DEF_STRIPE_COUNT=-1
CHECK_GRANT=${CHECK_GRANT:-"yes"}
GRANT_CHECK_LIST=${GRANT_CHECK_LIST:-""}
-export PARALLEL=${PARALLEL:-"no"}
TRACE=${TRACE:-""}
LUSTRE=${LUSTRE:-$(dirname $0)/..}
if $SHARED_KEY; then
always_except LU-14181 64e 64f
+ always_except LU-15910 413g
fi
# skip the grant tests for ARM until they are fixed
if [[ $(uname -m) = aarch64 ]]; then
always_except LU-11671 45
- always_except LU-14067 400a 400b
fi
# skip nfs tests on kernels >= 4.12.0 until they are fixed
$DIR/$tdir/${tdir}2 ||
error "$DIR/$tdir/${tdir}2: create failed"
+ $LFS getdirstripe -v $DIR/$tdir/${tdir}2
+
$LFS getdirstripe -v $DIR/$tdir/${tdir}2 |
grep "lfm_magic:.*0x0CD50CD0" ||
error "$DIR/$tdir/${tdir}2: invalid LMV EA magic"
remote_mds_nodsh && skip "remote MDS with nodsh"
[[ $OSTCOUNT -lt 2 ]] && skip_env "need > 1 OST"
- test_mkdir $DIR/$tdir
-
# Set default striping on directory
local setcount=4
local stripe_opt
+ local mdts=$(comma_list $(mdts_nodes))
# if we run against a 2.12 server which lacks overstring support
# then the connect_flag will not report overstriping, even if client
else
skip "server does not support overstriping"
fi
+
+ test_mkdir $DIR/$tdir
+
+ # Validate existing append_* params and ensure restore
+ local pool=$(do_facet mds1 $LCTL get_param -n mdd.$FSNAME-MDT0000.append_pool)
+ [[ "$pool" == "" ]] || error "expected append_pool == '', got '$pool'"
+ stack_trap "do_nodes $mdts $LCTL set_param mdd.*.append_pool=none"
+
+ local orig_count=$(do_facet mds1 $LCTL get_param -n mdd.$FSNAME-MDT0000.append_stripe_count)
+ ((orig_count == 1)) || error "expected append_stripe_count == 1, got $orig_count"
+ stack_trap "do_nodes $mdts $LCTL set_param mdd.*.append_stripe_count=1"
+
$LFS setstripe $stripe_opt $DIR/$tdir
echo 1 > $DIR/$tdir/${tfile}.1
[ $count -eq $setcount ] ||
error "(1) stripe count $count, should be $setcount"
- # Capture existing append_stripe_count setting for restore
- local orig_count=$(do_facet mds1 $LCTL get_param -n mdd.$FSNAME-MDT0000.append_stripe_count)
- local mdts=$(comma_list $(mdts_nodes))
- stack_trap "do_nodes $mdts $LCTL set_param mdd.*.append_stripe_count=$orig_count" EXIT
-
local appendcount=$orig_count
echo 1 >> $DIR/$tdir/${tfile}.2_append
count=$($LFS getstripe -c $DIR/$tdir/${tfile}.2_append)
error "(9) stripe count $count, should be $appendcount for append"
# Now test O_APPEND striping with pools
- do_nodes $mdts $LCTL set_param mdd.*.append_pool="$TESTNAME"
- stack_trap "do_nodes $mdts $LCTL set_param mdd.*.append_pool='none'" EXIT
-
- # Create the pool
pool_add $TESTNAME || error "pool creation failed"
pool_add_targets $TESTNAME 0 1 || error "Pool add targets failed"
+ do_nodes $mdts $LCTL set_param mdd.*.append_pool="$TESTNAME"
echo 1 >> $DIR/$tdir/${tfile}.10_append
--flags=0xda05 --mode 0750 $DIR/$tdir/${tdir} ||
error "$DIR/$tdir/${tdir}: create failed"
+ $LFS getdirstripe -v $DIR/$tdir/${tdir}
+
$LFS getdirstripe -v $DIR/$tdir/${tdir} |
grep "lfm_magic:.*0x0CD50CD0" ||
error "$DIR/$tdir/${tdir}: invalid LMV EA magic"
}
run_test 27T "no eio on close on partial write due to enosp"
+test_27U() {
+ local dir=$DIR/$tdir
+ local file=$dir/$tfile
+ local append_pool=${TESTNAME}-append
+ local normal_pool=${TESTNAME}-normal
+ local pool
+ local stripe_count
+ local stripe_count2
+ local mdts=$(comma_list $(mdts_nodes))
+
+ # FIMXE
+ # (( $MDS1_VERSION >= $(version_code 2.15.42) )) ||
+ # skip "Need MDS version at least 2.15.42"
+
+ # Validate existing append_* params and ensure restore
+ pool=$(do_facet mds1 $LCTL get_param -n mdd.$FSNAME-MDT0000.append_pool)
+ [[ "$pool" == "" ]] || error "expected append_pool == '', got '$pool'"
+ stack_trap "do_nodes $mdts $LCTL set_param mdd.*.append_pool=none"
+
+ stripe_count=$(do_facet mds1 $LCTL get_param -n mdd.$FSNAME-MDT0000.append_stripe_count)
