# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
# with LOD/OSP landing
-# bug number for skipped tests: LU-2036 LU-8139
-ALWAYS_EXCEPT=" 76 101g $ALWAYS_EXCEPT"
+# bug number for skipped tests: LU-2036 LU-8411
+ALWAYS_EXCEPT=" 76 407 $ALWAYS_EXCEPT"
is_sles11() # LU-4341
{
[ "$SLOW" = "no" ] && EXCEPT_SLOW="24D 27m 64b 68 71 115 300o"
if [ $(facet_fstype $SINGLEMDS) = "zfs" ]; then
- # bug number for skipped test: LU-4536 LU-1957 LU-2805
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 65ic 180 184c"
- # 4 13 (min)"
- [ "$SLOW" = "no" ] && EXCEPT_SLOW="$EXCEPT_SLOW 51b 51ba"
+ # bug number for skipped test: LU-4536 LU-1957
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 65ic 180"
+ # 13 (min)"
+ [ "$SLOW" = "no" ] && EXCEPT_SLOW="$EXCEPT_SLOW 51b"
fi
FAIL_ON_ERROR=false
test_mkdir $DIR/$tdir/d/subdir || error "mkdir $tdir/d/subdir failed"
$CHECKSTAT -g \#$RUNAS_GID $DIR/$tdir/d/subdir ||
error "$tdir/d/subdir should be GID $RUNAS_GID"
+ if [[ $MDSCOUNT -gt 1 ]]; then
+ # check remote dir sgid inherite
+ $LFS mkdir -i 0 $DIR/$tdir.local ||
+ error "mkdir $tdir.local failed"
+ chmod g+s $DIR/$tdir.local ||
+ error "chmod $tdir.local failed"
+ chgrp $RUNAS_GID $DIR/$tdir.local ||
+ error "chgrp $tdir.local failed"
+ $LFS mkdir -i 1 $DIR/$tdir.local/$tdir.remote ||
+ error "mkdir $tdir.remote failed"
+ $CHECKSTAT -g \#$RUNAS_GID $DIR/$tdir.local/$tdir.remote ||
+ error "$tdir.remote should be owned by $UID.$RUNAS_ID"
+ $CHECKSTAT -p 02755 $DIR/$tdir.local/$tdir.remote ||
+ error "$tdir.remote should be mode 02755"
+ fi
}
run_test 6g "Is new dir in sgid dir inheriting group?"
run_test 24u "create stripe file"
page_size() {
- getconf PAGE_SIZE
+ local size
+ size=$(getconf PAGE_SIZE 2>/dev/null)
+ echo -n ${size:-4096}
}
simple_cleanup_common() {
createmany -o $DIR/$tdir/t- 1000
do_nodes $list $LCTL set_param fail_loc=0
- TLOG=$DIR/$tfile.getstripe
+ TLOG=$TMP/$tfile.getstripe
$GETSTRIPE $DIR/$tdir > $TLOG
OBJS=$(awk -vobj=0 '($1 == 0) { obj += 1 } END { print obj; }' $TLOG)
unlinkmany $DIR/$tdir/t- 1000
test_27D() {
[ $OSTCOUNT -lt 2 ] && skip "needs >= 2 OSTs" && return
[ -n "$FILESET" ] && skip "SKIP due to FILESET set" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
local POOL=${POOL:-testpool}
local first_ost=0
local last_ost=$(($OSTCOUNT - 1))
test_mkdir -p $DIR/$tdir
pool_add $POOL || error "pool_add failed"
pool_add_targets $POOL $ost_range || error "pool_add_targets failed"
- llapi_layout_test -d$DIR/$tdir -p$POOL -o$OSTCOUNT ||
+
+ local skip27D
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.64) ] &&
+ skip27D = "-s 29"
+ llapi_layout_test -d$DIR/$tdir -p$POOL -o$OSTCOUNT $skip27D ||
error "llapi_layout_test failed"
- cleanup_pools || error "cleanup_pools failed"
+
+ destroy_test_pools || error "destroy test pools failed"
}
run_test 27D "validate llapi_layout API"
}
run_test 27E "check that default extended attribute size properly increases"
+test_27F() { # LU-5346/LU-7975
+
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+
+ [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.51) ]] &&
+ skip "Need MDS version at least 2.8.51" && return
+
+ test_mkdir -p $DIR/$tdir
+ rm -f $DIR/$tdir/f0
+ $SETSTRIPE -c 2 $DIR/$tdir
+
+ # stop all OSTs to reproduce situation for LU-7975 ticket
+ for num in $(seq $OSTCOUNT); do
+ stop ost$num
+ done
+
+ # open/create f0 with O_LOV_DELAY_CREATE
+ # truncate f0 to a non-0 size
+ # close
+ multiop $DIR/$tdir/f0 oO_RDWR:O_CREAT:O_LOV_DELAY_CREATE:T1050000c
+
+ $CHECKSTAT -s 1050000 $DIR/$tdir/f0 || error "checkstat failed"
+ # open/write it again to force delayed layout creation
+ cat /etc/hosts > $DIR/$tdir/f0 &
+ catpid=$!
+
+ # restart OSTs
+ for num in $(seq $OSTCOUNT); do
+ start ost$num $(ostdevname $num) $OST_MOUNT_OPTS ||
+ error "ost$num failed to start"
+ done
+
+ wait $catpid || error "cat failed"
+
+ cmp /etc/hosts $DIR/$tdir/f0 || error "cmp failed"
+ [[ $($GETSTRIPE -c $DIR/$tdir/f0) == 2 ]] || error "wrong stripecount"
+
+}
+run_test 27F "Client resend delayed layout creation with non-zero size"
+
# createtest also checks that device nodes are created and
# then visible correctly (#2091)
test_28() { # bug 2091
test_29() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return 0
- cancel_lru_locks mdc
+ sync; sleep 1; sync # flush out any dirty pages from previous tests
+ cancel_lru_locks
test_mkdir $DIR/d29
touch $DIR/d29/foo
log 'first d29'
run_test 31p "remove of open striped directory"
cleanup_test32_mount() {
+ local rc=0
trap 0
- $UMOUNT $DIR/$tdir/ext2-mountpoint
+ local loopdev=$(losetup -a | grep $EXT2_DEV | sed -ne 's/:.*$//p')
+ $UMOUNT $DIR/$tdir/ext2-mountpoint || rc=$?
+ losetup -d $loopdev || true
+ rm -rf $DIR/$tdir
+ return $rc
}
test_32a() {
run_test 32o "stat d32o/symlink->tmp/symlink->lustre-root/$tfile"
test_32p() {
- log 32p_1
+ log 32p_1
rm -fr $DIR/d32p
- log 32p_2
+ log 32p_2
rm -f $DIR/$tfile
- log 32p_3
+ log 32p_3
touch $DIR/$tfile
- log 32p_4
+ log 32p_4
test_mkdir -p $DIR/d32p/tmp
- log 32p_5
+ log 32p_5
TMP_DIR=$DIR/d32p/tmp
- log 32p_6
+ log 32p_6
ln -s $DIR/$tfile $TMP_DIR/symlink12
- log 32p_7
+ log 32p_7
ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
- log 32p_8
+ log 32p_8
cat $DIR/d32p/tmp/symlink12 || error
- log 32p_9
+ log 32p_9
cat $DIR/d32p/symlink02 || error
- log 32p_10
+ log 32p_10
}
run_test 32p "open d32p/symlink->tmp/symlink->lustre-root/$tfile"
-cleanup_testdir_mount() {
- trap 0
- $UMOUNT $DIR/$tdir
-}
-
test_32q() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ -e $DIR/$tdir ] && rm -fr $DIR/$tdir
- trap cleanup_testdir_mount EXIT
- test_mkdir -p $DIR/$tdir
- touch $DIR/$tdir/under_the_mount
- mount -t ext2 -o loop $EXT2_DEV $DIR/$tdir
- ls $DIR/$tdir | grep "\<under_the_mount\>" && error
- cleanup_testdir_mount
+ trap cleanup_test32_mount EXIT
+ test_mkdir -p $DIR/$tdir/ext2-mountpoint
+ touch $DIR/$tdir/ext2-mountpoint/under_the_mount
+ mount -t ext2 -o loop $EXT2_DEV $DIR/$tdir/ext2-mountpoint
+ ls $DIR/$tdir/ext2-mountpoint | grep "\<under_the_mount\>" && error
+ cleanup_test32_mount
}
run_test 32q "stat follows mountpoints in Lustre (should return error)"
test_32r() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ -e $DIR/$tdir ] && rm -fr $DIR/$tdir
- trap cleanup_testdir_mount EXIT
- test_mkdir -p $DIR/$tdir
- touch $DIR/$tdir/under_the_mount
- mount -t ext2 -o loop $EXT2_DEV $DIR/$tdir
- ls $DIR/$tdir | grep -q under_the_mount && error || true
- cleanup_testdir_mount
+ trap cleanup_test32_mount EXIT
+ test_mkdir -p $DIR/$tdir/ext2-mountpoint
+ touch $DIR/$tdir/ext2-mountpoint/under_the_mount
+ mount -t ext2 -o loop $EXT2_DEV $DIR/$tdir/ext2-mountpoint
+ ls $DIR/$tdir/ext2-mountpoint | grep -q under_the_mount && error || true
+ cleanup_test32_mount
}
run_test 32r "opendir follows mountpoints in Lustre (should return error)"
test_33f() {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
mkdir $DIR/$tdir
chmod go+rwx $DIR/$tdir
}
run_test 33f "nonroot user can create, access, and remove a striped directory"
+test_33g() {
+ mkdir -p $DIR/$tdir/dir2
+
+ local err=$($RUNAS mkdir $DIR/$tdir/dir2 2>&1)
+ echo $err
+ [[ $err =~ "exists" ]] || error "Not exists error"
+}
+run_test 33g "nonroot user create already existing root created file"
+
TEST_34_SIZE=${TEST_34_SIZE:-2000000000000}
test_34a() {
rm -f $DIR/f34
}
run_test 38 "open a regular file with O_DIRECTORY should return -ENOTDIR ==="
-test_39() {
+test_39a() { # was test_39
touch $DIR/$tfile
touch $DIR/${tfile}2
# ls -l $DIR/$tfile $DIR/${tfile}2
error "O_TRUNC didn't change timestamps"
fi
}
-run_test 39 "mtime changed on create ==========================="
+run_test 39a "mtime changed on create ==========================="
test_39b() {
test_mkdir -p -c1 $DIR/$tdir
run_test 39m "test atime and mtime before 1970"
test_39n() { # LU-3832
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
local atime_diff=$(do_facet $SINGLEMDS \
lctl get_param -n mdd.*MDT0000*.atime_diff)
local atime0
run_test 39p "remote directory cached attributes updated after create ========"
-test_39p() { # LU-8041
+test_39q() { # LU-8041
local testdir=$DIR/$tdir
mkdir -p $testdir
multiop_bg_pause $testdir D_c || error "multiop failed"
local atime=$(stat -c %X $testdir)
[ "$atime" -ne 0 ] || error "atime is zero"
}
-run_test 39p "close won't zero out atime"
+run_test 39q "close won't zero out atime"
test_40() {
dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1
}
run_test 42e "verify sub-RPC writes are not done synchronously"
-test_43() {
+test_43A() { # was test_43
test_mkdir -p $DIR/$tdir
cp -p /bin/ls $DIR/$tdir/$tfile
$MULTIOP $DIR/$tdir/$tfile Ow_c &
$DIR/$tdir/$tfile && error || true
kill -USR1 $pid
}
-run_test 43 "execution of file opened for write should return -ETXTBSY"
+run_test 43A "execution of file opened for write should return -ETXTBSY"
test_43a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
}
run_test 43c "md5sum of copy into lustre========================"
-test_44() {
+test_44A() { # was test_44
[[ $OSTCOUNT -lt 2 ]] && skip_env "skipping 2-stripe test" && return
dd if=/dev/zero of=$DIR/f1 bs=4k count=1 seek=1023
dd if=$DIR/f1 bs=4k count=1 > /dev/null
}
-run_test 44 "zero length read from a sparse stripe ============="
+run_test 44A "zero length read from a sparse stripe ============="
test_44a() {
local nstripe=$($LCTL lov_getconfig $DIR | grep default_stripe_count: |
test_49() { # LU-1030
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
# get ost1 size - lustre-OST0000
ost1_size=$(do_facet ost1 $LFS df | grep ${ost1_svc} |
awk '{ print $4 }')
}
run_test 51a "special situations: split htree with empty entry =="
-export NUMTEST=70000
+cleanup_print_lfs_df () {
+ trap 0
+ $LFS df
+ $LFS df -i
+}
+
test_51b() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- local BASE=$DIR/d${base}.${TESTSUITE}
+ local dir=$DIR/$tdir
+
+ local nrdirs=$((65536 + 100))
# cleanup the directory
- rm -fr $BASE
+ rm -fr $dir
- test_mkdir -p -c1 $BASE
+ test_mkdir -p -c1 $dir
$LFS df
$LFS df -i
- local mdtidx=$(printf "%04x" $($LFS getstripe -M $BASE))
+ local mdtidx=$(printf "%04x" $($LFS getstripe -M $dir))
local numfree=$(lctl get_param -n mdc.$FSNAME-MDT$mdtidx*.filesfree)
- [[ $numfree -lt 21000 ]] &&
+ [[ $numfree -lt $nrdirs ]] &&
skip "not enough free inodes ($numfree) on MDT$mdtidx" &&
return
- [[ $numfree -lt $NUMTEST ]] && NUMTEST=$(($numfree - 50)) &&
- echo "reduced count to $NUMTEST due to inodes on MDT$mdtidx"
-
# need to check free space for the directories as well
local blkfree=$(lctl get_param -n mdc.$FSNAME-MDT$mdtidx*.kbytesavail)
- numfree=$((blkfree / 4))
- [[ $numfree -lt $NUMTEST ]] && NUMTEST=$((numfree - 50)) &&
- echo "reduced count to $NUMTEST due to blocks on MDT$mdtidx"
-
- createmany -d $BASE/d $NUMTEST && echo $NUMTEST > $BASE/fnum ||
- {
- $LFS df
- $LFS df -i
- echo "failed" > $BASE/fnum
- error "failed to create $NUMTEST subdirs in MDT$mdtidx:$BASE"
- }
-}
-run_test 51b "exceed 64k subdirectory nlink limit"
+ numfree=$(( blkfree / $(fs_inode_ksize) ))
+ [[ $numfree -lt $nrdirs ]] && skip "not enough blocks ($numfree)" &&
+ return
-test_51ba() { # LU-993
- local BASE=$DIR/d${base}.${TESTSUITE}
- # unlink all but 100 subdirectories, then check it still works
- local LEFT=100
- [ -f $BASE/fnum ] && local NUMPREV=$(cat $BASE/fnum) && rm $BASE/fnum
+ trap cleanup_print_lfsdf EXIT
- [ "$NUMPREV" != "failed" ] && NUMTEST=$NUMPREV
- local DELETE=$((NUMTEST - LEFT))
+ # create files
+ createmany -d $dir/d $nrdirs ||
+ error "failed to create $nrdirs subdirs in MDT$mdtidx:$dir"
- # continue on to run this test even if 51b didn't finish,
- # just to delete the many subdirectories created.
