}
run_test 27G "Clear OST pool from stripe"
+test_27H() {
+ [[ $(lustre_version_code $SINGLEMDS) -le $(version_code 2.11.53) ]] &&
+ skip "Need MDS version newer than 2.11.53"
+ [[ $OSTCOUNT -lt 3 ]] && skip_env "needs >= 3 OSTs"
+ test_mkdir $DIR/$tdir
+ $LFS setstripe -o 0 -o 2 $DIR/$tdir || error "setstripe failed"
+ touch $DIR/$tdir/$tfile
+ $LFS getstripe -c $DIR/$tdir/$tfile
+ [ $($LFS getstripe -c $DIR/$tdir/$tfile) -eq 2 ] ||
+ error "two-stripe file doesn't have two stripes"
+
+ dd if=/dev/zero of=$DIR/$tdir/$tfile bs=4k count=4 || error "dd failed"
+ $LFS getstripe -y $DIR/$tdir/$tfile
+ (( $($LFS getstripe -y $DIR/$tdir/$tfile |
+ egrep -c "l_ost_idx: [02]$") == "2" )) ||
+ error "expected l_ost_idx: [02]$ not matched"
+}
+run_test 27H "Set specific OSTs stripe"
+
# createtest also checks that device nodes are created and
# then visible correctly (#2091)
test_28() { # bug 2091
run_test 102h "grow xattr from inside inode to external block"
test_102ha() {
- large_xattr_enabled || skip_env "large_xattr disabled"
+ large_xattr_enabled || skip_env "ea_inode feature disabled"
grow_xattr $(max_xattr_size)
}
}
run_test 102s "getting nonexistent xattrs should fail"
+test_102t() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ skip "MDS needs to be at least 2.11.52"
+
+ local save="$TMP/$TESTSUITE-$TESTNAME.parameters"
+
+ save_lustre_params client "llite.*.xattr_cache" > $save
+
+ for cache in 0 1; do
+ lctl set_param llite.*.xattr_cache=$cache
+
+ for buf_size in 0 256; do
+ rm -f $DIR/$tfile
+ touch $DIR/$tfile || error "touch"
+ setfattr -n user.multiop $DIR/$tfile
+ $MULTIOP $DIR/$tfile oa$buf_size ||
+ error "cannot get zero length xattr value (buf_size = $buf_size)"
+ done
+ done
+
+ restore_lustre_params < $save
+}
+run_test 102t "zero length xattr values handled correctly"
+
run_acl_subtest()
{
$LUSTRE/tests/acl/run $LUSTRE/tests/acl/$1.test
proc_regexp="/{proc,sys}/{fs,sys,kernel/debug}/{lustre,lnet}/"
+# Some versions of find (4.5.11, 4.5.14) included in CentOS 7.3-7.5 do
+# not honor the -ignore_readdir_race option correctly. So we call
+# error_ignore() rather than error() in these cases. See LU-11152.
+error_133() {
+ if (find --version; do_facet mds1 find --version) |
+ grep -q '\b4\.5\.1[1-4]\b'; then
+ error_ignore LU-11152 "$@"
+ else
+ error "$@"
+ fi
+}
+
test_133f() {
# First without trusting modes.
local proc_dirs=$(eval \ls -d $proc_regexp 2>/dev/null)
-not -name force_lbug \
-not -name changelog_mask \
-exec badarea_io '{}' \; ||
- error "find $proc_dirs failed"
+ error_133 "find $proc_dirs failed"
}
run_test 133f "Check reads/writes of client lustre proc files with bad area io"
-not -name force_lbug \
-not -name changelog_mask \
-exec badarea_io '{}' \\\; ||
- error "$facet find $facet_proc_dirs failed"
+ error_133 "$facet find $facet_proc_dirs failed"
done
# remount the FS in case writes/reads /proc break the FS
test_316() {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
- large_xattr_enabled || skip_env "large_xattr disabled"
+ large_xattr_enabled || skip_env "ea_inode feature disabled"
rm -rf $DIR/$tdir/d
mkdir -p $DIR/$tdir/d
[[ $(lustre_version_code ost1) -lt $(version_code 2.9.55) ]] &&
skip "Need server version at least 2.9.55"
+ [[ $ENABLE_QUOTA ]] && skip "Quota enabled for read-only test"
+
mkdir $DIR/$tdir || error "(1) fail to mkdir"
cp $LUSTRE/tests/test-framework.sh $DIR/$tdir/ ||
}
run_test 806 "Verify Lazy Size on MDS"
+test_807() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ skip "Need MDS version at least 2.11.52" && return
+
+ # Registration step
+ changelog_register || error "changelog_register failed"
+ local cl_user="${CL_USERS[$SINGLEMDS]%% *}"
+ changelog_users $SINGLEMDS | grep -q $cl_user ||
+ error "User $cl_user not found in changelog_users"
+
+ local save="$TMP/$TESTSUITE-$TESTNAME.parameters"
+ save_lustre_params client "llite.*.xattr_cache" > $save
+ lctl set_param llite.*.xattr_cache=0
+ stack_trap "restore_lustre_params < $save" EXIT
+
+ rm -rf $DIR/$tdir || error "rm $tdir failed"
+ mkdir -p $DIR/$tdir || error "mkdir $tdir failed"
+ touch $DIR/$tdir/trunc || error "touch $tdir/trunc failed"
+ $TRUNCATE $DIR/$tdir/trunc 1024 || error "truncate $tdir/trunc failed"
+ $TRUNCATE $DIR/$tdir/trunc 1048576 ||
+ error "truncate $tdir/trunc failed"
+
+ local bs=1048576
+ dd if=/dev/zero of=$DIR/$tdir/single_dd bs=$bs count=1 ||
+ error "write $tfile failed"
+
+ # multi-client wirtes
+ local num=$(get_node_count ${CLIENTS//,/ })
+ local offset=0
+ local i=0
+
+ echo "Test SOM for muti-client ($num) writes"
+ touch $DIR/$tfile || error "touch $tfile failed"
+ $TRUNCATE $DIR/$tfile 0
+ for client in ${CLIENTS//,/ }; do
+ do_node $client $MULTIOP $DIR/$tfile Oz${offset}w${bs}c &
+ local pids[$i]=$!
+ i=$((i + 1))
+ offset=$((offset + $bs))
+ done
+ for (( i=0; i < $num; i++ )); do
+ wait ${pids[$i]}
+ done
+
+ sleep 5
+ $LSOM_SYNC -u $cl_user -m $FSNAME-MDT0000 $MOUNT
+ check_lsom_data $DIR/$tdir/trunc
+ check_lsom_data $DIR/$tdir/single_dd
+ check_lsom_data $DIR/$tfile
+
+ rm -rf $DIR/$tdir
+ # Deregistration step
+ changelog_deregister || error "changelog_deregister failed"
+}
+run_test 807 "verify LSOM syncing tool"
+
#
# tests that do cleanup/setup should be run at the end
#
git://git.whamcloud.com / fs / lustre-release.git / blobdiff