ONLY=${ONLY:-"$*"}
# bug number for skipped test: 13297 2108 9789 3637 9789 3561 12622 12653 12653 5188 10764 16260
-ALWAYS_EXCEPT=" 27u 42a 42b 42c 42d 45 51d 65a 65e 68 75 119d $SANITY_EXCEPT"
+ALWAYS_EXCEPT=" 27u 42a 42b 42c 42d 45 51d 65a 65e 68b 75 119d $SANITY_EXCEPT"
# bug number for skipped test: 2108 9789 3637 9789 3561 5188/5749 1443
#ALWAYS_EXCEPT=${ALWAYS_EXCEPT:-"27m 42a 42b 42c 42d 45 68 76"}
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
OPENFILE=${OPENFILE:-openfile}
OPENUNLINK=${OPENUNLINK:-openunlink}
READS=${READS:-"reads"}
-TOEXCL=${TOEXCL:-toexcl}
TRUNCATE=${TRUNCATE:-truncate}
MUNLINK=${MUNLINK:-munlink}
SOCKETSERVER=${SOCKETSERVER:-socketserver}
# $RUNAS_ID may get set incorrectly somewhere else
[ $UID -eq 0 -a $RUNAS_ID -eq 0 ] && error "\$RUNAS_ID set to 0, but \$UID is also 0!"
-check_runas_id $RUNAS_ID $RUNAS
+check_runas_id $RUNAS_ID $RUNAS_ID $RUNAS
build_test_filter
run_test 22 "unpack tar archive as non-root user ==============="
test_23() {
- mkdir $DIR/d23
- $TOEXCL $DIR/d23/f23
- $TOEXCL -e $DIR/d23/f23 || error
+ mkdir -p $DIR/$tdir
+ local file=$DIR/$tdir/$tfile
+
+ openfile -f O_CREAT:O_EXCL $file || error "$file create failed"
+ openfile -f O_CREAT:O_EXCL $file &&
+ error "$file recreate succeeded" || true
}
run_test 23 "O_CREAT|O_EXCL in subdir =========================="
}
exhaust_precreations() {
- OSTIDX=$1
+ local OSTIDX=$1
+ local MDSIDX=$(get_mds_dir "$DIR/d27")
+ echo OSTIDX=$OSTIDX MDSIDX=$MDSIDX
+
+ local OST=$(lfs osts | grep ${OSTIDX}": " | awk '{print $2}' | sed -e 's/_UUID$//')
+ local MDT_INDEX=$(lfs df | grep "\[MDT:$((MDSIDX - 1))\]" | awk '{print $1}' | \
+ sed -e 's/_UUID$//;s/^.*-//')
- OST=$(lfs osts | grep ${OSTIDX}": " | \
- awk '{print $2}' | sed -e 's/_UUID$//')
# on the mdt's osc
- last_id=$(do_facet $SINGLEMDS lctl get_param -n osc.*${OST}-osc-MDT0000.prealloc_last_id)
- next_id=$(do_facet $SINGLEMDS lctl get_param -n osc.*${OST}-osc-MDT0000.prealloc_next_id)
+ local last_id=$(do_facet mds${MDSIDX} lctl get_param -n osc.*${OST}-osc-${MDT_INDEX}.prealloc_last_id)
+ local next_id=$(do_facet mds${MDSIDX} lctl get_param -n osc.*${OST}-osc-${MDT_INDEX}.prealloc_next_id)
- mkdir -p $DIR/d27/${OST}
- $SETSTRIPE $DIR/d27/${OST} -i $OSTIDX -c 1
+ echo ${OST}-osc-${MDT_INDEX}.prealloc_last_id=$last_id
+ echo ${OST}-osc-${MDT_INDEX}.prealloc_next_id=$next_id
+
+ mkdir -p $DIR/d27
+ $SETSTRIPE $DIR/d27 -i $OSTIDX -c 1
#define OBD_FAIL_OST_ENOSPC 0x215
do_facet ost$((OSTIDX + 1)) lctl set_param fail_loc=0x215
echo "Creating to objid $last_id on ost $OST..."
- createmany -o $DIR/d27/${OST}/f $next_id $((last_id - next_id + 2))
- do_facet $SINGLEMDS lctl get_param -n osc.*${OST}-osc-MDT0000.prealloc* | grep '[0-9]'
+ createmany -o $DIR/d27/${OST}-f $next_id $((last_id - next_id + 2))
+ do_facet mds${MDSIDX} lctl get_param osc.*${OST}-osc-${MDT_INDEX}.prealloc* | grep '[0-9]'
reset_enospc $2
}
reset_enospc
rm -f $DIR/d27/f27p
- $MCREATE $DIR/d27/f27p || error
- $TRUNCATE $DIR/d27/f27p 80000000 || error
- $CHECKSTAT -s 80000000 $DIR/d27/f27p || error
+ $MCREATE $DIR/d27/f27p || error "mcreate failed"
+ $TRUNCATE $DIR/d27/f27p 80000000 || error "truncate failed"
+ $CHECKSTAT -s 80000000 $DIR/d27/f27p || error "checkstat failed"
exhaust_precreations 0 0x80000215
- echo foo >> $DIR/d27/f27p || error
- $CHECKSTAT -s 80000004 $DIR/d27/f27p || error
+ echo foo >> $DIR/d27/f27p || error "append failed"
+ $CHECKSTAT -s 80000004 $DIR/d27/f27p || error "checkstat failed"
reset_enospc
}
[ "$OSTCOUNT" -lt "2" ] && skip "too few OSTs" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
- #define OBD_FAIL_MDS_OSC_PRECREATE 0x13d
-
- do_facet $SINGLEMDS lctl set_param fail_loc=0x13d
+#define OBD_FAIL_MDS_OSC_PRECREATE 0x139
+ do_facet $SINGLEMDS lctl set_param fail_loc=0x139
mkdir -p $DIR/d27u
createmany -o $DIR/d27u/t- 1000
do_facet $SINGLEMDS lctl set_param fail_loc=0
}
run_test 27w "check lfs setstripe -c -s -i options ============="
-test_28() {
+# createtest also checks that device nodes are created and
+# then visible correctly (#2091)
+test_28() { # bug 2091
mkdir $DIR/d28
$CREATETEST $DIR/d28/ct || error
}
run_test 37 "ls a mounted file system to check old content ====="
test_38() {
- o_directory $DIR/$tfile
+ local file=$DIR/$tfile
+ touch $file
+ openfile -f O_DIRECTORY $file
+ local RC=$?
+ local ENOTDIR=20
+ [ $RC -eq 0 ] && error "opened file $file with O_DIRECTORY" || true
+ [ $RC -eq $ENOTDIR ] || error "error $RC should be ENOTDIR ($ENOTDIR)"
}
-run_test 38 "open a regular file with O_DIRECTORY =============="
+run_test 38 "open a regular file with O_DIRECTORY should return -ENOTDIR ==="
test_39() {
touch $DIR/$tfile
}
run_test 46 "dirtying a previously written page ================"
-# Check that device nodes are created and then visible correctly (#2091)
-test_47() {
- cmknod $DIR/test_47_node || error
-}
-run_test 47 "Device nodes check ================================"
+# test_47 is removed "Device nodes check" is moved to test_28
test_48a() { # bug 2399
check_kernel_version 34 || return 0
setup_56 $NUMFILES $NUMDIRS
TDIR=$DIR/${tdir}g
- utime $TDIR/file1 > /dev/null || error
- utime $TDIR/file2 > /dev/null || error
- utime $TDIR/dir1 > /dev/null || error
- utime $TDIR/dir2 > /dev/null || error
- utime $TDIR/dir1/file1 > /dev/null || error
+ utime $TDIR/file1 > /dev/null || error "utime (1)"
+ utime $TDIR/file2 > /dev/null || error "utime (2)"
+ utime $TDIR/dir1 > /dev/null || error "utime (3)"
+ utime $TDIR/dir2 > /dev/null || error "utime (4)"
+ utime $TDIR/dir1/file1 > /dev/null || error "utime (5)"
EXPECTED=5
NUMS=`$LFIND -mtime +1 $TDIR | wc -l`
DEV=$(do_facet $SINGLEMDS lctl get_param -n $MNTDEV)
[ -z "$DEV" ] && error "can't access $MNTDEV"
for DEV in $(do_facet $SINGLEMDS lctl get_param -n $MNTDEV); do
- do_facet $SINGLEMDS dumpe2fs -h $DEV > $TMP/t57a.dump || error "can't access $DEV"
+ do_facet $SINGLEMDS $DUMPE2FS -h $DEV > $TMP/t57a.dump || error "can't access $DEV"
DEVISIZE=`awk '/Inode size:/ { print $3 }' $TMP/t57a.dump`
[ "$DEVISIZE" -gt 128 ] || error "inode size $DEVISIZE"
rm $TMP/t57a.dump
run_test 57a "verify MDS filesystem created with large inodes =="
test_57b() {
- FILECOUNT=100
- FILE1=$DIR/d57b/f1
- FILEN=$DIR/d57b/f$FILECOUNT
- rm -rf $DIR/d57b || error "removing $DIR/d57b"
- mkdir -p $DIR/d57b || error "creating $DIR/d57b"
+ local dir=$DIR/d57b
+
+ local FILECOUNT=100
+ local FILE1=$dir/f1
+ local FILEN=$dir/f$FILECOUNT
+
+ rm -rf $dir || error "removing $dir"
+ mkdir -p $dir || error "creating $dir"
+ local num=$(get_mds_dir $dir)
+ local mymds=mds$num
+
echo "mcreating $FILECOUNT files"
- createmany -m $DIR/d57b/f 1 $FILECOUNT || \
- error "creating files in $DIR/d57b"
+ createmany -m $dir/f 1 $FILECOUNT || \
+ error "creating files in $dir"
# verify that files do not have EAs yet
$GETSTRIPE $FILE1 2>&1 | grep -q "no stripe" || error "$FILE1 has an EA"
$GETSTRIPE $FILEN 2>&1 | grep -q "no stripe" || error "$FILEN has an EA"
- MDSFREE="`lctl get_param -n osd.*MDT0000.kbytesfree 2> /dev/null`"
- MDCFREE="`lctl get_param -n mdc.*.kbytesfree | head -n 1`"
+ sync
+ sleep 1
+ df $dir #make sure we get new statfs data
+ local MDSFREE=$(do_facet $mymds lctl get_param -n osd.*MDT000$((num -1)).kbytesfree)
+ local MDCFREE=$(lctl get_param -n mdc.*MDT000$((num -1))-mdc-*.kbytesfree)
echo "opening files to create objects/EAs"
- for FILE in `seq -f $DIR/d57b/f%g 1 $FILECOUNT`; do