+ ((stripe_count == 1)) || error "expected append_stripe_count != 0, got $stripe_count"
+ stack_trap "do_nodes $mdts $LCTL set_param mdd.*.append_stripe_count=$stripe_count"
+
+ pool_add $append_pool || error "pool creation failed"
+ pool_add_targets $append_pool 0 1 || error "Pool add targets failed"
+
+ pool_add $normal_pool || error "pool creation failed"
+ pool_add_targets $normal_pool 0 1 || error "Pool add targets failed"
+
+ test_mkdir $dir
+ $LFS setstripe -E 1M -c 1 -p $normal_pool -E 2M -c 2 -p $normal_pool -E eof -c -1 $dir
+
+ echo XXX >> $file.1
+ $LFS getstripe $file.1
+
+ pool=$($LFS getstripe -p $file.1)
+ [[ "$pool" == "$normal_pool" ]] || error "got pool '$pool', expected '$normal_pool'"
+
+ stripe_count2=$($LFS getstripe -c $file.1)
+ ((stripe_count2 == stripe_count)) ||
+ error "got stripe_count '$stripe_count2', expected '$stripe_count'"
+
+ do_nodes $mdts $LCTL set_param mdd.*.append_pool=$append_pool
+
+ echo XXX >> $file.2
+ $LFS getstripe $file.2
+
+ pool=$($LFS getstripe -p $file.2)
+ [[ "$pool" == "$append_pool" ]] || error "got pool '$pool', expected '$append_pool'"
+
+ do_nodes $mdts $LCTL set_param mdd.*.append_stripe_count=2
+
+ echo XXX >> $file.3
+ $LFS getstripe $file.3
+
+ stripe_count2=$($LFS getstripe -c $file.3)
+ ((stripe_count2 == 2)) || error "got stripe_count '$stripe_count2', expected 2"
+}
+run_test 27U "append pool and stripe count work with composite default layout"
+
# createtest also checks that device nodes are created and
# then visible correctly (#2091)
test_28() { # bug 2091
}
run_test 33g "nonroot user create already existing root created file"
-test_33h() {
- [ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $MDS1_VERSION -lt $(version_code 2.13.50) ] &&
- skip "Need MDS version at least 2.13.50"
+sub_33h() {
+ local hash_type=$1
+ local count=250
- test_mkdir -c $MDSCOUNT -H crush $DIR/$tdir ||
- error "mkdir $tdir failed"
+ test_mkdir -c $MDSCOUNT -H $hash_type $DIR/$tdir ||
+ error "lfs mkdir -H $hash_type $tdir failed"
touch $DIR/$tdir/$tfile || error "touch $tfile failed"
local index=$($LFS getstripe -m $DIR/$tdir/$tfile)
local index2
+ local fname
for fname in $DIR/$tdir/$tfile.bak \
$DIR/$tdir/$tfile.SAV \
$DIR/$tdir/$tfile.orig \
$DIR/$tdir/$tfile~; do
- touch $fname || error "touch $fname failed"
+ touch $fname || error "touch $fname failed"
index2=$($LFS getstripe -m $fname)
- [ $index -eq $index2 ] ||
+ (( $index == $index2 )) ||
error "$fname MDT index mismatch $index != $index2"
done
local failed=0
- for i in {1..250}; do
- for fname in $(mktemp -u $DIR/$tdir/.$tfile.XXXXXX) \
- $(mktemp $DIR/$tdir/$tfile.XXXXXXXX); do
- touch $fname || error "touch $fname failed"
+ local patterns=(".$tfile.XXXXXX" "$tfile.XXXXXXXX")
+ local pattern
+
+ for pattern in ${patterns[*]}; do
+ echo "pattern $pattern"
+ fname=$DIR/$tdir/$pattern
+ for (( i = 0; i < $count; i++ )); do
+ fname=$(mktemp $DIR/$tdir/$pattern) ||
+ error "mktemp $DIR/$tdir/$pattern failed"
index2=$($LFS getstripe -m $fname)
- if [[ $index != $index2 ]]; then
- failed=$((failed + 1))
- echo "$fname MDT index mismatch $index != $index2"
- fi
+ (( $index == $index2 )) && continue
+
+ failed=$((failed + 1))
+ echo "$fname MDT index mismatch $index != $index2"
+ done
+ done
+
+ echo "$failed/$count MDT index mismatches, expect ~2-4"
+ (( failed < 10 )) || error "MDT index mismatch $failed/$count times"
+
+ local same=0
+ local expect
+
+ # verify that "crush" is still broken with all files on same MDT,
+ # crush2 should have about 1/MDSCOUNT files on each MDT, with margin
+ [[ "$hash_type" == "crush" ]] && expect=$count ||
+ expect=$((count / MDSCOUNT))
+
+ # crush2 doesn't put all-numeric suffixes on the same MDT,
+ # filename like $tfile.12345678 should *not* be considered temp
+ for pattern in ${patterns[*]}; do
+ local base=${pattern%%X*}
