# skipped tests: LU-8411 LU-9096 LU-9054 ..
ALWAYS_EXCEPT=" 407 253 312 $ALWAYS_EXCEPT"
-# skipped tests: LU-4684
-ALWAYS_EXCEPT=" 17n 160d 230 316 $ALWAYS_EXCEPT"
+
+if $SHARED_KEY; then
+# bug number for skipped tests: LU-9795 (all below)
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 17n 60a 133g 300f"
+fi
# Check Grants after these tests
GRANT_CHECK_LIST="$GRANT_CHECK_LIST 42a 42b 42c 42d 42e 63a 63b 64a 64b 64c"
-
SRCDIR=$(cd $(dirname $0); echo $PWD)
export PATH=$PATH:/sbin
# bug number for skipped test:
# LU-10334 LU-10335 LU-10335 LU-10335
ALWAYS_EXCEPT+=" 103a 130a 130b 130c"
- # LU-10335 LU-10335 LU-10365 LU-10366
- ALWAYS_EXCEPT+=" 130d 130e 400a 410"
+ # LU-10335 LU-10335 LU-10366
+ ALWAYS_EXCEPT+=" 130d 130e 410"
fi
fi
fi
run_test 27G "Clear OST pool from stripe"
test_27H() {
- [[ $(lustre_version_code $SINGLEMDS) -le $(version_code 2.11.53) ]] &&
- skip "Need MDS version newer than 2.11.53"
+ [[ $(lustre_version_code $SINGLEMDS) -le $(version_code 2.11.54) ]] &&
+ skip "Need MDS version newer than 2.11.54"
[[ $OSTCOUNT -lt 3 ]] && skip_env "needs >= 3 OSTs"
test_mkdir $DIR/$tdir
$LFS setstripe -o 0 -o 2 $DIR/$tdir || error "setstripe failed"
(( $($LFS getstripe -y $DIR/$tdir/$tfile |
egrep -c "l_ost_idx: [02]$") == "2" )) ||
error "expected l_ost_idx: [02]$ not matched"
+
+ # make sure ost list have been cleared
+ local stripesize=$($GETSTRIPE -S $DIR/$tdir)
+ $LFS setstripe -S $((stripesize * 4)) -i 1 \
+ -c $((OSTCOUNT - 1)) $DIR/$tdir || error "setstripe"
+ touch $DIR/$tdir/f3
+ $LVERIFY $DIR/$tdir $DIR/$tdir/f3 || error "lverify failed"
}
run_test 27H "Set specific OSTs stripe"
run_test 56wb "check lfs_migrate pool support"
test_56wc() {
- local file1="$DIR/$tdir/file 1"
+ local file1="$DIR/$tdir/file1"
echo -n "Creating test dir..."
test_mkdir $DIR/$tdir &> /dev/null || error "cannot create dir"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
dmesg > $DIR/$tfile
- LLOG_COUNT=$(dmesg | awk "/$TEST60_HEAD/ { marker = 1; from_marker = 0; }
- /llog.test/ {
- if (marker)
- from_marker++
- from_begin++
- }
- END {
- if (marker)
- print from_marker
- else
- print from_begin
- }")
+ LLOG_COUNT=$(do_facet mgs dmesg |
+ awk "/$TEST60_HEAD/ { marker = 1; from_marker = 0; }
+ /llog_[a-z]*.c:[0-9]/ {
+ if (marker)
+ from_marker++
+ from_begin++
+ }
+ END {
+ if (marker)
+ print from_marker
+ else
+ print from_begin
+ }")
[[ $LLOG_COUNT -gt 100 ]] &&
error "CDEBUG_LIMIT not limiting messages ($LLOG_COUNT)" || true
}
;;
*) error "Wrong facet '$facet'" ;;
esac
- echo $res
[ "$res" ] || error "The counter for $op on $facet was not incremented"
