set -e
ONLY=${ONLY:-"$*"}
-# bug number for skipped test: 13297 2108 9789 3637 9789 3561 5188
-ALWAYS_EXCEPT=" 42a 42b 42c 42d 45 68b $SANITY_EXCEPT"
+# bug number for skipped test: LU-9693 LU-6493 LU-9693 3561 5188
+ALWAYS_EXCEPT=" 42a 42b 42c 45 68b $SANITY_EXCEPT"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
-# with LOD/OSP landing
-# bug number for skipped tests: LU-2036 LU-8139
-ALWAYS_EXCEPT=" 76 101g $ALWAYS_EXCEPT"
+# skipped tests: LU-2036 LU-8411 LU-9096 LU-9054
+ALWAYS_EXCEPT=" 76 407 253 312 $ALWAYS_EXCEPT"
+
+# Check Grants after these tests
+GRANT_CHECK_LIST="$GRANT_CHECK_LIST 42a 42b 42c 42d 42e 63a 63b 64a 64b 64c"
is_sles11() # LU-4341
{
. ${CONFIG:=$LUSTRE/tests/cfg/${NAME}.sh}
init_logging
-# 5 12 (min)"
-[ "$SLOW" = "no" ] && EXCEPT_SLOW="24D 27m 64b 68 71 115 300o"
+# 5 12 (min)"
+[ "$SLOW" = "no" ] && EXCEPT_SLOW="27m 64b 68 71 115 300o"
if [ $(facet_fstype $SINGLEMDS) = "zfs" ]; then
- # bug number for skipped test: LU-4536 LU-1957
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 65ic 180"
+ # bug number for skipped test: LU-1957
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 180"
# 13 (min)"
[ "$SLOW" = "no" ] && EXCEPT_SLOW="$EXCEPT_SLOW 51b"
fi
test_mkdir $DIR/$tdir/d/subdir || error "mkdir $tdir/d/subdir failed"
$CHECKSTAT -g \#$RUNAS_GID $DIR/$tdir/d/subdir ||
error "$tdir/d/subdir should be GID $RUNAS_GID"
+ if [[ $MDSCOUNT -gt 1 ]]; then
+ # check remote dir sgid inherite
+ $LFS mkdir -i 0 $DIR/$tdir.local ||
+ error "mkdir $tdir.local failed"
+ chmod g+s $DIR/$tdir.local ||
+ error "chmod $tdir.local failed"
+ chgrp $RUNAS_GID $DIR/$tdir.local ||
+ error "chgrp $tdir.local failed"
+ $LFS mkdir -i 1 $DIR/$tdir.local/$tdir.remote ||
+ error "mkdir $tdir.remote failed"
+ $CHECKSTAT -g \#$RUNAS_GID $DIR/$tdir.local/$tdir.remote ||
+ error "$tdir.remote should be owned by $UID.$RUNAS_ID"
+ $CHECKSTAT -p 02755 $DIR/$tdir.local/$tdir.remote ||
+ error "$tdir.remote should be mode 02755"
+ fi
}
run_test 6g "Is new dir in sgid dir inheriting group?"
local rc=0
test_mkdir -p $WDIR
- mdt_index=$($LFS getstripe -M $WDIR)
- mdt_index=$((mdt_index+1))
-
touch $WDIR/$tfile
+ mdt_index=$($LFS getstripe -M $WDIR/$tfile)
+ mdt_index=$((mdt_index+1))
+ cancel_lru_locks mdc
#fail mds will wait the failover finish then set
#following fail_loc to avoid interfer the recovery process.
fail mds${mdt_index}
test_20() {
touch $DIR/$tfile
rm $DIR/$tfile
- log "1 done"
touch $DIR/$tfile
rm $DIR/$tfile
- log "2 done"
touch $DIR/$tfile
rm $DIR/$tfile
- log "3 done"
$CHECKSTAT -a $DIR/$tfile || error "$tfile was not removed"
}
run_test 20 "touch .../f ; ls -l ... ==========================="
}
simple_cleanup_common() {
+ local rc=0
trap 0
+ [ -z "$DIR" -o -z "$tdir" ] && return 0
+
+ local start=$SECONDS
rm -rf $DIR/$tdir
+ rc=$?
wait_delete_completed
+ echo "cleanup time $((SECONDS - start))"
+ return $rc
}
max_pages_per_rpc() {
- $LCTL get_param -n mdc.*.max_pages_per_rpc | head -n1
+ local mdtname="$(printf "MDT%04x" ${1:-0})"
+ $LCTL get_param -n mdc.*$mdtname*.max_pages_per_rpc
}
test_24v() {
- local NRFILES=100000
- local FREE_INODES=$(mdt_free_inodes 0)
- [[ $FREE_INODES -lt $NRFILES ]] &&
- skip "not enough free inodes $FREE_INODES required $NRFILES" &&
- return
-
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- trap simple_cleanup_common EXIT
-
+ local nrfiles=${COUNT:-100000}
# Performance issue on ZFS see LU-4072 (c.f. LU-2887)
- [ $(facet_fstype $SINGLEMDS) = "zfs" ] && NRFILES=10000
+ [ $(facet_fstype $SINGLEMDS) = "zfs" ] && nrfiles=${COUNT:-10000}
- test_mkdir -p $DIR/$tdir
- createmany -m $DIR/$tdir/$tfile $NRFILES
+ local fname="$DIR/$tdir/$tfile"
+ test_mkdir "$(dirname $fname)"
+ # assume MDT0000 has the fewest inodes
+ local stripes=$($LFS getdirstripe -c $(dirname $fname))
+ local free_inodes=$(($(mdt_free_inodes 0) * stripes))
+ [[ $free_inodes -lt $nrfiles ]] && nrfiles=$free_inodes
+
+ trap simple_cleanup_common EXIT
+
+ createmany -m "$fname" $nrfiles
cancel_lru_locks mdc
lctl set_param mdc.*.stats clear
- ls $DIR/$tdir >/dev/null || error "error in listing large dir"
-
+ # was previously test_24D: LU-6101
+ # readdir() returns correct number of entries after cursor reload
+ local num_ls=$(ls $DIR/$tdir | wc -l)
+ local num_uniq=$(ls $DIR/$tdir | sort -u | wc -l)
+ local num_all=$(ls -a $DIR/$tdir | wc -l)
+ if [ $num_ls -ne $nrfiles -o $num_uniq -ne $nrfiles -o \
+ $num_all -ne $((nrfiles + 2)) ]; then
+ error "Expected $nrfiles files, got $num_ls " \
+ "($num_uniq unique $num_all .&..)"
+ fi
# LU-5 large readdir
- # DIRENT_SIZE = 32 bytes for sizeof(struct lu_dirent) +
- # 8 bytes for name(filename is mostly 5 in this test) +
- # 8 bytes for luda_type
+ # dirent_size = 32 bytes for sizeof(struct lu_dirent) +
+ # N bytes for name (len($nrfiles) rounded to 8 bytes) +
+ # 8 bytes for luda_type (4 bytes rounded to 8 bytes)
# take into account of overhead in lu_dirpage header and end mark in
- # each page, plus one in RPC_NUM calculation.
- DIRENT_SIZE=48
- RPC_SIZE=$(($(max_pages_per_rpc) * $(page_size)))
- RPC_NUM=$(((NRFILES * DIRENT_SIZE + RPC_SIZE - 1) / RPC_SIZE + 1))
- mds_readpage=$(lctl get_param mdc.*MDT0000*.stats |
- awk '/^mds_readpage/ {print $2}')
- [[ $mds_readpage -gt $RPC_NUM ]] &&
- error "large readdir doesn't take effect"
+ # each page, plus one in rpc_num calculation.
+ local dirent_size=$((32 + (${#tfile} | 7) + 1 + 8))
+ local page_entries=$((($(page_size) - 24) / dirent_size))
+ local mdt_idx=$($LFS getdirstripe -i $(dirname $fname))
+ local rpc_pages=$(max_pages_per_rpc $mdt_idx)
+ local rpc_max=$((nrfiles / (page_entries * rpc_pages) + stripes))
+ local mds_readpage=$(calc_stats mdc.*.stats mds_readpage)
+ echo "readpages: $mds_readpage rpc_max: $rpc_max"
+ (( $mds_readpage < $rpc_max - 2 || $mds_readpage > $rpc_max + 1)) &&
+ error "large readdir doesn't take effect: " \
+ "$mds_readpage should be about $rpc_max"
simple_cleanup_common
}
-run_test 24v "list directory with large files (handle hash collision, bug: 17560)"
+run_test 24v "list large directory (test hash collision, b=17560)"
test_24w() { # bug21506
SZ1=234852
rm -rf $DIR/$tdir
test_mkdir -p $DIR/$tdir
+ trap simple_cleanup_common EXIT
createmany -m $DIR/$tdir/$tfile $NFILES
local t=$(ls $DIR/$tdir | wc -l)
local u=$(ls $DIR/$tdir | sort -u | wc -l)
error "Expected $NFILES files, got $t ($u unique $v .&..)"
fi
- rm -rf $DIR/$tdir || error "Can not delete directories"
+ simple_cleanup_common || error "Can not delete directories"
}
run_test 24A "readdir() returns correct number of entries."
}
run_test 24C "check .. in striped dir"
-test_24D() { # LU-6101
- local NFILES=50000
-
- rm -rf $DIR/$tdir
- mkdir -p $DIR/$tdir
- createmany -m $DIR/$tdir/$tfile $NFILES
- local t=$(ls $DIR/$tdir | wc -l)
- local u=$(ls $DIR/$tdir | sort -u | wc -l)
- local v=$(ls -ai $DIR/$tdir | sort -u | wc -l)
- if [ $t -ne $NFILES -o $u -ne $NFILES -o $v -ne $((NFILES + 2)) ] ; then
- error "Expected $NFILES files, got $t ($u unique $v .&..)"
- fi
-
- rm -rf $DIR/$tdir || error "Can not delete directories"
-}
-run_test 24D "readdir() returns correct number of entries after cursor reload"
-
test_24E() {
[[ $MDSCOUNT -lt 4 ]] && skip "needs >= 4 MDTs" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
rm -r $tfile || error "rm $tfile failed"
$CHECKSTAT -a $DIR/$tfile || error "$tfile not gone"
}
-run_test 26f "rm -r of a directory which has recursive symlink ="
+run_test 26f "rm -r of a directory which has recursive symlink"
test_27a() {
- echo '== stripe sanity =============================================='
test_mkdir -p $DIR/d27 || error "mkdir failed"
- $GETSTRIPE $DIR/d27
- $SETSTRIPE -c 1 $DIR/d27/f0 || error "setstripe failed"
+ $LFS getstripe $DIR/d27
+ $LFS setstripe -c 1 $DIR/d27/f0 || error "setstripe failed"
$CHECKSTAT -t file $DIR/d27/f0 || error "checkstat failed"
- log "== test_27a: write to one stripe file ========================="
cp /etc/hosts $DIR/d27/f0 || error
}
-run_test 27a "one stripe file =================================="
+run_test 27a "one stripe file"
test_27b() {
[[ $OSTCOUNT -lt 2 ]] && skip_env "skipping 2-stripe test" && return
test_mkdir -p $DIR/d27
- $SETSTRIPE -c 2 $DIR/d27/f01 || error "setstripe failed"
- $GETSTRIPE -c $DIR/d27/f01
- [ $($GETSTRIPE -c $DIR/d27/f01) -eq 2 ] ||
+ $LFS setstripe -c 2 $DIR/d27/f01 || error "setstripe failed"
+ $LFS getstripe -c $DIR/d27/f01
+ [ $($LFS getstripe -c $DIR/d27/f01) -eq 2 ] ||
error "two-stripe file doesn't have two stripes"
dd if=/dev/zero of=$DIR/d27/f01 bs=4k count=4 || error "dd failed"
test_27d() {
test_mkdir -p $DIR/d27
- $SETSTRIPE -c 0 -i -1 -S 0 $DIR/d27/fdef || error "setstripe failed"
+ $LFS setstripe -c 0 -i -1 -S 0 $DIR/d27/fdef || error "setstripe failed"
$CHECKSTAT -t file $DIR/d27/fdef || error "checkstat failed"
dd if=/dev/zero of=$DIR/d27/fdef bs=4k count=4 || error
}
-run_test 27d "create file with default settings ================"
+run_test 27d "create file with default settings"
test_27e() {
# LU-5839 adds check for existed layout before setting it
[[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.56) ]] &&
skip "Need MDS version at least 2.7.56" && return
test_mkdir -p $DIR/d27
- $SETSTRIPE -c 2 $DIR/d27/f12 || error "setstripe failed"
- $SETSTRIPE -c 2 $DIR/d27/f12 && error "setstripe succeeded twice"
+ $LFS setstripe -c 2 $DIR/d27/f12 || error "setstripe failed"
+ $LFS setstripe -c 2 $DIR/d27/f12 && error "setstripe succeeded twice"
$CHECKSTAT -t file $DIR/d27/f12 || error "checkstat failed"
}
-run_test 27e "setstripe existing file (should return error) ======"
+run_test 27e "setstripe existing file (should return error)"
test_27f() {
test_mkdir $DIR/$tdir
- $SETSTRIPE -S 100 -i 0 -c 1 $DIR/$tdir/$tfile &&
+ $LFS setstripe -S 100 -i 0 -c 1 $DIR/$tdir/$tfile &&
error "$SETSTRIPE $DIR/$tdir/$tfile failed"
$CHECKSTAT -t file $DIR/$tdir/$tfile &&
error "$CHECKSTAT -t file $DIR/$tdir/$tfile should fail"
dd if=/dev/zero of=$DIR/$tdir/$tfile bs=4k count=4 || error "dd failed"
- $GETSTRIPE $DIR/$tdir/$tfile || error "$GETSTRIPE failed"
+ $LFS getstripe $DIR/$tdir/$tfile || error "$LFS getstripe failed"
}
run_test 27f "setstripe with bad stripe size (should return error)"
test_27g() {
test_mkdir -p $DIR/d27
$MCREATE $DIR/d27/fnone || error "mcreate failed"
- $GETSTRIPE $DIR/d27/fnone 2>&1 | grep "no stripe info" ||
+ $LFS getstripe $DIR/d27/fnone 2>&1 | grep "no stripe info" ||
error "$DIR/d27/fnone has object"
}
-run_test 27g "$GETSTRIPE with no objects"
+run_test 27g "$LFS getstripe with no objects"
test_27i() {
test_mkdir $DIR/$tdir
touch $DIR/$tdir/$tfile || error "touch failed"
- [[ $($GETSTRIPE -c $DIR/$tdir/$tfile) -gt 0 ]] ||
+ [[ $($LFS getstripe -c $DIR/$tdir/$tfile) -gt 0 ]] ||
error "missing objects"
}
-run_test 27i "$GETSTRIPE with some objects"
+run_test 27i "$LFS getstripe with some objects"
test_27j() {
test_mkdir -p $DIR/d27
- $SETSTRIPE -i $OSTCOUNT $DIR/d27/f27j && error "setstripe failed"||true
+ $LFS setstripe -i $OSTCOUNT $DIR/d27/f27j &&
+ error "setstripe failed" || true
}
run_test 27j "setstripe with bad stripe offset (should return error)"
FILE=$DIR/d27/f27k
LL_MAX_BLKSIZE=$((4 * 1024 * 1024))
[ ! -d $DIR/d27 ] && test_mkdir -p $DIR d27
- $SETSTRIPE -S 67108864 $FILE || error "setstripe failed"
- BLKSIZE=`stat $FILE | awk '/IO Block:/ { print $7 }'`
+ $LFS setstripe -S 67108864 $FILE || error "setstripe failed"
+ BLKSIZE=$(stat $FILE | awk '/IO Block:/ { print $7 }')
[ $BLKSIZE -le $LL_MAX_BLKSIZE ] || error "1:$BLKSIZE > $LL_MAX_BLKSIZE"
dd if=/dev/zero of=$FILE bs=4k count=1
- BLKSIZE=`stat $FILE | awk '/IO Block:/ { print $7 }'`
+ BLKSIZE=$(stat $FILE | awk '/IO Block:/ { print $7 }')
[ $BLKSIZE -le $LL_MAX_BLKSIZE ] || error "2:$BLKSIZE > $LL_MAX_BLKSIZE"
}
-run_test 27k "limit i_blksize for broken user apps ============="
+run_test 27k "limit i_blksize for broken user apps"
test_27l() {
test_mkdir -p $DIR/d27
mcreate $DIR/f27l || error "creating file"
- $RUNAS $SETSTRIPE -c 1 $DIR/f27l && \
+ $RUNAS $SETSTRIPE -c 1 $DIR/f27l &&
error "setstripe should have failed" || true
}
run_test 27l "check setstripe permissions (should return error)"
fi
trap simple_cleanup_common EXIT
test_mkdir -p $DIR/$tdir
- $SETSTRIPE -i 0 -c 1 $DIR/$tdir/f27m_1
+ $LFS setstripe -i 0 -c 1 $DIR/$tdir/f27m_1
dd if=/dev/zero of=$DIR/$tdir/f27m_1 bs=1024 count=$MAXFREE &&
error "dd should fill OST0"
i=2
- while $SETSTRIPE -i 0 -c 1 $DIR/$tdir/f27m_$i; do
+ while $LFS setstripe -i 0 -c 1 $DIR/$tdir/f27m_$i; do
i=$((i + 1))
[ $i -gt 256 ] && break
done
i=$((i + 1))
touch $DIR/$tdir/f27m_$i
- [ `$GETSTRIPE $DIR/$tdir/f27m_$i | grep -A 10 obdidx | awk '{print $1}'| grep -w "0"` ] &&
+ [ $($LFS getstripe $DIR/$tdir/f27m_$i | grep -A 10 obdidx |
+ awk '{print $1}' | grep -w "0") ] &&
error "OST0 was full but new created file still use it"
i=$((i + 1))
touch $DIR/$tdir/f27m_$i
- [ `$GETSTRIPE $DIR/$tdir/f27m_$i | grep -A 10 obdidx | awk '{print $1}'| grep -w "0"` ] &&
+ [ $($LFS getstripe $DIR/$tdir/f27m_$i | grep -A 10 obdidx |
