STRIPES_PER_OBJ=-1
CHECK_GRANT=${CHECK_GRANT:-"yes"}
GRANT_CHECK_LIST=${GRANT_CHECK_LIST:-""}
+export PARALLEL=${PARALLEL:-"no"}
export NAME=${NAME:-local}
test_17h() { #bug 17378
remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local mdt_idx
test_mkdir -p $DIR/$tdir
if [ $MDSCOUNT -gt 1 ]; then
test_17i() { #bug 20018
remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir
local foo=$DIR/$tdir/$tfile
local mdt_idx
test_17k() { #bug 22301
rsync --help | grep -q xattr ||
skip_env "$(rsync --version| head -1) does not support xattrs"
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir
test_mkdir -p $DIR/$tdir.new
touch $DIR/$tdir/$tfile
[ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
skip "only for ldiskfs MDT" && return 0
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+
mkdir -p $WDIR
long_sym=$short_sym
# create a long symlink file
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+
mkdir -p $DIR/$tdir
for ((i=0; i<10; i++)); do
$LFS mkdir -i 1 $DIR/$tdir/remote_dir_${i} ||
}
run_test 24p "mkdir .../R12{a,b}; rename .../R12a .../R12b"
+cleanup_multiop_pause() {
+ trap 0
+ kill -USR1 $MULTIPID
+}
+
test_24q() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir $DIR/R13a
test_mkdir $DIR/R13b
- DIRINO=`ls -lid $DIR/R13a | awk '{ print $1 }'`
- multiop_bg_pause $DIR/R13b D_c || return 1
+ local DIRINO=$(ls -lid $DIR/R13a | awk '{ print $1 }')
+ multiop_bg_pause $DIR/R13b D_c || error "multiop failed to start"
MULTIPID=$!
+ trap cleanup_multiop_pause EXIT
mrename $DIR/R13a $DIR/R13b
- $CHECKSTAT -a $DIR/R13a || error
- $CHECKSTAT -t dir $DIR/R13b || error
- DIRINO2=`ls -lid $DIR/R13b | awk '{ print $1 }'`
+ $CHECKSTAT -a $DIR/R13a || error "R13a still exists"
+ $CHECKSTAT -t dir $DIR/R13b || error "R13b does not exist"
+ local DIRINO2=$(ls -lid $DIR/R13b | awk '{ print $1 }')
[ "$DIRINO" = "$DIRINO2" ] || error "R13a $DIRINO != R13b $DIRINO2"
- kill -USR1 $MULTIPID
+ cleanup_multiop_pause
wait $MULTIPID || error "multiop close failed"
}
run_test 24q "mkdir .../R13{a,b}; open R13b rename R13a R13b ==="
skip "not enough free inodes $FREE_INODES required $NRFILES" &&
return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
trap simple_cleanup_common EXIT
mkdir -p $DIR/$tdir
test_24x() {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local MDTIDX=1
local remote_dir=$DIR/$tdir/remote_dir
test_24y() {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local MDTIDX=1
local remote_dir=$DIR/$tdir/remote_dir
test_24z() {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local MDTIDX=1
local remote_src=$DIR/$tdir/remote_dir
local remote_tgt=$DIR/$tdir/remote_tgt
test_27n() {
[ "$OSTCOUNT" -lt "2" ] && skip_env "too few OSTs" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
test_27o() {
[ "$OSTCOUNT" -lt "2" ] && skip_env "too few OSTs" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
test_27p() {
[ "$OSTCOUNT" -lt "2" ] && skip_env "too few OSTs" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
test_27q() {
[ "$OSTCOUNT" -lt "2" ] && skip_env "too few OSTs" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
test_27r() {
[ "$OSTCOUNT" -lt "2" ] && skip_env "too few OSTs" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
test_27v() { # bug 4900
[ "$OSTCOUNT" -lt "2" ] && skip_env "too few OSTs" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
test_27x() {
remote_ost_nodsh && skip "remote OST with nodsh" && return
[ "$OSTCOUNT" -lt "2" ] && skip_env "$OSTCOUNT < 2 OSTs" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
OFFSET=$(($OSTCOUNT - 1))
OSTIDX=0
local OST=$(ostname_from_index $OSTIDX)
[ "$OSTCOUNT" -lt "2" ] && skip_env "$OSTCOUNT < 2 OSTs -- skipping" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local mdtosc=$(get_mdtosc_proc_path $SINGLEMDS $FSNAME-OST0000)
local last_id=$(do_facet $SINGLEMDS lctl get_param -n \
# { error "mounting $dev as $FSTYPE failed"; return 3; }
#local obj_file=$(do_facet ost$ost find $dir/O/$seq -name $oid)
#local ff=$(do_facet ost$ost $LL_DECODE_FILTER_FID $obj_file)
-
- local obj_file="O/$seq/d$((oid %32))/$oid"
+ seq=$(echo $seq | sed -e "s/^0x//g")
+ if [ $seq == 0 ]; then
+ oid_hex=$(echo $oid)
+ else
+ oid_hex=$(echo $hex | sed -e "s/^0x//g")
+ fi
+ local obj_file="O/$seq/d$((oid %32))/$oid_hex"
local ff=$(do_facet ost$ost "$DEBUGFS -c -R 'stat $obj_file' \
$dev 2>/dev/null" | grep "parent=")
test_27z() {
remote_ost_nodsh && skip "remote OST with nodsh" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir
$SETSTRIPE -c 1 -i 0 -S 64k $DIR/$tdir/$tfile-1 ||
run_test 27z "check SEQ/OID on the MDT and OST filesystems"
test_27A() { # b=19102
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local restore_size=$($GETSTRIPE -S $MOUNT)
local restore_count=$($GETSTRIPE -c $MOUNT)
local restore_offset=$($GETSTRIPE -i $MOUNT)
run_test 28 "create/mknod/mkdir with bad file types ============"
test_29() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
cancel_lru_locks mdc
test_mkdir $DIR/d29
touch $DIR/d29/foo
run_test 30b "execute binary from Lustre as non-root ==========="
test_30c() { # b=22376
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
cp `which ls` $DIR || cp /bin/ls $DIR
chmod a-rw $DIR/ls
cancel_lru_locks mdc
run_test 31e "remove of open non-empty directory ==============="
test_31f() { # bug 4554
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
set -vx
test_mkdir $DIR/d31f
$SETSTRIPE -S 1048576 -c 1 $DIR/d31f
}
test_32a() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
echo "== more mountpoints and symlinks ================="
[ -e $DIR/$tdir ] && rm -fr $DIR/$tdir
trap cleanup_test32_mount EXIT
run_test 32a "stat d32a/ext2-mountpoint/.. ====================="
test_32b() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ -e $DIR/$tdir ] && rm -fr $DIR/$tdir
trap cleanup_test32_mount EXIT
test_mkdir -p $DIR/$tdir/ext2-mountpoint
run_test 32b "open d32b/ext2-mountpoint/.. ====================="
test_32c() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ -e $DIR/$tdir ] && rm -fr $DIR/$tdir
trap cleanup_test32_mount EXIT
test_mkdir -p $DIR/$tdir/ext2-mountpoint
run_test 32c "stat d32c/ext2-mountpoint/../d2/test_dir ========="
