OPENFILE=${OPENFILE:-openfile}
OPENUNLINK=${OPENUNLINK:-openunlink}
READS=${READS:-"reads"}
-TOEXCL=${TOEXCL:-toexcl}
TRUNCATE=${TRUNCATE:-truncate}
MUNLINK=${MUNLINK:-munlink}
SOCKETSERVER=${SOCKETSERVER:-socketserver}
run_test 22 "unpack tar archive as non-root user ==============="
test_23() {
- mkdir $DIR/d23
- $TOEXCL $DIR/d23/f23
- $TOEXCL -e $DIR/d23/f23 || error
+ mkdir -p $DIR/$tdir
+ local file=$DIR/$tdir/$tfile
+
+ openfile -f O_CREAT:O_EXCL $file || error "$file create failed"
+ openfile -f O_CREAT:O_EXCL $file &&
+ error "$file recreate succeeded" || true
}
run_test 23 "O_CREAT|O_EXCL in subdir =========================="
}
exhaust_precreations() {
- OSTIDX=$1
+ local OSTIDX=$1
+ local MDSIDX=$(get_mds_dir "$DIR/d27")
+ echo OSTIDX=$OSTIDX MDSIDX=$MDSIDX
+
+ local OST=$(lfs osts | grep ${OSTIDX}": " | awk '{print $2}' | sed -e 's/_UUID$//')
+ local MDT_INDEX=$(lfs df | grep "\[MDT:$((MDSIDX - 1))\]" | awk '{print $1}' | \
+ sed -e 's/_UUID$//;s/^.*-//')
- OST=$(lfs osts | grep ${OSTIDX}": " | \
- awk '{print $2}' | sed -e 's/_UUID$//')
# on the mdt's osc
- last_id=$(do_facet $SINGLEMDS lctl get_param -n osc.*${OST}-osc-MDT0000.prealloc_last_id)
- next_id=$(do_facet $SINGLEMDS lctl get_param -n osc.*${OST}-osc-MDT0000.prealloc_next_id)
+ local last_id=$(do_facet mds${MDSIDX} lctl get_param -n osc.*${OST}-osc-${MDT_INDEX}.prealloc_last_id)
+ local next_id=$(do_facet mds${MDSIDX} lctl get_param -n osc.*${OST}-osc-${MDT_INDEX}.prealloc_next_id)
- mkdir -p $DIR/d27/${OST}
- $SETSTRIPE $DIR/d27/${OST} -i $OSTIDX -c 1
+ echo ${OST}-osc-${MDT_INDEX}.prealloc_last_id=$last_id
+ echo ${OST}-osc-${MDT_INDEX}.prealloc_next_id=$next_id
+
+ mkdir -p $DIR/d27
+ $SETSTRIPE $DIR/d27 -i $OSTIDX -c 1
#define OBD_FAIL_OST_ENOSPC 0x215
do_facet ost$((OSTIDX + 1)) lctl set_param fail_loc=0x215
echo "Creating to objid $last_id on ost $OST..."
- createmany -o $DIR/d27/${OST}/f $next_id $((last_id - next_id + 2))
- do_facet $SINGLEMDS lctl get_param -n osc.*${OST}-osc-MDT0000.prealloc* | grep '[0-9]'
+ createmany -o $DIR/d27/${OST}-f $next_id $((last_id - next_id + 2))
+ do_facet mds${MDSIDX} lctl get_param osc.*${OST}-osc-${MDT_INDEX}.prealloc* | grep '[0-9]'
reset_enospc $2
}
}
run_test 27w "check lfs setstripe -c -s -i options ============="
-test_28() {
+# createtest also checks that device nodes are created and
+# then visible correctly (#2091)
+test_28() { # bug 2091
mkdir $DIR/d28
$CREATETEST $DIR/d28/ct || error
}
run_test 37 "ls a mounted file system to check old content ====="
test_38() {
- o_directory $DIR/$tfile
+ local file=$DIR/$tfile
+ touch $file
+ openfile -f O_DIRECTORY $file
+ local RC=$?
