# skipped tests: LU-8411 LU-9096 LU-9054 ..
ALWAYS_EXCEPT=" 407 253 312 $ALWAYS_EXCEPT"
+if $SHARED_KEY; then
+# bug number for skipped tests: LU-9795 (all below)
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 17n 60a 133g 300f"
+fi
+
# Check Grants after these tests
GRANT_CHECK_LIST="$GRANT_CHECK_LIST 42a 42b 42c 42d 42e 63a 63b 64a 64b 64c"
-
SRCDIR=$(cd $(dirname $0); echo $PWD)
export PATH=$PATH:/sbin
}
run_test 24u "create stripe file"
-page_size() {
- local size
- size=$(getconf PAGE_SIZE 2>/dev/null)
- echo -n ${size:-4096}
-}
-
simple_cleanup_common() {
local rc=0
trap 0
# take into account of overhead in lu_dirpage header and end mark in
# each page, plus one in rpc_num calculation.
local dirent_size=$((32 + (${#tfile} | 7) + 1 + 8))
- local page_entries=$((($(page_size) - 24) / dirent_size))
+ local page_entries=$(((PAGE_SIZE - 24) / dirent_size))
local mdt_idx=$($LFS getdirstripe -i $(dirname $fname))
local rpc_pages=$(max_pages_per_rpc $mdt_idx)
local rpc_max=$((nrfiles / (page_entries * rpc_pages) + stripes))
# Since just timed wait is not good enough, let's do a sync write
# that way we are sure enough time for a roundtrip + processing
# passed + 2 seconds of extra margin.
- dd if=/dev/zero of=$DIR/${tfile}-1 bs=4096 oflag=direct count=1
+ dd if=/dev/zero of=$DIR/${tfile}-1 bs=$PAGE_SIZE oflag=direct count=1
rm $DIR/${tfile}-1
sleep 2
[ $PARALLEL == "yes" ] && skip "skip parallel run"
local TDIR=$DIR/${tdir}e
- local pagesz=$(page_size)
local pages=16 # hardcoded 16 pages, don't change it.
local files=$((OSTCOUNT * 500)) # hopefully 500 files on each OST
local proc_osc0="osc.${FSNAME}-OST0000-osc-[^MDT]*"
$LCTL set_param $proc_osc0/rpc_stats 0
for ((;i<$files; i++)); do
[ $($GETSTRIPE -i $TDIR/f$i) -eq 0 ] || continue
- dd if=/dev/zero of=$TDIR/f$i bs=$pagesz count=$pages 2>/dev/null
+ dd if=/dev/zero of=$TDIR/f$i bs=$PAGE_SIZE count=$pages 2>/dev/null
done
sync
$LCTL get_param $proc_osc0/rpc_stats
f="$DIR/f46"
stop_writeback
sync
- dd if=/dev/zero of=$f bs=`page_size` seek=511 count=1
+ dd if=/dev/zero of=$f bs=$PAGE_SIZE seek=511 count=1
sync
- dd conv=notrunc if=/dev/zero of=$f bs=`page_size` seek=1023 count=1
- dd conv=notrunc if=/dev/zero of=$f bs=`page_size` seek=511 count=1
+ dd conv=notrunc if=/dev/zero of=$f bs=$PAGE_SIZE seek=1023 count=1
+ dd conv=notrunc if=/dev/zero of=$f bs=$PAGE_SIZE seek=511 count=1
sync
start_writeback
}
f="$DIR/f54b"
mknod $f c 1 3
chmod 0666 $f
- dd if=/dev/zero of=$f bs=$(page_size) count=1
+ dd if=/dev/zero of=$f bs=$PAGE_SIZE count=1
}
run_test 54b "char device works in lustre ======================"
trap cleanup_54c EXIT
mknod $loopdev b 7 $LOOPNUM
echo "make a loop file system with $DIR/$tfile on $loopdev ($LOOPNUM)."
- dd if=/dev/zero of=$DIR/$tfile bs=$(get_page_size client) seek=1024 count=1 > /dev/null
+ dd if=/dev/zero of=$DIR/$tfile bs=$PAGE_SIZE seek=1024 count=1 > /dev/null
losetup $loopdev $DIR/$tfile ||
error "can't set up $loopdev for $DIR/$tfile"
mkfs.ext2 $loopdev || error "mke2fs on $loopdev"
test_mkdir $DIR/$tdir
mount -t ext2 $loopdev $DIR/$tdir ||
error "error mounting $loopdev on $DIR/$tdir"
- dd if=/dev/zero of=$DIR/$tdir/tmp bs=$(get_page_size client) count=30 ||
+ dd if=/dev/zero of=$DIR/$tdir/tmp bs=$PAGE_SIZE count=30 ||
error "dd write"
df $DIR/$tdir
- dd if=$DIR/$tdir/tmp of=/dev/zero bs=$(get_page_size client) count=30 ||
+ dd if=$DIR/$tdir/tmp of=/dev/zero bs=$PAGE_SIZE count=30 ||
error "dd read"
cleanup_54c
}
run_test 56wb "check lfs_migrate pool support"
test_56wc() {
- local file1="$DIR/$tdir/file 1"
+ local file1="$DIR/$tdir/file1"
echo -n "Creating test dir..."
