LU-14143 lov: fix SEEK_HOLE calcs at component end

[fs/lustre-release.git] / lustre / tests / sanity.sh

diff --git a/lustre/tests/sanity.sh b/lustre/tests/sanity.sh
index 91e86e0..66c2903 100755 (executable)
--- a/lustre/tests/sanity.sh
+++ b/lustre/tests/sanity.sh
@@ -44,6 +44,11 @@ ALWAYS_EXCEPT+="               42a     42b     42c "
 # bug number:    LU-8411 LU-9054
 ALWAYS_EXCEPT+=" 407     312"
 
+if $SHARED_KEY; then
+       # bug number:    LU-14181 LU-14181
+       ALWAYS_EXCEPT+=" 64e      64f"
+fi
+
 selinux_status=$(getenforce)
 if [ "$selinux_status" != "Disabled" ]; then
        # bug number:
@@ -3347,6 +3352,21 @@ test_31p() {
 }
 run_test 31p "remove of open striped directory"
 
+test_31q() {
+       [ $MDSCOUNT -lt 3 ] && skip_env "needs >= 3 MDTs"
+
+       $LFS mkdir -i 3,1 $DIR/$tdir || error "mkdir failed"
+       index=$($LFS getdirstripe -i $DIR/$tdir)
+       [ $index -eq 3 ] || error "first stripe index $index != 3"
+       index=$($LFS getdirstripe $DIR/$tdir | tail -1 | awk '{print $1}')
+       [ $index -eq 1 ] || error "second stripe index $index != 1"
+
+       # when "-c <stripe_count>" is set, the number of MDTs specified after
+       # "-i" should equal to the stripe count
+       $LFS mkdir -i 3,1 -c 3 $DIR/$tdir.2 && error "mkdir should fail" || true
+}
+run_test 31q "create striped directory on specific MDTs"
+
 cleanup_test32_mount() {
        local rc=0
        trap 0
@@ -8389,7 +8409,11 @@ test_65n() {
 
        local file2_stripe_size=$($LFS getstripe -S $file2)
        [[ $file2_stripe_size -eq $new_def_stripe_size ]] ||
+       {
+               echo "file2_stripe_size: '$file2_stripe_size'"
+               echo "new_def_stripe_size: '$new_def_stripe_size'"
                error "$file2 didn't inherit stripe size $new_def_stripe_size"
+       }
 
        local dir3=$MOUNT/$tdir-3
        mkdir $dir3 || error "mkdir $dir3 failed"
@@ -8399,7 +8423,11 @@ test_65n() {
        local dir3_layout=$(get_layout_param $dir3)
        local root_dir_layout=$(get_layout_param $MOUNT)
        [[ "$dir3_layout" = "$root_dir_layout" ]] ||
+       {
+               echo "dir3_layout: '$dir3_layout'"
+               echo "root_dir_layout: '$root_dir_layout'"
                error "$dir3 should show the default layout from $MOUNT"
+       }
 
        # set OST pool on root directory
        local pool=$TESTNAME
@@ -8417,7 +8445,7 @@ test_65n() {
 
        local file3_pool=$($LFS getstripe -p $file3)
        [[ "$file3_pool" = "$pool" ]] ||
-               error "$file3 didn't inherit OST pool $pool"
+               error "$file3 ('$file3_pool') didn't inherit OST pool '$pool'"
 
        local dir4=$MOUNT/$tdir-4
        mkdir $dir4 || error "mkdir $dir4 failed"
@@ -8428,7 +8456,11 @@ test_65n() {
        echo "$LFS getstripe -d $MOUNT"
        $LFS getstripe -d $MOUNT
        [[ "$dir4_layout" = "$root_dir_layout" ]] ||
+       {
+               echo "dir4_layout: '$dir4_layout'"
+               echo "root_dir_layout: '$root_dir_layout'"
                error "$dir4 should show the default layout from $MOUNT"
+       }
 