# if the argument $3 is zero, it means any stat increment is ok.
if [[ $want -gt 0 ]]; then
run_test 133a "Verifying MDT stats ========================================"
test_133b() {
+ local res
+
[ $PARALLEL == "yes" ] && skip "skip parallel run"
remote_ost_nodsh && skip "remote OST with nodsh"
remote_mds_nodsh && skip "remote MDS with nodsh"
ls -l ${testdir}/${tfile} > /dev/null|| error "ls failed"
check_stats $SINGLEMDS "getattr" 1
fi
+ rm -rf $DIR/${tdir}
+
+ # when DNE is enabled, MDT uses STATFS RPC to ping other targets
+ # so the check below is not reliable
+ [ $MDSCOUNT -eq 1 ] || return 0
+
# Sleep to avoid a cached response.
#define OBD_STATFS_CACHE_SECONDS 1
sleep 2
+ do_facet $SINGLEMDS $LCTL set_param mdt.*.md_stats=clear
+ do_facet ost1 $LCTL set_param obdfilter.*.stats=clear
$LFS df || error "lfs failed"
check_stats $SINGLEMDS "statfs" 1
- rm -rf $DIR/${tdir}
+ # check aggregated statfs (LU-10018)
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.54) ] &&
+ return 0
+ [ $(lustre_version_code client) -lt $(version_code 2.11.54) ] &&
+ return 0
+ sleep 2
+ do_facet $SINGLEMDS $LCTL set_param mdt.*.md_stats=clear
+ do_facet ost1 $LCTL set_param obdfilter.*.stats=clear
+ df $DIR
+ check_stats $SINGLEMDS "statfs" 1
+ res=$(do_facet ost1 \
+ $LCTL get_param obdfilter.$FSNAME-OST0000.stats | grep "statfs")
+ [ "$res" ] && error "OST got STATFS"
+
+ return 0
}
run_test 133b "Verifying extra MDT stats =================================="
find $proc_dirs -exec cat '{}' \; &> /dev/null
# Second verifying readability.
- $LCTL get_param -R '*' &> /dev/null || error "proc file read failed"
+ $LCTL get_param -R '*' &> /dev/null
# Verifing writability with badarea_io.
find $proc_dirs \
save_writethrough() {
local facets=$(get_facets OST)
- save_lustre_params $facets "obdfilter.*.writethrough_cache_enable" > $1
- save_lustre_params $facets "osd-*.*.writethrough_cache_enable" >> $1
+ save_lustre_params $facets "osd-*.*.writethrough_cache_enable" > $1
}
test_155a() {
}
run_test 184e "Recreate layout after stripeless layout swaps"
+test_184f() {
+ # Create a file with name longer than sizeof(struct stat) ==
+ # 144 to see if we can get chars from the file name to appear
+ # in the returned striping. Note that 'f' == 0x66.
+ local file=$(for ((i = 0; i < 200; i++)); do echo -n f; done)
+
+ mkdir -p $DIR/$tdir
+ mcreate $DIR/$tdir/$file
+ if lfs find --stripe-count 0x6666 $DIR/$tdir | grep $file; then
+ error "IOC_MDC_GETFILEINFO returned garbage striping"
+ fi
+}
+run_test 184f "IOC_MDC_GETFILEINFO for files with long names but no striping"
+
test_185() { # LU-2441
# LU-3553 - no volatile file support in old servers
[[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.3.60) ]] ||
jobstats_set() {
local new_jobenv=$1
- do_facet mgs $LCTL conf_param $FSNAME.sys.jobid_var=$new_jobenv
- wait_update $HOSTNAME "$LCTL get_param -n jobid_var" $new_jobenv
+ set_persistent_param_and_check client "jobid_var" \
