+test_183() { # LU-2275
+ [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ mkdir -p $DIR/$tdir || error "creating dir $DIR/$tdir"
+ echo aaa > $DIR/$tdir/$tfile
+
+#define OBD_FAIL_MDS_NEGATIVE_POSITIVE 0x148
+ do_facet $SINGLEMDS $LCTL set_param fail_loc=0x148
+
+ ls -l $DIR/$tdir && error "ls succeeded, should have failed"
+ cat $DIR/$tdir/$tfile && error "cat succeeded, should have failed"
+
+ do_facet $SINGLEMDS $LCTL set_param fail_loc=0
+
+ # Flush negative dentry cache
+ touch $DIR/$tdir/$tfile
+
+ # We are not checking for any leaked references here, they'll
+ # become evident next time we do cleanup with module unload.
+ rm -rf $DIR/$tdir
+}
+run_test 183 "No crash or request leak in case of strange dispositions ========"
+
+# test suite 184 is for LU-2016, LU-2017
+test_184a() {
+ check_swap_layouts_support && return 0
+
+ dir0=$DIR/$tdir/$testnum
+ test_mkdir -p $dir0 || error "creating dir $dir0"
+ ref1=/etc/passwd
+ ref2=/etc/group
+ file1=$dir0/f1
+ file2=$dir0/f2
+ $SETSTRIPE -c1 $file1
+ cp $ref1 $file1
+ $SETSTRIPE -c2 $file2
+ cp $ref2 $file2
+ gen1=$($GETSTRIPE -g $file1)
+ gen2=$($GETSTRIPE -g $file2)
+
+ $LFS swap_layouts $file1 $file2 || error "swap of file layout failed"
+ gen=$($GETSTRIPE -g $file1)
+ [[ $gen1 != $gen ]] ||
+ "Layout generation on $file1 does not change"
+ gen=$($GETSTRIPE -g $file2)
+ [[ $gen2 != $gen ]] ||
+ "Layout generation on $file2 does not change"
+
+ cmp $ref1 $file2 || error "content compare failed ($ref1 != $file2)"
+ cmp $ref2 $file1 || error "content compare failed ($ref2 != $file1)"
+}
+run_test 184a "Basic layout swap"
+
+test_184b() {
+ check_swap_layouts_support && return 0
+
+ dir0=$DIR/$tdir/$testnum
+ mkdir -p $dir0 || error "creating dir $dir0"
+ file1=$dir0/f1
+ file2=$dir0/f2
+ file3=$dir0/f3
+ dir1=$dir0/d1
+ dir2=$dir0/d2
+ mkdir $dir1 $dir2
+ $SETSTRIPE -c1 $file1
+ $SETSTRIPE -c2 $file2
+ $SETSTRIPE -c1 $file3
+ chown $RUNAS_ID $file3
+ gen1=$($GETSTRIPE -g $file1)
+ gen2=$($GETSTRIPE -g $file2)
+
+ $LFS swap_layouts $dir1 $dir2 &&
+ error "swap of directories layouts should fail"
+ $LFS swap_layouts $dir1 $file1 &&
+ error "swap of directory and file layouts should fail"
+ $RUNAS $LFS swap_layouts $file1 $file2 &&
+ error "swap of file we cannot write should fail"
+ $LFS swap_layouts $file1 $file3 &&
+ error "swap of file with different owner should fail"
+ /bin/true # to clear error code
+}
+run_test 184b "Forbidden layout swap (will generate errors)"
+
+test_184c() {
+ check_swap_layouts_support && return 0
+
+ local dir0=$DIR/$tdir/$testnum
+ mkdir -p $dir0 || error "creating dir $dir0"
+
+ local ref1=$dir0/ref1
+ local ref2=$dir0/ref2
+ local file1=$dir0/file1
+ local file2=$dir0/file2
+ # create a file large enough for the concurent test
+ dd if=/dev/urandom of=$ref1 bs=1M count=$((RANDOM % 50 + 20))
+ dd if=/dev/urandom of=$ref2 bs=1M count=$((RANDOM % 50 + 20))
+ echo "ref file size: ref1(`stat -c %s $ref1`), ref2(`stat -c %s $ref2`)"
+
+ cp $ref2 $file2
+ dd if=$ref1 of=$file1 bs=16k &
+ local DD_PID=$!
+
+ # Make sure dd starts to copy file
+ while [ ! -f $file1 ]; do sleep 0.1; done
+
+ $LFS swap_layouts $file1 $file2
+ local rc=$?
+ wait $DD_PID
+ [[ $? == 0 ]] || error "concurrent write on $file1 failed"
+ [[ $rc == 0 ]] || error "swap of $file1 and $file2 failed"
+
+ # how many bytes copied before swapping layout
+ local copied=`stat -c %s $file2`
+ local remaining=`stat -c %s $ref1`
+ remaining=$((remaining - copied))
+ echo "Copied $copied bytes before swapping layout..."