+ awk '{print $1}'| grep -w "0") ] &&
error "OST0 was full but new created file still use it"
simple_cleanup_common
}
-run_test 27m "create file while OST0 was full =================="
+run_test 27m "create file while OST0 was full"
sleep_maxage() {
- local DELAY=$(do_facet $SINGLEMDS lctl get_param -n lov.*.qos_maxage | head -n 1 | awk '{print $1 * 2}')
- sleep $DELAY
+ local DELAY=$(do_facet $SINGLEMDS lctl get_param -n lov.*.qos_maxage |
+ head -n 1 | awk '{print $1 * 2}')
+ sleep $DELAY
}
# OSCs keep a NOSPC flag that will be reset after ~5s (qos_maxage)
reset_enospc
rm -f $DIR/$tdir/$tfile
exhaust_precreations 0 0x80000215
- $SETSTRIPE -c -1 $DIR/$tdir
+ $LFS setstripe -c -1 $DIR/$tdir
touch $DIR/$tdir/$tfile || error
- $GETSTRIPE $DIR/$tdir/$tfile
+ $LFS getstripe $DIR/$tdir/$tfile
reset_enospc
}
-run_test 27n "create file with some full OSTs =================="
+run_test 27n "create file with some full OSTs"
test_27o() {
[[ $OSTCOUNT -lt 2 ]] && skip_env "too few OSTs" && return
reset_enospc
rm -rf $DIR/$tdir/*
}
-run_test 27o "create file with all full OSTs (should error) ===="
+run_test 27o "create file with all full OSTs (should error)"
test_27p() {
[[ $OSTCOUNT -lt 2 ]] && skip_env "too few OSTs" && return
exhaust_precreations 0 0x80000215
echo foo >> $DIR/$tdir/$tfile || error "append failed"
$CHECKSTAT -s 80000004 $DIR/$tdir/$tfile || error "checkstat failed"
- $GETSTRIPE $DIR/$tdir/$tfile
+ $LFS getstripe $DIR/$tdir/$tfile
reset_enospc
}
-run_test 27p "append to a truncated file with some full OSTs ==="
+run_test 27p "append to a truncated file with some full OSTs"
test_27q() {
[[ $OSTCOUNT -lt 2 ]] && skip_env "too few OSTs" && return
test_mkdir -p $DIR/$tdir
$MCREATE $DIR/$tdir/$tfile || error "mcreate $DIR/$tdir/$tfile failed"
- $TRUNCATE $DIR/$tdir/$tfile 80000000 ||error "truncate $DIR/$tdir/$tfile failed"
+ $TRUNCATE $DIR/$tdir/$tfile 80000000 ||
+ error "truncate $DIR/$tdir/$tfile failed"
$CHECKSTAT -s 80000000 $DIR/$tdir/$tfile || error "checkstat failed"
exhaust_all_precreations 0x215
reset_enospc
}
-run_test 27q "append to truncated file with all OSTs full (should error) ==="
+run_test 27q "append to truncated file with all OSTs full (should error)"
test_27r() {
[[ $OSTCOUNT -lt 2 ]] && skip_env "too few OSTs" && return
rm -f $DIR/$tdir/$tfile
exhaust_precreations 0 0x80000215
- $SETSTRIPE -i 0 -c 2 $DIR/$tdir/$tfile # && error
+ $LFS setstripe -i 0 -c 2 $DIR/$tdir/$tfile # && error
reset_enospc
}
local stripe_size=$((4096 * 1024 * 1024)) # 2^32
local stripe_count=0
[ $OSTCOUNT -eq 1 ] || stripe_count=2
- $SETSTRIPE -S $stripe_size -c $stripe_count $DIR/$tdir &&
+ $LFS setstripe -S $stripe_size -c $stripe_count $DIR/$tdir &&
error "stripe width >= 2^32 succeeded" || true
}
#define OBD_FAIL_MDS_OSC_PRECREATE 0x139
do_nodes $list $LCTL set_param fail_loc=0x139
test_mkdir -p $DIR/$tdir
- rm -rf $DIR/$tdir/*
+ trap simple_cleanup_common EXIT
createmany -o $DIR/$tdir/t- 1000
do_nodes $list $LCTL set_param fail_loc=0
- TLOG=$DIR/$tfile.getstripe
- $GETSTRIPE $DIR/$tdir > $TLOG
+ TLOG=$TMP/$tfile.getstripe
+ $LFS getstripe $DIR/$tdir > $TLOG
OBJS=$(awk -vobj=0 '($1 == 0) { obj += 1 } END { print obj; }' $TLOG)
unlinkmany $DIR/$tdir/t- 1000
+ trap 0
[[ $OBJS -gt 0 ]] &&
error "$OBJS objects created on OST-0. See $TLOG" || pass
}
-run_test 27u "skip object creation on OSC w/o objects =========="
+run_test 27u "skip object creation on OSC w/o objects"
test_27v() { # bug 4900
[[ $OSTCOUNT -lt 2 ]] && skip_env "too few OSTs" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
- remote_ost_nodsh && skip "remote OST with nodsh" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
- exhaust_all_precreations 0x215
- reset_enospc
+ exhaust_all_precreations 0x215
+ reset_enospc
- test_mkdir -p $DIR/$tdir
- $SETSTRIPE -c 1 $DIR/$tdir # 1 stripe / file
+ test_mkdir $DIR/$tdir
+ $LFS setstripe -c 1 $DIR/$tdir # 1 stripe / file
touch $DIR/$tdir/$tfile
#define OBD_FAIL_TGT_DELAY_PRECREATE 0x705
sleep $((TIMEOUT / 2 - PROCESS))
reset_enospc
}
-run_test 27v "skip object creation on slow OST ================="
+run_test 27v "skip object creation on slow OST"
test_27w() { # bug 10997
- test_mkdir -p $DIR/$tdir || error "mkdir failed"
- $SETSTRIPE -S 65536 $DIR/$tdir/f0 || error "setstripe failed"
- [ $($GETSTRIPE -S $DIR/$tdir/f0) -ne 65536 ] &&
- error "stripe size $size != 65536" || true
- [ $($GETSTRIPE -d $DIR/$tdir | grep -c "stripe_count") -ne 1 ] &&
- error "$GETSTRIPE -d $DIR/$tdir failed" || true
+ test_mkdir $DIR/$tdir || error "mkdir failed"
+ $LFS setstripe -S 65536 $DIR/$tdir/f0 || error "setstripe failed"
+ [ $($LFS getstripe -S $DIR/$tdir/f0) -ne 65536 ] &&
+ error "stripe size $size != 65536" || true
+ [ $($LFS getstripe -d $DIR/$tdir | grep -c "stripe_count") -ne 1 ] &&
+ error "$LFS getstripe -d $DIR/$tdir failed" || true
}
-run_test 27w "check $SETSTRIPE -S option"
+run_test 27w "check $LFS setstripe -S option"
test_27wa() {
[[ $OSTCOUNT -lt 2 ]] &&
skip_env "skipping multiple stripe count/offset test" && return
- test_mkdir -p $DIR/$tdir || error "mkdir failed"
- for i in $(seq 1 $OSTCOUNT); do
- offset=$((i - 1))
- $SETSTRIPE -c $i -i $offset $DIR/$tdir/f$i ||
- error "setstripe -c $i -i $offset failed"
- count=$($GETSTRIPE -c $DIR/$tdir/f$i)
- index=$($GETSTRIPE -i $DIR/$tdir/f$i)
- [ $count -ne $i ] && error "stripe count $count != $i" || true
- [ $index -ne $offset ] &&
- error "stripe offset $index != $offset" || true
- done
+ test_mkdir $DIR/$tdir || error "mkdir failed"
+ for i in $(seq 1 $OSTCOUNT); do
+ offset=$((i - 1))
+ $LFS setstripe -c $i -i $offset $DIR/$tdir/f$i ||
+ error "setstripe -c $i -i $offset failed"
+ count=$($LFS getstripe -c $DIR/$tdir/f$i)
+ index=$($LFS getstripe -i $DIR/$tdir/f$i)
+ [ $count -ne $i ] && error "stripe count $count != $i" || true
+ [ $index -ne $offset ] &&
+ error "stripe offset $index != $offset" || true
+ done
}
-run_test 27wa "check $SETSTRIPE -c -i options"
+run_test 27wa "check $LFS setstripe -c -i options"
test_27x() {
remote_ost_nodsh && skip "remote OST with nodsh" && return
local OST=$(ostname_from_index $OSTIDX)
test_mkdir -p $DIR/$tdir
- $SETSTRIPE -c 1 $DIR/$tdir # 1 stripe per file
+ $LFS setstripe -c 1 $DIR/$tdir # 1 stripe per file
do_facet ost$((OSTIDX + 1)) lctl set_param -n obdfilter.$OST.degraded 1
sleep_maxage
createmany -o $DIR/$tdir/$tfile $OSTCOUNT
- for i in `seq 0 $OFFSET`; do
- [ `$GETSTRIPE $DIR/$tdir/$tfile$i | grep -A 10 obdidx | awk '{print $1}' | grep -w "$OSTIDX"` ] &&
+ for i in $(seq 0 $OFFSET); do
+ [ $($LFS getstripe $DIR/$tdir/$tfile$i | grep -A 10 obdidx |
+ awk '{print $1}' | grep -w "$OSTIDX") ] &&
error "OST0 was degraded but new created file still use it"
done
do_facet ost$((OSTIDX + 1)) lctl set_param -n obdfilter.$OST.degraded 0
test_27y() {
[[ $OSTCOUNT -lt 2 ]] &&
skip_env "$OSTCOUNT < 2 OSTs -- skipping" && return
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
- remote_ost_nodsh && skip "remote OST with nodsh" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- local mdtosc=$(get_mdtosc_proc_path $SINGLEMDS $FSNAME-OST0000)
- local last_id=$(do_facet $SINGLEMDS lctl get_param -n \
- osc.$mdtosc.prealloc_last_id)
- local next_id=$(do_facet $SINGLEMDS lctl get_param -n \
- osc.$mdtosc.prealloc_next_id)
- local fcount=$((last_id - next_id))
+ local mdtosc=$(get_mdtosc_proc_path $SINGLEMDS $FSNAME-OST0000)
+ local last_id=$(do_facet $SINGLEMDS lctl get_param -n \
+ osc.$mdtosc.prealloc_last_id)
+ local next_id=$(do_facet $SINGLEMDS lctl get_param -n \
+ osc.$mdtosc.prealloc_next_id)
+ local fcount=$((last_id - next_id))
[[ $fcount -eq 0 ]] && skip "not enough space on OST0" && return
[[ $fcount -gt $OSTCOUNT ]] && fcount=$OSTCOUNT
OSTIDX=$(index_from_ostuuid $OST)
test_mkdir -p $DIR/$tdir
- $SETSTRIPE -c 1 $DIR/$tdir # 1 stripe / file
+ $LFS setstripe -c 1 $DIR/$tdir # 1 stripe / file
for OSC in $MDS_OSCS; do
OST=$(osc_to_ost $OSC)
# sleep 2*lod_qos_maxage seconds waiting for lod qos to notice osp
# devices get activated.
sleep_maxage
- $SETSTRIPE -c -1 $DIR/$tfile
- stripecnt=$($GETSTRIPE -c $DIR/$tfile)
+ $LFS setstripe -c -1 $DIR/$tfile
+ stripecnt=$($LFS getstripe -c $DIR/$tfile)
rm -f $DIR/$tfile
[ $stripecnt -ne $OSTCOUNT ] &&
error "Of $OSTCOUNT OSTs, only $stripecnt is available"
fi
local obj_file="O/$seq/d$((oid %32))/$oid_hex"
- local ff
+ local ff=""
#
# Don't unmount/remount the OSTs if we don't need to do that.
# LU-2577 changes filter_fid to be smaller, so debugfs needs
# update too, until that use mount/ll_decode_filter_fid/mount.
# Re-enable when debugfs will understand new filter_fid.
#
- if false && [ $(facet_fstype ost$ost) == ldiskfs ]; then
+ if [ $(facet_fstype ost$ost) == ldiskfs ]; then
ff=$(do_facet ost$ost "$DEBUGFS -c -R 'stat $obj_file' \
$dev 2>/dev/null" | grep "parent=")
- else
+ fi
+ if [ -z "$ff" ]; then
stop ost$ost
mount_fstype ost$ost
ff=$(do_facet ost$ost $LL_DECODE_FILTER_FID \
# /mnt/O/0/d23/23: objid=23 seq=0 parent=[0x200000400:0x1e:0x1]
# fid: objid=23 seq=0 parent=[0x200000400:0x1e:0x0] stripe=1
- local ff_parent=$(echo $ff|sed -e 's/.*parent=.//')
- local ff_pseq=$(echo $ff_parent | cut -d: -f1)
- local ff_poid=$(echo $ff_parent | cut -d: -f2)
+ #
+ # fid: parent=[0x200000400:0x1e:0x0] stripe=1 stripe_count=2 \
+ # stripe_size=1048576 component_id=1 component_start=0 \
+ # component_end=33554432
+ local ff_parent=$(sed -e 's/.*parent=.//' <<<$ff)
+ local ff_pseq=$(cut -d: -f1 <<<$ff_parent)
+ local ff_poid=$(cut -d: -f2 <<<$ff_parent)
local ff_pstripe
- if echo $ff_parent | grep -q 'stripe='; then
- ff_pstripe=$(echo $ff_parent | sed -e 's/.*stripe=//')
+ if grep -q 'stripe=' <<<$ff; then
+ ff_pstripe=$(sed -e 's/.*stripe=//' -e 's/ .*//' <<<$ff)
else
- #
# $LL_DECODE_FILTER_FID does not print "stripe="; look
- # into f_ver in this case. See the comment on
- # ff_parent.
- #
- ff_pstripe=$(echo $ff_parent | cut -d: -f3 |
- sed -e 's/\]//')
+ # into f_ver in this case. See comment on ff_parent.
+ ff_pstripe=$(cut -d: -f3 <<<$ff_parent | sed -e 's/]//')
fi
- # compare lmm_seq and filter_fid->ff_parent.f_seq
- [ $ff_pseq = $lmm_seq ] ||
- error "FF parent SEQ $ff_pseq != $lmm_seq"
- # compare lmm_object_id and filter_fid->ff_parent.f_oid
- [ $ff_poid = $lmm_oid ] ||
- error "FF parent OID $ff_poid != $lmm_oid"
+ if grep -q 'stripe_count=' <<<$ff; then
+ local ff_scnt=$(sed -e 's/.*stripe_count=//' \
+ -e 's/ .*//' <<<$ff)
+ [ $lmm_count = $ff_scnt ] ||
+ error "FF stripe count $lmm_count != $ff_scnt"
+ fi
+ # compare lmm_seq and filter_fid->ff_parent.f_seq
+ [ $ff_pseq = $lmm_seq ] ||
+ error "FF parent SEQ $ff_pseq != $lmm_seq"
+ # compare lmm_object_id and filter_fid->ff_parent.f_oid
+ [ $ff_poid = $lmm_oid ] ||
+ error "FF parent OID $ff_poid != $lmm_oid"
(($ff_pstripe == $stripe_nr)) ||
- error "FF stripe $ff_pstripe != $stripe_nr"
+ error "FF stripe $ff_pstripe != $stripe_nr"
- stripe_nr=$((stripe_nr + 1))
- done
+ stripe_nr=$((stripe_nr + 1))
+ done
}
test_27z() {
pool_add_targets $POOL $ost_range || error "pool_add_targets failed"
local skip27D
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.64) ] &&
- skip27D = "-s 29"
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.55) ] &&
+ skip27D += "-s 29"
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.9.55) ] &&
+ skip27D += "-s 30,31"
llapi_layout_test -d$DIR/$tdir -p$POOL -o$OSTCOUNT $skip27D ||
error "llapi_layout_test failed"
- cleanup_pools || error "cleanup_pools failed"
+ destroy_test_pools || error "destroy test pools failed"
}
run_test 27D "validate llapi_layout API"
run_test 27E "check that default extended attribute size properly increases"
test_27F() { # LU-5346/LU-7975
-
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
-
[[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.51) ]] &&
skip "Need MDS version at least 2.8.51" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
test_mkdir -p $DIR/$tdir
rm -f $DIR/$tdir/f0
cleanup_test32_mount() {
local rc=0
trap 0
- local loopdev=$(losetup -a | grep $EXT2_DEV | sed -ne 's/:.*$/p')
+ local loopdev=$(losetup -a | grep $EXT2_DEV | sed -ne 's/:.*$//p')
$UMOUNT $DIR/$tdir/ext2-mountpoint || rc=$?
losetup -d $loopdev || true
- rm -rf $DIR/$tdir/ext2-mountpoint
+ rm -rf $DIR/$tdir
return $rc
}
run_test 32o "stat d32o/symlink->tmp/symlink->lustre-root/$tfile"
test_32p() {
- log 32p_1
+ log 32p_1
rm -fr $DIR/d32p
- log 32p_2
+ log 32p_2
rm -f $DIR/$tfile
- log 32p_3
+ log 32p_3
touch $DIR/$tfile
- log 32p_4
+ log 32p_4
test_mkdir -p $DIR/d32p/tmp
- log 32p_5
+ log 32p_5
TMP_DIR=$DIR/d32p/tmp
- log 32p_6
+ log 32p_6
ln -s $DIR/$tfile $TMP_DIR/symlink12
- log 32p_7
+ log 32p_7
ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
- log 32p_8
+ log 32p_8
cat $DIR/d32p/tmp/symlink12 || error
- log 32p_9
+ log 32p_9
cat $DIR/d32p/symlink02 || error
- log 32p_10
+ log 32p_10
}
run_test 32p "open d32p/symlink->tmp/symlink->lustre-root/$tfile"
-cleanup_testdir_mount() {
- local rc=0
- trap 0
- local loopdev=$(losetup -a | grep $EXT2_DEV | sed -ne 's/:.*$/p')
- $UMOUNT $DIR/$tdir || rc=$?