+ "$FSNAME.sys.jobid_var" $new_jobenv
}
test_205() { # Job stats
local old_jobenv=$($LCTL get_param -n jobid_var)
[ $old_jobenv != $JOBENV ] && jobstats_set $JOBENV
- stack_trap "do_facet mgs \
- $LCTL conf_param $FSNAME.sys.jobid_var=$old_jobenv" EXIT
+ if [[ $PERM_CMD = *"set_param -P"* ]]; then
+ stack_trap "do_facet mgs $PERM_CMD jobid_var=$old_jobenv" EXIT
+ else
+ stack_trap "do_facet mgs $PERM_CMD \
+ $FSNAME.sys.jobid_var=$old_jobenv" EXIT
+ fi
changelog_register
local old_interval=$(do_facet $SINGLEMDS lctl get_param -n \
osc.*.max_pages_per_rpc)
local at_max=$($LCTL get_param -n at_max)
local timeout=$($LCTL get_param -n timeout)
- local test_at="$LCTL get_param -n at_max"
+ local test_at="at_max"
local param_at="$FSNAME.sys.at_max"
- local test_timeout="$LCTL get_param -n timeout"
+ local test_timeout="timeout"
local param_timeout="$FSNAME.sys.timeout"
$LCTL set_param -n osc.*.max_pages_per_rpc=1024
- set_conf_param_and_check client "$test_at" "$param_at" 0 ||
- error "conf_param at_max=0 failed"
- set_conf_param_and_check client "$test_timeout" "$param_timeout" 5 ||
- error "conf_param timeout=5 failed"
+ set_persistent_param_and_check client "$test_at" "$param_at" 0
+ set_persistent_param_and_check client "$test_timeout" "$param_timeout" 5
#define OBD_FAIL_PTLRPC_CLIENT_BULK_CB3 0x520
do_facet ost1 $LCTL set_param fail_loc=0x520
sync
do_facet ost1 $LCTL set_param fail_loc=0
- set_conf_param_and_check client "$test_at" "$param_at" $at_max ||
- error "conf_param at_max=$at_max failed"
- set_conf_param_and_check client "$test_timeout" "$param_timeout" \
- $timeout || error "conf_param timeout=$timeout failed"
+ set_persistent_param_and_check client "$test_at" "$param_at" $at_max
+ set_persistent_param_and_check client "$test_timeout" "$param_timeout" \
+ $timeout
$LCTL set_param -n $pages_per_rpc
restore_lustre_params < $p
test_230a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ skip "Need MDS version at least 2.11.52"
local MDTIDX=1
test_230b() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ skip "Need MDS version at least 2.11.52"
local MDTIDX=1
local mdt_index
run_test 230b "migrate directory"
test_230c() {
- [ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
+ [ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
remote_mds_nodsh && skip "remote MDS with nodsh"
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ skip "Need MDS version at least 2.11.52"
local MDTIDX=1
+ local total=3
local mdt_index
local file
local migrate_dir=$DIR/$tdir/migrate_dir
#the directory is still accessiable.
test_mkdir $DIR/$tdir
test_mkdir -i0 -c1 $migrate_dir
+ test_mkdir -i1 -c1 $DIR/$tdir/remote_dir
stat $migrate_dir
- createmany -o $migrate_dir/f 10 ||
+ createmany -o $migrate_dir/f $total ||
error "create files under ${migrate_dir} failed"
- #failed after migrating 5 entries
+ # fail after migrating top dir, and this will fail only once, so the
+ # first sub file migration will fail (currently f3), others succeed.
