# bug number for skipped tests: LU-2036
ALWAYS_EXCEPT=" 76 $ALWAYS_EXCEPT"
+is_sles11() # LU-4341
+{
+ if [ -r /etc/SuSE-release ]
+ then
+ local vers=$(grep VERSION /etc/SuSE-release | awk '{print $3}')
+ local patchlev=$(grep PATCHLEVEL /etc/SuSE-release |
+ awk '{ print $3 }')
+ if [ $vers -eq 11 ] && [ $patchlev -ge 3 ]; then
+ return 0
+ fi
+ fi
+ return 1
+}
+
+if is_sles11; then # LU-4341
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 170"
+fi
+
SRCDIR=$(cd $(dirname $0); echo $PWD)
export PATH=$PATH:/sbin
MEMHOG=${MEMHOG:-memhog}
DIRECTIO=${DIRECTIO:-directio}
ACCEPTOR_PORT=${ACCEPTOR_PORT:-988}
-UMOUNT=${UMOUNT:-"umount -d"}
STRIPES_PER_OBJ=-1
CHECK_GRANT=${CHECK_GRANT:-"yes"}
GRANT_CHECK_LIST=${GRANT_CHECK_LIST:-""}
. ${CONFIG:=$LUSTRE/tests/cfg/${NAME}.sh}
init_logging
-[ "$SLOW" = "no" ] && EXCEPT_SLOW="24o 24D 27m 64b 68 71 77f 78 115 124b"
+[ "$SLOW" = "no" ] && EXCEPT_SLOW="24o 24D 27m 64b 68 71 77f 78 115 124b 300o"
if [ $(facet_fstype $SINGLEMDS) = "zfs" ]; then
# bug number for skipped test: LU-4536 LU-1957 LU-2805
test_17m() {
local short_sym="0123456789"
local WDIR=$DIR/${tdir}m
- local mds_index
- local devname
- local cmd
local i
- local rc=0
remote_mds_nodsh && skip "remote MDS with nodsh" && return
[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.0) ] &&
echo "recreate the 512 symlink files with a shorter string"
for ((i = 0; i < 512; ++i)); do
# rewrite the symlink file with a shorter string
- ln -sf ${long_sym} $WDIR/long-$i
- ln -sf ${short_sym} $WDIR/short-$i
+ ln -sf ${long_sym} $WDIR/long-$i || error "long_sym failed"
+ ln -sf ${short_sym} $WDIR/short-$i || error "short_sym failed"
done
- mds_index=$($LFS getstripe -M $WDIR)
- mds_index=$((mds_index+1))
- devname=$(mdsdevname $mds_index)
- cmd="$E2FSCK -fnvd $devname"
+ local mds_index=$(($($LFS getstripe -M $WDIR) + 1))
+ local devname=$(mdsdevname $mds_index)
- echo "stop and checking mds${mds_index}: $cmd"
+ echo "stop and checking mds${mds_index}:"
# e2fsck should not return error
stop mds${mds_index}
- do_facet mds${mds_index} $cmd || rc=$?
+ run_e2fsck $(facet_active_host mds${mds_index}) $devname -n
+ rc=$?
start mds${mds_index} $devname $MDS_MOUNT_OPTS || error "start failed"
df $MOUNT > /dev/null 2>&1
- [ $rc -ne 0 ] && error "e2fsck should not report error upon "\
- "short/long symlink MDT: rc=$rc"
- return $rc
+ [ $rc -eq 0 ] ||
+ error "e2fsck detected error for short/long symlink: rc=$rc"
}
run_test 17m "run e2fsck against MDT which contains short/long symlink"
check_fs_consistency_17n() {
local mdt_index
- local devname
- local cmd
local rc=0
# create/unlink in 17n only change 2 MDTs(MDT1/MDT2),
# so it only check MDT1/MDT2 instead of all of MDTs.
- for mdt_index in $(seq 1 2); do
- devname=$(mdsdevname $mdt_index)
- cmd="$E2FSCK -fnvd $devname"
-
- echo "stop and checking mds${mdt_index}: $cmd"
+ for mdt_index in 1 2; do
+ local devname=$(mdsdevname $mdt_index)
# e2fsck should not return error
stop mds${mdt_index}
- do_facet mds${mdt_index} $cmd || rc=$?
+ run_e2fsck $(facet_active_host mds$mdt_index) $devname -n ||
+ rc=$((rc + $?))
start mds${mdt_index} $devname $MDS_MOUNT_OPTS ||
- error "mount mds${mdt_index} failed"
+ error "mount mds$mdt_index failed"
df $MOUNT > /dev/null 2>&1
- [ $rc -ne 0 ] && break
done
return $rc
}
log "want: stripe:$stripe_nr ost:$obdidx oid:$oid/$hex seq:$seq"
seq=$(echo $seq | sed -e "s/^0x//g")
- if [ $seq == 0 ]; then
+ if [ $seq == 0 ] || [ $(facet_fstype ost$ost) == zfs ]; then
oid_hex=$(echo $oid)
else
oid_hex=$(echo $hex | sed -e "s/^0x//g")
$(facet_mntpt ost$ost)/$obj_file)
unmount_fstype ost$ost
start ost$ost $dev $OST_MOUNT_OPTS
+ clients_up
fi
[ -z "$ff" ] && error "$obj_file: no filter_fid info"
cleanup_test32_mount() {
trap 0
- $UMOUNT -d $DIR/$tdir/ext2-mountpoint
+ $UMOUNT $DIR/$tdir/ext2-mountpoint
}
test_32a() {
cleanup_testdir_mount() {
trap 0
- $UMOUNT -d $DIR/$tdir
+ $UMOUNT $DIR/$tdir
}
test_32q() {
error "create" || true
$RUNAS $OPENFILE -f O_RDWR:O_CREAT -m 0444 $remote_dir/f33 &&
error "open RDWR" || true
- $RUNAS $OPENFILE -f 1286739555 $remote_dir/f33 &&
- error "create" || true
+ $RUNAS $OPENFILE -f 1286739555 $remote_dir/f33 || true
}
run_test 33d "openfile with 444 modes and malformed flags under remote dir"
loopdev="$DIR/loop54c"
trap 0
- $UMOUNT -d $DIR/$tdir || rc=$?