- $OPENFILE -f O_RDWR $FILE > /dev/null || error "opening $FILE"
+ local FILE
+ for FILE in `seq -f $dir/f%g 1 $FILECOUNT`; do
+ $OPENFILE -f O_RDWR $FILE > /dev/null 2>&1 || error "opening $FILE"
done
# verify that files have EAs now
$GETSTRIPE $FILE1 | grep -q "obdidx" || error "$FILE1 missing EA"
$GETSTRIPE $FILEN | grep -q "obdidx" || error "$FILEN missing EA"
- sleep 1 # make sure we get new statfs data
-# MDSFREE2="`lctl get_param -n mds.*.kbytesfree`"
-# MDCFREE2="`lctl get_param -n mdc.*.kbytesfree`"
-# if [ "$MDCFREE2" -lt "$((MDCFREE - 8))" ]; then
-# if [ "$MDSFREE" != "$MDSFREE2" ]; then
-# error "MDC before $MDCFREE != after $MDCFREE2"
-# else
-# echo "MDC before $MDCFREE != after $MDCFREE2"
-# echo "unable to confirm if MDS has large inodes"
-# fi
-# fi
- rm -rf $DIR/d57b
+ sleep 1 #make sure we get new statfs data
+ df $dir
+ local MDSFREE2=$(do_facet $mymds lctl get_param -n osd.*MDT000$((num -1)).kbytesfree)
+ local MDCFREE2=$(lctl get_param -n mdc.*MDT000$((num -1))-mdc-*.kbytesfree)
+ if [ "$MDCFREE2" -lt "$((MDCFREE - 8))" ]; then
+ if [ "$MDSFREE" != "$MDSFREE2" ]; then
+ error "MDC before $MDCFREE != after $MDCFREE2"
+ else
+ echo "MDC before $MDCFREE != after $MDCFREE2"
+ echo "unable to confirm if MDS has large inodes"
+ fi
+ fi
+ rm -rf $dir
}
run_test 57b "default LOV EAs are stored inside large inodes ==="
test_60c() {
echo "create 5000 files"
createmany -o $DIR/f60c- 5000
-#define OBD_FAIL_MDS_LLOG_CREATE_FAILED 0x13c
- lctl set_param fail_loc=0x8000013c
+#define OBD_FAIL_MDS_LLOG_CREATE_FAILED 0x137
+ lctl set_param fail_loc=0x80000137
unlinkmany $DIR/f60c- 5000
lctl set_param fail_loc=0
}
}
run_test 65i "set non-default striping on root directory (bug 6367)="
+test_65ia() { # bug12836
+ $LFS getstripe $MOUNT || error "getstripe $MOUNT failed"
+}
+run_test 65ia "getstripe on -1 default directory striping"
+
+test_65ib() { # bug12836
+ $LFS getstripe -v $MOUNT || error "getstripe -v $MOUNT failed"
+}
+run_test 65ib "getstripe -v on -1 default directory striping"
+
+test_65ic() { # bug12836
+ $LFS find -mtime -1 $MOUNT || error "find $MOUNT failed"
+}
+run_test 65ic "new find on -1 default directory striping"
+
test_65j() { # bug6367
sync; sleep 1
# if we aren't already remounting for each test, do so for this test
cleanup_68() {
trap 0
if [ ! -z "$LLOOP" ]; then
- swapoff $LLOOP || error "swapoff failed"
+ if swapon -s | grep -q $LLOOP; then
+ swapoff $LLOOP || error "swapoff failed"
+ fi
+
$LCTL blockdev_detach $LLOOP || error "detach failed"
rm -f $LLOOP
unset LLOOP
fi
- rm -f $DIR/f68
+ rm -f $DIR/f68*
}
meminfo() {
swapon -s | awk '($1 == "'$1'") { print $4 }'
}
+# test case for lloop driver, basic function
+test_68a() {
+ [ "$UID" != 0 ] && skip "must run as root" && return
+
+ grep -q llite_lloop /proc/modules
+ [ $? -ne 0 ] && skip "can't find module llite_lloop" && return
+
+ LLOOP=$TMP/lloop.`date +%s`.`date +%N`
+ dd if=/dev/zero of=$DIR/f68a bs=4k count=1024
+ $LCTL blockdev_attach $DIR/f68a $LLOOP || error "attach failed"
+
+ trap cleanup_68 EXIT
+
+ directio rdwr $LLOOP 0 1024 4096 || error "direct write failed"
+ directio rdwr $LLOOP 0 1025 4096 && error "direct write should fail"
+
+ cleanup_68
+}
+run_test 68a "lloop driver - basic test ========================"
# excercise swapping to lustre by adding a high priority swapfile entry
# and then consuming memory until it is used.
-test_68() {
+test_68b() { # was test_68
[ "$UID" != 0 ] && skip "must run as root" && return
lctl get_param -n devices | grep -q obdfilter && \
skip "local OST" && return
[[ $NR_BLOCKS -le 2048 ]] && NR_BLOCKS=2048
LLOOP=$TMP/lloop.`date +%s`.`date +%N`
- dd if=/dev/zero of=$DIR/f68 bs=64k seek=$NR_BLOCKS count=1
- mkswap $DIR/f68
+ dd if=/dev/zero of=$DIR/f68b bs=64k seek=$NR_BLOCKS count=1
+ mkswap $DIR/f68b
- $LCTL blockdev_attach $DIR/f68 $LLOOP || error "attach failed"
+ $LCTL blockdev_attach $DIR/f68b $LLOOP || error "attach failed"
trap cleanup_68 EXIT
[ $SWAPUSED -eq 0 ] && echo "no swap used???" || true
}
-run_test 68 "support swapping to Lustre ========================"
+run_test 68b "support swapping to Lustre ========================"
# bug5265, obdfilter oa2dentry return -ENOENT
# #define OBD_FAIL_OST_ENOENT 0x217
run_test 69 "verify oa2dentry return -ENOENT doesn't LBUG ======"
test_71() {
- sh rundbench -C -D $DIR 2 || error "dbench failed!"
+ mkdir -p $DIR/$tdir
+ sh rundbench -C -D $DIR/$tdir 2 || error "dbench failed!"
}
run_test 71 "Running dbench on lustre (don't segment fault) ===="
[ "$RUNAS_ID" = "$UID" ] && skip "RUNAS_ID = UID = $UID -- skipping" && return
# Check that testing environment is properly set up. Skip if not
- FAIL_ON_ERROR=false check_runas_id_ret $RUNAS_ID $RUNAS || {
+ FAIL_ON_ERROR=false check_runas_id_ret $RUNAS_ID $RUNAS_ID $RUNAS || {
skip "User $RUNAS_ID does not exist - skipping"
return 0
}
cancel_lru_locks mdc
test -u $DIR/f72 -o -g $DIR/f72 && error "S/gid is not dropped on MDS"
true
+ rm -f $DIR/f72
}
run_test 72 "Test that remove suid works properly (bug5695) ===="
ls $DIR/f74a
lctl set_param fail_loc=0
true
+ rm -f $DIR/f74a
}
run_test 74a "ldlm_enqueue freed-export error path, ls (shouldn't LBUG)"
touch $DIR/f74b
lctl set_param fail_loc=0
true
+ rm -f $DIR/f74b
}
run_test 74b "ldlm_enqueue freed-export error path, touch (shouldn't LBUG)"
}
test_75a() {
-# skipped temporarily: we do not have join file currently
-# please remove this when ready - huanghua
- return
test75_prep
cp -p ${F128k} ${FHEAD}
run_test 75a "TEST join file ===================================="
test_75b() {
-# skipped temporarily: we do not have join file currently
-# please remove this when ready - huanghua
- return
test75_prep
cp -p ${F128k} ${FTAIL}
run_test 75b "TEST join file 2 =================================="
test_75c() {
-# skipped temporarily: we do not have join file currently
-# please remove this when ready - huanghua
- return
test75_prep
cp -p ${F128k} ${FTAIL}
run_test 75c "TEST join file 3 =================================="
test_75d() {
-# skipped temporarily: we do not have join file currently
-# please remove this when ready - huanghua
- return
test75_prep
cp -p ${F128k} ${FHEAD}
run_test 75d "TEST join file 4 =================================="
test_75e() {
-# skipped temporarily: we do not have join file currently
-# please remove this when ready - huanghua
- return
test75_prep
rm -rf ${FHEAD} || "delete join file error"
run_test 75e "TEST join file 5 (remove joined file) ============="
test_75f() {
-# skipped temporarily: we do not have join file currently
-# please remove this when ready - huanghua
- return
test75_prep
cp -p ${F128k} ${F75}_join_10_compare
run_test 75f "TEST join file 6 (join 10 files) =================="
test_75g() {
-# skipped temporarily: we do not have join file currently
-# please remove this when ready - huanghua
- return
[ ! -f ${F75}_join_10 ] && echo "${F75}_join_10 missing" && return
$LFS getstripe ${F75}_join_10
}
test_77a() { # bug 10889
+ $GSS && skip "could not run with gss" && return
[ ! -f $F77_TMP ] && setup_f77
set_checksums 1
dd if=$F77_TMP of=$DIR/$tfile bs=1M count=$F77SZ || error "dd error"
set_checksums 0
+ rm -f $DIR/$tfile
}
run_test 77a "normal checksum read/write operation ============="
test_77b() { # bug 10889
+ $GSS && skip "could not run with gss" && return
[ ! -f $F77_TMP ] && setup_f77
#define OBD_FAIL_OSC_CHECKSUM_SEND 0x409
lctl set_param fail_loc=0x80000409
error "dd error: $?"
