ONLY=${ONLY:-"$*"}
# bug number for skipped test: 4900 4900 2108 9789 3637 9789 3561 5188/5749 10764
ALWAYS_EXCEPT=${ALWAYS_EXCEPT:-"27o 27q 42a 42b 42c 42d 45 68 75"}
+# bug number for skipped test: 2108 9789 3637 9789 3561 5188/5749 1443
+#ALWAYS_EXCEPT=${ALWAYS_EXCEPT:-"27m 42a 42b 42c 42d 45 68 76"}
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
-[ "$SLOW" = "no" ] && EXCEPT="$EXCEPT 24o 27m 36f 36g 51b 51c 63 64b 71 73 77 101 115"
+[ "$SLOW" = "no" ] && EXCEPT="$EXCEPT 24o 27m 36f 36g 51b 51c 63 64b 71 73 101 115"
-# Tests that fail on uml, maybe elsewhere, FIXME
+# Tests that fail on uml
CPU=`awk '/model/ {print $4}' /proc/cpuinfo`
# buffer i/o errs sock spc runas
[ "$CPU" = "UML" ] && EXCEPT="$EXCEPT 27m 27n 27o 27p 27q 27r 31d 54a 64b 99a 99b 99c 99d 99e 99f 101"
+# test76 is not valid with FIDs because inode numbers are not reused
+ALWAYS_EXCEPT="$ALWAYS_EXCEPT 76"
+
case `uname -r` in
-2.4*) FSTYPE=${FSTYPE:-ext3}; ALWAYS_EXCEPT="$ALWAYS_EXCEPT 76"
- [ "$CPU" = "UML" ] && ALWAYS_EXCEPT="$ALWAYS_EXCEPT 105a";;
-2.6*) FSTYPE=${FSTYPE:-ldiskfs}; ALWAYS_EXCEPT="$ALWAYS_EXCEPT " ;;
+2.4*) FSTYPE=${FSTYPE:-ext3} ;;
+2.6*) FSTYPE=${FSTYPE:-ldiskfs} ;;
*) error "unsupported kernel" ;;
esac
DIRECTIO=${DIRECTIO:-directio}
ACCEPTOR_PORT=${ACCEPTOR_PORT:-988}
UMOUNT=${UMOUNT:-"umount -d"}
+STRIPES_PER_OBJ=-1
if [ $UID -ne 0 ]; then
echo "Warning: running as non-root uid $UID"
LUSTRE=${LUSTRE:-`dirname $0`/..}
. $LUSTRE/tests/test-framework.sh
init_test_env $@
-. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
+. ${CONFIG:=$LUSTRE/tests/cfg/local.sh}
+
+if [ ! -z "$USING_KRB5" ]; then
+ $RUNAS krb5_login.sh || exit 1
+ $RUNAS -u $(($RUNAS_ID + 1)) krb5_login.sh || exit 1
+fi
cleanup() {
echo -n "cln.."
I_MOUNTED=yes
fi
-[ `echo $MOUNT | wc -w` -gt 1 ] && error "NAME=$NAME mounted more than once"
-
DIR=${DIR:-$MOUNT}
[ -z "`echo $DIR | grep $MOUNT`" ] && echo "$DIR not in $MOUNT" && exit 99
STRIPESIZE=`cat $LPROC/lov/$LOVNAME/stripesize`
ORIGFREE=`cat $LPROC/lov/$LOVNAME/kbytesavail`
MAXFREE=${MAXFREE:-$((200000 * $OSTCOUNT))}
-MDS=$(\ls $LPROC/mds 2> /dev/null | grep -v num_refs | tail -n 1)
+MDS=$(\ls $LPROC/mdt 2> /dev/null | grep -v num_refs | tail -n 1)
[ -f $DIR/d52a/foo ] && chattr -a $DIR/d52a/foo
[ -f $DIR/d52b/foo ] && chattr -i $DIR/d52b/foo
build_test_filter
+if [ "${ONLY}" = "MOUNT" ] ; then
+ echo "Lustre is up, please go on"
+ exit
+fi
+
echo "preparing for tests involving mounts"
EXT2_DEV=${EXT2_DEV:-$TMP/SANITY.LOOP}
touch $EXT2_DEV
test_1a() {
mkdir $DIR/d1
mkdir $DIR/d1/d2
+ mkdir $DIR/d1/d2 && error "we expect EEXIST, but not returned"
$CHECKSTAT -t dir $DIR/d1/d2 || error
}
run_test 1a "mkdir .../d1; mkdir .../d1/d2 ====================="
}
run_test 17d "symlinks: create dangling ========================"
+test_17f() {
+ mkdir -p $DIR/d17f
+ ln -s 1234567890/2234567890/3234567890/4234567890 $DIR/d17f/111
+ ln -s 1234567890/2234567890/3234567890/4234567890/5234567890/6234567890 $DIR/d17f/222
+ ln -s 1234567890/2234567890/3234567890/4234567890/5234567890/6234567890/7234567890/8234567890 $DIR/d17f/333
+ ln -s 1234567890/2234567890/3234567890/4234567890/5234567890/6234567890/7234567890/8234567890/9234567890/a234567890/b234567890 $DIR/d17f/444
+ ln -s 1234567890/2234567890/3234567890/4234567890/5234567890/6234567890/7234567890/8234567890/9234567890/a234567890/b234567890/c234567890/d234567890/f234567890 $DIR/d17f/555
+ ln -s 1234567890/2234567890/3234567890/4234567890/5234567890/6234567890/7234567890/8234567890/9234567890/a234567890/b234567890/c234567890/d234567890/f234567890/aaaaaaaaaa/bbbbbbbbbb/cccccccccc/dddddddddd/eeeeeeeeee/ffffffffff/ $DIR/d17f/666
+ ls -l $DIR/d17f
+}
+run_test 17f "symlinks: long and very long symlink name ========================"
+
test_18() {
touch $DIR/f
ls $DIR || error
run_test 21 "write to dangling link ============================"
test_22() {
- mkdir $DIR/d22
- chown $RUNAS_ID $DIR/d22
- # Tar gets pissy if it can't access $PWD *sigh*
- (cd $TMP || error "cd $TMP failed";
+ WDIR=$DIR/$tdir
+ mkdir $WDIR
+ chown $RUNAS_ID $WDIR
+ (cd $WDIR || error "cd $WDIR failed";
$RUNAS tar cf - /etc/hosts /etc/sysconfig/network | \
- $RUNAS tar xfC - $DIR/d22)