+ local suff=${pattern#$base}
+
+ echo "pattern $pattern"
+ for (( i = 0; i < $count; i++ )); do
+ fname=$DIR/$tdir/$base$((${suff//X/1} + i))
+ touch $fname || error "touch $fname failed"
+ index2=$($LFS getstripe -m $fname)
+ (( $index != $index2 )) && continue
+
+ same=$((same + 1))
+ done
+ done
+
+ echo "$((same/${#patterns[*]}))/$count matches, expect ~$expect for $1"
+ (( same / ${#patterns[*]} < expect * 5 / 4 &&
+ same / ${#patterns[*]} > expect * 4 / 5 )) ||
+ error "MDT index match $((same / ${#patterns[*]}))/$count times"
+ same=0
+
+ # crush2 doesn't put suffixes with special characters on the same MDT
+ # filename like $tfile.txt.1234 should *not* be considered temp
+ for pattern in ${patterns[*]}; do
+ local base=${pattern%%X*}
+ local suff=${pattern#$base}
+
+ pattern=$base...${suff/XXX}
+ echo "pattern=$pattern"
+ for (( i = 0; i < $count; i++ )); do
+ fname=$(mktemp $DIR/$tdir/$pattern) ||
+ error "touch $fname failed"
+ index2=$($LFS getstripe -m $fname)
+ (( $index != $index2 )) && continue
+
+ same=$((same + 1))
done
done
- echo "$failed MDT index mismatches"
- (( failed < 20 )) || error "MDT index mismatch $failed times"
+ echo "$((same/${#patterns[*]}))/$count matches, expect ~$expect for $1"
+ (( same / ${#patterns[*]} < expect * 5 / 4 &&
+ same / ${#patterns[*]} > expect * 4 / 5 )) ||
+ error "MDT index match $((same / ${#patterns[*]}))/$count times"
}
-run_test 33h "temp file is located on the same MDT as target"
+
+test_33h() {
+ (( $MDSCOUNT >= 2 )) || skip "needs >= 2 MDTs"
+ (( $MDS1_VERSION >= $(version_code 2.13.50) )) ||
+ skip "Need MDS version at least 2.13.50"
+
+ sub_33h crush
+}
+run_test 33h "temp file is located on the same MDT as target (crush)"
+
+test_33hh() {
+ (( $MDSCOUNT >= 2 )) || skip "needs >= 2 MDTs"
+ echo "MDS1_VERSION=$MDS1_VERSION version_code=$(version_code 2.15.0)"
+ (( $MDS1_VERSION > $(version_code 2.15.0) )) ||
+ skip "Need MDS version at least 2.15.0 for crush2"
+
+ sub_33h crush2
+}
+run_test 33hh "temp file is located on the same MDT as target (crush2)"
test_33i()
{
}
run_test 51b "exceed 64k subdirectory nlink limit on create, verify unlink"
-test_51d() {
- [ $PARALLEL == "yes" ] && skip "skip parallel run"
- [[ $OSTCOUNT -lt 3 ]] && skip_env "needs >= 3 OSTs"
- local qos_old
-
- test_mkdir $DIR/$tdir
- $LFS setstripe -c $OSTCOUNT $DIR/$tdir
-
- qos_old=$(do_facet mds1 \
- "$LCTL get_param -n lod.$FSNAME-*.qos_threshold_rr" | head -n 1)
- do_nodes $(comma_list $(mdts_nodes)) \
- "$LCTL set_param lod.$FSNAME-*.qos_threshold_rr=100"
- stack_trap "do_nodes $(comma_list $(mdts_nodes)) \
- '$LCTL set_param lod.$FSNAME-*.qos_threshold_rr=${qos_old%%%}'"
+test_51d_sub() {
+ local stripecount=$1
+ local nfiles=$((200 * $OSTCOUNT))
- createmany -o $DIR/$tdir/t- 1000
+ log "create files with stripecount=$stripecount"
+ $LFS setstripe -C $stripecount $DIR/$tdir
+ createmany -o $DIR/$tdir/t- $nfiles
$LFS getstripe $DIR/$tdir > $TMP/$tfile
for ((n = 0; n < $OSTCOUNT; n++)); do
objs[$n]=$(awk -vobjs=0 '($1 == '$n') { objs += 1 } \
END { printf("%0.0f", objs) }')
log "OST$n has ${objs[$n]} objects, ${objs0[$n]} are index 0"
done
- unlinkmany $DIR/$tdir/t- 1000
-
- nlast=0
- for ((n = 0; n < $OSTCOUNT; n++)); do
+ unlinkmany $DIR/$tdir/t- $nfiles
+ rm -f $TMP/$tfile
+
+ local nlast
+ local min=4
+ local max=6 # allow variance of (1 - $min/$max) = 33% by default
+
+ # For some combinations of stripecount and OSTCOUNT current code
+ # is not ideal, and allocates 50% fewer *first* objects to some OSTs
+ # than others. Rather than skipping this test entirely, check that
+ # and keep testing to ensure imbalance does not get worse. LU-15282
+ (( (OSTCOUNT == 6 && stripecount == 4) ||
+ (OSTCOUNT == 10 && (stripecount == 4 || stripecount == 8)) ||
+ (OSTCOUNT == 12 && (stripecount == 8 || stripecount == 9)))) && max=9