- losetup -d $loopdev || true
- rm -rf $DIR/$tdir
- return $rc
-}
-
test_32q() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ -e $DIR/$tdir ] && rm -fr $DIR/$tdir
- trap cleanup_testdir_mount EXIT
- test_mkdir -p $DIR/$tdir
- touch $DIR/$tdir/under_the_mount
- mount -t ext2 -o loop $EXT2_DEV $DIR/$tdir
- ls $DIR/$tdir | grep "\<under_the_mount\>" && error
- cleanup_testdir_mount
+ trap cleanup_test32_mount EXIT
+ test_mkdir -p $DIR/$tdir/ext2-mountpoint
+ touch $DIR/$tdir/ext2-mountpoint/under_the_mount
+ mount -t ext2 -o loop $EXT2_DEV $DIR/$tdir/ext2-mountpoint
+ ls $DIR/$tdir/ext2-mountpoint | grep "\<under_the_mount\>" && error
+ cleanup_test32_mount
}
run_test 32q "stat follows mountpoints in Lustre (should return error)"
test_32r() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ -e $DIR/$tdir ] && rm -fr $DIR/$tdir
- trap cleanup_testdir_mount EXIT
- test_mkdir -p $DIR/$tdir
- touch $DIR/$tdir/under_the_mount
- mount -t ext2 -o loop $EXT2_DEV $DIR/$tdir
- ls $DIR/$tdir | grep -q under_the_mount && error || true
- cleanup_testdir_mount
+ trap cleanup_test32_mount EXIT
+ test_mkdir -p $DIR/$tdir/ext2-mountpoint
+ touch $DIR/$tdir/ext2-mountpoint/under_the_mount
+ mount -t ext2 -o loop $EXT2_DEV $DIR/$tdir/ext2-mountpoint
+ ls $DIR/$tdir/ext2-mountpoint | grep -q under_the_mount && error || true
+ cleanup_test32_mount
}
run_test 32r "opendir follows mountpoints in Lustre (should return error)"
}
run_test 33f "nonroot user can create, access, and remove a striped directory"
+test_33g() {
+ mkdir -p $DIR/$tdir/dir2
+
+ local err=$($RUNAS mkdir $DIR/$tdir/dir2 2>&1)
+ echo $err
+ [[ $err =~ "exists" ]] || error "Not exists error"
+}
+run_test 33g "nonroot user create already existing root created file"
+
TEST_34_SIZE=${TEST_34_SIZE:-2000000000000}
test_34a() {
rm -f $DIR/f34
}
run_test 38 "open a regular file with O_DIRECTORY should return -ENOTDIR ==="
-test_39() {
+test_39a() { # was test_39
touch $DIR/$tfile
touch $DIR/${tfile}2
# ls -l $DIR/$tfile $DIR/${tfile}2
error "O_TRUNC didn't change timestamps"
fi
}
-run_test 39 "mtime changed on create ==========================="
+run_test 39a "mtime changed on create ==========================="
test_39b() {
test_mkdir -p -c1 $DIR/$tdir
error "$BEFOREWRITES < $AFTERWRITES"
start_writeback
}
-run_test 42a "ensure that we don't flush on close =============="
+run_test 42a "ensure that we don't flush on close"
test_42b() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
}
run_test 42e "verify sub-RPC writes are not done synchronously"
-test_43() {
+test_43A() { # was test_43
test_mkdir -p $DIR/$tdir
cp -p /bin/ls $DIR/$tdir/$tfile
$MULTIOP $DIR/$tdir/$tfile Ow_c &
# give multiop a chance to open
sleep 1
- $DIR/$tdir/$tfile && error || true
+ $DIR/$tdir/$tfile && error "execute $DIR/$tdir/$tfile succeeded" || true
kill -USR1 $pid
}
-run_test 43 "execution of file opened for write should return -ETXTBSY"
+run_test 43A "execution of file opened for write should return -ETXTBSY"
test_43a() {
- [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- test_mkdir -p $DIR/$tdir
- cp -p `which $MULTIOP` $DIR/$tdir/multiop ||
- cp -p multiop $DIR/$tdir/multiop
+ test_mkdir $DIR/$tdir
+ cp -p $(which $MULTIOP) $DIR/$tdir/multiop ||
+ cp -p multiop $DIR/$tdir/multiop
MULTIOP_PROG=$DIR/$tdir/multiop multiop_bg_pause $TMP/$tfile.junk O_c ||
- return 1
- MULTIOP_PID=$!
- $MULTIOP $DIR/$tdir/multiop Oc && error "expected error, got success"
- kill -USR1 $MULTIOP_PID || return 2
- wait $MULTIOP_PID || return 3
- rm $TMP/$tfile.junk $DIR/$tdir/multiop
+ error "multiop open $TMP/$tfile.junk failed"
+ MULTIOP_PID=$!
+ $MULTIOP $DIR/$tdir/multiop Oc && error "expected error, got success"
+ kill -USR1 $MULTIOP_PID || error "kill -USR1 PID $MULTIOP_PID failed"
+ wait $MULTIOP_PID || error "wait PID $MULTIOP_PID failed"
}
run_test 43a "open(RDWR) of file being executed should return -ETXTBSY"
test_43b() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- test_mkdir -p $DIR/$tdir
- cp -p `which $MULTIOP` $DIR/$tdir/multiop ||
- cp -p multiop $DIR/$tdir/multiop
+ test_mkdir $DIR/$tdir
+ cp -p $(which $MULTIOP) $DIR/$tdir/multiop ||
+ cp -p multiop $DIR/$tdir/multiop
MULTIOP_PROG=$DIR/$tdir/multiop multiop_bg_pause $TMP/$tfile.junk O_c ||
- return 1
- MULTIOP_PID=$!
- $TRUNCATE $DIR/$tdir/multiop 0 && error "expected error, got success"
- kill -USR1 $MULTIOP_PID || return 2
- wait $MULTIOP_PID || return 3
- rm $TMP/$tfile.junk $DIR/$tdir/multiop
+ error "multiop open $TMP/$tfile.junk failed"
+ MULTIOP_PID=$!
+ $TRUNCATE $DIR/$tdir/multiop 0 && error "expected error, got success"
+ kill -USR1 $MULTIOP_PID || error "kill -USR1 PID $MULTIOP_PID failed"
+ wait $MULTIOP_PID || error "wait PID $MULTIOP_PID failed"
}
run_test 43b "truncate of file being executed should return -ETXTBSY"
test_43c() {
local testdir="$DIR/$tdir"
- test_mkdir -p $DIR/$tdir
+ test_mkdir $testdir
cp $SHELL $testdir/
- ( cd $(dirname $SHELL) && md5sum $(basename $SHELL) ) | \
- ( cd $testdir && md5sum -c)
+ ( cd $(dirname $SHELL) && md5sum $(basename $SHELL) ) |
+ ( cd $testdir && md5sum -c )
}
-run_test 43c "md5sum of copy into lustre========================"
+run_test 43c "md5sum of copy into lustre"
-test_44() {
+test_44A() { # was test_44
[[ $OSTCOUNT -lt 2 ]] && skip_env "skipping 2-stripe test" && return
dd if=/dev/zero of=$DIR/f1 bs=4k count=1 seek=1023
dd if=$DIR/f1 bs=4k count=1 > /dev/null
}
-run_test 44 "zero length read from a sparse stripe ============="
+run_test 44A "zero length read from a sparse stripe"
test_44a() {
local nstripe=$($LCTL lov_getconfig $DIR | grep default_stripe_count: |
}
run_test 51e "check file nlink limit"
+test_51f() {
+ test_mkdir $DIR/$tdir
+
+ local max=100000
+ local ulimit_old=$(ulimit -n)
+ local spare=20 # number of spare fd's for scripts/libraries, etc.
+ local mdt=$(lfs getstripe -M $DIR/$tdir)
+ local numfree=$(lfs df -i $DIR/$tdir | awk '/MDT:'$mdt'/ { print $4 }')
+
+ echo "MDT$mdt numfree=$numfree, max=$max"
+ [[ $numfree -gt $max ]] && numfree=$max || numfree=$((numfree * 7 / 8))
+ if [ $((numfree + spare)) -gt $ulimit_old ]; then
+ while ! ulimit -n $((numfree + spare)); do
+ numfree=$((numfree * 3 / 4))
+ done
+ echo "changed ulimit from $ulimit_old to $((numfree + spare))"
+ else
+ echo "left ulimit at $ulimit_old"
+ fi
+
+ createmany -o -k -t 120 $DIR/$tdir/f $numfree ||
+ error "create+open $numfree files in $DIR/$tdir failed"
+ ulimit -n $ulimit_old
+
+ # if createmany exits at 120s there will be fewer than $numfree files
+ unlinkmany $DIR/$tdir/f $numfree || true
+}
+run_test 51f "check many open files limit"
+
test_52a() {
[ -f $DIR/$tdir/foo ] && chattr -a $DIR/$tdir/foo
test_mkdir -p $DIR/$tdir
run_test 53 "verify that MDS and OSTs agree on pre-creation ===="
test_54a() {
+ perl -MSocket -e ';' || { skip "no Socket perl module installed" && return; }
+
$SOCKETSERVER $DIR/socket ||
error "$SOCKETSERVER $DIR/socket failed: $?"
$SOCKETCLIENT $DIR/socket ||
}
run_test 56b "check $LFS getdirstripe"
+test_56c() {
+ local ost_idx=0
+ local ost_name=$(ostname_from_index $ost_idx)
+
+ local old_status=$(ost_dev_status $ost_idx)
+ [[ -z "$old_status" ]] ||
+ { skip_env "OST $ost_name is in $old_status status"; return 0; }
+
+ do_facet ost1 $LCTL set_param -n obdfilter.$ost_name.degraded=1
+ sleep_maxage
+
+ local new_status=$(ost_dev_status $ost_idx)
+ [[ "$new_status" = "D" ]] ||
+ error "OST $ost_name is in status of '$new_status', not 'D'"
+
+ do_facet ost1 $LCTL set_param -n obdfilter.$ost_name.degraded=0
+ sleep_maxage
+
+ new_status=$(ost_dev_status $ost_idx)
+ [[ -z "$new_status" ]] ||
+ error "OST $ost_name is in status of '$new_status', not ''"
+}
+run_test 56c "check 'lfs df' showing device status"
+
NUMFILES=3
NUMDIRS=3
setup_56() {
test_56s() { # LU-611
TDIR=$DIR/${tdir}s
- setup_56 $NUMFILES $NUMDIRS "-c $OSTCOUNT"
+ #LU-9369
+ setup_56 0 $NUMDIRS
+ for i in $(seq 1 $NUMDIRS); do
+ $SETSTRIPE -c $((OSTCOUNT + 1)) $TDIR/dir$i/$tfile
+ done
+ EXPECTED=$NUMDIRS
+ CMD="$LFIND -c $OSTCOUNT $TDIR"
+ NUMS=$($CMD | wc -l)
+ [ $NUMS -eq $EXPECTED ] || {
+ $GETSTRIPE -R $TDIR
+ error "\"$CMD\" wrong: found $NUMS, expected $EXPECTED"
+ }
+ rm -rf $TDIR
+
+ setup_56 $NUMFILES $NUMDIRS "-c $OSTCOUNT"
if [[ $OSTCOUNT -gt 1 ]]; then
$SETSTRIPE -c 1 $TDIR/$tfile.{0,1,2,3}
ONESTRIPE=4
test_56t() { # LU-611
TDIR=$DIR/${tdir}t
+
+ #LU-9369
+ setup_56 0 $NUMDIRS
+ for i in $(seq 1 $NUMDIRS); do
+ $SETSTRIPE -S 4M $TDIR/dir$i/$tfile
+ done
+ EXPECTED=$NUMDIRS
+ CMD="$LFIND -S 4M $TDIR"
+ NUMS=$($CMD | wc -l)
+ [ $NUMS -eq $EXPECTED ] || {
+ $GETSTRIPE -R $TDIR
+ error "\"$CMD\" wrong: found $NUMS, expected $EXPECTED"
+ }
+ rm -rf $TDIR
+
setup_56 $NUMFILES $NUMDIRS "--stripe-size 512k"
$SETSTRIPE -S 256k $TDIR/$tfile.{0,1,2,3}
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
TDIR=$DIR/${tdir}w
- rm -rf $TDIR || error "remove $TDIR failed"
- setup_56 $NUMFILES $NUMDIRS "-c $OSTCOUNT" "-c1"
-
- local stripe_size
- stripe_size=$($GETSTRIPE -S -d $TDIR) ||
- error "$GETSTRIPE -S -d $TDIR failed"
- stripe_size=${stripe_size%% *}
-
- local file_size=$((stripe_size * OSTCOUNT))
- local file_num=$((NUMDIRS * NUMFILES + NUMFILES))
- local required_space=$((file_num * file_size))
-
- local free_space=$($LCTL get_param -n lov.$FSNAME-clilov-*.kbytesavail |
- head -n1)
- [[ $free_space -le $((required_space / 1024)) ]] &&
- skip_env "need at least $required_space bytes free space," \
- "have $free_space kbytes" && return
-
- local dd_bs=65536
- local dd_count=$((file_size / dd_bs))
-
- # write data into the files
- local i
- local j
- local file
- for i in $(seq 1 $NUMFILES); do
- file=$TDIR/file$i
- yes | dd bs=$dd_bs count=$dd_count of=$file >/dev/null 2>&1 ||
- error "write data into $file failed"
- done
- for i in $(seq 1 $NUMDIRS); do
- for j in $(seq 1 $NUMFILES); do
- file=$TDIR/dir$i/file$j
- yes | dd bs=$dd_bs count=$dd_count of=$file \
- >/dev/null 2>&1 ||
- error "write data into $file failed"
- done
- done
+ rm -rf $TDIR || error "remove $TDIR failed"
+ setup_56 $NUMFILES $NUMDIRS "-c $OSTCOUNT" "-c1"
- local expected=-1
- [[ $OSTCOUNT -gt 1 ]] && expected=$((OSTCOUNT - 1))
+ local stripe_size
+ stripe_size=$($GETSTRIPE -S -d $TDIR) ||
+ error "$GETSTRIPE -S -d $TDIR failed"
+ stripe_size=${stripe_size%% *}
- # lfs_migrate file
- local cmd="$LFS_MIGRATE -y -c $expected $TDIR/file1"
- echo "$cmd"
- eval $cmd || error "$cmd failed"
+ local file_size=$((stripe_size * OSTCOUNT))
+ local file_num=$((NUMDIRS * NUMFILES + NUMFILES))
+ local required_space=$((file_num * file_size))
+
+ local free_space=$($LCTL get_param -n lov.$FSNAME-clilov-*.kbytesavail |
+ head -n1)
+ [[ $free_space -le $((required_space / 1024)) ]] &&
+ skip_env "need $required_space bytes, have $free_space KB" &&
+ return
+
+ local dd_bs=65536
+ local dd_count=$((file_size / dd_bs))
+
+ # write data into the files
+ local i
+ local j
+ local file
+ for i in $(seq 1 $NUMFILES); do
+ file=$TDIR/file$i
+ yes | dd bs=$dd_bs count=$dd_count of=$file &>/dev/null ||
+ error "write data into $file failed"
+ done
+ for i in $(seq 1 $NUMDIRS); do
+ for j in $(seq 1 $NUMFILES); do
+ file=$TDIR/dir$i/file$j
+ yes|dd bs=$dd_bs count=$dd_count of=$file &>/dev/null ||
+ error "write data into $file failed"
+ done
+ done
- check_stripe_count $TDIR/file1 $expected
+ # $LFS_MIGRATE will fail if hard link migration is unsupported
+ if [[ $(lustre_version_code mds1) -gt $(version_code 2.5.55) ]]; then
+ createmany -l$TDIR/dir1/file1 $TDIR/dir1/link 200 ||
+ error "creating links to $TDIR/dir1/file1 failed"
+ fi
+
+ local expected=-1
+ [[ $OSTCOUNT -gt 1 ]] && expected=$((OSTCOUNT - 1))
+
+ # lfs_migrate file
+ local cmd="$LFS_MIGRATE -y -c $expected $TDIR/file1"
+ echo "$cmd"
+ eval $cmd || error "$cmd failed"
+
+ check_stripe_count $TDIR/file1 $expected
if [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.90) ];
then
start mgs $(mgsdevname) $MGS_MOUNT_OPTS || error "start mgs failed"
$pass || error "test failed, see FAILED test_60a messages for specifics"
}
-run_test 60a "llog_test run from kernel module and test llog_reader =========="
+run_test 60a "llog_test run from kernel module and test llog_reader"
+
+test_60aa() {
+ # test old logid format
+ if [ $(lustre_version_code mgs) -le $(version_code 3.1.53) ]; then
+ do_facet mgs $LCTL dl | grep MGS
+ do_facet mgs "$LCTL --device %MGS llog_print \\\\\\\$$FSNAME-client" ||
+ error "old llog_print failed"
+ fi
+
+ # test new logid format
+ if [ $(lustre_version_code mgs) -ge $(version_code 2.9.53) ]; then
+ do_facet mgs "$LCTL --device MGS llog_print $FSNAME-client" ||
+ error "new llog_print failed"
+ fi
+}
+run_test 60aa "llog_print works with FIDs and simple names"
test_60b() { # bug 6411
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
}
run_test 66 "update inode blocks count on client ==============="
-LLOOP=
-LLITELOOPLOAD=
-cleanup_68() {
- [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- trap 0
- if [ ! -z "$LLOOP" ]; then
- if swapon -s | grep -q $LLOOP; then
- swapoff $LLOOP || error "swapoff failed"
- fi
-
- $LCTL blockdev_detach $LLOOP || error "detach failed"
- rm -f $LLOOP
- unset LLOOP
- fi
- if [ ! -z "$LLITELOOPLOAD" ]; then
- rmmod llite_lloop
- unset LLITELOOPLOAD
- fi
- rm -f $DIR/f68*
-}
-
meminfo() {
awk '($1 == "'$1':") { print $2 }' /proc/meminfo
}
swapon -s | awk '($1 == "'$1'") { print $4 }'
}
-# test case for lloop driver, basic function
-test_68a() {
- [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- [ "$UID" != 0 ] && skip_env "must run as root" && return
- llite_lloop_enabled || \
- { skip_env "llite_lloop module disabled" && return; }
-
- trap cleanup_68 EXIT
-
- if ! module_loaded llite_lloop; then
- if load_module llite/llite_lloop; then
- LLITELOOPLOAD=yes
- else
- skip_env "can't find module llite_lloop"
- return
- fi
- fi
-
- LLOOP=$TMP/lloop.`date +%s`.`date +%N`
- dd if=/dev/zero of=$DIR/f68a bs=4k count=1024
- $LCTL blockdev_attach $DIR/f68a $LLOOP || error "attach failed"
-
- directio rdwr $LLOOP 0 1024 4096 || error "direct write failed"
- directio rdwr $LLOOP 0 1025 4096 && error "direct write should fail"
-
- cleanup_68
-}
-run_test 68a "lloop driver - basic test ========================"
-
-# excercise swapping to lustre by adding a high priority swapfile entry
-# and then consuming memory until it is used.
-test_68b() { # was test_68
- [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- [ "$UID" != 0 ] && skip_env "must run as root" && return
- lctl get_param -n devices | grep -q obdfilter && \
- skip "local OST" && return
-
- grep -q llite_lloop /proc/modules
- [ $? -ne 0 ] && skip "can't find module llite_lloop" && return
-
- [ -z "`$LCTL list_nids | grep -v tcp`" ] && \
- skip "can't reliably test swap with TCP" && return
-
- MEMTOTAL=`meminfo MemTotal`
- NR_BLOCKS=$((MEMTOTAL>>8))
- [[ $NR_BLOCKS -le 2048 ]] && NR_BLOCKS=2048
-
- LLOOP=$TMP/lloop.`date +%s`.`date +%N`
- dd if=/dev/zero of=$DIR/f68b bs=64k seek=$NR_BLOCKS count=1
- mkswap $DIR/f68b
-
- $LCTL blockdev_attach $DIR/f68b $LLOOP || error "attach failed"
-
- trap cleanup_68 EXIT
-
- swapon -p 32767 $LLOOP || error "swapon $LLOOP failed"
-
- echo "before: `swapon -s | grep $LLOOP`"
- $MEMHOG $MEMTOTAL || error "error allocating $MEMTOTAL kB"
- echo "after: `swapon -s | grep $LLOOP`"
- SWAPUSED=`swap_used $LLOOP`
-
- cleanup_68
-
- [ $SWAPUSED -eq 0 ] && echo "no swap used???" || true
-}
-run_test 68b "support swapping to Lustre ========================"
-
# bug5265, obdfilter oa2dentry return -ENOENT
# #define OBD_FAIL_SRV_ENOENT 0x217
test_69() {
}
run_test 77b "checksum error on client write, read"
+cleanup_77c() {
+ trap 0
+ set_checksums 0
+ $LCTL set_param osc.*osc-[^mM]*.checksum_dump=0
+ $check_ost &&
+ do_facet ost1 $LCTL set_param obdfilter.*-OST*.checksum_dump=0
+ [ -n $osc_file_prefix ] && rm -f ${osc_file_prefix}*
+ $check_ost && [ -n $ost_file_prefix ] &&
+ do_facet ost1 rm -f ${ost_file_prefix}\*
+}
+
+test_77c() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ $GSS && skip "could not run with gss" && return
+
+ local bad1
+ local osc_file_prefix
+ local osc_file
+ local check_ost=false
+ local ost_file_prefix
+ local ost_file
+ local orig_cksum
+ local dump_cksum
+ local fid
+
+ # ensure corruption will occur on first OSS/OST
+ $LFS setstripe -i 0 $DIR/$tfile
+
+ [ ! -f $F77_TMP ] && setup_f77
+ dd if=$F77_TMP of=$DIR/$tfile bs=1M count=$F77SZ conv=sync ||
+ error "dd write error: $?"
