if [[ $(uname -m) = aarch64 ]]; then
# bug number: LU-11596 (all below)
ALWAYS_EXCEPT+=" 42d 42e 63a 63b 64a 64b 64c"
- # bug number: LU-11671 LU-11665 LU-11594 LU-11667 LU-11729
- ALWAYS_EXCEPT+=" 45 101c 103a 317 810"
+ # bug number: LU-11671 LU-11594 LU-11667 LU-11729
+ ALWAYS_EXCEPT+=" 45 103a 317 810"
fi
# Check Grants after these tests
get_lustre_env
init_logging
-if [[ $MDSCOUNT -gt 1 ]]; then
- # bug number: LU-11161
- ALWAYS_EXCEPT+=" 160g"
-fi
-
# 5 12 (min)"
[ "$SLOW" = "no" ] && EXCEPT_SLOW="27m 64b 68 71 115 300o"
}
run_test 60a "llog_test run from kernel module and test llog_reader"
-test_60aa() {
- remote_mgs_nodsh && skip "remote MGS with nodsh"
-
- # test old logid format
- if [ $MGS_VERSION -le $(version_code 3.1.53) ]; then
- do_facet mgs $LCTL dl | grep MGS
- do_facet mgs "$LCTL --device %MGS llog_print \\\\\\\$$FSNAME-client" ||
- error "old llog_print failed"
- fi
-
- # test new logid format
- if [ $MGS_VERSION -ge $(version_code 2.9.53) ]; then
- do_facet mgs "$LCTL --device MGS llog_print $FSNAME-client" ||
- error "new llog_print failed"
- fi
-}
-run_test 60aa "llog_print works with FIDs and simple names"
-
-test_60ab() {
- # test llog_print with params
-
- [[ $MDS1_VERSION -gt $(version_code 2.11.51) ]] ||
- skip "Need server version greater than 2.11.51"
-
- local yaml
- local orig_val
-
- orig_val=$(do_facet mgs $LCTL get_param jobid_name)
- do_facet mgs $LCTL set_param -P jobid_name="testname"
-
- yaml=$(do_facet mgs $LCTL --device MGS llog_print params |
- grep jobid_name | tail -n 1)
-
- local param=`awk '{ print $10 }' <<< "$yaml"`
- local val=`awk '{ print $12 }' <<< "$yaml"`
- #return to the default
- do_facet mgs $LCTL set_param -P jobid_name=$orig_val
- [ $val = "testname" ] || error "bad value: $val"
- [ $param = "jobid_name," ] || error "Bad param: $param"
-}
-run_test 60ab "llog_print params output values from set_param -P"
-
test_60b() { # bug 6411
[ $PARALLEL == "yes" ] && skip "skip parallel run"
}
run_test 65j "set default striping on root directory (bug 6367)="
-cleaup_65k() {
+cleanup_65k() {
rm -rf $DIR/$tdir
wait_delete_completed
do_facet $SINGLEMDS "lctl set_param -n \
}
run_test 65m "normal user can't set filesystem default stripe"
+test_65n() {
+ [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.12.50) ]] ||
+ skip "Need MDS version at least 2.12.50"
+ [[ $PARALLEL != "yes" ]] || skip "skip parallel run"
+
+ [[ $OSTCOUNT -ge 2 ]] || skip_env "needs >= 2 OSTs"
+ which getfattr > /dev/null 2>&1 || skip_env "no getfattr command"
+ which setfattr > /dev/null 2>&1 || skip_env "no setfattr command"
+
+ local root_layout=$(save_layout $MOUNT)
+ stack_trap "restore_layout $MOUNT $root_layout" EXIT
+
+ # new subdirectory under root directory should not inherit
+ # the default layout from root
+ local dir1=$MOUNT/$tdir-1
+ mkdir $dir1 || error "mkdir $dir1 failed"
+ ! getfattr -n trusted.lov $dir1 &> /dev/null ||
+ error "$dir1 shouldn't have LOV EA"
+
+ # delete the default layout on root directory
+ $LFS setstripe -d $MOUNT || error "delete root default layout failed"
+
+ local dir2=$MOUNT/$tdir-2
+ mkdir $dir2 || error "mkdir $dir2 failed"
+ ! getfattr -n trusted.lov $dir2 &> /dev/null ||