lctl set_param fail_loc=0
set_checksums 0
+ rm -f $DIR/f77b
}
run_test 77b "checksum error on client write ===================="
test_77c() { # bug 10889
+ $GSS && skip "could not run with gss" && return
[ ! -f $DIR/f77b ] && skip "requires 77b - skipping" && return
set_checksums 1
for algo in $CKSUM_TYPES; do
run_test 77c "checksum error on client read ==================="
test_77d() { # bug 10889
+ $GSS && skip "could not run with gss" && return
#define OBD_FAIL_OSC_CHECKSUM_SEND 0x409
lctl set_param fail_loc=0x80000409
set_checksums 1
run_test 77d "checksum error on OST direct write ==============="
test_77e() { # bug 10889
+ $GSS && skip "could not run with gss" && return
[ ! -f $DIR/f77 ] && skip "requires 77d - skipping" && return
#define OBD_FAIL_OSC_CHECKSUM_RECEIVE 0x408
lctl set_param fail_loc=0x80000408
run_test 77e "checksum error on OST direct read ================"
test_77f() { # bug 10889
+ $GSS && skip "could not run with gss" && return
set_checksums 1
for algo in $CKSUM_TYPES; do
cancel_lru_locks osc
run_test 77f "repeat checksum error on write (expect error) ===="
test_77g() { # bug 10889
+ $GSS && skip "could not run with gss" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
[ ! -f $F77_TMP ] && setup_f77
run_test 77g "checksum error on OST write ======================"
test_77h() { # bug 10889
+ $GSS && skip "could not run with gss" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
[ ! -f $DIR/f77g ] && skip "requires 77g - skipping" && return
run_test 77h "checksum error on OST read ======================="
test_77i() { # bug 13805
+ $GSS && skip "could not run with gss" && return
#define OBD_FAIL_OSC_CONNECT_CKSUM 0x40b
lctl set_param fail_loc=0x40b
remount_client $MOUNT
run_test 77i "client not supporting OSD_CONNECT_CKSUM =========="
test_77j() { # bug 13805
+ $GSS && skip "could not run with gss" && return
#define OBD_FAIL_OSC_CKSUM_ADLER_ONLY 0x40c
lctl set_param fail_loc=0x40c
remount_client $MOUNT
echo "MemTotal: $MEMTOTAL"
# reserve 256MB of memory for the kernel and other running processes,
# and then take 1/2 of the remaining memory for the read/write buffers.
- MEMTOTAL=$(((MEMTOTAL - 256 ) / 2))
+ if [ $MEMTOTAL -gt 512 ] ;then
+ MEMTOTAL=$(((MEMTOTAL - 256 ) / 2))
+ else
+ # for those poor memory-starved high-end clusters...
+ MEMTOTAL=$((MEMTOTAL / 2))
+ fi
echo "Mem to use for directio: $MEMTOTAL"
[ $F78SIZE -gt $MEMTOTAL ] && F78SIZE=$MEMTOTAL
[ $F78SIZE -gt 512 ] && F78SIZE=512
[ $SMALLESTOST -lt 10240 ] && \
skip "too small OSTSIZE, useless to run large O_DIRECT test" && return 0
- [ $F78SIZE -gt $((SMALLESTOST * $OSTCOUNT / 1024 - 5)) ] && \
- F78SIZE=$((SMALLESTOST * $OSTCOUNT / 1024 - 5))
+ [ $F78SIZE -gt $((SMALLESTOST * $OSTCOUNT / 1024 - 80)) ] && \
+ F78SIZE=$((SMALLESTOST * $OSTCOUNT / 1024 - 80))
+
[ "$SLOW" = "no" ] && NSEQ=1 && [ $F78SIZE -gt 32 ] && F78SIZE=32
echo "File size: $F78SIZE"
- $SETSTRIPE $DIR/$tfile -c -1 || error "setstripe failed"
+ $SETSTRIPE $DIR/$tfile -c $OSTCOUNT || error "setstripe failed"
for i in `seq 1 $NSEQ`
do
FSIZE=$(($F78SIZE / ($NSEQ - $i + 1)))
test_80() { # bug 10718
dd if=/dev/zero of=$DIR/$tfile bs=1M count=1 seek=1M
sync; sleep 1; sync
- BEFORE=`date +%s`
- cancel_lru_locks OSC
- AFTER=`date +%s`
- DIFF=$((AFTER-BEFORE))
+ local BEFORE=`date +%s`
+ cancel_lru_locks osc
+ local AFTER=`date +%s`
+ local DIFF=$((AFTER-BEFORE))
if [ $DIFF -gt 1 ] ; then
error "elapsed for 1M@1T = $DIFF"
fi
true
+ rm -f $DIR/$tfile
}
run_test 80 "Page eviction is equally fast at high offsets too ===="
-# on the LLNL clusters, runas will still pick up root's $TMP settings,
-# which will not be writable for the runas user, and then you get a CVS
-# error message with a corrupt path string (CVS bug) and panic.
-# We're not using much space, so just stick it in /tmp, which is safe.