test_mkdir $DIR/$tdir &> /dev/null || error "cannot create dir"
run_test 56ab "lfs find --blocks"
test_56ba() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.50) ] &&
+ skip "Need MDS version at least 2.10.50"
+
# Create composite files with one component
local dir=$DIR/$tdir
else
print from_begin
}")
- [[ $LLOG_COUNT -gt 100 ]] &&
+
+ [[ $LLOG_COUNT -gt 120 ]] &&
error "CDEBUG_LIMIT not limiting messages ($LLOG_COUNT)" || true
}
-run_test 60b "limit repeated messages from CERROR/CWARN ========"
+run_test 60b "limit repeated messages from CERROR/CWARN"
test_60c() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
}
run_test 60e "no space while new llog is being created"
+test_60g() {
+ local pid
+
+ test_mkdir -c $MDSCOUNT $DIR/$tdir
+ $LFS setdirstripe -D -i -1 -c $MDSCOUNT $DIR/$tdir
+
+ (
+ local index=0
+ while true; do
+ mkdir $DIR/$tdir/subdir$index 2>/dev/null
+ rmdir $DIR/$tdir/subdir$index 2>/dev/null
+ index=$((index + 1))
+ done
+ ) &
+
+ pid=$!
+
+ for i in $(seq 100); do
+ # define OBD_FAIL_OSD_TXN_START 0x19a
+ do_facet mds1 lctl set_param fail_loc=0x8000019a
+ usleep 100
+ done
+
+ kill -9 $pid
+
+ mkdir $DIR/$tdir/new || error "mkdir failed"
+ rmdir $DIR/$tdir/new || error "rmdir failed"
+}
+run_test 60g "transaction abort won't cause MDT hung"
+
test_61() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
f="$DIR/f61"
- dd if=/dev/zero of=$f bs=$(page_size) count=1 || error "dd $f failed"
+ dd if=/dev/zero of=$f bs=$PAGE_SIZE count=1 || error "dd $f failed"
cancel_lru_locks osc
$MULTIOP $f OSMWUc || error "$MULTIOP $f failed"
sync
want_grant() {
local tgt=$1
- local page_size=$(get_page_size client)
-
local nrpages=$($LCTL get_param -n osc.${tgt}.max_pages_per_rpc)
local rpc_in_flight=$($LCTL get_param -n osc.${tgt}.max_rpcs_in_flight)
local dirty_max_pages=$($LCTL get_param -n osc.${tgt}.max_dirty_mb)
- dirty_max_pages=$((dirty_max_pages * 1024 * 1024 / page_size))
+ dirty_max_pages=$((dirty_max_pages * 1024 * 1024 / PAGE_SIZE))
[[ $dirty_max_pages -gt $nrpages ]] && nrpages=$dirty_max_pages
- local undirty=$((nrpages * page_size))
+ local undirty=$((nrpages * PAGE_SIZE))
local max_extent_pages
max_extent_pages=$($LCTL get_param osc.${tgt}.import |
grep grant_max_extent_size | awk '{print $2}')
- max_extent_pages=$((max_extent_pages / page_size))
+ max_extent_pages=$((max_extent_pages / PAGE_SIZE))
local nrextents=$(((nrpages + max_extent_pages - 1) / max_extent_pages))
local grant_extent_tax
grant_extent_tax=$($LCTL get_param osc.${tgt}.import |
test_101g_brw_size_test() {
local mb=$1
- local pages=$((mb * 1048576 / $(page_size)))
+ local pages=$((mb * 1048576 / PAGE_SIZE))
local file=$DIR/$tfile
$LCTL set_param osc.*.max_pages_per_rpc=${mb}M ||
test_127b() { # bug LU-333
[ $PARALLEL == "yes" ] && skip "skip parallel run"