        # new file created in $dir4 should inherit the pool from
        # the filesystem default
@@ -8437,7 +8469,7 @@ test_65n() {
 
        local file4_pool=$($LFS getstripe -p $file4)
        [[ "$file4_pool" = "$pool" ]] ||
-               error "$file4 didn't inherit OST pool $pool"
+               error "$file4 ('$file4_pool') didn't inherit OST pool $pool"
 
        # new subdirectory under non-root directory should inherit
        # the default layout from its parent directory
@@ -8450,7 +8482,11 @@ test_65n() {
        dir4_layout=$(get_layout_param $dir4)
        local dir5_layout=$(get_layout_param $dir5)
        [[ "$dir4_layout" = "$dir5_layout" ]] ||
+       {
+               echo "dir4_layout: '$dir4_layout'"
+               echo "dir5_layout: '$dir5_layout'"
                error "$dir5 should inherit the default layout from $dir4"
+       }
 
        # though subdir under ROOT doesn't inherit default layout, but
        # its sub dir/file should be created with default layout.
@@ -15835,6 +15871,28 @@ test_165e() {
 }
 run_test 165e "ofd_access_log MDT index filter works"
 
+test_165f() {
+       local trace="/tmp/${tfile}.trace"
+       local rc
+       local count
+
+       setup_165
+       do_facet ost1 timeout 60 ofd_access_log_reader \
+               --exit-on-close --debug=- --trace=- > "${trace}" &
+       sleep 5
+       stop ost1
+
+       wait
+       rc=$?
+
+       if ((rc != 0)); then
+               error_noexit "ofd_access_log_reader exited with rc = '${rc}'"
+               cat "${trace}"
+               exit 1
+       fi
+}
+run_test 165f "ofd_access_log_reader --exit-on-close works"
+
 test_169() {
        # do directio so as not to populate the page cache
        log "creating a 10 Mb file"
@@ -22332,6 +22390,13 @@ test_398d() { #  LU-13846
 }
 run_test 398d "run aiocp to verify block size > stripe size"
 
+test_398e() {
+       dd if=/dev/zero of=$DIR/$tfile bs=1234 count=1
+       touch $DIR/$tfile.new
+       dd if=$DIR/$tfile of=$DIR/$tfile.new bs=1M count=1 oflag=direct
+}
+run_test 398e "O_Direct open cleared by fcntl doesn't cause hang"
+
 test_fake_rw() {
        local read_write=$1
        if [ "$read_write" = "write" ]; then
@@ -23880,7 +23945,10 @@ test_430b() {
        [[ $offset == 1000000 ]] || error "offset $offset != 1000000"
        printf "Seeking data from 1000000 ... "
        lseek_test -d 1000000 $file && error "lseek should fail"
-       # full first component, non-inited second one
+       rm $file
+
+       # full component followed by non-inited one
+       $LFS setstripe -E 1M -c2 -E eof $file
        dd if=/dev/urandom of=$file bs=1M count=1
        printf "Seeking hole from 1000000 ... "
        offset=$(lseek_test -l 1000000 $file)
@@ -23891,7 +23959,6 @@ test_430b() {
        # init second component and truncate back
        echo "123" >> $file
        $TRUNCATE $file 1048576
-       ls -lia $file
        printf "Seeking hole from 1000000 ... "
        offset=$(lseek_test -l 1000000 $file)
        echo $offset
@@ -25060,8 +25127,18 @@ test_820() {
        # open intent should update default EA size
        # see mdc_update_max_ea_from_body()
        # notice this is the very first RPC to MDS2
-       cp /etc/services $DIR/$tdir/mds2 ||
-               error "Failed to copy files to mds$n"
+       out=$(cp /etc/services $DIR/$tdir/mds2 2>&1)
+       ret=$?
+       echo $out
+       # With SSK, this situation can lead to -EPERM being returned.
+       # In that case, simply retry.
+       if [ $ret -ne 0 ] && $SHARED_KEY; then
+               if echo "$out" | grep -q "not permitted"; then
+                       cp /etc/services $DIR/$tdir/mds2
+                       ret=$?
+               fi
+       fi
+       [ $ret -eq 0 ] || error "Failed to copy files to mds$n"
 }
 run_test 820 "update max EA from open intent"