-OLDTMPDIR=$TMPDIR
-OLDTMP=$TMP
-TMPDIR=/tmp
-TMP=/tmp
-OLDHOME=$HOME
-[ $RUNAS_ID -ne $UID ] && HOME=/tmp
-
test_99a() {
+ [ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && \
+ return
mkdir -p $DIR/d99cvsroot
chown $RUNAS_ID $DIR/d99cvsroot
+ local oldPWD=$PWD # bug 13584, use $TMP as working dir
+ cd $TMP
+
$RUNAS cvs -d $DIR/d99cvsroot init || error
+ cd $oldPWD
}
run_test 99a "cvs init ========================================="
[ ! -d $DIR/d99cvsroot ] && test_99d
cd $DIR/d99reposname
$RUNAS cvs commit -m 'nomsg' foo99
+ rm -fr $DIR/d99cvsroot
}
run_test 99f "cvs commit ======================================="
test_100() {
+ [ "$NETTYPE" = tcp ] || \
+ { skip "TCP secure port test, not useful for NETTYPE=$NETTYPE" && \
+ return ; }
+
remote_ost_nodsh && skip "remote OST with nodsh" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
remote_servers || \
{ skip "useless for local single node setup" && return; }
netstat -tna | ( rc=1; while read PROT SND RCV LOCAL REMOTE STAT; do
- [ "$PROT" != "$NETTYPE" ] && continue
+ [ "$PROT" != "tcp" ] && continue
RPORT=$(echo $REMOTE | cut -d: -f2)
[ "$RPORT" != "$ACCEPTOR_PORT" ] && continue
[ "$SETUP_TEST101" = "yes" ] || return
trap 0
rm -rf $DIR/$tdir
+ rm -f $DIR/$tfile
SETUP_TEST101=no
}
setup_test102() {
[ "$SETUP_TEST102" = "yes" ] && return
mkdir -p $DIR/$tdir
+ chown $RUNAS_ID $DIR/$tdir
STRIPE_SIZE=65536
- STRIPE_COUNT=4
- STRIPE_OFFSET=2
+ STRIPE_OFFSET=1
+ STRIPE_COUNT=$OSTCOUNT
+ [ $OSTCOUNT -gt 4 ] && STRIPE_COUNT=4
trap cleanup_test102 EXIT
cd $DIR
- $SETSTRIPE $tdir -s $STRIPE_SIZE -i $STRIPE_OFFSET -c $STRIPE_COUNT
+ $1 $SETSTRIPE $tdir -s $STRIPE_SIZE -i $STRIPE_OFFSET -c $STRIPE_COUNT
cd $DIR/$tdir
for num in 1 2 3 4
do
- for count in 1 2 3 4
+ for count in `seq 1 $STRIPE_COUNT`
do
- for offset in 0 1 2 3
+ for offset in `seq 0 $[$STRIPE_COUNT - 1]`
do
local stripe_size=`expr $STRIPE_SIZE \* $num`
local file=file"$num-$offset-$count"
- $SETSTRIPE $file -s $stripe_size -i $offset -c $count
+ $1 $SETSTRIPE $file -s $stripe_size -i $offset -c $count
done
done
done
cd $DIR
- star -c f=$TMP/f102.tar $tdir
+ $1 $TAR cf $TMP/f102.tar $tdir --xattrs
SETUP_TEST102=yes
}
cleanup_test102() {
- [ "$SETUP_TEST102" = "yes" ] || return
trap 0
+ [ "$SETUP_TEST102" = "yes" ] || return 0
rm -f $TMP/f102.tar
- rm -rf $DIR/$tdir
SETUP_TEST102=no
}
local stripe_count=`grep "count" $tmp_file| awk '{print $2}'`
[ "$stripe_size" -eq 65536 ] || error "stripe size $stripe_size != 65536"
[ "$stripe_count" -eq 2 ] || error "stripe count $stripe_count != 2"
+ rm -f $DIR/$tfile
}
run_test 102b "getfattr/setfattr for trusted.lov EAs ============"
}
run_test 102c "non-root getfattr/setfattr for lustre.lov EAs ==========="
-get_stripe_info() {
- stripe_size=0
- stripe_count=0
- stripe_offset=0
- local lines=`sed -n '/obdidx/=' $1`
- stripe_size=`awk '{if($1~/size/) print $2}' $1`
- stripe_count=`awk '{if($1~/count/) print $2}' $1`
- lines=`expr $lines + 1`
- stripe_offset=`sed -n ${lines}p $1 |awk '{print $1}'`
-}
-
compare_stripe_info1() {
for num in 1 2 3 4
do
- for count in 1 2 3 4
+ for count in `seq 1 $STRIPE_COUNT`
do
- for offset in 0 1 2 3
+ for offset in `seq 0 $[$STRIPE_COUNT - 1]`
do
local size=`expr $STRIPE_SIZE \* $num`
local file=file"$num-$offset-$count"
- local tmp_file=out
- $GETSTRIPE -v $file > $tmp_file
- get_stripe_info $tmp_file
- if test $stripe_size -ne $size
- then
- error "$file: different stripe size" && return
+ get_stripe_info client $PWD/$file "$1"
+ if [ $stripe_size -ne $size ]; then
+ error "$file: different stripe size $stripe_size, expected $size" && return
fi
- if test $stripe_count -ne $count
- then
- error "$file: different stripe count" && return
+ if [ $stripe_count -ne $count ]; then
+ error "$file: different stripe count $stripe_count, expected $count" && return
fi
- if test $stripe_offset -ne 0
- then
- error "$file: different stripe offset" && return
+ if [ $stripe_index -ne 0 ]; then
+ error "$file: different stripe offset $stripe_index, expected 0" && return
fi
- rm -f $tmp_file
done
done
done
compare_stripe_info2() {
for num in 1 2 3 4
do
- for count in 1 2 3 4
+ for count in `seq 1 $STRIPE_COUNT`
do
- for offset in 0 1 2 3
+ for offset in `seq 0 $[$STRIPE_COUNT - 1]`
do
local size=`expr $STRIPE_SIZE \* $num`
local file=file"$num-$offset-$count"
- local tmp_file=out
- $GETSTRIPE -v $file > $tmp_file
- get_stripe_info $tmp_file
- if test $stripe_size -ne $size
- then
- error "$file: different stripe size" && return
+ get_stripe_info client $PWD/$file
+ if [ $stripe_size -ne $size ]; then
+ error "$file: different stripe size $stripe_size, expected $size" && return
fi
- if test $stripe_count -ne $count
- then
- error "$file: different stripe count" && return
+ if [ $stripe_count -ne $count ]; then
+ error "$file: different stripe count $stripe_count, expected $count" && return
fi
- if test $stripe_offset -ne $offset
- then
- error "$file: different stripe offset" && return
+ if [ $stripe_index -ne $offset ]; then
+ error "$file: different stripe offset $stripe_index, expected $offset" && return
fi
- rm -f $tmp_file
done
done
done
}
+find_lustre_tar() {
+ [ -n "$(which tar 2>/dev/null)" ] && strings $(which tar) | grep -q lustre && echo tar
+}
+
test_102d() {
- # b10930: star test for trusted.lov xattr
- star --xhelp 2>&1 | grep -q nolustre
- if [ $? -ne 0 ]
- then
- skip "being skipped because a lustre-aware star is not installed." && return
- fi
- [ "$OSTCOUNT" -lt "4" ] && skip "skipping 4-stripe test" && return
+ # b10930: tar test for trusted.lov xattr
+ TAR=$(find_lustre_tar)
+ [ -z "$TAR" ] && skip "lustre-aware tar is not installed" && return
+ [ "$OSTCOUNT" -lt "2" ] && skip "skipping N-stripe test" && return
setup_test102
mkdir -p $DIR/d102d
- star -x f=$TMP/f102.tar -C $DIR/d102d
+ $TAR xf $TMP/f102.tar -C $DIR/d102d --xattrs
cd $DIR/d102d/$tdir
compare_stripe_info1
-
}
-run_test 102d "star restore stripe info from tarfile,not keep osts ==========="
-
-test_102e() {
- # b10930: star test for trusted.lov xattr
- star --xhelp 2>&1 | grep -q nolustre
- [ $? -ne 0 ] && skip "lustre-aware star is not installed" && return
- [ "$OSTCOUNT" -lt "4" ] && skip "skipping 4-stripe test" && return
- setup_test102
- mkdir -p $DIR/d102e
- star -x -preserve-osts f=$TMP/f102.tar -C $DIR/d102e
- cd $DIR/d102e/$tdir
- compare_stripe_info2
-}
-run_test 102e "star restore stripe info from tarfile, keep osts ==========="
+run_test 102d "tar restore stripe info from tarfile,not keep osts ==========="
test_102f() {
- # b10930: star test for trusted.lov xattr
- star --xhelp 2>&1 | grep -q nolustre
- [ $? -ne 0 ] && skip "lustre-aware star is not installed" && return
- [ "$OSTCOUNT" -lt "4" ] && skip "skipping 4-stripe test" && return
+ # b10930: tar test for trusted.lov xattr
+ TAR=$(find_lustre_tar)
+ [ -z "$TAR" ] && skip "lustre-aware tar is not installed" && return
+ [ "$OSTCOUNT" -lt "2" ] && skip "skipping N-stripe test" && return
setup_test102
mkdir -p $DIR/d102f
cd $DIR
- star -copy $tdir $DIR/d102f
+ $TAR cf - --xattrs $tdir | $TAR xf - --xattrs -C $DIR/d102f
cd $DIR/d102f/$tdir
compare_stripe_info1
}
-run_test 102f "star copy files, not keep osts ==========="
-
-test_102g() {
- # b10930: star test for trusted.lov xattr
- star --xhelp 2>&1 | grep -q nolustre
- [ $? -ne 0 ] && skip "lustre-aware star is not installed" && return
- [ "$OSTCOUNT" -lt "4" ] && skip "skipping 4-stripe test" && return
- setup_test102
- mkdir -p $DIR/d102g
- cd $DIR
- star -copy -preserve-osts $tdir $DIR/d102g
- cd $DIR/d102g/$tdir
- compare_stripe_info2
- cleanup_test102
-}
-run_test 102g "star copy files, keep osts ==========="
+run_test 102f "tar copy files, not keep osts ==========="
test_102h() { # bug 15777
[ -z $(lctl get_param -n mdc.*.connect_flags | grep xattr) ] &&
error "$XBIG different after growing $XSML"
fi
log "$XBIG still valid after growing $XSML"
+ rm -f $file
}
run_test 102h "grow xattr from inside inode to external block"
}
run_test 102i "lgetxattr test on symbolic link ============"
+test_102j() {
+ TAR=$(find_lustre_tar)
+ [ -z "$TAR" ] && skip "lustre-aware tar is not installed" && return
+ [ "$OSTCOUNT" -lt "2" ] && skip "skipping N-stripe test" && return
+ setup_test102 "$RUNAS"
+ mkdir -p $DIR/d102j
+ chown $RUNAS_ID $DIR/d102j
+ $RUNAS $TAR xf $TMP/f102.tar -C $DIR/d102j --xattrs
+ cd $DIR/d102j/$tdir
+ compare_stripe_info1 "$RUNAS"
+}
+run_test 102j "non-root tar restore stripe info from tarfile, not keep osts ==="
+
+cleanup_test102
+
run_acl_subtest()
{
$LUSTRE/tests/acl/run $LUSTRE/tests/acl/$1.test
lfs df || error "lfs df with deactivated OSC failed"
lctl --device %$OSC recover
lfs df || error "lfs df with reactivated OSC failed"
+ rm -f $DIR/$tfile
}
run_test 104 "lfs df [-ih] [path] test ========================="
else
flocks_test 1 off -f $DIR/$tfile || error "fail flock off"
fi
+ rm -f $DIR/$tfile
}
run_test 105a "flock when mounted without -o flock test ========"
else
flocks_test 1 off -c $DIR/$tfile || error "fail flock off"
fi
+ rm -f $DIR/$tfile
}
run_test 105b "fcntl when mounted without -o flock test ========"
else
flocks_test 1 off -l $DIR/$tfile || error "fail flock off"
fi
+ rm -f $DIR/$tfile
}
run_test 105c "lockf when mounted without -o flock test ========"
touch $DIR/d110/yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy && error ""create with 256 char should fail, but not
ls -l $DIR/d110
+ rm -fr $DIR/d110
}
run_test 110 "filename length checking"
echo "$MAXC files created on larger OST $MAXI1"
[ $MINC -gt 0 ] && echo "Wrote $(($MAXC * 100 / $MINC - 100))% more files to larger OST $MAXI1"
[ $MAXC -gt $MINC ] || error_ignore "stripe QOS didn't balance free space"
+
+ rm -rf $DIR/$tdir/OST${MINI}
}
run_test 116 "stripe QOS: free space balance ==================="
> $DIR/$tfile || error "truncate failed"
lctl set_param fail_loc=0
echo "Truncate succeeded."