+ for ((nlast=0, n = 1; n < $OSTCOUNT; nlast=n,n++)); do
(( ${objs[$n]} > ${objs[$nlast]} * 4 / 5 )) ||
{ $LFS df && $LFS df -i &&
- error "OST $n has fewer objects vs. OST $nlast" \
- " (${objs[$n]} < ${objs[$nlast]}"; }
+ error "OST $n has fewer objects vs. OST $nlast " \
+ "(${objs[$n]} < ${objs[$nlast]} x 4/5)"; }
(( ${objs[$n]} < ${objs[$nlast]} * 5 / 4 )) ||
{ $LFS df && $LFS df -i &&
- error "OST $n has fewer objects vs. OST $nlast" \
- " (${objs[$n]} < ${objs[$nlast]}"; }
+ error "OST $n has fewer objects vs. OST $nlast " \
+ "(${objs[$n]} > ${objs[$nlast]} x 5/4)"; }
- (( ${objs0[$n]} > ${objs0[$nlast]} * 4 / 5 )) ||
+ (( ${objs0[$n]} > ${objs0[$nlast]} * $min / $max )) ||
{ $LFS df && $LFS df -i &&
- error "OST $n has fewer #0 objects vs. OST $nlast" \
- " (${objs0[$n]} < ${objs0[$nlast]}"; }
- (( ${objs0[$n]} < ${objs0[$nlast]} * 5 / 4 )) ||
+ error "OST $n has fewer #0 objects vs. OST $nlast " \
+ "(${objs0[$n]} < ${objs0[$nlast]} x $min/$max)"; }
+ (( ${objs0[$n]} < ${objs0[$nlast]} * $max / $min )) ||
{ $LFS df && $LFS df -i &&
- error "OST $n has fewer #0 objects vs. OST $nlast" \
- " (${objs0[$n]} < ${objs0[$nlast]}"; }
- nlast=$n
+ error "OST $n has fewer #0 objects vs. OST $nlast " \
+ "(${objs0[$n]} > ${objs0[$nlast]} x $max/$min)"; }
+ done
+}
+
+test_51d() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run"
+ [[ $OSTCOUNT -lt 3 ]] && skip_env "needs >= 3 OSTs"
+
+ local stripecount
+ local qos_old=$(do_facet mds1 \
+ "$LCTL get_param -n lod.$FSNAME-*.qos_threshold_rr" | head -n 1)
+
+ do_nodes $(comma_list $(mdts_nodes)) \
+ "$LCTL set_param lod.$FSNAME-*.qos_threshold_rr=100"
+ stack_trap "do_nodes $(comma_list $(mdts_nodes)) \
+ '$LCTL set_param lod.$FSNAME-*.qos_threshold_rr=${qos_old%%%}'"
+
+ test_mkdir $DIR/$tdir
+
+ for ((stripecount = 3; stripecount <= $OSTCOUNT; stripecount++)); do
+ test_51d_sub $stripecount
done
}
run_test 51d "check object distribution"
run_test 64g "grant shrink on MDT"
test_64h() {
+ (( $OST1_VERSION >= $(version_code 2.14.56) )) ||
+ skip "need OST at least 2.14.56 to avoid grant shrink on read"
+
local instance=$($LFS getname -i $DIR)
local osc_tgt="$FSNAME-OST0000-osc-$instance"
local num_exps=$(do_facet ost1 \
run_test 64h "grant shrink on read"
test_64i() {
- (( $OST1_VERSION >= $(version_code 2.14.55) )) ||
- skip "need OST at least 2.14.55 to avoid grant shrink on replay"
+ (( $OST1_VERSION >= $(version_code 2.14.56) )) ||
+ skip "need OST at least 2.14.56 to avoid grant shrink on replay"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
remote_ost_nodsh && skip "remote OSTs with nodsh"
echo "Before recordsize change"
lfs_df=($($LFS df -h | grep "filesystem_summary:"))
- df=($(df -h | grep "/mnt/lustre"$))
+ df=($(df -h | grep "$MOUNT"$))
# For checking.
echo "lfs output : ${lfs_df[*]}"
echo "After recordsize change"
lfs_df_after=($($LFS df -h | grep "filesystem_summary:"))
- df_after=($(df -h | grep "/mnt/lustre"$))
+ df_after=($(df -h | grep "$MOUNT"$))
# For checking.
echo "lfs output : ${lfs_df_after[*]}"
}
run_test 115 "verify dynamic thread creation===================="
-free_min_max () {
- wait_delete_completed
- AVAIL=($(lctl get_param -n osc.*[oO][sS][cC]-[^M]*.kbytesavail))
- echo "OST kbytes available: ${AVAIL[*]}"
- MAXV=${AVAIL[0]}
- MAXI=0
- MINV=${AVAIL[0]}
- MINI=0
- for ((i = 0; i < ${#AVAIL[@]}; i++)); do
- #echo OST $i: ${AVAIL[i]}kb
- if [[ ${AVAIL[i]} -gt $MAXV ]]; then
- MAXV=${AVAIL[i]}
- MAXI=$i
- fi
- if [[ ${AVAIL[i]} -lt $MINV ]]; then
- MINV=${AVAIL[i]}
- MINI=$i
- fi
- done
- echo "Min free space: OST $MINI: $MINV"
- echo "Max free space: OST $MAXI: $MAXV"
-}
-
test_116a() { # was previously test_116()
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs"
log "testing UP system. Performance may be lower than expected."
