set -e
ONLY=${ONLY:-"$*"}
-# bug number for skipped test: 2108 9789 3637 9789 3561 12653 12653 13310 10764
-ALWAYS_EXCEPT=" 42a 42b 42c 42d 45 65a 65e 74b 75 $SANITY_EXCEPT"
+# bug number for skipped test: 2108 9789 3637 9789 3561 12622 12653 12653 5188 10764 16260
+ALWAYS_EXCEPT=" 42a 42b 42c 42d 45 51d 65a 65e 68 75 119d $SANITY_EXCEPT"
# bug number for skipped test: 2108 9789 3637 9789 3561 5188/5749 1443
#ALWAYS_EXCEPT=${ALWAYS_EXCEPT:-"27m 42a 42b 42c 42d 45 68 76"}
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
*) error "unsupported kernel" ;;
esac
-SRCDIR=`dirname $0`
-export PATH=$PWD/$SRCDIR:$SRCDIR:$SRCDIR/../utils:$PATH:/sbin
+SRCDIR=$(cd $(dirname $0); echo $PWD)
+export PATH=$PATH:/sbin
TMP=${TMP:-/tmp}
MCREATE=${MCREATE:-mcreate}
OPENFILE=${OPENFILE:-openfile}
OPENUNLINK=${OPENUNLINK:-openunlink}
-RANDOM_READS=${RANDOM_READS:-"random-reads"}
+READS=${READS:-"reads"}
TOEXCL=${TOEXCL:-toexcl}
TRUNCATE=${TRUNCATE:-truncate}
MUNLINK=${MUNLINK:-munlink}
CLEANUP=${CLEANUP:-:}
SETUP=${SETUP:-:}
TRACE=${TRACE:-""}
-LUSTRE=${LUSTRE:-`dirname $0`/..}
+LUSTRE=${LUSTRE:-$(cd $(dirname $0)/..; echo $PWD)}
. $LUSTRE/tests/test-framework.sh
init_test_env $@
. ${CONFIG:=$LUSTRE/tests/cfg/${NAME}.sh}
check_and_setup_lustre
DIR=${DIR:-$MOUNT}
-[ -z "`echo $DIR | grep $MOUNT`" ] && echo "$DIR not in $MOUNT" && exit 99
+assert_DIR
LOVNAME=`lctl get_param -n llite.*.lov.common_name | tail -n 1`
OSTCOUNT=`lctl get_param -n lov.$LOVNAME.numobd`
build_test_filter
-if [ "${ONLY}" = "MOUNT" ] ; then
+if [ "${ONLY}" = "MOUNT" ] ; then
echo "Lustre is up, please go on"
exit
fi
test_22() {
WDIR=$DIR/$tdir
+ mkdir -p $WDIR
chown $RUNAS_ID $WDIR
(cd $WDIR || error "cd $WDIR failed";
$RUNAS tar cf - /etc/hosts /etc/sysconfig/network | \
run_test 24d "mkdir .../R4/{f,g}; rename .../R4/f .../R4/g ====="
test_24e() {
- echo '-- cross directory renames --'
+ echo '-- cross directory renames --'
mkdir $DIR/R5{a,b}
touch $DIR/R5a/f
mv $DIR/R5a/f $DIR/R5b/g
$CHECKSTAT -a $DIR/R10/f || error
$CHECKSTAT -a $DIR/R10/g || error
}
-run_test 24j "source does not exist ============================"
+run_test 24j "source does not exist ============================"
test_24k() {
mkdir $DIR/R11a $DIR/R11a/d
# recursive symlinks (bug 7022)
test_26f() {
+ mkdir -p $DIR/$tdir
mkdir $DIR/$tdir/$tfile || error "mkdir $DIR/$tdir/$tfile failed"
cd $DIR/$tdir/$tfile || error "cd $DIR/$tdir/$tfile failed"
mkdir -p lndir/bar1 || error "mkdir lndir/bar1 failed"
lctl set_param fail_loc=0
TLOG=$DIR/$tfile.getstripe
- $GETSTRIPE $DIR/d27u > $TLOG
+ $GETSTRIPE $DIR/d27u > $TLOG
OBJS=`awk -vobj=0 '($1 == 0) { obj += 1 } END { print obj;}' $TLOG`
unlinkmany $DIR/d27u/t- 1000
[ $OBJS -gt 0 ] && \
test_32a() {
echo "== more mountpoints and symlinks ================="
[ -e $DIR/d32a ] && rm -fr $DIR/d32a
- mkdir -p $DIR/d32a/ext2-mountpoint
+ mkdir -p $DIR/d32a/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32a/ext2-mountpoint || error
- $CHECKSTAT -t dir $DIR/d32a/ext2-mountpoint/.. || error