+ local ENOTDIR=20
+ [ $RC -eq 0 ] && error "opened file $file with O_DIRECTORY" || true
+ [ $RC -eq $ENOTDIR ] || error "error $RC should be ENOTDIR ($ENOTDIR)"
}
-run_test 38 "open a regular file with O_DIRECTORY =============="
+run_test 38 "open a regular file with O_DIRECTORY should return -ENOTDIR ==="
test_39() {
touch $DIR/$tfile
}
run_test 46 "dirtying a previously written page ================"
-# Check that device nodes are created and then visible correctly (#2091)
-test_47() {
- cmknod $DIR/test_47_node || error
-}
-run_test 47 "Device nodes check ================================"
+# test_47 is removed "Device nodes check" is moved to test_28
test_48a() { # bug 2399
check_kernel_version 34 || return 0
setup_56 $NUMFILES $NUMDIRS
TDIR=$DIR/${tdir}g
- utime $TDIR/file1 > /dev/null || error
- utime $TDIR/file2 > /dev/null || error
- utime $TDIR/dir1 > /dev/null || error
- utime $TDIR/dir2 > /dev/null || error
- utime $TDIR/dir1/file1 > /dev/null || error
+ utime $TDIR/file1 > /dev/null || error "utime (1)"
+ utime $TDIR/file2 > /dev/null || error "utime (2)"
+ utime $TDIR/dir1 > /dev/null || error "utime (3)"
+ utime $TDIR/dir2 > /dev/null || error "utime (4)"
+ utime $TDIR/dir1/file1 > /dev/null || error "utime (5)"
EXPECTED=5
NUMS=`$LFIND -mtime +1 $TDIR | wc -l`
$GETSTRIPE $FILE1 2>&1 | grep -q "no stripe" || error "$FILE1 has an EA"
$GETSTRIPE $FILEN 2>&1 | grep -q "no stripe" || error "$FILEN has an EA"
+ sync
+ sleep 1
+ df $dir #make sure we get new statfs data
local MDSFREE=$(do_facet $mymds lctl get_param -n osd.*MDT000$((num -1)).kbytesfree)
- local MDCFREE=$(lctl get_param -n mdc.*.kbytesfree | head -n 1)
+ local MDCFREE=$(lctl get_param -n mdc.*MDT000$((num -1))-mdc-*.kbytesfree)
echo "opening files to create objects/EAs"
local FILE
for FILE in `seq -f $dir/f%g 1 $FILECOUNT`; do
- $OPENFILE -f O_RDWR $FILE > /dev/null || error "opening $FILE"
+ $OPENFILE -f O_RDWR $FILE > /dev/null 2>&1 || error "opening $FILE"
done
# verify that files have EAs now
$GETSTRIPE $FILE1 | grep -q "obdidx" || error "$FILE1 missing EA"
$GETSTRIPE $FILEN | grep -q "obdidx" || error "$FILEN missing EA"
-# sleep 1 # make sure we get new statfs data
-# local MDSFREE2=$(do_facet $mymds lctl get_param -n osd.*MDT000$((num -1)).kbytesfree)
-# local MDCFREE2=$(lctl get_param -n mdc.*.kbytesfree)
-# if [ "$MDCFREE2" -lt "$((MDCFREE - 8))" ]; then
-# if [ "$MDSFREE" != "$MDSFREE2" ]; then
-# error "MDC before $MDCFREE != after $MDCFREE2"
-# else
-# echo "MDC before $MDCFREE != after $MDCFREE2"
-# echo "unable to confirm if MDS has large inodes"
-# fi
-# fi
+ sleep 1 #make sure we get new statfs data
+ df $dir
+ local MDSFREE2=$(do_facet $mymds lctl get_param -n osd.*MDT000$((num -1)).kbytesfree)
+ local MDCFREE2=$(lctl get_param -n mdc.*MDT000$((num -1))-mdc-*.kbytesfree)
+ if [ "$MDCFREE2" -lt "$((MDCFREE - 8))" ]; then
+ if [ "$MDSFREE" != "$MDSFREE2" ]; then
+ error "MDC before $MDCFREE != after $MDCFREE2"
+ else
+ echo "MDC before $MDCFREE != after $MDCFREE2"
+ echo "unable to confirm if MDS has large inodes"
+ fi
+ fi
rm -rf $dir
}
run_test 57b "default LOV EAs are stored inside large inodes ==="
test_80() { # bug 10718
dd if=/dev/zero of=$DIR/$tfile bs=1M count=1 seek=1M
sync; sleep 1; sync
- BEFORE=`date +%s`
+ local BEFORE=`date +%s`
cancel_lru_locks osc
- AFTER=`date +%s`
- DIFF=$((AFTER-BEFORE))
+ local AFTER=`date +%s`
+ local DIFF=$((AFTER-BEFORE))
if [ $DIFF -gt 1 ] ; then
error "elapsed for 1M@1T = $DIFF"
fi
}
cleanup_test102() {
- [ "$SETUP_TEST102" = "yes" ] || return
trap 0
+ [ "$SETUP_TEST102" = "yes" ] || return 0
rm -f $TMP/f102.tar
- rm -rf $DIR/$tdir
SETUP_TEST102=no
}
}
run_test 102j "non-root tar restore stripe info from tarfile, not keep osts ==="
+cleanup_test102
+
run_acl_subtest()
{
$LUSTRE/tests/acl/run $LUSTRE/tests/acl/$1.test
echo "$MAXC files created on larger OST $MAXI1"