+ local name count samp unit min max sum sumsq
$LCTL set_param llite.*.stats=0
- FSIZE=65536 # sized fixed to match PAGE_SIZE for most clients
# perform 2 reads and writes so MAX is different from SUM.
- dd if=/dev/zero of=$DIR/$tfile bs=$FSIZE count=1
- dd if=/dev/zero of=$DIR/$tfile bs=$FSIZE count=1
+ dd if=/dev/zero of=$DIR/$tfile bs=$PAGE_SIZE count=1
+ dd if=/dev/zero of=$DIR/$tfile bs=$PAGE_SIZE count=1
cancel_lru_locks osc
- dd if=$DIR/$tfile of=/dev/null bs=$FSIZE count=1
- dd if=$DIR/$tfile of=/dev/null bs=$FSIZE count=1
-
- $LCTL get_param llite.*.stats | grep samples > $TMP/${tfile}.tmp
- while read NAME COUNT SAMP UNIT MIN MAX SUM SUMSQ; do
- echo "got $COUNT $NAME"
- eval $NAME=$COUNT || error "Wrong proc format"
-
- case $NAME in
- read_bytes)
- [ $COUNT -ne 2 ] && error "count is not 2: $COUNT"
- [ $MIN -ne $FSIZE ] && error "min is not $FSIZE: $MIN"
- [ $MAX -ne $FSIZE ] && error "max is incorrect: $MAX"
- [ $SUM -ne $((FSIZE * 2)) ] && error "sum is wrong: $SUM"
- ;;
- write_bytes)
- [ $COUNT -ne 2 ] && error "count is not 2: $COUNT"
- [ $MIN -ne $FSIZE ] && error "min is not $FSIZE: $MIN"
- [ $MAX -ne $FSIZE ] && error "max is incorrect: $MAX"
- [ $SUM -ne $((FSIZE * 2)) ] && error "sum is wrong: $SUM"
- ;;
- *) ;;
- esac
- done < $TMP/${tfile}.tmp
+ dd if=$DIR/$tfile of=/dev/null bs=$PAGE_SIZE count=1
+ dd if=$DIR/$tfile of=/dev/null bs=$PAGE_SIZE count=1
+
+ $LCTL get_param llite.*.stats | grep samples > $TMP/$tfile.tmp
+ while read name count samp unit min max sum sumsq; do
+ echo "got $count $name"
+ eval $name=$count || error "Wrong proc format"
+
+ case $name in
+ read_bytes)
+ [ $count -ne 2 ] && error "count is not 2: $count"
+ [ $min -ne $PAGE_SIZE ] &&
+ error "min is not $PAGE_SIZE: $min"
+ [ $max -ne $PAGE_SIZE ] &&
+ error "max is incorrect: $max"
+ [ $sum -ne $((PAGE_SIZE * 2)) ] &&
+ error "sum is wrong: $sum"
+ ;;
+ write_bytes)
+ [ $count -ne 2 ] && error "count is not 2: $count"
+ [ $min -ne $PAGE_SIZE ] &&
+ error "min is not $PAGE_SIZE: $min"
+ [ $max -ne $PAGE_SIZE ] &&
+ error "max is incorrect: $max"
+ [ $sum -ne $((PAGE_SIZE * 2)) ] &&
+ error "sum is wrong: $sum"
+ ;;
+ *) ;;
+ esac
+ done < $TMP/$tfile.tmp
#check that we actually got some stats
[ "$read_bytes" ] || error "Missing read_bytes stats"
;;
*) error "Wrong facet '$facet'" ;;
esac
- echo $res
[ "$res" ] || error "The counter for $op on $facet was not incremented"
# if the argument $3 is zero, it means any stat increment is ok.
if [[ $want -gt 0 ]]; then
run_test 133a "Verifying MDT stats ========================================"
test_133b() {
+ local res
+
[ $PARALLEL == "yes" ] && skip "skip parallel run"
remote_ost_nodsh && skip "remote OST with nodsh"
remote_mds_nodsh && skip "remote MDS with nodsh"
# Sleep to avoid a cached response.
#define OBD_STATFS_CACHE_SECONDS 1
sleep 2
+ do_facet $SINGLEMDS $LCTL set_param mdt.*.md_stats=clear
+ do_facet ost1 $LCTL set_param obdfilter.*.exports.*.stats=clear
$LFS df || error "lfs failed"
check_stats $SINGLEMDS "statfs" 1
+ # check aggregated statfs (LU-10018)
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.54) ] &&
+ return 0
+ [ $(lustre_version_code client) -lt $(version_code 2.11.54) ] &&
+ return 0
+ sleep 2
+ do_facet $SINGLEMDS $LCTL set_param mdt.*.md_stats=clear
+ do_facet ost1 $LCTL set_param obdfilter.*.exports.*.stats=clear
+ df $DIR
+ check_stats $SINGLEMDS "statfs" 1
+
+ # We want to check that the client didn't send OST_STATFS to
+ # ost1 but the MDT also uses OST_STATFS for precreate. So some
+ # extra care is needed here.