+ error "$dir2 shouldn't have LOV EA"
+
+ # set a new striping pattern on root directory
+ local def_stripe_size=$($LFS getstripe -S $MOUNT)
+ local new_def_stripe_size=$((def_stripe_size * 2))
+ $LFS setstripe -S $new_def_stripe_size $MOUNT ||
+ error "set stripe size on $MOUNT failed"
+
+ # new file created in $dir2 should inherit the new stripe size from
+ # the filesystem default
+ local file2=$dir2/$tfile-2
+ touch $file2 || error "touch $file2 failed"
+
+ local file2_stripe_size=$($LFS getstripe -S $file2)
+ [[ $file2_stripe_size -eq $new_def_stripe_size ]] ||
+ error "$file2 didn't inherit stripe size $new_def_stripe_size"
+
+ local dir3=$MOUNT/$tdir-3
+ mkdir $dir3 || error "mkdir $dir3 failed"
+ ! getfattr -n trusted.lov $dir3 &> /dev/null ||
+ error "$dir3 shouldn't have LOV EA"
+
+ # set OST pool on root directory
+ local pool=$TESTNAME
+ pool_add $pool || error "add $pool failed"
+ pool_add_targets $pool 0 $((OSTCOUNT - 1)) 1 ||
+ error "add targets to $pool failed"
+
+ $LFS setstripe -p $pool $MOUNT ||
+ error "set OST pool on $MOUNT failed"
+
+ # new file created in $dir3 should inherit the pool from
+ # the filesystem default
+ local file3=$dir3/$tfile-3
+ touch $file3 || error "touch $file3 failed"
+
+ local file3_pool=$($LFS getstripe -p $file3)
+ [[ "$file3_pool" = "$pool" ]] ||
+ error "$file3 didn't inherit OST pool $pool"
+
+ local dir4=$MOUNT/$tdir-4
+ mkdir $dir4 || error "mkdir $dir4 failed"
+ ! getfattr -n trusted.lov $dir4 &> /dev/null ||
+ error "$dir4 shouldn't have LOV EA"
+
+ # new file created in $dir4 should inherit the pool from
+ # the filesystem default
+ local file4=$dir4/$tfile-4
+ touch $file4 || error "touch $file4 failed"
+
+ local file4_pool=$($LFS getstripe -p $file4)
+ [[ "$file4_pool" = "$pool" ]] ||
+ error "$file4 didn't inherit OST pool $pool"
+
+ # new subdirectory under non-root directory should inherit
+ # the default layout from its parent directory
+ $LFS setstripe -S $new_def_stripe_size -p $pool $dir4 ||
+ error "set directory layout on $dir4 failed"
+
+ local dir5=$dir4/$tdir-5
+ mkdir $dir5 || error "mkdir $dir5 failed"
+
+ local dir4_layout=$(get_layout_param $dir4)
+ local dir5_layout=$(get_layout_param $dir5)
+ [[ "$dir4_layout" = "$dir5_layout" ]] ||
+ error "$dir5 should inherit the default layout from $dir4"
+}
+run_test 65n "don't inherit default layout from root for new subdirectories"
+
# bug 2543 - update blocks count on client
test_66() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
local STRIPE_SIZE=1048576
local FILE_LENGTH=$((STRIPE_SIZE*100))
local nreads=10000
+ local rsize=65536
local osc_rpc_stats
setup_test101bc $STRIPE_SIZE $FILE_LENGTH
cancel_lru_locks osc
$LCTL set_param osc.*.rpc_stats 0
- $READS -f $DIR/$tfile -s$FILE_LENGTH -b65536 -n$nreads -t 180
+ $READS -f $DIR/$tfile -s$FILE_LENGTH -b$rsize -n$nreads -t 180
for osc_rpc_stats in $($LCTL get_param -N osc.*.rpc_stats); do
local stats=$($LCTL get_param -n $osc_rpc_stats)
local lines=$(echo "$stats" | awk 'END {print NR;}')
for size in 1 2 4 8; do
local rpc=$(echo "$stats" |
awk '($1 == "'$size':") {print $2; exit; }')
- [ $rpc != 0 ] &&
- error "Small $((size*4))k read IO $rpc !"
