set -e
ONLY=${ONLY:-"$*"}
-# bug number for skipped test: 2108 9789 3637 9789 3561 12653 12653 13310 10764
-ALWAYS_EXCEPT=" 42a 42b 42c 42d 45 65a 65e 74b 75 $SANITY_EXCEPT"
+# bug number for skipped test: 2108 9789 3637 9789 3561 12622 12653 12653 10764
+ALWAYS_EXCEPT=" 42a 42b 42c 42d 45 51d 65a 65e 75 $SANITY_EXCEPT"
# bug number for skipped test: 2108 9789 3637 9789 3561 5188/5749 1443
#ALWAYS_EXCEPT=${ALWAYS_EXCEPT:-"27m 42a 42b 42c 42d 45 68 76"}
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
*) error "unsupported kernel" ;;
esac
-SRCDIR=`dirname $0`
-export PATH=$PWD/$SRCDIR:$SRCDIR:$SRCDIR/../utils:$PATH:/sbin
+SRCDIR=$(cd $(dirname $0); echo $PWD)
+export PATH=$PATH:/sbin
TMP=${TMP:-/tmp}
CLEANUP=${CLEANUP:-:}
SETUP=${SETUP:-:}
TRACE=${TRACE:-""}
-LUSTRE=${LUSTRE:-`dirname $0`/..}
+LUSTRE=${LUSTRE:-$(cd $(dirname $0)/..; echo $PWD)}
. $LUSTRE/tests/test-framework.sh
init_test_env $@
. ${CONFIG:=$LUSTRE/tests/cfg/${NAME}.sh}
cleanup() {
echo -n "cln.."
+ pgrep ll_sa > /dev/null && { echo "There are ll_sa thread not exit!"; exit 20; }
cleanupall ${FORCE} $* || { echo "FAILed to clean up"; exit 20; }
}
setup() {
check_and_setup_lustre
DIR=${DIR:-$MOUNT}
-[ -z "`echo $DIR | grep $MOUNT`" ] && echo "$DIR not in $MOUNT" && exit 99
+assert_DIR
LOVNAME=`lctl get_param -n llite.*.lov.common_name | tail -n 1`
OSTCOUNT=`lctl get_param -n lov.$LOVNAME.numobd`
umask 077
-OLDDEBUG="`sysctl -n lnet.debug 2> /dev/null`"
-sysctl -w lnet.debug=-1 2> /dev/null || true
+OLDDEBUG="`lctl get_param -n debug 2> /dev/null`"
+lctl set_param debug=-1 2> /dev/null || true
test_0() {
touch $DIR/$tfile
$CHECKSTAT -t file $DIR/$tfile || error
test_22() {
WDIR=$DIR/$tdir
+ mkdir -p $WDIR
chown $RUNAS_ID $WDIR
(cd $WDIR || error "cd $WDIR failed";
$RUNAS tar cf - /etc/hosts /etc/sysconfig/network | \
# recursive symlinks (bug 7022)
test_26f() {
+ mkdir -p $DIR/$tdir
mkdir $DIR/$tdir/$tfile || error "mkdir $DIR/$tdir/$tfile failed"
cd $DIR/$tdir/$tfile || error "cd $DIR/$tdir/$tfile failed"
mkdir -p lndir/bar1 || error "mkdir lndir/bar1 failed"
[ "$1" ] && FAIL_LOC=$1 || FAIL_LOC=0
mkdir -p $DIR/d27/nospc
rmdir $DIR/d27/nospc
- sysctl -w lustre.fail_loc=$FAIL_LOC
+ lctl set_param fail_loc=$FAIL_LOC
}
exhaust_precreations() {
mkdir -p $DIR/d27/${OST}
$SETSTRIPE $DIR/d27/${OST} -i $OSTIDX -c 1
#define OBD_FAIL_OST_ENOSPC 0x215
- sysctl -w lustre.fail_loc=0x215
+ lctl set_param fail_loc=0x215
echo "Creating to objid $last_id on ost $OST..."