test_32d() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ -e $DIR/$tdir ] && rm -fr $DIR/$tdir
trap cleanup_test32_mount EXIT
test_mkdir -p $DIR/$tdir/ext2-mountpoint
run_test 32h "open d32h/symlink->tmp/symlink->lustre-subdir/${tdir}2"
test_32i() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ -e $DIR/$tdir ] && rm -fr $DIR/$tdir
trap cleanup_test32_mount EXIT
test_mkdir -p $DIR/$tdir/ext2-mountpoint
run_test 32i "stat d32i/ext2-mountpoint/../test_file ==========="
test_32j() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ -e $DIR/$tdir ] && rm -fr $DIR/$tdir
trap cleanup_test32_mount EXIT
test_mkdir -p $DIR/$tdir/ext2-mountpoint
run_test 32j "open d32j/ext2-mountpoint/../test_file ==========="
test_32k() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
rm -fr $DIR/$tdir
trap cleanup_test32_mount EXIT
test_mkdir -p $DIR/$tdir/ext2-mountpoint
run_test 32k "stat d32k/ext2-mountpoint/../d2/test_file ========"
test_32l() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
rm -fr $DIR/$tdir
trap cleanup_test32_mount EXIT
test_mkdir -p $DIR/$tdir/ext2-mountpoint
}
test_32q() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ -e $DIR/$tdir ] && rm -fr $DIR/$tdir
trap cleanup_testdir_mount EXIT
test_mkdir -p $DIR/$tdir
run_test 32q "stat follows mountpoints in Lustre (should return error)"
test_32r() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ -e $DIR/$tdir ] && rm -fr $DIR/$tdir
trap cleanup_testdir_mount EXIT
test_mkdir -p $DIR/$tdir
run_test 33b "test open file with malformed flags (No panic and return error)"
test_33c() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local ostnum
local ostname
local write_bytes
test_33d() {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local MDTIDX=1
local remote_dir=$DIR/$tdir/remote_dir
run_test 34e "create objects, some with size and some without =="
test_34f() { # bug 6242, 6243
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
SIZE34F=48000
rm -f $DIR/f34f
$MCREATE $DIR/f34f || error
run_test 34f "read from a file with no objects until EOF ======="
test_34g() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
dd if=/dev/zero of=$DIR/$tfile bs=1 count=100 seek=$TEST_34_SIZE || error
$TRUNCATE $DIR/$tfile $((TEST_34_SIZE / 2))|| error
$CHECKSTAT -s $((TEST_34_SIZE / 2)) $DIR/$tfile || error "truncate failed"
run_test 34g "truncate long file ==============================="
test_34h() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local gid=10
local sz=1000
}
test_36f() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
#define OBD_FAIL_OST_BRW_PAUSE_BULK 0x214
subr_36fh "0x80000214"
}
test_36g() {
remote_ost_nodsh && skip "remote OST with nodsh" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local fmd_max_age
local fmd_before
local fmd_after
run_test 36g "filter mod data cache expiry ====================="
test_36h() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
#define OBD_FAIL_OST_BRW_PAUSE_BULK2 0x227
subr_36fh "0x80000227"
}
# bug 21114
test_39d() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
touch $DIR1/$tfile
touch -m -d @$TEST_39_MTIME $DIR1/$tfile
# bug 21114
test_39e() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
touch $DIR1/$tfile
local mtime1=`stat -c %Y $DIR1/$tfile`
# bug 21114
test_39f() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
touch $DIR1/$tfile
mtime1=`stat -c %Y $DIR1/$tfile`
# bug 11063
test_39g() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
echo hello >> $DIR1/$tfile
local mtime1=`stat -c %Y $DIR1/$tfile`
# bug 11063
test_39h() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
touch $DIR1/$tfile
sleep 1
run_test 39h "write, utime within one second, stat ============="
test_39i() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
touch $DIR1/$tfile
sleep 1
run_test 39i "write, rename, stat =============================="
test_39j() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
start_full_debug_logging
touch $DIR1/$tfile
sleep 1
run_test 39j "write, rename, close, stat ======================="
test_39k() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
touch $DIR1/$tfile
sleep 1
TEST_39_ATIME=`date -d "1 year" +%s`
test_39l() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
local atime_diff=$(do_facet $SINGLEMDS \
lctl get_param -n mdd.*MDT0000*.atime_diff)
run_test 39l "directory atime update ==========================="
test_39m() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
touch $DIR1/$tfile
sleep 2
local far_past_mtime=$(date -d "May 29 1953" +%s)
# Tests 42* verify that our behaviour is correct WRT caching, file closure,
# file truncation, and file removal.
test_42a() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
setup_test42
cancel_lru_locks osc
stop_writeback
run_test 42a "ensure that we don't flush on close =============="
test_42b() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
setup_test42
cancel_lru_locks osc
stop_writeback
}
test_42c() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
trunc_test 42c 1024
[ $BEFOREWRITES -eq $AFTERWRITES ] && \
error "beforewrites $BEFOREWRITES == afterwrites $AFTERWRITES on truncate"
run_test 42c "test partial truncate of file with cached dirty data"
test_42d() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
trunc_test 42d 0
[ $BEFOREWRITES -eq $AFTERWRITES ] || \
error "beforewrites $BEFOREWRITES != afterwrites $AFTERWRITES on truncate"
run_test 42d "test complete truncate of file with cached dirty data"
test_42e() { # bug22074
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local TDIR=$DIR/${tdir}e
local pagesz=$(page_size)
local pages=16 # hardcoded 16 pages, don't change it.
run_test 43 "execution of file opened for write should return -ETXTBSY"
test_43a() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir
cp -p `which $MULTIOP` $DIR/$tdir/multiop ||
cp -p multiop $DIR/$tdir/multiop
run_test 43a "open(RDWR) of file being executed should return -ETXTBSY"
test_43b() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir
cp -p `which $MULTIOP` $DIR/$tdir/multiop ||
cp -p multiop $DIR/$tdir/multiop
echo before $before, after $after
}
test_45() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
f="$DIR/f45"
