ALWAYS_EXCEPT+=" 411"
fi
-# 5 12 (min)"
+# 5 12 8 12 (min)"
[ "$SLOW" = "no" ] && EXCEPT_SLOW="27m 64b 68 71 115 135 136 300o"
if [ "$mds1_FSTYPE" = "zfs" ]; then
echo "done."
echo -n "Removing test file from pool '$pool'..."
- $LFS migrate $file1 &> /dev/null ||
+ # "lfs migrate $file" won't remove the file from the pool
+ # until some striping information is changed.
+ $LFS migrate -c 1 $file1 &> /dev/null ||
error "cannot remove from pool"
[ "$($LFS getstripe -p $file1)" ] &&
error "pool still set"
test_56wc() {
local file1="$DIR/$tdir/file1"
+ local parent_ssize
+ local parent_scount
+ local cur_ssize
+ local cur_scount
+ local orig_ssize
echo -n "Creating test dir..."
test_mkdir $DIR/$tdir &> /dev/null || error "cannot create dir"
- local def_stripe_size=$($LFS getstripe -S $DIR/$tdir 2>/dev/null)
$LFS setstripe -S 1M -c 1 "$DIR/$tdir" &> /dev/null ||
- error "cannot set stripe"
+ error "cannot set stripe by '-S 1M -c 1'"
echo "done"
echo -n "Setting initial stripe for test file..."
$LFS setstripe -S 512K -c 1 "$file1" &> /dev/null ||
error "cannot set stripe"
- [ $($LFS getstripe -S "$file1") -eq 524288 ] ||
- error "stripe size not set"
+ cur_ssize=$($LFS getstripe -S "$file1")
+ [ $cur_ssize -eq 524288 ] || error "setstripe -S $cur_ssize != 524288"
echo "done."
# File currently set to -S 512K -c 1
echo -n "Verifying -S option is passed through to lfs migrate..."
$LFS_MIGRATE -y -S 1M "$file1" &> /dev/null ||
error "migration failed"
- [ $($LFS getstripe -S "$file1") -eq 1048576 ] ||
- error "file was not restriped"
+ cur_ssize=$($LFS getstripe -S "$file1")
+ [ $cur_ssize -eq 1048576 ] || error "migrate -S $cur_ssize != 1048576"
echo "done."
# File currently set to -S 1M -c 1
error "long option without argument not supported"
$LFS_MIGRATE -y --stripe-size 512K "$file1" &> /dev/null ||
error "long option with argument not supported"
- [ $($LFS getstripe -S "$file1") -eq 524288 ] ||
- error "file not restriped with --stripe-size option"
+ cur_ssize=$($LFS getstripe -S "$file1")
+ [ $cur_ssize -eq 524288 ] ||
+ error "migrate --stripe-size $cur_ssize != 524288"
echo "done."
# File currently set to -S 512K -c 1
echo -n "Verifying explicit stripe count can be set..."
$LFS_MIGRATE -y -c 2 "$file1" &> /dev/null ||
error "migrate failed"
- [ $($LFS getstripe -c "$file1") -eq 2 ] ||
- error "file not restriped to explicit count"
+ cur_scount=$($LFS getstripe -c "$file1")
+ [ $cur_scount -eq 2 ] || error "migrate -c $cur_scount != 2"
echo "done."
fi
# Ensure parent striping is used if -R is set, and no stripe
# count or size is specified
echo -n "Setting stripe for parent directory..."
- $LFS setstripe -S 1M -c 1 "$DIR/$tdir" &> /dev/null ||
- error "cannot set stripe"
+ $LFS setstripe -S 2M -c 1 "$DIR/$tdir" &> /dev/null ||
+ error "cannot set stripe '-S 2M -c 1'"
echo "done."
echo -n "Verifying restripe option uses parent stripe settings..."
+ parent_ssize=$($LFS getstripe -S $DIR/$tdir 2>/dev/null)
+ parent_scount=$($LFS getstripe -c $DIR/$tdir 2>/dev/null)
$LFS_MIGRATE -y -R "$file1" &> /dev/null ||
error "migrate failed"
- [ $($LFS getstripe -S "$file1") -eq $def_stripe_size ] ||
- error "file not restriped to parent settings"
- [ $($LFS getstripe -c "$file1") -eq 1 ] ||
- error "file not restriped to parent settings"
+ cur_ssize=$($LFS getstripe -S "$file1")
+ [ $cur_ssize -eq $parent_ssize ] ||
+ error "migrate -R stripe_size $cur_ssize != $parent_ssize"
+ cur_scount=$($LFS getstripe -c "$file1")
+ [ $cur_scount -eq $parent_scount ] ||
+ error "migrate -R stripe_count $cur_scount != $parent_scount"
echo "done."
# File currently set to -S 1M -c 1
# Ensure striping is preserved if -R is not set, and no stripe
# count or size is specified
echo -n "Verifying striping size preserved when not specified..."
- local orig_stripe_size=$($LFS getstripe -S "$file1" 2>/dev/null)
+ orig_ssize=$($LFS getstripe -S "$file1" 2>/dev/null)
$LFS setstripe -S 2M -c 1 "$DIR/$tdir" &> /dev/null ||
error "cannot set stripe on parent directory"
$LFS_MIGRATE -y "$file1" &> /dev/null ||
error "migrate failed"
- [ $($LFS getstripe -S "$file1") -eq $orig_stripe_size ] ||
- error "file was restriped"
+ cur_ssize=$($LFS getstripe -S "$file1")
+ [ $cur_ssize -eq $orig_ssize ] ||
+ error "migrate by default $cur_ssize != $orig_ssize"
echo "done."