- [ ! -d "${BASE}/d1" ] && skip "test_51b() not run" && return 0
+ # really created :
+ nrdirs=$(ls -U $dir | wc -l)
+
+ # unlink all but 100 subdirectories, then check it still works
+ local left=100
+ local delete=$((nrdirs - left))
+
+ $LFS df
+ $LFS df -i
# for ldiskfs the nlink count should be 1, but this is OSD specific
# and so this is listed for informational purposes only
- echo "nlink before: $(stat -c %h $BASE), created before: $NUMTEST"
- unlinkmany -d $BASE/d $DELETE
- RC=$?
-
- if [ $RC -ne 0 ]; then
- if [ "$NUMPREV" == "failed" ]; then
- skip "previous setup failed"
- return 0
- else
- error "unlink of first $DELETE subdirs failed"
- return $RC
- fi
- fi
+ echo "nlink before: $(stat -c %h $dir), created before: $nrdirs"
+ unlinkmany -d $dir/d $delete ||
+ error "unlink of first $delete subdirs failed"
- echo "nlink between: $(stat -c %h $BASE)"
- # trim the first line of ls output
- local FOUND=$(($(ls -l ${BASE} | wc -l) - 1))
- [ $FOUND -ne $LEFT ] &&
- error "can't find subdirs: found only $FOUND/$LEFT"
+ echo "nlink between: $(stat -c %h $dir)"
+ local found=$(ls -U $dir | wc -l)
+ [ $found -ne $left ] &&
+ error "can't find subdirs: found only $found, expected $left"
- unlinkmany -d $BASE/d $DELETE $LEFT ||
- error "unlink of second $LEFT subdirs failed"
+ unlinkmany -d $dir/d $delete $left ||
+ error "unlink of second $left subdirs failed"
# regardless of whether the backing filesystem tracks nlink accurately
# or not, the nlink count shouldn't be more than "." and ".." here
- local AFTER=$(stat -c %h $BASE)
- [[ $AFTER -gt 2 ]] && error "nlink after: $AFTER > 2" ||
- echo "nlink after: $AFTER"
+ local after=$(stat -c %h $dir)
+ [[ $after -gt 2 ]] && error "nlink after: $after > 2" ||
+ echo "nlink after: $after"
+
+ cleanup_print_lfs_df
}
-run_test 51ba "verify nlink for many subdirectory cleanup"
+run_test 51b "exceed 64k subdirectory nlink limit on create, verify unlink"
test_51d() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
}
cleanup_54c() {
+ local rc=0
loopdev="$DIR/loop54c"
trap 0
error "$GETSTRIPE $DIR/$tdir: found $FILENUM, not $NUMFILES"
echo "$GETSTRIPE --recursive passed."
- # test lfs getstripe with file instead of dir
+ # test lfs getstripe with file instead of dir
FILENUM=$($GETSTRIPE $DIR/$tdir/file1 | grep -c obdidx)
[[ $FILENUM -eq 1 ]] ||
error "$GETSTRIPE $DIR/$tdir/file1: found $FILENUM, not 1"
echo "$GETSTRIPE file1 passed."
- #test lfs getstripe with --verbose
+ #test lfs getstripe with --verbose
[[ $($GETSTRIPE --verbose $DIR/$tdir |
grep -c lmm_magic) -eq $NUMFILES ]] ||
error "$GETSTRIPE --verbose $DIR/$tdir: want $NUMFILES"
[[ $($GETSTRIPE $DIR/$tdir | grep -c lmm_magic) -eq 0 ]] ||
- rror "$GETSTRIPE $DIR/$tdir: showed lmm_magic"
+ error "$GETSTRIPE $DIR/$tdir: showed lmm_magic"
+
+ #test lfs getstripe with -v prints lmm_fid
+ [[ $($GETSTRIPE -v $DIR/$tdir | grep -c lmm_fid) -eq $NUMFILES ]] ||
+ error "$GETSTRIPE -v $DIR/$tdir: want $NUMFILES lmm_fid: lines"
+ [[ $($GETSTRIPE $DIR/$tdir | grep -c lmm_fid) -eq 0 ]] ||
+ error "$GETSTRIPE $DIR/$tdir: showed lmm_fid"
echo "$GETSTRIPE --verbose passed."
- #test lfs getstripe with --obd
- $GETSTRIPE --obd wrong_uuid $DIR/$tdir 2>&1 |
+ #check for FID information
+ local fid1=$($GETSTRIPE --fid $DIR/$tdir/file1)
+ local fid2=$($GETSTRIPE --verbose $DIR/$tdir/file1 |
+ awk '/lmm_fid: / { print $2 }')
+ local fid3=$($LFS path2fid $DIR/$tdir/file1)
+ [ "$fid1" != "$fid2" ] &&
+ error "getstripe --fid $fid1 != getstripe --verbose $fid2"
+ [ "$fid1" != "$fid3" ] &&
+ error "getstripe --fid $fid1 != lfs path2fid $fid3"
+ echo "$GETSTRIPE --fid passed."
+
+ #test lfs getstripe with --obd
+ $GETSTRIPE --obd wrong_uuid $DIR/$tdir 2>&1 |
grep -q "unknown obduuid" ||
error "$GETSTRIPE --obd wrong_uuid should return error message"
[[ $OSTCOUNT -lt 2 ]] &&
- skip_env "skipping other $GETSTRIPE --obd test" && return
+ skip_env "skipping other $GETSTRIPE --obd test" && return
- OSTIDX=1
- OBDUUID=$(ostuuid_from_index $OSTIDX)
+ OSTIDX=1
+ OBDUUID=$(ostuuid_from_index $OSTIDX)
FILENUM=$($GETSTRIPE -ir $DIR/$tdir | grep "^$OSTIDX\$" | wc -l)
FOUND=$($GETSTRIPE -r --obd $OBDUUID $DIR/$tdir | grep obdidx | wc -l)
[[ $FOUND -eq $FILENUM ]] ||
}
run_test 56a "check $GETSTRIPE"
+test_56b() {
+ test_mkdir $DIR/$tdir
+ NUMDIRS=3
+ for i in $(seq 1 $NUMDIRS); do
+ test_mkdir $DIR/$tdir/dir$i
+ done
+
+ # test lfs getdirstripe default mode is non-recursion, which is
+ # different from lfs getstripe
+ dircnt=$($LFS getdirstripe $DIR/$tdir | grep -c lmv_stripe_count)
+ [[ $dircnt -eq 1 ]] ||
+ error "$LFS getdirstripe: found $dircnt, not 1"
+ dircnt=$($LFS getdirstripe --recursive $DIR/$tdir |
+ grep -c lmv_stripe_count)
+ [[ $dircnt -eq $((NUMDIRS + 1)) ]] ||
+ error "$LFS getdirstripe --recursive: found $dircnt, \
+ not $((NUMDIRS + 1))"
+}
+run_test 56b "check $LFS getdirstripe"
+
NUMFILES=3
NUMDIRS=3
setup_56() {
test_56t() { # LU-611
TDIR=$DIR/${tdir}t
- setup_56 $NUMFILES $NUMDIRS "-s 512k"
+ setup_56 $NUMFILES $NUMDIRS "--stripe-size 512k"
$SETSTRIPE -S 256k $TDIR/$tfile.{0,1,2,3}
# verify "lctl mark" is even working"
MESSAGE="test message ID $RANDOM $$"
- $LCTL mark "$HOSTNAME $MESSAGE" || error "$LCTL mark failed"
+ $LCTL mark "$MESSAGE" || error "$LCTL mark failed"
dmesg | grep -q "$MESSAGE" || error "didn't find debug marker in log"
lctl set_param printk=0 || error "set lnet.printk failed"
lctl get_param -n printk | grep emerg || error "lnet.printk dropped emerg"
MESSAGE="new test message ID $RANDOM $$"
# Assume here that libcfs_debug_mark_buffer() uses D_WARNING
- $LCTL mark "$HOSTNAME $MESSAGE" || error "$LCTL mark failed"
+ $LCTL mark "$MESSAGE" || error "$LCTL mark failed"
dmesg | grep -q "$MESSAGE" && error "D_WARNING wasn't masked" || true
lctl set_param -n printk="$SAVEPRINTK"
test_60e() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
touch $DIR/$tfile
#define OBD_FAIL_MDS_LLOG_CREATE_FAILED2 0x15b
do_facet mds1 lctl set_param fail_loc=0x15b
[[ $OSTCOUNT -lt 2 ]] && skip_env "too few OSTs" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
- echo "Check OST status: "
- local MDS_OSCS=`do_facet $SINGLEMDS lctl dl |
- awk '/[oO][sS][cC].*md[ts]/ { print $4 }'`
+ local disable_precreate=true
+ [ $(lustre_version_code $SINGLEMDS) -le $(version_code 2.8.54) ] &&
+ disable_precreate=false
- for OSC in $MDS_OSCS; do
- echo $OSC "is activate"
- do_facet $SINGLEMDS lctl --device %$OSC activate
- done
+ echo "Check OST status: "
+ local MDS_OSCS=$(do_facet $SINGLEMDS lctl dl |
+ awk '/[oO][sS][cC].*md[ts]/ { print $4 }')
- mkdir -p $DIR/$tdir
- for INACTIVE_OSC in $MDS_OSCS; do
- echo "Deactivate: " $INACTIVE_OSC
- do_facet $SINGLEMDS lctl --device %$INACTIVE_OSC deactivate
- for STRIPE_OSC in $MDS_OSCS; do
- OST=`osc_to_ost $STRIPE_OSC`
- IDX=`do_facet $SINGLEMDS lctl get_param -n lov.*md*.target_obd |
- awk -F: /$OST/'{ print $1 }' | head -n 1`
-
- [ -f $DIR/$tdir/$IDX ] && continue
- echo "$SETSTRIPE -i $IDX -c 1 $DIR/$tdir/$IDX"
- $SETSTRIPE -i $IDX -c 1 $DIR/$tdir/$IDX
- RC=$?
- [ $RC -ne 0 ] && error "setstripe should have succeeded"
- done
- rm -f $DIR/$tdir/*
- echo $INACTIVE_OSC "is Activate."
- do_facet $SINGLEMDS lctl --device %$INACTIVE_OSC activate
- done
+ for OSC in $MDS_OSCS; do
+ echo $OSC "is active"
+ do_facet $SINGLEMDS lctl --device %$OSC activate
+ done
+
+ for INACTIVE_OSC in $MDS_OSCS; do
+ local ost=$(osc_to_ost $INACTIVE_OSC)
+ local ostnum=$(do_facet $SINGLEMDS lctl get_param -n \
+ lov.*md*.target_obd |
+ awk -F: /$ost/'{ print $1 }' | head -n 1)
+
+ mkdir -p $DIR/$tdir
+ $SETSTRIPE -i $ostnum -c 1 $DIR/$tdir
+ createmany -o $DIR/$tdir/$tfile.$ostnum. 1000
+
+ echo "Deactivate: " $INACTIVE_OSC
+ do_facet $SINGLEMDS lctl --device %$INACTIVE_OSC deactivate
+
+ local count=$(do_facet $SINGLEMDS "lctl get_param -n \
+ osp.$ost*MDT0000.create_count")
+ local max_count=$(do_facet $SINGLEMDS "lctl get_param -n \
+ osp.$ost*MDT0000.max_create_count")
+ $disable_precreate &&
+ do_facet $SINGLEMDS "lctl set_param -n \
+ osp.$ost*MDT0000.max_create_count=0"
+
+ for idx in $(seq 0 $((OSTCOUNT - 1))); do
+ [ -f $DIR/$tdir/$idx ] && continue
+ echo "$SETSTRIPE -i $idx -c 1 $DIR/$tdir/$idx"
+ $SETSTRIPE -i $idx -c 1 $DIR/$tdir/$idx ||
+ error "setstripe $idx should succeed"
+ rm -f $DIR/$tdir/$idx || error "rm $idx failed"
+ done
+ unlinkmany $DIR/$tdir/$tfile.$ostnum. 1000
+ rmdir $DIR/$tdir
+
+ do_facet $SINGLEMDS "lctl set_param -n \
+ osp.$ost*MDT0000.max_create_count=$max_count"
+ do_facet $SINGLEMDS "lctl set_param -n \
+ osp.$ost*MDT0000.create_count=$count"
+ do_facet $SINGLEMDS lctl --device %$INACTIVE_OSC activate
+ echo $INACTIVE_OSC "is Activate"
+
+ wait_osc_import_state mds ost$ostnum FULL
+ done
}
run_test 65k "validate manual striping works properly with deactivated OSCs"
}
run_test 65l "lfs find on -1 stripe dir ========================"
+test_65m() {
+ $RUNAS $SETSTRIPE -c 2 $MOUNT && error "setstripe should fail"
+ true
+}
+run_test 65m "normal user can't set filesystem default stripe"
+
# bug 2543 - update blocks count on client
test_66() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
rm -f $LLOOP
unset LLOOP
fi
- if [ ! -z "$LLITELOOPLOAD" ]; then
- rmmod llite_lloop
- unset LLITELOOPLOAD
- fi
rm -f $DIR/f68*
}
swapon -s | awk '($1 == "'$1'") { print $4 }'
}
-# test case for lloop driver, basic function
-test_68a() {
- [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- [ "$UID" != 0 ] && skip_env "must run as root" && return
- llite_lloop_enabled || \
- { skip_env "llite_lloop module disabled" && return; }
-
- trap cleanup_68 EXIT
-
- if ! module_loaded llite_lloop; then
- if load_module llite/llite_lloop; then
- LLITELOOPLOAD=yes
- else
- skip_env "can't find module llite_lloop"
- return
- fi
- fi
-
- LLOOP=$TMP/lloop.`date +%s`.`date +%N`
- dd if=/dev/zero of=$DIR/f68a bs=4k count=1024
- $LCTL blockdev_attach $DIR/f68a $LLOOP || error "attach failed"
-
- directio rdwr $LLOOP 0 1024 4096 || error "direct write failed"
- directio rdwr $LLOOP 0 1025 4096 && error "direct write should fail"
-
- cleanup_68
-}
-run_test 68a "lloop driver - basic test ========================"
-
-# excercise swapping to lustre by adding a high priority swapfile entry
-# and then consuming memory until it is used.