# Obtain grants from OST if it supports it
echo blah > ${f}_grant
# objects offset and an assert hit when an rpc was built with 1023's mapped
# offset 511 and 511's raw 511 offset. it also found general redirtying bugs.
test_46() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
f="$DIR/f46"
stop_writeback
sync
run_test 48e "Access to recreated parent subdir (should return errors)"
test_49() { # LU-1030
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
# get ost1 size - lustre-OST0000
ost1_size=$(do_facet ost1 lfs df |grep ${ost1_svc} |awk '{print $4}')
# write 800M at maximum
export NUMTEST=70000
test_51b() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local BASE=$DIR/$tdir
test_mkdir -p $BASE
run_test 51ba "verify nlink for many subdirectory cleanup"
test_51d() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ "$OSTCOUNT" -lt "3" ] && skip_env "skipping test with few OSTs" && return
test_mkdir -p $DIR/$tdir
createmany -o $DIR/$tdir/t- 1000
run_test 52b "immutable flag test (should return errors) ======="
test_53() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
local mds_last
local ost_last
local ostnum
+ local node
# only test MDT0000
local mdtosc=$(get_mdtosc_proc_path $SINGLEMDS)
param=`echo ${value[0]} | cut -d "=" -f1`
ostname=`echo $param | cut -d "." -f2 | cut -d - -f 1-2`
mds_last=$(do_facet $SINGLEMDS lctl get_param -n $param)
- ostnum=$(echo $ostname | sed "s/${FSNAME}-OST//g" | awk '{print ($1+1)}' )
- ost_last=$(do_facet ost$ostnum lctl get_param -n obdfilter.$ostname.last_id | head -n 1)
+ ostnum=$(index_from_ostuuid ${ostname}_UUID)
+ node=$(facet_active_host ost$((ostnum+1)))
+ param="obdfilter.$ostname.last_id"
+ ost_last=$(do_node $node lctl get_param -n $param | head -n 1)
echo "$ostname.last_id=$ost_last ; MDS.last_id=$mds_last"
if [ $ost_last != $mds_last ]; then
error "$ostname.last_id=$ost_last ; MDS.last_id=$mds_last"
}
test_54c() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
tfile="$DIR/f54c"
tdir="$DIR/d54c"
loopdev="$DIR/loop54c"
}
test_56w() {
- TDIR=$DIR/${tdir}w
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ TDIR=$DIR/${tdir}w
rm -rf $TDIR || error "remove $TDIR failed"
setup_56 $NUMFILES $NUMDIRS "-c $OSTCOUNT"
run_test 56w "check lfs_migrate -c stripe_count works"
test_57a() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
# note test will not do anything if MDS is not local
if [ "$(facet_fstype $SINGLEMDS)" != ldiskfs ]; then
skip "Only applicable to ldiskfs-based MDTs"
run_test 57a "verify MDS filesystem created with large inodes =="
test_57b() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
if [ "$(facet_fstype $SINGLEMDS)" != ldiskfs ]; then
skip "Only applicable to ldiskfs-based MDTs"
return
run_test 57b "default LOV EAs are stored inside large inodes ==="
test_58() {
- [ -z "$(which wiretest 2>/dev/null)" ] && skip_env "could not find wiretest" && return
- wiretest
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ [ -z "$(which wiretest 2>/dev/null)" ] &&
+ skip_env "could not find wiretest" && return
+ wiretest
}
run_test 58 "verify cross-platform wire constants =============="
test_59() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
echo "touch 130 files"
createmany -o $DIR/f59- 130
echo "rm 130 files"
TEST60_HEAD="test_60 run $RANDOM"
test_60a() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mgs_nodsh && skip "remote MGS with nodsh" && return
[ ! -f run-llog.sh ] && skip_env "missing subtest run-llog.sh" && return
log "$TEST60_HEAD - from kernel mode"
run_test 60a "llog sanity tests run from kernel module =========="
test_60b() { # bug 6411
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
dmesg > $DIR/$tfile
LLOG_COUNT=`dmesg | awk "/$TEST60_HEAD/{marker = 1; from_marker = 0;}
/llog.test/ {
run_test 60b "limit repeated messages from CERROR/CWARN ========"
test_60c() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
echo "create 5000 files"
createmany -o $DIR/f60c- 5000
#define OBD_FAIL_MDS_LLOG_CREATE_FAILED 0x137
run_test 60c "unlink file when mds full"
test_60d() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
SAVEPRINTK=$(lctl get_param -n printk)
# verify "lctl mark" is even working"
run_test 60d "test printk console message masking"
test_61() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
f="$DIR/f61"
dd if=/dev/zero of=$f bs=`page_size` count=1
cancel_lru_locks osc
# bug 2330 - insufficient obd_match error checking causes LBUG
test_62() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
f="$DIR/f62"
echo foo > $f
cancel_lru_locks osc
# bug 2319 - oig_wait() interrupted causes crash because of invalid waitq.
test_63a() { # was test_63
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
MAX_DIRTY_MB=`lctl get_param -n osc.*.max_dirty_mb | head -n 1`
lctl set_param -n osc.*.max_dirty_mb 0
for i in `seq 10` ; do
# bug 2248 - async write errors didn't return to application on sync
# bug 3677 - async write errors left page locked
test_63b() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
debugsave
lctl set_param debug=-1
run_test 63b "async write errors should be returned to fsync ==="
test_64a () {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
df $DIR
lctl get_param -n osc.*[oO][sS][cC][_-]*.cur* | grep "[0-9]"
}
run_test 64a "verify filter grant calculations (in kernel) ====="
test_64b () {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ ! -f oos.sh ] && skip_env "missing subtest oos.sh" && return
sh oos.sh $MOUNT
}
# bug 1414 - set/get directories' stripe info
test_65a() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir
touch $DIR/$tdir/f1
$LVERIFY $DIR/$tdir $DIR/$tdir/f1 || error "lverify failed"
run_test 65a "directory with no stripe info ===================="
test_65b() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir
$SETSTRIPE -S $((STRIPESIZE * 2)) -i 0 -c 1 $DIR/$tdir ||
error "setstripe"
run_test 65b "directory setstripe -S $((STRIPESIZE * 2)) -i 0 -c 1"
test_65c() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
if [ $OSTCOUNT -gt 1 ]; then
test_mkdir -p $DIR/$tdir
$SETSTRIPE -S $(($STRIPESIZE * 4)) -i 1 \
run_test 65c "directory setstripe -S $((STRIPESIZE*4)) -i 1 -c $((OSTCOUNT-1))"
test_65d() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir
if [ $STRIPECOUNT -le 0 ]; then
sc=1
run_test 65d "directory setstripe -S $STRIPESIZE -c stripe_count"
test_65e() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir
$SETSTRIPE $DIR/$tdir || error "setstripe"
run_test 65e "directory setstripe defaults ======================="
test_65f() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/${tdir}f
$RUNAS $SETSTRIPE $DIR/${tdir}f && error "setstripe succeeded" || true
}
run_test 65f "dir setstripe permission (should return error) ==="
test_65g() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir
$SETSTRIPE -S $((STRIPESIZE * 2)) -i 0 -c 1 $DIR/$tdir ||
error "setstripe"
run_test 65g "directory setstripe -d ==========================="
test_65h() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir
$SETSTRIPE -S $((STRIPESIZE * 2)) -i 0 -c 1 $DIR/$tdir ||
error "setstripe"
run_test 65h "directory stripe info inherit ===================="
test_65i() { # bug6367
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$SETSTRIPE -S 65536 -c -1 $MOUNT
}
run_test 65i "set non-default striping on root directory (bug 6367)="
test_65ia() { # bug12836
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$GETSTRIPE $MOUNT || error "getstripe $MOUNT failed"
}
run_test 65ia "getstripe on -1 default directory striping"
test_65ib() { # bug12836
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$GETSTRIPE -v $MOUNT || error "getstripe -v $MOUNT failed"
}
run_test 65ib "getstripe -v on -1 default directory striping"
test_65ic() { # bug12836
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$LFS find -mtime -1 $MOUNT > /dev/null || error "find $MOUNT failed"
}
run_test 65ic "new find on -1 default directory striping"
test_65j() { # bug6367
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
sync; sleep 1
# if we aren't already remounting for each test, do so for this test
if [ "$CLEANUP" = ":" -a "$I_MOUNTED" = "yes" ]; then
run_test 65j "set default striping on root directory (bug 6367)="
test_65k() { # bug11679
- [ "$OSTCOUNT" -lt 2 ] && skip_env "too few OSTs" && return
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ [ "$OSTCOUNT" -lt 2 ] && skip_env "too few OSTs" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
echo "Check OST status: "
local MDS_OSCS=`do_facet $SINGLEMDS lctl dl |
run_test 65k "validate manual striping works properly with deactivated OSCs"
test_65l() { # bug 12836
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir/test_dir
$SETSTRIPE -c -1 $DIR/$tdir/test_dir
$LFS find -mtime -1 $DIR/$tdir >/dev/null
# bug 2543 - update blocks count on client
test_66() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
COUNT=${COUNT:-8}
dd if=/dev/zero of=$DIR/f66 bs=1k count=$COUNT
sync; sync_all_data; sync; sync_all_data
LLOOP=
LLITELOOPLOAD=
cleanup_68() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
trap 0
if [ ! -z "$LLOOP" ]; then
if swapon -s | grep -q $LLOOP; then
# test case for lloop driver, basic function
test_68a() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ "$UID" != 0 ] && skip_env "must run as root" && return