+ $UMOUNT $DIR/$tdir || rc=$?
losetup -d $loopdev || true
losetup -d $LOOPDEV || true
rm -rf $loopdev $DIR/$tfile $DIR/$tdir
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mgs_nodsh && skip "remote MGS with nodsh" && return
do_facet mgs "! which run-llog.sh &> /dev/null" &&
- skip_env "missing subtest run-llog.sh" && return
+ do_facet mgs "! ls run-llog.sh &> /dev/null" &&
+ skip_env "missing subtest run-llog.sh" && return
+
log "$TEST60_HEAD - from kernel mode"
+ do_facet mgs "$LCTL set_param debug=warning; $LCTL dk > /dev/null"
do_facet mgs sh run-llog.sh
+ do_facet mgs $LCTL dk > $TMP/$tfile
+
+ # LU-6388: test llog_reader
+ local llog_reader=$(do_facet mgs "which llog_reader 2> /dev/null")
+ llog_reader=${llog_reader:-$LUSTRE/utils/llog_reader}
+ [ -z $(do_facet mgs ls -d $llog_reader 2> /dev/null) ] &&
+ skip_env "missing llog_reader" && return
+ local fstype=$(facet_fstype mgs)
+ [ $fstype != ldiskfs -a $fstype != zfs ] &&
+ skip_env "Only for ldiskfs or zfs type mgs" && return
+
+ local mntpt=$(facet_mntpt mgs)
+ local mgsdev=$(mgsdevname 1)
+ local fid_list
+ local fid
+ local rec_list
+ local rec
+ local rec_type
+ local obj_file
+ local path
+ local seq
+ local oid
+ local pass=true
+
+ #get fid and record list
+ fid_list=($(awk '/9_sub.*record/ { print $NF }' /$TMP/$tfile |
+ tail -n 4))
+ rec_list=($(awk '/9_sub.*record/ { print $((NF-3)) }' /$TMP/$tfile |
+ tail -n 4))
+ #remount mgs as ldiskfs or zfs type
+ stop mgs || error "stop mgs failed"
+ mount_fstype mgs || error "remount mgs failed"
+ for ((i = 0; i < ${#fid_list[@]}; i++)); do
+ fid=${fid_list[i]}
+ rec=${rec_list[i]}
+ seq=$(echo $fid | awk -F ':' '{ print $1 }' | sed -e "s/^0x//g")
+ oid=$(echo $fid | awk -F ':' '{ print $2 }' | sed -e "s/^0x//g")
+ oid=$((16#$oid))
+
+ case $fstype in
+ ldiskfs )
+ obj_file=$mntpt/O/$seq/d$((oid%32))/$oid ;;
+ zfs )
+ obj_file=$mntpt/oi.$(($((16#$seq))&127))/$fid ;;
+ esac
+ echo "obj_file is $obj_file"
+ do_facet mgs $llog_reader $obj_file
+
+ rec_type=$(do_facet mgs $llog_reader $obj_file | grep "type=" |
+ awk '{ print $3 }' | sed -e "s/^type=//g")
+ if [ $rec_type != $rec ]; then
+ echo "FAILED test_60a wrong record type $rec_type," \
+ "should be $rec"
+ pass=false
+ break
+ fi
+
+ #check obj path if record type is LLOG_LOGID_MAGIC
+ if [ "$rec" == "1064553b" ]; then
+ path=$(do_facet mgs $llog_reader $obj_file |
+ grep "path=" | awk '{ print $NF }' |
+ sed -e "s/^path=//g")
+ if [ $obj_file != $mntpt/$path ]; then
+ echo "FAILED test_60a wrong obj path" \
+ "$montpt/$path, should be $obj_file"
+ pass=false
+ break
+ fi
+ fi
+ done
+ rm -f $TMP/$tfile
+ #restart mgs before "error", otherwise it will block the next test
+ stop mgs || error "stop mgs failed"
+ start mgs $(mgsdevname) $MGS_MOUNT_OPTS || error "start mgs failed"
+ $pass || error "test failed, see FAILED test_60a messages for specifics"
}
-run_test 60a "llog sanity tests run from kernel module =========="
+run_test 60a "llog_test run from kernel module and test llog_reader =========="
test_60b() { # bug 6411
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
}
run_test 60d "test printk console message masking"
+test_60e() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ touch $DIR/$tfile
+#define OBD_FAIL_MDS_LLOG_CREATE_FAILED2 0x15b
+ do_facet mds1 lctl set_param fail_loc=0x15b
+ rm $DIR/$tfile
+}
+run_test 60e "no space while new llog is being created"
+
test_61() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
f="$DIR/f61"
run_test 68b "support swapping to Lustre ========================"
# bug5265, obdfilter oa2dentry return -ENOENT
-# #define OBD_FAIL_OST_ENOENT 0x217
+# #define OBD_FAIL_SRV_ENOENT 0x217
test_69() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
local xsize=${1:-1024} # in bytes
local file=$DIR/$tfile
- [ -z $(lctl get_param -n mdc.*.connect_flags | grep xattr) ] &&
+ [ -z "$(lctl get_param -n mdc.*.connect_flags | grep xattr)" ] &&
skip "must have user_xattr" && return 0
[ -z "$(which setfattr 2>/dev/null)" ] &&
skip_env "could not find setfattr" && return 0
test_116a() { # was previously test_116()
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+
[[ $OSTCOUNT -lt 2 ]] && skip_env "$OSTCOUNT < 2 OSTs" && return
echo -n "Free space priority "
test_116b() { # LU-2093
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+
#define OBD_FAIL_MDS_OSC_CREATE_FAIL 0x147
local old_rr=$(do_facet $SINGLEMDS lctl get_param -n \
lo*.$FSNAME-MDT0000-mdtlov.qos_threshold_rr | head -1)
reset_async
- #define OBD_FAIL_OST_ENOENT 0x217
+ #define OBD_FAIL_SRV_ENOENT 0x217
set_nodes_failloc "$(osts_nodes)" 0x217
$MULTIOP $DIR/$tfile oO_CREAT:O_RDWR:O_SYNC:w4096c
RC=$?
do_facet $facet "test -e $LDPROC/$canondev/max_dir_size" ||
LDPROC=/sys/fs/ldiskfs
do_facet $facet "echo $1 >$LDPROC/$canondev/max_dir_size"
+ do_facet $facet "test -e $LDPROC/$canondev/warning_dir_size" ||
+ LDPROC=/sys/fs/ldiskfs
+ do_facet $facet "echo $2 >$LDPROC/$canondev/warning_dir_size"
+ done
+}
+
+check_mds_dmesg() {
+ local facets=$(get_facets MDS)
+ for facet in ${facets//,/ }; do
+ do_facet $facet "dmesg | tail -3 | grep -q $1" && return 0
done
+ return 1
}
test_129() {
remote_mds_nodsh && skip "remote MDS with nodsh" && return
ENOSPC=28
EFBIG=27
+ has_warning=0
rm -rf $DIR/$tdir
test_mkdir -p $DIR/$tdir
# block size of mds1
local MDT_DEV=$(mdsdevname ${SINGLEMDS//mds/})
local MDSBLOCKSIZE=$($LCTL get_param -n mdc.*MDT0000*.blocksize)
- local MAX=$((MDSBLOCKSIZE * 3))
- set_dir_limits $MAX
+ local MAX=$((MDSBLOCKSIZE * 5))
+ set_dir_limits $MAX $MAX
local I=$(stat -c%s "$DIR/$tdir")
local J=0
local STRIPE_COUNT=1
while [[ $I -le $MAX ]]; do
$MULTIOP $DIR/$tdir/$J Oc
rc=$?