+ rm -f $DIR/$tfile
}
run_test 117 "verify fsfilt_extend =========="
FILE=$DIR/reset_async
# Ensure all OSCs are cleared
- $LSTRIPE $FILE 0 -1 -1
+ $LSTRIPE -c -1 $FILE
dd if=/dev/zero of=$FILE bs=64k count=$OSTCOUNT
sync
rm $FILE
error "Dirty pages not flushed to disk, dirty=$DIRTY, writeback=$WRITEBACK"
return 1;
fi
+ rm -f $DIR/$tfile
}
run_test 118a "verify O_SYNC works =========="
SLOWOK=1
fi
- remount_client $MOUNT
+ rm -rf $DIR/$tdir
mkdir -p $DIR/$tdir
- error=0
NUMFREE=`df -i -P $DIR | tail -n 1 | awk '{ print $4 }'`
[ $NUMFREE -gt 100000 ] && NUMFREE=100000 || NUMFREE=$((NUMFREE-1000))
MULT=10
- for ((i=1, j=0; i<=$NUMFREE; j=$i, i=$((i * MULT)) )); do
+ for ((i=100, j=0; i<=$NUMFREE; j=$i, i=$((i * MULT)) )); do
createmany -o $DIR/$tdir/$tfile $j $((i - j))
- lctl get_param -n llite.*.statahead_max | grep '[0-9]'
- cancel_lru_locks mdc
- cancel_lru_locks osc
- stime=`date +%s`
- ls -l $DIR/$tdir > /dev/null
- etime=`date +%s`
- delta_sa=$((etime - stime))
- log "ls $i files with statahead: $delta_sa sec"
- lctl get_param -n llite.*.statahead_stats
-
max=`lctl get_param -n llite.*.statahead_max | head -n 1`
lctl set_param -n llite.*.statahead_max 0
lctl get_param llite.*.statahead_max
cancel_lru_locks mdc
cancel_lru_locks osc
stime=`date +%s`
- ls -l $DIR/$tdir > /dev/null
+ time ls -l $DIR/$tdir | wc -l
etime=`date +%s`
delta=$((etime - stime))
log "ls $i files without statahead: $delta sec"
-
lctl set_param llite.*.statahead_max=$max
- if [ $delta_sa -gt $(($delta + 2)) ]; then
- log "ls $i files is slower with statahead!"
- error=1
+
+ swrong=`lctl get_param -n llite.*.statahead_stats | grep "statahead wrong:" | awk '{print $3}'`
+ lctl get_param -n llite.*.statahead_max | grep '[0-9]'
+ cancel_lru_locks mdc
+ cancel_lru_locks osc
+ stime=`date +%s`
+ time ls -l $DIR/$tdir | wc -l
+ etime=`date +%s`
+ delta_sa=$((etime - stime))
+ log "ls $i files with statahead: $delta_sa sec"
+ lctl get_param -n llite.*.statahead_stats
+ ewrong=`lctl get_param -n llite.*.statahead_stats | grep "statahead wrong:" | awk '{print $3}'`
+
+ if [ $swrong -lt $ewrong ]; then
+ log "statahead was stopped, maybe too many locks held!"
+ fi
+
+ [ $delta -eq 0 ] && continue
+
+ if [ $((delta_sa * 100)) -gt $((delta * 105)) ]; then
+ if [ $SLOWOK -eq 0 ]; then
+ error "ls $i files is slower with statahead!"
+
+ max=`lctl get_param -n llite.*.statahead_max | head -n 1`
+ lctl set_param -n llite.*.statahead_max 0
+ lctl get_param llite.*.statahead_max
+ cancel_lru_locks mdc
+ cancel_lru_locks osc
+ $LCTL dk > /dev/null
+ stime=`date +%s`
+ time ls -l $DIR/$tdir | wc -l
+ etime=`date +%s`
+ $LCTL dk > $TMP/sanity_test_123a_${i}_disable_${etime}.log
+ delta=$((etime - stime))
+ log "ls $i files without statahead: $delta sec, dump to $TMP/sanity_test_123a_${i}_disable_${etime}.log"
+ lctl set_param llite.*.statahead_max=$max
+
+ lctl get_param -n llite.*.statahead_max | grep '[0-9]'
+ cancel_lru_locks mdc
+ cancel_lru_locks osc
+ $LCTL dk > /dev/null
+ stime=`date +%s`
+ time ls -l $DIR/$tdir | wc -l
+ etime=`date +%s`
+ $LCTL dk > $TMP/sanity_test_123a_${i}_enable_${etime}.log
+ delta_sa=$((etime - stime))
+ log "ls $i files with statahead: $delta_sa sec, dump to $TMP/sanity_test_123a_${i}_enable_${etime}.log"
+ lctl get_param -n llite.*.statahead_stats
+ else
+ log "ls $i files is slower with statahead!"
+ fi
+ break
fi
[ $delta -gt 20 ] && break
log "rm -r $DIR/$tdir/: $delta seconds"
log "rm done"
lctl get_param -n llite.*.statahead_stats
- # wait for commitment of removal
- sleep 2
- [ $error -ne 0 -a $SLOWOK -eq 0 ] && error "statahead is slow!"
- return 0
}
run_test 123a "verify statahead work"
test_124a() {
[ -z "`lctl get_param -n mdc.*.connect_flags | grep lru_resize`" ] && \
skip "no lru resize on server" && return 0
- NR=2000
+ local NR=2000
mkdir -p $DIR/$tdir || error "failed to create $DIR/$tdir"
- # use touch to produce $NR new locks
log "create $NR files at $DIR/$tdir"
createmany -o $DIR/$tdir/f $NR ||
error "failed to create $NR files in $DIR/$tdir"
cancel_lru_locks mdc
ls -l $DIR/$tdir > /dev/null
- NSDIR=""
- LRU_SIZE=0
+ local NSDIR=""
+ local LRU_SIZE=0
for VALUE in `lctl get_param ldlm.namespaces.*mdc-*.lru_size`; do
- PARAM=`echo ${VALUE[0]} | cut -d "=" -f1`
+ local PARAM=`echo ${VALUE[0]} | cut -d "=" -f1`
LRU_SIZE=$(lctl get_param -n $PARAM)
if [ $LRU_SIZE -gt $(default_lru_size) ]; then
NSDIR=$(echo $PARAM | cut -d "." -f1-3)
- log "using $(basename $NSDIR) namespace"
+ log "NS=$(basename $NSDIR)"
break
fi
done
skip "Not enough cached locks created!"
return 0
fi
- log "created $LRU_SIZE lock(s)"
-
- # we want to sleep 30s to not make test too long
- SLEEP=30
- SLEEP_ADD=2
-
- # we know that lru resize allows one client to hold $LIMIT locks for 10h
- MAX_HRS=10
-
- # get the pool limit
- LIMIT=`lctl get_param -n $NSDIR.pool.limit`
-
- # calculate lock volume factor taking into account data set size and the
- # rule that number of locks will be getting smaller durring sleep interval
- # and we need to additionally enforce LVF to take this into account.
- # Use $LRU_SIZE_B here to take into account real number of locks created
- # in the case of CMD, LRU_SIZE_B != $NR in most of cases
- LVF=$(($MAX_HRS * 60 * 60 * $LIMIT / $SLEEP))
- LRU_SIZE_B=$LRU_SIZE
- log "make client drop locks $LVF times faster so that ${SLEEP}s is enough to cancel $LRU_SIZE lock(s)"
- OLD_LVF=`lctl get_param -n $NSDIR.pool.lock_volume_factor`
+ log "LRU=$LRU_SIZE"
+
+ local SLEEP=30
+
+ # We know that lru resize allows one client to hold $LIMIT locks
+ # for 10h. After that locks begin to be killed by client.
+ local MAX_HRS=10
+ local LIMIT=`lctl get_param -n $NSDIR.pool.limit`
+
+ # Make LVF so higher that sleeping for $SLEEP is enough to _start_
+ # killing locks. Some time was spent for creating locks. This means
+ # that up to the moment of sleep finish we must have killed some of
+ # them (10-100 locks). This depends on how fast ther were created.
+ # Many of them were touched in almost the same moment and thus will
+ # be killed in groups.
