#!/bin/bash
-# -*- mode: Bash; tab-width: 4; indent-tabs-mode: t; -*-
-# vim:autoindent:shiftwidth=4:tabstop=4:
#
# Run select tests by setting ONLY, or as arguments to the script.
# Skip specific tests by setting EXCEPT.
run_test 39i "write, rename, stat =============================="
test_39j() {
+ debugsave
+ lctl set_param debug=-1
touch $DIR1/$tfile
sleep 1
cancel_lru_locks osc
if [ $i = 0 ] ; then echo "repeat after cancel_lru_locks"; fi
done
+ debugrestore
}
run_test 39j "write, rename, close, stat ======================="
for VALUE in `lctl get_param osc.*osc-[^mM]*.checksum_type`; do
PARAM=`echo ${VALUE[0]} | cut -d "=" -f1`
algo=`lctl get_param -n $PARAM | sed 's/.*\[\(.*\)\].*/\1/g'`
- [ "$algo" = "crc32" ] || error "algo set to $algo instead of crc32"
+ [ "$algo" = "adler" ] || error "algo set to $algo instead of adler"
done
remount_client $MOUNT
}
}
run_test 102k "setfattr without parameter of value shouldn't cause a crash"
+test_102l() {
+ # LU-532 trusted. xattr is invisible to non-root
+ local testfile=$DIR/$tfile
+
+ touch $testfile
+
+ echo "listxattr as user..."
+ chown $RUNAS_ID $testfile
+ $RUNAS getfattr -d -m '.*' $testfile 2>&1 |
+ grep -q "trusted" &&
+ error "$testfile trusted xattrs are user visible"
+
+ return 0;
+}
+run_test 102l "listxattr filter test =================================="
+
cleanup_test102
run_acl_subtest()
test_133a() {
remote_ost_nodsh && skip "remote OST with nodsh" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
+
+ do_facet $SINGLEMDS $LCTL list_param mdt.*.rename_stats ||
+ { skip "MDS doesn't support rename stats"; return; }
local testdir=$DIR/${tdir}/stats_testdir
mkdir -p $DIR/${tdir}
test_133d() {
remote_ost_nodsh && skip "remote OST with nodsh" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ do_facet $SINGLEMDS $LCTL list_param mdt.*.rename_stats ||
+ { skip "MDS doesn't support rename stats"; return; }
+
local testdir1=$DIR/${tdir}/stats_testdir1
local testdir2=$DIR/${tdir}/stats_testdir2
test_160() {
remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.0) ] ||
+ { skip "Need MDS version at least 2.2.0"; return; }
USER=$(do_facet $SINGLEMDS $LCTL --device $MDT0 changelog_register -n)
echo "Registered as changelog user $USER"
do_facet $SINGLEMDS $LCTL get_param -n mdd.$MDT0.changelog_users | \
}
run_test 204h "Print raw stripe count and size ============="
+# Figure out which job scheduler is being used, if any,
+# or use a fake one
+if [ -n "$SLURM_JOB_ID" ]; then # SLURM
+ JOBENV=SLURM_JOB_ID
+elif [ -n "$LSB_JOBID" ]; then # Load Sharing Facility
+ JOBENV=LSB_JOBID
+elif [ -n "$PBS_JOBID" ]; then # PBS/Maui/Moab
+ JOBENV=PBS_JOBID
+elif [ -n "$LOADL_STEPID" ]; then # LoadLeveller
+ JOBENV=LOADL_STEP_ID
+elif [ -n "$JOB_ID" ]; then # Sun Grid Engine
+ JOBENV=JOB_ID
+else
+ JOBENV=FAKE_JOBID
+fi
+
+verify_jobstats() {
+ local cmd=$1
+ local target=$2
+
+ # clear old jobstats
+ do_facet $SINGLEMDS lctl set_param mdt.*.job_stats="clear"
+ do_facet ost0 lctl set_param obdfilter.*.job_stats="clear"
+
+ # use a new JobID for this test, or we might see an old one
+ [ "$JOBENV" = "FAKE_JOBID" ] && FAKE_JOBID=test_id.$testnum.$RANDOM
+
+ JOBVAL=${!JOBENV}
+ log "Test: $cmd"
+ log "Using JobID environment variable $JOBENV=$JOBVAL"
+
+ if [ $JOBENV = "FAKE_JOBID" ]; then
+ FAKE_JOBID=$JOBVAL $cmd
+ else
+ $cmd
+ fi
+
+ if [ "$target" = "mdt" -o "$target" = "both" ]; then
+ FACET="$SINGLEMDS" # will need to get MDS number for DNE
+ do_facet $FACET lctl get_param mdt.*.job_stats |
+ grep $JOBVAL || error "No job stats found on MDT $FACET"
+ fi
+ if [ "$target" = "ost" -o "$target" = "both" ]; then
+ FACET=ost0
+ do_facet $FACET lctl get_param obdfilter.*.job_stats |
+ grep $JOBVAL || error "No job stats found on OST $FACET"
+ fi
+}
+
+test_205() { # Job stats
+ local cmd
+ OLD_JOBENV=`$LCTL get_param -n jobid_var`
+ if [ $OLD_JOBENV != $JOBENV ]; then
+ do_facet mgs $LCTL conf_param $FSNAME.sys.jobid_var=$JOBENV
+ wait_update $HOSTNAME "$LCTL get_param -n jobid_var" \
+ $JOBENV || return 1
+ fi
+
+ # mkdir
+ cmd="mkdir $DIR/$tfile"