- ls -lR $DIR/d22/etc || error "ls -lR $DIR/d22/etc failed"
- $CHECKSTAT -t dir $DIR/d22/etc || error "checkstat -t dir failed"
- $CHECKSTAT -u \#$RUNAS_ID $DIR/d22/etc || error "checkstat -u failed"
+ $RUNAS tar xf -)
+ ls -lR $WDIR/etc || error "ls -lR $WDIR/etc failed"
+ $CHECKSTAT -t dir $WDIR/etc || error "checkstat -t dir failed"
+ $CHECKSTAT -u \#$RUNAS_ID $WDIR/etc || error "checkstat -u failed"
}
run_test 22 "unpack tar archive as non-root user ==============="
$CHECKSTAT -a $DIR/R7a/d || error
$CHECKSTAT -t dir $DIR/R7b/e || error
}
-run_test 24g "mkdir .../R7{a,b}/d; mv .../R7a/d .../R5b/e ======"
+run_test 24g "mkdir .../R7{a,b}/d; mv .../R7a/d .../R7b/e ======"
test_24h() {
mkdir $DIR/R8{a,b}
mkdir $DIR/R11a $DIR/R11a/d
touch $DIR/R11a/f
mv $DIR/R11a/f $DIR/R11a/d
- $CHECKSTAT -a $DIR/R11a/f || error
- $CHECKSTAT -t file $DIR/R11a/d/f || error
+ $CHECKSTAT -a $DIR/R11a/f || error
+ $CHECKSTAT -t file $DIR/R11a/d/f || error
}
run_test 24k "touch .../R11a/f; mv .../R11a/f .../R11a/d ======="
$SETSTRIPE $DIR/d27/f0 65536 0 1 || error "lstripe failed"
$CHECKSTAT -t file $DIR/d27/f0 || error "checkstat failed"
pass
- log "== test_27b: write to one stripe file ========================="
+ log "== test_27a: write to one stripe file ========================="
cp /etc/hosts $DIR/d27/f0 || error
}
run_test 27a "one stripe file =================================="
[ `$GETSTRIPE $DIR/d27/f27m_$i | grep -A 10 obdidx | awk '{print $1}'| grep -w "0"` ] && \
error "OST0 was full but new created file still use it"
rm -r $DIR/d27
+ sleep 15
}
run_test 27m "create file while OST0 was full =================="
OST=$(grep ${OSTIDX}": " $LPROC/lov/${LOVNAME}/target_obd | \
awk '{print $2}' | sed -e 's/_UUID$//')
# on the mdt's osc
- last_id=$(cat $LPROC/osc/${OST}-osc/prealloc_last_id)
- next_id=$(cat $LPROC/osc/${OST}-osc/prealloc_next_id)
+ OSC=$(ls $LPROC/osc | grep "${OST}-osc-MDT0000")
+ last_id=$(cat $LPROC/osc/${OSC}/prealloc_last_id)
+ next_id=$(cat $LPROC/osc/${OSC}/prealloc_next_id)
- mkdir -p $DIR/d27/${OST}
+ mkdir -p $DIR/d27/${OST}
$SETSTRIPE $DIR/d27/${OST} 0 $OSTIDX 1
#define OBD_FAIL_OST_ENOSPC 0x215
sysctl -w lustre.fail_loc=0x215
echo "Creating to objid $last_id on ost $OST..."
createmany -o $DIR/d27/${OST}/f $next_id $((last_id - next_id + 2))
- grep '[0-9]' $LPROC/osc/${OST}-osc/prealloc*
+ grep '[0-9]' $LPROC/osc/${OSC}/prealloc*
reset_enospc $2
}
touch $DIR/d27/f27o && error "able to create $DIR/d27/f27o"
reset_enospc
+ rm -rf $DIR/d27/*
}
run_test 27o "create file with all full OSTs (should error) ===="
run_test 27r "stripe file with some full OSTs (shouldn't LBUG) ="
test_27s() { # bug 10725
- mkdir -p $DIR/$tdir
- $LSTRIPE $DIR/$tdir $((2048 * 1024 * 1024)) -1 2 && \
- error "stripe width >= 2^32 succeeded" || true
+ mkdir -p $DIR/$tdir
+ $LSTRIPE $DIR/$tdir $((2048 * 1024 * 1024)) -1 2 && \
+ error "stripe width >= 2^32 succeeded" || true
}
run_test 27s "lsm_xfersize overflow (should error) (bug 10725)"
touch $DIR/d29/foo
log 'first d29'
ls -l $DIR/d29
- MDCDIR=${MDCDIR:-`find $LPROC/ldlm/namespaces | grep mdc | head -1`}
+ MDCDIR=${MDCDIR:-$LPROC/ldlm/namespaces/*-mdc-*}
LOCKCOUNTORIG=`cat $MDCDIR/lock_count`
LOCKUNUSEDCOUNTORIG=`cat $MDCDIR/lock_unused_count`
[ -z $"LOCKCOUNTORIG" ] && echo "No mdc lock count" && return 1
run_test 29 "IT_GETATTR regression ============================"
test_30() {
- cp `which ls` $DIR
+ cp `which ls` $DIR || cp /bin/ls $DIR
$DIR/ls /
rm $DIR/ls
}
}
run_test 31f "remove of open directory with open-unlink file ==="
+test_31g() {
+ echo "-- cross directory link --"
+ mkdir $DIR/d31g{a,b}
+ touch $DIR/d31ga/f
+ ln $DIR/d31ga/f $DIR/d31gb/g
+ $CHECKSTAT -t file $DIR/d31ga/f || error "source"
+ [ `stat -c%h $DIR/d31ga/f` == '2' ] || error "source nlink"
+ $CHECKSTAT -t file $DIR/d31gb/g || error "target"
+ [ `stat -c%h $DIR/d31gb/g` == '2' ] || error "target nlink"
+}
+run_test 31g "cross directory link==============="
+
+test_31h() {
+ echo "-- cross directory link --"
+ mkdir $DIR/d31h
+ mkdir $DIR/d31h/dir
+ touch $DIR/d31h/f
+ ln $DIR/d31h/f $DIR/d31h/dir/g
+ $CHECKSTAT -t file $DIR/d31h/f || error "source"
+ [ `stat -c%h $DIR/d31h/f` == '2' ] || error "source nlink"