+ $CHECKSTAT -t dir $DIR/d32a/ext2-mountpoint/.. || error
$UMOUNT $DIR/d32a/ext2-mountpoint || error
}
run_test 32a "stat d32a/ext2-mountpoint/.. ====================="
test_32b() {
[ -e $DIR/d32b ] && rm -fr $DIR/d32b
- mkdir -p $DIR/d32b/ext2-mountpoint
+ mkdir -p $DIR/d32b/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32b/ext2-mountpoint || error
ls -al $DIR/d32b/ext2-mountpoint/.. || error
$UMOUNT $DIR/d32b/ext2-mountpoint || error
}
run_test 32b "open d32b/ext2-mountpoint/.. ====================="
-
+
test_32c() {
[ -e $DIR/d32c ] && rm -fr $DIR/d32c
- mkdir -p $DIR/d32c/ext2-mountpoint
+ mkdir -p $DIR/d32c/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32c/ext2-mountpoint || error
- mkdir -p $DIR/d32c/d2/test_dir
+ mkdir -p $DIR/d32c/d2/test_dir
$CHECKSTAT -t dir $DIR/d32c/ext2-mountpoint/../d2/test_dir || error
$UMOUNT $DIR/d32c/ext2-mountpoint || error
}
test_32d() {
[ -e $DIR/d32d ] && rm -fr $DIR/d32d
- mkdir -p $DIR/d32d/ext2-mountpoint
+ mkdir -p $DIR/d32d/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32d/ext2-mountpoint || error
- mkdir -p $DIR/d32d/d2/test_dir
+ mkdir -p $DIR/d32d/d2/test_dir
ls -al $DIR/d32d/ext2-mountpoint/../d2/test_dir || error
$UMOUNT $DIR/d32d/ext2-mountpoint || error
}
test_32e() {
[ -e $DIR/d32e ] && rm -fr $DIR/d32e
- mkdir -p $DIR/d32e/tmp
- TMP_DIR=$DIR/d32e/tmp
- ln -s $DIR/d32e $TMP_DIR/symlink11
- ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
+ mkdir -p $DIR/d32e/tmp
+ TMP_DIR=$DIR/d32e/tmp
+ ln -s $DIR/d32e $TMP_DIR/symlink11
+ ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
$CHECKSTAT -t link $DIR/d32e/tmp/symlink11 || error
$CHECKSTAT -t link $DIR/d32e/symlink01 || error
}
test_32f() {
[ -e $DIR/d32f ] && rm -fr $DIR/d32f
- mkdir -p $DIR/d32f/tmp
- TMP_DIR=$DIR/d32f/tmp
- ln -s $DIR/d32f $TMP_DIR/symlink11
- ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
+ mkdir -p $DIR/d32f/tmp
+ TMP_DIR=$DIR/d32f/tmp
+ ln -s $DIR/d32f $TMP_DIR/symlink11
+ ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
ls $DIR/d32f/tmp/symlink11 || error
ls $DIR/d32f/symlink01 || error
}
run_test 32f "open d32f/symlink->tmp/symlink->lustre-subdir ===="
test_32g() {
- TMP_DIR=$DIR/$tdir/tmp
+ TMP_DIR=$DIR/$tdir/tmp
mkdir -p $TMP_DIR $DIR/${tdir}2
- ln -s $DIR/${tdir}2 $TMP_DIR/symlink12
- ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
+ ln -s $DIR/${tdir}2 $TMP_DIR/symlink12
+ ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
$CHECKSTAT -t link $TMP_DIR/symlink12 || error
$CHECKSTAT -t link $DIR/$tdir/symlink02 || error
$CHECKSTAT -t dir -f $TMP_DIR/symlink12 || error
test_32h() {
rm -fr $DIR/$tdir $DIR/${tdir}2
- TMP_DIR=$DIR/$tdir/tmp
- mkdir -p $TMP_DIR $DIR/${tdir}2
- ln -s $DIR/${tdir}2 $TMP_DIR/symlink12
- ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
+ TMP_DIR=$DIR/$tdir/tmp
+ mkdir -p $TMP_DIR $DIR/${tdir}2
+ ln -s $DIR/${tdir}2 $TMP_DIR/symlink12
+ ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
ls $TMP_DIR/symlink12 || error
ls $DIR/$tdir/symlink02 || error
}
test_32i() {