createmany -o $DIR/d27/${OST}/f $next_id $((last_id - next_id + 2))
lctl get_param -n osc.*${OST}-osc-MDT0000.prealloc* | grep '[0-9]'
#define OBD_FAIL_MDS_OSC_PRECREATE 0x13d
- sysctl -w lustre.fail_loc=0x13d
+ lctl set_param fail_loc=0x13d
mkdir -p $DIR/d27u
createmany -o $DIR/d27u/t- 1000
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
TLOG=$DIR/$tfile.getstripe
$GETSTRIPE $DIR/d27u > $TLOG
touch $DIR/$tdir/$tfile
#define OBD_FAIL_TGT_DELAY_PRECREATE 0x705
- sysctl -w lustre.fail_loc=0x705
+ lctl set_param fail_loc=0x705
START=`date +%s`
for F in `seq 1 32`; do
touch $DIR/$tdir/$tfile.$F
done
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
FINISH=`date +%s`
- TIMEOUT=`sysctl -n lustre.timeout`
+ TIMEOUT=`lctl get_param -n timeout`
[ $((FINISH - START)) -ge $((TIMEOUT / 2)) ] && \
error "$FINISH - $START >= $TIMEOUT / 2"
DATESTR="Dec 20 2000"
mkdir -p $DIR/$tdir
#define OBD_FAIL_OST_BRW_PAUSE_BULK 0x214
- sysctl -w lustre.fail_loc=0x80000214
+ lctl set_param fail_loc=0x80000214
date; date +%s
cp /etc/hosts $DIR/$tdir/$tfile
sync & # write RPC generated with "current" inode timestamp, but delayed
# in 2.6, restore /proc/sys/vm/dirty_writeback_centisecs,
# dirty_ratio, dirty_background_ratio
if [ -f /proc/sys/vm/dirty_writeback_centisecs ]; then
- echo $WRITEBACK_SAVE > /proc/sys/vm/dirty_writeback_centisecs
- echo $BG_DIRTY_RATIO_SAVE > /proc/sys/vm/dirty_background_ratio
- echo $DIRTY_RATIO_SAVE > /proc/sys/vm/dirty_ratio
+ sysctl -w vm.dirty_writeback_centisecs=$WRITEBACK_SAVE
+ sysctl -w vm.dirty_background_ratio=$BG_DIRTY_RATIO_SAVE
+ sysctl -w vm.dirty_ratio=$DIRTY_RATIO_SAVE
else
# if file not here, we are a 2.4 kernel
kill -CONT `pidof kupdated`
trap start_writeback EXIT
# in 2.6, save and 0 /proc/sys/vm/dirty_writeback_centisecs
if [ -f /proc/sys/vm/dirty_writeback_centisecs ]; then
- WRITEBACK_SAVE=`cat /proc/sys/vm/dirty_writeback_centisecs`
- echo 0 > /proc/sys/vm/dirty_writeback_centisecs
- echo 0 > /proc/sys/vm/dirty_writeback_centisecs
+ WRITEBACK_SAVE=`sysctl -n vm.dirty_writeback_centisecs`
+ sysctl -w vm.dirty_writeback_centisecs=0
+ sysctl -w vm.dirty_writeback_centisecs=0
# save and increase /proc/sys/vm/dirty_ratio
- DIRTY_RATIO_SAVE=`cat /proc/sys/vm/dirty_ratio`
- echo $MAX_DIRTY_RATIO > /proc/sys/vm/dirty_ratio
+ DIRTY_RATIO_SAVE=`sysctl -n vm.dirty_ratio`
+ sysctl -w vm.dirty_ratio=$MAX_DIRTY_RATIO
# save and increase /proc/sys/vm/dirty_background_ratio
- BG_DIRTY_RATIO_SAVE=`cat /proc/sys/vm/dirty_background_ratio`
- echo $MAX_BG_DIRTY_RATIO > /proc/sys/vm/dirty_background_ratio
+ BG_DIRTY_RATIO_SAVE=`sysctl -n vm.dirty_background_ratio`
+ sysctl -w vm.dirty_background_ratio=$MAX_BG_DIRTY_RATIO
else
# if file not here, we are a 2.4 kernel
kill -STOP `pidof kupdated`
run_test 42d "test complete truncate of file with cached dirty data"
test_43() {
+ mkdir -p $DIR/$tdir
cp -p /bin/ls $DIR/$tdir/$tfile
multiop $DIR/$tdir/$tfile Ow_c &
pid=$!