llite_lloop_enabled || \
{ skip_env "llite_lloop module disabled" && return; }
# excercise swapping to lustre by adding a high priority swapfile entry
# and then consuming memory until it is used.
test_68b() { # was test_68
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ "$UID" != 0 ] && skip_env "must run as root" && return
lctl get_param -n devices | grep -q obdfilter && \
skip "local OST" && return
# bug5265, obdfilter oa2dentry return -ENOENT
# #define OBD_FAIL_OST_ENOENT 0x217
test_69() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
f="$DIR/$tfile"
run_test 71 "Running dbench on lustre (don't segment fault) ===="
test_72a() { # bug 5695 - Test that on 2.6 remove_suid works properly
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
check_kernel_version 43 || return 0
[ "$RUNAS_ID" = "$UID" ] && skip_env "RUNAS_ID = UID = $UID -- skipping" && return
[ "$RUNAS_ID" -eq 0 ] && \
skip_env "RUNAS_ID = 0 -- skipping" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
# Check that testing environment is properly set up. Skip if not
FAIL_ON_ERROR=false check_runas_id_ret $RUNAS_ID $RUNAS_ID $RUNAS || {
skip_env "User $RUNAS_ID does not exist - skipping"
# bug 3462 - multiple simultaneous MDC requests
test_73() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir $DIR/d73-1
test_mkdir $DIR/d73-2
multiop_bg_pause $DIR/d73-1/f73-1 O_c || return 1
run_test 73 "multiple MDC requests (should not deadlock)"
test_74a() { # bug 6149, 6184
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
#define OBD_FAIL_LDLM_ENQUEUE_OLD_EXPORT 0x30e
#
# very important to OR with OBD_FAIL_ONCE (0x80000000) -- otherwise it
run_test 74a "ldlm_enqueue freed-export error path, ls (shouldn't LBUG)"
test_74b() { # bug 13310
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
#define OBD_FAIL_LDLM_ENQUEUE_OLD_EXPORT 0x30e
#
# very important to OR with OBD_FAIL_ONCE (0x80000000) -- otherwise it
run_test 74b "ldlm_enqueue freed-export error path, touch (shouldn't LBUG)"
test_74c() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
#define OBD_FAIL_LDLM_NEW_LOCK
lctl set_param fail_loc=0x80000319
touch $DIR/$tfile && error "Touch successful"
}
test_76() { # Now for bug 20433, added originally in bug 1443
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local SLAB_SETTINGS=`get_inode_slab_tunables`
local CPUS=`getconf _NPROCESSORS_ONLN`
# we cannot set limit below 1 which means 1 inode in each
}
test_77a() { # bug 10889
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$GSS && skip "could not run with gss" && return
[ ! -f $F77_TMP ] && setup_f77
set_checksums 1
run_test 77a "normal checksum read/write operation ============="
test_77b() { # bug 10889
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$GSS && skip "could not run with gss" && return
[ ! -f $F77_TMP ] && setup_f77
#define OBD_FAIL_OSC_CHECKSUM_SEND 0x409
run_test 77b "checksum error on client write ===================="
test_77c() { # bug 10889
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$GSS && skip "could not run with gss" && return
[ ! -f $DIR/f77b ] && skip "requires 77b - skipping" && return
set_checksums 1
run_test 77c "checksum error on client read ==================="
test_77d() { # bug 10889
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$GSS && skip "could not run with gss" && return
#define OBD_FAIL_OSC_CHECKSUM_SEND 0x409
lctl set_param fail_loc=0x80000409
run_test 77d "checksum error on OST direct write ==============="
test_77e() { # bug 10889
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$GSS && skip "could not run with gss" && return
[ ! -f $DIR/f77 ] && skip "requires 77d - skipping" && return
#define OBD_FAIL_OSC_CHECKSUM_RECEIVE 0x408
run_test 77e "checksum error on OST direct read ================"
test_77f() { # bug 10889
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$GSS && skip "could not run with gss" && return
set_checksums 1
for algo in $CKSUM_TYPES; do
run_test 77f "repeat checksum error on write (expect error) ===="
test_77g() { # bug 10889
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$GSS && skip "could not run with gss" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
run_test 77g "checksum error on OST write ======================"
test_77h() { # bug 10889
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$GSS && skip "could not run with gss" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
run_test 77h "checksum error on OST read ======================="
test_77i() { # bug 13805
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$GSS && skip "could not run with gss" && return
#define OBD_FAIL_OSC_CONNECT_CKSUM 0x40b
lctl set_param fail_loc=0x40b
run_test 77i "client not supporting OSD_CONNECT_CKSUM =========="
test_77j() { # bug 13805
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$GSS && skip "could not run with gss" && return
#define OBD_FAIL_OSC_CKSUM_ADLER_ONLY 0x40c
lctl set_param fail_loc=0x40c
unset F77_TMP
test_78() { # bug 10901
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost || { skip_env "local OST" && return; }
NSEQ=5
run_test 78 "handle large O_DIRECT writes correctly ============"
test_79() { # bug 12743
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
wait_delete_completed
BKTOTAL=$(calc_osc_kbytes kbytestotal)
run_test 79 "df report consistency check ======================="
test_80() { # bug 10718
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
# relax strong synchronous semantics for slow backends like ZFS
local soc="obdfilter.*.sync_on_lock_cancel"
local soc_old=$(do_facet ost1 lctl get_param -n $soc | head -n1)
run_test 80 "Page eviction is equally fast at high offsets too ===="
test_81a() { # LU-456
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
# define OBD_FAIL_OST_MAPBLK_ENOSPC 0x228
# MUST OR with the OBD_FAIL_ONCE (0x80000000)
run_test 81a "OST should retry write when get -ENOSPC ==============="
test_81b() { # LU-456
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
# define OBD_FAIL_OST_MAPBLK_ENOSPC 0x228
# Don't OR with the OBD_FAIL_ONCE (0x80000000)
run_test 99f "cvs commit ======================================="
test_100() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ "$NETTYPE" = tcp ] || \
{ skip "TCP secure port test, not useful for NETTYPE=$NETTYPE" && \
return ; }
done
}
-export CACHE_MAX=`$LCTL get_param -n llite.*.max_cached_mb | head -n 1`
+export CACHE_MAX=$($LCTL get_param -n llite.*.max_cached_mb |
+ awk '/^max_cached_mb/ { print $2 }')
+
cleanup_101a() {
$LCTL set_param -n llite.*.max_cached_mb $CACHE_MAX
trap 0
}
test_101a() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local s
local discard
local nreads=10000
STRIPE_OFFSET=0
local list=$(comma_list $(osts_nodes))
- do_nodes $list $LCTL set_param -n obdfilter.*.read_cache_enable=0