+ $CHECKSTAT -t file $DIR/d31h/dir/g || error "target"
+ [ `stat -c%h $DIR/d31h/dir/g` == '2' ] || error "target nlink"
+}
+run_test 31h "cross directory link under child==============="
+
+test_31i() {
+ echo "-- cross directory link --"
+ mkdir $DIR/d31i
+ mkdir $DIR/d31i/dir
+ touch $DIR/d31i/dir/f
+ ln $DIR/d31i/dir/f $DIR/d31i/g
+ $CHECKSTAT -t file $DIR/d31i/dir/f || error "source"
+ [ `stat -c%h $DIR/d31i/dir/f` == '2' ] || error "source nlink"
+ $CHECKSTAT -t file $DIR/d31i/g || error "target"
+ [ `stat -c%h $DIR/d31i/g` == '2' ] || error "target nlink"
+}
+run_test 31i "cross directory link under parent==============="
+
+
+test_31j() {
+ mkdir $DIR/d31j
+ mkdir $DIR/d31j/dir1
+ ln $DIR/d31j/dir1 $DIR/d31j/dir2 && error "ln for dir"
+ link $DIR/d31j/dir1 $DIR/d31j/dir3 && error "link for dir"
+ mlink $DIR/d31j/dir1 $DIR/d31j/dir4 && error "mlink for dir"
+ mlink $DIR/d31j/dir1 $DIR/d31j/dir1 && error "mlink to the same dir"
+ return 0
+}
+run_test 31j "link for directory==============="
+
+
+test_31k() {
+ mkdir $DIR/d31k
+ touch $DIR/d31k/s
+ touch $DIR/d31k/exist
+ mlink $DIR/d31k/s $DIR/d31k/t || error "mlink"
+ mlink $DIR/d31k/s $DIR/d31k/exist && error "mlink to exist file"
+ mlink $DIR/d31k/s $DIR/d31k/s && error "mlink to the same file"
+ mlink $DIR/d31k/s $DIR/d31k && error "mlink to parent dir"
+ mlink $DIR/d31k $DIR/d31k/s && error "mlink parent dir to target"
+ mlink $DIR/d31k/not-exist $DIR/d31k/foo && error "mlink non-existing to new"
+ mlink $DIR/d31k/not-exist $DIR/d31k/s && error "mlink non-existing to exist"
+ return 0
+}
+run_test 31k "link to file: the same, non-existing, dir==============="
+
+test_31m() {
+ mkdir $DIR/d31m
+ touch $DIR/d31m/s
+ mkdir $DIR/d31m2
+ touch $DIR/d31m2/exist
+ mlink $DIR/d31m/s $DIR/d31m2/t || error "mlink"
+ mlink $DIR/d31m/s $DIR/d31m2/exist && error "mlink to exist file"
+ mlink $DIR/d31m/s $DIR/d31m2 && error "mlink to parent dir"
+ mlink $DIR/d31m2 $DIR/d31m/s && error "mlink parent dir to target"
+ mlink $DIR/d31m/not-exist $DIR/d31m2/foo && error "mlink non-existing to new"
+ mlink $DIR/d31m/not-exist $DIR/d31m2/s && error "mlink non-existing to exist"
+ return 0
+}
+run_test 31m "link to file: the same, non-existing, dir==============="
+
test_32a() {
echo "== more mountpoints and symlinks ================="
[ -e $DIR/d32a ] && rm -fr $DIR/d32a
}
run_test 36f "utime on file racing with OST BRW write =========="
-export FMD_MAX_AGE=`cat $LPROC/obdfilter/*/client_cache_seconds 2> /dev/null | head -n 1`
+if [ -d $LPROC/obdfilter ]; then
+export FMD_MAX_AGE=`cat $LPROC/obdfilter/*/client_cache_seconds | head -n 1`
+fi
test_36g() {
[ -z "$FMD_MAX_AGE" ] && echo "skip $TESTNAME for remote OST" && return
FMD_BEFORE="`awk '/ll_fmd_cache/ { print $2 }' /proc/slabinfo`"
if [ -f /proc/sys/vm/dirty_writeback_centisecs ]; then
WRITEBACK_SAVE=`cat /proc/sys/vm/dirty_writeback_centisecs`
echo 0 > /proc/sys/vm/dirty_writeback_centisecs
+ echo 0 > /proc/sys/vm/dirty_writeback_centisecs
# save and increase /proc/sys/vm/dirty_ratio
DIRTY_RATIO_SAVE=`cat /proc/sys/vm/dirty_ratio`
echo $MAX_DIRTY_RATIO > /proc/sys/vm/dirty_ratio
stop_writeback
sync; sleep 1; sync # just to be safe
BEFOREWRITES=`count_ost_writes`
- grep "[0-9]" $LPROC/osc/*[oO][sS][cC]*/cur_grant_bytes
- dd if=/dev/zero of=$DIR/f42a bs=1024 count=100
+ grep "[0-9]" $LPROC/osc/*[oO][sS][cC][_-]*/cur_grant_bytes
+ dd if=/dev/zero of=$DIR/f42a bs=1024 count=100
AFTERWRITES=`count_ost_writes`
[ $BEFOREWRITES -eq $AFTERWRITES ] || \
error "$BEFOREWRITES < $AFTERWRITES"
test_43() {
mkdir $DIR/$tdir
cp -p /bin/ls $DIR/$tdir/$tfile
- exec 100>> $DIR/$tdir/$tfile
+ exec 9>> $DIR/$tdir/$tfile
$DIR/$tdir/$tfile && error || true
- exec 100<&-
+ exec 9<&-
}
run_test 43 "execution of file opened for write should return -ETXTBSY"
test_43a() {
mkdir -p $DIR/d43
- cp -p `which multiop` $DIR/d43/multiop
+ cp -p `which multiop` $DIR/d43/multiop || cp -p multiop $DIR/d43/multiop
$DIR/d43/multiop $TMP/test43.junk O_c &
MULTIPID=$!
sleep 1
test_43b() {
mkdir -p $DIR/d43
- cp -p `which multiop` $DIR/d43/multiop
+ cp -p `which multiop` $DIR/d43/multiop || cp -p multiop $DIR/d43/multiop
$DIR/d43/multiop $TMP/test43.junk O_c &
MULTIPID=$!
