LU-6124 test: skip tests require remote server with nodsh set

[fs/lustre-release.git] / lustre / tests / sanity.sh

diff --git a/lustre/tests/sanity.sh b/lustre/tests/sanity.sh
index bbf65c3..232c45c 100644 (file)
--- a/lustre/tests/sanity.sh
+++ b/lustre/tests/sanity.sh
@@ -664,7 +664,7 @@ test_17n() {
                mkdir -p $DIR/$tdir/remote_dir_${i}
                createmany -o $DIR/$tdir/remote_dir_${i}/f 10 ||
                        error "create files under remote dir failed $i"
-               $LFS mv --mdt-index 1 $DIR/$tdir/remote_dir_${i} ||
+               $LFS migrate --mdt-index 1 $DIR/$tdir/remote_dir_${i} ||
                        error "migrate remote dir error $i"
        done
        check_fs_consistency_17n || error "e2fsck report error after migration"
@@ -1357,6 +1357,9 @@ test_27d() {
 run_test 27d "create file with default settings ================"
 
 test_27e() {
+       # LU-5839 adds check for existed layout before setting it
+       [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.56) ]] &&
+               skip "Need MDS version at least 2.7.56" && return
        test_mkdir -p $DIR/d27
        $SETSTRIPE -c 2 $DIR/d27/f12 || error "setstripe failed"
        $SETSTRIPE -c 2 $DIR/d27/f12 && error "setstripe succeeded twice"
@@ -7292,6 +7295,8 @@ free_min_max () {
 
 test_116a() { # was previously test_116()
        [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+       remote_mds_nodsh && skip "remote MDS with nodsh" && return
+
        [[ $OSTCOUNT -lt 2 ]] && skip_env "$OSTCOUNT < 2 OSTs" && return
 
        echo -n "Free space priority "
@@ -7411,6 +7416,8 @@ run_test 116a "stripe QOS: free space balance ==================="
 
 test_116b() { # LU-2093
        [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+       remote_mds_nodsh && skip "remote MDS with nodsh" && return
+
 #define OBD_FAIL_MDS_OSC_CREATE_FAIL     0x147
        local old_rr=$(do_facet $SINGLEMDS lctl get_param -n \
                       lo*.$FSNAME-MDT0000-mdtlov.qos_threshold_rr | head -1)
@@ -9374,6 +9381,79 @@ test_133g() {
 }
 run_test 133g "Check for Oopses on bad io area writes/reads in /proc"
 
+test_134a() {
+       [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.54) ]] &&
+               skip "Need MDS version at least 2.7.54" && return
+
+       mkdir -p $DIR/$tdir || error "failed to create $DIR/$tdir"
+       cancel_lru_locks mdc
+
+       local nsdir="ldlm.namespaces.*-MDT0000-mdc-*"
+       local unused=$($LCTL get_param -n $nsdir.lock_unused_count)
+       [ $unused -eq 0 ] || "$unused locks are not cleared"
+
+       local nr=1000
+       createmany -o $DIR/$tdir/f $nr ||
+               error "failed to create $nr files in $DIR/$tdir"
+       unused=$($LCTL get_param -n $nsdir.lock_unused_count)
+
+       #define OBD_FAIL_LDLM_WATERMARK_LOW     0x327
+       do_facet mds1 $LCTL set_param fail_loc=0x327
+       do_facet mds1 $LCTL set_param fail_val=500
+       touch $DIR/$tdir/m
+
+       echo "sleep 10 seconds ..."
+       sleep 10
+       local lck_cnt=$($LCTL get_param -n $nsdir.lock_unused_count)
+
+       do_facet mds1 $LCTL set_param fail_loc=0
+       do_facet mds1 $LCTL set_param fail_val=0
+       [ $lck_cnt -lt $unused ] ||
+               error "No locks reclaimed, before:$unused, after:$lck_cnt"
+
+       rm $DIR/$tdir/m
+       unlinkmany $DIR/$tdir/f $nr
+}
+run_test 134a "Server reclaims locks when reaching low watermark"
+
+test_134b() {
+       [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.54) ]] &&
+               skip "Need MDS version at least 2.7.54" && return
+
+       mkdir -p $DIR/$tdir || error "failed to create $DIR/$tdir"
+       cancel_lru_locks mdc
+
+       local low_wm=$(do_facet mds1 $LCTL get_param -n ldlm.watermark_mb_low)
+       # disable reclaim temporarily
+       do_facet mds1 $LCTL set_param ldlm.watermark_mb_low=0
+
+       #define OBD_FAIL_LDLM_WATERMARK_HIGH     0x328
+       do_facet mds1 $LCTL set_param fail_loc=0x328
+       do_facet mds1 $LCTL set_param fail_val=500
+
+       $LCTL set_param debug=+trace
+
+       local nr=600
+       createmany -o $DIR/$tdir/f $nr &
+       local create_pid=$!
+
+       echo "Sleep $TIMEOUT seconds ..."
+       sleep $TIMEOUT
+       if ! ps -p $create_pid  > /dev/null 2>&1; then
+               do_facet mds1 $LCTL set_param fail_loc=0
+               do_facet mds1 $LCTL set_param fail_val=0
+               do_facet mds1 $LCTL set_param ldlm.watermark_mb_low=$low_wm
+               error "createmany finished incorrectly!"
+       fi
+       do_facet mds1 $LCTL set_param fail_loc=0
+       do_facet mds1 $LCTL set_param fail_val=0
+       do_facet mds1 $LCTL set_param ldlm.watermark_mb_low=$low_wm
+       wait $create_pid || return 1
+
+       unlinkmany $DIR/$tdir/f $nr
+}
+run_test 134b "Server rejects lock request when reaching high watermark"
+
 test_140() { #bug-17379
        [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
         test_mkdir -p $DIR/$tdir || error "Creating dir $DIR/$tdir"
@@ -10380,6 +10460,8 @@ test_160b() { # LU-3587
 run_test 160b "Verify that very long rename doesn't crash in changelog"
 