- do_nodes $list $LCTL set_param -n obdfilter.*.writethrough_cache_enable=0
+ set_osd_param $list '' read_cache_enable 0
+ set_osd_param $list '' writethrough_cache_enable 0
trap cleanup_test101bc EXIT
# prepare the read-ahead file
rm -f $DIR/$tfile
local list=$(comma_list $(osts_nodes))
- do_nodes $list $LCTL set_param -n obdfilter.*.read_cache_enable=1
- do_nodes $list $LCTL set_param -n obdfilter.*.writethrough_cache_enable=1
+ set_osd_param $list '' read_cache_enable 1
+ set_osd_param $list '' writethrough_cache_enable 1
}
calc_total() {
}
test_101b() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ "$OSTCOUNT" -lt "2" ] && skip_env "skipping stride IO stride-ahead test" && return
local STRIPE_SIZE=1048576
local STRIDE_SIZE=$((STRIPE_SIZE*OSTCOUNT))
run_test 101b "check stride-io mode read-ahead ================="
test_101c() {
- local STRIPE_SIZE=1048576
- local FILE_LENGTH=$((STRIPE_SIZE*100))
- local nreads=10000
- local osc
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ local STRIPE_SIZE=1048576
+ local FILE_LENGTH=$((STRIPE_SIZE*100))
+ local nreads=10000
+ local osc
setup_test101bc
}
test_101d() {
- local file=$DIR/$tfile
- local size=${FILESIZE_101c:-500}
- local ra_MB=${READAHEAD_MB:-40}
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ local file=$DIR/$tfile
+ local size=${FILESIZE_101c:-500}
+ local ra_MB=${READAHEAD_MB:-40}
local space=$(df -P $DIR | tail -n 1 | awk '{ print $4 }')
[ $space -gt $((size * 1024)) ] ||
run_test 101d "file read with and without read-ahead enabled ================="
test_101e() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local file=$DIR/$tfile
local size=500 #KB
local count=100
}
test_101f() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local file=$DIR/$tfile
local nreads=1000
}
test_102d() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
# b10930: tar test for trusted.lov xattr
TAR=$(find_lustre_tar)
[ -z "$TAR" ] && skip_env "lustre-aware tar is not installed" && return
run_test 102d "tar restore stripe info from tarfile,not keep osts ==========="
test_102f() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
# b10930: tar test for trusted.lov xattr
TAR=$(find_lustre_tar)
[ -z "$TAR" ] && skip_env "lustre-aware tar is not installed" && return
run_test 102i "lgetxattr test on symbolic link ============"
test_102j() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
TAR=$(find_lustre_tar)
[ -z "$TAR" ] && skip_env "lustre-aware tar is not installed" && return
[ "$OSTCOUNT" -lt "2" ] && skip_env "skipping N-stripe test" && return
rm -f make-tree
echo "LU-974 ignore umask when acl is enabled..."
- mkdir $DIR/974
- cd $DIR/974
run_acl_subtest 974 || error "LU-974 test failed"
- rm -rf $DIR/974
+
+ echo "LU-2561 newly created file is same size as directory..."
+ run_acl_subtest 2561 || error "LU-2561 test failed"
cd $SAVE_PWD
umask $SAVE_UMASK
run_test 103 "acl test ========================================="
test_104a() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
touch $DIR/$tfile
lfs df || error "lfs df failed"
lfs df -ih || error "lfs df -ih failed"
run_test 104a "lfs df [-ih] [path] test ========================="
test_104b() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ $RUNAS_ID -eq $UID ] && skip_env "RUNAS_ID = UID = $UID -- skipping" && return
chmod 666 /dev/obd
denied_cnt=$((`$RUNAS $LFS check servers 2>&1 | grep "Permission denied" | wc -l`))
test_105a() {
# doesn't work on 2.4 kernels
- touch $DIR/$tfile
- if [ -n "`mount | grep \"$DIR.*flock\" | grep -v noflock`" ];
- then
- flocks_test 1 on -f $DIR/$tfile || error "fail flock on"
- else
- flocks_test 1 off -f $DIR/$tfile || error "fail flock off"
- fi
+ touch $DIR/$tfile
+ if [ -n "`mount | grep \"$MOUNT.*flock\" | grep -v noflock`" ]; then
+ flocks_test 1 on -f $DIR/$tfile || error "fail flock on"
+ else
+ flocks_test 1 off -f $DIR/$tfile || error "fail flock off"
+ fi
rm -f $DIR/$tfile
}
run_test 105a "flock when mounted without -o flock test ========"
test_105b() {
- touch $DIR/$tfile
- if [ -n "`mount | grep \"$DIR.*flock\" | grep -v noflock`" ];
- then
- flocks_test 1 on -c $DIR/$tfile || error "fail flock on"
- else
- flocks_test 1 off -c $DIR/$tfile || error "fail flock off"
- fi
+ touch $DIR/$tfile
+ if [ -n "`mount | grep \"$MOUNT.*flock\" | grep -v noflock`" ]; then
+ flocks_test 1 on -c $DIR/$tfile || error "fail flock on"
+ else
+ flocks_test 1 off -c $DIR/$tfile || error "fail flock off"
+ fi
rm -f $DIR/$tfile
}
run_test 105b "fcntl when mounted without -o flock test ========"
test_105c() {
- touch $DIR/$tfile
- if [ -n "`mount | grep \"$DIR.*flock\" | grep -v noflock`" ];
- then
- flocks_test 1 on -l $DIR/$tfile || error "fail flock on"
- else
- flocks_test 1 off -l $DIR/$tfile || error "fail flock off"
- fi
+ touch $DIR/$tfile
+ if [ -n "`mount | grep \"$MOUNT.*flock\" | grep -v noflock`" ]; then
+ flocks_test 1 on -l $DIR/$tfile || error "fail flock on"
+ else
+ flocks_test 1 off -l $DIR/$tfile || error "fail flock off"
+ fi
rm -f $DIR/$tfile
}
run_test 105c "lockf when mounted without -o flock test ========"
test_105d() { # bug 15924
- test_mkdir -p $DIR/$tdir
- [ -z "`mount | grep \"$DIR.*flock\" | grep -v noflock`" ] && \
- skip "mount w/o flock enabled" && return
- #define OBD_FAIL_LDLM_CP_CB_WAIT 0x315
- $LCTL set_param fail_loc=0x80000315
- flocks_test 2 $DIR/$tdir
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ test_mkdir -p $DIR/$tdir
+ [ -z "`mount | grep \"$MOUNT.*flock\" | grep -v noflock`" ] && \
+ skip "mount w/o flock enabled" && return
+ #define OBD_FAIL_LDLM_CP_CB_WAIT 0x315
+ $LCTL set_param fail_loc=0x80000315
+ flocks_test 2 $DIR/$tdir
}
run_test 105d "flock race (should not freeze) ========"
test_105e() { # bug 22660 && 22040
- [ -z "`mount | grep \"$DIR.*flock\" | grep -v noflock`" ] && \
+ [ -z "`mount | grep \"$MOUNT.*flock\" | grep -v noflock`" ] && \
skip "mount w/o flock enabled" && return
touch $DIR/$tfile
flocks_test 3 $DIR/$tfile
run_test 106 "attempt exec of dir followed by chown of that dir"
test_107() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
CDIR=`pwd`
cd $DIR
run_test 110 "filename length checking"
test_115() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
OSTIO_pre=$(ps -e|grep ll_ost_io|awk '{print $4}'|sort -n|tail -1|\
cut -c11-20)
[ -z "$OSTIO_pre" ] && skip "no OSS threads" && \
}
test_116a() { # was previously test_116()
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ "$OSTCOUNT" -lt "2" ] && skip_env "$OSTCOUNT < 2 OSTs" && return
echo -n "Free space priority "
run_test 116a "stripe QOS: free space balance ==================="
test_116b() { # LU-2093
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
#define OBD_FAIL_MDS_OSC_CREATE_FAIL 0x147
local old_rr
old_rr=$(do_facet $SINGLEMDS lctl get_param -n lov.*mdtlov*.qos_threshold_rr)
test_117() # bug 10891
{
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