-test_68b() { # was test_68
- [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- [ "$UID" != 0 ] && skip_env "must run as root" && return
- lctl get_param -n devices | grep -q obdfilter && \
- skip "local OST" && return
-
- grep -q llite_lloop /proc/modules
- [ $? -ne 0 ] && skip "can't find module llite_lloop" && return
-
- [ -z "`$LCTL list_nids | grep -v tcp`" ] && \
- skip "can't reliably test swap with TCP" && return
-
- MEMTOTAL=`meminfo MemTotal`
- NR_BLOCKS=$((MEMTOTAL>>8))
- [[ $NR_BLOCKS -le 2048 ]] && NR_BLOCKS=2048
-
- LLOOP=$TMP/lloop.`date +%s`.`date +%N`
- dd if=/dev/zero of=$DIR/f68b bs=64k seek=$NR_BLOCKS count=1
- mkswap $DIR/f68b
-
- $LCTL blockdev_attach $DIR/f68b $LLOOP || error "attach failed"
-
- trap cleanup_68 EXIT
-
- swapon -p 32767 $LLOOP || error "swapon $LLOOP failed"
-
- echo "before: `swapon -s | grep $LLOOP`"
- $MEMHOG $MEMTOTAL || error "error allocating $MEMTOTAL kB"
- echo "after: `swapon -s | grep $LLOOP`"
- SWAPUSED=`swap_used $LLOOP`
-
- cleanup_68
-
- [ $SWAPUSED -eq 0 ] && echo "no swap used???" || true
-}
-run_test 68b "support swapping to Lustre ========================"
-
# bug5265, obdfilter oa2dentry return -ENOENT
# #define OBD_FAIL_SRV_ENOENT 0x217
test_69() {
test_76() { # Now for bug 20433, added originally in bug 1443
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- local SLAB_SETTINGS=`get_inode_slab_tunables`
- local CPUS=`getconf _NPROCESSORS_ONLN`
+ local SLAB_SETTINGS=$(get_inode_slab_tunables)
+ local CPUS=$(getconf _NPROCESSORS_ONLN 2>/dev/null)
# we cannot set limit below 1 which means 1 inode in each
# per-cpu cache is still allowed
set_inode_slab_tunables "1 1 0"
AFTER_INODES=$(num_inodes)
echo "after inodes: $AFTER_INODES"
local wait=0
- while [[ $((AFTER_INODES-1*CPUS)) -gt $BEFORE_INODES ]]; do
+ while [[ $((AFTER_INODES-1*${CPUS:-1})) -gt $BEFORE_INODES ]]; do
sleep 2
AFTER_INODES=$(num_inodes)
wait=$((wait+2))
}
run_test 77g "checksum error on OST write, read"
-test_77i() { # bug 13805
- [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- $GSS && skip "could not run with gss" && return
- #define OBD_FAIL_OSC_CONNECT_CKSUM 0x40b
- lctl set_param fail_loc=0x40b
- remount_client $MOUNT
- lctl set_param fail_loc=0
- for VALUE in `lctl get_param osc.*osc-[^mM]*.checksum_type`; do
- PARAM=`echo ${VALUE[0]} | cut -d "=" -f1`
- algo=`lctl get_param -n $PARAM | sed 's/.*\[\(.*\)\].*/\1/g'`
- [ "$algo" = "adler" ] || error "algo set to $algo instead of adler"
- done
- remount_client $MOUNT
-}
-run_test 77i "client not supporting OSD_CONNECT_CKSUM"
-
test_77j() { # bug 13805
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$GSS && skip "could not run with gss" && return
lctl set_param fail_loc=0x40c
remount_client $MOUNT
lctl set_param fail_loc=0
- sleep 2 # wait async osc connect to finish
- for VALUE in `lctl get_param osc.*osc-[^mM]*.checksum_type`; do
- PARAM=`echo ${VALUE[0]} | cut -d "=" -f1`
- algo=`lctl get_param -n $PARAM | sed 's/.*\[\(.*\)\].*/\1/g'`
+ # wait async osc connect to finish and reflect updated state value
+ local i
+ for (( i=0; i < OSTCOUNT; i++ )) ; do
+ wait_osc_import_state client ost$((i+1)) FULL
+ done
+
+ for VALUE in $(lctl get_param osc.*osc-[^mM]*.checksum_type); do
+ PARAM=$(echo ${VALUE[0]} | cut -d "=" -f1)
+ algo=$(lctl get_param -n $PARAM | sed 's/.*\[\(.*\)\].*/\1/g')
[ "$algo" = "adler" ] || error "algo set to $algo instead of adler"
done
remount_client $MOUNT
rm -f $F77_TMP
unset F77_TMP
+cleanup_test_78() {
+ trap 0
+ rm -f $DIR/$tfile
+}
+
test_78() { # bug 10901
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_ost || { skip_env "local OST" && return; }
[[ $SMALLESTOST -lt 10240 ]] &&
skip "too small OSTSIZE, useless to run large O_DIRECT test" && return 0
+ trap cleanup_test_78 EXIT
+
[[ $F78SIZE -gt $((SMALLESTOST * $OSTCOUNT / 1024 - 80)) ]] &&
F78SIZE=$((SMALLESTOST * $OSTCOUNT / 1024 - 80))
$DIRECTIO rdwr $DIR/$tfile 0 $FSIZE 1048576||error "rdwr failed"
done
- rm -f $DIR/$tfile
+ cleanup_test_78
}
run_test 78 "handle large O_DIRECT writes correctly ============"
test_101f() {
which iozone || { skip "no iozone installed" && return; }
+ local old_debug=$($LCTL get_param debug)
+ old_debug=${old_debug#*=}
+ $LCTL set_param debug="reada mmap"
+
# create a test file
iozone -i 0 -+n -r 1m -s 128m -w -f $DIR/$tfile > /dev/null 2>&1
$LCTL set_param -n llite.*.read_ahead_stats 0
echo mmap read the file with small block size
- iozone -i 1 -+n -r 32k -s 128m -B -f $DIR/$tfile > /dev/null 2>&1
+ iozone -i 1 -u 1 -l 1 -+n -r 32k -s 128m -B -f $DIR/$tfile \
+ > /dev/null 2>&1
echo checking missing pages
+ $LCTL get_param llite.*.read_ahead_stats
local miss=$($LCTL get_param -n llite.*.read_ahead_stats |
get_named_value 'misses' | cut -d" " -f1 | calc_total)
- [ $miss -lt 3 ] || error "misses too much pages!"
+ $LCTL set_param debug="$old_debug"
+ [ $miss -lt 3 ] || error "misses too much pages ('$miss')!"
rm -f $DIR/$tfile
}
run_test 101f "check mmap read performance"
+test_101g_brw_size_test() {
+ local mb=$1
+ local pages=$((mb * 1048576 / $(page_size)))
+
+ $LCTL set_param osc.*.max_pages_per_rpc=${mb}M ||
+ { error "unable to set max_pages_per_rpc=${mb}M"; return 1; }
+ for mp in $($LCTL get_param -n osc.*.max_pages_per_rpc); do
+ [ $mp -ne $pages ] && error "max_pages_per_rpc $mp != $pages" &&
+ return 2
+ done
+
+ $LCTL set_param -n osc.*.rpc_stats=0
+
+ # 10 RPCs should be enough for the test
+ local count=10
+ dd if=/dev/zero of=$DIR/$tfile bs=${mb}M count=$count ||
+ { error "dd write ${mb} MB blocks failed"; return 3; }
+ cancel_lru_locks osc
+ dd of=/dev/null if=$DIR/$tfile bs=${mb}M count=$count ||
+ { error "dd write ${mb} MB blocks failed"; return 4; }
+
+ # calculate number of full-sized read and write RPCs
+ rpcs=($($LCTL get_param -n 'osc.*.rpc_stats' |
+ sed -n '/pages per rpc/,/^$/p' |
+ awk '/'$pages':/ { reads += $2; writes += $5 };' \
+ 'END { print reads,writes }'))
+ [ ${rpcs[0]} -ne $count ] && error "${rpcs[0]} != $count read RPCs" &&
+ return 5
+ [ ${rpcs[1]} -ne $count ] && error "${rpcs[1]} != $count write RPCs" &&
+ return 6
+
+ return 0
+}
+
test_101g() {
local rpcs
local osts=$(get_facets OST)
local list=$(comma_list $(osts_nodes))
local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
+ local brw_size="obdfilter.*.brw_size"
- save_lustre_params $osts "obdfilter.*.brw_size" > $p
-
- $LFS setstripe -c 1 $DIR/$tfile
+ $LFS setstripe -i 0 -c 1 $DIR/$tfile
+ local orig_mb=$(do_facet ost1 $LCTL get_param -n $brw_size | head -n 1)
if [ $(lustre_version_code ost1) -ge $(version_code 2.8.52) ]; then
- set_osd_param $list '' brw_size 16M
-
- echo "remount client to enable large RPC size"
- remount_client $MOUNT || error "remount_client failed"
-
- for mp in $($LCTL get_param -n osc.*.max_pages_per_rpc); do
- [ "$mp" -eq 4096 ] ||
- error "max_pages_per_rpc not correctly set"
- done
-
- $LCTL set_param -n osc.*.rpc_stats=0
-
- # 10*16 MiB should be enough for the test
- dd if=/dev/zero of=$DIR/$tfile bs=16M count=10
- cancel_lru_locks osc
- dd of=/dev/null if=$DIR/$tfile bs=16M count=10
+ [ $(lustre_version_code ost1) -ge $(version_code 2.9.52) ] &&
+ suffix="M"
+ if [[ $orig_mb < 16 ]]; then
+ save_lustre_params $osts "$brw_size" > $p
+ do_nodes $list $LCTL set_param -n $brw_size=16$suffix ||
+ error "set 16MB RPC size failed"
+
+ echo "remount client to enable new RPC size"
+ remount_client $MOUNT || error "remount_client failed"
+ fi
- # calculate 16 MiB RPCs
- rpcs=$($LCTL get_param 'osc.*.rpc_stats' |
- sed -n '/pages per rpc/,/^$/p' |
- awk 'BEGIN { sum = 0 }; /4096:/ { sum += $2 };
- END { print sum }')
- echo $rpcs RPCs
- [ "$rpcs" -eq 10 ] || error "not all RPCs are 16 MiB BRW rpcs"
+ test_101g_brw_size_test 16 || error "16MB RPC test failed"
+ # should be able to set brw_size=12, but no rpc_stats for that
+ test_101g_brw_size_test 8 || error "8MB RPC test failed"
fi
- echo "set RPC size to 4MB"
-
- $LCTL set_param -n osc.*.max_pages_per_rpc=4M osc.*.rpc_stats=0
- dd if=/dev/zero of=$DIR/$tfile bs=4M count=25
- cancel_lru_locks osc
- dd of=/dev/null if=$DIR/$tfile bs=4M count=25
-
- # calculate 4 MiB RPCs
- rpcs=$($LCTL get_param 'osc.*.rpc_stats' |
- sed -n '/pages per rpc/,/^$/p' |
- awk 'BEGIN { sum = 0 }; /1024:/ { sum += $2 };
- END { print sum }')
- echo $rpcs RPCs
- [ "$rpcs" -eq 25 ] || error "not all RPCs are 4 MiB BRW rpcs"
+ test_101g_brw_size_test 4 || error "4MB RPC test failed"
- restore_lustre_params < $p
- remount_client $MOUNT || error "remount_client failed"
+ if [[ $orig_mb < 16 ]]; then
+ restore_lustre_params < $p
+ remount_client $MOUNT || error "remount_client restore failed"
+ fi
rm -f $p $DIR/$tfile
}
}
test_102n() { # LU-4101 mdt: protect internal xattrs
- local file0=$DIR/$tfile.0
- local file1=$DIR/$tfile.1
- local xattr0=$TMP/$tfile.0
- local xattr1=$TMP/$tfile.1
- local name
- local value
-
[ -z "$(which setfattr 2>/dev/null)" ] &&
skip "could not find setfattr" && return
-
if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.5.50) ]
then
skip "MDT < 2.5.50 allows setxattr on internal trusted xattrs"
return
fi
+ local file0=$DIR/$tfile.0
+ local file1=$DIR/$tfile.1
+ local xattr0=$TMP/$tfile.0
+ local xattr1=$TMP/$tfile.1
+ local namelist="lov lma lmv link fid version som hsm"
+ local name
+ local value
+
rm -rf $file0 $file1 $xattr0 $xattr1
touch $file0 $file1
# Get 'before' xattrs of $file1.
getfattr --absolute-names --dump --match=- $file1 > $xattr0
- for name in lov lma lmv link fid version som hsm; do
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.53) ] &&
+ namelist+=" lfsck_namespace"
+ for name in $namelist; do
# Try to copy xattr from $file0 to $file1.
value=$(getxattr $file0 trusted.$name 2> /dev/null)
[ -z "$(which setfacl 2>/dev/null)" ] &&
skip_env "could not find setfacl" && return
$GSS && skip "could not run under gss" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
gpasswd -a daemon bin # LU-5641
do_facet $SINGLEMDS gpasswd -a daemon bin # LU-5641
SAVE_UMASK=$(umask)
umask 0022
- cd $DIR
+ mkdir -p $DIR/$tdir
+ cd $DIR/$tdir
echo "performing cp ..."
run_acl_subtest cp || error "run_acl_subtest cp failed"
run_acl_subtest misc || error "misc test failed"
echo "performing permissions..."
run_acl_subtest permissions || error "permissions failed"
+ # LU-1482 mdd: Setting xattr are properly checked with and without ACLs
+ if [ $(lustre_version_code $SINGLEMDS) -gt $(version_code 2.8.55) -o \
+ \( $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.6) -a \
+ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.5.29) \) ]
+ then
+ echo "performing permissions xattr..."
+ run_acl_subtest permissions_xattr ||
+ error "permissions_xattr failed"
+ fi
echo "performing setfacl..."
run_acl_subtest setfacl || error "setfacl test failed"
run_test 103a "acl test ========================================="
test_103b() {
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
local noacl=false
local MDT_DEV=$(mdsdevname ${SINGLEMDS//mds/})
local mountopts=$MDS_MOUNT_OPTS
free_min_max () {
wait_delete_completed
AVAIL=($(lctl get_param -n osc.*[oO][sS][cC]-[^M]*.kbytesavail))
- echo OST kbytes available: ${AVAIL[@]}
- MAXI=0; MAXV=${AVAIL[0]}
- MINI=0; MINV=${AVAIL[0]}
+ echo "OST kbytes available: ${AVAIL[@]}"
+ MAXV=${AVAIL[0]}
+ MAXI=0
+ MINV=${AVAIL[0]}
+ MINI=0
for ((i = 0; i < ${#AVAIL[@]}; i++)); do
#echo OST $i: ${AVAIL[i]}kb
if [[ ${AVAIL[i]} -gt $MAXV ]]; then
- MAXV=${AVAIL[i]}; MAXI=$i
+ MAXV=${AVAIL[i]}
+ MAXI=$i
fi
if [[ ${AVAIL[i]} -lt $MINV ]]; then
- MINV=${AVAIL[i]}; MINI=$i
+ MINV=${AVAIL[i]}
+ MINI=$i
fi
done
- echo Min free space: OST $MINI: $MINV
- echo Max free space: OST $MAXI: $MAXV
+ echo "Min free space: OST $MINI: $MINV"
+ echo "Max free space: OST $MAXI: $MAXV"
}
test_116a() { # was previously test_116()
# Check if we need to generate uneven OSTs
test_mkdir -p $DIR/$tdir/OST${MINI}
- local FILL=$(($MINV / 4))
- local DIFF=$(($MAXV - $MINV))
- local DIFF2=$(($DIFF * 100 / $MINV))
+ local FILL=$((MINV / 4))
+ local DIFF=$((MAXV - MINV))
+ local DIFF2=$((DIFF * 100 / MINV))
local threshold=$(do_facet $SINGLEMDS \
lctl get_param -n *.*MDT0000-mdtlov.qos_threshold_rr | head -n1)
else
# generate uneven OSTs. Write 2% over the QOS threshold value
echo "no"
- DIFF=$(($threshold - $DIFF2 + 2))
- DIFF2=$(( ($MINV * $DIFF)/100 ))
- echo "Fill ${DIFF}% remaining space in OST${MINI} with ${DIFF2}KB"
+ DIFF=$((threshold - DIFF2 + 2))
+ DIFF2=$((MINV * DIFF / 100))
+ echo "Fill $DIFF% remaining space in OST$MINI with ${DIFF2}KB"
$SETSTRIPE -i $MINI -c 1 $DIR/$tdir/OST${MINI} ||
error "setstripe failed"
- DIFF=$(($DIFF2 / 2048))
+ DIFF=$((DIFF2 / 2048))
i=0
while [ $i -lt $DIFF ]; do
- i=$(($i + 1))
+ i=$((i + 1))
dd if=/dev/zero of=$DIR/$tdir/OST${MINI}/$tfile-$i \
bs=2M count=1 2>/dev/null
echo -n .
free_min_max
fi
- DIFF=$(($MAXV - $MINV))
- DIFF2=$(($DIFF * 100 / $MINV))
- echo -n "diff=${DIFF}=${DIFF2}% must be > ${threshold}% for QOS mode..."