#OBD_FAIL_MIGRATE_ENTRIES 0x1801
- do_facet mds1 lctl set_param fail_loc=0x20001801
- do_facet mds1 lctl set_param fail_val=5
+ do_facet mds1 lctl set_param fail_loc=0x1801
local t=$(ls $migrate_dir | wc -l)
$LFS migrate --mdt-index $MDTIDX $migrate_dir &&
- error "migrate should fail after 5 entries"
-
- mkdir $migrate_dir/dir &&
- error "mkdir succeeds under migrating directory"
- touch $migrate_dir/file &&
- error "touch file succeeds under migrating directory"
-
+ error "migrate should fail"
local u=$(ls $migrate_dir | wc -l)
[ "$u" == "$t" ] || error "$u != $t during migration"
- for file in $(find $migrate_dir); do
- stat $file || error "stat $file failed"
+ # add new dir/file should succeed
+ mkdir $migrate_dir/dir ||
+ error "mkdir failed under migrating directory"
+ touch $migrate_dir/file ||
+ error "create file failed under migrating directory"
+
+ # add file with existing name should fail
+ for file in $migrate_dir/f*; do
+ stat $file > /dev/null || error "stat $file failed"
+ $OPENFILE -f O_CREAT:O_EXCL $file &&
+ error "open(O_CREAT|O_EXCL) $file should fail"
+ $MULTIOP $file m && error "create $file should fail"
+ touch $DIR/$tdir/remote_dir/$tfile ||
+ error "touch $tfile failed"
+ ln $DIR/$tdir/remote_dir/$tfile $file &&
+ error "link $file should fail"
+ mdt_index=$($LFS getstripe -m $file)
+ if [ $mdt_index == 0 ]; then
+ # file failed to migrate is not allowed to rename to
+ mv $DIR/$tdir/remote_dir/$tfile $file &&
+ error "rename to $file should fail"
+ else
+ mv $DIR/$tdir/remote_dir/$tfile $file ||
+ error "rename to $file failed"
+ fi
+ echo hello >> $file || error "write $file failed"
done
- do_facet mds1 lctl set_param fail_loc=0
- do_facet mds1 lctl set_param fail_val=0
+ # resume migration with different options should fail
+ $LFS migrate -m 0 $migrate_dir &&
+ error "migrate -m 0 $migrate_dir should fail"
+
+ $LFS migrate -m $MDTIDX -c 2 $migrate_dir &&
+ error "migrate -c 2 $migrate_dir should fail"
+ # resume migration should succeed
$LFS migrate -m $MDTIDX $migrate_dir ||
- error "migrate open files should failed with open files"
+ error "migrate $migrate_dir failed"
echo "Finish migration, then checking.."
for file in $(find $migrate_dir); do
rm -rf $DIR/$tdir || error "rm dir failed after migration"
}
-run_test 230c "check directory accessiblity if migration is failed"
+run_test 230c "check directory accessiblity if migration failed"
test_230d() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ skip "Need MDS version at least 2.11.52"
+ # LU-11235
+ [ "$(facet_fstype mds1)" == "zfs" ] && skip "skip ZFS backend"
- local MDTIDX=1
- local mdt_index
local migrate_dir=$DIR/$tdir/migrate_dir
+ local old_index
+ local new_index
+ local old_count
+ local new_count
+ local new_hash
+ local mdt_index
local i
local j
+ old_index=$((RANDOM % MDSCOUNT))
+ old_count=$((MDSCOUNT - old_index))
+ new_index=$((RANDOM % MDSCOUNT))
+ new_count=$((MDSCOUNT - new_index))
+ new_hash="all_char"
+
+ [ $old_count -gt 1 ] && old_count=$((old_count - RANDOM % old_count))
+ [ $new_count -gt 1 ] && new_count=$((new_count - RANDOM % new_count))
+
test_mkdir $DIR/$tdir
- test_mkdir -i0 -c1 $migrate_dir
+ test_mkdir -i $old_index -c $old_count $migrate_dir
for ((i=0; i<100; i++)); do
test_mkdir -i0 -c1 $migrate_dir/dir_${i}
error "create files under remote dir failed $i"
done
- $LFS migrate -m $MDTIDX $migrate_dir ||
+ echo -n "Migrate from MDT$old_index "
+ [ $old_count -gt 1 ] && echo -n "... MDT$((old_index + old_count - 1)) "
+ echo -n "to MDT$new_index"
+ [ $new_count -gt 1 ] && echo -n " ... MDT$((new_index + new_count - 1))"
+ echo
+
+ echo "$LFS migrate -m$new_index -c$new_count -H $new_hash $migrate_dir"
+ $LFS migrate -m $new_index -c $new_count -H $new_hash $migrate_dir ||
error "migrate remote dir error"
echo "Finish migration, then checking.."