+ local LVF=$(($MAX_HRS * 60 * 60 / $SLEEP * $LIMIT / $LRU_SIZE))
+
+ # Use $LRU_SIZE_B here to take into account real number of locks
+ # created in the case of CMD, LRU_SIZE_B != $NR in most of cases
+ local LRU_SIZE_B=$LRU_SIZE
+ log "LVF=$LVF"
+ local OLD_LVF=`lctl get_param -n $NSDIR.pool.lock_volume_factor`
lctl set_param -n $NSDIR.pool.lock_volume_factor $LVF
- log "sleep for $((SLEEP+SLEEP_ADD))s"
- sleep $((SLEEP+SLEEP_ADD))
+
+ # Let's make sure that we really have some margin. Client checks
+ # cached locks every 10 sec.
+ SLEEP=$((SLEEP+20))
+ log "Sleep ${SLEEP} sec"
+ local SEC=0
+ while ((SEC<$SLEEP)); do
+ echo -n "..."
+ sleep 5
+ SEC=$((SEC+5))
+ LRU_SIZE=`lctl get_param -n $NSDIR/lru_size`
+ echo -n "$LRU_SIZE"
+ done
+ echo ""
lctl set_param -n $NSDIR.pool.lock_volume_factor $OLD_LVF
- LRU_SIZE_A=`lctl get_param -n $NSDIR.lru_size`
+ local LRU_SIZE_A=`lctl get_param -n $NSDIR/lru_size`
[ $LRU_SIZE_B -gt $LRU_SIZE_A ] || {
- error "No locks dropped in "$((SLEEP+SLEEP_ADD))"s. LRU size: $LRU_SIZE_A"
+ error "No locks dropped in ${SLEEP}s. LRU size: $LRU_SIZE_A"
unlinkmany $DIR/$tdir/f $NR
return
}
- log "Dropped "$((LRU_SIZE_B-LRU_SIZE_A))" locks in "$((SLEEP+SLEEP_ADD))"s"
+ log "Dropped "$((LRU_SIZE_B-LRU_SIZE_A))" locks in ${SLEEP}s"
log "unlink $NR files at $DIR/$tdir"
unlinkmany $DIR/$tdir/f $NR
}
test_126() { # bug 12829/13455
[ -z "$(lctl get_param -n llite.*.client_type | grep local)" ] && skip "must run as local client" && return
[ "$UID" != 0 ] && echo "skipping $TESTNAME (must run as root)" && return
+ $GSS && skip "must run as gss disabled" && return
+
$RUNAS -u 0 -g 1 touch $DIR/$tfile || error "touch failed"
gid=`ls -n $DIR/$tfile | awk '{print $4}'`
rm -f $DIR/$tfile
}
run_test 129 "test directory size limit ========================"
+OLDIFS="$IFS"
+cleanup_130() {
+ trap 0
+ IFS="$OLDIFS"
+}
+
test_130a() {
filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
[ -n "$filefrag_op" ] && skip "filefrag does not support FIEMAP" && return
+ trap cleanup_130 EXIT RETURN
+
local fm_file=$DIR/$tfile
lfs setstripe -s 65536 -c 1 $fm_file || error "setstripe failed on $fm_file"
dd if=/dev/zero of=$fm_file bs=65536 count=1 || error "dd failed for $fm_file"
frag_lun=`echo $line | cut -d: -f5`
ext_len=`echo $line | cut -d: -f4`
if (( $frag_lun != $lun )); then
+ cleanup_130
error "FIEMAP on 1-stripe file($fm_file) failed"
return
fi
done
if (( lun != frag_lun || start_blk != 0 || tot_len != 64 )); then
+ cleanup_130
error "FIEMAP on 1-stripe file($fm_file) failed;"
return
fi
+
+ cleanup_130
+
echo "FIEMAP on single striped file succeeded"
}
run_test 130a "FIEMAP (1-stripe file)"
filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
[ -n "$filefrag_op" ] && skip "filefrag does not support FIEMAP" && return
+ trap cleanup_130 EXIT RETURN
+
local fm_file=$DIR/$tfile
lfs setstripe -s 65536 -c 2 $fm_file || error "setstripe failed on $fm_file"
dd if=/dev/zero of=$fm_file bs=1M count=2 || error "dd failed on $fm_file"
ext_len=`echo $line | cut -d: -f4`
if (( $frag_lun != $last_lun )); then
if (( tot_len != 1024 )); then
+ cleanup_130
error "FIEMAP on $fm_file failed; returned len $tot_len for OST $last_lun instead of 256"
return
else
last_lun=$frag_lun
done
if (( num_luns != 2 || tot_len != 1024 )); then
+ cleanup_130
error "FIEMAP on $fm_file failed; returned wrong number of luns or wrong len for OST $last_lun"
return
fi
+ cleanup_130
+
echo "FIEMAP on 2-stripe file succeeded"
}
run_test 130b "FIEMAP (2-stripe file)"
filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
[ -n "$filefrag_op" ] && skip "filefrag does not support FIEMAP" && return
+ trap cleanup_130 EXIT RETURN
+
local fm_file=$DIR/$tfile
lfs setstripe -s 65536 -c 2 $fm_file || error "setstripe failed on $fm_file"
dd if=/dev/zero of=$fm_file seek=1 bs=1M count=1 || error "dd failed on $fm_file"
if (( $frag_lun != $last_lun )); then
logical=`echo $line | cut -d: -f2 | cut -d. -f1`
if (( logical != 512 )); then
+ cleanup_130
error "FIEMAP on $fm_file failed; returned logical start for lun $logical instead of 512"
return
fi
if (( tot_len != 512 )); then
+ cleanup_130
error "FIEMAP on $fm_file failed; returned len $tot_len for OST $last_lun instead of 1024"
return
else
last_lun=$frag_lun
done
if (( num_luns != 2 || tot_len != 512 )); then
+ cleanup_130
error "FIEMAP on $fm_file failed; returned wrong number of luns or wrong len for OST $last_lun"
return
fi
+ cleanup_130
+
echo "FIEMAP on 2-stripe file with hole succeeded"
}
run_test 130c "FIEMAP (2-stripe file with hole)"
filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
[ -n "$filefrag_op" ] && skip "filefrag does not support FIEMAP" && return
+ trap cleanup_130 EXIT RETURN
+
local fm_file=$DIR/$tfile
lfs setstripe -s 65536 -c $OSTCOUNT $fm_file || error "setstripe failed on $fm_file"
dd if=/dev/zero of=$fm_file bs=1M count=$OSTCOUNT || error "dd failed on $fm_file"
ext_len=`echo $line | cut -d: -f4`
if (( $frag_lun != $last_lun )); then
if (( tot_len != 1024 )); then
+ cleanup_130
error "FIEMAP on $fm_file failed; returned len $tot_len for OST $last_lun instead of 1024"
return
else
last_lun=$frag_lun
done
if (( num_luns != OSTCOUNT || tot_len != 1024 )); then
+ cleanup_130
error "FIEMAP on $fm_file failed; returned wrong number of luns or wrong len for OST $last_lun"
return
fi
+ cleanup_130
+
echo "FIEMAP on N-stripe file succeeded"
}
run_test 130d "FIEMAP (N-stripe file)"
filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
[ -n "$filefrag_op" ] && skip "filefrag does not support FIEMAP" && return
+ trap cleanup_130 EXIT RETURN
+
local fm_file=$DIR/$tfile
lfs setstripe -s 65536 -c 2 $fm_file || error "setstripe failed on $fm_file"
NUM_BLKS=512
ext_len=`echo $line | cut -d: -f4`
if (( $frag_lun != $last_lun )); then
if (( tot_len != $EXPECTED_LEN )); then
+ cleanup_130
error "FIEMAP on $fm_file failed; returned len $tot_len for OST $last_lun instead of $EXPECTED_LEN"
return
else
last_lun=$frag_lun
done
if (( num_luns != 2 || tot_len != $EXPECTED_LEN )); then
- echo "$num_luns $tot_len"
+ cleanup_130
error "FIEMAP on $fm_file failed; returned wrong number of luns or wrong len for OST $last_lun"
return
fi
+ cleanup_130
+
echo "FIEMAP with continuation calls succeeded"
}
run_test 130e "FIEMAP (test continuation FIEMAP calls)"
+# Test for writev/readv
+test_131a() {