+ if [ $has_warning -eq 0 ]; then
+ check_mds_dmesg '"is approaching"' &&
+ has_warning=1
+ fi
#check two errors ENOSPC for new version of ext4 max_dir_size patch
#mainline kernel commit df981d03eeff7971ac7e6ff37000bfa702327ef1
#and EFBIG for previous versions
if [ $rc -eq $EFBIG -o $rc -eq $ENOSPC ]; then
- set_dir_limits 0
+ set_dir_limits 0 0
echo "return code $rc received as expected"
multiop $DIR/$tdir/$J Oc ||
error_exit "multiop failed w/o dir size limit"
+ check_mds_dmesg '"has reached"' ||
+ error_exit "has reached message should be output"
+
+ [ $has_warning ] ||
+ error_exit "warning message should be output"
+
I=$(stat -c%s "$DIR/$tdir")
if [ $(lustre_version_code $SINGLEMDS) -lt \
fi
error_exit "current dir size $I, previous limit $MAX"
elif [ $rc -ne 0 ]; then
- set_dir_limits 0
+ set_dir_limits 0 0
error_exit "return code $rc received instead of expected " \
"$EFBIG or $ENOSPC, files in dir $I"
fi
I=$(stat -c%s "$DIR/$tdir")
done
- set_dir_limits 0
+ set_dir_limits 0 0
error "exceeded dir size limit $MAX($MDSCOUNT) : $I bytes"
}
run_test 129 "test directory size limit ========================"
rm $DIR/$tdir/m
unlinkmany $DIR/$tdir/f $nr
}
-run_test 134a "Server reclaims locks when reaching low watermark"
+run_test 134a "Server reclaims locks when reaching lock_reclaim_threshold"
test_134b() {
[[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.54) ]] &&
mkdir -p $DIR/$tdir || error "failed to create $DIR/$tdir"
cancel_lru_locks mdc
- local low_wm=$(do_facet mds1 $LCTL get_param -n ldlm.watermark_mb_low)
+ local low_wm=$(do_facet mds1 $LCTL get_param -n \
+ ldlm.lock_reclaim_threshold_mb)
# disable reclaim temporarily
- do_facet mds1 $LCTL set_param ldlm.watermark_mb_low=0
+ do_facet mds1 $LCTL set_param ldlm.lock_reclaim_threshold_mb=0
#define OBD_FAIL_LDLM_WATERMARK_HIGH 0x328
do_facet mds1 $LCTL set_param fail_loc=0x328
if ! ps -p $create_pid > /dev/null 2>&1; then
do_facet mds1 $LCTL set_param fail_loc=0
do_facet mds1 $LCTL set_param fail_val=0
- do_facet mds1 $LCTL set_param ldlm.watermark_mb_low=$low_wm
+ do_facet mds1 $LCTL set_param \
+ ldlm.lock_reclaim_threshold_mb=${low_wm}m
error "createmany finished incorrectly!"
fi
do_facet mds1 $LCTL set_param fail_loc=0
do_facet mds1 $LCTL set_param fail_val=0
- do_facet mds1 $LCTL set_param ldlm.watermark_mb_low=$low_wm
+ do_facet mds1 $LCTL set_param ldlm.lock_reclaim_threshold_mb=${low_wm}m
wait $create_pid || return 1
unlinkmany $DIR/$tdir/f $nr
}
-run_test 134b "Server rejects lock request when reaching high watermark"
+run_test 134b "Server rejects lock request when reaching lock_limit_mb"
test_140() { #bug-17379
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
local AFTER
local file="$DIR/$tfile"
- [ "$(facet_fstype ost1)" = "zfs" ] &&
- skip "LU-1956/LU-2261: stats unimplemented on OSD ZFS" &&
+ [ "$(facet_fstype ost1)" = "zfs" -a \
+ $(lustre_version_code ost1 -lt $(version_code 2.6.93)) ] &&
+ skip "LU-1956/LU-2261: stats not implemented on OSD ZFS" &&
return
roc_hit_init
- log "Turn on read and write cache"
- set_cache read on
- set_cache writethrough on
-
- log "Write data and read it back."
- log "Read should be satisfied from the cache."
- dd if=/dev/urandom of=$file bs=4k count=$CPAGES || error "dd failed"
- BEFORE=`roc_hit`
- cancel_lru_locks osc
- cat $file >/dev/null
- AFTER=`roc_hit`
- if ! let "AFTER - BEFORE == CPAGES"; then
- error "NOT IN CACHE: before: $BEFORE, after: $AFTER"
- else
- log "cache hits:: before: $BEFORE, after: $AFTER"
- fi
-
- log "Read again; it should be satisfied from the cache."
- BEFORE=$AFTER
- cancel_lru_locks osc
- cat $file >/dev/null
- AFTER=`roc_hit`
- if ! let "AFTER - BEFORE == CPAGES"; then
- error "NOT IN CACHE: before: $BEFORE, after: $AFTER"
- else
- log "cache hits:: before: $BEFORE, after: $AFTER"
- fi
+ log "Turn on read and write cache"
+ set_cache read on
+ set_cache writethrough on
+ log "Write data and read it back."
+ log "Read should be satisfied from the cache."
+ dd if=/dev/urandom of=$file bs=4k count=$CPAGES || error "dd failed"
+ BEFORE=$(roc_hit)
+ cancel_lru_locks osc
+ cat $file >/dev/null
+ AFTER=$(roc_hit)
+ if ! let "AFTER - BEFORE == CPAGES"; then
+ error "NOT IN CACHE: before: $BEFORE, after: $AFTER"
+ else
+ log "cache hits:: before: $BEFORE, after: $AFTER"
+ fi
- log "Turn off the read cache and turn on the write cache"
- set_cache read off
- set_cache writethrough on
+ log "Read again; it should be satisfied from the cache."