- if [[ $DIFF2 -gt $threshold ]]; then
+ DIFF=$((MAXV - MINV))
+ DIFF2=$((DIFF * 100 / MINV))
+ echo -n "diff=$DIFF=$DIFF2% must be > $threshold% for QOS mode..."
+ if [ $DIFF2 -gt $threshold ]; then
echo "ok"
else
echo "failed - QOS mode won't be used"
return
fi
- MINI1=$MINI; MINV1=$MINV
- MAXI1=$MAXI; MAXV1=$MAXV
+ MINI1=$MINI
+ MINV1=$MINV
+ MAXI1=$MAXI
+ MAXV1=$MAXV
# now fill using QOS
$SETSTRIPE -c 1 $DIR/$tdir
- FILL=$(($FILL / 200))
+ FILL=$((FILL / 200))
if [ $FILL -gt 600 ]; then
FILL=600
fi
echo "Note: free space may not be updated, so measurements might be off"
free_min_max
- DIFF2=$(($MAXV - $MINV))
+ DIFF2=$((MAXV - MINV))
echo "free space delta: orig $DIFF final $DIFF2"
[ $DIFF2 -gt $DIFF ] && echo "delta got worse!"
- DIFF=$(($MINV1 - ${AVAIL[$MINI1]}))
+ DIFF=$((MINV1 - ${AVAIL[$MINI1]}))
echo "Wrote ${DIFF}KB to smaller OST $MINI1"
- DIFF2=$(($MAXV1 - ${AVAIL[$MAXI1]}))
+ DIFF2=$((MAXV1 - ${AVAIL[$MAXI1]}))
echo "Wrote ${DIFF2}KB to larger OST $MAXI1"
- FILL=$(($DIFF2 * 100 / $DIFF - 100))
- [ $DIFF -gt 0 ] &&
+ if [[ $DIFF -gt 0 ]]; then
+ FILL=$((DIFF2 * 100 / DIFF - 100))
echo "Wrote ${FILL}% more data to larger OST $MAXI1"
+ fi
# Figure out which files were written where
UUID=$(lctl get_param -n lov.${FSNAME}-clilov-*.target_obd |
- awk '/'$MINI1': / {print $2; exit}')
+ awk '/'$MINI1': / {print $2; exit}')
echo $UUID
MINC=$($GETSTRIPE --ost $UUID $DIR/$tdir | grep $DIR | wc -l)
echo "$MINC files created on smaller OST $MINI1"
UUID=$(lctl get_param -n lov.${FSNAME}-clilov-*.target_obd |
- awk '/'$MAXI1': / {print $2; exit}')
+ awk '/'$MAXI1': / {print $2; exit}')
echo $UUID
MAXC=$($GETSTRIPE --ost $UUID $DIR/$tdir | grep $DIR | wc -l)
echo "$MAXC files created on larger OST $MAXI1"
- FILL=$(($MAXC * 100 / $MINC - 100))
- [[ $MINC -gt 0 ]] &&
+ if [[ $MINC -gt 0 ]]; then
+ FILL=$((MAXC * 100 / MINC - 100))
echo "Wrote ${FILL}% more files to larger OST $MAXI1"
+ fi
[[ $MAXC -gt $MINC ]] ||
error_ignore LU-9 "stripe QOS didn't balance free space"
simple_cleanup_common
test_120a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
test_mkdir -p $DIR/$tdir
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
test_120b() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
test_mkdir $DIR/$tdir
[ -z "$(lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel)" ] && \
skip "no early lock cancel on server" && return 0
test_120c() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
test_mkdir -c1 $DIR/$tdir
[ -z "$(lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel)" ] && \
skip "no early lock cancel on server" && return 0
test_120d() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
test_mkdir -p -c1 $DIR/$tdir
[ -z "$(lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel)" ] && \
skip "no early lock cancel on server" && return 0
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
! $($LCTL get_param -n mdc.*.connect_flags | grep -q early_lock_can) &&
skip "no early lock cancel on server" && return 0
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
local dlmtrace_set=false
test_mkdir -p -c1 $DIR/$tdir
stat $DIR/$tdir $DIR/$tdir/f1 > /dev/null
# XXX client can not do early lock cancel of OST lock
# during unlink (LU-4206), so cancel osc lock now.
+ sleep 2
cancel_lru_locks osc
can1=$(do_facet $SINGLEMDS \
"$LCTL get_param -n ldlm.services.ldlm_canceld.stats" |
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
test_mkdir -p -c1 $DIR/$tdir
lru_resize_disable mdc
lru_resize_disable osc
stat $DIR/$tdir/d1 $DIR/$tdir/d2 $DIR/$tdir/d1/f1 $DIR/$tdir/d2/f2 > /dev/null
# XXX client can not do early lock cancel of OST lock
# during rename (LU-4206), so cancel osc lock now.
+ sleep 2
cancel_lru_locks osc
can1=$(do_facet $SINGLEMDS \
"$LCTL get_param -n ldlm.services.ldlm_canceld.stats" |
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
lru_resize_disable mdc
lru_resize_disable osc
count=10000
NR=$(($(default_lru_size)*20))
if [[ $NR -gt $LIMIT ]]; then
- log "Limit lock number by $LIMIT locks"
- NR=$LIMIT
- fi
- lru_resize_disable mdc
- test_mkdir -p $DIR/$tdir/disable_lru_resize ||
+ log "Limit lock number by $LIMIT locks"
+ NR=$LIMIT
+ fi
+
+ IFree=$(mdsrate_inodes_available)
+ if [ $IFree -lt $NR ]; then
+ log "Limit lock number by $IFree inodes"
+ NR=$IFree
+ fi
+
+ lru_resize_disable mdc
+ test_mkdir -p $DIR/$tdir/disable_lru_resize ||
error "failed to create $DIR/$tdir/disable_lru_resize"
createmany -o $DIR/$tdir/disable_lru_resize/f $NR
return
fi
remote_mds_nodsh && skip "remote MDS with nodsh" && return
- ENOSPC=28
- EFBIG=27
- has_warning=0
+ local ENOSPC=28
+ local EFBIG=27
+ local has_warning=0
rm -rf $DIR/$tdir
mkdir -p $DIR/$tdir
check_mds_dmesg '"has reached"' ||
error_exit "has reached message should be output"
- [ $has_warning ] ||
+ [ $has_warning -eq 0 ] &&
error_exit "warning message should be output"
I=$(stat -c%s "$DIR/$tdir")
# verify mdt stats first.
mkdir ${testdir} || error "mkdir failed"
check_stats $SINGLEMDS "mkdir" 1
- touch ${testdir}/${tfile} || "touch failed"
+ touch ${testdir}/${tfile} || error "touch failed"
check_stats $SINGLEMDS "open" 1
check_stats $SINGLEMDS "close" 1
- mknod ${testdir}/${tfile}-pipe p || "mknod failed"
- check_stats $SINGLEMDS "mknod" 1
- rm -f ${testdir}/${tfile}-pipe || "pipe remove failed"
+ [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.8.54) ] && {
+ mknod ${testdir}/${tfile}-pipe p || error "mknod failed"
+ check_stats $SINGLEMDS "mknod" 2
+ }
+ rm -f ${testdir}/${tfile}-pipe || error "pipe remove failed"
check_stats $SINGLEMDS "unlink" 1
rm -f ${testdir}/${tfile} || error "file remove failed"
check_stats $SINGLEMDS "unlink" 2
remote_mds_nodsh && skip "remote MDS with nodsh" && return
local testdir=$DIR/${tdir}/stats_testdir
mkdir -p ${testdir} || error "mkdir failed"
- touch ${testdir}/${tfile} || "touch failed"
+ touch ${testdir}/${tfile} || error "touch failed"
cancel_lru_locks mdc
# clear stats.
run_test 133f "Check for LBUGs/Oopses/unreadable files in /proc"
test_133g() {
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
# Second verifying writability.
find $proc_dirs \
-type f \
run_test 133g "Check for Oopses on bad io area writes/reads in /proc"
test_134a() {
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
[[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.54) ]] &&
skip "Need MDS version at least 2.7.54" && return
local nsdir="ldlm.namespaces.*-MDT0000-mdc-*"
local unused=$($LCTL get_param -n $nsdir.lock_unused_count)
- [ $unused -eq 0 ] || "$unused locks are not cleared"
+ [ $unused -eq 0 ] || error "$unused locks are not cleared"
local nr=1000
createmany -o $DIR/$tdir/f $nr ||
run_test 134a "Server reclaims locks when reaching lock_reclaim_threshold"
test_134b() {
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
[[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.54) ]] &&
skip "Need MDS version at least 2.7.54" && return
test_140() { #bug-17379
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- test_mkdir -p $DIR/$tdir || error "Creating dir $DIR/$tdir"
- cd $DIR/$tdir || error "Changing to $DIR/$tdir"
- cp /usr/bin/stat . || error "Copying stat to $DIR/$tdir"
+ test_mkdir -p $DIR/$tdir || error "Creating dir $DIR/$tdir"
+ cd $DIR/$tdir || error "Changing to $DIR/$tdir"
+ cp $(which stat) . || error "Copying stat to $DIR/$tdir"
# VFS limits max symlink depth to 5(4KSTACK) or 7(8KSTACK) or 8
# For kernel > 3.5, bellow only tests consecutive symlink (MAX 40)
[[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.1) ]] &&
skip "Need MDS version at least 2.4.1" && return
- touch $DIR/$tfile
- local FID=$($LFS path2fid $DIR/$tfile)
- [ -z "$FID" ] && error "path2fid unable to get $DIR/$tfile FID"
+ local tf=$DIR/$tfile
+ touch $tf
- # check that we get the same pathname back
- local FOUND=$($LFS fid2path $MOUNT "$FID")
- [ -z "$FOUND" ] && error "fid2path unable to get $FID path"
- [ "$FOUND" != "$DIR/$tfile" ] &&
- error "fid2path(path2fid($DIR/$tfile)) = $FOUND != $DIR/$tfile"
+ local fid=$($LFS path2fid $tf)
+ [ -z "$fid" ] && error "path2fid unable to get $tf FID"
- rm -rf $DIR/$tfile
+ # check that we get the same pathname back
+ local found=$($LFS fid2path $MOUNT "$fid")
+ [ -z "$found" ] && error "fid2path unable to get '$fid' path"
+ [ "$found" == "$tf" ] ||
+ error "fid2path($fid=path2fid($tf)) = $found != $tf"
}
run_test 154A "lfs path2fid and fid2path basic checks"
+test_154B() {
+ [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.1) ]] &&
+ skip "Need MDS version at least 2.4.1" && return
+
+ mkdir -p $DIR/$tdir || error "mkdir $tdir failed"
+ touch $DIR/$tdir/$tfile || error "touch $DIR/$tdir/$tfile failed"
+ local linkea=$($LL_DECODE_LINKEA $DIR/$tdir/$tfile | grep 'pfid')
+ [ -z "$linkea" ] && error "decode linkea $DIR/$tdir/$tfile failed"
+
+ local name=$(echo $linkea | awk '/pfid/ {print $5}' | sed -e "s/'//g")
+ local PFID=$(echo $linkea | awk '/pfid/ {print $3}' | sed -e "s/,//g")
+
+ # check that we get the same pathname
+ echo "PFID: $PFID, name: $name"
+ local FOUND=$($LFS fid2path $MOUNT "$PFID")
+ [ -z "$FOUND" ] && error "fid2path unable to get $PFID path"
+ [ "$FOUND/$name" != "$DIR/$tdir/$tfile" ] &&
+ error "ll_decode_linkea has $FOUND/$name != $DIR/$tdir/$tfile"
+
+ rm -rf $DIR/$tdir || error "Can not delete directory $DIR/$tdir"
+}
+run_test 154B "verify the ll_decode_linkea tool"
+
test_154a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.51) ]] ||
run_test 154c "lfs path2fid and fid2path multiple arguments"
test_154d() {
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
[[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.5.53) ]] &&
skip "Need MDS version at least 2.5.53" && return
true
}
+save_writethrough() {
+ local facets=$(get_facets OST)
+
+ save_lustre_params $facets "obdfilter.*.writethrough_cache_enable" > $1
+ save_lustre_params $facets "osd-*.*.writethrough_cache_enable" >> $1
+}
+
test_155a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
+ save_writethrough $p
+
set_cache read on
set_cache writethrough on
test_155_small_load
+ restore_lustre_params < $p
+ rm -f $p
}
run_test 155a "Verify small file correctness: read cache:on write_cache:on"
test_155b() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
+ save_writethrough $p
+
set_cache read on
set_cache writethrough off
test_155_small_load
+ restore_lustre_params < $p
+ rm -f $p
}
run_test 155b "Verify small file correctness: read cache:on write_cache:off"
test_155c() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
+ save_writethrough $p
+
set_cache read off
set_cache writethrough on
test_155_small_load
+ restore_lustre_params < $p
+ rm -f $p
}
run_test 155c "Verify small file correctness: read cache:off write_cache:on"
test_155d() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
+ save_writethrough $p
+
set_cache read off
set_cache writethrough off
test_155_small_load
+ restore_lustre_params < $p
+ rm -f $p
}
run_test 155d "Verify small file correctness: read cache:off write_cache:off"
test_155e() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
+ save_writethrough $p
+
set_cache read on
set_cache writethrough on
test_155_big_load
+ restore_lustre_params < $p
+ rm -f $p
}
run_test 155e "Verify big file correctness: read cache:on write_cache:on"
test_155f() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
+ save_writethrough $p
+
set_cache read on
set_cache writethrough off
test_155_big_load
+ restore_lustre_params < $p
+ rm -f $p
}
run_test 155f "Verify big file correctness: read cache:on write_cache:off"
test_155g() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- set_cache read off
+ local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
+ save_writethrough $p
+
+ set_cache read off
set_cache writethrough on
test_155_big_load
+ restore_lustre_params < $p
+ rm -f $p
}
run_test 155g "Verify big file correctness: read cache:off write_cache:on"
test_155h() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
+ save_writethrough $p
+
set_cache read off
set_cache writethrough off
test_155_big_load
+ restore_lustre_params < $p
+ rm -f $p
}
run_test 155h "Verify big file correctness: read cache:off write_cache:off"
local BEFORE
local AFTER
local file="$DIR/$tfile"
+ local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
[ "$(facet_fstype ost1)" = "zfs" -a \
$(lustre_version_code ost1 -lt $(version_code 2.6.93)) ] &&
skip "LU-1956/LU-2261: stats not implemented on OSD ZFS" &&
return
+ save_writethrough $p
roc_hit_init
log "Turn on read and write cache"
fi
rm -f $file
+ restore_lustre_params < $p
+ rm -f $p
}
run_test 156 "Verification of tunables"
#Changelogs
+cleanup_changelog () {
+ trap 0
+ echo "Deregistering changelog client $CL_USER"
+ do_facet $SINGLEMDS $LCTL --device $MDT0 changelog_deregister $CL_USER
+}
+
err17935 () {
if [[ $MDSCOUNT -gt 1 ]]; then
error_ignore bz17935 $*
local CL_USERS="mdd.$MDT0.changelog_users"
local GET_CL_USERS="do_facet $SINGLEMDS $LCTL get_param -n $CL_USERS"
- USER=$(do_facet $SINGLEMDS $LCTL --device $MDT0 changelog_register -n)
- echo "Registered as changelog user $USER"
- $GET_CL_USERS | grep -q $USER ||
- error "User $USER not found in changelog_users"
+ CL_USER=$(do_facet $SINGLEMDS $LCTL --device $MDT0 \
+ changelog_register -n)
+ echo "Registered as changelog user $CL_USER"
+ trap cleanup_changelog EXIT
+ $GET_CL_USERS | grep -q $CL_USER ||
+ error "User $CL_USER not found in changelog_users"
# change something
test_mkdir -p $DIR/$tdir/pics/2008/zachy
[ "$fidc" == "$fidf" ] ||
err17935 "pfid in changelog $fidc != dir fid $fidf"
- USER_REC1=$($GET_CL_USERS | awk "\$1 == \"$USER\" {print \$2}")
- $LFS changelog_clear $MDT0 $USER $(($USER_REC1 + 5))
- USER_REC2=$($GET_CL_USERS | awk "\$1 == \"$USER\" {print \$2}")
+ USER_REC1=$($GET_CL_USERS | awk "\$1 == \"$CL_USER\" {print \$2}")
+ $LFS changelog_clear $MDT0 $CL_USER $(($USER_REC1 + 5))
+ USER_REC2=$($GET_CL_USERS | awk "\$1 == \"$CL_USER\" {print \$2}")
echo "verifying user clear: $(( $USER_REC1 + 5 )) == $USER_REC2"
[ $USER_REC2 == $(($USER_REC1 + 5)) ] ||
err17935 "user index expected $(($USER_REC1 + 5)) is $USER_REC2"
# LU-3446 changelog index reset on MDT restart
local MDT_DEV=$(mdsdevname ${SINGLEMDS//mds/})
CUR_REC1=$($GET_CL_USERS | head -n1 | cut -f3 -d' ')
- $LFS changelog_clear $MDT0 $USER 0
+ $LFS changelog_clear $MDT0 $CL_USER 0
stop $SINGLEMDS || error "Fail to stop MDT."