+ fid=$($LFS path2fid $DIR/$tfile)
+
+ if [ $(lustre_version_code ost1) -ge $(version_code 2.9.57) ]
+ then
+ check_ost=true
+ ost_file_prefix=$(do_facet ost1 $LCTL get_param -n debug_path)
+ ost_file_prefix=${ost_file_prefix}-checksum_dump-ost-\\${fid}
+ else
+ echo "OSS do not support bulk pages dump upon error"
+ fi
+
+ osc_file_prefix=$($LCTL get_param -n debug_path)
+ osc_file_prefix=${osc_file_prefix}-checksum_dump-osc-\\${fid}
+
+ trap cleanup_77c EXIT
+
+ set_checksums 1
+ # enable bulk pages dump upon error on Client
+ $LCTL set_param osc.*osc-[^mM]*.checksum_dump=1
+ # enable bulk pages dump upon error on OSS
+ $check_ost &&
+ do_facet ost1 $LCTL set_param obdfilter.*-OST*.checksum_dump=1
+
+ # flush Client cache to allow next read to reach OSS
+ cancel_lru_locks osc
+
+ #define OBD_FAIL_OSC_CHECKSUM_RECEIVE 0x408
+ $LCTL set_param fail_loc=0x80000408
+ dd if=$DIR/$tfile of=/dev/null bs=1M || error "dd read error: $?"
+ $LCTL set_param fail_loc=0
+
+ rm -f $DIR/$tfile
+
+ # check cksum dump on Client
+ osc_file=$(ls ${osc_file_prefix}*)
+ [ -n "$osc_file" ] || error "no checksum dump file on Client"
+ # OBD_FAIL_OSC_CHECKSUM_RECEIVE corrupts with "bad1" at start of file
+ bad1=$(dd if=$osc_file bs=1 count=4 2>/dev/null) || error "dd error: $?"
+ [ $bad1 == "bad1" ] || error "unexpected corrupt pattern"
+ orig_cksum=$(dd if=$F77_TMP bs=1 skip=4 count=1048572 2>/dev/null |
+ cksum)
+ dump_cksum=$(dd if=$osc_file bs=1 skip=4 2>/dev/null | cksum)
+ [[ "$orig_cksum" == "$dump_cksum" ]] ||
+ error "dump content does not match on Client"
+
+ $check_ost || skip "No need to check cksum dump on OSS"
+
+ # check cksum dump on OSS
+ ost_file=$(do_facet ost1 ls ${ost_file_prefix}\*)
+ [ -n "$ost_file" ] || error "no checksum dump file on OSS"
+ orig_cksum=$(dd if=$F77_TMP bs=1048576 count=1 2>/dev/null | cksum)
+ dump_cksum=$(do_facet ost1 dd if=$ost_file 2>/dev/null \| cksum)
+ [[ "$orig_cksum" == "$dump_cksum" ]] ||
+ error "dump content does not match on OSS"
+
+ cleanup_77c
+}
+run_test 77c "checksum error on client read with debug"
+
test_77d() { # bug 10889
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$GSS && skip "could not run with gss" && return
}
run_test 77g "checksum error on OST write, read"
-test_77i() { # bug 13805
- [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- $GSS && skip "could not run with gss" && return
- #define OBD_FAIL_OSC_CONNECT_CKSUM 0x40b
- lctl set_param fail_loc=0x40b
- remount_client $MOUNT
- lctl set_param fail_loc=0
- for VALUE in `lctl get_param osc.*osc-[^mM]*.checksum_type`; do
- PARAM=`echo ${VALUE[0]} | cut -d "=" -f1`
- algo=`lctl get_param -n $PARAM | sed 's/.*\[\(.*\)\].*/\1/g'`
- [ "$algo" = "adler" ] || error "algo set to $algo instead of adler"
- done
- remount_client $MOUNT
-}
-run_test 77i "client not supporting OSD_CONNECT_CKSUM"
-
test_77j() { # bug 13805
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$GSS && skip "could not run with gss" && return
lctl set_param fail_loc=0x40c
remount_client $MOUNT
lctl set_param fail_loc=0
- sleep 2 # wait async osc connect to finish
- for VALUE in `lctl get_param osc.*osc-[^mM]*.checksum_type`; do
- PARAM=`echo ${VALUE[0]} | cut -d "=" -f1`
- algo=`lctl get_param -n $PARAM | sed 's/.*\[\(.*\)\].*/\1/g'`
+ # wait async osc connect to finish and reflect updated state value
+ local i
+ for (( i=0; i < OSTCOUNT; i++ )) ; do
+ wait_osc_import_state client ost$((i+1)) FULL
+ done
+
+ for VALUE in $(lctl get_param osc.*osc-[^mM]*.checksum_type); do
+ PARAM=$(echo ${VALUE[0]} | cut -d "=" -f1)
+ algo=$(lctl get_param -n $PARAM | sed 's/.*\[\(.*\)\].*/\1/g')
[ "$algo" = "adler" ] || error "algo set to $algo instead of adler"
done
remount_client $MOUNT
}
run_test 82 "Basic grouplock test ==============================="
+test_83() {
+ local sfile="/boot/System.map-$(uname -r)"
+ # define OBD_FAIL_LLITE_PTASK_IO_FAIL 0x140d
+ $LCTL set_param fail_loc=0x140d
+ cp $sfile $DIR/$tfile || error "write failed"
+ diff -c $sfile $DIR/$tfile || error "files are different"
+ $LCTL set_param fail_loc=0
+ rm -f $DIR/$tfile
+}
+run_test 83 "Short write in ptask ==============================="
+
test_99a() {
[ -z "$(which cvs 2>/dev/null)" ] && skip_env "could not find cvs" &&
return
test_100() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- [ "$NETTYPE" = tcp ] || \
- { skip "TCP secure port test, not useful for NETTYPE=$NETTYPE" && \
+ [[ "$NETTYPE" =~ tcp ]] ||
+ { skip "TCP secure port test, not useful for NETTYPE=$NETTYPE" &&
return ; }
remote_ost_nodsh && skip "remote OST with nodsh" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
- remote_servers || \
+ remote_servers ||
{ skip "useless for local single node setup" && return; }
netstat -tna | ( rc=1; while read PROT SND RCV LOCAL REMOTE STAT; do
test_101f() {
which iozone || { skip "no iozone installed" && return; }
+ local old_debug=$($LCTL get_param debug)
+ old_debug=${old_debug#*=}
+ $LCTL set_param debug="reada mmap"
+
# create a test file
iozone -i 0 -+n -r 1m -s 128m -w -f $DIR/$tfile > /dev/null 2>&1
$LCTL set_param -n llite.*.read_ahead_stats 0
echo mmap read the file with small block size
- iozone -i 1 -+n -r 32k -s 128m -B -f $DIR/$tfile > /dev/null 2>&1
+ iozone -i 1 -u 1 -l 1 -+n -r 32k -s 128m -B -f $DIR/$tfile \
+ > /dev/null 2>&1
echo checking missing pages
+ $LCTL get_param llite.*.read_ahead_stats
local miss=$($LCTL get_param -n llite.*.read_ahead_stats |
get_named_value 'misses' | cut -d" " -f1 | calc_total)
- [ $miss -lt 3 ] || error "misses too much pages!"
+ $LCTL set_param debug="$old_debug"
+ [ $miss -lt 3 ] || error "misses too much pages ('$miss')!"
rm -f $DIR/$tfile
}
run_test 101f "check mmap read performance"
-test_101g() {
- local rpcs
- local osts=$(get_facets OST)
- local list=$(comma_list $(osts_nodes))
- local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
+test_101g_brw_size_test() {
+ local mb=$1
+ local pages=$((mb * 1048576 / $(page_size)))
- save_lustre_params $osts "obdfilter.*.brw_size" > $p
+ $LCTL set_param osc.*.max_pages_per_rpc=${mb}M ||
+ { error "unable to set max_pages_per_rpc=${mb}M"; return 1; }
+ for mp in $($LCTL get_param -n osc.*.max_pages_per_rpc); do
+ [ $mp -ne $pages ] && error "max_pages_per_rpc $mp != $pages" &&
+ return 2
+ done
- $LFS setstripe -c 1 $DIR/$tfile
+ $LCTL set_param -n osc.*.rpc_stats=0
- if [ $(lustre_version_code ost1) -ge $(version_code 2.8.52) ]; then
- set_osd_param $list '' brw_size 16M
-
- echo "remount client to enable large RPC size"
- remount_client $MOUNT || error "remount_client failed"
+ # 10 RPCs should be enough for the test
+ local count=10
+ dd if=/dev/zero of=$DIR/$tfile bs=${mb}M count=$count ||
+ { error "dd write ${mb} MB blocks failed"; return 3; }
+ cancel_lru_locks osc
+ dd of=/dev/null if=$DIR/$tfile bs=${mb}M count=$count ||
+ { error "dd write ${mb} MB blocks failed"; return 4; }
- for mp in $($LCTL get_param -n osc.*.max_pages_per_rpc); do
- [ "$mp" -eq 4096 ] ||
- error "max_pages_per_rpc not correctly set"
- done
+ # calculate number of full-sized read and write RPCs
+ rpcs=($($LCTL get_param -n 'osc.*.rpc_stats' |
+ sed -n '/pages per rpc/,/^$/p' |
+ awk '/'$pages':/ { reads += $2; writes += $6 }; \
+ END { print reads,writes }'))
+ [ ${rpcs[0]} -ne $count ] && error "${rpcs[0]} != $count read RPCs" &&
+ return 5
+ [ ${rpcs[1]} -ne $count ] && error "${rpcs[1]} != $count write RPCs" &&
+ return 6
- $LCTL set_param -n osc.*.rpc_stats=0
+ return 0
+}
- # 10*16 MiB should be enough for the test
- dd if=/dev/zero of=$DIR/$tfile bs=16M count=10
- cancel_lru_locks osc
- dd of=/dev/null if=$DIR/$tfile bs=16M count=10
+test_101g() {
+ local rpcs
+ local osts=$(get_facets OST)
+ local list=$(comma_list $(osts_nodes))
+ local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
+ local brw_size="obdfilter.*.brw_size"
- # calculate 16 MiB RPCs
- rpcs=$($LCTL get_param 'osc.*.rpc_stats' |
- sed -n '/pages per rpc/,/^$/p' |
- awk 'BEGIN { sum = 0 }; /4096:/ { sum += $2 };
- END { print sum }')
- echo $rpcs RPCs
- [ "$rpcs" -eq 10 ] || error "not all RPCs are 16 MiB BRW rpcs"
- fi
+ $LFS setstripe -i 0 -c 1 $DIR/$tfile
- echo "set RPC size to 4MB"
+ local orig_mb=$(do_facet ost1 $LCTL get_param -n $brw_size | head -n 1)
+ if [ $(lustre_version_code ost1) -ge $(version_code 2.8.52) ]; then
+ [ $(lustre_version_code ost1) -ge $(version_code 2.9.52) ] &&
+ suffix="M"
+ if [[ $orig_mb -lt 16 ]]; then
+ save_lustre_params $osts "$brw_size" > $p
+ do_nodes $list $LCTL set_param -n $brw_size=16$suffix ||
+ error "set 16MB RPC size failed"
+
+ echo "remount client to enable new RPC size"
+ remount_client $MOUNT || error "remount_client failed"
+ fi
- $LCTL set_param -n osc.*.max_pages_per_rpc=4M osc.*.rpc_stats=0
- dd if=/dev/zero of=$DIR/$tfile bs=4M count=25
- cancel_lru_locks osc
- dd of=/dev/null if=$DIR/$tfile bs=4M count=25
+ test_101g_brw_size_test 16 || error "16MB RPC test failed"
+ # should be able to set brw_size=12, but no rpc_stats for that
+ test_101g_brw_size_test 8 || error "8MB RPC test failed"
+ fi
- # calculate 4 MiB RPCs
- rpcs=$($LCTL get_param 'osc.*.rpc_stats' |
- sed -n '/pages per rpc/,/^$/p' |
- awk 'BEGIN { sum = 0 }; /1024:/ { sum += $2 };
- END { print sum }')
- echo $rpcs RPCs
- [ "$rpcs" -eq 25 ] || error "not all RPCs are 4 MiB BRW rpcs"
+ test_101g_brw_size_test 4 || error "4MB RPC test failed"
- restore_lustre_params < $p
- remount_client $MOUNT || error "remount_client failed"
+ if [[ $orig_mb -lt 16 ]]; then
+ restore_lustre_params < $p
+ remount_client $MOUNT || error "remount_client restore failed"
+ fi
rm -f $p $DIR/$tfile
}
setfattr -x user.author1 $testfile ||
error "$testfile error deleting user.author1"
- getfattr -d -m user $testfile 2> /dev/null | grep "user.author1" &&
- error "$testfile did not delete trusted.name1 xattr"
-
- # b10667: setting lustre special xattr be silently discarded
echo "set lustre special xattr ..."
- setfattr -n "trusted.lov" -v "invalid value" $testfile ||
- error "$testfile allowed setting trusted.lov"
+ $LFS setstripe -c1 $testfile
+ local lovea=$(getfattr -n "trusted.lov" -e hex $testfile |
+ awk -F "=" '/trusted.lov/ { print $2 }' )
+ setfattr -n "trusted.lov" -v $lovea $testfile ||
+ error "$testfile doesn't ignore setting trusted.lov again"
+ setfattr -n "trusted.lov" -v "invalid_value" $testfile &&
+ error "$testfile allow setting invalid trusted.lov"
+ rm -f $testfile
}
run_test 102a "user xattr test =================================="
}
test_102n() { # LU-4101 mdt: protect internal xattrs
- local file0=$DIR/$tfile.0
- local file1=$DIR/$tfile.1
- local xattr0=$TMP/$tfile.0
- local xattr1=$TMP/$tfile.1
- local name
- local value
-
[ -z "$(which setfattr 2>/dev/null)" ] &&
skip "could not find setfattr" && return
-
if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.5.50) ]
then
skip "MDT < 2.5.50 allows setxattr on internal trusted xattrs"
return
fi
+ local file0=$DIR/$tfile.0
+ local file1=$DIR/$tfile.1
+ local xattr0=$TMP/$tfile.0
+ local xattr1=$TMP/$tfile.1
+ local namelist="lov lma lmv link fid version som hsm"
+ local name
+ local value
+
rm -rf $file0 $file1 $xattr0 $xattr1
touch $file0 $file1
# Get 'before' xattrs of $file1.
getfattr --absolute-names --dump --match=- $file1 > $xattr0
- for name in lov lma lmv link fid version som hsm; do
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.53) ] &&
+ namelist+=" lfsck_namespace"
+ for name in $namelist; do
# Try to copy xattr from $file0 to $file1.
value=$(getxattr $file0 trusted.$name 2> /dev/null)
# Try to set a garbage xattr.
value=0sVGhlIHF1aWNrIGJyb3duIGZveCBqdW1wcyBvdmVyIGl0c2VsZi4=
- setfattr --name=trusted.$name --value="$value" $file1 ||
- error "setxattr 'trusted.$name' failed"
+ if [[ x$name == "xlov" ]]; then
+ setfattr --name=trusted.lov --value="$value" $file1 &&
+ error "setxattr invalid 'trusted.lov' success"
+ else
+ setfattr --name=trusted.$name --value="$value" $file1 ||
+ error "setxattr invalid 'trusted.$name' failed"
+ fi
# Try to remove the xattr from $file1. We don't care if this
# appears to succeed or fail, we just don't want there to be
SAVE_UMASK=$(umask)
umask 0022
- cd $DIR
+ mkdir -p $DIR/$tdir
+ cd $DIR/$tdir
echo "performing cp ..."
run_acl_subtest cp || error "run_acl_subtest cp failed"
}
run_test 110 "filename length checking"
+#
+# Purpose: To verify dynamic thread (OSS) creation.
+#
test_115() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- OSTIO_pre=$(ps -e | grep ll_ost_io | awk '{ print $4 }'| sort -n |
- tail -1 | cut -c11-20)
- [ -z "$OSTIO_pre" ] && skip "no OSS threads" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
+
+ # Lustre does not stop service threads once they are started.
+ # Reset number of running threads to default.
+ stopall
+ setupall
+
+ local OSTIO_pre
+ local save_params="$TMP/sanity-$TESTNAME.parameters"
+
+ # Get ll_ost_io count before I/O
+ OSTIO_pre=$(do_facet ost1 \
+ "$LCTL get_param ost.OSS.ost_io.threads_started | cut -d= -f2")
+ # Exit if lustre is not running (ll_ost_io not running).
+ [ -z "$OSTIO_pre" ] && error "no OSS threads"
+
echo "Starting with $OSTIO_pre threads"
+ local thread_max=$((OSTIO_pre * 2))
+ local rpc_in_flight=$((thread_max * 2))
+ # Number of I/O Process proposed to be started.
+ local nfiles
+ local facets=$(get_facets OST)
- NUMTEST=20000
- NUMFREE=$(df -i -P $DIR | tail -n 1 | awk '{ print $4 }')
- [[ $NUMFREE -lt $NUMTEST ]] && NUMTEST=$(($NUMFREE - 1000))
- echo "$NUMTEST creates/unlinks"
- test_mkdir -p $DIR/$tdir
- createmany -o $DIR/$tdir/$tfile $NUMTEST
- unlinkmany $DIR/$tdir/$tfile $NUMTEST
+ save_lustre_params client \
+ "osc.*OST*.max_rpcs_in_flight" > $save_params
+ save_lustre_params $facets \
+ "ost.OSS.ost_io.threads_max" >> $save_params
+
+ # Set in_flight to $rpc_in_flight
+ $LCTL set_param osc.*OST*.max_rpcs_in_flight=$rpc_in_flight ||
+ error "Failed to set max_rpcs_in_flight to $rpc_in_flight"
+ nfiles=${rpc_in_flight}
+ # Set ost thread_max to $thread_max
+ do_facet ost1 \
+ "$LCTL set_param ost.OSS.ost_io.threads_max=$thread_max"
+
+ # 5 Minutes should be sufficient for max number of OSS
+ # threads(thread_max) to be created.