+ if remote_mds; then
+ local nid=$($LCTL list_nids | head -1 | sed "s/\./\\\./g")
+ local param="obdfilter.$FSNAME-OST0000.exports.'$nid'.stats"
+
+ res=$(do_facet ost1 $LCTL get_param $param | grep statfs)
+ [ "$res" ] && error "OST got STATFS"
+ fi
+
return 0
}
run_test 133b "Verifying extra MDT stats =================================="
find $proc_dirs -exec cat '{}' \; &> /dev/null
# Second verifying readability.
- $LCTL get_param -R '*' &> /dev/null || error "proc file read failed"
+ $LCTL get_param -R '*' &> /dev/null
# Verifing writability with badarea_io.
find $proc_dirs \
}
run_test 184e "Recreate layout after stripeless layout swaps"
+test_184f() {
+ # Create a file with name longer than sizeof(struct stat) ==
+ # 144 to see if we can get chars from the file name to appear
+ # in the returned striping. Note that 'f' == 0x66.
+ local file=$(for ((i = 0; i < 200; i++)); do echo -n f; done)
+
+ mkdir -p $DIR/$tdir
+ mcreate $DIR/$tdir/$file
+ if lfs find --stripe-count 0x6666 $DIR/$tdir | grep $file; then
+ error "IOC_MDC_GETFILEINFO returned garbage striping"
+ fi
+}
+run_test 184f "IOC_MDC_GETFILEINFO for files with long names but no striping"
+
test_185() { # LU-2441
# LU-3553 - no volatile file support in old servers
[[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.3.60) ]] ||
jobstats_set() {
local new_jobenv=$1
- do_facet mgs $LCTL conf_param $FSNAME.sys.jobid_var=$new_jobenv
- wait_update $HOSTNAME "$LCTL get_param -n jobid_var" $new_jobenv
+ set_persistent_param_and_check client "jobid_var" \
+ "$FSNAME.sys.jobid_var" $new_jobenv
}
test_205() { # Job stats
local old_jobenv=$($LCTL get_param -n jobid_var)
[ $old_jobenv != $JOBENV ] && jobstats_set $JOBENV
- stack_trap "do_facet mgs \
- $LCTL conf_param $FSNAME.sys.jobid_var=$old_jobenv" EXIT
+ if [[ $PERM_CMD = *"set_param -P"* ]]; then
+ stack_trap "do_facet mgs $PERM_CMD jobid_var=$old_jobenv" EXIT
+ else
+ stack_trap "do_facet mgs $PERM_CMD \
+ $FSNAME.sys.jobid_var=$old_jobenv" EXIT
+ fi
changelog_register
local old_interval=$(do_facet $SINGLEMDS lctl get_param -n \
osc.*.max_pages_per_rpc)
local at_max=$($LCTL get_param -n at_max)
local timeout=$($LCTL get_param -n timeout)
- local test_at="$LCTL get_param -n at_max"
+ local test_at="at_max"
local param_at="$FSNAME.sys.at_max"
- local test_timeout="$LCTL get_param -n timeout"
+ local test_timeout="timeout"
local param_timeout="$FSNAME.sys.timeout"
$LCTL set_param -n osc.*.max_pages_per_rpc=1024
- set_conf_param_and_check client "$test_at" "$param_at" 0 ||
- error "conf_param at_max=0 failed"
- set_conf_param_and_check client "$test_timeout" "$param_timeout" 5 ||
- error "conf_param timeout=5 failed"
+ set_persistent_param_and_check client "$test_at" "$param_at" 0
+ set_persistent_param_and_check client "$test_timeout" "$param_timeout" 5
#define OBD_FAIL_PTLRPC_CLIENT_BULK_CB3 0x520
do_facet ost1 $LCTL set_param fail_loc=0x520
sync
do_facet ost1 $LCTL set_param fail_loc=0
- set_conf_param_and_check client "$test_at" "$param_at" $at_max ||
- error "conf_param at_max=$at_max failed"
- set_conf_param_and_check client "$test_timeout" "$param_timeout" \
- $timeout || error "conf_param timeout=$timeout failed"
+ set_persistent_param_and_check client "$test_at" "$param_at" $at_max
+ set_persistent_param_and_check client "$test_timeout" "$param_timeout" \
+ $timeout
$LCTL set_param -n $pages_per_rpc
restore_lustre_params < $p
}
run_test 230i "lfs migrate -m tolerates trailing slashes"
+test_230j() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ skip "Need MDS version at least 2.11.52"
+
+ $LFS mkdir -m 0 -c 1 $DIR/$tdir || error "mkdir $tdir failed"
+ $LFS setstripe -E 1M -L mdt $DIR/$tdir/$tfile ||
+ error "create $tfile failed"
+ cat /etc/passwd > $DIR/$tdir/$tfile
+
+ $LFS migrate -m 1 $DIR/$tdir
+
+ cmp /etc/passwd $DIR/$tdir/$tfile ||
+ error "DoM file mismatch after migration"
+}
+run_test 230j "DoM file data not changed after dir migration"
+
test_231a()
{
# For simplicity this test assumes that max_pages_per_rpc
# is the same across all OSCs
local max_pages=$($LCTL get_param -n osc.*.max_pages_per_rpc | head -n1)
- local bulk_size=$((max_pages * 4096))
+ local bulk_size=$((max_pages * PAGE_SIZE))
local brw_size=$(do_facet ost1 $LCTL get_param -n obdfilter.*.brw_size |
head -n 1)
}
run_test 236 "Layout swap on open unlinked file"
-# test to verify file handle related system calls
-# (name_to_handle_at/open_by_handle_at)
-# The new system calls are supported in glibc >= 2.14.