SLOWOK=1
fi
+ running_in_vm && SLOWOK=1
rm -rf $DIR/$tdir
test_mkdir $DIR/$tdir
}
run_test 171 "test libcfs_debug_dumplog_thread stuck in do_exit() ======"
+test_172() {
+
+ #define OBD_FAIL_OBD_CLEANUP 0x60e
+ $LCTL set_param fail_loc=0x60e
+ umount $MOUNT || error "umount $MOUNT failed"
+ stack_trap "mount_client $MOUNT"
+
+ (( $($LCTL dl | egrep -c " osc | lov | lmv | mdc ") > 0 )) ||
+ error "no client OBDs are remained"
+
+ $LCTL dl | while read devno state type name foo; do
+ case $type in
+ lov|osc|lmv|mdc)
+ $LCTL --device $name cleanup
+ $LCTL --device $name detach
+ ;;
+ *)
+ # skip server devices
+ ;;
+ esac
+ done
+
+ if (( $($LCTL dl | egrep -c " osc | lov | lmv | mdc ") > 0 )); then
+ $LCTL dl | egrep " osc | lov | lmv | mdc "
+ error "some client OBDs are still remained"
+ fi
+
+}
+run_test 172 "manual device removal with lctl cleanup/detach ======"
+
# it would be good to share it with obdfilter-survey/iokit-libecho code
setup_obdecho_osc () {
local rc=0
}
test_180a() {
- [ $PARALLEL == "yes" ] && skip "skip parallel run"
-
- if ! [ -d /sys/fs/lustre/echo_client ] &&
- ! module_loaded obdecho; then
- load_module obdecho/obdecho &&
- stack_trap "rmmod obdecho" EXIT ||
- error "unable to load obdecho on client"
- fi
-
- local osc=$($LCTL dl | grep -v mdt | awk '$3 == "osc" {print $4; exit}')
- local host=$($LCTL get_param -n osc.$osc.import |
- awk '/current_connection:/ { print $2 }' )
- local target=$($LCTL get_param -n osc.$osc.import |
- awk '/target:/ { print $2 }' )
- target=${target%_UUID}
-
- if [ -n "$target" ]; then
- setup_obdecho_osc $host $target &&
- stack_trap "cleanup_obdecho_osc $target" EXIT ||
- { error "obdecho setup failed with $?"; return; }
-
- obdecho_test ${target}_osc client ||
- error "obdecho_test failed on ${target}_osc"
- else
- $LCTL get_param osc.$osc.import
- error "there is no osc.$osc.import target"
- fi
+ skip "obdecho on osc is no longer supported"
}
run_test 180a "test obdecho on osc"
}
run_test 181 "Test open-unlinked dir ========================"
-test_182() {
+test_182a() {
local fcount=1000
local tcount=10
rm -rf $DIR/$tdir
}
-run_test 182 "Test parallel modify metadata operations ================"
+run_test 182a "Test parallel modify metadata operations from mdc"
+
+test_182b() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ local dcount=1000
+ local tcount=10
+ local stime
+ local etime
+ local delta
+
+ do_facet mds1 $LCTL list_param \
+ osp.$FSNAME-MDT*-osp-MDT*.rpc_stats ||
+ skip "MDS lacks parallel RPC handling"
+
+ $LFS mkdir -i 0 $DIR/$tdir || error "creating dir $DIR/$tdir"
+
+ rpc_count=$(do_facet mds1 $LCTL get_param -n \
+ osp.$FSNAME-MDT0001-osp-MDT0000.max_mod_rpcs_in_flight)
+
+ stime=$(date +%s)
+ createmany -i 0 -d $DIR/$tdir/t- $tcount
+
+ for (( i = 0; i < $tcount; i++ )) ; do
+ createmany -i 0 -d $DIR/$tdir/t-$i/d- 0 $dcount &
+ done
+ wait
+ etime=$(date +%s)
+ delta=$((etime - stime))
+ echo "Time for file creation $delta sec for $rpc_count parallel RPCs"
+
+ stime=$(date +%s)
+ for (( i = 0; i < $tcount; i++ )) ; do
+ unlinkmany -d $DIR/$tdir/$i/d- $dcount &
+ done
+ wait
+ etime=$(date +%s)
+ delta=$((etime - stime))
+ echo "Time for file removal $delta sec for $rpc_count parallel RPCs"
+
+ rm -rf $DIR/$tdir
+
+ $LFS mkdir -i 0 $DIR/$tdir || error "creating dir $DIR/$tdir"
+
+ do_facet mds1 $LCTL set_param osp.$FSNAME-MDT0001-osp-MDT0000.max_mod_rpcs_in_flight=1
+
+ stime=$(date +%s)
+ createmany -i 0 -d $DIR/$tdir/t- $tcount
+
+ for (( i = 0; i < $tcount; i++ )) ; do
+ createmany -i 0 -d $DIR/$tdir/t-$i/d- 0 $dcount &
+ done
+ wait
+ etime=$(date +%s)
+ delta=$((etime - stime))
+ echo "Time for file creation $delta sec for 1 RPC sent at a time"
+
+ stime=$(date +%s)
+ for (( i = 0; i < $tcount; i++ )) ; do
+ unlinkmany -d $DIR/$tdir/t-$i/d- $dcount &
+ done
+ wait
+ etime=$(date +%s)
+ delta=$((etime - stime))
+ echo "Time for file removal $delta sec for 1 RPC sent at a time"
+
+ do_facet mds1 $LCTL set_param osp.$FSNAME-MDT0001-osp-MDT0000.max_mod_rpcs_in_flight=$rpc_count
+}
+run_test 182b "Test parallel modify metadata operations from osp"
test_183() { # LU-2275
[ $PARALLEL == "yes" ] && skip "skip parallel run"
(( $MDS1_VERSION >= $(version_code 2.13.54.91) )) ||
skip "Need MDS version at least 2.13.54.91"
- job_stats="mdt.*.job_stats"
- $LCTL set_param $job_stats=clear
+ local job_stats="mdt.*.job_stats"
+ local old_jobid=$(do_facet mds1 $LCTL get_param jobid_var)
+
+ do_facet mds1 $LCTL set_param $job_stats=clear
+
# Setting jobid_var to USER might not be supported
+ [[ -n "$old_jobid" ]] && stack_trap "$LCTL set_param $old_jobid"
