); then
- max=$($LFS getdirstripe $testdir/* |
- grep -c -P "^\s+$max_index\t")
+ max=0
+ for (( i = 0; i < $MDSCOUNT; i++ )); do
+ count=$($LFS getdirstripe $testdir/* |
+ grep -c -P "^\s+$i\t")
+ (( count > max )) && max=$count
+ echo "$count stripes created on MDT$i"
+ done
+
min=$($LFS getdirstripe $testdir/* |
grep -c -P "^\s+$min_index\t")
- (( max - min >= num * stripe_count / 20 )) ||
- error "stripes shouldn't be evenly distributed: $max - $min < $((num / 20)) * $stripe_count"
+ (( max - min > num * stripe_count / 10 )) ||
+ error "stripes shouldn't be evenly distributed: $max - $min < $((num / 10)) * $stripe_count"
fi
}
local pid
for subdir in $(\ls -1 -d $DIR/d413*-fillmdt/*); do
- unlinkmany $subdir/f. 100 &
+ unlinkmany $subdir/f. 1000 &
pids="$pids $!"
done
[ "$1" == "blocks" ] && inodes= || inodes="-i"
for count in {1..100}; do
- cancel_lru_locks
+ do_nodes "$CLIENTS" \
+ $LCTL set_param ldlm.namespaces.*.lru_size=clear
sync; sleep 0.2
# read the lines of interest
# "<NID>:/<fsname>" for df, "filesystem_summary:" for lfs df
# compare the two outputs
passed=true
- for i in {1..5}; do
+ # skip "available" on MDT until LU-13997 is fixed.
+ #for i in {1..5}; do
+ for i in 1 2 4 5; do
[ "${df_out[i]}" != "${lfs_df_out[i]}" ] && passed=false
done
$passed && break
}
run_test 822 "test precreate failure"
+test_823() {
+ local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
+ local OST_MAX_PRECREATE=20000
+
+ save_lustre_params mds1 \
+ "osp.$FSNAME-OST*-osc-MDT0000.max_create_count" > $p
+ do_facet $SINGLEMDS "$LCTL set_param -n \
+ osp.$FSNAME-OST*MDT0000.max_create_count=0"
+ do_facet $SINGLEMDS "$LCTL set_param -n \
+ osp.$FSNAME-OST0000*MDT0000.max_create_count=$OST_MAX_PRECREATE"
+
+ stack_trap "restore_lustre_params < $p; rm $p"
+
+ do_facet $SINGLEMDS "$LCTL set_param -n \
+ osp.$FSNAME-OST*-osc-MDT*.create_count=100200"
+
+ local count=$(do_facet $SINGLEMDS "$LCTL get_param -n \
+ osp.$FSNAME-OST0000*MDT0000.create_count")
+ local max=$(do_facet $SINGLEMDS "$LCTL get_param -n \
+ osp.$FSNAME-OST0000*MDT0000.max_create_count")
+ local expect_count=$(((($max/2)/256) * 256))
+
+ log "setting create_count to 100200:"
+ log " -result- count: $count with max: $max, expecting: $expect_count"
+
+ [[ $count -eq expect_count ]] ||
+ error "Create count not set to max precreate."
+}
+run_test 823 "Setting create_count > OST_MAX_PRECREATE is lowered to maximum"
+
#
# tests that do cleanup/setup should be run at the end
#