[ "$SLOW" = "no" ] && EXCEPT_SLOW="24o 27m 64b 68 71 77f 78 115 124b 230d"
-[ $(facet_fstype $SINGLEMDS) = "zfs" ] &&
-# bug number for skipped test: LU-1593 LU-2610 LU-2833 LU-1957 LU-2805
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 34h 40 48a 180 184c"
+if [ $(facet_fstype $SINGLEMDS) = "zfs" ]; then
+ # bug number for skipped test: LU-1593 LU-2833 LU-1957 LU-2805
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 34h 48a 180 184c"
+ [ "$SLOW" = "no" ] && EXCEPT_SLOW="$EXCEPT_SLOW 51b 51ba"
+fi
FAIL_ON_ERROR=false
stop mds${mds_index}
do_facet mds${mds_index} $cmd || rc=$?
- start mds${mds_index} $devname $MDS_MOUNT_OPTS
+ start mds${mds_index} $devname $MDS_MOUNT_OPTS || error "start failed"
df $MOUNT > /dev/null 2>&1
[ $rc -ne 0 ] && error "e2fsck should not report error upon "\
"short/long symlink MDT: rc=$rc"
stop mds${mdt_index}
do_facet mds${mdt_index} $cmd || rc=$?
- start mds${mdt_index} $devname $MDS_MOUNT_OPTS
+ start mds${mdt_index} $devname $MDS_MOUNT_OPTS ||
+ error "mount mds${mdt_index} failed"
df $MOUNT > /dev/null 2>&1
[ $rc -ne 0 ] && break
done
touch $WDIR/$tfile
stop mds${mdt_index}
- start mds${mdt_index} $mdtdevname $MDS_MOUNT_OPTS
+ start mds${mdt_index} $mdtdevname $MDS_MOUNT_OPTS ||
+ error "mount mds${mdt_index} failed"
#define OBD_FAIL_OSD_LMA_INCOMPAT 0x194
do_facet mds${mdt_index} lctl set_param fail_loc=0x194
run_test 27e "setstripe existing file (should return error) ======"
test_27f() {
- test_mkdir -p $DIR/d27
- $SETSTRIPE -S 100 -i 0 -c 1 $DIR/d27/fbad && error "setstripe failed"
- dd if=/dev/zero of=$DIR/d27/fbad bs=4k count=4 || error "dd failed"
- $GETSTRIPE $DIR/d27/fbad || error "$GETSTRIPE failed"
+ test_mkdir $DIR/$tdir
+ $SETSTRIPE -S 100 -i 0 -c 1 $DIR/$tdir/$tfile &&
+ error "$SETSTRIPE $DIR/$tdir/$tfile failed"
+ $CHECKSTAT -t file $DIR/$tdir/$tfile &&
+ error "$CHECKSTAT -t file $DIR/$tdir/$tfile should fail"
+ dd if=/dev/zero of=$DIR/$tdir/$tfile bs=4k count=4 || error "dd failed"
+ $GETSTRIPE $DIR/$tdir/$tfile || error "$GETSTRIPE failed"
}
run_test 27f "setstripe with bad stripe size (should return error)"
test_mkdir -p -c1 $BASE
+ $LFS df
+ $LFS df -i
local mdtidx=$(printf "%04x" $($LFS getstripe -M $BASE))
local numfree=$(lctl get_param -n mdc.$FSNAME-MDT$mdtidx*.filesfree)
- [[ $numfree -lt 21000 ]] && skip "not enough free inodes ($numfree)" &&
+ [[ $numfree -lt 21000 ]] &&
+ skip "not enough free inodes ($numfree) on MDT$mdtidx" &&
return
[[ $numfree -lt $NUMTEST ]] && NUMTEST=$(($numfree - 50)) &&
- echo "reduced count to $NUMTEST due to inodes"
+ echo "reduced count to $NUMTEST due to inodes on MDT$mdtidx"
# need to check free space for the directories as well
local blkfree=$(lctl get_param -n mdc.$FSNAME-MDT$mdtidx*.kbytesavail)
numfree=$((blkfree / 4))
- [[ $numfree -lt $NUMTEST ]] && NUMTEST=$(($numfree - 50)) &&
- echo "reduced count to $NUMTEST due to blocks"
+ [[ $numfree -lt $NUMTEST ]] && NUMTEST=$((numfree - 50)) &&
+ echo "reduced count to $NUMTEST due to blocks on MDT$mdtidx"
createmany -d $BASE/d $NUMTEST && echo $NUMTEST > $BASE/fnum ||
+ {
+ $LFS df
+ $LFS df -i
echo "failed" > $BASE/fnum
+ error "failed to create $NUMTEST subdirs in MDT$mdtidx:$BASE"
+ }
}
run_test 51b "exceed 64k subdirectory nlink limit"
}
run_test 56v "check 'lfs find -mdt match with lfs getstripe -M' ======="
-# Get and check the actual stripe count of one file.