+ rwv -f $DIR/$tfile -w -n 3 524288 1048576 1572864 || \
+ error "writev test failed"
+ rwv -f $DIR/$tfile -r -v -n 2 1572864 1048576 || \
+ error "readv failed"
+ rm -f $DIR/$tfile
+}
+run_test 131a "test iov's crossing stripe boundary for writev/readv"
+
+test_131b() {
+ rwv -f $DIR/$tfile -w -a -n 3 524288 1048576 1572864 || \
+ error "append writev test failed"
+ rwv -f $DIR/$tfile -w -a -n 2 1572864 1048576 || \
+ error "append writev test failed"
+ rm -f $DIR/$tfile
+}
+run_test 131b "test append writev"
+
+test_131c() {
+ rwv -f $DIR/$tfile -w -d -n 1 1048576 || return 0
+ error "NOT PASS"
+}
+run_test 131c "test read/write on file w/o objects"
+
+test_131d() {
+ rwv -f $DIR/$tfile -w -n 1 1572864
+ NOB=`rwv -f $DIR/$tfile -r -n 3 524288 524288 1048576 | awk '/error/ {print $6}'`
+ if [ "$NOB" != 1572864 ]; then
+ error "Short read filed: read $NOB bytes instead of 1572864"
+ fi
+ rm -f $DIR/$tfile
+}
+run_test 131d "test short read"
+
+test_131e() {
+ rwv -f $DIR/$tfile -w -s 1048576 -n 1 1048576
+ rwv -f $DIR/$tfile -r -z -s 0 -n 1 524288 || \
+ error "read hitting hole failed"
+ rm -f $DIR/$tfile
+}
+run_test 131e "test read hitting hole"
+
test_140() { #bug-17379
mkdir -p $DIR/$tdir || error "Creating dir $DIR/$tdir"
cd $DIR/$tdir || error "Changing to $DIR/$tdir"
}
done
i=`expr $i - 1`
- [ $i -eq 5 -o $i -eq 8 ] || error "Invalid symlink depth"
echo "The symlink depth = $i"
+ [ $i -eq 4 -o $i -eq 8 ] || error "Invalid symlink depth"
}
run_test 140 "Check reasonable stack depth (shouldn't LBUG) ===="
$LCTL set_param -n obdfilter.*.writethrough_cache_enable 1
# pages should be in the case right after write
- dd if=/dev/urandom of=$DIR/$tfile bs=4k count=$CPAGES || error "dd failed"
- BEFORE=`roc_hit`
- cancel_lru_locks osc
+ dd if=/dev/urandom of=$DIR/$tfile bs=4k count=$CPAGES || error "dd failed"
+ local BEFORE=`roc_hit`
+ cancel_lru_locks osc
cat $DIR/$tfile >/dev/null
- AFTER=`roc_hit`
+ local AFTER=`roc_hit`
if ! let "AFTER - BEFORE == CPAGES"; then
error "NOT IN CACHE: before: $BEFORE, after: $AFTER"
fi
# the following read invalidates the cache
- cancel_lru_locks osc
+ cancel_lru_locks osc
$LCTL set_param -n obdfilter.*.read_cache_enable 0
cat $DIR/$tfile >/dev/null
# now data shouldn't be found in the cache
BEFORE=`roc_hit`
- cancel_lru_locks osc
+ cancel_lru_locks osc
cat $DIR/$tfile >/dev/null
AFTER=`roc_hit`
- if ! let "AFTER - BEFORE == CPAGES"; then
+ if let "AFTER - BEFORE != 0"; then
error "IN CACHE: before: $BEFORE, after: $AFTER"
fi
$LCTL set_param -n obdfilter.*.read_cache_enable 1
- rm -f $DIR/$tfile
+ rm -f $DIR/$tfile
}
run_test 151 "test cache on oss and controls ==============================="
}
run_test 152 "test read/write with enomem ============================"
+test_153() {
+ multiop $DIR/$tfile Ow4096Ycu || error "multiop failed"
+}
+run_test 153 "test if fdatasync does not crash ======================="
+
+err17935 () {
+ if [ $MDSCOUNT -gt 1 ]; then
+ error_ignore 17935 $*
+ else
+ error $*
+ fi
+}
+
+test_154() {
+ cp /etc/hosts $DIR/$tfile
+
+ fid=`$LFS path2fid $DIR/$tfile`
+ rc=$?
+ [ $rc -ne 0 ] && error "error: could not get fid for $DIR/$tfile."
+
+ diff $DIR/$tfile $DIR/.lustre/fid/$fid || error "open by fid failed: did not find expected data in file."
+
+ echo "Opening a file by FID succeeded"
+}
+run_test 154 "Opening a file by FID"
+
+#Changelogs
+test_160() {
+ remote_mds && skip "remote MDS" && return
+ lctl set_param -n mdd.*.changelog on
+ $LFS changelog_clear $FSNAME 0
+
+ # change something
+ mkdir -p $DIR/$tdir/pics/2008/zachy
+ touch $DIR/$tdir/pics/2008/zachy/timestamp
+ cp /etc/hosts $DIR/$tdir/pics/2008/zachy/pic1.jpg
+ mv $DIR/$tdir/pics/2008/zachy $DIR/$tdir/pics/zach
+ ln $DIR/$tdir/pics/zach/pic1.jpg $DIR/$tdir/pics/2008/portland.jpg
+ ln -s $DIR/$tdir/pics/2008/portland.jpg $DIR/$tdir/pics/desktop.jpg
+ rm $DIR/$tdir/pics/desktop.jpg
+
+ # verify contents
+ $LFS changelog $FSNAME
+ # check target fid
+ fidc=$($LFS changelog $FSNAME | grep timestamp | grep "CREAT" | tail -1 | \
+ awk '{print $5}')
+ fidf=$($LFS path2fid $DIR/$tdir/pics/zach/timestamp)
+ [ "$fidc" == "t=$fidf" ] || \
+ err17935 "fid in changelog $fidc != file fid $fidf"
+ # check parent fid
+ fidc=$($LFS changelog $FSNAME | grep timestamp | grep "CREAT" | tail -1 | \
+ awk '{print $6}')
+ fidf=$($LFS path2fid $DIR/$tdir/pics/zach)
+ [ "$fidc" == "p=$fidf" ] || \
+ err17935 "pfid in changelog $fidc != dir fid $fidf"
+
+ # verify purge
+ FIRST_REC=$($LFS changelog $FSNAME | head -1 | awk '{print $1}')
+ $LFS changelog_clear $FSNAME $(($FIRST_REC + 5))
+ PURGE_REC=$($LFS changelog $FSNAME | head -1 | awk '{print $1}')
+ [ $PURGE_REC == $(($FIRST_REC + 6)) ] || \
+ err17935 "first rec after purge should be $(($FIRST_REC + 6)); is $PURGE_REC"
+ # purge all
+ $LFS changelog_clear $FSNAME 0
+ lctl set_param -n mdd.*.changelog off
+}
+run_test 160 "changelog sanity"
+
+test_161() {
+ # need local MDT for fid2path
+ remote_mds && skip "remote MDS" && return
+
+ mkdir -p $DIR/$tdir
+ cp /etc/hosts $DIR/$tdir/$tfile
+ mkdir $DIR/$tdir/foo1
+ mkdir $DIR/$tdir/foo2
+ ln $DIR/$tdir/$tfile $DIR/$tdir/foo1/sofia
+ ln $DIR/$tdir/$tfile $DIR/$tdir/foo2/zachary
+ ln $DIR/$tdir/$tfile $DIR/$tdir/foo1/luna
+ ln $DIR/$tdir/$tfile $DIR/$tdir/foo2/thor
+ local FID=$($LFS path2fid $DIR/$tdir/$tfile)
+ if [ "$($LFS fid2path ${mds1_svc} $FID | wc -l)" != "5" ]; then
+ $LFS fid2path ${mds1_svc} $FID
+ err17935 "bad link ea"
+ fi
+ # middle
+ rm $DIR/$tdir/foo2/zachary
+ # last
+ rm $DIR/$tdir/foo2/thor
+ # first
+ rm $DIR/$tdir/$tfile
+ # rename
+ mv $DIR/$tdir/foo1/sofia $DIR/$tdir/foo2/maggie
+ if [ "$($LFS fid2path ${mds1_svc} --link 1 $FID)" != "/$tdir/foo2/maggie" ]
+ then
+ $LFS fid2path ${mds1_svc} $FID
+ err17935 "bad link rename"
+ fi
+ rm $DIR/$tdir/foo2/maggie
+
+ # overflow the EA
+ local longname=filename_avg_len_is_thirty_two_
+ createmany -l$DIR/$tdir/foo1/luna $DIR/$tdir/foo2/$longname 1000 || \
+ error "failed to hardlink many files"
+ links=$($LFS fid2path ${mds1_svc} $FID | wc -l)
+ echo -n "${links}/1000 links in link EA"
+ [ ${links} -gt 60 ] || err17935 "expected at least 60 links in link EA"
+ unlinkmany $DIR/$tdir/foo2/$longname 1000 || \
+ error "failed to unlink many hardlinks"
+}
+run_test 161 "link ea sanity"
+
+check_path() {
+ local expected=$1
+ shift
+ local fid=$2
+
+ local path=$(${LFS} fid2path $*)
+ RC=$?