start $SINGLEMDS $MDT_DEV $MDS_MOUNT_OPTS || error "Fail to start MDT."
CUR_REC2=$($GET_CL_USERS | head -n1 | cut -f3 -d' ')
err17935 "current index should be $CUR_REC1 is $CUR_REC2"
echo "verifying user deregister"
- do_facet $SINGLEMDS $LCTL --device $MDT0 changelog_deregister $USER
- $GET_CL_USERS | grep -q $USER &&
- error "User $USER still in changelog_users"
+ cleanup_changelog
+ $GET_CL_USERS | grep -q $CL_USER &&
+ error "User $CL_USER still in changelog_users"
USERS=$(( $($GET_CL_USERS | wc -l) - 2 ))
- if [ $USERS -eq 0 ]; then
+ if [ $CL_USER -eq 0 ]; then
LAST_REC1=$($GET_CL_USERS | head -n1 | cut -f3 -d' ')
touch $DIR/$tdir/chloe
LAST_REC2=$($GET_CL_USERS | head -n1 | cut -f3 -d' ')
echo "verify changelogs are off: $LAST_REC1 == $LAST_REC2"
[ $LAST_REC1 == $LAST_REC2 ] || error "changelogs not off"
else
- echo "$USERS other changelog users; can't verify off"
+ echo "$CL_USER other changelog users; can't verify off"
fi
}
run_test 160a "changelog sanity"
local CL_USERS="mdd.$MDT0.changelog_users"
local GET_CL_USERS="do_facet $SINGLEMDS $LCTL get_param -n $CL_USERS"
- USER=$(do_facet $SINGLEMDS $LCTL --device $MDT0 changelog_register -n)
- echo "Registered as changelog user $USER"
- $GET_CL_USERS | grep -q $USER ||
- error "User $USER not found in changelog_users"
+ CL_USER=$(do_facet $SINGLEMDS $LCTL --device $MDT0 \
+ changelog_register -n)
+ echo "Registered as changelog user $CL_USER"
+ trap cleanup_changelog EXIT
+ $GET_CL_USERS | grep -q $CL_USER ||
+ error "User $CL_USER not found in changelog_users"
local LONGNAME1=$(str_repeat a 255)
local LONGNAME2=$(str_repeat b 255)
mv $LONGNAME1 $LONGNAME2
$LFS changelog $MDT0 | grep RENME
-
- echo "deregistering $USER"
- do_facet $SINGLEMDS $LCTL --device $MDT0 changelog_deregister $USER
-
rm -f $LONGNAME2
+ cleanup_changelog
}
run_test 160b "Verify that very long rename doesn't crash in changelog"
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
# Registration step
- local USER=$(do_facet $SINGLEMDS $LCTL --device $MDT0 \
+ CL_USER=$(do_facet $SINGLEMDS $LCTL --device $MDT0 \
changelog_register -n)
+ trap cleanup_changelog EXIT
rm -rf $DIR/$tdir
mkdir -p $DIR/$tdir
$LFS changelog $MDT0
TRUNCS=$($LFS changelog $MDT0 | tail -5 | grep -c "TRUNC")
[ $TRUNCS -eq 1 ] || err17935 "TRUNC changelog mask count $TRUNCS != 1"
- $LFS changelog_clear $MDT0 $USER 0
+ $LFS changelog_clear $MDT0 $CL_USER 0
# Deregistration step
- echo "deregistering $USER"
- do_facet $SINGLEMDS $LCTL --device $MDT0 changelog_deregister $USER
+ cleanup_changelog
}
run_test 160c "verify that changelog log catch the truncate event"
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
# Registration step
- local USER=$(do_facet mds1 $LCTL --device $MDT0 \
+ CL_USER=$(do_facet mds1 $LCTL --device $MDT0 \
changelog_register -n)
+ trap cleanup_changelog EXIT
mkdir -p $DIR/$tdir/migrate_dir
- $LFS changelog_clear $MDT0 $USER 0
+ $LFS changelog_clear $MDT0 $CL_USER 0
$LFS migrate -m 1 $DIR/$tdir/migrate_dir || error "migrate fails"
$LFS changelog $MDT0
MIGRATES=$($LFS changelog $MDT0 | tail -5 | grep -c "MIGRT")
- $LFS changelog_clear $MDT0 $USER 0
+ $LFS changelog_clear $MDT0 $CL_USER 0
[ $MIGRATES -eq 1 ] ||
error "MIGRATE changelog mask count $MIGRATES != 1"
# Deregistration step
- do_facet mds1 $LCTL --device $MDT0 changelog_deregister $USER
+ cleanup_changelog
}
run_test 160d "verify that changelog log catch the migrate event"
+test_160e() {
+ # Create a user
+ CL_USER=$(do_facet $SINGLEMDS $LCTL --device $MDT0 \
+ changelog_register -n)
+ echo "Registered as changelog user $CL_USER"
+ trap cleanup_changelog EXIT
+
+ # Delete a future user (expect fail)
+ do_facet $SINGLEMDS $LCTL --device $MDT0 changelog_deregister cl77
+ local rc=$?
+
+ if [ $rc -eq 0 ]; then
+ error "Deleted non-existant user cl77"
+ elif [ $rc -ne 2 ]; then
+ error "changelog_deregister failed with $rc, " \
+ "expected 2 (ENOENT)"
+ fi
+
+ # Clear to a bad index (1 billion should be safe)
+ $LFS changelog_clear $MDT0 $CL_USER 1000000000
+ rc=$?
+
+ if [ $rc -eq 0 ]; then
+ error "Successfully cleared to invalid CL index"
+ elif [ $rc -ne 22 ]; then
+ error "changelog_clear failed with $rc, expected 22 (EINVAL)"
+ fi
+}
+run_test 160e "changelog negative testing"
+
test_161a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
test_mkdir -p -c1 $DIR/$tdir
# define CLF_RENAME_LAST 0x0001
# rename overwrite a target having nlink = 1 (changelog flag 0x1)
- local USER=$(do_facet $SINGLEMDS $LCTL --device $MDT0 \
+ CL_USER=$(do_facet $SINGLEMDS $LCTL --device $MDT0 \
changelog_register -n)
+
+ trap cleanup_changelog EXIT
rm -rf $DIR/$tdir
mkdir -p $DIR/$tdir
touch $DIR/$tdir/foo_161c
$LFS changelog $MDT0 | grep RENME
local flags=$($LFS changelog $MDT0 | grep RENME | tail -1 | \
cut -f5 -d' ')
- $LFS changelog_clear $MDT0 $USER 0
+ $LFS changelog_clear $MDT0 $CL_USER 0
if [ x$flags != "x0x1" ]; then
- do_facet $SINGLEMDS $LCTL --device $MDT0 changelog_deregister \
- $USER
error "flag $flags is not 0x1"
fi
echo "rename overwrite a target having nlink = 1," \
mv -f $DIR/$tdir/foo_161c $DIR/$tdir/bar_161c
$LFS changelog $MDT0 | grep RENME
flags=$($LFS changelog $MDT0 | grep RENME | tail -1 | cut -f5 -d' ')
- $LFS changelog_clear $MDT0 $USER 0
+ $LFS changelog_clear $MDT0 $CL_USER 0
if [ x$flags != "x0x0" ]; then
- do_facet $SINGLEMDS $LCTL --device $MDT0 changelog_deregister \
- $USER
error "flag $flags is not 0x0"
fi
echo "rename overwrite a target having nlink > 1," \
mv -f $DIR/$tdir/foo_161c $DIR/$tdir/foo2_161c
$LFS changelog $MDT0 | grep RENME
flags=$($LFS changelog $MDT0 | grep RENME | tail -1 | cut -f5 -d' ')
- $LFS changelog_clear $MDT0 $USER 0
+ $LFS changelog_clear $MDT0 $CL_USER 0
if [ x$flags != "x0x0" ]; then
- do_facet $SINGLEMDS $LCTL --device $MDT0 changelog_deregister \
- $USER
error "flag $flags is not 0x0"
fi
echo "rename doesn't overwrite a target," \
rm -f $DIR/$tdir/foo2_161c
$LFS changelog $MDT0 | grep UNLNK
flags=$($LFS changelog $MDT0 | grep UNLNK | tail -1 | cut -f5 -d' ')
- $LFS changelog_clear $MDT0 $USER 0
+ $LFS changelog_clear $MDT0 $CL_USER 0
if [ x$flags != "x0x1" ]; then
- do_facet $SINGLEMDS $LCTL --device $MDT0 changelog_deregister \
- $USER
error "flag $flags is not 0x1"
fi
echo "unlink a file having nlink = 1," \
rm -f $DIR/$tdir/foobar_161c
$LFS changelog $MDT0 | grep UNLNK
flags=$($LFS changelog $MDT0 | grep UNLNK | tail -1 | cut -f5 -d' ')
- $LFS changelog_clear $MDT0 $USER 0
+ $LFS changelog_clear $MDT0 $CL_USER 0
if [ x$flags != "x0x0" ]; then
- do_facet $SINGLEMDS $LCTL --device $MDT0 changelog_deregister \
- $USER
error "flag $flags is not 0x0"
fi
echo "unlink a file having nlink > 1," \
"changelog record has flags of $flags"
- do_facet $SINGLEMDS $LCTL --device $MDT0 changelog_deregister $USER
+ cleanup_changelog
}
run_test 161c "check CL_RENME[UNLINK] changelog record flags"
run_test 184b "Forbidden layout swap (will generate errors)"
test_184c() {
+ local cmpn_arg=$(cmp -n 2>&1 | grep "invalid option")
+ [ -n "$cmpn_arg" ] && skip_env "cmp does not support -n" && return
check_swap_layouts_support && return 0
local dir0=$DIR/$tdir/$testnum
break
done
- cleanup_pools
+ destroy_test_pools
return $rc
}
run_test 200 "OST pools"
}
cleanup_205() {
+ trap 0
do_facet $SINGLEMDS \
$LCTL set_param mdt.*.job_cleanup_interval=$OLD_INTERVAL
[ $OLD_JOBENV != $JOBENV ] && jobstats_set $OLD_JOBENV
- do_facet $SINGLEMDS lctl --device $MDT0 changelog_deregister $CL_USER
+ cleanup_changelog
}
test_205() { # Job stats
cmd="mv -f $DIR/$tfile $DIR/$tdir.rename"
verify_jobstats "$cmd" "$SINGLEMDS"
# jobstats expiry - sleep until old stats should be expired
- local left=$((interval_new + 2 - (SECONDS - start)))
- [ $left -ge 0 ] && echo "sleep $left for expiry" && sleep $((left + 1))
+ local left=$((interval_new + 5 - (SECONDS - start)))
+ [ $left -ge 0 ] && wait_update_facet $SINGLEMDS \
+ "lctl get_param *.*.job_stats | grep -c 'job_id.*mkdir'" \
+ "0" $left
cmd="mkdir $DIR/$tdir.expire"
verify_jobstats "$cmd" "$SINGLEMDS"
[ $(do_facet $SINGLEMDS lctl get_param *.*.job_stats |
do_facet ost$((OSTIDX + 1)) lctl set_param fail_val=-1
#define OBD_FAIL_OST_ENOINO 0x229
do_facet ost$((OSTIDX + 1)) lctl set_param fail_loc=0x229
- do_facet mgs $LCTL pool_new $FSNAME.$TESTNAME || return 1
+ create_pool $FSNAME.$TESTNAME || return 1
do_facet mgs $LCTL pool_add $FSNAME.$TESTNAME $OST || return 2
$SETSTRIPE $DIR/$tdir -i $OSTIDX -c 1 -p $FSNAME.$TESTNAME
test_222b () {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- rm -rf $DIR/$tdir
- test_mkdir -p $DIR/$tdir
- $SETSTRIPE -c 1 -i 0 $DIR/$tdir
- createmany -o $DIR/$tdir/$tfile 10
- cancel_lru_locks mdc
- cancel_lru_locks osc
- #define OBD_FAIL_LDLM_AGL_DELAY 0x31a
- $LCTL set_param fail_loc=0x31a
- rm -r $DIR/$tdir || "AGL for rmdir failed"