+ local timeout=300
+
+ # Start I/O.
+ local WTL=${WTL:-"$LUSTRE/tests/write_time_limit"}
+ mkdir -p $DIR/$tdir
+ for i in $(seq $nfiles); do
+ local file=$DIR/$tdir/${tfile}-$i
+ $LFS setstripe -c -1 -i 0 $file
+ ($WTL $file $timeout)&
+ done
- OSTIO_post=$(ps -e | grep ll_ost_io | awk '{ print $4 }' | sort -n |
- tail -1 | cut -c11-20)
+ # I/O Started - Wait for thread_started to reach thread_max or report
+ # error if thread_started is more than thread_max.
+ echo "Waiting for thread_started to reach thread_max"
+ local thread_started=0
+ local end_time=$((SECONDS + timeout))
+
+ while [ $SECONDS -le $end_time ] ; do
+ echo -n "."
+ # Get ost i/o thread_started count.
+ thread_started=$(do_facet ost1 \
+ "$LCTL get_param \
+ ost.OSS.ost_io.threads_started | cut -d= -f2")
+ # Break out if thread_started is equal/greater than thread_max
+ if [[ $thread_started -ge $thread_max ]]; then
+ echo ll_ost_io thread_started $thread_started, \
+ equal/greater than thread_max $thread_max
+ break
+ fi
+ sleep 1
+ done
+
+ # Cleanup - We have the numbers, Kill i/o jobs if running.
+ jobcount=($(jobs -p))
+ for i in $(seq 0 $((${#jobcount[@]}-1)))
+ do
+ kill -9 ${jobcount[$i]}
+ if [ $? -ne 0 ] ; then
+ echo Warning: \
+ Failed to Kill \'WTL\(I/O\)\' with pid ${jobcount[$i]}
+ fi
+ done
- # don't return an error
- [ $OSTIO_post == $OSTIO_pre ] && echo \
- "WARNING: No new ll_ost_io threads were created ($OSTIO_pre)" &&
- echo "This may be fine, depending on what ran before this test" &&
- echo "and how fast this system is." && return
+ # Cleanup files left by WTL binary.
+ for i in $(seq $nfiles); do
+ local file=$DIR/$tdir/${tfile}-$i
+ rm -rf $file
+ if [ $? -ne 0 ] ; then
+ echo "Warning: Failed to delete file $file"
+ fi
+ done
- echo "Started with $OSTIO_pre threads, ended with $OSTIO_post"
+ restore_lustre_params <$save_params
+ rm -f $save_params || echo "Warning: delete file '$save_params' failed"
+
+ # Error out if no new thread has started or Thread started is greater
+ # than thread max.
+ if [[ $thread_started -le $OSTIO_pre ||
+ $thread_started -gt $thread_max ]]; then
+ error "ll_ost_io: thread_started $thread_started" \
+ "OSTIO_pre $OSTIO_pre, thread_max $thread_max." \
+ "No new thread started or thread started greater " \
+ "than thread_max."
+ fi
}
run_test 115 "verify dynamic thread creation===================="
free_min_max () {
wait_delete_completed
AVAIL=($(lctl get_param -n osc.*[oO][sS][cC]-[^M]*.kbytesavail))
- echo OST kbytes available: ${AVAIL[@]}
- MAXI=0; MAXV=${AVAIL[0]}
- MINI=0; MINV=${AVAIL[0]}
+ echo "OST kbytes available: ${AVAIL[@]}"
+ MAXV=${AVAIL[0]}
+ MAXI=0
+ MINV=${AVAIL[0]}
+ MINI=0
for ((i = 0; i < ${#AVAIL[@]}; i++)); do
#echo OST $i: ${AVAIL[i]}kb
if [[ ${AVAIL[i]} -gt $MAXV ]]; then
- MAXV=${AVAIL[i]}; MAXI=$i
+ MAXV=${AVAIL[i]}
+ MAXI=$i
fi
if [[ ${AVAIL[i]} -lt $MINV ]]; then
- MINV=${AVAIL[i]}; MINI=$i
+ MINV=${AVAIL[i]}
+ MINI=$i
fi
done
- echo Min free space: OST $MINI: $MINV
- echo Max free space: OST $MAXI: $MAXV
+ echo "Min free space: OST $MINI: $MINV"
+ echo "Max free space: OST $MAXI: $MAXV"
}
test_116a() { # was previously test_116()
# Check if we need to generate uneven OSTs
test_mkdir -p $DIR/$tdir/OST${MINI}
- local FILL=$(($MINV / 4))
- local DIFF=$(($MAXV - $MINV))
- local DIFF2=$(($DIFF * 100 / $MINV))
+ local FILL=$((MINV / 4))
+ local DIFF=$((MAXV - MINV))
+ local DIFF2=$((DIFF * 100 / MINV))
local threshold=$(do_facet $SINGLEMDS \
lctl get_param -n *.*MDT0000-mdtlov.qos_threshold_rr | head -n1)
else
# generate uneven OSTs. Write 2% over the QOS threshold value
echo "no"
- DIFF=$(($threshold - $DIFF2 + 2))
- DIFF2=$(( ($MINV * $DIFF)/100 ))
- echo "Fill ${DIFF}% remaining space in OST${MINI} with ${DIFF2}KB"
+ DIFF=$((threshold - DIFF2 + 2))
+ DIFF2=$((MINV * DIFF / 100))
+ echo "Fill $DIFF% remaining space in OST$MINI with ${DIFF2}KB"
$SETSTRIPE -i $MINI -c 1 $DIR/$tdir/OST${MINI} ||
error "setstripe failed"
- DIFF=$(($DIFF2 / 2048))
+ DIFF=$((DIFF2 / 2048))
i=0
while [ $i -lt $DIFF ]; do
- i=$(($i + 1))
+ i=$((i + 1))
dd if=/dev/zero of=$DIR/$tdir/OST${MINI}/$tfile-$i \
bs=2M count=1 2>/dev/null
echo -n .
free_min_max
fi
- DIFF=$(($MAXV - $MINV))
- DIFF2=$(($DIFF * 100 / $MINV))
- echo -n "diff=${DIFF}=${DIFF2}% must be > ${threshold}% for QOS mode..."
- if [[ $DIFF2 -gt $threshold ]]; then
+ DIFF=$((MAXV - MINV))
+ DIFF2=$((DIFF * 100 / MINV))
+ echo -n "diff=$DIFF=$DIFF2% must be > $threshold% for QOS mode..."
+ if [ $DIFF2 -gt $threshold ]; then
echo "ok"
else
echo "failed - QOS mode won't be used"
return
fi
- MINI1=$MINI; MINV1=$MINV
- MAXI1=$MAXI; MAXV1=$MAXV
+ MINI1=$MINI
+ MINV1=$MINV
+ MAXI1=$MAXI
+ MAXV1=$MAXV
# now fill using QOS
$SETSTRIPE -c 1 $DIR/$tdir
- FILL=$(($FILL / 200))
+ FILL=$((FILL / 200))
if [ $FILL -gt 600 ]; then
FILL=600
fi
echo "Note: free space may not be updated, so measurements might be off"
free_min_max
- DIFF2=$(($MAXV - $MINV))
+ DIFF2=$((MAXV - MINV))
echo "free space delta: orig $DIFF final $DIFF2"
[ $DIFF2 -gt $DIFF ] && echo "delta got worse!"
- DIFF=$(($MINV1 - ${AVAIL[$MINI1]}))
+ DIFF=$((MINV1 - ${AVAIL[$MINI1]}))
echo "Wrote ${DIFF}KB to smaller OST $MINI1"
- DIFF2=$(($MAXV1 - ${AVAIL[$MAXI1]}))
+ DIFF2=$((MAXV1 - ${AVAIL[$MAXI1]}))
echo "Wrote ${DIFF2}KB to larger OST $MAXI1"
if [[ $DIFF -gt 0 ]]; then
- FILL=$(($DIFF2 * 100 / $DIFF - 100))
+ FILL=$((DIFF2 * 100 / DIFF - 100))
echo "Wrote ${FILL}% more data to larger OST $MAXI1"
fi
# Figure out which files were written where
UUID=$(lctl get_param -n lov.${FSNAME}-clilov-*.target_obd |
- awk '/'$MINI1': / {print $2; exit}')
+ awk '/'$MINI1': / {print $2; exit}')
echo $UUID
MINC=$($GETSTRIPE --ost $UUID $DIR/$tdir | grep $DIR | wc -l)
echo "$MINC files created on smaller OST $MINI1"
UUID=$(lctl get_param -n lov.${FSNAME}-clilov-*.target_obd |
- awk '/'$MAXI1': / {print $2; exit}')
+ awk '/'$MAXI1': / {print $2; exit}')
echo $UUID
MAXC=$($GETSTRIPE --ost $UUID $DIR/$tdir | grep $DIR | wc -l)
echo "$MAXC files created on larger OST $MAXI1"
if [[ $MINC -gt 0 ]]; then
- FILL=$(($MAXC * 100 / $MINC - 100))
+ FILL=$((MAXC * 100 / MINC - 100))
echo "Wrote ${FILL}% more files to larger OST $MAXI1"
fi
[[ $MAXC -gt $MINC ]] ||
stat $DIR/$tdir $DIR/$tdir/f1 > /dev/null
# XXX client can not do early lock cancel of OST lock
# during unlink (LU-4206), so cancel osc lock now.
+ sleep 2
cancel_lru_locks osc
can1=$(do_facet $SINGLEMDS \
"$LCTL get_param -n ldlm.services.ldlm_canceld.stats" |
stat $DIR/$tdir/d1 $DIR/$tdir/d2 $DIR/$tdir/d1/f1 $DIR/$tdir/d2/f2 > /dev/null
# XXX client can not do early lock cancel of OST lock
# during rename (LU-4206), so cancel osc lock now.
+ sleep 2
cancel_lru_locks osc
can1=$(do_facet $SINGLEMDS \
"$LCTL get_param -n ldlm.services.ldlm_canceld.stats" |
NR=$(($(default_lru_size)*20))
if [[ $NR -gt $LIMIT ]]; then
- log "Limit lock number by $LIMIT locks"
- NR=$LIMIT
- fi
- lru_resize_disable mdc
- test_mkdir -p $DIR/$tdir/disable_lru_resize ||
+ log "Limit lock number by $LIMIT locks"
+ NR=$LIMIT
+ fi
+
+ IFree=$(mdsrate_inodes_available)
+ if [ $IFree -lt $NR ]; then
+ log "Limit lock number by $IFree inodes"
+ NR=$IFree
+ fi
+
+ lru_resize_disable mdc
+ test_mkdir -p $DIR/$tdir/disable_lru_resize ||
error "failed to create $DIR/$tdir/disable_lru_resize"
createmany -o $DIR/$tdir/disable_lru_resize/f $NR
local canondev
local node
- local LDPROC=/proc/fs/ldiskfs
+ local ldproc=/proc/fs/ldiskfs
local facets=$(get_facets MDS)
for facet in ${facets//,/ }; do
canondev=$(ldiskfs_canon \
*.$(convert_facet2label $facet).mntdev $facet)
- do_facet $facet "test -e $LDPROC/$canondev/max_dir_size" ||
- LDPROC=/sys/fs/ldiskfs
- do_facet $facet "echo $1 >$LDPROC/$canondev/max_dir_size"
- do_facet $facet "test -e $LDPROC/$canondev/warning_dir_size" ||
- LDPROC=/sys/fs/ldiskfs
- do_facet $facet "echo $2 >$LDPROC/$canondev/warning_dir_size"
+ do_facet $facet "test -e $ldproc/$canondev/max_dir_size" ||
+ ldproc=/sys/fs/ldiskfs
+ do_facet $facet "echo $1 >$ldproc/$canondev/max_dir_size"
+ do_facet $facet "echo $2 >$ldproc/$canondev/warning_dir_size"
done
}
}
test_129() {
+ [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.5.56) ]] ||
+ { skip "Need MDS version with at least 2.5.56"; return 0; }
+
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
if [ "$(facet_fstype $SINGLEMDS)" != ldiskfs ]; then
skip "Only applicable to ldiskfs-based MDTs"
remote_mds_nodsh && skip "remote MDS with nodsh" && return
local ENOSPC=28
local EFBIG=27
- local has_warning=0
+ local has_warning=false
rm -rf $DIR/$tdir
mkdir -p $DIR/$tdir
# block size of mds1
- local MDT_DEV=$(mdsdevname ${SINGLEMDS//mds/})
- local MDSBLOCKSIZE=$($LCTL get_param -n mdc.*MDT0000*.blocksize)
- local MAX=$((MDSBLOCKSIZE * 5))
- set_dir_limits $MAX $MAX
- local I=$(stat -c%s "$DIR/$tdir")
- local J=0
- while [[ $I -le $MAX ]]; do
- $MULTIOP $DIR/$tdir/$J Oc
+ local maxsize=$(($($LCTL get_param -n mdc.*MDT0000*.blocksize) * 5))
+ set_dir_limits $maxsize $maxsize
+ local dirsize=$(stat -c%s "$DIR/$tdir")
+ local nfiles=0
+ while [[ $dirsize -le $maxsize ]]; do
+ $MULTIOP $DIR/$tdir/file_base_$nfiles Oc
rc=$?
- if [ $has_warning -eq 0 ]; then
- check_mds_dmesg '"is approaching"' &&
- has_warning=1
+ if ! $has_warning; then
+ check_mds_dmesg '"is approaching"' && has_warning=true
fi
- #check two errors ENOSPC for new version of ext4 max_dir_size patch
- #mainline kernel commit df981d03eeff7971ac7e6ff37000bfa702327ef1
- #and EFBIG for previous versions
+ # check two errors:
+ # ENOSPC for new ext4 max_dir_size (kernel commit df981d03ee)
+ # EFBIG for previous versions included in ldiskfs series
if [ $rc -eq $EFBIG -o $rc -eq $ENOSPC ]; then
set_dir_limits 0 0
echo "return code $rc received as expected"
- createmany -o $DIR/$tdir/$J_file_ 1000 ||
+ createmany -o $DIR/$tdir/file_extra_$nfiles. 5 ||
error_exit "create failed w/o dir size limit"
check_mds_dmesg '"has reached"' ||
- error_exit "has reached message should be output"
+ error_exit "reached message should be output"
[ $has_warning -eq 0 ] &&
error_exit "warning message should be output"
- I=$(stat -c%s "$DIR/$tdir")
+ dirsize=$(stat -c%s "$DIR/$tdir")
- if [ $(lustre_version_code $SINGLEMDS) -lt \
- $(version_code 2.4.51) ]
- then
- [[ $I -eq $MAX ]] && return 0
- else
- [[ $I -gt $MAX ]] && return 0
- fi
- error_exit "current dir size $I, previous limit $MAX"
+ [[ $dirsize -ge $maxsize ]] && return 0
+ error_exit "current dir size $dirsize, " \
+ "previous limit $maxsize"
elif [ $rc -ne 0 ]; then
set_dir_limits 0 0
- error_exit "return code $rc received instead of expected " \
- "$EFBIG or $ENOSPC, files in dir $I"
+ error_exit "return $rc received instead of expected " \
+ "$EFBIG or $ENOSPC, files in dir $dirsize"
fi
- J=$((J+1))
- I=$(stat -c%s "$DIR/$tdir")
+ nfiles=$((nfiles + 1))
+ dirsize=$(stat -c%s "$DIR/$tdir")
done
set_dir_limits 0 0
- error "exceeded dir size limit $MAX($MDSCOUNT) : $I bytes"
+ error "exceeded dir size limit $maxsize($MDSCOUNT) : $dirsize bytes"
}
run_test 129 "test directory size limit ========================"
# Test for writev/readv
test_131a() {
- rwv -f $DIR/$tfile -w -n 3 524288 1048576 1572864 || \
- error "writev test failed"
- rwv -f $DIR/$tfile -r -v -n 2 1572864 1048576 || \
- error "readv failed"
+ rwv -f $DIR/$tfile -w -n 3 524288 1048576 1572864 ||
+ error "writev test failed"
+ rwv -f $DIR/$tfile -r -v -n 2 1572864 1048576 ||
+ error "readv failed"
rm -f $DIR/$tfile
}
run_test 131a "test iov's crossing stripe boundary for writev/readv"
test_131b() {
- rwv -f $DIR/$tfile -w -a -n 3 524288 1048576 1572864 || \
- error "append writev test failed"
- rwv -f $DIR/$tfile -w -a -n 2 1572864 1048576 || \
- error "append writev test failed"
+ local fsize=$((524288 + 1048576 + 1572864))
+ rwv -f $DIR/$tfile -w -a -n 3 524288 1048576 1572864 &&
+ $CHECKSTAT -t file $DIR/$tfile -s $fsize ||
+ error "append writev test failed"
+
+ ((fsize += 1572864 + 1048576))
+ rwv -f $DIR/$tfile -w -a -n 2 1572864 1048576 &&
+ $CHECKSTAT -t file $DIR/$tfile -s $fsize ||
+ error "append writev test failed"
rm -f $DIR/$tfile
}
run_test 131b "test append writev"
run_test 131e "test read hitting hole"
check_stats() {
+ local facet=$1
+ local op=$2
+ local want=${3:-0}
local res
- local count
- case $1 in
- $SINGLEMDS) res=`do_facet $SINGLEMDS $LCTL get_param mdt.$FSNAME-MDT0000.md_stats | grep "$2"`
+
+ case $facet in
+ mds*) res=$(do_facet $facet \
+ $LCTL get_param mdt.$FSNAME-MDT0000.md_stats | grep "$op")
;;
- ost) res=`do_facet ost1 $LCTL get_param obdfilter.$FSNAME-OST0000.stats | grep "$2"`
+ ost*) res=$(do_facet $facet \
+ $LCTL get_param obdfilter.$FSNAME-OST0000.stats | grep "$op")
;;
- *) error "Wrong argument $1" ;;
+ *) error "Wrong facet '$facet'" ;;
esac
echo $res
- [ -z "$res" ] && error "The counter for $2 on $1 was not incremented"
+ [ "$res" ] || error "The counter for $op on $facet was not incremented"