for file in $(find $migrate_dir); do
mdt_index=$($LFS getstripe -m $file)
- [ $mdt_index == $MDTIDX ] ||
- error "$file is not on MDT${MDTIDX}"
+ if [ $mdt_index -lt $new_index ] ||
+ [ $mdt_index -gt $((new_index + new_count - 1)) ]; then
+ error "$file is on MDT$mdt_index"
+ fi
done
rm -rf $DIR/$tdir || error "rm dir failed after migration"
test_230e() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ skip "Need MDS version at least 2.11.52"
local i
local j
test_230f() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ skip "Need MDS version at least 2.11.52"
local a_fid
local ln_fid
test_230g() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ skip "Need MDS version at least 2.11.52"
mkdir -p $DIR/$tdir/migrate_dir
test_230h() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.64) ] &&
- skip "Need MDS version at least 2.7.64"
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ skip "Need MDS version at least 2.11.52"
local mdt_index
$LFS migrate -m1 $DIR/$tdir/.. &&
error "migrating mountpoint2 should fail"
- $LFS migrate -m1 $DIR/$tdir/migrate_dir/.. ||
- error "migrating $tdir fail"
-
- mdt_index=$($LFS getstripe -m $DIR/$tdir)
- [ $mdt_index == 1 ] || error "$mdt_index != 1 after migration"
-
- mdt_index=$($LFS getstripe -m $DIR/$tdir/migrate_dir)
- [ $mdt_index == 1 ] || error "$mdt_index != 1 after migration"
+ # same as mv
+ $LFS migrate -m1 $DIR/$tdir/migrate_dir/.. &&
+ error "migrating $tdir/migrate_dir/.. should fail"
+ true
}
run_test 230h "migrate .. and root"
test_230i() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ skip "Need MDS version at least 2.11.52"
mkdir -p $DIR/$tdir/migrate_dir
}
run_test 236 "Layout swap on open unlinked file"
-# test to verify file handle related system calls
-# (name_to_handle_at/open_by_handle_at)
-# The new system calls are supported in glibc >= 2.14.
-
-test_237() {
- echo "Test file_handle syscalls" > $DIR/$tfile ||
- error "write failed"
- check_fhandle_syscalls $DIR/$tfile ||
- error "check_fhandle_syscalls failed"
-}
-run_test 237 "Verify name_to_handle_at/open_by_handle_at syscalls"
-
# LU-4659 linkea consistency
test_238() {
local server_version=$(lustre_version_code $SINGLEMDS)
}
run_test 271f "DoM: read on open (200K file and read tail)"
+test_272a() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.50) ] &&
+ skip "Need MDS version at least 2.11.50"
+
+ local dom=$DIR/$tdir/dom
+ mkdir -p $DIR/$tdir
+
+ $LFS setstripe -E 256K -L mdt -E -1 -c1 $dom
+ dd if=/dev/urandom of=$dom bs=512K count=1 ||
+ error "failed to write data into $dom"
+ local old_md5=$(md5sum $dom)
+
+ $LFS migrate -E 256K -L mdt -E -1 -c2 $dom ||
+ error "failed to migrate to the same DoM component"
+
+ [ $($LFS getstripe -c $dom) -eq 2 ] ||
+ error "layout was not changed silently"
+
+ local new_md5=$(md5sum $dom)
+
+ [ "$old_md5" != "$new_md5" ] &&
+ error "md5sum differ: $old_md5, $new_md5"
+ return 0
+}
+run_test 272a "DoM migration: new layout with the same DOM component"
+
+test_272b() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.50) ] &&
+ skip "Need MDS version at least 2.11.50"
+
+ local dom=$DIR/$tdir/dom
+ mkdir -p $DIR/$tdir
+ $LFS setstripe -E 1M -L mdt -E -1 -c1 $dom
+
+ local mdtidx=$($LFS getstripe -m $dom)
+ local mdtname=MDT$(printf %04x $mdtidx)
+ local facet=mds$((mdtidx + 1))
+
+ local mdtfree1=$(do_facet $facet \