-# Usage: check_stripe_count <file> <expected_stripe_count>
-check_stripe_count() {
- local file=$1
- local expected=$2
- local actual
-
- [[ -z "$file" || -z "$expected" ]] &&
- error "check_stripe_count: invalid argument!"
-
- local cmd="$GETSTRIPE -c $file"
- actual=$($cmd) || error "$cmd failed"
- actual=${actual%% *}
-
- if [[ $actual -ne $expected ]]; then
- [[ $expected -eq -1 ]] ||
- error "$cmd wrong: found $actual, expected $expected"
- [[ $actual -eq $OSTCOUNT ]] ||
- error "$cmd wrong: found $actual, expected $OSTCOUNT"
- fi
-}
-
test_56w() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
TDIR=$DIR/${tdir}w
setfattr --remove=$trusted.$name $file1 2> /dev/null
done
+ if [ $(lustre_version_code $SINGLEMDS) -gt $(version_code 2.6.50) ]
+ then
+ name="lfsck_ns"
+ # Try to copy xattr from $file0 to $file1.
+ value=$(getxattr $file0 trusted.$name 2> /dev/null)
+
+ setfattr --name=trusted.$name --value="$value" $file1 ||
+ error "setxattr 'trusted.$name' failed"
+
+ # Try to set a garbage xattr.
+ value=0sVGhlIHF1aWNrIGJyb3duIGZveCBqdW1wcyBvdmVyIGl0c2VsZi4=
+
+ setfattr --name=trusted.$name --value="$value" $file1 ||
+ error "setxattr 'trusted.$name' failed"
+
+ # Try to remove the xattr from $file1. We don't care if this
+ # appears to succeed or fail, we just don't want there to be
+ # any changes or crashes.
+ setfattr --remove=$trusted.$name $file1 2> /dev/null
+ fi
+
# Get 'after' xattrs of file1.
getfattr --absolute-names --dump --match=- $file1 > $xattr1
skip_env "could not find setfacl" && return
$GSS && skip "could not run under gss" && return
+ gpasswd -a daemon bin # LU-5641
+
declare -a identity_old
for num in $(seq $MDSCOUNT); do
run_test 133e "Verifying OST {read,write}_bytes nid stats ================="
test_133f() {
- local proc_dirs="/proc/fs/lustre/ /proc/sys/lnet/ /proc/sys/lustre/"
+ local proc_dirs
+
+ local dirs="/proc/fs/lustre/ /proc/sys/lnet/ /proc/sys/lustre/ \
+/sys/fs/lustre/ /sys/fs/lnet/"
+ local dir
+ for dir in $dirs; do
+ if [ -d $dir ]; then
+ proc_dirs="$proc_dirs $dir"
+ fi
+ done
+
local facet
remote_mds_nodsh && skip "remote MDS with nodsh" && return
run_test 133f "Check for LBUGs/Oopses/unreadable files in /proc"
test_133g() {
- local proc_dirs="/proc/fs/lustre/ /proc/sys/lnet/ /proc/sys/lustre/"
+ local proc_dirs
+
+ local dirs="/proc/fs/lustre/ /proc/sys/lnet/ /proc/sys/lustre/ \
+/sys/fs/lustre/ /sys/fs/lnet/"
+ local dir
+ for dir in $dirs; do
+ if [ -d $dir ]; then
+ proc_dirs="$proc_dirs $dir"