# if the argument $3 is zero, it means any stat increment is ok.
- if [[ $3 -gt 0 ]]; then
- count=$(echo $res | awk '{ print $2 }')
- [[ $count -ne $3 ]] &&
- error "The $2 counter on $1 is wrong - expected $3"
+ if [[ $want -gt 0 ]]; then
+ local count=$(echo $res | awk '{ print $2 }')
+ [[ $count -ne $want ]] &&
+ error "The $op counter on $facet is $count, not $want"
fi
}
dd if=/dev/zero of=${testdir}/${tfile} conv=notrunc bs=512k count=1 || error "dd failed"
sync
cancel_lru_locks osc
- check_stats ost "write" 1
+ check_stats ost1 "write" 1
dd if=${testdir}/${tfile} of=/dev/null bs=1k count=1 || error "dd failed"
- check_stats ost "read" 1
+ check_stats ost1 "read" 1
> ${testdir}/${tfile} || error "truncate failed"
- check_stats ost "punch" 1
+ check_stats ost1 "punch" 1
rm -f ${testdir}/${tfile} || error "file remove failed"
wait_delete_completed
- check_stats ost "destroy" 1
+ check_stats ost1 "destroy" 1
rm -rf $DIR/${tdir}
}
}
run_test 133e "Verifying OST {read,write}_bytes nid stats ================="
-proc_dirs=""
-for dir in /proc/fs/lustre/ /proc/sys/lnet/ /proc/sys/lustre/ \
- /sys/fs/lustre/ /sys/fs/lnet/ /sys/kernel/debug/lnet/ \
- /sys/kernel/debug/lustre/; do
- [[ -d $dir ]] && proc_dirs+=" $dir"
-done
+proc_regexp="/{proc,sys}/{fs,sys,kernel/debug}/{lustre,lnet}/"
test_133f() {
remote_mds_nodsh && skip "remote MDS with nodsh" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
# First without trusting modes.
+ local proc_dirs=$(eval \ls -d $proc_regexp 2>/dev/null)
+ echo "proc_dirs='$proc_dirs'"
+ [ -n "$proc_dirs" ] || error "no proc_dirs on $HOSTNAME"
find $proc_dirs -exec cat '{}' \; &> /dev/null
# Second verifying readability.
# eventually, this can also be replaced with "lctl get_param -R",
# but not until that option is always available on the server
local facet
- for facet in $SINGLEMDS ost1; do
- do_facet $facet find $proc_dirs \
+ for facet in mds1 ost1; do
+ local facet_proc_dirs=$(do_facet $facet \
+ \\\ls -d $proc_regexp 2>/dev/null)
+ echo "${facet}_proc_dirs='$facet_proc_dirs'"
+ [ -z "$facet_proc_dirs" ] && error "no proc_dirs on $facet"
+ do_facet $facet find $facet_proc_dirs \
! -name req_history \
-exec cat '{}' \\\; &> /dev/null
- do_facet $facet find $proc_dirs \
+ do_facet $facet find $facet_proc_dirs \
! -name req_history \
-type f \
-exec cat '{}' \\\; &> /dev/null ||
remote_mds_nodsh && skip "remote MDS with nodsh" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
# Second verifying writability.
+ local proc_dirs=$(eval \ls -d $proc_regexp 2>/dev/null)
+ echo "proc_dirs='$proc_dirs'"
+ [ -n "$proc_dirs" ] || error "no proc_dirs on $HOSTNAME"
find $proc_dirs \
-type f \
-not -name force_lbug \
-exec badarea_io '{}' \; &> /dev/null ||
error "find $proc_dirs failed"
- [ $(lustre_version_code $SINGLEMDS) -le $(version_code 2.5.54) ] &&
- skip "Too old lustre on MDS" && return
-
- [ $(lustre_version_code ost1) -le $(version_code 2.5.54) ] &&
- skip "Too old lustre on ost1" && return
-
local facet
- for facet in $SINGLEMDS ost1; do
- do_facet $facet find $proc_dirs \
+ for facet in mds1 ost1; do
+ [ $(lustre_version_code $facet) -le $(version_code 2.5.54) ] &&
+ skip "Too old lustre on $facet" && continue
+ local facet_proc_dirs=$(do_facet $facet \
+ \\\ls -d $proc_regexp 2> /dev/null)
+ echo "${facet}_proc_dirs='$facet_proc_dirs'"
+ [ -z "$facet_proc_dirs" ] && error "no proc_dirs on $facet"
+ do_facet $facet find $facet_proc_dirs \
-type f \
-not -name force_lbug \
-not -name changelog_mask \
-exec badarea_io '{}' \\\; &> /dev/null ||
- error "$facet find $proc_dirs failed"
-
+ error "$facet find $facet_proc_dirs failed"
done
# remount the FS in case writes/reads /proc break the FS
}
run_test 133g "Check for Oopses on bad io area writes/reads in /proc"
+test_133h() {
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
+ [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.9.54) ]] &&
+ skip "Need MDS version at least 2.9.54" && return
+
+ local facet
+ for facet in client mds1 ost1; do
+ local facet_proc_dirs=$(do_facet $facet \
+ \\\ls -d $proc_regexp 2> /dev/null)
+ [ -z "$facet_proc_dirs" ] && error "no proc_dirs on $facet"
+ echo "${facet}_proc_dirs='$facet_proc_dirs'"
+ # Get the list of files that are missing the terminating newline
+ local missing=($(do_facet $facet \
+ find ${facet_proc_dirs} -type f \| \
+ while read F\; do \
+ awk -v FS='\v' -v RS='\v\v' \
+ "'END { if(NR>0 && \
+ \\\$NF !~ /.*\\\n\$/) \
+ print FILENAME}'" \
+ '\$F'\; \
+ done 2>/dev/null))
+ [ ${#missing[*]} -eq 0 ] ||
+ error "files do not end with newline: ${missing[*]}"
+ done
+}
+run_test 133h "Proc files should end with newlines"
+
test_134a() {
remote_mds_nodsh && skip "remote MDS with nodsh" && return
[[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.54) ]] &&
}
run_test 154A "lfs path2fid and fid2path basic checks"
+test_154B() {
+ [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.1) ]] &&
+ skip "Need MDS version at least 2.4.1" && return
+
+ mkdir -p $DIR/$tdir || error "mkdir $tdir failed"
+ touch $DIR/$tdir/$tfile || error "touch $DIR/$tdir/$tfile failed"
+ local linkea=$($LL_DECODE_LINKEA $DIR/$tdir/$tfile | grep 'pfid')
+ [ -z "$linkea" ] && error "decode linkea $DIR/$tdir/$tfile failed"
+
+ local name=$(echo $linkea | awk '/pfid/ {print $5}' | sed -e "s/'//g")
+ local PFID=$(echo $linkea | awk '/pfid/ {print $3}' | sed -e "s/,//g")
+
+ # check that we get the same pathname
+ echo "PFID: $PFID, name: $name"
+ local FOUND=$($LFS fid2path $MOUNT "$PFID")
+ [ -z "$FOUND" ] && error "fid2path unable to get $PFID path"
+ [ "$FOUND/$name" != "$DIR/$tdir/$tfile" ] &&
+ error "ll_decode_linkea has $FOUND/$name != $DIR/$tdir/$tfile"
+
+ rm -rf $DIR/$tdir || error "Can not delete directory $DIR/$tdir"
+}
+run_test 154B "verify the ll_decode_linkea tool"
+
test_154a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.51) ]] ||
}
run_test 160d "verify that changelog log catch the migrate event"
+test_160e() {
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+
+ # Create a user
+ CL_USER=$(do_facet $SINGLEMDS $LCTL --device $MDT0 \
+ changelog_register -n)
+ echo "Registered as changelog user $CL_USER"
+ trap cleanup_changelog EXIT
+
+ # Delete a future user (expect fail)
+ do_facet $SINGLEMDS $LCTL --device $MDT0 changelog_deregister cl77
+ local rc=$?
+
+ if [ $rc -eq 0 ]; then
+ error "Deleted non-existant user cl77"
+ elif [ $rc -ne 2 ]; then
+ error "changelog_deregister failed with $rc, " \
+ "expected 2 (ENOENT)"
+ fi
+
+ # Clear to a bad index (1 billion should be safe)
+ $LFS changelog_clear $MDT0 $CL_USER 1000000000
+ rc=$?
+
+ if [ $rc -eq 0 ]; then
+ error "Successfully cleared to invalid CL index"
+ elif [ $rc -ne 22 ]; then
+ error "changelog_clear failed with $rc, expected 22 (EINVAL)"
+ fi
+}
+run_test 160e "changelog negative testing"
+
test_161a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p -c1 $DIR/$tdir
}
run_test 161c "check CL_RENME[UNLINK] changelog record flags"
+test_161d() {
+ local user
+ local pid
+ local fid
+
+ # cleanup previous run
+ rm -rf $DIR/$tdir/$tfile
+
+ user=$(do_facet $SINGLEMDS $LCTL --device $MDT0 \
+ changelog_register -n)
+ [[ $? -eq 0 ]] || error "changelog_register failed"
+
+ # work in a standalone dir to avoid locking on $DIR/$MOUNT to
+ # interfer with $MOUNT/.lustre/fid/ access
+ mkdir $DIR/$tdir
+ [[ $? -eq 0 ]] || error "mkdir failed"
+
+ #define OBD_FAIL_LLITE_CREATE_NODE_PAUSE 0x140c | OBD_FAIL_ONCE
+ $LCTL set_param fail_loc=0x8000140c
+ # 5s pause
+ $LCTL set_param fail_val=5
+
+ # create file
+ echo foofoo > $DIR/$tdir/$tfile &
+ pid=$!
+
+ # wait for create to be delayed
+ sleep 2
+
+ ps -p $pid
+ [[ $? -eq 0 ]] || error "create should be blocked"
+
+ local tempfile=$(mktemp)
+ fid=$(changelog_extract_field $MDT0 "CREAT" "$tfile" "t=")
+ cat $MOUNT/.lustre/fid/$fid 2>/dev/null >$tempfile || error "cat failed"
+ # some delay may occur during ChangeLog publishing and file read just
+ # above, that could allow file write to happen finally
+ [[ -s $tempfile ]] && echo "file should be empty"
+
+ $LCTL set_param fail_loc=0
+
+ wait $pid
+ [[ $? -eq 0 ]] || error "create failed"
+
+ $LFS changelog_clear $MDT0 $user 0
+ do_facet $SINGLEMDS $LCTL --device $MDT0 changelog_deregister $user
+}
+run_test 161d "create with concurrent .lustre/fid access"
+
check_path() {
local expected=$1
shift
local rc=0
local rmmod_remote=0
- do_facet ost1 "lsmod | grep -q obdecho || " \
- "{ insmod ${LUSTRE}/obdecho/obdecho.ko || " \
- "modprobe obdecho; }" && rmmod_remote=1
+ do_rpc_nodes $(facet_active_host ost1) load_module obdecho/obdecho &&
+ rmmod_remote=true || error "failed to load module obdecho"
target=$(do_facet ost1 $LCTL dl | awk '/obdfilter/ {print $4;exit}')
[[ -n $target ]] && { obdecho_test $target ost1 || rc=1; }
- [ $rmmod_remote -eq 1 ] && do_facet ost1 "rmmod obdecho"
+ $rmmod_remote && do_facet ost1 "rmmod obdecho"
return $rc
}
run_test 180b "test obdecho directly on obdfilter"
error "create $file2 failed"
$OPENFILE -f O_CREAT:O_LOV_DELAY_CREATE $file3 ||
error "create $file3 failed"
- lovea1=$($LFS getstripe $file1 | sed 1d)
+ lovea1=$(get_layout_param $file1)
$LFS swap_layouts $file2 $file3 ||
error "swap $file2 $file3 layouts failed"
$LFS swap_layouts $file1 $file2 ||
error "swap $file1 $file2 layouts failed"
- lovea2=$($LFS getstripe $file2 | sed 1d)
+ lovea2=$(get_layout_param $file2)
+ echo "$lovea1"
+ echo "$lovea2"
[ "$lovea1" == "$lovea2" ] || error "lovea $lovea1 != $lovea2"
lovea1=$(getfattr -n trusted.lov $file1 | grep ^trusted)
break
done
- cleanup_pools
+ destroy_test_pools
return $rc
}
run_test 200 "OST pools"
check_default_stripe_attr() {
ACTUAL=$($GETSTRIPE $* $DIR/$tdir)
case $1 in
- --stripe-count|--count)
+ --stripe-count|-c)
[ -n "$2" ] && EXPECTED=0 || EXPECTED=$(default_attr count);;
- --stripe-size|--size)
+ --stripe-size|-S)
[ -n "$2" ] && EXPECTED=0 || EXPECTED=$(default_attr size);;
- --stripe-index|--index)
+ --stripe-index|-i)
EXPECTED=-1;;
*)
error "unknown getstripe attr '$1'"
}
test_205() { # Job stats
+ [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.7.1) ]] ||
+ { skip "Need MDS version with at least 2.7.1"; return 0; }
+
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mgs_nodsh && skip "remote MGS with nodsh" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
cmd="mv -f $DIR/$tfile $DIR/$tdir.rename"
verify_jobstats "$cmd" "$SINGLEMDS"
# jobstats expiry - sleep until old stats should be expired
- local left=$((interval_new + 2 - (SECONDS - start)))
- [ $left -ge 0 ] && echo "sleep $left for expiry" && sleep $((left + 1))
+ local left=$((interval_new + 5 - (SECONDS - start)))
+ [ $left -ge 0 ] && wait_update_facet $SINGLEMDS \
+ "lctl get_param *.*.job_stats | grep -c 'job_id.*mkdir'" \
+ "0" $left
cmd="mkdir $DIR/$tdir.expire"
verify_jobstats "$cmd" "$SINGLEMDS"
[ $(do_facet $SINGLEMDS lctl get_param *.*.job_stats |
"ldlm.namespaces.filter-*.contended_locks" >> $p
save_lustre_params $facets \
"ldlm.namespaces.filter-*.contention_seconds" >> $p
- clear_osc_stats
+ clear_stats osc.*.osc_stats
- # agressive lockless i/o settings
- for node in $(osts_nodes); do
- do_node $node 'lctl set_param -n ldlm.namespaces.filter-*.max_nolock_bytes 2000000; lctl set_param -n ldlm.namespaces.filter-*.contended_locks 0; lctl set_param -n ldlm.namespaces.filter-*.contention_seconds 60'
- done
- lctl set_param -n osc.*.contention_seconds 60
+ # agressive lockless i/o settings
+ do_nodes $(comma_list $(osts_nodes)) \
+ "lctl set_param -n ldlm.namespaces.*.max_nolock_bytes=2000000 \
+ ldlm.namespaces.filter-*.contended_locks=0 \
+ ldlm.namespaces.filter-*.contention_seconds=60"
+ lctl set_param -n osc.*.contention_seconds=60
- $DIRECTIO write $DIR/$tfile 0 10 4096
- $CHECKSTAT -s 40960 $DIR/$tfile
+ $DIRECTIO write $DIR/$tfile 0 10 4096
+ $CHECKSTAT -s 40960 $DIR/$tfile
- # disable lockless i/o
- for node in $(osts_nodes); do
- do_node $node 'lctl set_param -n ldlm.namespaces.filter-*.max_nolock_bytes 0; lctl set_param -n ldlm.namespaces.filter-*.contended_locks 32; lctl set_param -n ldlm.namespaces.filter-*.contention_seconds 0'
- done
- lctl set_param -n osc.*.contention_seconds 0
- clear_osc_stats
+ # disable lockless i/o
+ do_nodes $(comma_list $(osts_nodes)) \
+ "lctl set_param -n ldlm.namespaces.filter-*.max_nolock_bytes=0 \
+ ldlm.namespaces.filter-*.contended_locks=32 \
+ ldlm.namespaces.filter-*.contention_seconds=0"
+ lctl set_param -n osc.*.contention_seconds=0
+ clear_stats osc.*.osc_stats
- dd if=/dev/zero of=$DIR/$tfile count=0
- $CHECKSTAT -s 0 $DIR/$tfile
+ dd if=/dev/zero of=$DIR/$tfile count=0
+ $CHECKSTAT -s 0 $DIR/$tfile
- restore_lustre_params <$p
- rm -f $p
- rm $DIR/$tfile
+ restore_lustre_params <$p
+ rm -f $p
+ rm $DIR/$tfile
}
-run_test 216 "check lockless direct write works and updates file size and kms correctly"
+run_test 216 "check lockless direct write updates file size and kms correctly"
test_217() { # bug 22430
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
for node in $(nodes_list); do
nid=$(host_nids_address $node $NETTYPE)
if [[ $nid = *-* ]] ; then
- echo "lctl ping $nid@$NETTYPE"
- lctl ping $nid@$NETTYPE
+ echo "lctl ping $(h2nettype $nid)"
+ lctl ping $(h2nettype $nid)
else
echo "skipping $node (no hyphen detected)"
fi
do_facet ost$((OSTIDX + 1)) lctl set_param fail_val=-1
#define OBD_FAIL_OST_ENOINO 0x229
do_facet ost$((OSTIDX + 1)) lctl set_param fail_loc=0x229
- do_facet mgs $LCTL pool_new $FSNAME.$TESTNAME || return 1
+ create_pool $FSNAME.$TESTNAME || return 1
do_facet mgs $LCTL pool_add $FSNAME.$TESTNAME $OST || return 2
$SETSTRIPE $DIR/$tdir -i $OSTIDX -c 1 -p $FSNAME.$TESTNAME
# is the same across all OSCs
local max_pages=$($LCTL get_param -n osc.*.max_pages_per_rpc | head -n1)
local bulk_size=$((max_pages * 4096))
+ local brw_size=$(do_facet ost1 $LCTL get_param -n obdfilter.*.brw_size |
+ head -n 1)
mkdir -p $DIR/$tdir
+ $LFS setstripe -S ${brw_size}M $DIR/$tdir ||
+ error "failed to set stripe with -S ${brw_size}M option"
# clear the OSC stats
$LCTL set_param osc.*.stats=0 &>/dev/null
done
}
-test_241() {
+test_241a() { # was test_241
dd if=/dev/zero of=$DIR/$tfile count=1 bs=40960
ls -la $DIR/$tfile
cancel_lru_locks osc
test_241_dio 1000
wait $PID
}
-run_test 241 "bio vs dio"
+run_test 241a "bio vs dio"
test_241b() {
dd if=/dev/zero of=$DIR/$tfile count=1 bs=40960
remote_mds_nodsh && skip "remote MDS with nodsh" && return
remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- local ost_name=$($LFS osts | grep ${ostidx}": " | \
- awk '{print $2}' | sed -e 's/_UUID$//')
+ local ost_name=$($LFS osts |
+ sed -n 's/^'$ostidx': \(.*\)_UUID .*/\1/p')
# on the mdt's osc
local mdtosc_proc1=$(get_mdtosc_proc_path $SINGLEMDS $ost_name)
do_facet $SINGLEMDS $LCTL get_param -n \
osp.$mdtosc_proc1.reserved_mb_low)
echo "prev high watermark $last_wm_h, prev low watermark $last_wm_l"
- do_facet mgs $LCTL pool_new $FSNAME.$TESTNAME ||
- error "Pool creation failed"
+ create_pool $FSNAME.$TESTNAME || error "Pool creation failed"
do_facet mgs $LCTL pool_add $FSNAME.$TESTNAME $ost_name ||
error "Adding $ost_name to pool failed"
return 1
}
+percent() {
+ bc <<<"scale=2; ($1 - $2) * 100 / $2"
+}
+
+# run a random read IO workload
+# usage: random_read_iops <filename> <filesize> <iosize>
+random_read_iops() {
+ local file=$1
+ local fsize=$2
+ local iosize=${3:-4096}
+
+ $READS -f $file -s $fsize -b $iosize -n $((fsize / iosize)) -t 60 |
+ sed -e '/^$/d' -e 's#.*s, ##' -e 's#MB/s##'
+}
+
+drop_file_oss_cache() {
+ local file="$1"
+ local nodes="$2"
+
+ $LFS ladvise -a dontneed $file 2>/dev/null ||
+ do_nodes $nodes "echo 3 > /proc/sys/vm/drop_caches"
+}
+
ladvise_willread_performance()
{
local repeat=10
+ local average_origin=0
local average_cache=0
local average_ladvise=0
for ((i = 1; i <= $repeat; i++)); do
echo "Iter $i/$repeat: reading without willread hint"
cancel_lru_locks osc
- do_nodes $(comma_list $(osts_nodes)) \
- "echo 3 > /proc/sys/vm/drop_caches"
- local speed_origin=$($READS -f $DIR/$tfile -s $size \
- -b 4096 -n $((size / 4096)) -t 60 |
- sed -e '/^$/d' -e 's#.*s, ##' -e 's#MB/s##')
+ drop_file_oss_cache $DIR/$tfile $(comma_list $(osts_nodes))
+ local speed_origin=$(random_read_iops $DIR/$tfile $size)
+ echo "Iter $i/$repeat: uncached speed: $speed_origin"
+ average_origin=$(bc <<<"$average_origin + $speed_origin")
- echo "Iter $i/$repeat: Reading again without willread hint"
cancel_lru_locks osc
- local speed_cache=$($READS -f $DIR/$tfile -s $size \
- -b 4096 -n $((size / 4096)) -t 60 |
- sed -e '/^$/d' -e 's#.*s, ##' -e 's#MB/s##')
+ local speed_cache=$(random_read_iops $DIR/$tfile $size)
+ echo "Iter $i/$repeat: OSS cache speed: $speed_cache"
+ average_cache=$(bc <<<"$average_cache + $speed_cache")
- echo "Iter $i/$repeat: reading with willread hint"
cancel_lru_locks osc
- do_nodes $(comma_list $(osts_nodes)) \
- "echo 3 > /proc/sys/vm/drop_caches"
- lfs ladvise -a willread $DIR/$tfile ||
- error "Ladvise failed"
- local speed_ladvise=$($READS -f $DIR/$tfile -s $size \
- -b 4096 -n $((size / 4096)) -t 60 |
- sed -e '/^$/d' -e 's#.*s, ##' -e 's#MB/s##')
-
- local cache_speedup=$(echo "scale=2; \
- ($speed_cache-$speed_origin)/$speed_origin*100" | bc)
- cache_speedup=$(echo ${cache_speedup%.*})
- echo "Iter $i/$repeat: cache speedup: $cache_speedup%"
- average_cache=$((average_cache + cache_speedup))
-
- local ladvise_speedup=$(echo "scale=2; \
- ($speed_ladvise-$speed_origin)/$speed_origin*100" | bc)
- ladvise_speedup=$(echo ${ladvise_speedup%.*})
- echo "Iter $i/$repeat: ladvise speedup: $ladvise_speedup%"
- average_ladvise=$((average_ladvise + ladvise_speedup))
- done
- average_cache=$((average_cache / repeat))
- average_ladvise=$((average_ladvise / repeat))
-
- if [ $average_cache -lt 20 ]; then
- echo "Speedup with cache is less than 20% ($average_cache%),"\
- "skipping check of speedup with willread:"\
- "$average_ladvise%"
+ drop_file_oss_cache $DIR/$tfile $(comma_list $(osts_nodes))
+ $LFS ladvise -a willread $DIR/$tfile || error "ladvise failed"
+ local speed_ladvise=$(random_read_iops $DIR/$tfile $size)
+ echo "Iter $i/$repeat: ladvise speed: $speed_ladvise"
+ average_ladvise=$(bc <<<"$average_ladvise + $speed_ladvise")
+ done
+ average_origin=$(bc <<<"scale=2; $average_origin / $repeat")
+ average_cache=$(bc <<<"scale=2; $average_cache / $repeat")
+ average_ladvise=$(bc <<<"scale=2; $average_ladvise / $repeat")
+
+ speedup_cache=$(percent $average_cache $average_origin)
+ speedup_ladvise=$(percent $average_ladvise $average_origin)
+
+ echo "Average uncached read: $average_origin"
+ echo "Average speedup with OSS cached read: " \
+ "$average_cache = +$speedup_cache%"
+ echo "Average speedup with ladvise willread: " \
+ "$average_ladvise = +$speedup_ladvise%"
+
+ local lowest_speedup=20
+ if [ ${average_cache%.*} -lt $lowest_speedup ]; then
+ echo "Speedup with OSS cached read less than $lowest_speedup%, "
+ "got $average_cache%. Skipping ladvise willread check."