+ BEFORE=$AFTER
+ cancel_lru_locks osc
+ cat $file >/dev/null
+ AFTER=$(roc_hit)
+ if ! let "AFTER - BEFORE == CPAGES"; then
+ error "NOT IN CACHE: before: $BEFORE, after: $AFTER"
+ else
+ log "cache hits:: before: $BEFORE, after: $AFTER"
+ fi
- log "Read again; it should be satisfied from the cache."
- BEFORE=`roc_hit`
- cancel_lru_locks osc
- cat $file >/dev/null
- AFTER=`roc_hit`
- if ! let "AFTER - BEFORE == CPAGES"; then
- error "NOT IN CACHE: before: $BEFORE, after: $AFTER"
- else
- log "cache hits:: before: $BEFORE, after: $AFTER"
- fi
+ log "Turn off the read cache and turn on the write cache"
+ set_cache read off
+ set_cache writethrough on
- log "Read again; it should not be satisfied from the cache."
- BEFORE=$AFTER
- cancel_lru_locks osc
- cat $file >/dev/null
- AFTER=`roc_hit`
- if ! let "AFTER - BEFORE == 0"; then
- error "IN CACHE: before: $BEFORE, after: $AFTER"
- else
- log "cache hits:: before: $BEFORE, after: $AFTER"
- fi
+ log "Read again; it should be satisfied from the cache."
+ BEFORE=$(roc_hit)
+ cancel_lru_locks osc
+ cat $file >/dev/null
+ AFTER=$(roc_hit)
+ if ! let "AFTER - BEFORE == CPAGES"; then
+ error "NOT IN CACHE: before: $BEFORE, after: $AFTER"
+ else
+ log "cache hits:: before: $BEFORE, after: $AFTER"
+ fi
- log "Write data and read it back."
- log "Read should be satisfied from the cache."
- dd if=/dev/urandom of=$file bs=4k count=$CPAGES || error "dd failed"
- BEFORE=`roc_hit`
- cancel_lru_locks osc
- cat $file >/dev/null
- AFTER=`roc_hit`
- if ! let "AFTER - BEFORE == CPAGES"; then
- error "NOT IN CACHE: before: $BEFORE, after: $AFTER"
- else
- log "cache hits:: before: $BEFORE, after: $AFTER"
- fi
+ log "Read again; it should not be satisfied from the cache."
+ BEFORE=$AFTER
+ cancel_lru_locks osc
+ cat $file >/dev/null
+ AFTER=$(roc_hit)
+ if ! let "AFTER - BEFORE == 0"; then
+ error "IN CACHE: before: $BEFORE, after: $AFTER"
+ else
+ log "cache hits:: before: $BEFORE, after: $AFTER"
+ fi
- log "Read again; it should not be satisfied from the cache."
- BEFORE=$AFTER
- cancel_lru_locks osc
- cat $file >/dev/null
- AFTER=`roc_hit`
- if ! let "AFTER - BEFORE == 0"; then
- error "IN CACHE: before: $BEFORE, after: $AFTER"
- else
- log "cache hits:: before: $BEFORE, after: $AFTER"
- fi
+ log "Write data and read it back."
+ log "Read should be satisfied from the cache."
+ dd if=/dev/urandom of=$file bs=4k count=$CPAGES || error "dd failed"
+ BEFORE=$(roc_hit)
+ cancel_lru_locks osc
+ cat $file >/dev/null
+ AFTER=$(roc_hit)
+ if ! let "AFTER - BEFORE == CPAGES"; then
+ error "NOT IN CACHE: before: $BEFORE, after: $AFTER"
+ else
+ log "cache hits:: before: $BEFORE, after: $AFTER"
+ fi
+ log "Read again; it should not be satisfied from the cache."
+ BEFORE=$AFTER
+ cancel_lru_locks osc
+ cat $file >/dev/null
+ AFTER=$(roc_hit)
+ if ! let "AFTER - BEFORE == 0"; then
+ error "IN CACHE: before: $BEFORE, after: $AFTER"
+ else
+ log "cache hits:: before: $BEFORE, after: $AFTER"
+ fi
- log "Turn off read and write cache"
- set_cache read off
- set_cache writethrough off
+ log "Turn off read and write cache"
+ set_cache read off
+ set_cache writethrough off
- log "Write data and read it back"
- log "It should not be satisfied from the cache."
- rm -f $file
- dd if=/dev/urandom of=$file bs=4k count=$CPAGES || error "dd failed"
- cancel_lru_locks osc
- BEFORE=`roc_hit`
- cat $file >/dev/null
- AFTER=`roc_hit`
+ log "Write data and read it back"
+ log "It should not be satisfied from the cache."
+ rm -f $file
+ dd if=/dev/urandom of=$file bs=4k count=$CPAGES || error "dd failed"
+ cancel_lru_locks osc
+ BEFORE=$(roc_hit)
+ cat $file >/dev/null
+ AFTER=$(roc_hit)
if ! let "AFTER - BEFORE == 0"; then
error_ignore bz20762 "IN CACHE: before: $BEFORE, after: $AFTER"
else
log "cache hits:: before: $BEFORE, after: $AFTER"
fi
- log "Turn on the read cache and turn off the write cache"
- set_cache read on
- set_cache writethrough off
+ log "Turn on the read cache and turn off the write cache"
+ set_cache read on
+ set_cache writethrough off
- log "Write data and read it back"
- log "It should not be satisfied from the cache."
- rm -f $file
- dd if=/dev/urandom of=$file bs=4k count=$CPAGES || error "dd failed"
- BEFORE=`roc_hit`
- cancel_lru_locks osc
- cat $file >/dev/null
- AFTER=`roc_hit`
+ log "Write data and read it back"
+ log "It should not be satisfied from the cache."
+ rm -f $file
+ dd if=/dev/urandom of=$file bs=4k count=$CPAGES || error "dd failed"
+ BEFORE=$(roc_hit)
+ cancel_lru_locks osc
+ cat $file >/dev/null
+ AFTER=$(roc_hit)
if ! let "AFTER - BEFORE == 0"; then
error_ignore bz20762 "IN CACHE: before: $BEFORE, after: $AFTER"
else
log "cache hits:: before: $BEFORE, after: $AFTER"
fi
- log "Read again; it should be satisfied from the cache."
- BEFORE=`roc_hit`
- cancel_lru_locks osc
- cat $file >/dev/null
- AFTER=`roc_hit`
- if ! let "AFTER - BEFORE == CPAGES"; then
- error "NOT IN CACHE: before: $BEFORE, after: $AFTER"
- else
- log "cache hits:: before: $BEFORE, after: $AFTER"
- fi
+ log "Read again; it should be satisfied from the cache."