+ [ $rpc != 0 ] && ((size * PAGE_SIZE < rsize)) &&
+ error "Small $((size*PAGE_SIZE)) read IO $rpc!"
done
echo "$osc_rpc_stats check passed!"
done
local nbcl=$(changelog_dump | wc -l)
[[ $nbcl -eq 0 ]] && error "no changelogs found"
- for param in "changelog_max_idle_indexes=$((nbcl / 2))" \
+ # reduce the max_idle_indexes value to make sure we exceed it
+ max_ndx=$((nbcl / 2 - 1))
+
+ for param in "changelog_max_idle_indexes=$max_ndx" \
"changelog_gc=1" \
"changelog_min_gc_interval=2" \
"changelog_min_free_cat_entries=3"; do
remote_mds_nodsh && skip "remote MDS with nodsh"
local old_iused=$($LFS df -i | grep OST0000 | awk '{ print $3 }')
+ local mdts=$(comma_list $(mdts_nodes))
mkdir -p $DIR/$tdir
$LFS setstripe -i 0 -c 1 $DIR/$tdir
# statfs data is not real time, let's just calculate it
old_iused=$((old_iused + 1000))
- local count=$(do_facet $SINGLEMDS "lctl get_param -n \
+ local count=$(do_facet $SINGLEMDS "$LCTL get_param -n \
osp.*OST0000*MDT0000.create_count")
- local max_count=$(do_facet $SINGLEMDS "lctl get_param -n \
+ local max_count=$(do_facet $SINGLEMDS "$LCTL get_param -n \
osp.*OST0000*MDT0000.max_create_count")
- for idx in $(seq $MDSCOUNT); do
- do_facet mds$idx "lctl set_param -n \
- osp.*OST0000*MDT000?.max_create_count=0"
- done
+ do_nodes $mdts "$LCTL set_param -n osp.*OST0000*.max_create_count=0"
$LFS setstripe -i 0 $DIR/$tdir/$tfile || error "setstripe failed"
local index=$($LFS getstripe -i $DIR/$tdir/$tfile)
unlinkmany $DIR/$tdir/$tfile. 1000
- for idx in $(seq $MDSCOUNT); do
- do_facet mds$idx "lctl set_param -n \
- osp.*OST0000*MDT000?.max_create_count=$max_count"
- do_facet mds$idx "lctl set_param -n \
- osp.*OST0000*MDT000?.create_count=$count"
- done
+ do_nodes $mdts "$LCTL set_param -n \
+ osp.*OST0000*.max_create_count=$max_count"
+ [ $(lustre_version_code $facet) -lt $(version_code 2.11.56) ] &&
+ do_nodes $mdts "$LCTL set_param -n \
+ osp.*OST0000*.create_count=$count"
+ do_nodes $mdts "$LCTL get_param osp.*OST0000*.create_count" |
+ grep "=0" && error "create_count is zero"
local new_iused
for i in $(seq 120); do
}
run_test 417 "disable remote dir, striped dir and dir migration"
+# Checks that the outputs of df [-i] and lfs df [-i] match
+#
+# usage: check_lfs_df <blocks | inodes> <mountpoint>
+check_lfs_df() {
+ local dir=$2
+ local inodes
+ local df_out
+ local lfs_df_out
+
+ # blocks or inodes
+ [ "$1" == "blocks" ] && inodes= || inodes="-i"
+
+ # read the lines of interest
+ df_out=($(df $inodes $dir | tail -n +2)) ||
+ error "df $inodes $dir | tail -n +2 failed"
+ lfs_df_out=($($LFS df $inodes $dir | grep filesystem_summary:)) ||