test_48c() { # bug 2350
check_kernel_version 36 || return 0
- #sysctl -w lnet.debug=-1
+ #lctl set_param debug=-1
#set -vx
mkdir -p $DIR/d48c/dir
cd $DIR/d48c/dir
test_48d() { # bug 2350
check_kernel_version 36 || return 0
- #sysctl -w lnet.debug=-1
+ #lctl set_param debug=-1
#set -vx
mkdir -p $DIR/d48d/dir
cd $DIR/d48d/dir
test_48e() { # bug 4134
check_kernel_version 41 || return 0
- #sysctl -w lnet.debug=-1
+ #lctl set_param debug=-1
#set -vx
mkdir -p $DIR/d48e/dir
cd $DIR/d48e/dir
}
run_test 50 "special situations: /proc symlinks ==============="
-test_51() {
+test_51a() { # was test_51
# bug 1516 - create an empty entry right after ".." then split dir
mkdir $DIR/d51
touch $DIR/d51/foo
echo
ls -l $DIR/d51 > /dev/null || error
}
-run_test 51 "special situations: split htree with empty entry =="
+run_test 51a "special situations: split htree with empty entry =="
#export NUMTEST=70000
# FIXME: I select a relatively small number to do basic test.
}
run_test 55 "check iopen_connect_dentry() ======================"
-test_56() {
+test_56a() { # was test_56
rm -rf $DIR/d56
$SETSTRIPE -d $DIR
mkdir $DIR/d56
error "lfs getstripe --obd wrong: should not show file on other obd"
echo "lfs getstripe --obd passed."
}
-run_test 56 "check lfs getstripe ===================================="
+run_test 56a "check lfs getstripe ===================================="
NUMFILES=3
NUMDIRS=3
echo "create 5000 files"
createmany -o $DIR/f60c- 5000
#define OBD_FAIL_MDS_LLOG_CREATE_FAILED 0x13c
- sysctl -w lustre.fail_loc=0x8000013c
+ lctl set_param fail_loc=0x8000013c
unlinkmany $DIR/f60c- 5000
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
}
run_test 60c "unlink file when mds full"
test_60d() {
- SAVEPRINTK=$(sysctl -n lnet.printk)
+ SAVEPRINTK=$(lctl get_param -n printk)
# verify "lctl mark" is even working"
MESSAGE="test message ID $RANDOM $$"
$LCTL mark "$MESSAGE" || error "$LCTL mark failed"
dmesg | grep -q "$MESSAGE" || error "didn't find debug marker in log"
- sysctl -w lnet.printk=0 || error "set lnet.printk failed"
- sysctl -n lnet.printk | grep emerg || error "lnet.printk dropped emerg"
-
+ lctl set_param printk=0 || error "set lnet.printk failed"
+ lctl get_param -n printk | grep emerg || error "lnet.printk dropped emerg"
MESSAGE="new test message ID $RANDOM $$"
# Assume here that libcfs_debug_mark_buffer() uses D_WARNING
$LCTL mark "$MESSAGE" || error "$LCTL mark failed"
dmesg | grep -q "$MESSAGE" && error "D_WARNING wasn't masked" || true
- sysctl -w lnet.printk="$SAVEPRINTK"
+ lctl set_param -n printk="$SAVEPRINTK"
}
run_test 60d "test printk console message masking"
f="$DIR/f62"
echo foo > $f
cancel_lru_locks osc
- sysctl -w lustre.fail_loc=0x405
+ lctl set_param fail_loc=0x405
cat $f && error "cat succeeded, expect -EIO"
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
}
-run_test 62 "verify obd_match failure doesn't LBUG (should -EIO)"
+# This test is now irrelevant (as of bug 10718 inclusion), we no longer
+# match every page all of the time.
+#run_test 62 "verify obd_match failure doesn't LBUG (should -EIO)"