+ BEFORE=$(roc_hit)
+ cancel_lru_locks osc
+ cat $file >/dev/null
+ AFTER=$(roc_hit)
+ if ! let "AFTER - BEFORE == CPAGES"; then
+ error "NOT IN CACHE: before: $BEFORE, after: $AFTER"
+ else
+ log "cache hits:: before: $BEFORE, after: $AFTER"
+ fi
- rm -f $file
+ rm -f $file
}
-run_test 156 "Verification of tunables ============================"
+run_test 156 "Verification of tunables"
#Changelogs
err17935 () {
run_test 160b "Verify that very long rename doesn't crash in changelog"
test_160c() {
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+
local rc=0
local server_version=$(lustre_version_code $SINGLEMDS)
}
run_test 160c "verify that changelog log catch the truncate event"
+test_160d() {
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+
+ local server_version=$(lustre_version_code mds1)
+ local CL_MASK_PARAM="mdd.$MDT0.changelog_mask"
+
+ [[ $server_version -ge $(version_code 2.7.60) ]] ||
+ { skip "Need MDS version at least 2.7.60+"; return; }
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+
+ # Registration step
+ local USER=$(do_facet mds1 $LCTL --device $MDT0 \
+ changelog_register -n)
+
+ mkdir -p $DIR/$tdir/migrate_dir
+ $LFS changelog_clear $MDT0 $USER 0
+
+ $LFS migrate -m 1 $DIR/$tdir/migrate_dir || error "migrate fails"
+ $LFS changelog $MDT0
+ MIGRATES=$($LFS changelog $MDT0 | tail -5 | grep -c "MIGRT")
+ $LFS changelog_clear $MDT0 $USER 0
+ [ $MIGRATES -eq 1 ] ||
+ error "MIGRATE changelog mask count $MIGRATES != 1"
+
+ # Deregistration step
+ do_facet mds1 $LCTL --device $MDT0 changelog_deregister $USER
+}
+run_test 160d "verify that changelog log catch the migrate event"
+
test_161a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p -c1 $DIR/$tdir
echo "fid $fid resolves to path $path (expected $expected)"
}
-test_162() {
+test_162a() { # was test_162
# Make changes to filesystem
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p -c1 $DIR/$tdir/d2
return 0
}
-run_test 162 "path lookup sanity"
+run_test 162a "path lookup sanity"
test_162b() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
run_test 185 "Volatile file support"
test_187a() {
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.0) ] &&
+ skip "Need MDS version at least 2.3.0" && return
+
local dir0=$DIR/$tdir/$testnum
mkdir -p $dir0 || error "creating dir $dir0"
run_test 187a "Test data version change"
test_187b() {
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.0) ] &&
+ skip "Need MDS version at least 2.3.0" && return
+
local dir0=$DIR/$tdir/$testnum
mkdir -p $dir0 || error "creating dir $dir0"
elif [ -n "$JOB_ID" ]; then # Sun Grid Engine
JOBENV=JOB_ID
else
- JOBENV=FAKE_JOBID
+ $LCTL list_param jobid_name > /dev/null 2>&1
+ if [ $? -eq 0 ]; then
+ JOBENV=nodelocal
+ else
+ JOBENV=FAKE_JOBID
+ fi
fi
verify_jobstats() {
FAKE_JOBID=id.$testnum.$(basename ${cmd[0]}).$RANDOM
JOBVAL=${!JOBENV}
+
+ [ "$JOBENV" = "nodelocal" ] && {
+ FAKE_JOBID=id.$testnum.$(basename ${cmd[0]}).$RANDOM
+ $LCTL set_param jobid_name=$FAKE_JOBID
+ JOBVAL=$FAKE_JOBID
+ }
+
log "Test: ${cmd[*]}"
log "Using JobID environment variable $JOBENV=$JOBVAL"
test_205() { # Job stats
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mgs_nodsh && skip "remote MGS with nodsh" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
+
[ -z "$(lctl get_param -n mdc.*.connect_flags | grep jobstats)" ] &&
skip "Server doesn't support jobstats" && return 0
[[ $JOBID_VAR = disable ]] && skip "jobstats is disabled" && return
cmd="mv -f $DIR/$tfile $DIR/$tdir.rename"
verify_jobstats "$cmd" "$SINGLEMDS"
# jobstats expiry - sleep until old stats should be expired
- local left=$((interval_new - (SECONDS - start)))
+ local left=$((interval_new + 2 - (SECONDS - start)))
[ $left -ge 0 ] && echo "sleep $left for expiry" && sleep $((left + 1))
cmd="mkdir $DIR/$tdir.expire"
verify_jobstats "$cmd" "$SINGLEMDS"
# for now as only exclusive open is supported. After generic lease
# is done, this test suite should be revised. - Jinshan
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
[[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.4.52) ]] ||
{ skip "Need MDS version at least 2.4.52"; return 0; }
- remote_mds_nodsh && skip "remote MDS with nodsh" && return
echo "==== test 1: verify get lease work"
$MULTIOP $DIR/$tfile oO_CREAT:O_RDWR:eRE+eU || error "get lease error"
test_220() { #LU-325
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost_nodsh && skip "remote OST with nodsh" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
local OSTIDX=0
- test_mkdir -p $DIR/$tdir
- local OST=$($LFS osts | grep ${OSTIDX}": " | \
- awk '{print $2}' | sed -e 's/_UUID$//')
+ # create on MDT0000 so the last_id and next_id are correct
+ mkdir $DIR/$tdir
+ local OST=$($LFS df $DIR | awk '/OST:'$OSTIDX'/ { print $1 }')
+ OST=${OST%_UUID}
# on the mdt's osc
local mdtosc_proc1=$(get_mdtosc_proc_path $SINGLEMDS $OST)
MDSSURVEY=${MDSSURVEY:-$(which mds-survey 2>/dev/null || true)}
test_225a () {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
if [ -z ${MDSSURVEY} ]; then
skip_env "mds-survey not found" && return
fi
test_225b () {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
-
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
if [ -z ${MDSSURVEY} ]; then
skip_env "mds-survey not found" && return
fi
ln -s $other_dir/$tfile $migrate_dir/${tfile}_ln_other
$LFS migrate -m $MDTIDX $migrate_dir ||
- error "migrate remote dir error"
+ error "fails on migrating remote dir to MDT1"
echo "migratate to MDT1, then checking.."
for ((i = 0; i < 10; i++)); do
#migrate back to MDT0
MDTIDX=0
+
$LFS migrate -m $MDTIDX $migrate_dir ||
- error "migrate remote dir error"
+ error "fails on migrating remote dir to MDT0"
echo "migrate back to MDT0, checking.."