return 0
fi
- local lowest_speedup=$((average_cache / 2))
- [ $average_ladvise -gt $lowest_speedup ] ||
+ # the test won't work on ZFS until it supports 'ladvise dontneed', but
+ # it is still good to run until then to exercise 'ladvise willread'
+ ! $LFS ladvise -a dontneed $DIR/$tfile &&
+ [ "$(facet_fstype ost1)" = "zfs" ] &&
+ echo "osd-zfs does not support dontneed or drop_caches" &&
+ return 0
+
+ lowest_speedup=$(bc <<<"scale=2; $average_cache / 2")
+ [ ${average_ladvise%.*} -gt $lowest_speedup ] ||
error_not_in_vm "Speedup with willread is less than " \
- "$lowest_speedup%, got $average_ladvise%"
- echo "Speedup with willread ladvise: $average_ladvise%"
- echo "Speedup with cache: $average_cache%"
+ "$lowest_speedup%, got $average_ladvise%"
}
test_255a() {
+ [ $(lustre_version_code ost1) -lt $(version_code 2.8.54) ] &&
+ skip "lustre < 2.8.54 does not support ladvise " && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
+
lfs setstripe -c -1 -i 0 $DIR/$tfile || error "$tfile failed"
ladvise_no_type willread $DIR/$tfile &&
ladvise_no_ioctl $DIR/$tfile &&
skip "ladvise ioctl is not supported" && return
- [ $(lustre_version_code ost1) -lt $(version_code 2.8.54) ] &&
- skip "lustre < 2.8.54 does not support ladvise " && return
-
local size_mb=100
local size=$((size_mb * 1048576))
dd if=/dev/zero of=$DIR/$tfile bs=1048576 count=$size_mb ||
}
test_255b() {
- lfs setstripe -c -1 -i 0 $DIR/$tfile
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
+
+ lfs setstripe -c 1 -i 0 $DIR/$tfile
ladvise_no_type dontneed $DIR/$tfile &&
skip "dontneed ladvise is not supported" && return
[ $(lustre_version_code ost1) -lt $(version_code 2.8.54) ] &&
skip "lustre < 2.8.54 does not support ladvise" && return
- [ "$(facet_fstype ost1)" = "zfs" ] &&
- skip "zfs-osd does not support dontneed advice" && return
+ ! $LFS ladvise -a dontneed $DIR/$tfile &&
+ [ "$(facet_fstype ost1)" = "zfs" ] &&
+ skip "zfs-osd does not support 'ladvise dontneed'" && return
local size_mb=100
local size=$((size_mb * 1048576))
#after mount new plainllog is used
touch $DIR/$tdir/{11..19}
+ local TEMP256FILE=$(mktemp TEMP256XXXXXX)
cat_sl=$(do_facet mds1 \
- "$DEBUGFS -R \\\"dump changelog_catalog cat.dmp\\\" $mdt_dev; \
- llog_reader cat.dmp | grep \\\"type=1064553b\\\" | wc -l")
+ "$DEBUGFS -R \\\"dump changelog_catalog $TEMP256FILE\\\" $mdt_dev; \
+ llog_reader $TEMP256FILE | grep \\\"type=1064553b\\\" | wc -l")
+ rm $TEMP256FILE
if (( cat_sl != 2 )); then
do_facet mds1 $LCTL --device $MDT0 changelog_deregister $cl_user
$LFS changelog_clear $MDT0 $cl_user 0
+ TEMP256FILE=$(mktemp TEMP256XXXXXX)
cat_sl=$(do_facet mds1 \
- "$DEBUGFS -R \\\"dump changelog_catalog cat.dmp\\\" $mdt_dev; \
- llog_reader cat.dmp | grep \\\"type=1064553b\\\" | wc -l")
+ "$DEBUGFS -R \\\"dump changelog_catalog $TEMP256FILE\\\" $mdt_dev; \
+ llog_reader $TEMP256FILE | grep \\\"type=1064553b\\\" | wc -l")
+ rm $TEMP256FILE
do_facet mds1 $LCTL --device $MDT0 changelog_deregister $cl_user
}
run_test 257 "xattr locks are not lost"
+# Verify we take the i_mutex when security requires it
+test_258a() {
+#define OBD_FAIL_IMUTEX_SEC 0x141c
+ $LCTL set_param fail_loc=0x141c
+ touch $DIR/$tfile
+ chmod u+s $DIR/$tfile
+ chmod a+rwx $DIR/$tfile
+ $RUNAS dd if=/dev/zero of=$DIR/$tfile bs=4k count=1 oflag=append
+ RC=$?
+ if [ $RC -ne 0 ]; then
+ error "error, failed to take i_mutex, rc=$?"
+ fi
+ rm -f $DIR/$tfile
+}
+run_test 258a
+
+# Verify we do NOT take the i_mutex in the normal case
+test_258b() {
+#define OBD_FAIL_IMUTEX_NOSEC 0x141d
+ $LCTL set_param fail_loc=0x141d
+ touch $DIR/$tfile
+ chmod a+rwx $DIR
+ chmod a+rw $DIR/$tfile
+ $RUNAS dd if=/dev/zero of=$DIR/$tfile bs=4k count=1 oflag=append
+ RC=$?
+ if [ $RC -ne 0 ]; then
+ error "error, took i_mutex unnecessarily, rc=$?"
+ fi
+ rm -f $DIR/$tfile
+
+}
+run_test 258b "verify i_mutex security behavior"
+
test_260() {
#define OBD_FAIL_MDC_CLOSE 0x806
$LCTL set_param fail_loc=0x80000806
error "getdirstripe failed"
stripe_count=$($LFS getdirstripe -c $DIR/$tdir/striped_dir)
if [ "$stripe_count" != "2" ]; then
- error "stripe_count is $stripe_count, expect 2"
+ error "1:stripe_count is $stripe_count, expect 2"
+ fi
+ stripe_count=$($LFS getdirstripe -T $DIR/$tdir/striped_dir)
+ if [ "$stripe_count" != "2" ]; then
+ error "2:stripe_count is $stripe_count, expect 2"
fi
stripe_index=$($LFS getdirstripe -i $DIR/$tdir/striped_dir)
mkdir $DIR/$tdir/striped_dir/dir_c
$LFS setdirstripe -i 0 -c 2 -t all_char $DIR/$tdir/striped_dir/stp_a ||
- error "set striped dir under striped dir error"
+ error "set striped adir under striped dir error"
- $LFS setdirstripe -i 0 -c 2 -t all_char $DIR/$tdir/striped_dir/stp_b ||
- error "set striped dir under striped dir error"
+ $LFS setdirstripe -i 0 -c 2 -H all_char $DIR/$tdir/striped_dir/stp_b ||
+ error "set striped bdir under striped dir error"
$LFS setdirstripe -i 0 -c 2 -t all_char $DIR/$tdir/striped_dir/stp_c ||
- error "set striped dir under striped dir error"
+ error "set striped cdir under striped dir error"
mrename $DIR/$tdir/striped_dir/dir_a $DIR/$tdir/striped_dir/dir_b ||
error "rename dir under striped dir fails"
mkdir $DIR/$tdir
mkdir $DIR/$tdir/normal_dir
+ #Checking when client cache stripe index
+ $LFS setdirstripe -c$MDSCOUNT $DIR/$tdir/striped_dir
+ $LFS setdirstripe -D -i1 $DIR/$tdir/striped_dir ||
+ error "create striped_dir failed"
+
+ mkdir $DIR/$tdir/striped_dir/dir1 ||
+ error "create dir1 fails"
+ stripe_index=$($LFS getdirstripe -i $DIR/$tdir/striped_dir/dir1)
+ [ $stripe_index -eq 1 ] ||
+ error "dir1 expect 1 got $stripe_index"
+
+ $LFS setdirstripe -i2 $DIR/$tdir/striped_dir/dir2 ||
+ error "create dir2 fails"
+ stripe_index=$($LFS getdirstripe -i $DIR/$tdir/striped_dir/dir2)
+ [ $stripe_index -eq 2 ] ||
+ error "dir2 expect 2 got $stripe_index"
+
+ #check default stripe count/stripe index
test_300_check_default_striped_dir normal_dir $MDSCOUNT 1
test_300_check_default_striped_dir normal_dir 1 0
test_300_check_default_striped_dir normal_dir 2 1
createmany -o $DIR/$tdir/striped_dir/f- 10 ||
error "create files under striped dir failed"
+ $LFS setdirstripe -i0 -c$MDSCOUNT -H all_char $DIR/$tdir/hashdir ||
+ error "set striped hashdir error"
+
+ $LFS setdirstripe -i0 -c$MDSCOUNT -H all_char $DIR/$tdir/hashdir/d0 ||
+ error "create dir0 under hash dir failed"
+ $LFS setdirstripe -i0 -c$MDSCOUNT -H fnv_1a_64 $DIR/$tdir/hashdir/d1 ||
+ error "create dir1 under hash dir failed"
+
# unfortunately, we need to umount to clear dir layout cache for now
# once we fully implement dir layout, we can drop this
umount_client $MOUNT || error "umount failed"
mount_client $MOUNT || error "mount failed"
+ $LFS find -H fnv_1a_64 $DIR/$tdir/hashdir
+ local dircnt=$($LFS find -H fnv_1a_64 $DIR/$tdir/hashdir | wc -l)
+ [ $dircnt -eq 1 ] || error "lfs find striped dir got:$dircnt,except:1"
+
#set the stripe to be unknown hash type
#define OBD_FAIL_UNKNOWN_LMV_STRIPE 0x1901
$LCTL set_param fail_loc=0x1901
skip "Need MDS version at least 2.7.55" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+
local stripe_index
local list=$(comma_list $(mdts_nodes))
[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.54) ] &&
skip "lustre < 2.8.54 does not contain LU-4825 fix" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
local old_iused=$($LFS df -i | grep OST0000 | awk '{ print $3 }')
local new_iused
for i in $(seq 120); do
new_iused=$($LFS df -i | grep OST0000 | awk '{ print $3 }')
- [ $((old_iused - new_iused)) -gt 800 ] && break
+ # system may be too busy to destroy all objs in time, use
+ # a somewhat small value to not fail autotest
+ [ $((old_iused - new_iused)) -gt 400 ] && break
sleep 1
done
echo "waited $i sec, old Iused $old_iused, new Iused $new_iused"
- [ $((old_iused - new_iused)) -gt 800 ] ||
+ [ $((old_iused - new_iused)) -gt 400 ] ||
error "objs not destroyed after unlink"
}
run_test 311 "disable OSP precreate, and unlink should destroy objs"
local objid=$2
local vdevdir=$(dirname $(facet_vdevice $ost))
- local cmd="$ZDB -e -p $vdevdir -dddd $(facet_device $ost)"
+ local cmd="$ZDB -e -p $vdevdir -ddddd $(facet_device $ost)"
local zfs_zapid=$(do_facet $ost $cmd |
grep -w "/O/0/d$((objid%32))" -C 5 |
awk '/Object/{getline; print $1}')
}
test_312() { # LU-4856
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
+
[ $(facet_fstype ost1) = "zfs" ] ||
{ skip "the test only applies to zfs" && return; }
local max_blksz=$(do_facet ost1 \
$ZFS get -p recordsize $(facet_device ost1) |
awk '!/VALUE/{print $3}')
+ local min_blksz=$(getconf PAGE_SIZE)
# to make life a little bit easier
$LFS mkdir -c 1 -i 0 $DIR/$tdir
# block size change by sequential over write
local blksz
- for ((bs=4096; bs <= max_blksz; bs <<= 2)); do
+ for ((bs=$min_blksz; bs <= max_blksz; bs <<= 2)); do
dd if=/dev/zero of=$tf bs=$bs count=1 oflag=sync conv=notrunc
blksz=$(zfs_object_blksz ost1 $zfs_objid)
rm -f $tf
# block size change by sequential append write
- dd if=/dev/zero of=$tf bs=4K count=1 oflag=sync conv=notrunc
+ dd if=/dev/zero of=$tf bs=$min_blksz count=1 oflag=sync conv=notrunc
oid=$($LFS getstripe $tf | awk '/obdidx/{getline; print $2}')
zfs_objid=$(zfs_oid_to_objid ost1 $oid)
- for ((count = 1; count < $((max_blksz / 4096)); count *= 2)); do
- dd if=/dev/zero of=$tf bs=4K count=$count seek=$count \
+ for ((count = 1; count < $((max_blksz / min_blksz)); count *= 2)); do
+ dd if=/dev/zero of=$tf bs=$min_blksz count=$count seek=$count \
oflag=sync conv=notrunc
blksz=$(zfs_object_blksz ost1 $zfs_objid)
- blksz=$((blksz / 8192)) # in 2*4K unit
- [ $blksz -eq $count ] ||
- error "blksz error(in 8k): $blksz, expected: $count"
+ [ $blksz -eq $((2 * count * min_blksz)) ] ||
+ error "blksz error, actual $blksz, " \
+ "expected: 2 * $count * $min_blksz"
done
rm -f $tf
oid=$($LFS getstripe $tf | awk '/obdidx/{getline; print $2}')
zfs_objid=$(zfs_oid_to_objid ost1 $oid)
- dd if=/dev/zero of=$tf bs=8K count=1 oflag=sync conv=notrunc
+ dd if=/dev/zero of=$tf bs=1K count=1 oflag=sync conv=notrunc
blksz=$(zfs_object_blksz ost1 $zfs_objid)
- [ $blksz -eq 8192 ] || error "blksz error: $blksz, expected: 8k"
+ [ $blksz -eq $min_blksz ] ||
+ error "blksz error: $blksz, expected: $min_blksz"
dd if=/dev/zero of=$tf bs=64K count=1 oflag=sync conv=notrunc seek=128
blksz=$(zfs_object_blksz ost1 $zfs_objid)
}
run_test 312 "make sure ZFS adjusts its block size by write pattern"
-test_399() { # LU-7655 for OST fake write
+test_313() {
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
+
+ local file=$DIR/$tfile
+ rm -f $file
+ $SETSTRIPE -c 1 -i 0 $file || error "setstripe failed"
+
+ # define OBD_FAIL_TGT_RCVD_EIO 0x720
+ do_facet ost1 "$LCTL set_param fail_loc=0x720"
+ dd if=/dev/zero of=$file bs=4096 oflag=direct count=1 &&
+ error "write should failed"
+ do_facet ost1 "$LCTL set_param fail_loc=0"
+ rm -f $file
+}
+run_test 313 "io should fail after last_rcvd update fail"
+
+test_fake_rw() {
+ local read_write=$1
+ if [ "$read_write" = "write" ]; then
+ local dd_cmd="dd if=/dev/zero of=$DIR/$tfile"
+ elif [ "$read_write" = "read" ]; then
+ local dd_cmd="dd of=/dev/null if=$DIR/$tfile"
+ else
+ error "argument error"
+ fi
+
# turn off debug for performance testing
local saved_debug=$($LCTL get_param -n debug)
$LCTL set_param debug=0
local blocks=$((ost1_avail_size/2/1024)) # half avail space by megabytes
[ $blocks -gt 1000 ] && blocks=1000 # 1G in maximum
+ if [ "$read_write" = "read" ]; then
+ truncate -s $(expr 1048576 \* $blocks) $DIR/$tfile
+ fi
+
local start_time=$(date +%s.%N)
- dd if=/dev/zero of=$DIR/$tfile bs=1M count=$blocks oflag=sync ||
- error "real dd writing error"
+ $dd_cmd bs=1M count=$blocks oflag=sync ||
+ error "real dd $read_write error"
local duration=$(bc <<< "$(date +%s.%N) - $start_time")
- rm -f $DIR/$tfile
- # define OBD_FAIL_OST_FAKE_WRITE 0x238
+ if [ "$read_write" = "write" ]; then
+ rm -f $DIR/$tfile
+ fi
+
+ # define OBD_FAIL_OST_FAKE_RW 0x238
do_facet ost1 $LCTL set_param fail_loc=0x238
local start_time=$(date +%s.%N)
- dd if=/dev/zero of=$DIR/$tfile bs=1M count=$blocks oflag=sync ||
- error "fake dd writing error"
+ $dd_cmd bs=1M count=$blocks oflag=sync ||
+ error "fake dd $read_write error"
local duration_fake=$(bc <<< "$(date +%s.%N) - $start_time")
- # verify file size
- cancel_lru_locks osc
- $CHECKSTAT -t file -s $((blocks * 1024 * 1024)) $DIR/$tfile ||
- error "$tfile size not $blocks MB"
-
+ if [ "$read_write" = "write" ]; then
+ # verify file size
+ cancel_lru_locks osc
+ $CHECKSTAT -t file -s $((blocks * 1024 * 1024)) $DIR/$tfile ||
+ error "$tfile size not $blocks MB"
+ fi