# bug 2319 - oig_wait() interrupted causes crash because of invalid waitq.
-test_63() {
+test_63a() { # was test_63
MAX_DIRTY_MB=`lctl get_param -n osc.*.max_dirty_mb | head -n 1`
lctl set_param -n osc.*.max_dirty_mb 0
for i in `seq 10` ; do
lctl set_param -n osc.*.max_dirty_mb $MAX_DIRTY_MB
rm -f $DIR/f63 || true
}
-run_test 63 "Verify oig_wait interruption does not crash ======="
+run_test 63a "Verify oig_wait interruption does not crash ======="
# bug 2248 - async write errors didn't return to application on sync
# bug 3677 - async write errors left page locked
test_63b() {
debugsave
- sysctl -w lnet.debug=-1
+ lctl set_param debug=-1
# ensure we have a grant to do async writes
dd if=/dev/zero of=$DIR/$tfile bs=4k count=1
rm $DIR/$tfile
#define OBD_FAIL_OSC_BRW_PREP_REQ 0x406
- sysctl -w lustre.fail_loc=0x80000406
+ lctl set_param fail_loc=0x80000406
multiop $DIR/$tfile Owy && \
error "sync didn't return ENOMEM"
sync; sleep 2; sync # do a real sync this time to flush page
$DIRECTIO write ${f}.2 0 1 || error "directio write error"
- sysctl -w lustre.fail_loc=0x217
+ lctl set_param fail_loc=0x217
truncate $f 1 # vmtruncate() will ignore truncate() error.
$DIRECTIO write $f 0 2 && error "write succeeded, expect -ENOENT"
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
$DIRECTIO write $f 0 2 || error "write error"
cancel_lru_locks osc
$DIRECTIO read $f 0 1 || error "read error"
- sysctl -w lustre.fail_loc=0x217
+ lctl set_param fail_loc=0x217
$DIRECTIO read $f 1 1 && error "read succeeded, expect -ENOENT"
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
rm -f $f
}
run_test 69 "verify oa2dentry return -ENOENT doesn't LBUG ======"
multiop_bg_pause $DIR/d73-1/f73-1 O_c || return 1
pid1=$!
- echo 0x80000129 > /proc/sys/lustre/fail_loc
+ lctl set_param fail_loc=0x80000129
multiop $DIR/d73-1/f73-2 Oc &
sleep 1
- echo 0 > /proc/sys/lustre/fail_loc
+ lctl set_param fail_loc=0
multiop $DIR/d73-2/f73-3 Oc &
pid3=$!
# very important to OR with OBD_FAIL_ONCE (0x80000000) -- otherwise it
# will spin in a tight reconnection loop
touch $DIR/f74a
- sysctl -w lustre.fail_loc=0x8000030e
+ lctl set_param fail_loc=0x8000030e
# get any lock that won't be difficult - lookup works.
ls $DIR/f74a
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
true
}
run_test 74a "ldlm_enqueue freed-export error path, ls (shouldn't LBUG)"
#
# very important to OR with OBD_FAIL_ONCE (0x80000000) -- otherwise it
# will spin in a tight reconnection loop
- sysctl -w lustre.fail_loc=0x8000030e
+ lctl set_param fail_loc=0x8000030e
# get a "difficult" lock
touch $DIR/f74b
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
true
}
run_test 74b "ldlm_enqueue freed-export error path, touch (shouldn't LBUG)"
[ "$ORIG_CSUM_TYPE" ] || \
ORIG_CSUM_TYPE=`lctl get_param -n osc/*osc-[^mM]*/checksum_type |
sed 's/.*\[\(.*\)\].*/\1/g' | head -n1`
- lctl set_param -n osc.*osc-*.checksum_type $1
+ lctl set_param -n osc.*osc-[^mM]*.checksum_type $1
log "set checksum type to $1"
return 0
}
test_77b() { # bug 10889
[ ! -f $F77_TMP ] && setup_f77
#define OBD_FAIL_OSC_CHECKSUM_SEND 0x409
- sysctl -w lustre.fail_loc=0x80000409
+ lctl set_param fail_loc=0x80000409
set_checksums 1
dd if=$F77_TMP of=$DIR/f77b bs=1M count=$F77SZ conv=sync || \
error "dd error: $?"
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
set_checksums 0
}
run_test 77b "checksum error on client write ===================="
cancel_lru_locks osc
set_checksum_type $algo
#define OBD_FAIL_OSC_CHECKSUM_RECEIVE 0x408
- sysctl -w lustre.fail_loc=0x80000408
+ lctl set_param fail_loc=0x80000408
cmp $F77_TMP $DIR/f77b || error "file compare failed"
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
done
set_checksums 0
set_checksum_type $ORIG_CSUM_TYPE
test_77d() { # bug 10889
#define OBD_FAIL_OSC_CHECKSUM_SEND 0x409
- sysctl -w lustre.fail_loc=0x80000409
+ lctl set_param fail_loc=0x80000409
set_checksums 1
directio write $DIR/f77 0 $F77SZ $((1024 * 1024)) || \
error "direct write: rc=$?"