[ $MINC -gt 0 ] && echo "Wrote $(($MAXC * 100 / $MINC - 100))% more files to larger OST $MAXI1"
[ $MAXC -gt $MINC ] || error_ignore "stripe QOS didn't balance free space"
+
+ rm -rf $DIR/$tdir/OST${MINI}
}
run_test 116 "stripe QOS: free space balance ==================="
FILE=$DIR/reset_async
# Ensure all OSCs are cleared
- $LSTRIPE $FILE 0 -1 -1
+ $LSTRIPE -c -1 $FILE
dd if=/dev/zero of=$FILE bs=64k count=$OSTCOUNT
sync
rm $FILE
$LCTL set_param -n obdfilter.*.writethrough_cache_enable 1
# pages should be in the case right after write
- dd if=/dev/urandom of=$DIR/$tfile bs=4k count=$CPAGES || error "dd failed"
- BEFORE=`roc_hit`
- cancel_lru_locks osc
+ dd if=/dev/urandom of=$DIR/$tfile bs=4k count=$CPAGES || error "dd failed"
+ local BEFORE=`roc_hit`
+ cancel_lru_locks osc
cat $DIR/$tfile >/dev/null
- AFTER=`roc_hit`
+ local AFTER=`roc_hit`
if ! let "AFTER - BEFORE == CPAGES"; then
error "NOT IN CACHE: before: $BEFORE, after: $AFTER"
fi
# the following read invalidates the cache
- cancel_lru_locks osc
+ cancel_lru_locks osc
$LCTL set_param -n obdfilter.*.read_cache_enable 0
cat $DIR/$tfile >/dev/null
# now data shouldn't be found in the cache
BEFORE=`roc_hit`
- cancel_lru_locks osc
+ cancel_lru_locks osc
cat $DIR/$tfile >/dev/null
AFTER=`roc_hit`
if let "AFTER - BEFORE != 0"; then
fi
$LCTL set_param -n obdfilter.*.read_cache_enable 1
- rm -f $DIR/$tfile
+ rm -f $DIR/$tfile
}
run_test 151 "test cache on oss and controls ==============================="
$LCTL debug_daemon start $TMP/${tfile}_log_good
touch $DIR/$tfile
$LCTL debug_daemon stop
- cat $TMP/${tfile}_log_good | sed -e "s/^...../a/g" > $TMP/${tfile}_log_bad
+ sed -e "s/^...../a/g" $TMP/${tfile}_log_good > $TMP/${tfile}_log_bad ||
+ error "sed failed to read log_good"
$LCTL debug_daemon start $TMP/${tfile}_log_good
rm -rf $DIR/$tfile
$LCTL debug_daemon stop
- $LCTL df $TMP/${tfile}_log_bad 2&> $TMP/${tfile}_log_bad.out
- bad_line=`tail -n 1 $TMP/${tfile}_log_bad.out | awk '{print $9}'`
- good_line1=`tail -n 1 $TMP/${tfile}_log_bad.out | awk '{print $5}'`
+ $LCTL df $TMP/${tfile}_log_bad 2&> $TMP/${tfile}_log_bad.out ||
+ error "lctl df log_bad failed"
+
+ local bad_line=$(tail -n 1 $TMP/${tfile}_log_bad.out | awk '{print $9}')
+ local good_line1=$(tail -n 1 $TMP/${tfile}_log_bad.out | awk '{print $5}')
$LCTL df $TMP/${tfile}_log_good 2&>$TMP/${tfile}_log_good.out
- good_line2=`tail -n 1 $TMP/${tfile}_log_good.out | awk '{print $5}'`
+ local good_line2=$(tail -n 1 $TMP/${tfile}_log_good.out | awk '{print $5}')
+ [ "$bad_line" ] && [ "$good_line1" ] && [ "$good_line2" ] ||
+ error "bad_line good_line1 good_line2 are empty"
+
cat $TMP/${tfile}_log_good >> $TMP/${tfile}_logs_corrupt
cat $TMP/${tfile}_log_bad >> $TMP/${tfile}_logs_corrupt
cat $TMP/${tfile}_log_good >> $TMP/${tfile}_logs_corrupt
$LCTL df $TMP/${tfile}_logs_corrupt 2&> $TMP/${tfile}_log_bad.out
- bad_line_new=`tail -n 1 $TMP/${tfile}_log_bad.out | awk '{print $9}'`
- good_line_new=`tail -n 1 $TMP/${tfile}_log_bad.out | awk '{print $5}'`
- expected_good=$((good_line1 + good_line2*2))
+ local bad_line_new=$(tail -n 1 $TMP/${tfile}_log_bad.out | awk '{print $9}')
+ local good_line_new=$(tail -n 1 $TMP/${tfile}_log_bad.out | awk '{print $5}')
+
+ [ "$bad_line_new" ] && [ "$good_line_new" ] ||
+ error "bad_line_new good_line_new are empty"
+
+ local expected_good=$((good_line1 + good_line2*2))
rm -rf $TMP/${tfile}*
if [ $bad_line -ne $bad_line_new ]; then
fi
true
}
-run_test 170 "test lctl df to handle corruputed log ====================="
+run_test 170 "test lctl df to handle corrupted log ====================="
# OST pools tests
POOL=${POOL:-cea1}
}
test_200a() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
do_facet mgs $LCTL pool_new $FSNAME.$POOL
- do_facet mgs $LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL
- [ $? == 0 ] || error "Pool creation of $POOL failed"
+ # get param should return err until pool is created