for file in $(find $migrate_dir); do
test_230c() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
local MDTIDX=1
local mdt_index
local t=$(ls $migrate_dir | wc -l)
$LFS migrate --mdt-index $MDTIDX $migrate_dir &&
error "migrate should fail after 5 entries"
+
+ mkdir $migrate_dir/dir &&
+ error "mkdir succeeds under migrating directory"
+ touch $migrate_dir/file &&
+ error "touch file succeeds under migrating directory"
+
local u=$(ls $migrate_dir | wc -l)
[ "$u" == "$t" ] || error "$u != $t during migration"
}
run_test 230d "check migrate big directory"
+test_230e() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ local i
+ local j
+ local a_fid
+ local b_fid
+
+ mkdir -p $DIR/$tdir
+ mkdir $DIR/$tdir/migrate_dir
+ mkdir $DIR/$tdir/other_dir
+ touch $DIR/$tdir/migrate_dir/a
+ ln $DIR/$tdir/migrate_dir/a $DIR/$tdir/other_dir/b
+ ls $DIR/$tdir/other_dir
+
+ $LFS migrate -m 1 $DIR/$tdir/migrate_dir ||
+ error "migrate dir fails"
+
+ mdt_index=$($LFS getstripe -M $DIR/$tdir/migrate_dir)
+ [ $mdt_index == 1 ] || error "migrate_dir is not on MDT1"
+
+ mdt_index=$($LFS getstripe -M $DIR/$tdir/migrate_dir/a)
+ [ $mdt_index == 0 ] || error "a is not on MDT0"
+
+ $LFS migrate -m 1 $DIR/$tdir/other_dir ||
+ error "migrate dir fails"
+
+ mdt_index=$($LFS getstripe -M $DIR/$tdir/other_dir)
+ [ $mdt_index == 1 ] || error "other_dir is not on MDT1"
+
+ mdt_index=$($LFS getstripe -M $DIR/$tdir/migrate_dir/a)
+ [ $mdt_index == 1 ] || error "a is not on MDT1"
+
+ mdt_index=$($LFS getstripe -M $DIR/$tdir/other_dir/b)
+ [ $mdt_index == 1 ] || error "b is not on MDT1"
+
+ a_fid=$($LFS path2fid $DIR/$tdir/migrate_dir/a)
+ b_fid=$($LFS path2fid $DIR/$tdir/other_dir/b)
+
+ [ "$a_fid" = "$b_fid" ] || error "different fid after migration"
+
+ rm -rf $DIR/$tdir || error "rm dir failed after migration"
+}
+run_test 230e "migrate mulitple local link files"
+
+test_230f() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ local a_fid
+ local ln_fid
+
+ mkdir -p $DIR/$tdir
+ mkdir $DIR/$tdir/migrate_dir
+ $LFS mkdir -i1 $DIR/$tdir/other_dir
+ touch $DIR/$tdir/migrate_dir/a
+ ln $DIR/$tdir/migrate_dir/a $DIR/$tdir/other_dir/ln1
+ ln $DIR/$tdir/migrate_dir/a $DIR/$tdir/other_dir/ln2
+ ls $DIR/$tdir/other_dir
+
+ # a should be migrated to MDT1, since no other links on MDT0
+ $LFS migrate -m 1 $DIR/$tdir/migrate_dir ||
+ error "migrate dir fails"
+ mdt_index=$($LFS getstripe -M $DIR/$tdir/migrate_dir)
+ [ $mdt_index == 1 ] || error "migrate_dir is not on MDT1"
+ mdt_index=$($LFS getstripe -M $DIR/$tdir/migrate_dir/a)
+ [ $mdt_index == 1 ] || error "a is not on MDT1"
+
+ # a should stay on MDT1, because it is a mulitple link file
+ $LFS migrate -m 0 $DIR/$tdir/migrate_dir ||
+ error "migrate dir fails"
+ mdt_index=$($LFS getstripe -M $DIR/$tdir/migrate_dir/a)
+ [ $mdt_index == 1 ] || error "a is not on MDT1"
+
+ $LFS migrate -m 1 $DIR/$tdir/migrate_dir ||
+ error "migrate dir fails"
+
+ a_fid=$($LFS path2fid $DIR/$tdir/migrate_dir/a)
+ ln_fid=$($LFS path2fid $DIR/$tdir/other_dir/ln1)
+ [ "$a_fid" = "$ln_fid" ] || error "different fid after migrate to MDT1"
+
+ rm -rf $DIR/$tdir/other_dir/ln1 || error "unlink ln1 fails"
+ rm -rf $DIR/$tdir/other_dir/ln2 || error "unlink ln2 fails"
+
+ # a should be migrated to MDT0, since no other links on MDT1
+ $LFS migrate -m 0 $DIR/$tdir/migrate_dir ||
+ error "migrate dir fails"
+ mdt_index=$($LFS getstripe -M $DIR/$tdir/migrate_dir/a)
+ [ $mdt_index == 0 ] || error "a is not on MDT0"
+
+ rm -rf $DIR/$tdir || error "rm dir failed after migration"
+}
+run_test 230f "migrate mulitple remote link files"
+
+test_230g() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+
+ mkdir -p $DIR/$tdir/migrate_dir
+
+ $LFS migrate -m 1000 $DIR/$tdir/migrate_dir &&
+ error "migrating dir to non-exist MDT succeeds"
+ true
+}
+run_test 230g "migrate dir to non-exist MDT"
+
test_231a()
{
# For simplicity this test assumes that max_pages_per_rpc
}
run_test 239 "osp_sync test"
+test_239a() { #LU-5297
+ touch $DIR/$tfile
+ #define OBD_FAIL_OSP_CHECK_INVALID_REC 0x2100
+ do_facet $SINGLEMDS $LCTL set_param fail_loc=0x2100
+ chgrp $RUNAS_GID $DIR/$tfile
+ wait_delete_completed
+}
+run_test 239a "process invalid osp sync record correctly"
+
+test_239b() { #LU-5297
+ touch $DIR/$tfile1
+ #define OBD_FAIL_OSP_CHECK_ENOMEM 0x2101
+ do_facet $SINGLEMDS $LCTL set_param fail_loc=0x2101
+ chgrp $RUNAS_GID $DIR/$tfile1
+ wait_delete_completed
+ do_facet $SINGLEMDS $LCTL set_param fail_loc=0
+ touch $DIR/$tfile2
+ chgrp $RUNAS_GID $DIR/$tfile2
+ wait_delete_completed
+}
+run_test 239b "process osp sync record with ENOMEM error correctly"
+
test_240() {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
}
run_test 244 "sendfile with group lock tests"
+test_245() {
+ local flagname="multi_mod_rpcs"
+ local connect_data_name="max_mod_rpcs"
+ local out
+
+ # check if multiple modify RPCs flag is set
+ out=$($LCTL get_param mdc.$FSNAME-MDT0000-*.import |
+ grep "connect_flags:")
+ echo "$out"
+
+ echo "$out" | grep -qw $flagname
+ if [ $? -ne 0 ]; then
+ echo "connect flag $flagname is not set"
+ return
+ fi
+
+ # check if multiple modify RPCs data is set
+ out=$($LCTL get_param mdc.$FSNAME-MDT0000-*.import)
+ echo "$out"
+