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
set_checksums 0
}
run_test 77d "checksum error on OST direct write ==============="
test_77e() { # bug 10889
[ ! -f $DIR/f77 ] && skip "requires 77d - skipping" && return
#define OBD_FAIL_OSC_CHECKSUM_RECEIVE 0x408
- sysctl -w lustre.fail_loc=0x80000408
+ lctl set_param fail_loc=0x80000408
set_checksums 1
cancel_lru_locks osc
directio read $DIR/f77 0 $F77SZ $((1024 * 1024)) || \
error "direct read: rc=$?"
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
set_checksums 0
}
run_test 77e "checksum error on OST direct read ================"
cancel_lru_locks osc
set_checksum_type $algo
#define OBD_FAIL_OSC_CHECKSUM_SEND 0x409
- sysctl -w lustre.fail_loc=0x409
+ lctl set_param fail_loc=0x409
directio write $DIR/f77 0 $F77SZ $((1024 * 1024)) && \
error "direct write succeeded"
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
done
set_checksum_type $ORIG_CSUM_TYPE
set_checksums 0
skip "remote OST" && return
[ ! -f $F77_TMP ] && setup_f77
#define OBD_FAIL_OST_CHECKSUM_RECEIVE 0x21a
- sysctl -w lustre.fail_loc=0x8000021a
+ lctl set_param fail_loc=0x8000021a
set_checksums 1
dd if=$F77_TMP of=$DIR/f77 bs=1M count=$F77SZ || \
error "write error: rc=$?"
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
set_checksums 0
}
run_test 77g "checksum error on OST write ======================"
[ ! -f $DIR/f77 ] && skip "requires 77g - skipping" && return
cancel_lru_locks osc
#define OBD_FAIL_OST_CHECKSUM_SEND 0x21b
- sysctl -w lustre.fail_loc=0x8000021b
+ lctl set_param fail_loc=0x8000021b
set_checksums 1
cmp $F77_TMP $DIR/f77 || error "file compare failed"
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
set_checksums 0
}
run_test 77h "checksum error on OST read ======================="
test_77i() { # bug 13805
#define OBD_FAIL_OSC_CONNECT_CKSUM 0x40b
- sysctl -w lustre.fail_loc=0x40b
+ lctl set_param fail_loc=0x40b
remount_client $MOUNT
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
for VALUE in `lctl get_param osc.*osc-[^mM]*.checksum_type`; do
PARAM=`echo ${VALUE[0]} | cut -d "=" -f1`
algo=`lctl get_param -n $PARAM | sed 's/.*\[\(.*\)\].*/\1/g'`
test_77j() { # bug 13805
#define OBD_FAIL_OSC_CKSUM_ADLER_ONLY 0x40c
- sysctl -w lustre.fail_loc=0x40c
+ lctl set_param fail_loc=0x40c
remount_client $MOUNT
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
for VALUE in `lctl get_param osc.*osc-[^mM]*.checksum_type`; do
PARAM=`echo ${VALUE[0]} | cut -d "=" -f1`
algo=`lctl get_param -n $PARAM | sed 's/.*\[\(.*\)\].*/\1/g'`
}
run_test 79 "df report consistency check ======================="
+test_80() { # bug 10718
+ dd if=/dev/zero of=$DIR/$tfile bs=1M count=1 seek=1M
+ sync; sleep 1; sync
+ BEFORE=`date +%s`
+ cancel_lru_locks OSC
+ AFTER=`date +%s`
+ DIFF=$((AFTER-BEFORE))
+ if [ $DIFF -gt 1 ] ; then
+ error "elapsed for 1M@1T = $DIFF"
+ fi
+ true
+}
+run_test 80 "Page eviction is equally fast at high offsets too ===="