[ -e $DIR/d32i ] && rm -fr $DIR/d32i
- mkdir -p $DIR/d32i/ext2-mountpoint
+ mkdir -p $DIR/d32i/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32i/ext2-mountpoint || error
touch $DIR/d32i/test_file
- $CHECKSTAT -t file $DIR/d32i/ext2-mountpoint/../test_file || error
+ $CHECKSTAT -t file $DIR/d32i/ext2-mountpoint/../test_file || error
$UMOUNT $DIR/d32i/ext2-mountpoint || error
}
run_test 32i "stat d32i/ext2-mountpoint/../test_file ==========="
test_32j() {
[ -e $DIR/d32j ] && rm -fr $DIR/d32j
- mkdir -p $DIR/d32j/ext2-mountpoint
+ mkdir -p $DIR/d32j/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32j/ext2-mountpoint || error
touch $DIR/d32j/test_file
cat $DIR/d32j/ext2-mountpoint/../test_file || error
test_32k() {
rm -fr $DIR/d32k
- mkdir -p $DIR/d32k/ext2-mountpoint
- mount -t ext2 -o loop $EXT2_DEV $DIR/d32k/ext2-mountpoint
+ mkdir -p $DIR/d32k/ext2-mountpoint
+ mount -t ext2 -o loop $EXT2_DEV $DIR/d32k/ext2-mountpoint
mkdir -p $DIR/d32k/d2
touch $DIR/d32k/d2/test_file || error
$CHECKSTAT -t file $DIR/d32k/ext2-mountpoint/../d2/test_file || error
test_32l() {
rm -fr $DIR/d32l
- mkdir -p $DIR/d32l/ext2-mountpoint
+ mkdir -p $DIR/d32l/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32l/ext2-mountpoint || error
mkdir -p $DIR/d32l/d2
touch $DIR/d32l/d2/test_file
test_32m() {
rm -fr $DIR/d32m
- mkdir -p $DIR/d32m/tmp
- TMP_DIR=$DIR/d32m/tmp
- ln -s $DIR $TMP_DIR/symlink11
- ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
+ mkdir -p $DIR/d32m/tmp
+ TMP_DIR=$DIR/d32m/tmp
+ ln -s $DIR $TMP_DIR/symlink11
+ ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
$CHECKSTAT -t link $DIR/d32m/tmp/symlink11 || error
$CHECKSTAT -t link $DIR/d32m/symlink01 || error
}
test_32n() {
rm -fr $DIR/d32n
- mkdir -p $DIR/d32n/tmp
- TMP_DIR=$DIR/d32n/tmp
- ln -s $DIR $TMP_DIR/symlink11
- ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
+ mkdir -p $DIR/d32n/tmp
+ TMP_DIR=$DIR/d32n/tmp
+ ln -s $DIR $TMP_DIR/symlink11
+ ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
ls -l $DIR/d32n/tmp/symlink11 || error
ls -l $DIR/d32n/symlink01 || error
}
test_32o() {
rm -fr $DIR/d32o $DIR/$tfile
- touch $DIR/$tfile
- mkdir -p $DIR/d32o/tmp
- TMP_DIR=$DIR/d32o/tmp
- ln -s $DIR/$tfile $TMP_DIR/symlink12
- ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
+ touch $DIR/$tfile
+ mkdir -p $DIR/d32o/tmp
+ TMP_DIR=$DIR/d32o/tmp
+ ln -s $DIR/$tfile $TMP_DIR/symlink12
+ ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
$CHECKSTAT -t link $DIR/d32o/tmp/symlink12 || error
$CHECKSTAT -t link $DIR/d32o/symlink02 || error
$CHECKSTAT -t file -f $DIR/d32o/tmp/symlink12 || error
log 32p_2
rm -f $DIR/$tfile
log 32p_3
- touch $DIR/$tfile
+ touch $DIR/$tfile
log 32p_4
- mkdir -p $DIR/d32p/tmp
+ mkdir -p $DIR/d32p/tmp
log 32p_5
- TMP_DIR=$DIR/d32p/tmp
+ TMP_DIR=$DIR/d32p/tmp
log 32p_6
- ln -s $DIR/$tfile $TMP_DIR/symlink12
+ ln -s $DIR/$tfile $TMP_DIR/symlink12
log 32p_7
- ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
+ ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
log 32p_8
