# bug number: LU-8411 LU-9054
ALWAYS_EXCEPT+=" 407 312"
+if $SHARED_KEY; then
+ # bug number: LU-14181 LU-14181
+ ALWAYS_EXCEPT+=" 64e 64f"
+fi
+
selinux_status=$(getenforce)
if [ "$selinux_status" != "Disabled" ]; then
# bug number:
if [ "$mds1_FSTYPE" = "zfs" ]; then
# bug number for skipped test:
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT "
+ ALWAYS_EXCEPT+=" "
# 13 (min)"
[ "$SLOW" = "no" ] && EXCEPT_SLOW="$EXCEPT_SLOW 51b"
fi
+if [ "$ost1_FSTYPE" = "zfs" ]; then
+ # bug number for skipped test: LU-1941 LU-1941 LU-1941 LU-1941
+ ALWAYS_EXCEPT+=" 130a 130b 130c 130d 130e 130f 130g"
+fi
+
# Get the SLES distro version
#
# Returns a version string that should only be used in comparing
}
run_test 31p "remove of open striped directory"
+test_31q() {
+ [ $MDSCOUNT -lt 3 ] && skip_env "needs >= 3 MDTs"
+
+ $LFS mkdir -i 3,1 $DIR/$tdir || error "mkdir failed"
+ index=$($LFS getdirstripe -i $DIR/$tdir)
+ [ $index -eq 3 ] || error "first stripe index $index != 3"
+ index=$($LFS getdirstripe $DIR/$tdir | tail -1 | awk '{print $1}')
+ [ $index -eq 1 ] || error "second stripe index $index != 1"
+
+ # when "-c <stripe_count>" is set, the number of MDTs specified after
+ # "-i" should equal to the stripe count
+ $LFS mkdir -i 3,1 -c 3 $DIR/$tdir.2 && error "mkdir should fail" || true
+}
+run_test 31q "create striped directory on specific MDTs"
+
cleanup_test32_mount() {
local rc=0
trap 0
local fm_file=$DIR/$tfile
$LFS setstripe -S 131072 -c 2 $fm_file || error "setstripe on $fm_file"
- [ "$(facet_fstype ost$(($($LFS getstripe -i $fm_file) + 1)))" = "zfs" ] &&
- skip_env "ORI-366/LU-1941: FIEMAP unimplemented on ZFS"
NUM_BLKS=512
EXPECTED_LEN=$(( (NUM_BLKS / 2) * 64 ))
- for ((i = 0; i < $NUM_BLKS; i++))
- do
- dd if=/dev/zero of=$fm_file count=1 bs=64k seek=$((2*$i)) conv=notrunc > /dev/null 2>&1
+ for ((i = 0; i < $NUM_BLKS; i++)); do
+ dd if=/dev/zero of=$fm_file count=1 bs=64k seek=$((2*$i)) \
+ conv=notrunc > /dev/null 2>&1
done
filefrag -ves $fm_file || error "filefrag $fm_file failed"
filefrag_op=$(filefrag -ve -k $fm_file |
sed -n '/ext:/,/found/{/ext:/d; /found/d; p}')
- last_lun=$(echo $filefrag_op | cut -d: -f5 |
- sed -e 's/^[ \t]*/0x/' | sed -e 's/0x0x/0x/')
+ last_lun=$(echo $filefrag_op | cut -d: -f5)
IFS=$'\n'
tot_len=0
num_luns=1
- for line in $filefrag_op
- do
- frag_lun=$(echo $line | cut -d: -f5 |
- sed -e 's/^[ \t]*/0x/' | sed -e 's/0x0x/0x/')
+ for line in $filefrag_op; do
+ frag_lun=$(echo $line | cut -d: -f5)
ext_len=$(echo $line | cut -d: -f4)
- if (( $frag_lun != $last_lun )); then
+ if [[ "$frag_lun" != "$last_lun" ]]; then
if (( tot_len != $EXPECTED_LEN )); then
cleanup_130
- error "FIEMAP on $fm_file failed; returned " \
- "len $tot_len for OST $last_lun instead " \
- "of $EXPECTED_LEN"
- return
+ error "OST$last_lun $tot_len != $EXPECTED_LEN"
else
(( num_luns += 1 ))
tot_len=0
done
if (( num_luns != 2 || tot_len != $EXPECTED_LEN )); then
cleanup_130
- error "FIEMAP on $fm_file failed; returned wrong number " \
- "of luns or wrong len for OST $last_lun"
- return
+ error "OST$last_lun $num_luns != 2, $tot_len != $EXPECTED_LEN"
fi
- cleanup_130
-
echo "FIEMAP with continuation calls succeeded"
}
run_test 130e "FIEMAP (test continuation FIEMAP calls)"
filefrag_extents=$(filefrag -vek $fm_file |
awk '/extents? found/ { print $2 }')
if [[ "$filefrag_extents" != "0" ]]; then
- error "FIEMAP on $fm_file failed; " \