- $LCTL set_param fail_loc=0
+ rm -rf $DIR/$tdir
+ test_mkdir -p $DIR/$tdir
+ $SETSTRIPE -c 1 -i 0 $DIR/$tdir
+ createmany -o $DIR/$tdir/$tfile 10
+ cancel_lru_locks mdc
+ cancel_lru_locks osc
+ #define OBD_FAIL_LDLM_AGL_DELAY 0x31a
+ $LCTL set_param fail_loc=0x31a
+ rm -r $DIR/$tdir || error "AGL for rmdir failed"
+ $LCTL set_param fail_loc=0
}
run_test 222b "AGL for rmdir should not trigger CLIO lock failure ============="
test_224c() { # LU-6441
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+
+ local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
+ save_writethrough $p
+ set_cache writethrough on
+
local pages_per_rpc=$($LCTL get_param \
osc.*.max_pages_per_rpc)
local at_max=$($LCTL get_param -n at_max)
error "conf_param timeout=5 failed"
#define OBD_FAIL_PTLRPC_CLIENT_BULK_CB3 0x520
- $LCTL set_param fail_loc=0x520
+ do_facet ost1 $LCTL set_param fail_loc=0x520
+ $LFS setstripe -c 1 -i 0 $DIR/$tfile
dd if=/dev/zero of=$DIR/$tfile bs=8MB count=1
sync
- $LCTL set_param fail_loc=0
+ do_facet ost1 $LCTL set_param fail_loc=0
set_conf_param_and_check client "$test_at" "$param_at" $at_max ||
error "conf_param at_max=$at_max failed"
$timeout || error "conf_param timeout=$timeout failed"
$LCTL set_param -n $pages_per_rpc
+ restore_lustre_params < $p
+ rm -f $p
}
run_test 224c "Don't hang if one of md lost during large bulk RPC"
# a should be migrated to MDT1, since no other links on MDT0
$LFS migrate -m 1 $DIR/$tdir/migrate_dir ||
- error "migrate dir fails"
+ error "#1 migrate dir fails"
mdt_index=$($LFS getstripe -M $DIR/$tdir/migrate_dir)
[ $mdt_index == 1 ] || error "migrate_dir is not on MDT1"
mdt_index=$($LFS getstripe -M $DIR/$tdir/migrate_dir/a)
# a should stay on MDT1, because it is a mulitple link file
$LFS migrate -m 0 $DIR/$tdir/migrate_dir ||
- error "migrate dir fails"
+ error "#2 migrate dir fails"
mdt_index=$($LFS getstripe -M $DIR/$tdir/migrate_dir/a)
[ $mdt_index == 1 ] || error "a is not on MDT1"
$LFS migrate -m 1 $DIR/$tdir/migrate_dir ||
- error "migrate dir fails"
+ error "#3 migrate dir fails"
a_fid=$($LFS path2fid $DIR/$tdir/migrate_dir/a)
ln_fid=$($LFS path2fid $DIR/$tdir/other_dir/ln1)
# a should be migrated to MDT0, since no other links on MDT1
$LFS migrate -m 0 $DIR/$tdir/migrate_dir ||
- error "migrate dir fails"
+ error "#4 migrate dir fails"
mdt_index=$($LFS getstripe -M $DIR/$tdir/migrate_dir/a)
[ $mdt_index == 0 ] || error "a is not on MDT0"
run_test 239 "osp_sync test"
test_239a() { #LU-5297
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
touch $DIR/$tfile
#define OBD_FAIL_OSP_CHECK_INVALID_REC 0x2100
do_facet $SINGLEMDS $LCTL set_param fail_loc=0x2100
run_test 239a "process invalid osp sync record correctly"
test_239b() { #LU-5297
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
touch $DIR/$tfile1
#define OBD_FAIL_OSP_CHECK_ENOMEM 0x2101
do_facet $SINGLEMDS $LCTL set_param fail_loc=0x2101
test_240() {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
mkdir -p $DIR/$tdir
done
}
-test_241() {
+test_241a() { # was test_241
dd if=/dev/zero of=$DIR/$tfile count=1 bs=40960
ls -la $DIR/$tfile
cancel_lru_locks osc
test_241_dio 1000
wait $PID
}
-run_test 241 "bio vs dio"
+run_test 241a "bio vs dio"
test_241b() {
dd if=/dev/zero of=$DIR/$tfile count=1 bs=40960
run_test 241b "dio vs dio"
test_242() {
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
mkdir -p $DIR/$tdir
touch $DIR/$tdir/$tfile
run_test 245 "check mdc connection flag/data: multiple modify RPCs"
test_246() { # LU-7371
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
[ $(lustre_version_code ost1) -lt $(version_code 2.7.62) ] &&
skip "Need OST version >= 2.7.62" && return 0
do_facet ost1 $LCTL set_param fail_val=4095
}
run_test 247e "mount .. as fileset"
+test_248() {
+ local fast_read_sav=$($LCTL get_param -n llite.*.fast_read 2>/dev/null)
+ [ -z "$fast_read_sav" ] && skip "no fast read support" && return
+
+ # create a large file for fast read verification
+ dd if=/dev/zero of=$DIR/$tfile bs=1M count=128 > /dev/null 2>&1
+
+ # make sure the file is created correctly
+ $CHECKSTAT -s $((128*1024*1024)) $DIR/$tfile ||
+ { rm -f $DIR/$tfile; skip "file creation error" && return; }
+
+ echo "Test 1: verify that fast read is 4 times faster on cache read"
+
+ # small read with fast read enabled
+ $LCTL set_param -n llite.*.fast_read=1
+ local t_fast=$(dd if=$DIR/$tfile of=/dev/null bs=4k 2>&1 |
+ awk '/copied/ { print $6 }')
+
+ # small read with fast read disabled
+ $LCTL set_param -n llite.*.fast_read=0
+ local t_slow=$(dd if=$DIR/$tfile of=/dev/null bs=4k 2>&1 |
+ awk '/copied/ { print $6 }')
+
+ # verify that fast read is 4 times faster for cache read
+ [ $(bc <<< "4 * $t_fast < $t_slow") -eq 1 ] ||
+ error_not_in_vm "fast read was not 4 times faster: " \
+ "$t_fast vs $t_slow"
+
+ echo "Test 2: verify the performance between big and small read"
+ $LCTL set_param -n llite.*.fast_read=1
+
+ # 1k non-cache read
+ cancel_lru_locks osc
+ local t_1k=$(dd if=$DIR/$tfile of=/dev/null bs=1k 2>&1 |
+ awk '/copied/ { print $6 }')
+
+ # 1M non-cache read
+ cancel_lru_locks osc
+ local t_1m=$(dd if=$DIR/$tfile of=/dev/null bs=1k 2>&1 |
+ awk '/copied/ { print $6 }')
+
+ # verify that big IO is not 4 times faster than small IO
+ [ $(bc <<< "4 * $t_1k >= $t_1m") -eq 1 ] ||
+ error_not_in_vm "bigger IO is way too fast: $t_1k vs $t_1m"
+
+ $LCTL set_param -n llite.*.fast_read=$fast_read_sav
+ rm -f $DIR/$tfile
+}
+run_test 248 "fast read verification"
+
+test_249() { # LU-7890
+ rm -f $DIR/$tfile
+ $SETSTRIPE -c 1 $DIR/$tfile
+
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.53) ] &&
+ skip "Need at least version 2.8.54"
+
+ # Offset 2T == 4k * 512M
+ dd if=/dev/zero of=$DIR/$tfile bs=4k count=1 seek=512M ||
+ error "dd to 2T offset failed"
+}
+run_test 249 "Write above 2T file size"
+
test_250() {
[ "$(facet_fstype ost$(($($GETSTRIPE -i $DIR/$tfile) + 1)))" = "zfs" ] \
&& skip "no 16TB file size limit on ZFS" && return
local num
local gen
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
if [ "$(facet_fstype ost1)" != "ldiskfs" -o \
"$(facet_fstype mds1)" != "ldiskfs" ]; then
skip "can only run lr_reader on ldiskfs target"
}
run_test 252 "check lr_reader tool"
+test_253_fill_ost() {
+ local size_mb #how many MB should we write to pass watermark
+ local lwm=$3 #low watermark
+ local free_10mb #10% of free space
+
+ free_kb=$($LFS df $MOUNT | grep $1 | awk '{ print $4 }')
+ size_mb=$((free_kb / 1024 - lwm))
+ free_10mb=$((free_kb / 10240))
+ #If 10% of free space cross low watermark use it
+ if (( free_10mb > size_mb )); then
+ size_mb=$free_10mb
+ else
+ #At least we need to store 1.1 of difference between
+ #free space and low watermark
+ size_mb=$((size_mb + size_mb / 10))
+ fi
+ if (( lwm <= $((free_kb / 1024)) )) || [ ! -f $DIR/$tdir/1 ]; then
+ dd if=/dev/zero of=$DIR/$tdir/1 bs=1M count=$size_mb \
+ oflag=append conv=notrunc
+ fi
+
+ sleep_maxage
+
+ free_kb=$($LFS df $MOUNT | grep $1 | awk '{ print $4 }')
+ echo "OST still has $((free_kb / 1024)) mbytes free"
+}
+
+test_253() {
+ local ostidx=0
+ local rc=0
+
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return
+
+ local ost_name=$($LFS osts |
+ sed -n 's/^'$ostidx': \(.*\)_UUID .*/\1/p')
+ # on the mdt's osc
+ local mdtosc_proc1=$(get_mdtosc_proc_path $SINGLEMDS $ost_name)
+ do_facet $SINGLEMDS $LCTL get_param -n \
+ osp.$mdtosc_proc1.reserved_mb_high ||
+ { skip "remote MDS does not support reserved_mb_high" &&
+ return; }
+
+ rm -rf $DIR/$tdir
+ wait_mds_ost_sync
+ wait_delete_completed
+ mkdir $DIR/$tdir
+
+ local last_wm_h=$(do_facet $SINGLEMDS $LCTL get_param -n \
+ osp.$mdtosc_proc1.reserved_mb_high)
+ local last_wm_l=$(do_facet $SINGLEMDS $LCTL get_param -n \
+ osp.$mdtosc_proc1.reserved_mb_low)
+ echo "prev high watermark $last_wm_h, prev low watermark $last_wm_l"
+
+ create_pool $FSNAME.$TESTNAME || error "Pool creation failed"
+ do_facet mgs $LCTL pool_add $FSNAME.$TESTNAME $ost_name ||
+ error "Adding $ost_name to pool failed"
+
+ # Wait for client to see a OST at pool
+ wait_update $HOSTNAME "$LCTL get_param -n
+ lov.$FSNAME-*.pools.$TESTNAME | sort -u |
+ grep $ost_name" "$ost_name""_UUID" $((TIMEOUT/2)) ||
+ error "Client can not see the pool"
+ $SETSTRIPE $DIR/$tdir -i $ostidx -c 1 -p $FSNAME.$TESTNAME ||
+ error "Setstripe failed"
+
+ dd if=/dev/zero of=$DIR/$tdir/0 bs=1M count=10
+ local blocks=$($LFS df $MOUNT | grep $ost_name | awk '{ print $4 }')
+ echo "OST still has $((blocks/1024)) mbytes free"
+
+ local new_lwm=$((blocks/1024-10))
+ do_facet $SINGLEMDS $LCTL set_param \
+ osp.$mdtosc_proc1.reserved_mb_high=$((new_lwm+5))
+ do_facet $SINGLEMDS $LCTL set_param \
+ osp.$mdtosc_proc1.reserved_mb_low=$new_lwm
+
+ test_253_fill_ost $ost_name $mdtosc_proc1 $new_lwm
+
+ #First enospc could execute orphan deletion so repeat.