$LCTL set_param jobid_var=USER || true
- $LCTL set_param jobid_name="%e.%u"
+ stack_trap "$LCTL set_param $($LCTL get_param jobid_name)"
+ $LCTL set_param jobid_name="%j.%e.%u"
+
env -i USERTESTJOBSTATS=foolish touch $DIR/$tfile.1
- do_facet $SINGLEMDS $LCTL get_param $job_stats |
- grep "job_id:.*foolish" &&
- error "Unexpected jobid found"
- do_facet $SINGLEMDS $LCTL get_param $job_stats |
- grep "open:.*min.*max.*sum" ||
- error "wrong job_stats format found"
+ do_facet mds1 $LCTL get_param $job_stats | grep "job_id:.*foolish" &&
+ { do_facet mds1 $LCTL get_param $job_stats;
+ error "Unexpected jobid found"; }
+ do_facet mds1 $LCTL get_param $job_stats | grep "open:.*min.*max.*sum"||
+ { do_facet mds1 $LCTL get_param $job_stats;
+ error "wrong job_stats format found"; }
+
+ (( $MDS1_VERSION <= $(version_code 2.15.0) )) &&
+ echo "MDS does not yet escape jobid" && return 0
+ $LCTL set_param jobid_var=TEST205b
+ env -i TEST205b="has sp" touch $DIR/$tfile.2
+ do_facet mds1 $LCTL get_param $job_stats | grep "has.*x20sp" ||
+ { do_facet mds1 $LCTL get_param $job_stats;
+ error "jobid not escaped"; }
}
run_test 205b "Verify job stats jobid and output format"
}
run_test 244b "multi-threaded write with group lock"
-test_245() {
+test_245a() {
local flagname="multi_mod_rpcs"
local connect_data_name="max_mod_rpcs"
local out
echo "$out" | grep -qw $connect_data_name ||
error "import should have connect data $connect_data_name"
}
-run_test 245 "check mdc connection flag/data: multiple modify RPCs"
+run_test 245a "check mdc connection flag/data: multiple modify RPCs"
+
+test_245b() {
+ local flagname="multi_mod_rpcs"
+ local connect_data_name="max_mod_rpcs"
+ local out
+
+ remote_mds_nodsh && skip "remote MDS with nodsh"
+ [[ $MDSCOUNT -ge 2 ]] || skip "needs >= 2 MDTs"
+
+ # check if multiple modify RPCs flag is set
+ out=$(do_facet mds1 \
+ $LCTL get_param osp.$FSNAME-MDT0001-osp-MDT0000.import |
+ grep "connect_flags:")
+ echo "$out"
+
+ [[ "$out" =~ $flagname ]] || skip "connect flag $flagname is not set"
+
+ # check if multiple modify RPCs data is set
+ out=$(do_facet mds1 \
+ $LCTL get_param osp.$FSNAME-MDT0001-osp-MDT0000.import)
+
+ [[ "$out" =~ $connect_data_name ]] ||
+ {
+ echo "$out"
+ error "missing connect data $connect_data_name"
+ }
+}
+run_test 245b "check osp connection flag/data: multiple modify RPCs"
cleanup_247() {
local submount=$1
run_test 300h "check default striped directory for striped directory"
test_300i() {
- [ $PARALLEL == "yes" ] && skip "skip parallel run"
- [ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $MDS1_VERSION -lt $(version_code 2.7.55) ] &&
+ [[ $PARALLEL == "yes" ]] && skip "skip parallel run"
+ (( $MDSCOUNT >= 2 )) || skip_env "needs >= 2 MDTs"
+ (( $MDS1_VERSION >= $(version_code 2.7.55) )) ||
skip "Need MDS version at least 2.7.55"
local stripe_count
$LFS find -H fnv_1a_64,crush $DIR/$tdir/hashdir
local dircnt=$($LFS find -H fnv_1a_64,crush $DIR/$tdir/hashdir | wc -l)
- [ $dircnt -eq 2 ] || error "lfs find striped dir got:$dircnt,except:1"
-
- #set the stripe to be unknown hash type
- #define OBD_FAIL_UNKNOWN_LMV_STRIPE 0x1901
- $LCTL set_param fail_loc=0x1901
+ (( $dircnt == 2 )) || error "lfs find striped dir got $dircnt != 2"
+
+ if (( $MDS1_VERSION > $(version_code 2.15.0) )); then
+ $LFS mkdir -i0 -c$MDSCOUNT -H crush2 $DIR/$tdir/hashdir/d3 ||
+ error "create crush2 dir $tdir/hashdir/d3 failed"
+ $LFS find -H crush2 $DIR/$tdir/hashdir
+ dircnt=$($LFS find -H crush2 $DIR/$tdir/hashdir | wc -l)
+ (( $dircnt == 1 )) || error "find crush2 dir got $dircnt != 1"
+
+ # mkdir with an invalid hash type (hash=fail_val) from client
+ # should be replaced on MDS with a valid (default) hash type
+ #define OBD_FAIL_LMV_UNKNOWN_STRIPE 0x1901
+ $LCTL set_param fail_loc=0x1901 fail_val=99
+ $LFS mkdir -c2 $DIR/$tdir/hashdir/d99
+
+ local hash=$($LFS getdirstripe -H $DIR/$tdir/hashdir/d99)
+ local expect=$(do_facet mds1 \
+ $LCTL get_param -n lod.$FSNAME-MDT0000-mdtlov.mdt_hash)
+ [[ $hash == $expect ]] ||
+ error "d99 hash '$hash' != expected hash '$expect'"
+ fi
+
+ #set the stripe to be unknown hash type on read
+ #define OBD_FAIL_LMV_UNKNOWN_STRIPE 0x1901
+ $LCTL set_param fail_loc=0x1901 fail_val=99
for ((i = 0; i < 10; i++)); do
$CHECKSTAT -t file $DIR/$tdir/striped_dir/f-$i ||
error "stat f-$i failed"
test_398b() { # LU-4198
which fio || skip_env "no fio installed"
- $LFS setstripe -c -1 $DIR/$tfile
+ $LFS setstripe -c -1 -S 1M $DIR/$tfile
- local size=12
+ local size=48
dd if=/dev/zero of=$DIR/$tfile bs=1M count=$size
local njobs=4
- echo "mix direct rw ${size}M to OST0 by fio with $njobs jobs..."