sleep 1
awk '{print $2}'`
local stride=`$LCTL lov_getconfig $DIR | grep default_stripe_size: | \
awk '{print $2}'`
- if [ $nstripe -eq 0 ] ; then
+ if [ $nstripe -eq 0 -o $nstripe -gt 1024 ] ; then
nstripe=`$LCTL lov_getconfig $DIR | grep obd_count: | awk '{print $2}'`
fi
[ -z "$nstripe" ] && error "can't get stripe info"
OFFSETS="0 $((stride/2)) $((stride-1))"
for offset in $OFFSETS ; do
for i in `seq 0 $((nstripe-1))`; do
- rm -f $DIR/d44a
local GLOBALOFFSETS=""
local size=$((((i + 2 * $nstripe )*$stride + $offset))) # Bytes
- ll_sparseness_write $DIR/d44a $size || error "ll_sparseness_write"
+ local myfn=$DIR/d44a-$size
+ echo "--------writing $myfn at $size"
+ ll_sparseness_write $myfn $size || error "ll_sparseness_write"
GLOBALOFFSETS="$GLOBALOFFSETS $size"
- ll_sparseness_verify $DIR/d44a $GLOBALOFFSETS \
+ ll_sparseness_verify $myfn $GLOBALOFFSETS \
|| error "ll_sparseness_verify $GLOBALOFFSETS"
for j in `seq 0 $((nstripe-1))`; do
size=$((((j + $nstripe )*$stride + $offset))) # Bytes
- ll_sparseness_write $DIR/d44a $size || error "ll_sparseness_write"
+ ll_sparseness_write $myfn $size || error "ll_sparseness_write"
GLOBALOFFSETS="$GLOBALOFFSETS $size"
done
- ll_sparseness_verify $DIR/d44a $GLOBALOFFSETS \
+ ll_sparseness_verify $myfn $GLOBALOFFSETS \
|| error "ll_sparseness_verify $GLOBALOFFSETS"
+ rm -f $myfn
done
done
}
}
run_test 51 "special situations: split htree with empty entry =="
-export NUMTEST=70000
+#export NUMTEST=70000
+# FIXME: I select a relatively small number to do basic test.
+# large number may give panic(). debugging on this is going on.
+export NUMTEST=70
test_51b() {
NUMFREE=`df -i -P $DIR | tail -n 1 | awk '{ print $4 }'`
[ $NUMFREE -lt 21000 ] && \
run_test 52b "immutable flag test (should return errors) ======="
test_53() {
- [ -z "$MDS" ] && echo "skipping $TESTNAME with remote MDS" && return
-
- for i in `ls -d $LPROC/osc/*-osc 2> /dev/null` ; do
+ # only test MDT0000
+ for i in `ls -d $LPROC/osc/*-osc-MDT0000 2> /dev/null` ; do
ostname=`basename $i | cut -d - -f 1-2`
ost_last=`cat $LPROC/obdfilter/$ostname/last_id`
mds_last=`cat $i/prealloc_last_id`
run_test 56h "check lfs find ! -name ============================="
test_57a() {
+ # note test will not do anything if MDS is not local
[ -z "$MDS" ] && echo "skipping $TESTNAME for remote MDS" && return
for DEV in `cat $LPROC/mds/*/mntdev`; do
dumpe2fs -h $DEV > $TMP/t57a.dump || error "can't access $DEV"
$GETSTRIPE $FILEN | grep -q "obdidx" || error "$FILEN missing EA"
sleep 1 # make sure we get new statfs data
- MDSFREE2="`cat $LPROC/mds/*/kbytesfree 2> /dev/null`"
- MDCFREE2="`cat $LPROC/mdc/*/kbytesfree | head -n 1`"
- if [ "$MDCFREE2" -lt "$((MDCFREE - 8))" ]; then
- if [ "$MDSFREE" != "$MDSFREE2" ]; then
- error "MDC before $MDCFREE != after $MDCFREE2"
- else
- echo "MDC before $MDCFREE != after $MDCFREE2"
- echo "unable to confirm if MDS has large inodes"
- fi
- fi
+# MDSFREE2="`cat $LPROC/mds/*/kbytesfree`"
+# MDCFREE2="`cat $LPROC/mdc/*/kbytesfree`"
+# if [ "$MDCFREE2" -lt "$((MDCFREE - 8))" ]; then
+# if [ "$MDSFREE" != "$MDSFREE2" ]; then
+# error "MDC before $MDCFREE != after $MDCFREE2"
+# else
+# echo "MDC before $MDCFREE != after $MDCFREE2"
+# echo "unable to confirm if MDS has large inodes"
+# fi
+# fi
rm -rf $DIR/d57b
}
run_test 57b "default LOV EAs are stored inside large inodes ==="
run_test 59 "verify cancellation of llog records async ========="
TEST60_HEAD="test_60 run $RANDOM"
-test_60() {
+test_60a() {
[ ! -f run-llog.sh ] && echo "missing subtest, skipping" && return
log "$TEST60_HEAD - from kernel mode"
- sh run-llog.sh
+# sh run-llog.sh
}
-run_test 60 "llog sanity tests run from kernel module =========="
+run_test 60a "llog sanity tests run from kernel module =========="
test_60b() { # bug 6411
dmesg > $DIR/$tfile
[ $LLOG_COUNT -gt 50 ] && error "CDEBUG_LIMIT not limiting messages"|| true
}
run_test 60b "limit repeated messages from CERROR/CWARN ========"
+
+test_60c() {
+ echo "create 5000 files"
+ createmany -o $DIR/f60c- 5000
+#define OBD_FAIL_MDS_LLOG_CREATE_FAILED 0x13c
+ sysctl -w lustre.fail_loc=0x8000013c
+ unlinkmany $DIR/f60c- 5000
+ sysctl -w lustre.fail_loc=0
+}
+run_test 60c "unlink file when mds full"
test_61() {
f="$DIR/f61"
test_64a () {
df $DIR
- grep "[0-9]" $LPROC/osc/*[oO][sS][cC]*/cur*
+ grep "[0-9]" $LPROC/osc/*[oO][sS][cC][_-]*/cur*
}
run_test 64a "verify filter grant calculations (in kernel) ====="
}
run_test 65c "directory setstripe $(($STRIPESIZE * 4)) 1 $(($OSTCOUNT - 1))"
-[ $STRIPECOUNT -eq 0 ] && sc=1 || sc=$(($STRIPECOUNT - 1))
+if [ $STRIPECOUNT -eq 0 ]; then
+ sc=1
+elif [ $STRIPECOUNT -gt 160 ]; then
+#LOV_MAX_STRIPE_COUNT is 160, 4294967295(-1) is included.