+
# on the LLNL clusters, runas will still pick up root's $TMP settings,
# which will not be writable for the runas user, and then you get a CVS
# error message with a corrupt path string (CVS bug) and panic.
}
run_test 102g "star copy files, keep osts ==========="
+test_102h() { # bug 15777
+ [ -z $(lctl get_param -n mdc.*.connect_flags | grep xattr) ] &&
+ skip "must have user_xattr" && return
+ [ -z "$(which setfattr 2>/dev/null)" ] &&
+ skip "could not find setfattr" && return
+
+ XBIG=trusted.big
+ XSIZE=1024
+ touch $DIR/$tfile
+ VALUE=datadatadatadatadatadatadatadata
+ while [ $(echo $VALUE | wc -c) -lt $XSIZE ]; do
+ VALUE="$VALUE$VALUE"
+ done
+ log "save $XBIG on $DIR/$tfile"
+ setfattr -n $XBIG -v "$VALUE" $DIR/$tfile ||
+ error "saving $XBIG on $DIR/$tfile failed"
+ ORIG=$(getfattr -n $XBIG $DIR/$tfile 2> /dev/null | grep $XBIG)
+ OSIZE=$(echo $ORIG | wc -c)
+ [ $OSIZE -lt $XSIZE ] && error "set $XBIG too small ($OSIZE < $XSIZE)"
+
+ XSML=trusted.sml
+ log "save $XSML on $DIR/$tfile"
+ setfattr -n $XSML -v val $DIR/$tfile ||
+ error "saving $XSML on $DIR/$tfile failed"
+ NEW=$(getfattr -n $XBIG $DIR/$tfile 2> /dev/null | grep $XBIG)
+ if [ "$NEW" != "$ORIG" ]; then
+ log "orig: $ORIG"
+ log "new: $NEW"
+ error "$XBIG different after saving $XSML"
+ fi
+
+ log "grow $XSML on $DIR/$tfile"
+ setfattr -n $XSML -v "$VALUE" $DIR/$tfile ||
+ error "growing $XSML on $DIR/$tfile failed"
+ NEW=$(getfattr -n $XBIG $DIR/$tfile 2> /dev/null | grep $XBIG)
+ if [ "$NEW" != "$ORIG" ]; then
+ log "orig: $ORIG"
+ log "new: $NEW"
+ error "$XBIG different after growing $XSML"
+ fi
+ log "$XBIG still valid after growing $XSML"
+}
+run_test 102h "grow xattr from inside inode to external block"
+
run_acl_subtest()
{
$LUSTRE/tests/acl/run $LUSTRE/tests/acl/$1.test
run_test 105c "lockf when mounted without -o flock test ========"
test_106() { #bug 10921
+ mkdir -p $DIR/$tdir
$DIR/$tdir && error "exec $DIR/$tdir succeeded"
chmod 777 $DIR/$tdir || error "chmod $DIR/$tdir failed"
}
sleep 60 &
SLEEPPID=$!
- file=`cat /proc/sys/kernel/core_pattern`
- core_pid=`cat /proc/sys/kernel/core_uses_pid`
+ file=`sysctl -n kernel.core_pattern`
+ core_pid=`sysctl -n kernel.core_uses_pid`
[ $core_pid -eq 1 ] && file=$file.$SLEEPPID
rm -f $file
sleep 1
{
dd if=/dev/zero of=$DIR/$tfile bs=1M count=1
#define OBD_FAIL_OST_SETATTR_CREDITS 0x21e
- sysctl -w lustre.fail_loc=0x21e
+ lctl set_param fail_loc=0x21e
> $DIR/$tfile || error "truncate failed"
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
echo "Truncate succeeded."
}
run_test 117 "verify fsfilt_extend =========="
reset_async
#define OBD_FAIL_OSC_BRW_PREP_REQ2 0x40a
- sysctl -w lustre.fail_loc=0x8000040a
+ lctl set_param fail_loc=0x8000040a
# Should simulate EINVAL error which is fatal
multiop $DIR/$tfile oO_CREAT:O_RDWR:O_SYNC:w4096c
error "Must return error due to dropped pages, rc=$RC"
fi
- sysctl -w lustre.fail_loc=0x0
+ lctl set_param fail_loc=0x0
LOCKED=$(lctl get_param -n llite.*.dump_page_cache | grep -c locked)
DIRTY=$(lctl get_param -n llite.*.dump_page_cache | grep -c dirty)
run_test 118f "Simulate unrecoverable OSC side error =========="
test_118g() {
- reset_async
+ reset_async
#define OBD_FAIL_OSC_BRW_PREP_REQ 0x406
- sysctl -w lustre.fail_loc=0x406
+ lctl set_param fail_loc=0x406
# simulate local -ENOMEM
- multiop $DIR/$tfile oO_CREAT:O_RDWR:O_SYNC:w4096c
- RC=$?