+ test_253_fill_ost $ost_name $mdtosc_proc1 $new_lwm
+
+ local oa_status=$(do_facet $SINGLEMDS $LCTL get_param -n \
+ osp.$mdtosc_proc1.prealloc_status)
+ echo "prealloc_status $oa_status"
+
+ dd if=/dev/zero of=$DIR/$tdir/2 bs=1M count=1 &&
+ error "File creation should fail"
+ #object allocation was stopped, but we still able to append files
+ dd if=/dev/zero of=$DIR/$tdir/1 bs=1M seek=6 count=5 oflag=append ||
+ error "Append failed"
+ rm -f $DIR/$tdir/1 $DIR/$tdir/0 $DIR/$tdir/r*
+
+ wait_delete_completed
+
+ sleep_maxage
+
+ for i in $(seq 10 12); do
+ dd if=/dev/zero of=$DIR/$tdir/$i bs=1M count=1 2>/dev/null ||
+ error "File creation failed after rm";
+ done
+
+ oa_status=$(do_facet $SINGLEMDS $LCTL get_param -n \
+ osp.$mdtosc_proc1.prealloc_status)
+ echo "prealloc_status $oa_status"
+
+ if (( oa_status != 0 )); then
+ error "Object allocation still disable after rm"
+ fi
+ do_facet $SINGLEMDS $LCTL set_param \
+ osp.$mdtosc_proc1.reserved_mb_high=$last_wm_h
+ do_facet $SINGLEMDS $LCTL set_param \
+ osp.$mdtosc_proc1.reserved_mb_low=$last_wm_l
+
+
+ do_facet mgs $LCTL pool_remove $FSNAME.$TESTNAME $ost_name ||
+ error "Remove $ost_name from pool failed"
+ do_facet mgs $LCTL pool_destroy $FSNAME.$TESTNAME ||
+ error "Pool destroy fialed"
+}
+run_test 253 "Check object allocation limit"
+
test_254() {
local cl_user
}
run_test 254 "Check changelog size"
+ladvise_no_type()
+{
+ local type=$1
+ local file=$2
+
+ lfs ladvise -a invalid $file 2>&1 | grep "Valid types" |
+ awk -F: '{print $2}' | grep $type > /dev/null
+ if [ $? -ne 0 ]; then
+ return 0
+ fi
+ return 1
+}
+
+ladvise_no_ioctl()
+{
+ local file=$1
+
+ lfs ladvise -a willread $file > /dev/null 2>&1
+ if [ $? -eq 0 ]; then
+ return 1
+ fi
+
+ lfs ladvise -a willread $file 2>&1 |
+ grep "Inappropriate ioctl for device" > /dev/null
+ if [ $? -eq 0 ]; then
+ return 0
+ fi
+ return 1
+}
+
+ladvise_willread_performance()
+{
+ local repeat=10
+ local average_cache=0
+ local average_ladvise=0
+
+ for ((i = 1; i <= $repeat; i++)); do
+ echo "Iter $i/$repeat: reading without willread hint"
+ cancel_lru_locks osc
+ do_nodes $(comma_list $(osts_nodes)) \
+ "echo 3 > /proc/sys/vm/drop_caches"
+ local speed_origin=$($READS -f $DIR/$tfile -s $size \
+ -b 4096 -n $((size / 4096)) -t 60 |
+ sed -e '/^$/d' -e 's#.*s, ##' -e 's#MB/s##')
+
+ echo "Iter $i/$repeat: Reading again without willread hint"
+ cancel_lru_locks osc
+ local speed_cache=$($READS -f $DIR/$tfile -s $size \
+ -b 4096 -n $((size / 4096)) -t 60 |
+ sed -e '/^$/d' -e 's#.*s, ##' -e 's#MB/s##')
+
+ echo "Iter $i/$repeat: reading with willread hint"
+ cancel_lru_locks osc
+ do_nodes $(comma_list $(osts_nodes)) \
+ "echo 3 > /proc/sys/vm/drop_caches"
+ lfs ladvise -a willread $DIR/$tfile ||
+ error "Ladvise failed"
+ local speed_ladvise=$($READS -f $DIR/$tfile -s $size \
+ -b 4096 -n $((size / 4096)) -t 60 |
+ sed -e '/^$/d' -e 's#.*s, ##' -e 's#MB/s##')
+
+ local cache_speedup=$(echo "scale=2; \
+ ($speed_cache-$speed_origin)/$speed_origin*100" | bc)
+ cache_speedup=$(echo ${cache_speedup%.*})
+ echo "Iter $i/$repeat: cache speedup: $cache_speedup%"
+ average_cache=$((average_cache + cache_speedup))
+
+ local ladvise_speedup=$(echo "scale=2; \
+ ($speed_ladvise-$speed_origin)/$speed_origin*100" | bc)
+ ladvise_speedup=$(echo ${ladvise_speedup%.*})
+ echo "Iter $i/$repeat: ladvise speedup: $ladvise_speedup%"
+ average_ladvise=$((average_ladvise + ladvise_speedup))
+ done
+ average_cache=$((average_cache / repeat))
+ average_ladvise=$((average_ladvise / repeat))
+
+ if [ $average_cache -lt 20 ]; then
+ echo "Speedup with cache is less than 20% ($average_cache%),"\
+ "skipping check of speedup with willread:"\
+ "$average_ladvise%"
+ return 0
+ fi
+
+ local lowest_speedup=$((average_cache / 2))
+ [ $average_ladvise -gt $lowest_speedup ] ||
+ error_not_in_vm "Speedup with willread is less than " \
+ "$lowest_speedup%, got $average_ladvise%"
+ echo "Speedup with willread ladvise: $average_ladvise%"
+ echo "Speedup with cache: $average_cache%"
+}
+
+test_255a() {
+ [ $(lustre_version_code ost1) -lt $(version_code 2.8.54) ] &&
+ skip "lustre < 2.8.54 does not support ladvise " && return
+
+ lfs setstripe -c -1 -i 0 $DIR/$tfile || error "$tfile failed"
+
+ ladvise_no_type willread $DIR/$tfile &&
+ skip "willread ladvise is not supported" && return
+
+ ladvise_no_ioctl $DIR/$tfile &&
+ skip "ladvise ioctl is not supported" && return
+
+ local size_mb=100
+ local size=$((size_mb * 1048576))
+ dd if=/dev/zero of=$DIR/$tfile bs=1048576 count=$size_mb ||
+ error "dd to $DIR/$tfile failed"
+
+ lfs ladvise -a willread $DIR/$tfile ||
+ error "Ladvise failed with no range argument"
+
+ lfs ladvise -a willread -s 0 $DIR/$tfile ||
+ error "Ladvise failed with no -l or -e argument"
+
+ lfs ladvise -a willread -e 1 $DIR/$tfile ||
+ error "Ladvise failed with only -e argument"
+
+ lfs ladvise -a willread -l 1 $DIR/$tfile ||
+ error "Ladvise failed with only -l argument"
+
+ lfs ladvise -a willread -s 2 -e 1 $DIR/$tfile &&
+ error "End offset should not be smaller than start offset"
+
+ lfs ladvise -a willread -s 2 -e 2 $DIR/$tfile &&
+ error "End offset should not be equal to start offset"
+
+ lfs ladvise -a willread -s $size -l 1 $DIR/$tfile ||
+ error "Ladvise failed with overflowing -s argument"
+
+ lfs ladvise -a willread -s 1 -e $((size + 1)) $DIR/$tfile ||
+ error "Ladvise failed with overflowing -e argument"
+
+ lfs ladvise -a willread -s 1 -l $size $DIR/$tfile ||
+ error "Ladvise failed with overflowing -l argument"
+
+ lfs ladvise -a willread -l 1 -e 2 $DIR/$tfile &&
+ error "Ladvise succeeded with conflicting -l and -e arguments"
+
+ echo "Synchronous ladvise should wait"
+ local delay=4
+#define OBD_FAIL_OST_LADVISE_PAUSE 0x237
+ do_nodes $(comma_list $(osts_nodes)) \
+ $LCTL set_param fail_val=$delay fail_loc=0x237
+
+ local start_ts=$SECONDS
+ lfs ladvise -a willread $DIR/$tfile ||
+ error "Ladvise failed with no range argument"
+ local end_ts=$SECONDS
+ local inteval_ts=$((end_ts - start_ts))
+
+ if [ $inteval_ts -lt $(($delay - 1)) ]; then
+ error "Synchronous advice didn't wait reply"
+ fi
+
+ echo "Asynchronous ladvise shouldn't wait"
+ local start_ts=$SECONDS
+ lfs ladvise -a willread -b $DIR/$tfile ||
+ error "Ladvise failed with no range argument"
+ local end_ts=$SECONDS
+ local inteval_ts=$((end_ts - start_ts))
+
+ if [ $inteval_ts -gt $(($delay / 2)) ]; then
+ error "Asynchronous advice blocked"
+ fi
+
+ do_nodes $(comma_list $(osts_nodes)) $LCTL set_param fail_loc=0
+ ladvise_willread_performance
+}
+run_test 255a "check 'lfs ladvise -a willread'"
+
+facet_meminfo() {
+ local facet=$1
+ local info=$2
+
+ do_facet $facet "cat /proc/meminfo | grep ^${info}:" | awk '{print $2}'
+}
+
+test_255b() {
+ ladvise_no_type dontneed $DIR/$tfile &&
+ skip "dontneed ladvise is not supported" && return
+
+ ladvise_no_ioctl $DIR/$tfile &&
+ skip "ladvise ioctl is not supported" && return
+
+ [ $(lustre_version_code ost1) -lt $(version_code 2.8.54) ] &&
+ skip "lustre < 2.8.54 does not support ladvise" && return
+
+ [ "$(facet_fstype ost1)" = "zfs" ] &&
+ skip "zfs-osd does not support dontneed advice" && return
+
+ lfs setstripe -c 1 -i 0 $DIR/$tfile
+
+ local size_mb=100
+ local size=$((size_mb * 1048576))
+ # In order to prevent disturbance of other processes, only check 3/4
+ # of the memory usage
+ local kibibytes=$((size_mb * 1024 * 3 / 4))
+
+ dd if=/dev/zero of=$DIR/$tfile bs=1048576 count=$size_mb ||
+ error "dd to $DIR/$tfile failed"
+
+ local total=$(facet_meminfo ost1 MemTotal)
+ echo "Total memory: $total KiB"
+
+ do_facet ost1 "sync && echo 3 > /proc/sys/vm/drop_caches"
+ local before_read=$(facet_meminfo ost1 Cached)
+ echo "Cache used before read: $before_read KiB"
+
+ lfs ladvise -a willread $DIR/$tfile ||
+ error "Ladvise willread failed"
+ local after_read=$(facet_meminfo ost1 Cached)
+ echo "Cache used after read: $after_read KiB"
+
+ lfs ladvise -a dontneed $DIR/$tfile ||
+ error "Ladvise dontneed again failed"
+ local no_read=$(facet_meminfo ost1 Cached)
+ echo "Cache used after dontneed ladvise: $no_read KiB"
+
+ if [ $total -lt $((before_read + kibibytes)) ]; then
+ echo "Memory is too small, abort checking"
+ return 0
+ fi
+
+ if [ $((before_read + kibibytes)) -gt $after_read ]; then
+ error "Ladvise willread should use more memory" \
+ "than $kibibytes KiB"
+ fi
+
+ if [ $((no_read + kibibytes)) -gt $after_read ]; then
+ error "Ladvise dontneed should release more memory" \
+ "than $kibibytes KiB"
+ fi
+}
+run_test 255b "check 'lfs ladvise -a dontneed'"
+
test_256() {
local cl_user
local cat_sl
}
run_test 256 "Check llog delete for empty and not full state"
+test_257() {
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.55) ]] &&
+ skip "Need MDS version at least 2.8.55" && return
+
+ test_mkdir -p $DIR/$tdir
+
+ setfattr -n trusted.name1 -v value1 $DIR/$tdir ||
+ error "setfattr -n trusted.name1=value1 $DIR/$tdir failed"
+ stat $DIR/$tdir
+
+#define OBD_FAIL_MDS_XATTR_REP 0x161
+ local mdtidx=$($LFS getstripe -M $DIR/$tdir)
+ local facet=mds$((mdtidx + 1))
+ set_nodes_failloc $(facet_active_host $facet) 0x80000161
+ getfattr -n trusted.name1 $DIR/$tdir 2> /dev/null
+
+ stop $facet || error "stop MDS failed"
+ start $facet $(mdsdevname $((mdtidx + 1))) $MDS_MOUNT_OPTS ||
+ error "start MDS fail"
+}
+run_test 257 "xattr locks are not lost"
+
+test_260() {
+#define OBD_FAIL_MDC_CLOSE 0x806
+ $LCTL set_param fail_loc=0x80000806
+ touch $DIR/$tfile
+
+}
+run_test 260 "Check mdc_close fail"
+
cleanup_test_300() {
trap 0
umask $SAVE_UMASK
mkdir $DIR/$tdir
mkdir $DIR/$tdir/normal_dir
+ #Checking when client cache stripe index
+ $LFS setdirstripe -c$MDSCOUNT $DIR/$tdir/striped_dir
+ $LFS setdirstripe -D -i1 $DIR/$tdir/striped_dir ||
+ error "create striped_dir failed"
+
+ mkdir $DIR/$tdir/striped_dir/dir1 ||
+ error "create dir1 fails"
+ stripe_index=$($LFS getdirstripe -i $DIR/$tdir/striped_dir/dir1)
+ [ $stripe_index -eq 1 ] ||
+ error "dir1 expect 1 got $stripe_index"
+
+ $LFS setdirstripe -i2 $DIR/$tdir/striped_dir/dir2 ||
+ error "create dir2 fails"
+ stripe_index=$($LFS getdirstripe -i $DIR/$tdir/striped_dir/dir2)
+ [ $stripe_index -eq 2 ] ||
+ error "dir2 expect 2 got $stripe_index"
+
+ #check default stripe count/stripe index
test_300_check_default_striped_dir normal_dir $MDSCOUNT 1
test_300_check_default_striped_dir normal_dir 1 0
test_300_check_default_striped_dir normal_dir 2 1
test_300p() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
mkdir -p $DIR/$tdir
}
run_test 310c "open-unlink remote file with multiple links"
+#LU-4825
+test_311() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.54) ] &&
+ skip "lustre < 2.8.54 does not contain LU-4825 fix" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+
+ local old_iused=$($LFS df -i | grep OST0000 | awk '{ print $3 }')
+
+ mkdir -p $DIR/$tdir
+ $SETSTRIPE -i 0 -c 1 $DIR/$tdir
+ createmany -o $DIR/$tdir/$tfile. 1000
+
+ # statfs data is not real time, let's just calculate it
+ old_iused=$((old_iused + 1000))
+
+ local count=$(do_facet $SINGLEMDS "lctl get_param -n \
+ osp.*OST0000*MDT0000.create_count")
+ local max_count=$(do_facet $SINGLEMDS "lctl get_param -n \
+ osp.*OST0000*MDT0000.max_create_count")
+ for idx in $(seq $MDSCOUNT); do
+ do_facet mds$idx "lctl set_param -n \
+ osp.*OST0000*MDT000?.max_create_count=0"
+ done
+
+ $SETSTRIPE -i 0 $DIR/$tdir/$tfile || error "setstripe failed"
+ local index=$($GETSTRIPE -i $DIR/$tdir/$tfile)
+ [ $index -ne 0 ] || error "$tfile stripe index is 0"
+
+ unlinkmany $DIR/$tdir/$tfile. 1000
+
+ for idx in $(seq $MDSCOUNT); do
+ do_facet mds$idx "lctl set_param -n \
+ osp.*OST0000*MDT000?.max_create_count=$max_count"
+ do_facet mds$idx "lctl set_param -n \
+ osp.*OST0000*MDT000?.create_count=$count"
+ done
+
+ local new_iused
+ for i in $(seq 120); do
+ new_iused=$($LFS df -i | grep OST0000 | awk '{ print $3 }')
+ # system may be too busy to destroy all objs in time, use
+ # a somewhat small value to not fail autotest
+ [ $((old_iused - new_iused)) -gt 400 ] && break
+ sleep 1
+ done
+
+ echo "waited $i sec, old Iused $old_iused, new Iused $new_iused"
+ [ $((old_iused - new_iused)) -gt 400 ] ||
+ error "objs not destroyed after unlink"
+}
+run_test 311 "disable OSP precreate, and unlink should destroy objs"
+
+zfs_oid_to_objid()
+{
+ local ost=$1
+ local objid=$2
+
+ local vdevdir=$(dirname $(facet_vdevice $ost))
+ local cmd="$ZDB -e -p $vdevdir -dddd $(facet_device $ost)"
+ local zfs_zapid=$(do_facet $ost $cmd |