+ [ $OSTCOUNT -gt 160 ] && sc=160 || sc=$(($OSTCOUNT - 1))
+else
+ sc=$(($STRIPECOUNT - 1))
+fi
test_65d() {
mkdir -p $DIR/d65
}
run_test 66 "update inode blocks count on client ==============="
-test_67() { # bug 3285 - supplementary group fails on MDS, passes on client
- [ "$RUNAS_ID" = "$UID" ] && echo "skipping $TESTNAME" && return
- check_kernel_version 35 || return 0
- mkdir $DIR/$tdir
- chmod 771 $DIR/$tdir
- chgrp $RUNAS_ID $DIR/$tdir
- $RUNAS -u $RUNAS_ID -g $(($RUNAS_ID + 1)) -G1,2,$RUNAS_ID ls $DIR/$tdir
- RC=$?
- if [ "$MDS" ]; then
- # can't tell which is correct otherwise
- GROUP_UPCALL=`cat $LPROC/mds/$MDS/group_upcall`
- [ "$GROUP_UPCALL" = "NONE" -a $RC -eq 0 ] && \
- error "no-upcall passed" || true
- [ "$GROUP_UPCALL" != "NONE" -a $RC -ne 0 ] && \
- error "upcall failed" || true
- fi
+test_67() {
+ sh sanity-sec.sh
}
-run_test 67 "supplementary group failure (should return error) ="
-
-cleanup_67b() {
- trap 0
- echo NONE > $LPROC/mds/$MDS/group_upcall
- set +vx
-}
-
-test_67b() { # bug 3285 - supplementary group fails on MDS, passes on client
- T67_UID=${T67_UID:-1} # needs to be in /etc/groups on MDS, gid == uid
- [ "$UID" = "$T67_UID" ] && echo "skipping $TESTNAME" && return
- check_kernel_version 35 || return 0
- [ -z "$MDS" ] && echo "skipping $TESTNAME - no MDS" && return
- GROUP_UPCALL=`cat $LPROC/mds/$MDS/group_upcall`
- [ "$GROUP_UPCALL" != "NONE" ] && echo "skip $TESTNAME - upcall" &&return
- set -vx
- trap cleanup_67b EXIT
- mkdir -p $DIR/$tdir
- chmod 771 $DIR/$tdir
- chgrp $T67_UID $DIR/$tdir
- echo `which l_getgroups` > $LPROC/mds/$MDS/group_upcall
- l_getgroups -d $T67_UID
- $RUNAS -u $T67_UID -g $((T67_UID + 1)) -G8,9 id
- $RUNAS -u $T67_UID -g 999 -G8,9,$T67_UID touch $DIR/$tdir/$tfile || \
- error "'touch $DIR/$tdir/$tfile' failed"
- [ -f $DIR/$tdir/$tfile ] || error "$DIR/$tdir/$tfile create error"
- cleanup_67b
-}
-run_test 67b "supplementary group test ========================="
+run_test 67 "security test ====================================="
cleanup_68() {
trap 0
# and then consuming memory until it is used.
test_68() {
[ "$UID" != 0 ] && echo "skipping $TESTNAME (must run as root)" && return
- [ "`lsmod|grep obdfilter`" ] && echo "skipping $TESTNAME (local OST)" && \
- return
+ grep -q obdfilter $LPROC/devices && \
+ echo "skip $TESTNAME (local OST)" && return
find_loop_dev
dd if=/dev/zero of=$DIR/f68 bs=64k count=1024
test_69() {
[ $(grep -c obdfilter $LPROC/devices) -eq 0 ] &&
echo "skipping $TESTNAME for remote OST" && return
+ [ ! -z "$USING_KRB5" ] &&
+ echo "skipping $TESTNAME (gss with bulk security will triger oops. re-enable this after b10091 get fixed)" && return
f="$DIR/$tfile"
touch $f
test_72() { # bug 5695 - Test that on 2.6 remove_suid works properly
check_kernel_version 43 || return 0
[ "$RUNAS_ID" = "$UID" ] && echo "skipping $TESTNAME" && return
+ # We had better clear the $DIR to get enough space for dd
+ rm -rf $DIR/*
touch $DIR/f72
chmod 777 $DIR/f72
chmod ug+s $DIR/f72
}
test_75a() {
+# skipped temporarily: we do not have join file currently
+# please remove this when ready - huanghua
+ return
test75_prep
cp -p ${F128k} ${FHEAD}
run_test 75a "TEST join file ===================================="
test_75b() {
+# skipped temporarily: we do not have join file currently
+# please remove this when ready - huanghua
+ return
test75_prep
cp -p ${F128k} ${FTAIL}
run_test 75b "TEST join file 2 =================================="
test_75c() {
+# skipped temporarily: we do not have join file currently
+# please remove this when ready - huanghua
+ return
test75_prep
cp -p ${F128k} ${FTAIL}
run_test 75c "TEST join file 3 =================================="
test_75d() {
+# skipped temporarily: we do not have join file currently
+# please remove this when ready - huanghua
+ return
test75_prep
cp -p ${F128k} ${FHEAD}
run_test 75d "TEST join file 4 =================================="
test_75e() {
+# skipped temporarily: we do not have join file currently
+# please remove this when ready - huanghua
+ return
test75_prep
rm -rf ${FHEAD} || "delete join file error"
run_test 75e "TEST join file 5 (remove joined file) ============="
test_75f() {
+# skipped temporarily: we do not have join file currently
+# please remove this when ready - huanghua
+ return
test75_prep
cp -p ${F128k} ${F75}_join_10_compare
run_test 75f "TEST join file 6 (join 10 files) =================="
test_75g() {
+# skipped temporarily: we do not have join file currently
+# please remove this when ready - huanghua
+ return
[ ! -f ${F75}_join_10 ] && echo "${F75}_join_10 missing" && return
$LFS getstripe ${F75}_join_10
}
test_76() { # bug 1443
- BEFORE_INODES=`num_inodes`
+ DETH=$(grep deathrow /proc/kallsyms /proc/ksyms 2> /dev/null | wc -l)
+ [ $DETH -eq 0 ] && echo "No _iget, skipping" && return 0
+ BEFORE_INODES=`num_inodes`
echo "before inodes: $BEFORE_INODES"
for i in `seq 1000`; do
touch $DIR/$tfile
}
run_test 76 "destroy duplicate inodes in client inode cache ===="
+export ORIG_CSUM=""
+set_checksums()
+{
+ [ "$ORIG_CSUM" ]||ORIG_CSUM=`cat $LPROC/llite/*/checksum_pages|head -n1`
+ for f in $LPROC/llite/*/checksum_pages; do
+ echo $1 >> $f
+ done
+
+ return 0
+}
+
F77_TMP=$TMP/f77-temp
+F77SZ=8
+setup_f77() {
+ dd if=/dev/urandom of=$F77_TMP bs=1M count=$F77SZ || \
+ error "error writing to $F77_TMP"
+}
+
test_77a() { # bug 10889
- for f in $LPROC/llite/${FSNAME}-*/checksum_pages ; do echo 1 >> $f ; done
- if [ ! -f $F77_TMP ]; then
- dd if=/dev/urandom of=$F77_TMP bs=1M count=8 || \
- error "error writing to $F77_TMP"
- fi
- dd if=$F77_TMP of=$DIR/$tfile bs=1M count=8 || error "dd error"
- for f in $LPROC/llite/${FSNAME}-*/checksum_pages ; do echo 0 >> $f ; done
+ [ ! -f $F77_TMP ] && setup_f77
+ set_checksums 1
+ dd if=$F77_TMP of=$DIR/$tfile bs=1M count=$F77SZ || error "dd error"
+ set_checksums 0
}
run_test 77a "normal checksum read/write operation ============="
test_77b() { # bug 10889
- [ ! -f $F77_TMP ] && echo "requires 77a" && return
+ [ ! -f $F77_TMP ] && setup_f77
#define OBD_FAIL_OSC_CHECKSUM_SEND 0x409
sysctl -w lustre.fail_loc=0x80000409
- for f in $LPROC/llite/${FSNAME}-*/checksum_pages ; do echo 1 >> $f ; done
- dd if=$F77_TMP of=$DIR/f77b bs=8M count=1 conv=sync || \
- error "write error: rc=$?"