+ multiop $DIR/$tfile oO_CREAT:O_RDWR:O_SYNC:w4096c
+ RC=$?
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
if [[ $RC -eq 0 ]]; then
error "Must return error due to dropped pages, rc=$RC"
fi
- LOCKED=$(lctl get_param -n llite.*.dump_page_cache | grep -c locked)
- DIRTY=$(lctl get_param -n llite.*.dump_page_cache | grep -c dirty)
- WRITEBACK=$(lctl get_param -n llite.*.dump_page_cache |
- grep -c writeback)
+ LOCKED=$(lctl get_param -n llite.*.dump_page_cache | grep -c locked)
+ DIRTY=$(lctl get_param -n llite.*.dump_page_cache | grep -c dirty)
+ WRITEBACK=$(lctl get_param -n llite.*.dump_page_cache |
+ grep -c writeback)
if [[ $LOCKED -ne 0 ]]; then
error "Locked pages remain in cache, locked=$LOCKED"
fi
rm -f $DIR/$tfile
echo "No pages locked after fsync"
- reset_async
+ reset_async
return 0
}
run_test 118g "Don't stay in wait if we got local -ENOMEM =========="
run_test 119c "Testing for direct read hitting hole"
test_120a() {
+ mkdir -p $DIR/$tdir
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
lru_resize_disable mdc
run_test 120a "Early Lock Cancel: mkdir test"
test_120b() {
+ mkdir -p $DIR/$tdir
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
lru_resize_disable mdc
run_test 120b "Early Lock Cancel: create test"
test_120c() {
+ mkdir -p $DIR/$tdir
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
lru_resize_disable mdc
run_test 120c "Early Lock Cancel: link test"
test_120d() {
+ mkdir -p $DIR/$tdir
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
lru_resize_disable mdc
run_test 120d "Early Lock Cancel: setattr test"
test_120e() {
+ mkdir -p $DIR/$tdir
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
lru_resize_disable mdc
test_120f() {
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
+ mkdir -p $DIR/$tdir
lru_resize_disable mdc
lru_resize_disable osc
mkdir -p $DIR/$tdir/d1 $DIR/$tdir/d2
rm -rf $DIR/$tfile
writes=$(LANG=C dd if=/dev/zero of=$DIR/$tfile count=1 2>&1 | awk -F '+' '/out/ {print $1}')
#define OBD_FAIL_LDLM_CANCEL_RACE 0x310
- sysctl -w lustre.fail_loc=0x310
+ lctl set_param fail_loc=0x310
cancel_lru_locks osc > /dev/null
reads=$(LANG=C dd if=$DIR/$tfile of=/dev/null 2>&1 | awk -F '+' '/in/ {print $1}')
- sysctl -w lustre.fail_loc=0
+ lctl set_param fail_loc=0
[ "$reads" -eq "$writes" ] || error "read" $reads "blocks, must be" $writes
}
run_test 121 "read cancel race ========="
+test_123a() { # was test 123, statahead(bug 11401)
+ if [ -z "$(grep "processor.*: 1" /proc/cpuinfo)" ]; then
+ log "testing on UP system. Performance may be not as good as expected."
+ fi
+
+ remount_client $MOUNT
+ mkdir -p $DIR/$tdir
+ error=0
+ NUMFREE=`df -i -P $DIR | tail -n 1 | awk '{ print $4 }'`
+ [ $NUMFREE -gt 100000 ] && NUMFREE=100000 || NUMFREE=$((NUMFREE-1000))
+ MULT=10
+ for ((i=1, j=0; i<=$NUMFREE; j=$i, i=$((i * MULT)) )); do
+ createmany -o $DIR/$tdir/$tfile $j $((i - j))
+
+ lctl get_param -n llite.*.statahead_max | grep '[0-9]'
+ cancel_lru_locks mdc
+ cancel_lru_locks osc
+ stime=`date +%s`
+ ls -l $DIR/$tdir > /dev/null
+ etime=`date +%s`
+ delta_sa=$((etime - stime))
+ log "ls $i files with statahead: $delta_sa sec"
+ lctl get_param -n llite.*.statahead_stats
+
+ max=`lctl get_param -n llite.*.statahead_max | head -n 1`
+ lctl set_param -n llite.*.statahead_max 0
+ lctl get_param llite.*.statahead_max
+ cancel_lru_locks mdc
+ cancel_lru_locks osc
+ stime=`date +%s`
+ ls -l $DIR/$tdir > /dev/null
+ etime=`date +%s`
+ delta=$((etime - stime))
+ log "ls $i files without statahead: $delta sec"
+
+ lctl set_param llite.*.statahead_max=$max
+ if [ $delta_sa -gt $(($delta + 2)) ]; then
+ log "ls $i files is slower with statahead!"
