ALWAYS_EXCEPT+=" 411"
fi
-# 5 12 8 12 (min)"
-[ "$SLOW" = "no" ] && EXCEPT_SLOW="27m 60i 64b 68 71 115 135 136 300o"
+# 5 12 8 12 15 (min)"
+[ "$SLOW" = "no" ] && EXCEPT_SLOW="27m 60i 64b 68 71 115 135 136 230d 300o"
if [ "$mds1_FSTYPE" = "zfs" ]; then
# bug number for skipped test:
test_51d() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[[ $OSTCOUNT -lt 3 ]] && skip_env "needs >= 3 OSTs"
+ local qos_old
test_mkdir $DIR/$tdir
+ $LFS setstripe -c $OSTCOUNT $DIR/$tdir
+
+ qos_old=$(do_facet mds1 \
+ "$LCTL get_param -n lod.$FSNAME-*.qos_threshold_rr" | head -n 1)
+ do_nodes $(comma_list $(mdts_nodes)) \
+ "$LCTL set_param lod.$FSNAME-*.qos_threshold_rr=100"
+ stack_trap "do_nodes $(comma_list $(mdts_nodes)) \
+ '$LCTL set_param lod.$FSNAME-*.qos_threshold_rr=${qos_old%%%}'"
+
createmany -o $DIR/$tdir/t- 1000
$LFS getstripe $DIR/$tdir > $TMP/$tfile
- for N in $(seq 0 $((OSTCOUNT - 1))); do
- OBJS[$N]=$(awk -vobjs=0 '($1 == '$N') { objs += 1 } \
- END { printf("%0.0f", objs) }' $TMP/$tfile)
- OBJS0[$N]=$(grep -A 1 idx $TMP/$tfile | awk -vobjs=0 \
- '($1 == '$N') { objs += 1 } \
- END { printf("%0.0f", objs) }')
- log "OST$N has ${OBJS[$N]} objects, ${OBJS0[$N]} are index 0"
+ for ((n = 0; n < $OSTCOUNT; n++)); do
+ objs[$n]=$(awk -vobjs=0 '($1 == '$n') { objs += 1 } \
+ END { printf("%0.0f", objs) }' $TMP/$tfile)
+ objs0[$n]=$(grep -A 1 idx $TMP/$tfile | awk -vobjs=0 \
+ '($1 == '$n') { objs += 1 } \
+ END { printf("%0.0f", objs) }')
+ log "OST$n has ${objs[$n]} objects, ${objs0[$n]} are index 0"
done
unlinkmany $DIR/$tdir/t- 1000
- NLAST=0
- for N in $(seq 1 $((OSTCOUNT - 1))); do
- [[ ${OBJS[$N]} -lt $((${OBJS[$NLAST]} - 20)) ]] &&
- error "OST $N has less objects vs OST $NLAST" \
- " (${OBJS[$N]} < ${OBJS[$NLAST]}"
- [[ ${OBJS[$N]} -gt $((${OBJS[$NLAST]} + 20)) ]] &&
- error "OST $N has less objects vs OST $NLAST" \
- " (${OBJS[$N]} < ${OBJS[$NLAST]}"
-
- [[ ${OBJS0[$N]} -lt $((${OBJS0[$NLAST]} - 20)) ]] &&
- error "OST $N has less #0 objects vs OST $NLAST" \
- " (${OBJS0[$N]} < ${OBJS0[$NLAST]}"
- [[ ${OBJS0[$N]} -gt $((${OBJS0[$NLAST]} + 20)) ]] &&
- error "OST $N has less #0 objects vs OST $NLAST" \
- " (${OBJS0[$N]} < ${OBJS0[$NLAST]}"
- NLAST=$N
+ nlast=0
+ for ((n = 0; n < $OSTCOUNT; n++)); do
+ (( ${objs[$n]} > ${objs[$nlast]} * 4 / 5 )) ||
+ { $LFS df && $LFS df -i &&
+ error "OST $n has fewer objects vs. OST $nlast" \
+ " (${objs[$n]} < ${objs[$nlast]}"; }
+ (( ${objs[$n]} < ${objs[$nlast]} * 5 / 4 )) ||
+ { $LFS df && $LFS df -i &&
+ error "OST $n has fewer objects vs. OST $nlast" \
+ " (${objs[$n]} < ${objs[$nlast]}"; }
+
+ (( ${objs0[$n]} > ${objs0[$nlast]} * 4 / 5 )) ||
+ { $LFS df && $LFS df -i &&
+ error "OST $n has fewer #0 objects vs. OST $nlast" \
+ " (${objs0[$n]} < ${objs0[$nlast]}"; }
+ (( ${objs0[$n]} < ${objs0[$nlast]} * 5 / 4 )) ||
+ { $LFS df && $LFS df -i &&
+ error "OST $n has fewer #0 objects vs. OST $nlast" \
+ " (${objs0[$n]} < ${objs0[$nlast]}"; }
+ nlast=$n
done
- rm -f $TMP/$tfile
}
run_test 51d "check object distribution"
}
run_test 56d "'lfs df -v' prints only configured devices"
+test_56e() {
+ err_enoent=2 # No such file or directory
+ err_eopnotsupp=95 # Operation not supported
+
+ enoent_mnt=/pmt1 # Invalid dentry. Path not present
+ notsup_mnt=/tmp # Valid dentry, but Not a lustreFS
+
+ # Check for handling of path not exists
+ output=$($LFS df $enoent_mnt 2>&1)
+ ret=$?