+ fi
+ done
+
local facet
# Second verifying readability.
}
run_test 154e ".lustre is not returned by readdir"
+test_154f() {
+ # create parent directory on a single MDT to avoid cross-MDT hardlinks
+ test_mkdir -p -c1 $DIR/$tdir/d
+ # test dirs inherit from its stripe
+ mkdir -p $DIR/$tdir/d/foo1 || error "mkdir error"
+ mkdir -p $DIR/$tdir/d/foo2 || error "mkdir error"
+ cp /etc/hosts $DIR/$tdir/d/foo1/$tfile
+ ln $DIR/$tdir/d/foo1/$tfile $DIR/$tdir/d/foo2/link
+ touch $DIR/f
+
+ # get fid of parents
+ local FID0=$($LFS path2fid $DIR/$tdir/d)
+ local FID1=$($LFS path2fid $DIR/$tdir/d/foo1)
+ local FID2=$($LFS path2fid $DIR/$tdir/d/foo2)
+ local FID3=$($LFS path2fid $DIR)
+
+ # check that path2fid --parents returns expected <parent_fid>/name
+ # 1) test for a directory (single parent)
+ local parent=$($LFS path2fid --parents $DIR/$tdir/d/foo1)
+ [ "$parent" == "$FID0/foo1" ] ||
+ error "expected parent: $FID0/foo1, got: $parent"
+
+ # 2) test for a file with nlink > 1 (multiple parents)
+ parent=$($LFS path2fid --parents $DIR/$tdir/d/foo1/$tfile)
+ echo "$parent" | grep -F "$FID1/$tfile" ||
+ error "$FID1/$tfile not returned in parent list"
+ echo "$parent" | grep -F "$FID2/link" ||
+ error "$FID2/link not returned in parent list"
+
+ # 3) get parent by fid
+ local file_fid=$($LFS path2fid $DIR/$tdir/d/foo1/$tfile)
+ parent=$($LFS path2fid --parents $MOUNT/.lustre/fid/$file_fid)
+ echo "$parent" | grep -F "$FID1/$tfile" ||
+ error "$FID1/$tfile not returned in parent list (by fid)"
+ echo "$parent" | grep -F "$FID2/link" ||
+ error "$FID2/link not returned in parent list (by fid)"
+
+ # 4) test for entry in root directory
+ parent=$($LFS path2fid --parents $DIR/f)
+ echo "$parent" | grep -F "$FID3/f" ||
+ error "$FID3/f not returned in parent list"
+
+ # 5) test it on root directory
+ [ -z "$($LFS path2fid --parents $MOUNT 2>/dev/null)" ] ||
+ error "$MOUNT should not have parents"
+
+ # enable xattr caching and check that linkea is correctly updated
+ local save="$TMP/$TESTSUITE-$TESTNAME.parameters"
+ save_lustre_params client "llite.*.xattr_cache" > $save
+ lctl set_param llite.*.xattr_cache 1
+
+ # 6.1) linkea update on rename
+ mv $DIR/$tdir/d/foo1/$tfile $DIR/$tdir/d/foo2/$tfile.moved
+
+ # get parents by fid
+ parent=$($LFS path2fid --parents $MOUNT/.lustre/fid/$file_fid)
+ # foo1 should no longer be returned in parent list
+ echo "$parent" | grep -F "$FID1" &&
+ error "$FID1 should no longer be in parent list"
+ # the new path should appear
+ echo "$parent" | grep -F "$FID2/$tfile.moved" ||
+ error "$FID2/$tfile.moved is not in parent list"
+
+ # 6.2) linkea update on unlink
+ rm -f $DIR/$tdir/d/foo2/link
+ parent=$($LFS path2fid --parents $MOUNT/.lustre/fid/$file_fid)
+ # foo2/link should no longer be returned in parent list
+ echo "$parent" | grep -F "$FID2/link" &&
+ error "$FID2/link should no longer be in parent list"
+ true
+
+ rm -f $DIR/f
+ restore_lustre_params < $save
+}
+run_test 154f "get parent fids by reading link ea"
+
test_155_small_load() {
local temp=$TMP/$tfile
local file=$DIR/$tfile
trap jobstats_set EXIT
fi
+ local user=$(do_facet $SINGLEMDS $LCTL --device $MDT0 \
+ changelog_register -n)
+ echo "Registered as changelog user $user"
+
# mkdir
cmd="mkdir $DIR/$tfile"
verify_jobstats "$cmd" "mdt"
cmd="mv -f $DIR/$tfile $DIR/jobstats_test_rename"
verify_jobstats "$cmd" "mdt"
+ # Ensure that jobid are present in changelog (if supported by MDS)
+ if [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.52) ]
+ then
+ $LFS changelog $MDT0 | tail -9
+ jobids=$($LFS changelog $MDT0 | tail -9 | grep -c "j=")
+ [ $jobids -eq 9 ] ||
+ error "Wrong changelog jobid count $jobids != 9"