+ lctl get_param -n osd*.*$mdtname.kbytesfree)
+ dd if=/dev/urandom of=$dom bs=2M count=1 ||
+ error "failed to write data into $dom"
+ local old_md5=$(md5sum $dom)
+ cancel_lru_locks mdc
+ local mdtfree1=$(do_facet $facet \
+ lctl get_param -n osd*.*$mdtname.kbytesfree)
+
+ $LFS migrate -c2 $dom ||
+ error "failed to migrate to the new composite layout"
+ [ $($LFS getstripe -L $dom) == 'mdt' ] &&
+ error "MDT stripe was not removed"
+
+ cancel_lru_locks mdc
+ local new_md5=$(md5sum $dom)
+ [ "$old_md5" != "$new_md5" ] &&
+ error "$old_md5 != $new_md5"
+
+ # Skip free space checks with ZFS
+ if [ "$(facet_fstype $facet)" != "zfs" ]; then
+ local mdtfree2=$(do_facet $facet \
+ lctl get_param -n osd*.*$mdtname.kbytesfree)
+ [ $mdtfree2 -gt $mdtfree1 ] ||
+ error "MDT space is not freed after migration"
+ fi
+ return 0
+}
+run_test 272b "DoM migration: DOM file to the OST-striped file (plain)"
+
+test_272c() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.50) ] &&
+ skip "Need MDS version at least 2.11.50"
+
+ local dom=$DIR/$tdir/$tfile
+ mkdir -p $DIR/$tdir
+ $LFS setstripe -E 1M -L mdt -E -1 -c1 $dom
+
+ local mdtidx=$($LFS getstripe -m $dom)
+ local mdtname=MDT$(printf %04x $mdtidx)
+ local facet=mds$((mdtidx + 1))
+
+ dd if=/dev/urandom of=$dom bs=2M count=1 oflag=direct ||
+ error "failed to write data into $dom"
+ local old_md5=$(md5sum $dom)
+ cancel_lru_locks mdc
+ local mdtfree1=$(do_facet $facet \
+ lctl get_param -n osd*.*$mdtname.kbytesfree)
+
+ $LFS migrate -E 2M -c1 -E -1 -c2 $dom ||
+ error "failed to migrate to the new composite layout"
+ [ $($LFS getstripe -L $dom) == 'mdt' ] &&
+ error "MDT stripe was not removed"
+
+ cancel_lru_locks mdc
+ local new_md5=$(md5sum $dom)
+ [ "$old_md5" != "$new_md5" ] &&
+ error "$old_md5 != $new_md5"
+
+ # Skip free space checks with ZFS
+ if [ "$(facet_fstype $facet)" != "zfs" ]; then
+ local mdtfree2=$(do_facet $facet \
+ lctl get_param -n osd*.*$mdtname.kbytesfree)
+ [ $mdtfree2 -gt $mdtfree1 ] ||
+ error "MDS space is not freed after migration"
+ fi
+ return 0
+}
+run_test 272c "DoM migration: DOM file to the OST-striped file (composite)"
+
+test_273a() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.50) ] &&
+ skip "Need MDS version at least 2.11.50"
+
+ # Layout swap cannot be done if either file has DOM component,
+ # this will never be supported, migration should be used instead
+
+ local dom=$DIR/$tdir/$tfile
+ mkdir -p $DIR/$tdir
+
+ $LFS setstripe -c2 ${dom}_plain
+ $LFS setstripe -E 1M -L mdt -E -1 -c2 ${dom}_dom
+ $LFS swap_layouts ${dom}_plain ${dom}_dom &&
+ error "can swap layout with DoM component"
+ $LFS swap_layouts ${dom}_dom ${dom}_plain &&
+ error "can swap layout with DoM component"
+
+ $LFS setstripe -E 1M -c1 -E -1 -c2 ${dom}_comp
+ $LFS swap_layouts ${dom}_comp ${dom}_dom &&
+ error "can swap layout with DoM component"
+ $LFS swap_layouts ${dom}_dom ${dom}_comp &&
+ error "can swap layout with DoM component"
+ return 0
+}
+run_test 273a "DoM: layout swapping should fail with DOM"
+
test_275() {
remote_ost_nodsh && skip "remote OST with nodsh"
[ $(lustre_version_code ost1) -lt $(version_code 2.10.57) ] &&
#define OBD_FAIL_LARGE_STRIPE 0x1703
$LCTL set_param fail_loc=0x1703
- $LFS setdirstripe -i 0 -c512 $DIR/$tdir/striped_dir ||
+ $LFS setdirstripe -i 0 -c192 $DIR/$tdir/striped_dir ||
error "set striped dir error"