+ wait_update $HOSTNAME "lctl get_param -n lov.$FSNAME-*.pools.$POOL 2>/dev/null || echo foo" "" || error "Pool creation of $POOL failed"
}
run_test 200a "Create new pool =========================================="
test_200b() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
- TGT=$(seq -f $FSNAME-OST%04g_UUID $TGTPOOL_FIRST $TGTPOOL_STEP \
- $TGTPOOL_MAX | tr '\n' ' ')
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
+ TGT=$(for i in `seq $TGTPOOL_FIRST $TGTPOOL_STEP $TGTPOOL_MAX`; do printf "$FSNAME-OST%04x_UUID " $i; done)
do_facet mgs $LCTL pool_add $FSNAME.$POOL \
- $FSNAME-OST[$TGTPOOL_FIRST-$TGTPOOL_MAX/$TGTPOOL_STEP]_UUID
- res=$(do_facet mgs $LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL | sort \
- | tr '\n' ' ')
- [ "$res" = "$TGT" ] || error "Pool content ($res) do not match requested ($TGT)"
+ $FSNAME-OST[$TGTPOOL_FIRST-$TGTPOOL_MAX/$TGTPOOL_STEP]
+ wait_update $HOSTNAME "lctl get_param -n lov.$FSNAME-*.pools.$POOL | sort -u | tr '\n' ' ' " "$TGT" || error "Add to pool failed"
}
run_test 200b "Add targets to a pool ===================================="
test_200c() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
mkdir -p $POOL_DIR
$SETSTRIPE -c 2 -p $POOL $POOL_DIR
[ $? = 0 ] || error "Cannot set pool $POOL to $POOL_DIR"
run_test 200c "Set pool on a directory ================================="
test_200d() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
res=$($GETSTRIPE $POOL_DIR | grep pool: | cut -f8 -d " ")
[ "$res" = $POOL ] || error "Pool on $POOL_DIR is not $POOL"
}
run_test 200d "Check pool on a directory ==============================="
test_200e() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
failed=0
for i in $(seq -w 1 $(($TGT_COUNT * 3)))
do
run_test 200e "Check files allocation from directory pool =============="
test_200f() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
mkdir -p $POOL_FILE
failed=0
for i in $(seq -w 1 $(($TGT_COUNT * 3)))
run_test 200f "Create files in a pool ==================================="
test_200g() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
- TGT=$(do_facet mgs $LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL | head -1)
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
+ TGT=$($LCTL get_param -n lov.$FSNAME-*.pools.$POOL | head -1)
do_facet mgs $LCTL pool_remove $FSNAME.$POOL $TGT
- res=$(do_facet mgs $LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL | grep $TGT)
- [ "$res" = "" ] || error "$TGT not removed from $FSNAME.$POOL"
+ wait_update $HOSTNAME "lctl get_param -n lov.$FSNAME-*.pools.$POOL | grep $TGT" "" || error "$TGT not removed from $FSNAME.$POOL"
}
run_test 200g "Remove a target from a pool ============================="
test_200h() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
- for TGT in $(do_facet mgs $LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL)
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
+ for TGT in $($LCTL get_param -n lov.$FSNAME-*.pools.$POOL | sort -u)
do
do_facet mgs $LCTL pool_remove $FSNAME.$POOL $TGT
done
- res=$(do_facet mgs $LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL)
- [ "$res" = "" ] || error "Pool $FSNAME.$POOL cannot be drained"
+ wait_update $HOSTNAME "lctl get_param -n lov.$FSNAME-*.pools.$POOL" ""\
+ || error "Pool $FSNAME.$POOL cannot be drained"
}
run_test 200h "Remove all targets from a pool =========================="
test_200i() {
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
do_facet mgs $LCTL pool_destroy $FSNAME.$POOL
- res=$(do_facet mgs "$LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL 2>/dev/null")
- [ "$res" = "" ] || error "Pool $FSNAME.$POOL is not destroyed"
+ # get param should return err once pool is gone
+ wait_update $HOSTNAME "lctl get_param -n lov.$FSNAME-*.pools.$POOL 2>/dev/null || echo foo" "foo" && return 0
+ error "Pool $FSNAME.$POOL is not destroyed"
}
run_test 200i "Remove a pool ============================================"