+
+ cmp -n $copied $file1 $ref2 | grep differ &&
+ error "Content mismatch [0, $copied) of ref2 and file1"
+ cmp -n $copied $file2 $ref1 ||
+ error "Content mismatch [0, $copied) of ref1 and file2"
+ cmp -i $copied:$copied -n $remaining $file1 $ref1 ||
+ error "Content mismatch [$copied, EOF) of ref1 and file1"
+
+ # clean up
+ rm -f $ref1 $ref2 $file1 $file2
+}
+run_test 184c "Concurrent write and layout swap"
+
+test_184d() {
+ check_swap_layouts_support && return 0
+
+ local file1=$DIR/$tdir/$tfile-1
+ local file2=$DIR/$tdir/$tfile-2
+ local file3=$DIR/$tdir/$tfile-3
+ local lovea1
+ local lovea2
+
+ mkdir -p $DIR/$tdir
+ touch $file1 || error "create $file1 failed"
+ $OPENFILE -f O_CREAT:O_LOV_DELAY_CREATE $file2 ||
+ error "create $file2 failed"
+ $OPENFILE -f O_CREAT:O_LOV_DELAY_CREATE $file3 ||
+ error "create $file3 failed"
+ lovea1=$($LFS getstripe $file1 | sed 1d)
+
+ $LFS swap_layouts $file2 $file3 ||
+ error "swap $file2 $file3 layouts failed"
+ $LFS swap_layouts $file1 $file2 ||
+ error "swap $file1 $file2 layouts failed"
+
+ lovea2=$($LFS getstripe $file2 | sed 1d)
+ [ "$lovea1" == "$lovea2" ] || error "lovea $lovea1 != $lovea2"
+
+ lovea1=$(getfattr -n trusted.lov $file1 | grep ^trusted)
+ [ -z $lovea1 ] || error "$file1 shouldn't have lovea"
+}
+run_test 184d "allow stripeless layouts swap"
+
+
+test_185() { # LU-2441
+ mkdir -p $DIR/$tdir || error "creating dir $DIR/$tdir"
+ touch $DIR/$tdir/spoo
+ local mtime1=$(stat -c "%Y" $DIR/$tdir)
+ local fid=$($MULTIOP $DIR/$tdir VFw4096c) ||
+ error "cannot create/write a volatile file"
+ $CHECKSTAT -t file $MOUNT/.lustre/fid/$fid 2>/dev/null &&
+ error "FID is still valid after close"
+
+ multiop_bg_pause $DIR/$tdir vVw4096_c
+ local multi_pid=$!
+
+ local OLD_IFS=$IFS
+ IFS=":"
+ local fidv=($fid)
+ IFS=$OLD_IFS
+ # assume that the next FID for this client is sequential, since stdout
+ # is unfortunately eaten by multiop_bg_pause
+ local n=$((${fidv[1]} + 1))
+ local next_fid="${fidv[0]}:$(printf "0x%x" $n):${fidv[2]}"
+ $CHECKSTAT -t file $MOUNT/.lustre/fid/$next_fid ||
+ error "FID is missing before close"
+ kill -USR1 $multi_pid
+ # 1 second delay, so if mtime change we will see it
+ sleep 1
+ local mtime2=$(stat -c "%Y" $DIR/$tdir)
+ [[ $mtime1 == $mtime2 ]] || error "mtime has changed"
+}
+run_test 185 "Volatile file support"
+
+test_187a() {
+ local dir0=$DIR/$tdir/$testnum
+ mkdir -p $dir0 || error "creating dir $dir0"
+
+ local file=$dir0/file1
+ dd if=/dev/urandom of=$file count=10 bs=1M conv=fsync
+ local dv1=$($LFS data_version $file)
+ dd if=/dev/urandom of=$file seek=10 count=1 bs=1M conv=fsync
+ local dv2=$($LFS data_version $file)
+ [[ $dv1 != $dv2 ]] ||
+ error "data version did not change on write $dv1 == $dv2"
+
+ # clean up
+ rm -f $file1
+}
+run_test 187a "Test data version change"
+
+test_187b() {
+ local dir0=$DIR/$tdir/$testnum
+ mkdir -p $dir0 || error "creating dir $dir0"
+
+ declare -a DV=$($MULTIOP $dir0 Vw1000xYw1000xY | cut -f3 -d" ")
+ [[ ${DV[0]} != ${DV[1]} ]] ||
+ error "data version did not change on write"\
+ " ${DV[0]} == ${DV[1]}"
+
+ # clean up
+ rm -f $file1
+}
+run_test 187b "Test data version change on volatile file"
+