+
+ if [ $RC -ne 0 ]; then
+ err17935 "path looked up of $expected failed. Error $RC"
+ return $RC
+ elif [ "${path}" != "${expected}" ]; then
+ err17935 "path looked up \"${path}\" instead of \"${expected}\""
+ return 2
+ fi
+ echo "fid $fid resolves to path $path"
+}
+
+test_162() {
+ # need local MDT for fid2path
+ remote_mds && skip "remote MDS" && return
+
+ # Make changes to filesystem
+ mkdir -p $DIR/$tdir/d2
+ touch $DIR/$tdir/d2/$tfile
+ touch $DIR/$tdir/d2/x1
+ touch $DIR/$tdir/d2/x2
+ mkdir -p $DIR/$tdir/d2/a/b/c
+ mkdir -p $DIR/$tdir/d2/p/q/r
+ fid=$($LFS path2fid $DIR/$tdir/d2/$tfile)
+ check_path "/$tdir/d2/$tfile" ${mds1_svc} $fid --link 0
+ ln $DIR/$tdir/d2/$tfile $DIR/$tdir/d2/p/q/r/hlink
+ mv $DIR/$tdir/d2/$tfile $DIR/$tdir/d2/a/b/c/new_file
+ fid=$($LFS path2fid $DIR/$tdir/d2/a/b/c/new_file)
+ check_path "/$tdir/d2/a/b/c/new_file" ${mds1_svc} $fid --link 1
+ check_path "/$tdir/d2/p/q/r/hlink" ${mds1_svc} $fid --link 0
+ # check that there are 2 links, and that --rec doesnt break anything
+ ${LFS} fid2path ${mds1_svc} $fid --rec 20 | wc -l | grep -q 2 || \
+ err17935 "expected 2 links"
+
+ rm $DIR/$tdir/d2/p/q/r/hlink
+ check_path "/$tdir/d2/a/b/c/new_file" ${mds1_svc} $fid --link 0
+ # Doesnt work with CMD yet: 17935
+ return 0
+}
+run_test 162 "path lookup sanity"
+
+test_170() {
+ $LCTL debug_daemon start $TMP/${tfile}_log_good
+ touch $DIR/$tfile
+ $LCTL debug_daemon stop
+ sed -e "s/^...../a/g" $TMP/${tfile}_log_good > $TMP/${tfile}_log_bad ||
+ error "sed failed to read log_good"
+
+ $LCTL debug_daemon start $TMP/${tfile}_log_good
+ rm -rf $DIR/$tfile
+ $LCTL debug_daemon stop
+
+ $LCTL df $TMP/${tfile}_log_bad 2&> $TMP/${tfile}_log_bad.out ||
+ error "lctl df log_bad failed"
+
+ local bad_line=$(tail -n 1 $TMP/${tfile}_log_bad.out | awk '{print $9}')
+ local good_line1=$(tail -n 1 $TMP/${tfile}_log_bad.out | awk '{print $5}')
+
+ $LCTL df $TMP/${tfile}_log_good 2&>$TMP/${tfile}_log_good.out
+ local good_line2=$(tail -n 1 $TMP/${tfile}_log_good.out | awk '{print $5}')
+
+ [ "$bad_line" ] && [ "$good_line1" ] && [ "$good_line2" ] ||
+ error "bad_line good_line1 good_line2 are empty"
+
+ cat $TMP/${tfile}_log_good >> $TMP/${tfile}_logs_corrupt
+ cat $TMP/${tfile}_log_bad >> $TMP/${tfile}_logs_corrupt
+ cat $TMP/${tfile}_log_good >> $TMP/${tfile}_logs_corrupt
+
+ $LCTL df $TMP/${tfile}_logs_corrupt 2&> $TMP/${tfile}_log_bad.out
+ local bad_line_new=$(tail -n 1 $TMP/${tfile}_log_bad.out | awk '{print $9}')
+ local good_line_new=$(tail -n 1 $TMP/${tfile}_log_bad.out | awk '{print $5}')
+
+ [ "$bad_line_new" ] && [ "$good_line_new" ] ||
+ error "bad_line_new good_line_new are empty"
+
+ local expected_good=$((good_line1 + good_line2*2))
+
+ rm -rf $TMP/${tfile}*
+ if [ $bad_line -ne $bad_line_new ]; then
+ error "expected $bad_line bad lines, but got $bad_line_new"
+ return 1
+ fi
+
+ if [ $expected_good -ne $good_line_new ]; then
+ error "expected $expected_good good lines, but got $good_line_new"
+ return 2
+ fi
+ true
+}
+run_test 170 "test lctl df to handle corrupted log ====================="
+
+# OST pools tests
POOL=${POOL:-cea1}
TGT_COUNT=$OSTCOUNT
TGTPOOL_FIRST=1
}
test_200a() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
do_facet mgs $LCTL pool_new $FSNAME.$POOL
- do_facet mgs $LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL
- [ $? == 0 ] || error "Pool creation of $POOL failed"
+ # get param should return err until pool is created
+ wait_update $HOSTNAME "lctl get_param -n lov.$FSNAME-*.pools.$POOL 2>/dev/null || echo foo" "" || error "Pool creation of $POOL failed"
}
run_test 200a "Create new pool =========================================="
test_200b() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
- TGT=$(seq -f $FSNAME-OST%04g_UUID $TGTPOOL_FIRST $TGTPOOL_STEP \
- $TGTPOOL_MAX | tr '\n' ' ')
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
+ TGT=$(for i in `seq $TGTPOOL_FIRST $TGTPOOL_STEP $TGTPOOL_MAX`; do printf "$FSNAME-OST%04x_UUID " $i; done)
do_facet mgs $LCTL pool_add $FSNAME.$POOL \
- $FSNAME-OST[$TGTPOOL_FIRST-$TGTPOOL_MAX/$TGTPOOL_STEP]_UUID
- res=$(do_facet mgs $LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL | sort \
- | tr '\n' ' ')
- [ "$res" = "$TGT" ] || error "Pool content ($res) do not match requested ($TGT)"
+ $FSNAME-OST[$TGTPOOL_FIRST-$TGTPOOL_MAX/$TGTPOOL_STEP]
+ wait_update $HOSTNAME "lctl get_param -n lov.$FSNAME-*.pools.$POOL | sort -u | tr '\n' ' ' " "$TGT" || error "Add to pool failed"
}
run_test 200b "Add targets to a pool ===================================="
test_200c() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
mkdir -p $POOL_DIR
$SETSTRIPE -c 2 -p $POOL $POOL_DIR
[ $? = 0 ] || error "Cannot set pool $POOL to $POOL_DIR"
run_test 200c "Set pool on a directory ================================="
test_200d() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
res=$($GETSTRIPE $POOL_DIR | grep pool: | cut -f8 -d " ")
[ "$res" = $POOL ] || error "Pool on $POOL_DIR is not $POOL"
}
run_test 200d "Check pool on a directory ==============================="
test_200e() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
failed=0
for i in $(seq -w 1 $(($TGT_COUNT * 3)))
do
run_test 200e "Check files allocation from directory pool =============="
test_200f() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
mkdir -p $POOL_FILE
failed=0
for i in $(seq -w 1 $(($TGT_COUNT * 3)))
run_test 200f "Create files in a pool ==================================="
test_200g() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
- TGT=$(do_facet mgs $LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL | head -1)
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
+ TGT=$($LCTL get_param -n lov.$FSNAME-*.pools.$POOL | head -1)
do_facet mgs $LCTL pool_remove $FSNAME.$POOL $TGT
- res=$(do_facet mgs $LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL | grep $TGT)
- [ "$res" = "" ] || error "$TGT not removed from $FSNAME.$POOL"
+ wait_update $HOSTNAME "lctl get_param -n lov.$FSNAME-*.pools.$POOL | grep $TGT" "" || error "$TGT not removed from $FSNAME.$POOL"
}
run_test 200g "Remove a target from a pool ============================="
test_200h() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
- for TGT in $(do_facet mgs $LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL)
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
+ for TGT in $($LCTL get_param -n lov.$FSNAME-*.pools.$POOL | sort -u)
do
do_facet mgs $LCTL pool_remove $FSNAME.$POOL $TGT
done
- res=$(do_facet mgs $LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL)
- [ "$res" = "" ] || error "Pool $FSNAME.$POOL cannot be drained"
+ wait_update $HOSTNAME "lctl get_param -n lov.$FSNAME-*.pools.$POOL" ""\
+ || error "Pool $FSNAME.$POOL cannot be drained"
}
run_test 200h "Remove all targets from a pool =========================="
test_200i() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
do_facet mgs $LCTL pool_destroy $FSNAME.$POOL
- res=$(do_facet mgs "$LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL 2>/dev/null")
- [ "$res" = "" ] || error "Pool $FSNAME.$POOL is not destroyed"
+ # get param should return err once pool is gone
+ wait_update $HOSTNAME "lctl get_param -n lov.$FSNAME-*.pools.$POOL 2>/dev/null || echo foo" "foo" && return 0
+ error "Pool $FSNAME.$POOL is not destroyed"
}
run_test 200i "Remove a pool ============================================"
-TMPDIR=$OLDTMPDIR
-TMP=$OLDTMP
-HOME=$OLDHOME
+test_212() {
+ size=`date +%s`
+ size=$((size % 8192 + 1))
+ dd if=/dev/urandom of=$DIR/f212 bs=1k count=$size
+ sendfile $DIR/f212 $DIR/f212.xyz || error "sendfile wrong"
+ rm -f $DIR/f212 $DIR/f212.xyz
+}
+run_test 212 "Sendfile test ============================================"
+
+#
+# tests that do cleanup/setup should be run at the end
+#
+
+test_900() {
+ local ls
+ #define OBD_FAIL_MGC_PAUSE_PROCESS_LOG 0x903
+ $LCTL set_param fail_loc=0x903
+ # cancel_lru_locks mgc - does not work due to lctl set_param syntax
+ for ls in /proc/fs/lustre/ldlm/namespaces/MGC*/lru_size; do
+ echo "clear" > $ls
+ done
+ FAIL_ON_ERROR=true cleanup
+ FAIL_ON_ERROR=true setup
+}
+run_test 900 "umount should not race with any mgc requeue thread"
log "cleanup: ======================================================"
check_and_cleanup_lustre
git://git.whamcloud.com / fs / lustre-release.git / blobdiff