+ grep -w "/O/0/d$((objid%32))" -C 5 |
+ awk '/Object/{getline; print $1}')
+ local zfs_objid=$(do_facet $ost $cmd $zfs_zapid |
+ awk "/$objid = /"'{printf $3}')
+
+ echo $zfs_objid
+}
+
+zfs_object_blksz() {
+ local ost=$1
+ local objid=$2
+
+ local vdevdir=$(dirname $(facet_vdevice $ost))
+ local cmd="$ZDB -e -p $vdevdir -dddd $(facet_device $ost)"
+ local blksz=$(do_facet $ost $cmd $objid |
+ awk '/dblk/{getline; printf $4}')
+
+ case "${blksz: -1}" in
+ k|K) blksz=$((${blksz:0:$((${#blksz} - 1))}*1024)) ;;
+ m|M) blksz=$((${blksz:0:$((${#blksz} - 1))}*1024*1024)) ;;
+ *) ;;
+ esac
+
+ echo $blksz
+}
+
+test_312() { # LU-4856
+ [ $(facet_fstype ost1) = "zfs" ] ||
+ { skip "the test only applies to zfs" && return; }
+
+ local max_blksz=$(do_facet ost1 \
+ $ZFS get -p recordsize $(facet_device ost1) |
+ awk '!/VALUE/{print $3}')
+
+ # to make life a little bit easier
+ $LFS mkdir -c 1 -i 0 $DIR/$tdir
+ $LFS setstripe -c 1 -i 0 $DIR/$tdir
+
+ local tf=$DIR/$tdir/$tfile
+ touch $tf
+ local oid=$($LFS getstripe $tf | awk '/obdidx/{getline; print $2}')
+
+ # Get ZFS object id
+ local zfs_objid=$(zfs_oid_to_objid ost1 $oid)
+
+ # block size change by sequential over write
+ local blksz
+ for ((bs=4096; bs <= max_blksz; bs <<= 2)); do
+ dd if=/dev/zero of=$tf bs=$bs count=1 oflag=sync conv=notrunc
+
+ blksz=$(zfs_object_blksz ost1 $zfs_objid)
+ [ $blksz -eq $bs ] || error "blksz error: $blksz, expected: $bs"
+ done
+ rm -f $tf
+
+ # block size change by sequential append write
+ dd if=/dev/zero of=$tf bs=4K count=1 oflag=sync conv=notrunc
+ oid=$($LFS getstripe $tf | awk '/obdidx/{getline; print $2}')
+ zfs_objid=$(zfs_oid_to_objid ost1 $oid)
+
+ for ((count = 1; count < $((max_blksz / 4096)); count *= 2)); do
+ dd if=/dev/zero of=$tf bs=4K count=$count seek=$count \
+ oflag=sync conv=notrunc
+
+ blksz=$(zfs_object_blksz ost1 $zfs_objid)
+ blksz=$((blksz / 8192)) # in 2*4K unit
+ [ $blksz -eq $count ] ||
+ error "blksz error(in 8k): $blksz, expected: $count"
+ done
+ rm -f $tf
+
+ # random write
+ touch $tf
+ oid=$($LFS getstripe $tf | awk '/obdidx/{getline; print $2}')
+ zfs_objid=$(zfs_oid_to_objid ost1 $oid)
+
+ dd if=/dev/zero of=$tf bs=8K count=1 oflag=sync conv=notrunc
+ blksz=$(zfs_object_blksz ost1 $zfs_objid)
+ [ $blksz -eq 8192 ] || error "blksz error: $blksz, expected: 8k"
+
+ dd if=/dev/zero of=$tf bs=64K count=1 oflag=sync conv=notrunc seek=128
+ blksz=$(zfs_object_blksz ost1 $zfs_objid)
+ [ $blksz -eq 65536 ] || error "blksz error: $blksz, expected: 64k"
+
+ dd if=/dev/zero of=$tf bs=1M count=1 oflag=sync conv=notrunc
+ blksz=$(zfs_object_blksz ost1 $zfs_objid)
+ [ $blksz -eq 65536 ] || error "rewrite error: $blksz, expected: 64k"
+}
+run_test 312 "make sure ZFS adjusts its block size by write pattern"
+
+test_313() {
+ local file=$DIR/$tfile
+ rm -f $file
+ $SETSTRIPE -c 1 -i 0 $file || error "setstripe failed"
+
+ # define OBD_FAIL_TGT_RCVD_EIO 0x720
+ do_facet ost1 "$LCTL set_param fail_loc=0x720"
+ dd if=/dev/zero of=$file bs=4096 oflag=direct count=1 &&
+ error "write should failed"
+ do_facet ost1 "$LCTL set_param fail_loc=0"
+ rm -f $file
+}
+run_test 313 "io should fail after last_rcvd update fail"
+
+test_fake_rw() {
+ local read_write=$1
+ if [ "$read_write" = "write" ]; then
+ local dd_cmd="dd if=/dev/zero of=$DIR/$tfile"
+ elif [ "$read_write" = "read" ]; then
+ local dd_cmd="dd of=/dev/null if=$DIR/$tfile"
+ else
+ error "argument error"
+ fi
+
+ # turn off debug for performance testing
+ local saved_debug=$($LCTL get_param -n debug)
+ $LCTL set_param debug=0
+
+ $SETSTRIPE -c 1 -i 0 $DIR/$tfile
+
+ # get ost1 size - lustre-OST0000
+ local ost1_avail_size=$($LFS df | awk /${ost1_svc}/'{ print $4 }')
+ local blocks=$((ost1_avail_size/2/1024)) # half avail space by megabytes
+ [ $blocks -gt 1000 ] && blocks=1000 # 1G in maximum
+
+ if [ "$read_write" = "read" ]; then
+ truncate -s $(expr 1048576 \* $blocks) $DIR/$tfile
+ fi
+
+ local start_time=$(date +%s.%N)
+ $dd_cmd bs=1M count=$blocks oflag=sync ||
+ error "real dd $read_write error"
+ local duration=$(bc <<< "$(date +%s.%N) - $start_time")
+
+ if [ "$read_write" = "write" ]; then
+ rm -f $DIR/$tfile
+ fi
+
+ # define OBD_FAIL_OST_FAKE_RW 0x238
+ do_facet ost1 $LCTL set_param fail_loc=0x238
+
+ local start_time=$(date +%s.%N)
+ $dd_cmd bs=1M count=$blocks oflag=sync ||
+ error "fake dd $read_write error"
+ local duration_fake=$(bc <<< "$(date +%s.%N) - $start_time")
+
+ if [ "$read_write" = "write" ]; then
+ # verify file size
+ cancel_lru_locks osc
+ $CHECKSTAT -t file -s $((blocks * 1024 * 1024)) $DIR/$tfile ||
+ error "$tfile size not $blocks MB"
+ fi
+ do_facet ost1 $LCTL set_param fail_loc=0
+
+ echo "fake $read_write $duration_fake vs. normal $read_write" \
+ "$duration in seconds"
+ [ $(bc <<< "$duration_fake < $duration") -eq 1 ] ||
+ error_not_in_vm "fake write is slower"
+
+ $LCTL set_param -n debug="$saved_debug"
+ rm -f $DIR/$tfile
+}
+test_399a() { # LU-7655 for OST fake write
+ test_fake_rw write
+}
+run_test 399a "fake write should not be slower than normal write"
+
+
+test_399b() { # LU-8726 for OST fake read
+ if [ "$(facet_fstype ost1)" != "ldiskfs" ]; then
+ skip "only for ldiskfs" && return 0
+ fi
+ test_fake_rw read
+}
+run_test 399b "fake read should not be slower than normal read"
+
test_400a() { # LU-1606, was conf-sanity test_74
local extra_flags=''
local out=$TMP/$tfile
run_test 400b "packaged headers can be compiled"
test_401a() { #LU-7437
+ local printf_arg=$(find -printf 2>&1 | grep "unrecognized:")
+ [ -n "$printf_arg" ] && skip_env "find does not support -printf" &&
+ return
#count the number of parameters by "list_param -R"
local params=$($LCTL list_param -R '*' 2>/dev/null | wc -l)
#count the number of parameters by listing proc files
run_test 401d "Verify 'lctl set_param' accepts values containing '='"
test_402() {
+ local server_version=$(lustre_version_code $SINGLEMDS)
+ [[ $server_version -ge $(version_code 2.7.66) ]] ||
+ [[ $server_version -ge $(version_code 2.7.18.4) &&
+ $server_version -lt $(version_code 2.7.50) ]] ||
+ [[ $server_version -ge $(version_code 2.7.2) &&
+ $server_version -lt $(version_code 2.7.11) ]] ||
+ { skip "Need MDS version 2.7.2+ or 2.7.18.4+ or 2.7.66+";
+ return; }
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
$LFS setdirstripe -i 0 $DIR/$tdir || error "setdirstripe -i 0 failed"
#define OBD_FAIL_MDS_FLD_LOOKUP 0x15c
do_facet mds1 "lctl set_param fail_loc=0x8000015c"
run_test 403 "i_nlink should not drop to zero due to aliasing"
test_404() { # LU-6601
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
local mosps=$(do_facet $SINGLEMDS $LCTL dl |
awk '/osp .*-osc-MDT/ { print $4}')
}
run_test 404 "validate manual {de}activated works properly for OSPs"
+test_405() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.6.92) ] &&
+ skip "Layout swap lock is not supported" && return
+
+ check_swap_layouts_support && return 0
+
+ test_mkdir -p $DIR/$tdir
+ swap_lock_test -d $DIR/$tdir ||
+ error "One layout swap locked test failed"
+}
+run_test 405 "Various layout swap lock tests"
+
+test_406() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $OSTCOUNT -lt 2 ] && skip "needs >= 2 OSTs" && return
+ [ -n "$FILESET" ] && skip "SKIP due to FILESET set" && return
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.50) ] &&
+ skip "Need MDS version at least 2.8.50" && return
+
+ local def_stripenr=$($GETSTRIPE -c $MOUNT)
+ local def_stripe_size=$($GETSTRIPE -S $MOUNT)
+ local def_stripe_offset=$($GETSTRIPE -i $MOUNT)
+ local def_pool=$($GETSTRIPE -p $MOUNT)
+
+ local test_pool=$TESTNAME
+ pool_add $test_pool || error "pool_add failed"
+ pool_add_targets $test_pool 0 $(($OSTCOUNT - 1)) 1 ||
+ error "pool_add_targets failed"
+
+ # parent set default stripe count only, child will stripe from both
+ # parent and fs default
+ $SETSTRIPE -c 1 -i 1 -S $((def_stripe_size * 2)) -p $test_pool $MOUNT ||
+ error "setstripe $MOUNT failed"
+ $LFS mkdir -c $MDSCOUNT $DIR/$tdir || error "mkdir $tdir failed"
+ $SETSTRIPE -c $OSTCOUNT $DIR/$tdir || error "setstripe $tdir failed"
+ for i in $(seq 10); do
+ local f=$DIR/$tdir/$tfile.$i
+ touch $f || error "touch failed"
+ local count=$($GETSTRIPE -c $f)
+ [ $count -eq $OSTCOUNT ] ||
+ error "$f stripe count $count != $OSTCOUNT"
+ local offset=$($GETSTRIPE -i $f)
+ [ $offset -eq 1 ] || error "$f stripe offset $offset != 1"
+ local size=$($GETSTRIPE -S $f)
+ [ $size -eq $((def_stripe_size * 2)) ] ||
+ error "$f stripe size $size != $((def_stripe_size * 2))"
+ local pool=$($GETSTRIPE -p $f)
+ [ $pool == $test_pool ] || error "$f pool $pool != $test_pool"
+ done
+
+ # change fs default striping, delete parent default striping, now child
+ # will stripe from new fs default striping only
+ $SETSTRIPE -c 1 -S $def_stripe_size -i 0 $MOUNT ||
+ error "change $MOUNT default stripe failed"
+ $SETSTRIPE -c 0 $DIR/$tdir || error "delete $tdir default stripe failed"
+ for i in $(seq 11 20); do
+ local f=$DIR/$tdir/$tfile.$i
+ touch $f || error "touch $f failed"
+ local count=$($GETSTRIPE -c $f)
+ [ $count -eq 1 ] || error "$f stripe count $count != 1"
+ local offset=$($GETSTRIPE -i $f)
+ [ $offset -eq 0 ] || error "$f stripe offset $offset != 0"
+ local size=$($GETSTRIPE -S $f)
+ [ $size -eq $def_stripe_size ] ||
+ error "$f stripe size $size != $def_stripe_size"
+ local pool=$($GETSTRIPE -p $f)
+ [ "#$pool" == "#" ] || error "$f pool $pool is set"
+
+ done
+
+ unlinkmany $DIR/$tdir/$tfile. 1 20
+
+ # restore FS default striping
+ if [ -z $def_pool ]; then
+ $SETSTRIPE -c $def_stripenr -S $def_stripe_size \
+ -i $def_stripe_offset $MOUNT ||
+ error "restore default striping failed"
+ else
+ $SETSTRIPE -c $def_stripenr -S $def_stripe_size -p $def_pool \
+ -i $def_stripe_offset $MOUNT ||
+ error "restore default striping with $def_pool failed"
+ fi
+
+ local f=$DIR/$tdir/$tfile
+ pool_remove_all_targets $test_pool $f
+ pool_remove $test_pool $f
+}
+run_test 406 "DNE support fs default striping"
+
+test_407() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+
+ [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.55) ]] &&
+ skip "Need MDS version at least 2.8.55" && return
+
+ $LFS mkdir -i 0 -c 1 $DIR/$tdir.0 ||
+ error "$LFS mkdir -i 0 -c 1 $tdir.0 failed"
+ $LFS mkdir -i 1 -c 1 $DIR/$tdir.1 ||
+ error "$LFS mkdir -i 1 -c 1 $tdir.1 failed"
+ touch $DIR/$tdir.0/$tfile.0 || error "touch $tdir.0/$tfile.0 failed"
+
+ #define OBD_FAIL_DT_TXN_STOP 0x2019
+ for idx in $(seq $MDSCOUNT); do
+ do_facet mds$idx "lctl set_param fail_loc=0x2019"
+ done
+ $LFS mkdir -c 2 $DIR/$tdir && error "$LFS mkdir -c 2 $tdir should fail"
+ mv $DIR/$tdir.0/$tfile.0 $DIR/$tdir.1/$tfile.1 &&
+ error "mv $tdir.0/$tfile.0 $tdir.1/$tfile.1 should fail"
+ true
+}
+run_test 407 "transaction fail should cause operation fail"
+
+test_408() {
+ dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1 oflag=direct
+
+ #define OBD_FAIL_OSC_BRW_PREP_REQ2 0x40a
+ lctl set_param fail_loc=0x8000040a
+ # let ll_prepare_partial_page() fail
+ dd if=/dev/zero of=$DIR/$tfile bs=2048 count=1 conv=notrunc || true
+
+ rm -f $DIR/$tfile
+
+ # create at least 100 unused inodes so that
+ # shrink_icache_memory(0) should not return 0
+ touch $DIR/$tfile-{0..100}
+ rm -f $DIR/$tfile-{0..100}
+ sync
+
+ echo 2 > /proc/sys/vm/drop_caches
+}
+run_test 408 "drop_caches should not hang due to page leaks"
+
+test_409()
+{
+ [ $MDSCOUNT -lt 2 ] &&
+ skip "We need at least 2 MDTs for this test" && return
+
+ check_mount_and_prep
+
+ mkdir -p $DIR/$tdir || error "(0) Fail to mkdir"
+ $LFS mkdir -i 1 -c 2 $DIR/$tdir/foo || error "(1) Fail to mkdir"
+ touch $DIR/$tdir/guard || error "(2) Fail to create"
+
+ local PREFIX=$(str_repeat 'A' 128)
+ echo "Create 1K hard links start at $(date)"
+ createmany -l $DIR/$tdir/guard $DIR/$tdir/foo/${PREFIX}_ 1000 ||
+ error "(3) Fail to hard link"
+
+ echo "Links count should be right although linkEA overflow"
+ stat $DIR/$tdir/guard || error "(4) Fail to stat"
+ local linkcount=$(stat --format=%h $DIR/$tdir/guard)
+ [ $linkcount -eq 1001 ] ||
+ error "(5) Unexpected hard links count: $linkcount"
+
+ echo "List all links start at $(date)"
+ ls -l $DIR/$tdir/foo > /dev/null ||
+ error "(6) Fail to list $DIR/$tdir/foo"
+
+ echo "Unlink hard links start at $(date)"
+ unlinkmany $DIR/$tdir/foo/${PREFIX}_ 1000 ||
+ error "(7) Fail to unlink"
+}
+run_test 409 "Large amount of cross-MDTs hard links on the same file"
+
#
# tests that do cleanup/setup should be run at the end
#