-
-test_237() {
- echo "Test file_handle syscalls" > $DIR/$tfile ||
- error "write failed"
- check_fhandle_syscalls $DIR/$tfile ||
- error "check_fhandle_syscalls failed"
-}
-run_test 237 "Verify name_to_handle_at/open_by_handle_at syscalls"
-
# LU-4659 linkea consistency
test_238() {
local server_version=$(lustre_version_code $SINGLEMDS)
run_test 240 "race between ldlm enqueue and the connection RPC (no ASSERT)"
test_241_bio() {
- for LOOP in $(seq $1); do
- dd if=$DIR/$tfile of=/dev/null bs=40960 count=1 2>/dev/null
+ local count=$1
+ local bsize=$2
+
+ for LOOP in $(seq $count); do
+ dd if=$DIR/$tfile of=/dev/null bs=$bsize count=1 2>/dev/null
cancel_lru_locks $OSC || true
done
}
test_241_dio() {
+ local count=$1
+ local bsize=$2
+
for LOOP in $(seq $1); do
- dd if=$DIR/$tfile of=/dev/null bs=40960 count=1 \
- iflag=direct 2>/dev/null
+ dd if=$DIR/$tfile of=/dev/null bs=$bsize count=1 iflag=direct \
+ 2>/dev/null
done
}
test_241a() { # was test_241
- dd if=/dev/zero of=$DIR/$tfile count=1 bs=40960
+ local bsize=$PAGE_SIZE
+
+ (( bsize < 40960 )) && bsize=40960
+ dd if=/dev/zero of=$DIR/$tfile count=1 bs=$bsize
ls -la $DIR/$tfile
cancel_lru_locks $OSC
- test_241_bio 1000 &
+ test_241_bio 1000 $bsize &
PID=$!
- test_241_dio 1000
+ test_241_dio 1000 $bsize
wait $PID
}
run_test 241a "bio vs dio"
test_241b() {
- dd if=/dev/zero of=$DIR/$tfile count=1 bs=40960
+ local bsize=$PAGE_SIZE
+
+ (( bsize < 40960 )) && bsize=40960
+ dd if=/dev/zero of=$DIR/$tfile count=1 bs=$bsize
ls -la $DIR/$tfile
- test_241_dio 1000 &
+ test_241_dio 1000 $bsize &
PID=$!
- test_241_dio 1000
+ test_241_dio 1000 $bsize
wait $PID
}
run_test 241b "dio vs dio"
lctl set_param -n mdc.*.stats=clear
dd if=/dev/zero of=$dom bs=4096 count=1 || return 1
cat $dom > /dev/null
- local reads=$(lctl get_param -n mdc.*.stats |
- awk '/ost_read/ {print $2}')
- [ -z $reads ] || error "Unexpected $reads READ RPCs"
+ local reads=$(lctl get_param -n mdc.*.stats | grep -c ost_read)
+ [ $reads -eq 0 ] || error "Unexpected $reads READ RPCs"
ls $dom
rm -f $dom
}
$CHECKSTAT -t file -s 4096 $dom || error "stat #1 fails"
# second stat to check size is cached on client
$CHECKSTAT -t file -s 4096 $dom || error "stat #2 fails"
- local gls=$(lctl get_param -n mdc.*.stats |
- awk '/ldlm_glimpse/ {print $2}')
- [ -z $gls ] || error "Unexpected $gls glimpse RPCs"
+ local gls=$(lctl get_param -n mdc.*.stats | grep -c ldlm_glimpse)
+ [ $gls -eq 0 ] || error "Unexpected $gls glimpse RPCs"
rm -f $dom
}
run_test 271b "DoM: no glimpse RPC for stat (DoM only file)"
$CHECKSTAT -t file -s 2097152 $dom || error "stat"
# second stat to check size is cached on client
$CHECKSTAT -t file -s 2097152 $dom || error "stat"
- local gls=$(lctl get_param -n mdc.*.stats |
- awk '/ldlm_glimpse/ {print $2}')
- [ -z $gls ] || error "Unexpected $gls glimpse RPCs"
- local gls=$(lctl get_param -n osc.*.stats |
- awk '/ldlm_glimpse/ {print $2}')
- [ -z $gls ] || error "Unexpected $gls OSC glimpse RPCs"
+ local gls=$(lctl get_param -n mdc.*.stats | grep -c ldlm_glimpse)
+ [ $gls == 0 ] || error "Unexpected $gls glimpse RPCs"
+ local gls=$(lctl get_param -n osc.*.stats | grep -c ldlm_glimpse)
+ [ $gls == 0 ] || error "Unexpected $gls OSC glimpse RPCs"
rm -f $dom
}
run_test 271ba "DoM: no glimpse RPC for stat (combined file)"
+
+get_mdc_stats() {
+ local mdtidx=$1