cat $DIR/d32p/tmp/symlink12 || error
log 32p_9
run_test 34b "O_RDONLY opening file doesn't create objects ====="
test_34c() {
- [ ! -f $DIR/f34 ] && test_34a
+ [ ! -f $DIR/f34 ] && test_34a
$CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
$OPENFILE -f O_RDWR $DIR/f34
$GETSTRIPE $DIR/f34 2>&1 | grep -q "no stripe info" && error
run_test 34c "O_RDWR opening file-with-size works =============="
test_34d() {
- [ ! -f $DIR/f34 ] && test_34a
+ [ ! -f $DIR/f34 ] && test_34a
dd if=/dev/zero of=$DIR/f34 conv=notrunc bs=4k count=1 || error
$CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
rm $DIR/f34
run_test 42d "test complete truncate of file with cached dirty data"
test_43() {
+ mkdir -p $DIR/$tdir
cp -p /bin/ls $DIR/$tdir/$tfile
multiop $DIR/$tdir/$tfile Ow_c &
pid=$!
# in a 2 stripe file (lov.sh), page 1023 maps to page 511 in its object. this
# test tickles a bug where re-dirtying a page was failing to be mapped to the
-# objects offset and an assert hit when an rpc was built with 1023's mapped
+# objects offset and an assert hit when an rpc was built with 1023's mapped
# offset 511 and 511's raw 511 offset. it also found general redirtying bugs.
test_46() {
f="$DIR/f46"
}
run_test 50 "special situations: /proc symlinks ==============="
-test_51() {
+test_51a() { # was test_51
# bug 1516 - create an empty entry right after ".." then split dir
mkdir $DIR/d51
touch $DIR/d51/foo
echo
ls -l $DIR/d51 > /dev/null || error
}
-run_test 51 "special situations: split htree with empty entry =="
+run_test 51a "special situations: split htree with empty entry =="
#export NUMTEST=70000
# FIXME: I select a relatively small number to do basic test.
error "OST $N has less objects vs OST $NLAST (${OBJS[$N]} < ${OBJS[$NLAST]}"
[ ${OBJS[$N]} -gt $((${OBJS[$NLAST]} + 20)) ] && \
error "OST $N has less objects vs OST $NLAST (${OBJS[$N]} < ${OBJS[$NLAST]}"
-
+
[ ${OBJS0[$N]} -lt $((${OBJS0[$NLAST]} - 20)) ] && \
error "OST $N has less #0 objects vs OST $NLAST (${OBJS0[$N]} < ${OBJS0[$NLAST]}"
[ ${OBJS0[$N]} -gt $((${OBJS0[$NLAST]} + 20)) ] && \
test_53() {
remote_mds && skip "remote MDS" && return
- # only test MDT0000
+ # only test MDT0000
for value in `lctl get_param osc.*-osc-MDT0000.prealloc_last_id` ; do
param=`echo ${value[0]} | cut -d "=" -f1`
ostname=`echo $param | cut -d "." -f2 | cut -d - -f 1-2`
f="$DIR/f54b"
mknod $f c 1 3
chmod 0666 $f
- dd if=/dev/zero of=$f bs=`page_size` count=1
+ dd if=/dev/zero of=$f bs=`page_size` count=1
}
run_test 54b "char device works in lustre ======================"
tdir="$DIR/d54c"
loopdev="$DIR/loop54c"
- find_loop_dev
+ find_loop_dev
[ -z "$LOOPNUM" ] && echo "couldn't find empty loop device" && return
mknod $loopdev b 7 $LOOPNUM
echo "make a loop file system with $tfile on $loopdev ($LOOPNUM)..."
}
run_test 55 "check iopen_connect_dentry() ======================"
-test_56() {
+test_56a() { # was test_56
rm -rf $DIR/d56
$SETSTRIPE -d $DIR
mkdir $DIR/d56
error "lfs getstripe --obd wrong: should not show file on other obd"
echo "lfs getstripe --obd passed."