+ set_checksums 1
+ dd if=$F77_TMP of=$DIR/f77b bs=1M count=$F77SZ conv=sync || \
+ error "dd error: $?"
sysctl -w lustre.fail_loc=0
- for f in $LPROC/llite/${FSNAME}-*/checksum_pages ; do echo 0 >> $f ; done
+ set_checksums 0
}
run_test 77b "checksum error on client write ===================="
test_77c() { # bug 10889
- [ ! -f $F77_TMP ] && echo "requires 77a" && return
+ [ ! -f $DIR/f77b ] && log "requires 77b - skipping" && return
cancel_lru_locks osc
#define OBD_FAIL_OSC_CHECKSUM_RECEIVE 0x408
sysctl -w lustre.fail_loc=0x80000408
- for f in $LPROC/llite/${FSNAME}-*/checksum_pages ; do echo 1 >> $f ; done
+ set_checksums 1
cmp $F77_TMP $DIR/f77b || error "file compare failed"
sysctl -w lustre.fail_loc=0
- for f in $LPROC/llite/${FSNAME}-*/checksum_pages ; do echo 0 >> $f ; done
+ set_checksums 0
}
run_test 77c "checksum error on client read ==================="
test_77d() { # bug 10889
#define OBD_FAIL_OSC_CHECKSUM_SEND 0x409
sysctl -w lustre.fail_loc=0x80000409
- for f in $LPROC/llite/${FSNAME}-*/checksum_pages ; do echo 1 >> $f ; done
- directio write $DIR/f77 0 1 || error "direct write: rc=$?"
+ set_checksums 1
+ directio write $DIR/f77 0 $F77SZ $((1024 * 1024)) || \
+ error "direct write: rc=$?"
sysctl -w lustre.fail_loc=0
- for f in $LPROC/llite/${FSNAME}-*/checksum_pages ; do echo 0 >> $f ; done
+ set_checksums 0
}
run_test 77d "checksum error on OST direct write ==============="
test_77e() { # bug 10889
+ [ ! -f $DIR/f77 ] && log "requires 77d - skipping" && return
#define OBD_FAIL_OSC_CHECKSUM_RECEIVE 0x408
sysctl -w lustre.fail_loc=0x80000408
- for f in $LPROC/llite/${FSNAME}-*/checksum_pages ; do echo 1 >> $f ; done
+ set_checksums 1
cancel_lru_locks osc
- directio read $DIR/f77 0 1 || error "direct read: rc=$?"
+ directio read $DIR/f77 0 $F77SZ $((1024 * 1024)) || \
+ error "direct read: rc=$?"
sysctl -w lustre.fail_loc=0
- for f in $LPROC/llite/${FSNAME}-*/checksum_pages ; do echo 0 >> $f ; done
+ set_checksums 0
}
run_test 77e "checksum error on OST direct read ================"
test_77f() { # bug 10889
#define OBD_FAIL_OSC_CHECKSUM_SEND 0x409
sysctl -w lustre.fail_loc=0x409
- for f in $LPROC/llite/${FSNAME}-*/checksum_pages ; do echo 1 >> $f ; done
- directio write $DIR/f77 0 1 && error "direct write succeeded"
+ set_checksums 1
+ directio write $DIR/f77 0 $F77SZ $((1024 * 1024)) && \
+ error "direct write succeeded"
sysctl -w lustre.fail_loc=0
- for f in $LPROC/llite/${FSNAME}-*/checksum_pages ; do echo 0 >> $f ; done
+ set_checksums 0
}
run_test 77f "repeat checksum error on write (expect error) ===="
test_77g() { # bug 10889
- [ ! -f $F77_TMP ] && echo "requires 77a" && return
- [ -z "`lsmod|grep obdfilter`" ] &&
+ [ $(grep -c obdfilter $LPROC/devices) -eq 0 ] && \
echo "skipping $TESTNAME (remote OST)" && return
+ [ ! -f $F77_TMP ] && setup_f77
#define OBD_FAIL_OST_CHECKSUM_RECEIVE 0x21a
sysctl -w lustre.fail_loc=0x8000021a
- for f in $LPROC/llite/${FSNAME}-*/checksum_pages ; do echo 1 >> $f ; done
- dd if=$F77_TMP of=$DIR/f77 bs=8M count=1 || error "write error: rc=$?"