# Ensure file name properly detected when final option has no argument
}
run_test 56xc "lfs migration autostripe"
+test_56xd() {
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs"
+
+ local dir=$DIR/$tdir
+ local f_mgrt=$dir/$tfile.mgrt
+ local f_yaml=$dir/$tfile.yaml
+ local f_copy=$dir/$tfile.copy
+ local layout_yaml="-E 1M -S 512K -c 1 -E -1 -S 1M -c 2 -i 0"
+ local layout_copy="-c 2 -S 2M -i 1"
+ local yamlfile=$dir/yamlfile
+ local layout_before;
+ local layout_after;
+
+ test_mkdir "$dir" || error "cannot create dir $dir"
+ $LFS setstripe $layout_yaml $f_yaml ||
+ error "cannot setstripe $f_yaml with layout $layout_yaml"
+ $LFS getstripe --yaml $f_yaml > $yamlfile
+ $LFS setstripe $layout_copy $f_copy ||
+ error "cannot setstripe $f_copy with layout $layout_copy"
+ touch $f_mgrt
+ dd if=/dev/zero of=$f_mgrt bs=1M count=4
+
+ # 1. test option --yaml
+ $LFS_MIGRATE -y --yaml $yamlfile $f_mgrt ||
+ error "cannot migrate $f_mgrt with --yaml $yamlfile"
+ layout_before=$(get_layout_param $f_yaml)
+ layout_after=$(get_layout_param $f_mgrt)
+ [ "$layout_after" == "$layout_before" ] ||
+ error "lfs_migrate --yaml: $layout_after != $layout_before"
+
+ # 2. test option --copy
+ $LFS_MIGRATE -y --copy $f_copy $f_mgrt ||
+ error "cannot migrate $f_mgrt with --copy $f_copy"
+ layout_before=$(get_layout_param $f_copy)
+ layout_after=$(get_layout_param $f_mgrt)
+ [ "$layout_after" == "$layout_before" ] ||
+ error "lfs_migrate --copy: $layout_after != $layout_before"
+}
+run_test 56xd "check lfs_migrate --yaml and --copy support"
+
+test_56xe() {
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs"
+
+ local dir=$DIR/$tdir
+ local f_comp=$dir/$tfile
+ local layout="-E 1M -S 512K -c 1 -E -1 -S 1M -c 2 -i 0"
+ local layout_before=""
+ local layout_after=""
+
+ test_mkdir "$dir" || error "cannot create dir $dir"
+ $LFS setstripe $layout $f_comp ||
+ error "cannot setstripe $f_comp with layout $layout"
+ layout_before=$(get_layout_param $f_comp)
+ dd if=/dev/zero of=$f_comp bs=1M count=4
+
+ # 1. migrate a comp layout file by lfs_migrate
+ $LFS_MIGRATE -y $f_comp || error "cannot migrate $f_comp by lfs_migrate"
+ layout_after=$(get_layout_param $f_comp)
+ [ "$layout_before" == "$layout_after" ] ||
+ error "lfs_migrate: $layout_before != $layout_after"
+
+ # 2. migrate a comp layout file by lfs migrate
+ $LFS migrate $f_comp || error "cannot migrate $f_comp by lfs migrate"
+ layout_after=$(get_layout_param $f_comp)
+ [ "$layout_before" == "$layout_after" ] ||
+ error "lfs migrate: $layout_before != $layout_after"
+}
+run_test 56xe "migrate a composite layout file"
+
test_56y() {
[ $MDS1_VERSION -lt $(version_code 2.4.53) ] &&
skip "No HSM $(lustre_build_version $SINGLEMDS) MDS < 2.4.53"
local fname
mkdir -p $DIR/$tdir || error "failed to create $DIR/$tdir"
- $SETSTRIPE -c 1 -i 0 $DIR/$tdir || error "failed to set striping"
+ $LFS setstripe -c 1 -i 0 $DIR/$tdir || error "failed to set striping"
#set only one record at plain llog
#define OBD_FAIL_CATALOG_FULL_CHECK 0x131a
do_facet $SINGLEMDS $LCTL set_param fail_loc=0x131a fail_val=1
}
run_test 422 "kill a process with RPC in progress"
+stat_test() {
+ df -h $MOUNT &
+ df -h $MOUNT &
+ df -h $MOUNT &
+ df -h $MOUNT &
+ df -h $MOUNT &
+ df -h $MOUNT &
+}
+
+test_423() {
+ local _stats
+ # ensure statfs cache is expired
+ sleep 2;
+
+ _stats=$(stat_test | grep $MOUNT | sort -u | wc -l)
+ [[ ${_stats} -ne 1 ]] && error "statfs wrong"
+
+ return 0
+}
+run_test 423 "statfs should return a right data"
+
prep_801() {
[[ $MDS1_VERSION -lt $(version_code 2.9.55) ]] ||
[[ $OST1_VERSION -lt $(version_code 2.9.55) ]] &&
git://git.whamcloud.com / fs / lustre-release.git / blobdiff