+ error=1
+ fi
+
+ [ $delta -gt 20 ] && break
+ [ $delta -gt 8 ] && MULT=$((50 / delta))
+ [ "$SLOW" = "no" -a $delta -gt 3 ] && break
+ done
+ log "ls done"
+
+ stime=`date +%s`
+ rm -r $DIR/$tdir
+ sync
+ etime=`date +%s`
+ delta=$((etime - stime))
+ log "rm -r $DIR/$tdir/: $delta seconds"
+ log "rm done"
+ lctl get_param -n llite.*.statahead_stats
+ # wait for commitment of removal
+ sleep 2
+ [ $error -ne 0 ] && error "statahead is slow!"
+ return 0
+}
+run_test 123a "verify statahead work"
+
+test_123b () { # statahead(bug 15027)
+ mkdir -p $DIR/$tdir
+ createmany -o $DIR/$tdir/$tfile-%d 1000
+
+ cancel_lru_locks mdc
+ cancel_lru_locks osc
+
+#define OBD_FAIL_MDC_GETATTR_ENQUEUE 0x803
+ lctl set_param fail_loc=0x80000803
+ ls -lR $DIR/$tdir > /dev/null
+ log "ls done"
+ lctl set_param fail_loc=0x0
+ lctl get_param -n llite.*.statahead_stats
+ rm -r $DIR/$tdir
+ sync
+
+}
+run_test 123b "not panic with network error in statahead enqueue (bug 15027)"
+
test_124a() {
[ -z "`lctl get_param -n mdc.*.connect_flags | grep lru_resize`" ] && \
skip "no lru resize on server" && return 0
}
run_test 127 "verify the client stats are sane"
+test_128() { # bug 15212
+ touch $DIR/$tfile
+ $LFS 2>&1 <<-EOF | tee $TMP/$tfile.log
+ find $DIR/$tfile
+ find $DIR/$tfile
+ EOF
+
+ result=$(grep error $TMP/$tfile.log)
+ rm -f $DIR/$tfile
+ [ -z "$result" ] || error "consecutive find's under interactive lfs failed"
+}
+run_test 128 "interactive lfs for 2 consecutive find's"
+
+test_129() {
+ [ "$FSTYPE" != "ldiskfs" ] && skip "not needed for FSTYPE=$FSTYPE" && return 0
+
+ DEV=$(basename $(do_facet mds lctl get_param -n osd.*MDT*.mntdev))
+ [ -z "$DEV" ] && error "can't access mds mntdev"
+ EFBIG=27
+ LDPROC=/proc/fs/ldiskfs/$DEV/max_dir_size
+ MAX=16384
+
+ do_facet mds "echo $MAX > $LDPROC"
+
+ mkdir -p $DIR/$tdir
+
+ I=0
+ J=0
+ while [ ! $I -gt $MAX ]; do
+ multiop $DIR/$tdir/$J Oc
+ rc=$?
+ if [ $rc -eq $EFBIG ]; then
+ do_facet mds "echo 0 >$LDPROC"
+ echo "return code $rc received as expected"
+ return 0
+ elif [ $rc -ne 0 ]; then
+ do_facet mds "echo 0 >$LDPROC"
+ error_exit "return code $rc received instead of expected $EFBIG"
+ fi
+ J=$((J+1))
+ I=$(stat -c%s "$DIR/$tdir")
+ done
+
+ error "exceeded dir size limit: $I bytes"
+ do_facet mds "echo 0 >$LDPROC"
+}
+run_test 129 "test directory size limit ========================"
+
+
TMPDIR=$OLDTMPDIR
TMP=$OLDTMP
HOME=$OLDHOME
log "cleanup: ======================================================"
check_and_cleanup_lustre
if [ "$I_MOUNTED" != "yes" ]; then
- sysctl -w lnet.debug="$OLDDEBUG" 2> /dev/null || true
+ lctl set_param debug="$OLDDEBUG" 2> /dev/null || true
fi
echo '=========================== finished ==============================='