 test_160c() {
+       remote_mds_nodsh && skip "remote MDS with nodsh" && return
+
        local rc=0
        local server_version=$(lustre_version_code $SINGLEMDS)
 
@@ -10699,6 +10781,8 @@ run_test 162b "striped directory path lookup sanity"
 
 # LU-4239: Verify fid2path works with paths 100 or more directories deep
 test_162c() {
+       [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.51) ]] &&
+               skip "Need MDS version at least 2.7.51" && return
        test_mkdir $DIR/$tdir.local
        test_mkdir $DIR/$tdir.remote
        local lpath=$tdir.local
@@ -11226,6 +11310,10 @@ test_185() { # LU-2441
 run_test 185 "Volatile file support"
 
 test_187a() {
+       remote_mds_nodsh && skip "remote MDS with nodsh" && return
+       [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.0) ] &&
+               skip "Need MDS version at least 2.3.0" && return
+
        local dir0=$DIR/$tdir/$testnum
        mkdir -p $dir0 || error "creating dir $dir0"
 
@@ -11243,6 +11331,10 @@ test_187a() {
 run_test 187a "Test data version change"
 
 test_187b() {
+       remote_mds_nodsh && skip "remote MDS with nodsh" && return
+       [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.0) ] &&
+               skip "Need MDS version at least 2.3.0" && return
+
        local dir0=$DIR/$tdir/$testnum
        mkdir -p $dir0 || error "creating dir $dir0"
 
@@ -11494,6 +11586,9 @@ cleanup_205() {
 test_205() { # Job stats
        [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
        remote_mgs_nodsh && skip "remote MGS with nodsh" && return
+       remote_mds_nodsh && skip "remote MDS with nodsh" && return
+       remote_ost_nodsh && skip "remote OST with nodsh" && return
+
        [ -z "$(lctl get_param -n mdc.*.connect_flags | grep jobstats)" ] &&
                skip "Server doesn't support jobstats" && return 0
        [[ $JOBID_VAR = disable ]] && skip "jobstats is disabled" && return
@@ -11632,9 +11727,9 @@ test_208() {
        # for now as only exclusive open is supported. After generic lease
        # is done, this test suite should be revised. - Jinshan
 
+       remote_mds_nodsh && skip "remote MDS with nodsh" && return
        [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.4.52) ]] ||
                { skip "Need MDS version at least 2.4.52"; return 0; }
-       remote_mds_nodsh && skip "remote MDS with nodsh" && return
 
        echo "==== test 1: verify get lease work"
        $MULTIOP $DIR/$tfile oO_CREAT:O_RDWR:eRE+eU || error "get lease error"
@@ -11962,6 +12057,8 @@ run_test 219 "LU-394: Write partial won't cause uncontiguous pages vec at LND"
 test_220() { #LU-325
        [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
        remote_ost_nodsh && skip "remote OST with nodsh" && return
+       remote_mds_nodsh && skip "remote MDS with nodsh" && return
+       remote_mgs_nodsh && skip "remote MGS with nodsh" && return
        local OSTIDX=0
 