+ local param=$2
+ local mdt=MDT$(printf %04x $mdtidx)
+
+ if [ -z $param ]; then
+ lctl get_param -n mdc.*$mdt*.stats
+ else
+ lctl get_param -n mdc.*$mdt*.stats | awk "/$param/"'{print $2}'
+ fi
+}
+
test_271c() {
[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.55) ] &&
skip "Need MDS version at least 2.10.55"
createmany -o $dom 1000
lctl set_param -n mdc.*.stats=clear
smalliomany -w $dom 1000 200
- lctl get_param -n mdc.*.stats
- local enq=$(lctl get_param -n mdc.*.stats |
- awk '/ldlm_ibits_enqueue/ {print $2}')
+ get_mdc_stats $mdtidx
+ local enq=$(get_mdc_stats $mdtidx ldlm_ibits_enqueue)
# Each file has 1 open, 1 IO enqueues, total 2000
# but now we have also +1 getxattr for security.capability, total 3000
[ $enq -ge 2000 ] || error "Too few enqueues $enq, expected > 2000"
createmany -o $dom 1000
lctl set_param -n mdc.*.stats=clear
smalliomany -w $dom 1000 200
- lctl get_param -n mdc.*.stats
- local enq_2=$(lctl get_param -n mdc.*.stats |
- awk '/ldlm_ibits_enqueue/ {print $2}')
+ local enq_2=$(get_mdc_stats $mdtidx ldlm_ibits_enqueue)
# Expect to see reduced amount of RPCs by 1000 due to single enqueue
# for OPEN and IO lock.
[ $((enq - enq_2)) -ge 1000 ] ||
$LFS setstripe -E 1024K -L mdt $DIR/$tdir
local mdtidx=$($GETSTRIPE -M $DIR/$tdir)
- local facet=mds$((mdtidx + 1))
cancel_lru_locks mdc
dd if=/dev/urandom of=$tmp bs=1000 count=1
# append data to the same file it should update local page
echo "Append to the same page"
cat /etc/hosts >> $dom
- local num=$(lctl get_param -n mdc.*.stats |
- awk '/ost_read/ {print $2}')
- local ra=$(lctl get_param -n mdc.*.stats |
- awk '/req_active/ {print $2}')
- local rw=$(lctl get_param -n mdc.*.stats |
- awk '/req_waittime/ {print $2}')
+ local num=$(get_mdc_stats $mdtidx ost_read)
+ local ra=$(get_mdc_stats $mdtidx req_active)
+ local rw=$(get_mdc_stats $mdtidx req_waittime)
[ -z $num ] || error "$num READ RPC occured"
[ $ra == $rw ] || error "$((ra - rw)) resend occured"
echo "Open and read file"
cat $dom > /dev/null
- local num=$(lctl get_param -n mdc.*.stats |
- awk '/ost_read/ {print $2}')
- local ra=$(lctl get_param -n mdc.*.stats |
- awk '/req_active/ {print $2}')
- local rw=$(lctl get_param -n mdc.*.stats |
- awk '/req_waittime/ {print $2}')
+ local num=$(get_mdc_stats $mdtidx ost_read)
+ local ra=$(get_mdc_stats $mdtidx req_active)
+ local rw=$(get_mdc_stats $mdtidx req_waittime)
[ -z $num ] || error "$num READ RPC occured"
[ $ra == $rw ] || error "$((ra - rw)) resend occured"
$LFS setstripe -E 1024K -L mdt $DIR/$tdir
local mdtidx=$($GETSTRIPE -M $DIR/$tdir)
- local facet=mds$((mdtidx + 1))
cancel_lru_locks mdc
dd if=/dev/urandom of=$tmp bs=30K count=1
echo "Append to the same page"
cat /etc/hosts >> $dom
- local num=$(lctl get_param -n mdc.*.stats | \
- awk '/ost_read/ {print $2}')
- local ra=$(lctl get_param -n mdc.*.stats | \
- awk '/req_active/ {print $2}')
- local rw=$(lctl get_param -n mdc.*.stats | \
- awk '/req_waittime/ {print $2}')
+ local num=$(get_mdc_stats $mdtidx ost_read)
+ local ra=$(get_mdc_stats $mdtidx req_active)
+ local rw=$(get_mdc_stats $mdtidx req_waittime)
[ -z $num ] || error "$num READ RPC occured"
# Reply buffer can be adjusted for larger buffer by resend
echo "Open and read file"
cat $dom > /dev/null
- local num=$(lctl get_param -n mdc.*.stats | \
- awk '/ost_read/ {print $2}')