dd if=/dev/zero of=$DIR/$tfile bs=1M count=1
#define OBD_FAIL_OST_SETATTR_CREDITS 0x21e
lctl set_param fail_loc=0x21e
test_118a() #bug 11710
{
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
reset_async
$MULTIOP $DIR/$tfile oO_CREAT:O_RDWR:O_SYNC:w4096c
test_118b()
{
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_async
test_118c()
{
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_async
test_118d()
{
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_async
run_test 118d "Fsync validation inject a delay of the bulk =========="
test_118f() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
reset_async
#define OBD_FAIL_OSC_BRW_PREP_REQ2 0x40a
run_test 118f "Simulate unrecoverable OSC side error =========="
test_118g() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
reset_async
#define OBD_FAIL_OSC_BRW_PREP_REQ 0x406
run_test 118g "Don't stay in wait if we got local -ENOMEM =========="
test_118h() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_async
[ "$SLOW" = "no" ] && [ -n "$OLD_RESENDCOUNT" ] && set_resend_count $OLD_RESENDCOUNT
test_118i() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_async
[ "$SLOW" = "no" ] && set_resend_count 4
test_118j() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_async
test_118k()
{
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OSTs with nodsh" && return
#define OBD_FAIL_OST_BRW_WRITE_BULK 0x20e
test_118l()
{
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
# LU-646
test_mkdir -p $DIR/$tdir
$MULTIOP $DIR/$tdir Dy || error "fsync dir failed"
test_119d() # bug 15950
{
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
MAX_RPCS_IN_FLIGHT=`$LCTL get_param -n osc.*OST0000-osc-[^mM]*.max_rpcs_in_flight`
$LCTL set_param -n osc.*OST0000-osc-[^mM]*.max_rpcs_in_flight 1
BSIZE=1048576
run_test 119d "The DIO path should try to send a new rpc once one is completed"
test_120a() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
run_test 120a "Early Lock Cancel: mkdir test"
test_120b() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
run_test 120b "Early Lock Cancel: create test"
test_120c() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
run_test 120c "Early Lock Cancel: link test"
test_120d() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
run_test 120d "Early Lock Cancel: setattr test"
test_120e() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
run_test 120e "Early Lock Cancel: unlink test"
test_120f() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
test_mkdir -p $DIR/$tdir
run_test 120f "Early Lock Cancel: rename test"
test_120g() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
lru_resize_disable mdc
run_test 120g "Early Lock Cancel: performance test"
test_121() { #bug #10589
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
rm -rf $DIR/$tfile
writes=$(LANG=C dd if=/dev/zero of=$DIR/$tfile count=1 2>&1 | awk -F '+' '/out$/ {print $1}')
#define OBD_FAIL_LDLM_CANCEL_RACE 0x310
run_test 121 "read cancel race ========="
test_123a() { # was test 123, statahead(bug 11401)
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
SLOWOK=0
if [ -z "$(grep "processor.*: 1" /proc/cpuinfo)" ]; then
log "testing on UP system. Performance may be not as good as expected."
run_test 123a "verify statahead work"
test_123b () { # statahead(bug 15027)
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir
createmany -o $DIR/$tdir/$tfile-%d 1000
run_test 123b "not panic with network error in statahead enqueue (bug 15027)"
test_124a() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ -z "`lctl get_param -n mdc.*.connect_flags | grep lru_resize`" ] && \
skip "no lru resize on server" && return 0
local NR=2000
}
test_124b() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ -z "`lctl get_param -n mdc.*.connect_flags | grep lru_resize`" ] && \
skip "no lru resize on server" && return 0
run_test 126 "check that the fsgid provided by the client is taken into account"
test_127a() { # bug 15521
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$SETSTRIPE -i 0 -c 1 $DIR/$tfile || error "setstripe failed"
$LCTL set_param osc.*.stats=0
FSIZE=$((2048 * 1024))
run_test 127a "verify the client stats are sane"
test_127b() { # bug LU-333
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$LCTL set_param llite.*.stats=0
FSIZE=65536 # sized fixed to match PAGE_SIZE for most clients
# perform 2 reads and writes so MAX is different from SUM.
}
test_129() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
if [ "$(facet_fstype $SINGLEMDS)" != ldiskfs ]; then
skip "Only applicable to ldiskfs-based MDTs"
return
}
test_132() { #1028, SOM
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
local num=$(get_mds_dir $DIR)
local mymds=mds${num}
}
test_133a() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
run_test 133a "Verifying MDT stats ========================================"
test_133b() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
local testdir=$DIR/${tdir}/stats_testdir
run_test 133b "Verifying extra MDT stats =================================="
test_133c() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
local testdir=$DIR/${tdir}/stats_testdir
}
test_133d() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
do_facet $SINGLEMDS $LCTL list_param mdt.*.rename_stats ||
}
run_test 133d "Verifying rename_stats ========================================"
+test_133e() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ local testdir=$DIR/${tdir}/stats_testdir
+ local ctr f0 f1 bs=32768 count=42 sum
+
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
+ mkdir -p ${testdir} || error "mkdir failed"
+
+ $SETSTRIPE -c 1 -i 0 ${testdir}/${tfile}
+
+ for ctr in {write,read}_bytes; do
+ sync
+ cancel_lru_locks osc
+
+ do_facet ost1 $LCTL set_param -n \
+ "obdfilter.*.exports.clear=clear"
+
+ if [ $ctr = write_bytes ]; then
+ f0=/dev/zero
+ f1=${testdir}/${tfile}
+ else
+ f0=${testdir}/${tfile}
+ f1=/dev/null
+ fi
+
+ dd if=$f0 of=$f1 conv=notrunc bs=$bs count=$count || \
+ error "dd failed"
+ sync
+ cancel_lru_locks osc
+
+ sum=$(do_facet ost1 $LCTL get_param \
+ "obdfilter.*.exports.*.stats" | \
+ awk -v ctr=$ctr '\
+ BEGIN { sum = 0 }
+ $1 == ctr { sum += $7 }
+ END { print sum }')
+
+ if ((sum != bs * count)); then
+ error "Bad $ctr sum, expected $((bs * count)), got $sum"
+ fi
+ done
+
+ rm -rf $DIR/${tdir}
+}
+run_test 133e "Verifying OST {read,write}_bytes nid stats ================="
+
test_140() { #bug-17379
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir || error "Creating dir $DIR/$tdir"
cd $DIR/$tdir || error "Changing to $DIR/$tdir"
cp /usr/bin/stat . || error "Copying stat to $DIR/$tdir"
run_test 140 "Check reasonable stack depth (shouldn't LBUG) ===="
test_150() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local TF="$TMP/$tfile"
dd if=/dev/urandom of=$TF bs=6096 count=1 || error "dd failed"