+ fi
+
# cleanup
rm -f $DIR/jobstats_test_rename
# having "abc" as 1st arg, creates $TMP/lnet_abc.out and $TMP/lnet_abc.sys
create_lnet_proc_files() {
- cat /proc/sys/lnet/$1 >$TMP/lnet_$1.out || error "cannot read /proc/sys/lnet/$1"
+ lctl get_param -n $1 >$TMP/lnet_$1.out || error "cannot read lnet.$1"
sysctl lnet.$1 >$TMP/lnet_$1.sys_tmp || error "cannot read lnet.$1"
sed "s/^lnet.$1\ =\ //g" "$TMP/lnet_$1.sys_tmp" >$TMP/lnet_$1.sys
local L2 # regexp for 2nd line (optional)
local BR # regexp for the rest (body)
- # /proc/sys/lnet/stats should look as 11 space-separated non-negative numerics
+ # lnet.stats should look as 11 space-separated non-negative numerics
BR="^$N $N $N $N $N $N $N $N $N $N $N$"
create_lnet_proc_files "stats"
- check_lnet_proc_stats "stats.out" "/proc/sys/lnet/stats" "$BR"
check_lnet_proc_stats "stats.sys" "lnet.stats" "$BR"
remove_lnet_proc_files "stats"
- # /proc/sys/lnet/routes should look like this:
+ # lnet.routes should look like this:
# Routing disabled/enabled
# net hops priority state router
# where net is a string like tcp0, hops > 0, priority >= 0,
L2="^net +hops +priority +state +router$"
BR="^$NET +$N +(0|1) +(up|down) +$NID$"
create_lnet_proc_files "routes"
- check_lnet_proc_entry "routes.out" "/proc/sys/lnet/routes" "$BR" "$L1" "$L2"
check_lnet_proc_entry "routes.sys" "lnet.routes" "$BR" "$L1" "$L2"
remove_lnet_proc_files "routes"
- # /proc/sys/lnet/routers should look like this:
+ # lnet.routers should look like this:
# ref rtr_ref alive_cnt state last_ping ping_sent deadline down_ni router
# where ref > 0, rtr_ref > 0, alive_cnt >= 0, state is up/down,
# last_ping >= 0, ping_sent is boolean (0/1), deadline and down_ni are
L1="^ref +rtr_ref +alive_cnt +state +last_ping +ping_sent +deadline +down_ni +router$"
BR="^$P +$P +$N +(up|down) +$N +(0|1) +$I +$I +$NID$"
create_lnet_proc_files "routers"
- check_lnet_proc_entry "routers.out" "/proc/sys/lnet/routers" "$BR" "$L1"
check_lnet_proc_entry "routers.sys" "lnet.routers" "$BR" "$L1"
remove_lnet_proc_files "routers"
- # /proc/sys/lnet/peers should look like this:
+ # lnet.peers should look like this:
# nid refs state last max rtr min tx min queue
# where nid is a string like 192.168.1.1@tcp2, refs > 0,
# state is up/down/NA, max >= 0. last, rtr, min, tx, min are
L1="^nid +refs +state +last +max +rtr +min +tx +min +queue$"
BR="^$NID +$P +(up|down|NA) +$I +$N +$I +$I +$I +$I +$N$"
create_lnet_proc_files "peers"
- check_lnet_proc_entry "peers.out" "/proc/sys/lnet/peers" "$BR" "$L1"
check_lnet_proc_entry "peers.sys" "lnet.peers" "$BR" "$L1"
remove_lnet_proc_files "peers"
- # /proc/sys/lnet/buffers should look like this:
+ # lnet.buffers should look like this:
# pages count credits min
# where pages >=0, count >=0, credits and min are numeric (0 or >0 or <0)
L1="^pages +count +credits +min$"
BR="^ +$N +$N +$I +$I$"
create_lnet_proc_files "buffers"
- check_lnet_proc_entry "buffers.out" "/proc/sys/lnet/buffers" "$BR" "$L1"
check_lnet_proc_entry "buffers.sys" "lnet.buffers" "$BR" "$L1"
remove_lnet_proc_files "buffers"
- # /proc/sys/lnet/nis should look like this:
+ # lnet.nis should look like this:
# nid status alive refs peer rtr max tx min
# where nid is a string like 192.168.1.1@tcp2, status is up/down,
# alive is numeric (0 or >0 or <0), refs >= 0, peer >= 0,
L1="^nid +status +alive +refs +peer +rtr +max +tx +min$"
BR="^$NID +(up|down) +$I +$N +$N +$N +$N +$I +$I$"
create_lnet_proc_files "nis"
- check_lnet_proc_entry "nis.out" "/proc/sys/lnet/nis" "$BR" "$L1"
check_lnet_proc_entry "nis.sys" "lnet.nis" "$BR" "$L1"
remove_lnet_proc_files "nis"
- # can we successfully write to /proc/sys/lnet/stats?