        test_mkdir -p $DIR/$tdir
@@ -12132,6 +12229,7 @@ run_test 224c "Don't hang if one of md lost during large bulk RPC"
 MDSSURVEY=${MDSSURVEY:-$(which mds-survey 2>/dev/null || true)}
 test_225a () {
        [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+       remote_mds_nodsh && skip "remote MDS with nodsh" && return
        if [ -z ${MDSSURVEY} ]; then
              skip_env "mds-survey not found" && return
        fi
@@ -12161,7 +12259,7 @@ run_test 225a "Metadata survey sanity with zero-stripe"
 
 test_225b () {
        [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
-
+       remote_mds_nodsh && skip "remote MDS with nodsh" && return
        if [ -z ${MDSSURVEY} ]; then
              skip_env "mds-survey not found" && return
        fi
@@ -12510,7 +12608,7 @@ test_230b() {
        ln -s $migrate_dir/$tfile $migrate_dir/${tfile}_ln
        ln -s $other_dir/$tfile $migrate_dir/${tfile}_ln_other
 
-       $LFS mv -v -M $MDTIDX $migrate_dir ||
+       $LFS migrate -m $MDTIDX $migrate_dir ||
                error "migrate remote dir error"
 
        echo "migratate to MDT1, then checking.."
@@ -12574,7 +12672,7 @@ test_230b() {
 
        #migrate back to MDT0
        MDTIDX=0
-       $LFS mv -v -M $MDTIDX $migrate_dir ||
+       $LFS migrate -m $MDTIDX $migrate_dir ||
                error "migrate remote dir error"
 
        echo "migrate back to MDT0, checking.."
@@ -12632,6 +12730,7 @@ run_test 230b "migrate directory"
 
 test_230c() {
        [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+       remote_mds_nodsh && skip "remote MDS with nodsh" && return
        [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
        local MDTIDX=1
        local mdt_index
@@ -12651,7 +12750,7 @@ test_230c() {
        do_facet mds1 lctl set_param fail_loc=0x20001801
        do_facet mds1 lctl  set_param fail_val=5
        local t=$(ls $migrate_dir | wc -l)
-       $LFS mv --mdt-index $MDTIDX $migrate_dir &&
+       $LFS migrate --mdt-index $MDTIDX $migrate_dir &&
                error "migrate should fail after 5 entries"
        local u=$(ls $migrate_dir | wc -l)
        [ "$u" == "$t" ] || error "$u != $t during migration"
@@ -12663,7 +12762,7 @@ test_230c() {
        do_facet mds1 lctl set_param fail_loc=0
        do_facet mds1 lctl set_param fail_val=0
 
-       $LFS mv -M $MDTIDX $migrate_dir ||
+       $LFS migrate -m $MDTIDX $migrate_dir ||
                error "migrate open files should failed with open files"
 
        echo "Finish migration, then checking.."
@@ -12695,7 +12794,8 @@ test_230d() {
                        error "create files under remote dir failed $i"
        done
 
-       $LFS mv -M $MDTIDX -v $migrate_dir || error "migrate remote dir error"
+       $LFS migrate -m $MDTIDX $migrate_dir ||
+               error "migrate remote dir error"
 
        echo "Finish migration, then checking.."
        for file in $(find $migrate_dir); do
@@ -13478,6 +13578,27 @@ test_300k() {
 }
 run_test 300k "test large striped directory"
 
+test_300l() {
+       [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+       [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+       local stripe_index
+
+       test_mkdir -p $DIR/$tdir/striped_dir
+       chown $RUNAS_ID $DIR/$tdir/striped_dir ||
+                       error "chown $RUNAS_ID failed"
+       $LFS setdirstripe -i 1 -D $DIR/$tdir/striped_dir ||
+               error "set default striped dir failed"
+
+       #define OBD_FAIL_MDS_STALE_DIR_LAYOUT    0x158
+       $LCTL set_param fail_loc=0x80000158
+       $RUNAS mkdir $DIR/$tdir/striped_dir/test_dir || error "create dir fails"
+
+       stripe_index=$($LFS getdirstripe -i $DIR/$tdir/striped_dir/test_dir)
+       [ $stripe_index -eq 1 ] ||
+               error "expect 1 get $stripe_index for $dir"
+}
+run_test 300l "non-root user to create dir under striped dir with stale layout"
+
 prepare_remote_file() {
        mkdir $DIR/$tdir/src_dir ||
                error "create remote source failed"