+ echo "$out" | grep -qw $connect_data_name ||
+ error "import should have connect data $connect_data_name"
+}
+run_test 245 "check mdc connection flag/data: multiple modify RPCs"
+
+test_246() { # LU-7371
+ [ $(lustre_version_code ost1) -lt $(version_code 2.7.62) ] &&
+ skip "Need OST version >= 2.7.62" && return 0
+ do_facet ost1 $LCTL set_param fail_val=4095
+#define OBD_FAIL_OST_READ_SIZE 0x234
+ do_facet ost1 $LCTL set_param fail_loc=0x234
+ $LFS setstripe $DIR/$tfile -i 0 -c 1
+ dd if=/dev/zero of=$DIR/$tfile bs=4095 count=1 > /dev/null 2>&1
+ cancel_lru_locks $FSNAME-OST0000
+ dd if=$DIR/$tfile of=/dev/null bs=1048576 || error "Read failed"
+}
+run_test 246 "Read file of size 4095 should return right length"
+
test_250() {
[ "$(facet_fstype ost$(($($GETSTRIPE -i $DIR/$tfile) + 1)))" = "zfs" ] \
&& skip "no 16TB file size limit on ZFS" && return
}
run_test 251 "Handling short read and write correctly"
+test_252() {
+ local tgt
+ local dev
+ local out
+ local uuid
+ local num
+ local gen
+
+ if [ "$(facet_fstype ost1)" != "ldiskfs" -o \
+ "$(facet_fstype mds1)" != "ldiskfs" ]; then
+ skip "can only run lr_reader on ldiskfs target"
+ return
+ fi
+
+ # check lr_reader on OST0000
+ tgt=ost1
+ dev=$(facet_device $tgt)
+ out=$(do_facet $tgt $LR_READER $dev)
+ [ $? -eq 0 ] || error "$LR_READER failed on target $tgt device $dev"
+ echo "$out"
+ uuid=$(echo "$out" | grep -i uuid | awk '{ print $2 }')
+ [ "$uuid" == "$(ostuuid_from_index 0)" ] ||
+ error "Invalid uuid returned by $LR_READER on target $tgt"
+ echo -e "uuid returned by $LR_READER is '$uuid'\n"
+
+ # check lr_reader -c on MDT0000
+ tgt=mds1
+ dev=$(facet_device $tgt)
+ if ! do_facet $tgt $LR_READER -h | grep -q OPTIONS; then
+ echo "$LR_READER does not support additional options"
+ return 0
+ fi
+ out=$(do_facet $tgt $LR_READER -c $dev)
+ [ $? -eq 0 ] || error "$LR_READER failed on target $tgt device $dev"
+ echo "$out"
+ num=$(echo "$out" | grep -c "mdtlov")
+ [ "$num" -eq $((MDSCOUNT - 1)) ] ||
+ error "Invalid number of mdtlov clients returned by $LR_READER"
+ echo -e "Number of mdtlov clients returned by $LR_READER is '$num'\n"
+
+ # check lr_reader -cr on MDT0000
+ out=$(do_facet $tgt $LR_READER -cr $dev)
+ [ $? -eq 0 ] || error "$LR_READER failed on target $tgt device $dev"
+ echo "$out"
+ echo "$out" | grep -q "^reply_data:$" ||
+ error "$LR_READER should have returned 'reply_data' section"
+ num=$(echo "$out" | grep -c "client_generation")
+ echo -e "Number of reply data returned by $LR_READER is '$num'\n"
+}
+run_test 252 "check lr_reader tool"
+
+
cleanup_test_300() {
trap 0
umask $SAVE_UMASK
run_test 300d "check default stripe under striped directory"
test_300e() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ skip "Need MDS version at least 2.7.55" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
local stripe_count
run_test 300e "check rename under striped directory"
test_300f() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ skip "Need MDS version at least 2.7.55" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
local stripe_count
for dir in $(find $DIR/$tdir/$dirname/*); do
stripe_count=$($LFS getdirstripe -c $dir)
[ $stripe_count -eq $default_count ] ||
+ [ $stripe_count -eq 0 -o $default_count -eq 1 ] ||
error "stripe count $default_count != $stripe_count for $dir"
stripe_index=$($LFS getdirstripe -i $dir)
}
test_300g() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ skip "Need MDS version at least 2.7.55" && return
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
local dir
local stripe_count
run_test 300g "check default striped directory for normal directory"
test_300h() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ skip "Need MDS version at least 2.7.55" && return
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
local dir
local stripe_count
run_test 300h "check default striped directory for striped directory"
test_300i() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ skip "Need MDS version at least 2.7.55" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
local stripe_count
run_test 300j "test large update record"
test_300k() {
- [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
skip "Need MDS version at least 2.7.55" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
local stripe_count
local file
}
run_test 300k "test large striped directory"
+test_300l() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ skip "Need MDS version at least 2.7.55" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ local stripe_index
+
+ test_mkdir -p $DIR/$tdir/striped_dir
+ chown $RUNAS_ID $DIR/$tdir/striped_dir ||
+ error "chown $RUNAS_ID failed"
+ $LFS setdirstripe -i 1 -D $DIR/$tdir/striped_dir ||
+ error "set default striped dir failed"
+
+ #define OBD_FAIL_MDS_STALE_DIR_LAYOUT 0x158
+ $LCTL set_param fail_loc=0x80000158
+ $RUNAS mkdir $DIR/$tdir/striped_dir/test_dir || error "create dir fails"
+
+ stripe_index=$($LFS getdirstripe -i $DIR/$tdir/striped_dir/test_dir)
+ [ $stripe_index -eq 1 ] ||
+ error "expect 1 get $stripe_index for $dir"
+}
+run_test 300l "non-root user to create dir under striped dir with stale layout"
+