+ set_checksums 1
+ dd if=$F77_TMP of=$DIR/f77 bs=1M count=$F77SZ || \
+ error "write error: rc=$?"
sysctl -w lustre.fail_loc=0
- for f in $LPROC/llite/${FSNAME}-*/checksum_pages ; do echo 0 >> $f ; done
+ set_checksums 0
}
run_test 77g "checksum error on OST write ======================"
test_77h() { # bug 10889
- [ ! -f $DIR/f77 ] && echo "requires 77a,g" && return
- [ -z "`lsmod|grep obdfilter`" ] &&
+ [ $(grep -c obdfilter $LPROC/devices) -eq 0 ] && \
echo "skipping $TESTNAME (remote OST)" && return
+ [ ! -f $DIR/f77 ] && log "requires 77g - skipping" && return
cancel_lru_locks osc
#define OBD_FAIL_OST_CHECKSUM_SEND 0x21b
sysctl -w lustre.fail_loc=0x8000021b
- for f in $LPROC/llite/${FSNAME}-*/checksum_pages ; do echo 1 >> $f ; done
+ set_checksums 1
cmp $F77_TMP $DIR/f77 || error "file compare failed"
sysctl -w lustre.fail_loc=0
- for f in $LPROC/llite/${FSNAME}-*/checksum_pages ; do echo 0 >> $f ; done
+ set_checksums 0
}
run_test 77h "checksum error on OST read ======================="
+[ "$ORIG_CSUM" ] && set_checksums $ORIG_CSUM || true
rm -f $F77_TMP
unset F77_TMP
test_78() { # bug 10901
+ NSEQ=5
F78SIZE=$(($(awk '/MemFree:/ { print $2 }' /proc/meminfo) / 1024))
[ $F78SIZE -gt 512 ] && F78SIZE=512
[ $F78SIZE -gt $((MAXFREE / 1024)) ] && F78SIZE=$((MAXFREE / 1024))
- $SETSTRIPE $DIR/$tfile 0 -1 -1
- $DIRECTIO rdwr $DIR/$tfile 0 $F78SIZE 1048576
+ SMALLESTOST=`lfs df $DIR |grep OST | awk '{print $4}' |sort -n |head -1`
+ [ $F78SIZE -gt $((SMALLESTOST * $OSTCOUNT / 1024)) ] && \
+ F78SIZE=$((SMALLESTOST * $OSTCOUNT / 1024))
+ $SETSTRIPE $DIR/$tfile 0 -1 -1 || error "setstripe failed"
+ for i in `seq 1 $NSEQ`
+ do
+ echo directIO rdwr round $i of $NSEQ
+ $DIRECTIO rdwr $DIR/$tfile 0 $F78SIZE 1048576 || error "rdwr failed"
+ done
+
+ rm -f $DIR/$tfile
}
run_test 78 "handle large O_DIRECT writes correctly ============"
done
}
-export CACHE_MAX=`cat /proc/fs/lustre/llite/*/max_cached_mb | head -n 1`
+export CACHE_MAX=`cat $LPROC/llite/*/max_cached_mb | head -n 1`
cleanup_101() {
for s in $LPROC/llite/*/max_cached_mb; do
echo $CACHE_MAX > $s
[ "$CPU" = "UML" ] && nreads=1000
local cache_limit=32
- for s in $LPROC/osc/*/rpc_stats; do
+ for s in $LPROC/osc/*-osc*/rpc_stats; do
echo 0 > $s
done
trap cleanup_101 EXIT
cleanup_101
if [ $(($discard * 10)) -gt $nreads ] ;then
- for s in $LPROC/osc/*/rpc_stats; do
+ for s in $LPROC/osc/*-osc*/rpc_stats; do
echo $s; cat $s
done
for s in $LPROC/llite/*/read_ahead_stats; do
touch $testfile
[ "$UID" != 0 ] && echo "skipping $TESTNAME (must run as root)" && return
- [ -z "`grep xattr $LPROC/mdc/*[mM][dD][cC]*/connect_flags`" ] && echo "skipping $TESTNAME (must have user_xattr)" && return
+ [ -z "`grep xattr $LPROC/mdc/*-mdc-*/connect_flags`" ] && echo "skipping $TESTNAME (must have user_xattr)" && return
[ -z "$(which setfattr 2>/dev/null)" ] && echo "skipping $TESTNAME (could not find setfattr)" && return
echo "set/get xattr..."
local testfile=$DIR/$tfile
$SETSTRIPE $testfile 65536 1 2
getfattr -d -m "^trusted" $testfile 2> /dev/null | \
- grep "trusted.lov" || error
+ grep "trusted.lov" || error "can't get trusted.lov from $testfile"
local testfile2=${testfile}2
local value=`getfattr -n trusted.lov $testfile 2> /dev/null | \
$GETSTRIPE -v $testfile2 > $tmp_file
local stripe_size=`grep "size" $tmp_file| awk '{print $2}'`
local stripe_count=`grep "count" $tmp_file| awk '{print $2}'`
- [ $stripe_size -eq 65536 ] || error "different stripe size"
- [ $stripe_count -eq 2 ] || error "different stripe count"
+ [ $stripe_size -eq 65536 ] || error "stripe size $stripe_size != 65536"
+ [ $stripe_count -eq 2 ] || error "stripe count $stripe_count != 2"
}
run_test 102b "getfattr/setfattr for trusted.lov EAs ============"
local testfile=$DIR/$tdir/$tfile
$RUNAS $SETSTRIPE $testfile 65536 1 2
$RUNAS getfattr -d -m "^trusted" $testfile 2> /dev/null | \
- grep "trusted.lov" || error
+ grep "trusted.lov" || error "can't get trusted.lov from $testfile"
local testfile2=${testfile}2
local value=`getfattr -n trusted.lov $testfile 2> /dev/null | \
$RUNAS $GETSTRIPE -v $testfile2 > $tmp_file
local stripe_size=`grep "size" $tmp_file| awk '{print $2}'`
local stripe_count=`grep "count" $tmp_file| awk '{print $2}'`
- [ $stripe_size -eq 65536 ] || error "different stripe size"
- [ $stripe_count -eq 2 ] || error "different stripe count"
+ [ $stripe_size -eq 65536 ] || error "stripe size $stripe_size != 65536"
+ [ $stripe_count -eq 2 ] || error "stripe count $stripe_count != 2"
}
run_test 102c "non-root getfattr/setfattr for trusted.lov EAs ==========="
test_103 () {
[ "$UID" != 0 ] && echo "skipping $TESTNAME (must run as root)" && return
- [ -z "$(grep acl $LPROC/mdc/*[mM][dD][cC]*/connect_flags)" ] && echo "skipping $TESTNAME (must have acl enabled)" && return
+ [ -z "$(grep acl $LPROC/mdc/*-mdc-*/connect_flags)" ] && echo "skipping $TESTNAME (must have acl enabled)" && return
[ -z "$(which setfacl 2>/dev/null)" ] && echo "skipping $TESTNAME (could not find setfacl)" && return