$LCTL set_param fail_loc=0
if ! [[ -d $prefix ]]; then
# Assume we're running in tree and fixup the include path.
- extra_flags+=" -I$LUSTRE/include"
- extra_flags+=" -L$LUSTRE/utils"
+ extra_flags+=" -I$LUSTRE/../lnet/include/uapi -I$LUSTRE/include/uapi -I$LUSTRE/include"
+ extra_flags+=" -L$LUSTRE/utils/.lib"
fi
for prog in $LUSTRE_TESTS_API_DIR/*.c; do
- $CC -Wall -Werror $extra_flags -llustreapi -o $out $prog ||
+ $CC -Wall -Werror $extra_flags -o $out $prog -llustreapi ||
error "client api broken"
done
rm -f $out
echo 1M > $cgdir/memory.limit_in_bytes
# Should not LBUG, just be killed by oom-killer
- sh -c "echo \$$ > $cgdir/tasks && dd if=$DIR/$tfile of=/dev/null" &&
- error "fail to trigger a memory allocation error"
-
+ # dd will return 0 even allocation failure in some environment.
+ # So don't check return value
+ sh -c "echo \$$ > $cgdir/tasks && dd if=$DIR/$tfile of=/dev/null"
cleanup_test411_cgroup $cgdir
return 0
}
run_test 415 "lock revoke is not missing"
+
+test_416() {
+ [ $(lustre_version_code mds1) -lt $(version_code 2.11.55) ] &&
+ skip "Need server version at least 2.11.55"
+
+ # define OBD_FAIL_OSD_TXN_START 0x19a
+ do_facet mds1 lctl set_param fail_loc=0x19a
+
+ lfs mkdir -c $MDSCOUNT $DIR/$tdir
+
+ true
+}
+run_test 416 "transaction start failure won't cause system hung"
+
prep_801() {
[[ $(lustre_version_code mds1) -lt $(version_code 2.9.55) ]] ||
[[ $(lustre_version_code ost1) -lt $(version_code 2.9.55) ]] &&
}
run_test 807 "verify LSOM syncing tool"
+check_som_nologged()
+{
+ local lines=$($LFS changelog $FSNAME-MDT0000 |
+ grep 'x=trusted.som' | wc -l)
+ [ $lines -ne 0 ] && error "trusted.som xattr is logged in Changelogs"
+}
+
+test_808() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.55) ] &&
+ skip "Need MDS version at least 2.11.55" && return
+
+ # Registration step
+ changelog_register || error "changelog_register failed"
+
+ touch $DIR/$tfile || error "touch $tfile failed"
+ check_som_nologged
+
+ dd if=/dev/zero of=$DIR/$tfile bs=1048576 count=1 ||
+ error "write $tfile failed"
+ check_som_nologged
+
+ $TRUNCATE $DIR/$tfile 1234
+ check_som_nologged
+
+ $TRUNCATE $DIR/$tfile 1048576
+ check_som_nologged
+
+ # Deregistration step
+ changelog_deregister || error "changelog_deregister failed"
+}
+run_test 808 "Check trusted.som xattr not logged in Changelogs"
+
#
# tests that do cleanup/setup should be run at the end
#
git://git.whamcloud.com / fs / lustre-release.git / blobdiff