+test_300m() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ skip "Need MDS version at least 2.7.55" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ [ $MDSCOUNT -ge 2 ] && skip "Only for single MDT" && return
+
+ mkdir -p $DIR/$tdir/striped_dir
+ $LFS setdirstripe -D -c 1 $DIR/$tdir/striped_dir ||
+ error "set default stripes dir error"
+
+ mkdir $DIR/$tdir/striped_dir/a || error "mkdir a fails"
+
+ stripe_count=$($LFS getdirstripe -c $DIR/$tdir/striped_dir/a)
+ [ $stripe_count -eq 0 ] ||
+ error "expect 0 get $stripe_count for a"
+
+ $LFS setdirstripe -D -c 2 $DIR/$tdir/striped_dir ||
+ error "set default stripes dir error"
+
+ mkdir $DIR/$tdir/striped_dir/b || error "mkdir b fails"
+
+ stripe_count=$($LFS getdirstripe -c $DIR/$tdir/striped_dir/b)
+ [ $stripe_count -eq 0 ] ||
+ error "expect 0 get $stripe_count for b"
+
+ $LFS setdirstripe -D -c1 -i2 $DIR/$tdir/striped_dir ||
+ error "set default stripes dir error"
+
+ mkdir $DIR/$tdir/striped_dir/c &&
+ error "default stripe_index is invalid, mkdir c should fails"
+
+ rm -rf $DIR/$tdir || error "rmdir fails"
+}
+run_test 300m "setstriped directory on single MDT FS"
+
+cleanup_300n() {
+ local list=$(comma_list $(mdts_nodes))
+
+ trap 0
+ do_nodes $list $LCTL set_param -n mdt.*.enable_remote_dir_gid=0
+}
+
+test_300n() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ skip "Need MDS version at least 2.7.55" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ local stripe_index
+ local list=$(comma_list $(mdts_nodes))
+
+ trap cleanup_300n RETURN EXIT
+ mkdir -p $DIR/$tdir
+ chmod 777 $DIR/$tdir
+ $RUNAS $LFS setdirstripe -i0 -c$MDSCOUNT \
+ $DIR/$tdir/striped_dir > /dev/null 2>&1 &&
+ error "create striped dir succeeds with gid=0"
+
+ do_nodes $list $LCTL set_param -n mdt.*.enable_remote_dir_gid=-1
+ $RUNAS $LFS setdirstripe -i0 -c$MDSCOUNT $DIR/$tdir/striped_dir ||
+ error "create striped dir fails with gid=-1"
+
+ do_nodes $list $LCTL set_param -n mdt.*.enable_remote_dir_gid=0
+ $RUNAS $LFS setdirstripe -i 1 -c$MDSCOUNT -D \
+ $DIR/$tdir/striped_dir > /dev/null 2>&1 &&
+ error "set default striped dir succeeds with gid=0"
+
+
+ do_nodes $list $LCTL set_param -n mdt.*.enable_remote_dir_gid=-1
+ $RUNAS $LFS setdirstripe -i 1 -c$MDSCOUNT -D $DIR/$tdir/striped_dir ||
+ error "set default striped dir fails with gid=-1"
+
+
+ do_nodes $list $LCTL set_param -n mdt.*.enable_remote_dir_gid=0
+ $RUNAS mkdir $DIR/$tdir/striped_dir/test_dir ||
+ error "create test_dir fails"
+ $RUNAS mkdir $DIR/$tdir/striped_dir/test_dir1 ||
+ error "create test_dir1 fails"
+ $RUNAS mkdir $DIR/$tdir/striped_dir/test_dir2 ||
+ error "create test_dir2 fails"
+ cleanup_300n
+}
+run_test 300n "non-root user to create dir under striped dir with default EA"
+
+test_300o() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ skip "Need MDS version at least 2.7.55" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ local numfree1
+ local numfree2
+
+ mkdir -p $DIR/$tdir
+
+ numfree1=$(lctl get_param -n mdc.*MDT0000*.filesfree)
+ numfree2=$(lctl get_param -n mdc.*MDT0001*.filesfree)
+ if [ $numfree1 -lt 66000 -o $numfree2 -lt 66000 ]; then
+ skip "not enough free inodes $numfree1 $numfree2"
+ return
+ fi
+
+ numfree1=$(lctl get_param -n mdc.*MDT0000-mdc-*.kbytesfree)
+ numfree2=$(lctl get_param -n mdc.*MDT0001-mdc-*.kbytesfree)
+ if [ $numfree1 -lt 300000 -o $numfree2 -lt 300000 ]; then
+ skip "not enough free space $numfree1 $numfree2"
+ return
+ fi
+
+ $LFS setdirstripe -c2 $DIR/$tdir/striped_dir ||
+ error "setdirstripe fails"
+
+ createmany -d $DIR/$tdir/striped_dir/d 131000 ||
+ error "create dirs fails"
+
+ $LCTL set_param ldlm.namespaces.*mdc-*.lru_size=0
+ ls $DIR/$tdir/striped_dir > /dev/null ||
+ error "ls striped dir fails"
+ unlinkmany -d $DIR/$tdir/striped_dir/d 131000 ||
+ error "unlink big striped dir fails"
+}
+run_test 300o "unlink big sub stripe(> 65000 subdirs)"
+
+test_300p() {
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+
+ mkdir -p $DIR/$tdir
+
+ #define OBD_FAIL_OUT_ENOSPC 0x1704
+ do_facet mds2 lctl set_param fail_loc=0x80001704
+ $LFS setdirstripe -c2 $DIR/$tdir/bad_striped_dir > /dev/null 2>&1 &&
+ error "create striped directory should fail"
+
+ [ -e $DIR/$tdir/bad_striped_dir ] && error "striped dir exists"
+ true
+}
+run_test 300p "create striped directory without space"
+
prepare_remote_file() {
mkdir $DIR/$tdir/src_dir ||
error "create remote source failed"
}
run_test 400b "packaged headers can be compiled"
+test_401() { #LU-7437
+ local params
+ local procs
+
+ #count the number of parameters by "list_param -R"
+ params=$($LCTL list_param -R '*' 2>/dev/null | wc -l)
+ #count the number of parameters by listing proc files
+ ls -lRL /proc/{fs,sys}/{lnet,lustre} 2>/dev/null |
+ grep -v "^t" | grep -v "^d" > $TMP/$tfile
+ #Since there is no /proc/fs/lnet, we need to remove other
+ #3 directories, /proc/{fs,sys}/lustre and /proc/sys/lnet.
+ procs=$(($(sed /^$/d $TMP/$tfile | wc -l)-3))
+
+ [ $params -eq $procs ] ||
+ error "found $params parameters vs. $procs proc files"
+
+ rm -f $TMP/$tfile
+}
+run_test 401 "Verify if 'lctl list_param -R' can list parameters recursively"
+
#
# tests that do cleanup/setup should be run at the end
#
git://git.whamcloud.com / fs / lustre-release.git / blobdiff