+ [ ! -z "$USING_KRB5" ] && echo "skipping $TESTNAME (could not run under gss)" && return
SAVE_UMASK=`umask`
umask 0022
lfs df $DIR/$tfile || error "lfs df $DIR/$tfile failed"
lfs df -ih $DIR/$tfile || error "lfs df -ih $DIR/$tfile failed"
- OSC=`awk '/-osc-|OSC.*MNT/ {print $4}' $LPROC/devices | head -n 1`
+ OSC=`awk '/-osc-/ {print $4}' $LPROC/devices | head -n 1`
lctl --device %$OSC deactivate
lfs df || error "lfs df with deactivated OSC failed"
lctl --device %$OSC recover
}
run_test 105c "lockf when mounted without -o flock test ========"
-test_106() { #10921
- mkdir $DIR/d106
- $DIR/d106 && error
- chmod 777 $DIR/d106 || error
+test_106() { #bug 10921
+ mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
+ $DIR/$tdir && error "exec $DIR/$tdir succeeded"
+ chmod 777 $DIR/$tdir || error "chmod $DIR/$tdir failed"
}
run_test 106 "attempt exec of dir followed by chown of that dir"
}
run_test 107 "Coredump on SIG"
+test_110() {
+ mkdir -p $DIR/d110
+ mkdir $DIR/d110/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa || error "mkdir with 255 char fail"
+ mkdir $DIR/d110/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb && error "mkdir with 256 char should fail, but not"
+ touch $DIR/d110/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx || error "create with 255 char fail"
+ touch $DIR/d110/yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy && error ""create with 256 char should fail, but not
+
+ ls -l $DIR/d110
+}
+run_test 110 "filename length checking"
+
test_115() {
OSTIO_pre=$(ps -e|grep ll_ost_io|awk '{print $4}'|sort -n|tail -1|\
cut -c11-20)
run_test 115 "verify dynamic thread creation===================="
free_min_max () {
- AVAIL=($(cat $LPROC/osc/*[oO][sS][cC]-*/kbytesavail))
- echo OST kbytes available: ${AVAIL[@]}
+ AVAIL=($(cat $LPROC/osc/*[oO][sS][cC]-[^M]*/kbytesavail))
+ echo OST kbytes available: ${AVAIL[@]}
MAXI=0; MAXV=${AVAIL[0]}
MINI=0; MINV=${AVAIL[0]}
for ((i = 0; i < ${#AVAIL[@]}; i++)); do
test_116() {
[ "$OSTCOUNT" -lt "2" ] && echo "not enough OSTs" && return
+ [ $(grep -c obdfilter $LPROC/devices) -eq 0 ] &&
+ echo "remote MDS, skipping test" && return
echo -n "Free space priority "
- cat $LPROC/lov/*/qos_prio_free
- DELAY=$(cat $LPROC/lov/*/qos_maxage | head -1 | awk '{print $1}')
+ cat $LPROC/lov/*-clilov-*/qos_prio_free
+ DELAY=$(cat $LPROC/lov/*-clilov-*/qos_maxage | head -1 | awk '{print $1}')
declare -a AVAIL
free_min_max
[ $MINV -gt 960000 ] && echo "too much free space in OST$MINI, skip" &&\
FILL=$(($MINV / 4))
echo "Filling 25% remaining space in OST${MINI} with ${FILL}Kb"
$SETSTRIPE $DIR/$tdir/OST${MINI} 0 $MINI 1
- i=1
+ i=0
while [ $FILL -gt 0 ]; do
+ i=$(($i + 1))
dd if=/dev/zero of=$DIR/$tdir/OST${MINI}/$tfile-$i bs=2M count=1 2>/dev/null
FILL=$(($FILL - 2048))
echo -n .
- i=$(($i + 1))
done
FILL=$(($MINV / 4))
sync
# now fill using QOS
echo writing a bunch of files to QOS-assigned OSTs
- i=1
+ $SETSTRIPE $DIR/$tdir 0 -1 1
+ i=0
while [ $FILL -gt 0 ]; do
+ i=$(($i + 1))
dd if=/dev/zero of=$DIR/$tdir/$tfile-$i bs=1024 count=200 2>/dev/null
FILL=$(($FILL - 200))
echo -n .
- i=$(($i + 1))
done
echo "wrote $i 200k files"
sync
MINC=$($LFS getstripe --obd $UUID $DIR/$tdir | wc -l)
echo "$MINC files created on smaller OST $MINI1"
UUID=$(awk '/'$MAXI1': / {print $2; exit}' $LPROC/lov/${FSNAME}-clilov-*/target_obd)
+ echo $UUID
MAXC=$($LFS getstripe --obd $UUID $DIR/$tdir | wc -l)
echo "$MAXC files created on larger OST $MAXI1"
[ $MINC -gt 0 ] && echo "Wrote $(($MAXC * 100 / $MINC - 100))% more files to larger OST $MAXI1"
test_118() #bug 11710
{
-
+ sync; sleep 1; sync
multiop $DIR/$tfile oO_CREAT:O_RDWR:O_SYNC:w4096c;
- dirty=$(grep -c dirty /proc/fs/lustre/llite/lustre-*/dump_page_cache)
+ dirty=$(grep -c dirty $LPROC/llite/*/dump_page_cache)
return $dirty
}
run_test 118 "verify O_SYNC work"
+test_119a() # bug 11737
+{
+ BSIZE=$((512 * 1024))
+ directio write $DIR/$tfile 0 1 $BSIZE
+ # We ask to read two blocks, which is more than a file size.
+ # directio will indicate an error when requested and actual
+ # sizes aren't equeal (a normal situation in this case) and
+ # print actual read amount.
+ NOB=`directio read $DIR/$tfile 0 2 $BSIZE | awk '/error/ {print $6}'`
+ if [ "$NOB" != "$BSIZE" ]; then
+ error "read $NOB bytes instead of $BSIZE"
+ fi
+ rm -f $DIR/$tfile
+}
+run_test 119a "Short directIO read must return actual read amount"
+
+test_119b() # bug 11737
+{
+ [ "$OSTCOUNT" -lt "2" ] && echo "skipping 2-stripe test" && return
+
+ lfs setstripe $DIR/$tfile 0 -1 2
+ dd if=/dev/zero of=$DIR/$tfile bs=1M count=1 seek=1 || error "dd failed"
+ sync
+ multiop $DIR/$tfile oO_RDONLY:O_DIRECT:r$((2048 * 1024)) || \
+ error "direct read failed"
+}
+run_test 119b "Sparse directIO read must return actual read amount"
+
TMPDIR=$OLDTMPDIR
TMP=$OLDTMP
HOME=$OLDHOME
echo '=========================== finished ==============================='
[ -f "$SANITYLOG" ] && cat $SANITYLOG && exit 1 || true
-echo "$0: completed"
git://git.whamcloud.com / fs / lustre-release.git / blobdiff