- local ra=$(lctl get_param -n mdc.*.stats | \
- awk '/req_active/ {print $2}')
- local rw=$(lctl get_param -n mdc.*.stats | \
- awk '/req_waittime/ {print $2}')
+ local num=$(get_mdc_stats $mdtidx ost_read)
+ local ra=$(get_mdc_stats $mdtidx req_active)
+ local rw=$(get_mdc_stats $mdtidx req_waittime)
[ -z $num ] || error "$num READ RPC occured"
# Reply buffer can be adjusted for larger buffer by resend
$LFS setstripe -E 1024K -L mdt $DIR/$tdir
local mdtidx=$($GETSTRIPE -M $DIR/$tdir)
- local facet=mds$((mdtidx + 1))
cancel_lru_locks mdc
dd if=/dev/urandom of=$tmp bs=200000 count=1
echo "Append to the same page"
cat /etc/hosts >> $dom
- local num=$(lctl get_param -n mdc.*.stats | \
- awk '/ost_read/ {print $2}')
- local ra=$(lctl get_param -n mdc.*.stats | \
- awk '/req_active/ {print $2}')
- local rw=$(lctl get_param -n mdc.*.stats | \
- awk '/req_waittime/ {print $2}')
+ local num=$(get_mdc_stats $mdtidx ost_read)
+ local ra=$(get_mdc_stats $mdtidx req_active)
+ local rw=$(get_mdc_stats $mdtidx req_waittime)
[ -z $num ] || error "$num READ RPC occured"
[ $ra == $rw ] || error "$((ra - rw)) resend occured"
echo "Open and read file"
cat $dom > /dev/null
- local num=$(lctl get_param -n mdc.*.stats | \
- awk '/ost_read/ {print $2}')
- local ra=$(lctl get_param -n mdc.*.stats | \
- awk '/req_active/ {print $2}')
- local rw=$(lctl get_param -n mdc.*.stats | \
- awk '/req_waittime/ {print $2}')
+ local num=$(get_mdc_stats $mdtidx ost_read)
+ local ra=$(get_mdc_stats $mdtidx req_active)
+ local rw=$(get_mdc_stats $mdtidx req_waittime)
[ $num -eq 1 ] || error "expect 1 READ RPC, $num occured"
[ $ra == $rw ] || error "$((ra - rw)) resend occured"
local max_blksz=$(do_facet ost1 \
$ZFS get -p recordsize $(facet_device ost1) |
awk '!/VALUE/{print $3}')
- local min_blksz=$(getconf PAGE_SIZE)
# to make life a little bit easier
$LFS mkdir -c 1 -i 0 $DIR/$tdir
# Get ZFS object id
local zfs_objid=$(zfs_oid_to_objid ost1 $oid)
+ # block size change by sequential overwrite
+ local bs
- # block size change by sequential over write
- local blksz
- for ((bs=$min_blksz; bs <= max_blksz; bs <<= 2)); do
+ for ((bs=$PAGE_SIZE; bs <= max_blksz; bs *= 4)) ; do
dd if=/dev/zero of=$tf bs=$bs count=1 oflag=sync conv=notrunc
- blksz=$(zfs_object_blksz ost1 $zfs_objid)
+ local blksz=$(zfs_object_blksz ost1 $zfs_objid)
[ $blksz -eq $bs ] || error "blksz error: $blksz, expected: $bs"
done
rm -f $tf
# block size change by sequential append write
- dd if=/dev/zero of=$tf bs=$min_blksz count=1 oflag=sync conv=notrunc
+ dd if=/dev/zero of=$tf bs=$PAGE_SIZE count=1 oflag=sync conv=notrunc
oid=$($LFS getstripe $tf | awk '/obdidx/{getline; print $2}')
zfs_objid=$(zfs_oid_to_objid ost1 $oid)
+ local count
- for ((count = 1; count < $((max_blksz / min_blksz)); count *= 2)); do
- dd if=/dev/zero of=$tf bs=$min_blksz count=$count seek=$count \
+ for ((count = 1; count < $((max_blksz / PAGE_SIZE)); count *= 2)); do
+ dd if=/dev/zero of=$tf bs=$PAGE_SIZE count=$count seek=$count \
oflag=sync conv=notrunc
blksz=$(zfs_object_blksz ost1 $zfs_objid)
- [ $blksz -eq $((2 * count * min_blksz)) ] ||
- error "blksz error, actual $blksz, " \
- "expected: 2 * $count * $min_blksz"
+ [ $blksz -eq $((2 * count * PAGE_SIZE)) ] ||
+ error "blksz error, actual $blksz, " \
+ "expected: 2 * $count * $PAGE_SIZE"