- echo "0" >/proc/sys/lnet/stats || error "cannot write to /proc/sys/lnet/stats"
+ # can we successfully write to lnet.stats?
+ lctl set_param -n stats=0 || error "cannot write to lnet.stats"
sysctl -w lnet.stats=0 || error "cannot write to lnet.stats"
}
-run_test 215 "/proc/sys/lnet exists and has proper content - bugs 18102, 21079, 21517"
+run_test 215 "lnet exists and has proper content - bugs 18102, 21079, 21517"
test_216() { # bug 20317
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
touch $DIR/$tdir/$tfile || error "touch failed"
# OBD_FAIL_LLITE_XATTR_ENOMEM
$LCTL set_param fail_loc=0x1405
- if [ ! -f /etc/SuSE-release ]; then
+ # output of the form: attr 2 4 44 3 fc13 x86_64
+ V=($(IFS=".-" rpm -q attr))
+ if [[ ${V[1]} > 2 || ${V[2]} > 4 || ${V[3]} > 44 ||
+ ${V[1]} = 2 && ${V[2]} = 4 && ${V[3]} = 44 && ${V[4]} > 6 ]]; then
# attr pre-2.4.44-7 had a bug with rc
- # LU-3703 - SLES clients have older attr
+ # LU-3703 - SLES 11 and FC13 clients have older attr
getfattr -n user.attr $DIR/$tdir/$tfile &&
error "getfattr should have failed with ENOMEM"
+ else
+ skip "LU-3703: attr version $(getfattr --version) too old"
fi
$LCTL set_param fail_loc=0x0
rm -rf $DIR/$tdir
run_test 238 "Verify linkea consistency"
test_239() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.5.60) ] &&
+ skip "Need MDS version at least 2.5.60" && return
local list=$(comma_list $(mdts_nodes))
mkdir -p $DIR/$tdir
}
run_test 240 "race between ldlm enqueue and the connection RPC (no ASSERT)"
+test_241_bio() {
+ for LOOP in $(seq $1); do
+ dd if=$DIR/$tfile of=/dev/null bs=40960 count=1 2>/dev/null
+ cancel_lru_locks osc
+ done
+}
+
+test_241_dio() {
+ for LOOP in $(seq $1); do
+ dd if=$DIR/$tfile of=/dev/null bs=40960 count=1 \
+ iflag=direct 2>/dev/null
+ done
+}
+
+test_241() {
+ dd if=/dev/zero of=$DIR/$tfile count=1 bs=40960
+ ls -la $DIR/$tfile
+ cancel_lru_locks osc
+ test_241_bio 1000 &
+ PID=$!
+ test_241_dio 1000
+ wait $PID
+}
+run_test 241 "bio vs dio"
+
cleanup_test_300() {
trap 0
umask $SAVE_UMASK
local ls
#define OBD_FAIL_MGC_PAUSE_PROCESS_LOG 0x903
$LCTL set_param fail_loc=0x903
- # cancel_lru_locks mgc - does not work due to lctl set_param syntax
- for ls in /proc/fs/lustre/ldlm/namespaces/MGC*/lru_size; do
- echo "clear" > $ls
- done
+
+ cancel_lru_locks MGC
+
FAIL_ON_ERROR=true cleanup
FAIL_ON_ERROR=true setup
}
git://git.whamcloud.com / fs / lustre-release.git / blobdiff