+ error "lfs df $inodes $dir | grep filesystem_summary: failed"
+
+ # skip the first substrings of each command output as they are different
+ # <NID>:/<fsname for df, filesystem_summary: for lfs df
+ df_out=(${df_out[@]:1})
+ lfs_df_out=(${lfs_df_out[@]:1})
+
+ # compare the two outputs
+ for i in {0..4}; do
+ [ "${df_out[i]}" != "${lfs_df_out[i]}" ] &&
+ error "df and lfs df output mismatch:" \
+ "df${inodes}: ${df_out[*]}," \
+ "lfs df${inodes}: ${lfs_df_out[*]}"
+ done
+}
+
+test_418() {
+ local dir=$DIR/$tdir
+ local numfiles=$((RANDOM % 4096 + 2))
+ local numblocks=$((RANDOM % 256 + 1))
+
+ wait_delete_completed
+ test_mkdir $dir
+
+ # check block output
+ check_lfs_df blocks $dir
+ # check inode output
+ check_lfs_df inodes $dir
+
+ # create a single file and retest
+ echo "Creating a single file and testing"
+ createmany -o $dir/$tfile- 1 &>/dev/null ||
+ error "creating 1 file in $dir failed"
+ cancel_lru_locks osc
+ sync; sleep 2
+ check_lfs_df blocks $dir
+ check_lfs_df inodes $dir
+
+ # create a random number of files
+ echo "Creating $((numfiles - 1)) files and testing"
+ createmany -o $dir/$tfile- 1 $((numfiles - 1)) &>/dev/null ||
+ error "creating $((numfiles - 1)) files in $dir failed"
+
+ # write a random number of blocks to the first test file
+ echo "Writing $numblocks 4K blocks and testing"
+ dd if=/dev/urandom of=$dir/${tfile}-0 bs=4K conv=fsync \
+ count=$numblocks &>/dev/null ||
+ error "dd to $dir/${tfile}-0 failed"
+
+ # retest
+ cancel_lru_locks osc
+ sync; sleep 10
+ check_lfs_df blocks $dir
+ check_lfs_df inodes $dir
+
+ unlinkmany $dir/$tfile- $numfiles &>/dev/null ||
+ error "unlinking $numfiles files in $dir failed"
+}
+run_test 418 "df and lfs df outputs match"
+
prep_801() {
[[ $(lustre_version_code mds1) -lt $(version_code 2.9.55) ]] ||
[[ $OST1_VERSION -lt $(version_code 2.9.55) ]] &&
local save="$TMP/$TESTSUITE-$TESTNAME.parameters"
save_lustre_params client "llite.*.xattr_cache" > $save
lctl set_param llite.*.xattr_cache=0
- stack_trap "restore_lustre_params < $save" EXIT
+ stack_trap "restore_lustre_params < $save; rm -f $save" EXIT
# single-threaded write
echo "Test SOM for single-threaded write"
local save="$TMP/$TESTSUITE-$TESTNAME.parameters"
save_lustre_params client "llite.*.xattr_cache" > $save
lctl set_param llite.*.xattr_cache=0
- stack_trap "restore_lustre_params < $save" EXIT
+ stack_trap "restore_lustre_params < $save; rm -f $save" EXIT
rm -rf $DIR/$tdir || error "rm $tdir failed"
mkdir -p $DIR/$tdir || error "mkdir $tdir failed"
git://git.whamcloud.com / fs / lustre-release.git / blobdiff