function roc_hit() {
local list=$(comma_list $(osts_nodes))
- echo $(get_obdfilter_param $list '' stats |
+ echo $(get_osd_param $list '' stats |
awk '/'cache_hit'/ {sum+=$2} END {print sum}')
}
on=0;
fi
local list=$(comma_list $(osts_nodes))
- set_obdfilter_param $list '' $1_cache_enable $on
+ set_osd_param $list '' $1_cache_enable $on
cancel_lru_locks osc
}
test_151() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
local CPAGES=3
local list=$(comma_list $(osts_nodes))
# check whether obdfilter is cache capable at all
- if ! get_obdfilter_param $list '' read_cache_enable >/dev/null; then
+ if ! get_osd_param $list '' read_cache_enable >/dev/null; then
echo "not cache-capable obdfilter"
return 0
fi
# check cache is enabled on all obdfilters
- if get_obdfilter_param $list '' read_cache_enable | grep 0; then
+ if get_osd_param $list '' read_cache_enable | grep 0; then
echo "oss cache is disabled"
return 0
fi
- set_obdfilter_param $list '' writethrough_cache_enable 1
+ set_osd_param $list '' writethrough_cache_enable 1
# pages should be in the case right after write
dd if=/dev/urandom of=$DIR/$tfile bs=4k count=$CPAGES || error "dd failed"
# the following read invalidates the cache
cancel_lru_locks osc
- set_obdfilter_param $list '' read_cache_enable 0
+ set_osd_param $list '' read_cache_enable 0
cat $DIR/$tfile >/dev/null
# now data shouldn't be found in the cache
error "IN CACHE: before: $BEFORE, after: $AFTER"
fi
- set_obdfilter_param $list '' read_cache_enable 1
+ set_osd_param $list '' read_cache_enable 1
rm -f $DIR/$tfile
}
run_test 151 "test cache on oss and controls ==============================="
test_152() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local TF="$TMP/$tfile"
# simulate ENOMEM during write
run_test 153 "test if fdatasync does not crash ======================="
test_154() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.51) ]] ||
{ skip "Need MDS version at least 2.2.51"; return 0; }
}
test_155a() {
- set_cache read on
- set_cache writethrough on
- test_155_small_load
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ set_cache read on
+ set_cache writethrough on
+ test_155_small_load
}
run_test 155a "Verify small file correctness: read cache:on write_cache:on"
test_155b() {
- set_cache read on
- set_cache writethrough off
- test_155_small_load
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ set_cache read on
+ set_cache writethrough off
+ test_155_small_load
}
run_test 155b "Verify small file correctness: read cache:on write_cache:off"
test_155c() {
- set_cache read off
- set_cache writethrough on
- test_155_small_load
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ set_cache read off
+ set_cache writethrough on
+ test_155_small_load
}
run_test 155c "Verify small file correctness: read cache:off write_cache:on"
test_155d() {
- set_cache read off
- set_cache writethrough off
- test_155_small_load
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ set_cache read off
+ set_cache writethrough off
+ test_155_small_load
}
run_test 155d "Verify small file correctness: read cache:off write_cache:off"
test_155e() {
- set_cache read on
- set_cache writethrough on
- test_155_big_load
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ set_cache read on
+ set_cache writethrough on
+ test_155_big_load
}
run_test 155e "Verify big file correctness: read cache:on write_cache:on"
test_155f() {
- set_cache read on
- set_cache writethrough off
- test_155_big_load
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ set_cache read on
+ set_cache writethrough off
+ test_155_big_load
}
run_test 155f "Verify big file correctness: read cache:on write_cache:off"
test_155g() {
- set_cache read off
- set_cache writethrough on
- test_155_big_load
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ set_cache read off
+ set_cache writethrough on
+ test_155_big_load
}
run_test 155g "Verify big file correctness: read cache:off write_cache:on"
test_155h() {
- set_cache read off
- set_cache writethrough off
- test_155_big_load
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ set_cache read off
+ set_cache writethrough off
+ test_155_big_load
}
run_test 155h "Verify big file correctness: read cache:off write_cache:off"
test_156() {
- local CPAGES=3
- local BEFORE
- local AFTER
- local file="$DIR/$tfile"
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ local CPAGES=3
+ local BEFORE
+ local AFTER
+ local file="$DIR/$tfile"
[ "$(facet_fstype ost1)" = "zfs" ] &&
skip "LU-1956/LU-2261: stats unimplemented on OSD ZFS" &&
}
test_160() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.0) ] ||
{ skip "Need MDS version at least 2.2.0"; return; }
run_test 160 "changelog sanity"
test_161() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir
cp /etc/hosts $DIR/$tdir/$tfile
test_mkdir $DIR/$tdir/foo1
test_162() {
# Make changes to filesystem
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p $DIR/$tdir/d2
touch $DIR/$tdir/d2/$tfile
touch $DIR/$tdir/d2/x1
run_test 162 "path lookup sanity"
test_163() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
copytool --test $FSNAME || { skip "copytool not runnable: $?" && return; }
copytool $FSNAME &
run_test 169 "parallel read and truncate should not deadlock"
test_170() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$LCTL clear # bug 18514
$LCTL debug_daemon start $TMP/${tfile}_log_good
touch $DIR/$tfile
run_test 170 "test lctl df to handle corrupted log ====================="
test_171() { # bug20592
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
#define OBD_FAIL_PTLRPC_DUMP_LOG 0x50e
$LCTL set_param fail_loc=0x50e
$LCTL set_param fail_val=3000
}
test_180a() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
local rc=0
local rmmod_local=0
run_test 180a "test obdecho on osc"
test_180b() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
local rc=0
local rmmod_remote=0
run_test 181 "Test open-unlinked dir ========================"
test_182() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
# disable MDC RPC lock wouldn't crash client
local fcount=1000
local tcount=4
run_test 182 "Disable MDC RPCs semaphore wouldn't crash client ================"
test_183() { # LU-2275
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
mkdir -p $DIR/$tdir || error "creating dir $DIR/$tdir"
echo aaa > $DIR/$tdir/$tfile
}
run_test 183 "No crash or request leak in case of strange dispositions ========"
+test_185() { # LU-2441
+ mkdir -p $DIR/$tdir || error "creating dir $DIR/$tdir"
+ touch $DIR/$tdir/spoo
+ local mtime1=$(stat -c "%Y" $DIR/$tdir)
+ local fid=$($MULTIOP $DIR/$tdir VFw4096c) ||
+ error "cannot create/write a volatile file"
+ $CHECKSTAT -t file $MOUNT/.lustre/fid/$fid 2>/dev/null &&
+ error "FID is still valid after close"
+
+ multiop_bg_pause $DIR/$tdir vVw4096_c
+ local multi_pid=$!