+ verify_jobstats "$cmd" "mdt"
+ # rmdir
+ cmd="rm -fr $DIR/$tfile"
+ verify_jobstats "$cmd" "mdt"
+ # mknod
+ cmd="mknod $DIR/$tfile c 1 3"
+ verify_jobstats "$cmd" "mdt"
+ # unlink
+ cmd="rm -f $DIR/$tfile"
+ verify_jobstats "$cmd" "mdt"
+ # open & close
+ cmd="$SETSTRIPE -i 0 -c 1 $DIR/$tfile"
+ verify_jobstats "$cmd" "mdt"
+ # setattr
+ cmd="touch $DIR/$tfile"
+ verify_jobstats "$cmd" "both"
+ # write
+ cmd="dd if=/dev/zero of=$DIR/$tfile bs=1M count=1 oflag=sync"
+ verify_jobstats "$cmd" "ost"
+ # read
+ cmd="dd if=$DIR/$tfile of=/dev/null bs=1M count=1 iflag=direct"
+ verify_jobstats "$cmd" "ost"
+ # truncate
+ cmd="$TRUNCATE $DIR/$tfile 0"
+ verify_jobstats "$cmd" "both"
+ # rename
+ cmd="mv -f $DIR/$tfile $DIR/jobstats_test_rename"
+ verify_jobstats "$cmd" "mdt"
+
+ # cleanup
+ rm -f $DIR/jobstats_test_rename
+
+ if [ $OLD_JOBENV != $JOBENV ]; then
+ do_facet mgs $LCTL conf_param $FSNAME.sys.jobid_var=$OLD_JOBENV
+ wait_update $HOSTNAME "$LCTL get_param -n jobid_var" \
+ $OLD_JOBENV || return 1
+ fi
+}
+run_test 205 "Verify job stats"
+
test_212() {
size=`date +%s`
size=$((size % 8192 + 1))
}
test_215() { # for bugs 18102, 21079, 21517
- local N='(0|[1-9][0-9]*)' # non-negative numeric
- local P='[1-9][0-9]*' # positive numeric
- local I='(0|-?[1-9][0-9]*)' # any numeric (0 | >0 | <0)
- local NET='[a-z][a-z0-9]*' # LNET net like o2ib2
- local ADDR='[0-9.]+' # LNET addr like 10.0.0.1
- local NID="$ADDR@$NET" # LNET nid like 10.0.0.1@o2ib2
+ local N='(0|[1-9][0-9]*)' # non-negative numeric
+ local P='[1-9][0-9]*' # positive numeric
+ local I='(0|-?[1-9][0-9]*|NA)' # any numeric (0 | >0 | <0) or NA if no value
+ local NET='[a-z][a-z0-9]*' # LNET net like o2ib2
+ local ADDR='[0-9.]+' # LNET addr like 10.0.0.1
+ local NID="$ADDR@$NET" # LNET nid like 10.0.0.1@o2ib2
local L1 # regexp for 1st line
local L2 # regexp for 2nd line (optional)
if [ -z ${MDSSURVEY} ]; then
skip_env "mds-survey not found" && return
fi
+ [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.51) ] ||
+ { skip "Need MDS version at least 2.2.51"; return; }
local mds=$(facet_host $SINGLEMDS)
local target=$(do_nodes $mds 'lctl dl' | \
if [ -z ${MDSSURVEY} ]; then
skip_env "mds-survey not found" && return
fi
+ [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.51) ] ||
+ { skip "Need MDS version at least 2.2.51"; return; }
if [ $($LCTL dl | grep -c osc) -eq 0 ]; then
skip_env "Need to mount OST to test" && return
}
run_test 225b "Metadata survey sanity with stripe_count = 1"
+mcreate_path2fid () {
+ local mode=$1
+ local major=$2
+ local minor=$3
+ local name=$4
+ local desc=$5
+ local path=$DIR/$tdir/$name
+ local fid
+ local rc
+ local fid_path
+
+ $MCREATE --mode=$1 --major=$2 --minor=$3 $path || \
+ error "error: cannot create $desc"
+
+ fid=$($LFS path2fid $path)
+ rc=$?
+ [ $rc -ne 0 ] && error "error: cannot get fid of a $desc"
+
+ fid_path=$($LFS fid2path $DIR $fid)
+ rc=$?
+ [ $rc -ne 0 ] && error "error: cannot get path of a $desc by fid"
+
+ [ "$path" == "$fid_path" ] || \
+ error "error: fid2path returned \`$fid_path', expected \`$path'"
+}
+
+test_226 () {
+ rm -rf $DIR/$tdir
+ mkdir -p $DIR/$tdir
+
+ mcreate_path2fid 0010666 0 0 fifo "FIFO"
+ mcreate_path2fid 0020666 1 3 null "character special file (null)"
+ mcreate_path2fid 0020666 1 255 none "character special file (no device)"
+ mcreate_path2fid 0040666 0 0 dir "directory"
+ mcreate_path2fid 0060666 7 0 loop0 "block special file (loop)"
+ mcreate_path2fid 0100666 0 0 file "regular file"
+ mcreate_path2fid 0120666 0 0 link "symbolic link"
+ mcreate_path2fid 0140666 0 0 sock "socket"
+}
+run_test 226 "call path2fid and fid2path on files of all type"
+
+# LU-1299 Executing or running ldd on a truncated executable does not
+# cause an out-of-memory condition.
+test_227() {
+ dd if=`which date` of=$MOUNT/date bs=1k count=1
+ chmod +x $MOUNT/date
+
+ $MOUNT/date > /dev/null
+ ldd $MOUNT/date > /dev/null
+ rm -f $MOUNT/date
+}
+run_test 227 "running truncated executable does not cause OOM"
+
#
# tests that do cleanup/setup should be run at the end
#