- fio --name=rand-rw --rw=randrw --bs=$PAGE_SIZE --direct=1 \
- --numjobs=$njobs --fallocate=none \
- --iodepth=16 --allow_file_create=0 --size=$((size/njobs))M \
- --filename=$DIR/$tfile &
- bg_pid=$!
-
- echo "mix buffer rw ${size}M to OST0 by fio with $njobs jobs..."
- fio --name=rand-rw --rw=randrw --bs=$PAGE_SIZE \
- --numjobs=$njobs --fallocate=none \
- --iodepth=16 --allow_file_create=0 --size=$((size/njobs))M \
- --filename=$DIR/$tfile || true
- wait $bg_pid
+ # Single page, multiple pages, stripe size, 4*stripe size
+ for bsize in $(( $PAGE_SIZE )) $(( 4*$PAGE_SIZE )) 1048576 4194304; do
+ echo "mix direct rw ${bsize} by fio with $njobs jobs..."
+ fio --name=rand-rw --rw=randrw --bs=$bsize --direct=1 \
+ --numjobs=$njobs --fallocate=none \
+ --iodepth=16 --allow_file_create=0 --size=$((size/njobs))M \
+ --filename=$DIR/$tfile &
+ bg_pid=$!
+
+ echo "mix buffer rw ${bsize} by fio with $njobs jobs..."
+ fio --name=rand-rw --rw=randrw --bs=$bsize \
+ --numjobs=$njobs --fallocate=none \
+ --iodepth=16 --allow_file_create=0 --size=$((size/njobs))M \
+ --filename=$DIR/$tfile || true
+ wait $bg_pid
+ done
+
+ evict=$(do_facet client $LCTL get_param \
+ osc.$FSNAME-OST*-osc-*/state |
+ awk -F"[ [,]" '/EVICTED ]$/ { if (t<$5) {t=$5;} } END { print t }')
+
+ [ -z "$evict" ] || [[ $evict -le $before ]] ||
+ (do_facet client $LCTL get_param \
+ osc.$FSNAME-OST*-osc-*/state;
+ error "eviction happened: $evict before:$before")
rm -f $DIR/$tfile
}
}
run_test 413e "check default max-inherit value"
-test_413f() {
- (( MDSCOUNT >= 2 )) || skip "We need at least 2 MDTs for this test"
-
- (( MDS1_VERSION >= $(version_code 2.14.55) )) ||
- skip "Need server version at least 2.14.55"
-
- getfattr -d -m trusted.dmv --absolute-names $DIR > $TMP/dmv.ea ||
- error "dump $DIR default LMV failed"
- stack_trap "setfattr --restore=$TMP/dmv.ea"
-
- $LFS setdirstripe -D -i -1 -c 1 -X 3 --max-inherit-rr 3 $DIR ||
- error "set $DIR default LMV failed"
-
+test_fs_dmv_inherit()
+{
local testdir=$DIR/$tdir
local count
local inherit
local inherit_rr
- for i in $(seq 3); do
+ for i in 1 2 3; do
mkdir $testdir || error "mkdir $testdir failed"
count=$($LFS getdirstripe -D -c $testdir)
(( count == 1 )) ||
(( count == 0 )) ||
error "$testdir default LMV count not zero: $count"
}
+
+test_413f() {
+ (( MDSCOUNT >= 2 )) || skip "We need at least 2 MDTs for this test"
+
+ (( MDS1_VERSION >= $(version_code 2.14.55) )) ||
+ skip "Need server version at least 2.14.55"
+
+ getfattr -d -m trusted.dmv --absolute-names $DIR > $TMP/dmv.ea ||
+ error "dump $DIR default LMV failed"
+ stack_trap "setfattr --restore=$TMP/dmv.ea"
+
+ $LFS setdirstripe -D -i -1 -c 1 -X 3 --max-inherit-rr 3 $DIR ||
+ error "set $DIR default LMV failed"
+
+ test_fs_dmv_inherit
+}
run_test 413f "lfs getdirstripe -D list ROOT default LMV if it's not set on dir"
+test_413g() {
+ (( MDSCOUNT >= 2 )) || skip "We need at least 2 MDTs for this test"
+
+ mkdir -p $DIR/$tdir/l2/l3/l4 || error "mkdir $tdir/l1/l2/l3 failed"
+ getfattr -d -m trusted.dmv --absolute-names $DIR > $TMP/dmv.ea ||
+ error "dump $DIR default LMV failed"
+ stack_trap "setfattr --restore=$TMP/dmv.ea"
+
+ $LFS setdirstripe -D -i -1 -c 1 -X 3 --max-inherit-rr 3 $DIR ||
+ error "set $DIR default LMV failed"
+
+ FILESET="$FILESET/$tdir/l2/l3/l4" mount_client $MOUNT2 ||