+
+ local OLD_IFS=$IFS
+ IFS=":"
+ local fidv=($fid)
+ IFS=$OLD_IFS
+ # assume that the next FID for this client is sequential, since stdout
+ # is unfortunately eaten by multiop_bg_pause
+ local n=$((${fidv[1]} + 1))
+ local next_fid="${fidv[0]}:$(printf "0x%x" $n):${fidv[2]}"
+ $CHECKSTAT -t file $MOUNT/.lustre/fid/$next_fid ||
+ error "FID is missing before close"
+ kill -USR1 $multi_pid
+ # 1 second delay, so if mtime change we will see it
+ sleep 1
+ local mtime2=$(stat -c "%Y" $DIR/$tdir)
+ [[ $mtime1 == $mtime2 ]] || error "mtime has changed"
+}
+run_test 185 "Volatile file support"
+
# OST pools tests
check_file_in_pool()
{
}
test_200() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mgs_nodsh && skip "remote MGS with nodsh" && return
local POOL=${POOL:-cea1}
}
test_205() { # Job stats
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ -z "$(lctl get_param -n mdc.*.connect_flags | grep jobstats)" ] &&
skip "Server doesn't support jobstats" && return 0
}
run_test 206 "fail lov_init_raid0() doesn't lbug"
+test_207a() {
+ dd if=/dev/zero of=$DIR/$tfile bs=4k count=$((RANDOM%10+1))
+ local fsz=`stat -c %s $DIR/$tfile`
+ cancel_lru_locks mdc
+
+ # do not return layout in getattr intent
+#define OBD_FAIL_MDS_NO_LL_GETATTR 0x170
+ $LCTL set_param fail_loc=0x170
+ local sz=`stat -c %s $DIR/$tfile`
+
+ [ $fsz -eq $sz ] || error "file size expected $fsz, actual $sz"
+
+ rm -rf $DIR/$tfile
+}
+run_test 207a "can refresh layout at glimpse"
+
+test_207b() {
+ dd if=/dev/zero of=$DIR/$tfile bs=4k count=$((RANDOM%10+1))
+ local cksum=`md5sum $DIR/$tfile`
+ local fsz=`stat -c %s $DIR/$tfile`
+ cancel_lru_locks mdc
+ cancel_lru_locks osc
+
+ # do not return layout in getattr intent
+#define OBD_FAIL_MDS_NO_LL_OPEN 0x171
+ $LCTL set_param fail_loc=0x171
+
+ # it will refresh layout after the file is opened but before read issues
+ echo checksum is "$cksum"
+ echo "$cksum" |md5sum -c --quiet || error "file differs"
+
+ rm -rf $DIR/$tfile
+}
+run_test 207b "can refresh layout at open"
+
test_212() {
size=`date +%s`
size=$((size % 8192 + 1))
}
test_215() { # for bugs 18102, 21079, 21517
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local N='(0|[1-9][0-9]*)' # non-negative numeric
local P='[1-9][0-9]*' # positive numeric
local I='(0|-?[1-9][0-9]*|NA)' # any numeric (0 | >0 | <0) or NA if no value
run_test 215 "/proc/sys/lnet exists and has proper content - bugs 18102, 21079, 21517"
test_216() { # bug 20317
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
local node
local p="$TMP/sanityN-$TESTNAME.parameters"
run_test 216 "check lockless direct write works and updates file size and kms correctly"
test_217() { # bug 22430
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local node
local nid
run_test 218 "parallel read and truncate should not deadlock ======================="
test_219() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
# write one partial page
dd if=/dev/zero of=$DIR/$tfile bs=1024 count=1
# set no grant so vvp_io_commit_write will do sync write
run_test 219 "LU-394: Write partial won't cause uncontiguous pages vec at LND"
test_220() { #LU-325
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
local OSTIDX=0
run_test 220 "preallocated MDS objects still used if ENOSPC from OST"
test_221() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
dd if=`which date` of=$MOUNT/date oflag=sync
chmod +x $MOUNT/date
run_test 221 "make sure fault and truncate race to not cause OOM"
test_222a () {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
rm -rf $DIR/$tdir
test_mkdir -p $DIR/$tdir
$SETSTRIPE -c 1 -i 0 $DIR/$tdir
run_test 222a "AGL for ls should not trigger CLIO lock failure ================"
test_222b () {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
rm -rf $DIR/$tdir
test_mkdir -p $DIR/$tdir
$SETSTRIPE -c 1 -i 0 $DIR/$tdir
run_test 222b "AGL for rmdir should not trigger CLIO lock failure ============="
test_223 () {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
rm -rf $DIR/$tdir
test_mkdir -p $DIR/$tdir
$SETSTRIPE -c 1 -i 0 $DIR/$tdir
run_test 223 "osc reenqueue if without AGL lock granted ======================="
test_224a() { # LU-1039, MRP-303
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
#define OBD_FAIL_PTLRPC_CLIENT_BULK_CB 0x508
$LCTL set_param fail_loc=0x508
dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1 conv=fsync
run_test 224a "Don't panic on bulk IO failure"
test_224b() { # LU-1039, MRP-303
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1
cancel_lru_locks osc
#define OBD_FAIL_PTLRPC_CLIENT_BULK_CB2 0x515
MDSSURVEY=${MDSSURVEY:-$(which mds-survey 2>/dev/null || true)}
test_225a () {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
if [ -z ${MDSSURVEY} ]; then
skip_env "mds-survey not found" && return
fi
run_test 225a "Metadata survey sanity with zero-stripe"
test_225b () {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
if [ -z ${MDSSURVEY} ]; then
skip_env "mds-survey not found" && return
fi
$MCREATE --mode=$1 --major=$2 --minor=$3 $path ||
error "cannot create $desc"
- fid=$($LFS path2fid $path)
+ fid=$($LFS path2fid $path | tr -d '[' | tr -d ']')
rc=$?
[ $rc -ne 0 ] && error "cannot get fid of a $desc"
- fid_path=$($LFS fid2path $DIR "$fid")
+ fid_path=$($LFS fid2path $MOUNT $fid)
rc=$?
[ $rc -ne 0 ] && error "cannot get path of $desc by $DIR $path $fid"
# LU-1299 Executing or running ldd on a truncated executable does not
# cause an out-of-memory condition.
test_227() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
dd if=`which date` of=$MOUNT/date bs=1k count=1
chmod +x $MOUNT/date
# LU-1512 try to reuse idle OI blocks
test_228a() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
skip "non-ldiskfs backend" && return
run_test 228a "try to reuse idle OI blocks"
test_228b() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
skip "non-ldiskfs backend" && return
#LU-1881
test_228c() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
skip "non-ldiskfs backend" && return
run_test 228c "NOT shrink the last entry in OI index node to recycle idle leaf"
test_230a() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
local MDTIDX=1
run_test 230a "Create remote directory and files under the remote directory"
test_230b() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
local MDTIDX=1
local remote_dir=$DIR/$tdir/remote_dir
+ local rc=0
mkdir -p $DIR/$tdir
$LFS mkdir -i $MDTIDX $remote_dir ||
$LFS mkdir -i 0 $remote_dir/new_dir &&
error "nested remote directory create succeed!"
+ do_facet mds$((MDTIDX + 1)) lctl set_param mdt.*.enable_remote_dir=1
+ $LFS mkdir -i 0 $remote_dir/new_dir || rc=$?
+ do_facet mds$((MDTIDX + 1)) lctl set_param mdt.*.enable_remote_dir=0
+
+ [ $rc -ne 0 ] &&
+ error "create remote directory failed after set enable_remote_dir"
+
rm -r $DIR/$tdir || error "unlink remote directory failed"
}
run_test 230b "nested remote directory should be failed"
#
test_900() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local ls
#define OBD_FAIL_MGC_PAUSE_PROCESS_LOG 0x903
$LCTL set_param fail_loc=0x903