- "returned $filefrag_extents expected 0"
+ error "$fm_file: filefrag_extents=$filefrag_extents != 0"
fi
rm -f $fm_file
}
run_test 130f "FIEMAP (unstriped file)"
+test_130g() {
+ local file=$DIR/$tfile
+ local nr=$((OSTCOUNT * 100))
+
+ $LFS setstripe -C $nr $file ||
+ error "failed to setstripe -C $nr $file"
+
+ dd if=/dev/zero of=$file count=$nr bs=1M
+ sync
+ nr=$($LFS getstripe -c $file)
+
+ local extents=$(filefrag -v $file |
+ sed -n '/ext:/,/found/{/ext:/d; /found/d; p}' | wc -l)
+
+ echo "filefrag list $extents extents in file with stripecount $nr"
+ if (( extents < nr )); then
+ $LFS getstripe $file
+ filefrag -v $file
+ error "filefrag printed $extents < $nr extents"
+ fi
+
+ rm -f $file
+}
+run_test 130g "FIEMAP (overstripe file)"
+
# Test for writev/readv
test_131a() {
rwv -f $DIR/$tfile -w -n 3 524288 1048576 1572864 ||
[ $OST1_VERSION -lt $(version_code 2.13.50) ] &&
skip "Need OST version at least 2.13.53"
- $LFS setstripe -c $OSTCOUNT -S1M $DIR/$tdir || error "setstripe failed"
- fallocate -l ${OSTCOUNT}m $DIR/$tdir || error "fallocate failed"
+ $LFS setstripe -c $OSTCOUNT -S1M $DIR/$tfile || error "setstripe failed"
+ fallocate -l ${OSTCOUNT}m $DIR/$tfile || error "fallocate failed"
sync; sync_all_data
cancel_lru_locks $OSC
sleep 5
- bytes=$(($(stat -c '%b * %B' $DIR/$tdir)))
+ bytes=$(($(stat -c '%b * %B' $DIR/$tfile)))
want=$((OSTCOUNT * 1048576))
# Must allocate all requested space, not more than 5% extra
(( $bytes >= $want && $bytes < $want * 105 / 100 )) ||
error "bytes $bytes is not $want"
+
+ rm -f $DIR/$tfile
+ # verify fallocate on PFL file
+ $LFS setstripe -E1M -c1 -E16M -c3 -Eeof -c 4 $DIR/$tfile ||
+ error "Create $DIR/$tfile failed"
+ fallocate -l $((1048576 * 1024)) $DIR/$tfile ||
+ error "fallocate failed"
+ sync; sync_all_data
+ cancel_lru_locks $OSC
+ sleep 5
+ bytes=$(($(stat -c '%b * %B' $DIR/$tfile)))
+ want=$((1024 * 1048576))
+
+ # Must allocate all requested space, not more than 5% extra
+ (( $bytes >= $want && $bytes < $want * 105 / 100 )) ||
+ error "bytes $bytes is not $want"
}
run_test 150c "Verify fallocate Size and Blocks"
[[ $offset == 1000000 ]] || error "offset $offset != 1000000"
printf "Seeking data from 1000000 ... "
lseek_test -d 1000000 $file && error "lseek should fail"
- # full first component, non-inited second one
+ rm $file
+
+ # full component followed by non-inited one
+ $LFS setstripe -E 1M -c2 -E eof $file
dd if=/dev/urandom of=$file bs=1M count=1
printf "Seeking hole from 1000000 ... "
offset=$(lseek_test -l 1000000 $file)
# init second component and truncate back
echo "123" >> $file
$TRUNCATE $file 1048576
- ls -lia $file
printf "Seeking hole from 1000000 ... "
offset=$(lseek_test -l 1000000 $file)
echo $offset
# open intent should update default EA size
# see mdc_update_max_ea_from_body()
# notice this is the very first RPC to MDS2
- cp /etc/services $DIR/$tdir/mds2 ||
- error "Failed to copy files to mds$n"
+ out=$(cp /etc/services $DIR/$tdir/mds2 2>&1)
+ ret=$?
+ echo $out
+ # With SSK, this situation can lead to -EPERM being returned.
+ # In that case, simply retry.
+ if [ $ret -ne 0 ] && $SHARED_KEY; then
+ if echo "$out" | grep -q "not permitted"; then
+ cp /etc/services $DIR/$tdir/mds2
+ ret=$?
+ fi
+ fi
+ [ $ret -eq 0 ] || error "Failed to copy files to mds$n"
}
run_test 820 "update max EA from open intent"
git://git.whamcloud.com / fs / lustre-release.git / blobdiff