do_facet ost1 $LCTL set_param fail_loc=0
- echo "fake write $duration_fake vs. normal write $duration in seconds"
+ echo "fake $read_write $duration_fake vs. normal $read_write" \
+ "$duration in seconds"
[ $(bc <<< "$duration_fake < $duration") -eq 1 ] ||
error_not_in_vm "fake write is slower"
$LCTL set_param -n debug="$saved_debug"
rm -f $DIR/$tfile
}
-run_test 399 "fake write should not be slower than normal write"
+test_399a() { # LU-7655 for OST fake write
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
+
+ test_fake_rw write
+}
+run_test 399a "fake write should not be slower than normal write"
+
+test_399b() { # LU-8726 for OST fake read
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
+
+ if [ "$(facet_fstype ost1)" != "ldiskfs" ]; then
+ skip "only for ldiskfs" && return 0
+ fi
+ test_fake_rw read
+}
+run_test 399b "fake read should not be slower than normal read"
test_400a() { # LU-1606, was conf-sanity test_74
local extra_flags=''
#count the number of parameters by "list_param -R"
local params=$($LCTL list_param -R '*' 2>/dev/null | wc -l)
#count the number of parameters by listing proc files
+ local proc_dirs=$(eval \ls -d $proc_regexp 2>/dev/null)
+ echo "proc_dirs='$proc_dirs'"
+ [ -n "$proc_dirs" ] || error "no proc_dirs on $HOSTNAME"
local procs=$(find -L $proc_dirs -mindepth 1 -printf '%P\n' 2>/dev/null|
sort -u | wc -l)
run_test 401d "Verify 'lctl set_param' accepts values containing '='"
test_402() {
+ local server_version=$(lustre_version_code $SINGLEMDS)
+ [[ $server_version -ge $(version_code 2.7.66) ]] ||
+ [[ $server_version -ge $(version_code 2.7.18.4) &&
+ $server_version -lt $(version_code 2.7.50) ]] ||
+ [[ $server_version -ge $(version_code 2.7.2) &&
+ $server_version -lt $(version_code 2.7.11) ]] ||
+ { skip "Need MDS version 2.7.2+ or 2.7.18.4+ or 2.7.66+";
+ return; }
remote_mds_nodsh && skip "remote MDS with nodsh" && return
$LFS setdirstripe -i 0 $DIR/$tdir || error "setdirstripe -i 0 failed"
#define OBD_FAIL_MDS_FLD_LOOKUP 0x15c
run_test 403 "i_nlink should not drop to zero due to aliasing"
test_404() { # LU-6601
+ local server_version=$(lustre_version_code $SINGLEMDS)
+ [[ $server_version -ge $(version_code 2.8.53) ]] ||
+ { skip "Need server version newer than 2.8.52"; return 0; }
+
remote_mds_nodsh && skip "remote MDS with nodsh" && return
local mosps=$(do_facet $SINGLEMDS $LCTL dl |
awk '/osp .*-osc-MDT/ { print $4}')
test_407() {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
-
[[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.55) ]] &&
skip "Need MDS version at least 2.8.55" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
$LFS mkdir -i 0 -c 1 $DIR/$tdir.0 ||
error "$LFS mkdir -i 0 -c 1 $tdir.0 failed"
}
run_test 407 "transaction fail should cause operation fail"
+test_408() {
+ dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1 oflag=direct
+
+ #define OBD_FAIL_OSC_BRW_PREP_REQ2 0x40a
+ lctl set_param fail_loc=0x8000040a
+ # let ll_prepare_partial_page() fail
+ dd if=/dev/zero of=$DIR/$tfile bs=2048 count=1 conv=notrunc || true
+
+ rm -f $DIR/$tfile
+
+ # create at least 100 unused inodes so that
+ # shrink_icache_memory(0) should not return 0
+ touch $DIR/$tfile-{0..100}
+ rm -f $DIR/$tfile-{0..100}
+ sync
+
+ echo 2 > /proc/sys/vm/drop_caches
+}
+run_test 408 "drop_caches should not hang due to page leaks"
+
+test_409()
+{
+ [ $MDSCOUNT -lt 2 ] &&
+ skip "We need at least 2 MDTs for this test" && return
+
+ check_mount_and_prep
+
+ mkdir -p $DIR/$tdir || error "(0) Fail to mkdir"
+ $LFS mkdir -i 1 -c 2 $DIR/$tdir/foo || error "(1) Fail to mkdir"
+ touch $DIR/$tdir/guard || error "(2) Fail to create"
+
+ local PREFIX=$(str_repeat 'A' 128)
+ echo "Create 1K hard links start at $(date)"
+ createmany -l $DIR/$tdir/guard $DIR/$tdir/foo/${PREFIX}_ 1000 ||
+ error "(3) Fail to hard link"
+
+ echo "Links count should be right although linkEA overflow"
+ stat $DIR/$tdir/guard || error "(4) Fail to stat"
+ local linkcount=$(stat --format=%h $DIR/$tdir/guard)
+ [ $linkcount -eq 1001 ] ||
+ error "(5) Unexpected hard links count: $linkcount"
+
+ echo "List all links start at $(date)"
+ ls -l $DIR/$tdir/foo > /dev/null ||
+ error "(6) Fail to list $DIR/$tdir/foo"
+
+ echo "Unlink hard links start at $(date)"
+ unlinkmany $DIR/$tdir/foo/${PREFIX}_ 1000 ||
+ error "(7) Fail to unlink"
+}
+run_test 409 "Large amount of cross-MDTs hard links on the same file"
+
+test_410()
+{
+ # Create a file, and stat it from the kernel
+ local testfile=$DIR/$tfile
+ touch $testfile
+
+ local run_id=$RANDOM
+ local my_ino=$(stat --format "%i" $testfile)
+
+ # Try to insert the module. This will always fail as the
+ # module is designed to not be inserted.
+ insmod $LUSTRE/tests/kernel/kinode.ko run_id=$run_id fname=$testfile \
+ &> /dev/null
+
+ # Anything but success is a test failure
+ dmesg | grep -q \
+ "lustre_kinode_$run_id: inode numbers are identical: $my_ino" ||
+ error "no inode match"
+}
+run_test 410 "Test inode number returned from kernel thread"
+
+prep_801() {
+ [[ $(lustre_version_code mds1) -lt $(version_code 2.9.55) ]] ||
+ [[ $(lustre_version_code ost1) -lt $(version_code 2.9.55) ]] &&
+ skip "Need server version at least 2.9.55" & exit 0
+ start_full_debug_logging
+}
+
+post_801() {
+ stop_full_debug_logging
+}
+
+barrier_stat() {
+ if [ $(lustre_version_code mgs) -le $(version_code 2.10.0) ]; then
+ local st=$(do_facet mgs $LCTL barrier_stat $FSNAME |
+ awk '/The barrier for/ { print $7 }')
+ echo $st
+ else
+ local st=$(do_facet mgs $LCTL barrier_stat -s $FSNAME)
+ echo \'$st\'
+ fi
+}
+
+barrier_expired() {
+ local expired
+
+ if [ $(lustre_version_code mgs) -le $(version_code 2.10.0) ]; then
+ expired=$(do_facet mgs $LCTL barrier_stat $FSNAME |
+ awk '/will be expired/ { print $7 }')
+ else
+ expired=$(do_facet mgs $LCTL barrier_stat -t $FSNAME)
+ fi
+
+ echo $expired
+}
+
+test_801a() {
+ prep_801
+
+ echo "Start barrier_freeze at: $(date)"
+ #define OBD_FAIL_BARRIER_DELAY 0x2202
+ do_facet mgs $LCTL set_param fail_val=5 fail_loc=0x2202
+ do_facet mgs $LCTL barrier_freeze $FSNAME 10 &
+
+ sleep 2
+ local b_status=$(barrier_stat)
+ echo "Got barrier status at: $(date)"
+ [ "$b_status" = "'freezing_p1'" ] ||
+ error "(1) unexpected barrier status $b_status"
+
+ do_facet mgs $LCTL set_param fail_val=0 fail_loc=0
+ wait
+ b_status=$(barrier_stat)
+ [ "$b_status" = "'frozen'" ] ||
+ error "(2) unexpected barrier status $b_status"
+
+ local expired=$(barrier_expired)
+ echo "sleep $((expired + 3)) seconds, then the barrier will be expired"
+ sleep $((expired + 3))
+
+ b_status=$(barrier_stat)
+ [ "$b_status" = "'expired'" ] ||
+ error "(3) unexpected barrier status $b_status"
+
+ do_facet mgs $LCTL barrier_freeze $FSNAME 10 ||
+ error "(4) fail to freeze barrier"
+
+ b_status=$(barrier_stat)
+ [ "$b_status" = "'frozen'" ] ||
+ error "(5) unexpected barrier status $b_status"
+
+ echo "Start barrier_thaw at: $(date)"
+ #define OBD_FAIL_BARRIER_DELAY 0x2202
+ do_facet mgs $LCTL set_param fail_val=5 fail_loc=0x2202
+ do_facet mgs $LCTL barrier_thaw $FSNAME &
+
+ sleep 2
+ b_status=$(barrier_stat)
+ echo "Got barrier status at: $(date)"
+ [ "$b_status" = "'thawing'" ] ||
+ error "(6) unexpected barrier status $b_status"
+
+ do_facet mgs $LCTL set_param fail_val=0 fail_loc=0
+ wait
+ b_status=$(barrier_stat)
+ [ "$b_status" = "'thawed'" ] ||
+ error "(7) unexpected barrier status $b_status"
+
+ #define OBD_FAIL_BARRIER_FAILURE 0x2203
+ do_facet $SINGLEMDS $LCTL set_param fail_loc=0x2203
+ do_facet mgs $LCTL barrier_freeze $FSNAME
+
+ b_status=$(barrier_stat)
+ [ "$b_status" = "'failed'" ] ||
+ error "(8) unexpected barrier status $b_status"
+
+ do_facet $SINGLEMDS $LCTL set_param fail_loc=0
+ do_facet mgs $LCTL barrier_thaw $FSNAME
+
+ post_801
+}
+run_test 801a "write barrier user interfaces and stat machine"
+
+test_801b() {
+ prep_801
+
+ mkdir $DIR/$tdir || error "(1) fail to mkdir"
+ createmany -d $DIR/$tdir/d 6 || "(2) fail to mkdir"
+ touch $DIR/$tdir/d2/f10 || error "(3) fail to touch"
+ touch $DIR/$tdir/d3/f11 || error "(4) fail to touch"
+ touch $DIR/$tdir/d4/f12 || error "(5) fail to touch"
+
+ cancel_lru_locks mdc
+
+ # 180 seconds should be long enough
+ do_facet mgs $LCTL barrier_freeze $FSNAME 180
+
+ local b_status=$(barrier_stat)
+ [ "$b_status" = "'frozen'" ] ||
+ error "(6) unexpected barrier status $b_status"
+
+ mkdir $DIR/$tdir/d0/d10 &
+ mkdir_pid=$!
+
+ touch $DIR/$tdir/d1/f13 &
+ touch_pid=$!
+
+ ln $DIR/$tdir/d2/f10 $DIR/$tdir/d2/f14 &
+ ln_pid=$!
+
+ mv $DIR/$tdir/d3/f11 $DIR/$tdir/d3/f15 &
+ mv_pid=$!
+
+ rm -f $DIR/$tdir/d4/f12 &
+ rm_pid=$!
+
+ stat $DIR/$tdir/d5 || error "(7) stat should succeed"
+
+ # To guarantee taht the 'stat' is not blocked
+ b_status=$(barrier_stat)
+ [ "$b_status" = "'frozen'" ] ||
+ error "(8) unexpected barrier status $b_status"
+
+ # let above commands to run at background
+ sleep 5
+
+ ps -p $mkdir_pid || error "(9) mkdir should be blocked"
+ ps -p $touch_pid || error "(10) touch should be blocked"
+ ps -p $ln_pid || error "(11) link should be blocked"
+ ps -p $mv_pid || error "(12) rename should be blocked"
+ ps -p $rm_pid || error "(13) unlink should be blocked"
+
+ b_status=$(barrier_stat)
+ [ "$b_status" = "'frozen'" ] ||
+ error "(14) unexpected barrier status $b_status"
+
+ do_facet mgs $LCTL barrier_thaw $FSNAME
+ b_status=$(barrier_stat)
+ [ "$b_status" = "'thawed'" ] ||
+ error "(15) unexpected barrier status $b_status"
+
+ wait $mkdir_pid || error "(16) mkdir should succeed"
+ wait $touch_pid || error "(17) touch should succeed"
+ wait $ln_pid || error "(18) link should succeed"
+ wait $mv_pid || error "(19) rename should succeed"
+ wait $rm_pid || error "(20) unlink should succeed"
+
+ post_801
+}
+run_test 801b "modification will be blocked by write barrier"
+
+test_801c() {
+ [[ $MDSCOUNT -lt 2 ]] && skip "needs >= 2 MDTs" && return
+
+ prep_801
+
+ stop mds2 || error "(1) Fail to stop mds2"
+
+ do_facet mgs $LCTL barrier_freeze $FSNAME 30
+
+ local b_status=$(barrier_stat)
+ [ "$b_status" = "'expired'" -o "$b_status" = "'failed'" ] || {
+ do_facet mgs $LCTL barrier_thaw $FSNAME
+ error "(2) unexpected barrier status $b_status"
+ }
+
+ do_facet mgs $LCTL barrier_rescan $FSNAME ||
+ error "(3) Fail to rescan barrier bitmap"
+
+ do_facet mgs $LCTL barrier_freeze $FSNAME 10
+
+ b_status=$(barrier_stat)
+ [ "$b_status" = "'frozen'" ] ||
+ error "(4) unexpected barrier status $b_status"
+
+ do_facet mgs $LCTL barrier_thaw $FSNAME
+ b_status=$(barrier_stat)
+ [ "$b_status" = "'thawed'" ] ||
+ error "(5) unexpected barrier status $b_status"
+
+ local devname=$(mdsdevname 2)
+
+ start mds2 $devname $MDS_MOUNT_OPTS || error "(6) Fail to start mds2"
+
+ do_facet mgs $LCTL barrier_rescan $FSNAME ||
+ error "(7) Fail to rescan barrier bitmap"
+
+ post_801
+}
+run_test 801c "rescan barrier bitmap"
+
+saved_MGS_MOUNT_OPTS=$MGS_MOUNT_OPTS
+saved_MDS_MOUNT_OPTS=$MDS_MOUNT_OPTS
+saved_OST_MOUNT_OPTS=$OST_MOUNT_OPTS
+
+cleanup_802() {
+ trap 0
+
+ stopall
+ MGS_MOUNT_OPTS=$saved_MGS_MOUNT_OPTS
+ MDS_MOUNT_OPTS=$saved_MDS_MOUNT_OPTS
+ OST_MOUNT_OPTS=$saved_OST_MOUNT_OPTS
+ setupall
+}
+
+test_802() {
+
+ [[ $(lustre_version_code mds1) -lt $(version_code 2.9.55) ]] ||
+ [[ $(lustre_version_code ost1) -lt $(version_code 2.9.55) ]] &&
+ skip "Need server version at least 2.9.55" & exit 0
+
+ mkdir $DIR/$tdir || error "(1) fail to mkdir"
+
+ cp $LUSTRE/tests/test-framework.sh $DIR/$tdir/ ||
+ error "(2) Fail to copy"
+
+ trap cleanup_802 EXIT
+
+ # sync by force before remount as readonly
+ sync; sync_all_data; sleep 3; sync_all_data
+
+ stopall
+
+ MGS_MOUNT_OPTS=$(csa_add "$MGS_MOUNT_OPTS" -o rdonly_dev)
+ MDS_MOUNT_OPTS=$(csa_add "$MDS_MOUNT_OPTS" -o rdonly_dev)
+ OST_MOUNT_OPTS=$(csa_add "$OST_MOUNT_OPTS" -o rdonly_dev)
+
+ echo "Mount the server as read only"
+ setupall server_only || error "(3) Fail to start servers"
+
+ echo "Mount client without ro should fail"
+ mount_client $MOUNT &&
+ error "(4) Mount client without 'ro' should fail"
+
+ echo "Mount client with ro should succeed"
+ mount_client $MOUNT ro ||
+ error "(5) Mount client with 'ro' should succeed"
+
+ echo "Modify should be refused"
+ touch $DIR/$tdir/guard && error "(6) Touch should fail under ro mode"
+
+ echo "Read should be allowed"
+ diff $LUSTRE/tests/test-framework.sh $DIR/$tdir/test-framework.sh ||
+ error "(7) Read should succeed under ro mode"
+
+ cleanup_802
+}
+run_test 802 "simulate readonly device"
+
#
# tests that do cleanup/setup should be run at the end
#
git://git.whamcloud.com / fs / lustre-release.git / blobdiff