+
+ fs=$(echo $output | awk -F: '{print $2}' | awk '{print $3}' | tr -d \')
+ [[ $fs = $enoent_mnt && $ret -eq $err_enoent ]] ||
+ error "expect failure $err_enoent, not $ret"
+
+ # Check for handling of non-Lustre FS
+ output=$($LFS df $notsup_mnt)
+ ret=$?
+
+ fs=$(echo $output | awk '{print $1}' | awk -F: '{print $2}')
+ [[ $fs = $notsup_mnt && $ret -eq $err_eopnotsupp ]] ||
+ error "expect success $err_eopnotsupp, not $ret"
+
+ # Check for multiple LustreFS argument
+ output=$($LFS df $MOUNT $MOUNT $MOUNT | grep -c "filesystem_summary:")
+ ret=$?
+
+ [[ $output -eq 3 && $ret -eq 0 ]] ||
+ error "expect success 3, not $output, rc = $ret"
+
+ # Check for correct non-Lustre FS handling among multiple
+ # LustreFS argument
+ output=$($LFS df $MOUNT $notsup_mnt $MOUNT |
+ grep -c "filesystem_summary:"; exit ${PIPESTATUS[0]})
+ ret=$?
+
+ [[ $output -eq 2 && $ret -eq $err_eopnotsupp ]] ||
+ error "expect success 2, not $output, rc = $ret"
+}
+run_test 56e "'lfs df' Handle non LustreFS & multiple LustreFS"
+
NUMFILES=3
NUMDIRS=3
setup_56() {
}
run_test 77n "Verify read from a hole inside contiguous blocks with T10PI"
+test_77o() {
+ (( $CLIENT_VERSION >= $(version_code 2.14.54) )) ||
+ skip "Need at least version 2.14.54"
+ local ofd=obdfilter
+ local mdt=mdt
+
+ # print OST checksum_type
+ echo "$ofd.$FSNAME-*.checksum_type:"
+ do_nodes $(comma_list $(osts_nodes)) \
+ $LCTL get_param -n $ofd.$FSNAME-*.checksum_type
+
+ # print MDT checksum_type
+ echo "$mdt.$FSNAME-*.checksum_type:"
+ do_nodes $(comma_list $(mdts_nodes)) \
+ $LCTL get_param -n $mdt.$FSNAME-*.checksum_type
+
+ local o_count=$(do_nodes $(comma_list $(osts_nodes)) \
+ $LCTL get_param -n $ofd.$FSNAME-*.checksum_type | wc -l)
+
+ (( $o_count == $OSTCOUNT )) ||
+ error "found $o_count checksums, not \$MDSCOUNT=$OSTCOUNT"
+
+ local m_count=$(do_nodes $(comma_list $(mdts_nodes)) \
+ $LCTL get_param -n $mdt.$FSNAME-*.checksum_type | wc -l)
+
+ (( $m_count == $MDSCOUNT )) ||
+ error "found $m_count checksums, not \$MDSCOUNT=$MDSCOUNT"
+}
+run_test 77o "Verify checksum_type for server (mdt and ofd(obdfilter))"
+
cleanup_test_78() {
trap 0
rm -f $DIR/$tfile
test_224a() { # LU-1039, MRP-303
[ $PARALLEL == "yes" ] && skip "skip parallel run"
-
#define OBD_FAIL_PTLRPC_CLIENT_BULK_CB 0x508
$LCTL set_param fail_loc=0x508
- dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1 conv=fsync
+ dd if=/dev/zero of=$DIR/$tfile bs=1M count=1 conv=fsync
$LCTL set_param fail_loc=0
df $DIR
}
run_test 224a "Don't panic on bulk IO failure"
-test_224b() { # LU-1039, MRP-303
+test_224bd_sub() { # LU-1039, MRP-303
[ $PARALLEL == "yes" ] && skip "skip parallel run"
+ local timeout=$1
- dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1
+ shift
+ dd if=/dev/urandom of=$TMP/$tfile bs=1M count=1
+
+ $LFS setstripe -c 1 -i 0 $DIR/$tfile
+
+ dd if=$TMP/$tfile of=$DIR/$tfile bs=1M count=1
cancel_lru_locks osc
+ set_checksums 0
+ stack_trap "set_checksums $ORIG_CSUM" EXIT
+ local at_max_saved=0
+
+ # adaptive timeouts may prevent seeing the issue
+ if at_is_enabled; then
+ at_max_saved=$(at_max_get mds)
+ at_max_set 0 mds client
+ stack_trap "at_max_set $at_max_saved mds client" EXIT
+ fi
+
#define OBD_FAIL_PTLRPC_CLIENT_BULK_CB2 0x515
- $LCTL set_param fail_loc=0x515
- dd of=/dev/null if=$DIR/$tfile bs=4096 count=1
- $LCTL set_param fail_loc=0
+ do_facet ost1 $LCTL set_param fail_val=$timeout fail_loc=0x80000515
+ dd of=$TMP/$tfile.new if=$DIR/$tfile bs=1M count=1 || "$@"
+
+ do_facet ost1 $LCTL set_param fail_loc=0
+ cmp $TMP/$tfile $TMP/$tfile.new || error "file contents wrong"
df $DIR
}
+
+test_224b() {
+ test_224bd_sub 3 error "dd failed"
+}
run_test 224b "Don't panic on bulk IO failure"
test_224c() { # LU-6441
}
run_test 224c "Don't hang if one of md lost during large bulk RPC"
+test_224d() { # LU-11169
+ test_224bd_sub $((TIMEOUT + 2)) error "dd failed"
+}
+run_test 224d "Don't corrupt data on bulk IO timeout"
+
MDSSURVEY=${MDSSURVEY:-$(which mds-survey 2>/dev/null || true)}
test_225a () {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
git://git.whamcloud.com / fs / lustre-release.git / blobdiff