+ error "mount $MOUNT2 failed"
+ stack_trap "umount_client $MOUNT2"
+
+ local saved_DIR=$DIR
+
+ export DIR=$MOUNT2
+
+ stack_trap "export DIR=$saved_DIR"
+
+ # first check filesystem-wide default LMV inheritance
+ test_fs_dmv_inherit || error "incorrect fs default LMV inheritance"
+
+ # then check subdirs are spread to all MDTs
+ createmany -d $DIR/s $((MDSCOUNT * 100)) || error "createmany failed"
+
+ local count=$($LFS getstripe -m $DIR/s* | sort -u | wc -l)
+
+ (( $count == $MDSCOUNT )) || error "dirs are spread to $count MDTs"
+}
+run_test 413g "enforce ROOT default LMV on subdir mount"
+
test_413z() {
local pids=""
local subdir
}
run_test 432 "mv dir from outside Lustre"
+test_433() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run"
+
+ [[ -n "$($LCTL list_param llite.*.inode_cache 2>/dev/null)" ]] ||
+ skip "inode cache not supported"
+
+ $LCTL set_param llite.*.inode_cache=0
+ stack_trap "$LCTL set_param llite.*.inode_cache=1"
+
+ local count=256
+ local before
+ local after
+
+ cancel_lru_locks mdc
+ test_mkdir $DIR/$tdir || error "mkdir $tdir"
+ createmany -m $DIR/$tdir/f $count
+ createmany -d $DIR/$tdir/d $count
+ ls -l $DIR/$tdir > /dev/null
+ stack_trap "rm -rf $DIR/$tdir"
+
+ before=$(num_objects)
+ cancel_lru_locks mdc
+ after=$(num_objects)
+
+ # sometimes even @before is less than 2 * count
+ while (( before - after < count )); do
+ sleep 1
+ after=$(num_objects)
+ wait=$((wait + 1))
+ (( wait % 5 == 0 )) && echo "wait $wait seconds objects: $after"
+ if (( wait > 60 )); then
+ error "inode slab grew from $before to $after"
+ fi
+ done
+
+ echo "lustre_inode_cache $before objs before lock cancel, $after after"
+}
+run_test 433 "ldlm lock cancel releases dentries and inodes"
+
prep_801() {
[[ $MDS1_VERSION -lt $(version_code 2.9.55) ]] ||
[[ $OST1_VERSION -lt $(version_code 2.9.55) ]] &&
changelog_users $SINGLEMDS | grep -q $cl_user ||
error "User $cl_user not found in changelog_users"
- local save="$TMP/$TESTSUITE-$TESTNAME.parameters"
- save_lustre_params client "llite.*.xattr_cache" > $save
- lctl set_param llite.*.xattr_cache=0
- stack_trap "restore_lustre_params < $save; rm -f $save" EXIT
-
rm -rf $DIR/$tdir || error "rm $tdir failed"
mkdir_on_mdt0 $DIR/$tdir || error "mkdir $tdir failed"
touch $DIR/$tdir/trunc || error "touch $tdir/trunc failed"
}
run_test 904 "virtual project ID xattr"
+# LU-8582
+test_905() {
+ (( $OST1_VERSION >= $(version_code 2.8.54) )) ||
+ skip "lustre < 2.8.54 does not support ladvise"
+
+ remote_ost_nodsh && skip "remote OST with nodsh"
+ $LFS setstripe -c -1 -i 0 $DIR/$tfile || error "setstripe failed"
+
+ $LFS ladvise -a willread $DIR/$tfile || error "ladvise does not work"
+
+ #define OBD_FAIL_OST_OPCODE 0x253
+ # OST_LADVISE = 21
+ do_facet ost1 "$LCTL set_param fail_val=21 fail_loc=0x0253"
+ $LFS ladvise -a willread $DIR/$tfile &&
+ error "unexpected success of ladvise with fault injection"
+ $LFS ladvise -a willread $DIR/$tfile |&
+ grep -q "Operation not supported"
+ (( $? == 0 )) || error "unexpected stderr of ladvise with fault injection"
+}
+run_test 905 "bad or new opcode should not stuck client"
+
complete $SECONDS
[ -f $EXT2_DEV ] && rm $EXT2_DEV || true
check_and_cleanup_lustre
git://git.whamcloud.com / fs / lustre-release.git / blobdiff