done
rm -f $tf
dd if=/dev/zero of=$tf bs=1K count=1 oflag=sync conv=notrunc
blksz=$(zfs_object_blksz ost1 $zfs_objid)
- [ $blksz -eq $min_blksz ] ||
- error "blksz error: $blksz, expected: $min_blksz"
+ [ $blksz -eq $PAGE_SIZE ] ||
+ error "blksz error: $blksz, expected: $PAGE_SIZE"
dd if=/dev/zero of=$tf bs=64K count=1 oflag=sync conv=notrunc seek=128
blksz=$(zfs_object_blksz ost1 $zfs_objid)
remote_ost_nodsh && skip "remote OST with nodsh"
local file=$DIR/$tfile
+
rm -f $file
$SETSTRIPE -c 1 -i 0 $file || error "setstripe failed"
# define OBD_FAIL_TGT_RCVD_EIO 0x720
do_facet ost1 "$LCTL set_param fail_loc=0x720"
- dd if=/dev/zero of=$file bs=4096 oflag=direct count=1 &&
+ dd if=/dev/zero of=$file bs=$PAGE_SIZE oflag=direct count=1 &&
error "write should failed"
do_facet ost1 "$LCTL set_param fail_loc=0"
rm -f $file
local file=$DIR/$tfile
rm -f $file
- $MULTIOP $file oO_CREAT:O_DIRECT:O_RDWR:w4096000c
- $MULTIOP $file oO_RDONLY:r4096000_c &
+ $MULTIOP $file oO_CREAT:O_DIRECT:O_RDWR:w4063232c ||
+ error "multiop file write failed"
+ $MULTIOP $file oO_RDONLY:r4063232_c &
PID=$!
sleep 2
run_test 407 "transaction fail should cause operation fail"
test_408() {
- dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1 oflag=direct
+ dd if=/dev/zero of=$DIR/$tfile bs=$PAGE_SIZE count=1 oflag=direct
#define OBD_FAIL_OSC_BRW_PREP_REQ2 0x40a
lctl set_param fail_loc=0x8000040a
echo 1M > $cgdir/memory.limit_in_bytes
# Should not LBUG, just be killed by oom-killer
- sh -c "echo \$$ > $cgdir/tasks && dd if=$DIR/$tfile of=/dev/null" &&
- error "fail to trigger a memory allocation error"
-
+ # dd will return 0 even allocation failure in some environment.
+ # So don't check return value
+ sh -c "echo \$$ > $cgdir/tasks && dd if=$DIR/$tfile of=/dev/null"
cleanup_test411_cgroup $cgdir
return 0
}
run_test 415 "lock revoke is not missing"
+
+test_416() {
+ [ $(lustre_version_code mds1) -lt $(version_code 2.11.55) ] &&
+ skip "Need server version at least 2.11.55"
+
+ # define OBD_FAIL_OSD_TXN_START 0x19a
+ do_facet mds1 lctl set_param fail_loc=0x19a
+
+ lfs mkdir -c $MDSCOUNT $DIR/$tdir
+
+ true
+}
+run_test 416 "transaction start failure won't cause system hung"
+
prep_801() {
[[ $(lustre_version_code mds1) -lt $(version_code 2.9.55) ]] ||
[[ $(lustre_version_code ost1) -lt $(version_code 2.9.55) ]] &&
}
run_test 807 "verify LSOM syncing tool"
+check_som_nologged()
+{
+ local lines=$($LFS changelog $FSNAME-MDT0000 |
+ grep 'x=trusted.som' | wc -l)
+ [ $lines -ne 0 ] && error "trusted.som xattr is logged in Changelogs"
+}
+
+test_808() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.55) ] &&
+ skip "Need MDS version at least 2.11.55" && return
+
+ # Registration step
+ changelog_register || error "changelog_register failed"
+
+ touch $DIR/$tfile || error "touch $tfile failed"
+ check_som_nologged
+
+ dd if=/dev/zero of=$DIR/$tfile bs=1048576 count=1 ||
+ error "write $tfile failed"
+ check_som_nologged
+
+ $TRUNCATE $DIR/$tfile 1234
+ check_som_nologged
+
+ $TRUNCATE $DIR/$tfile 1048576
+ check_som_nologged
+
+ # Deregistration step
+ changelog_deregister || error "changelog_deregister failed"
+}
+run_test 808 "Check trusted.som xattr not logged in Changelogs"
+
#
# tests that do cleanup/setup should be run at the end
#
git://git.whamcloud.com / fs / lustre-release.git / blobdiff