}
-run_test 56 "check lfs getstripe ===================================="
+run_test 56a "check lfs getstripe ===================================="
NUMFILES=3
NUMDIRS=3
}
run_test 56o "check lfs find -mtime for old files =========================="
+test_56p() {
+ [ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID = UID = $UID -- skipping" && return
+
+ TDIR=$DIR/${tdir}g
+ rm -rf $TDIR
+
+ setup_56 $NUMFILES $NUMDIRS
+
+ chown $RUNAS_ID $TDIR/file* || error "chown $DIR/${tdir}g/file$i failed"
+ EXPECTED=$NUMFILES
+ NUMS="`$LFIND -uid $RUNAS_ID $TDIR | wc -l`"
+ [ $NUMS -eq $EXPECTED ] || \
+ error "lfs find -uid $TDIR wrong: found $NUMS, expected $EXPECTED"
+
+ EXPECTED=$(( ($NUMFILES+1) * $NUMDIRS + 1))
+ NUMS="`$LFIND ! -uid $RUNAS_ID $TDIR | wc -l`"
+ [ $NUMS -eq $EXPECTED ] || \
+ error "lfs find ! -uid $TDIR wrong: found $NUMS, expected $EXPECTED"
+
+ echo "lfs find -uid and ! -uid passed."
+}
+run_test 56p "check lfs find -uid and ! -uid ==============================="
+
+test_56q() {
+ [ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID = UID = $UID -- skipping" && return
+
+ TDIR=$DIR/${tdir}g
+ rm -rf $TDIR
+
+ setup_56 $NUMFILES $NUMDIRS
+
+ chgrp $RUNAS_ID $TDIR/file* || error "chown $DIR/${tdir}g/file$i failed"
+ EXPECTED=$NUMFILES
+ NUMS="`$LFIND -gid $RUNAS_ID $TDIR | wc -l`"
+ [ $NUMS -eq $EXPECTED ] || \
+ error "lfs find -gid $TDIR wrong: found $NUMS, expected $EXPECTED"
+
+ EXPECTED=$(( ($NUMFILES+1) * $NUMDIRS + 1))
+ NUMS="`$LFIND ! -gid $RUNAS_ID $TDIR | wc -l`"
+ [ $NUMS -eq $EXPECTED ] || \
+ error "lfs find ! -gid $TDIR wrong: found $NUMS, expected $EXPECTED"
+
+ echo "lfs find -gid and ! -gid passed."
+}
+run_test 56q "check lfs find -gid and ! -gid ==============================="
+
test_57a() {
# note test will not do anything if MDS is not local
remote_mds && skip "remote MDS" && return
local MNTDEV="osd.*MDT*.mntdev"
DEV=$(lctl get_param -n $MNTDEV)
- [ -z "$DEV" ] && error "can't access $MNTDEV"
+ [ -z "$DEV" ] && error "can't access $MNTDEV"
for DEV in `lctl get_param -n $MNTDEV`; do
dumpe2fs -h $DEV > $TMP/t57a.dump || error "can't access $DEV"
DEVISIZE=`awk '/Inode size:/ { print $3 }' $TMP/t57a.dump`
test_60a() {
[ ! -f run-llog.sh ] && skip "missing subtest run-llog.sh" && return
log "$TEST60_HEAD - from kernel mode"
-# sh run-llog.sh
+ sh run-llog.sh
}
run_test 60a "llog sanity tests run from kernel module =========="
[ $LLOG_COUNT -gt 50 ] && error "CDEBUG_LIMIT not limiting messages ($LLOG_COUNT)"|| true
}
run_test 60b "limit repeated messages from CERROR/CWARN ========"
-
+
test_60c() {
- echo "create 5000 files"
+ echo "create 5000 files"
createmany -o $DIR/f60c- 5000
#define OBD_FAIL_MDS_LLOG_CREATE_FAILED 0x13c
lctl set_param fail_loc=0x8000013c
cat $f && error "cat succeeded, expect -EIO"
lctl set_param fail_loc=0
}
-run_test 62 "verify obd_match failure doesn't LBUG (should -EIO)"
+# This test is now irrelevant (as of bug 10718 inclusion), we no longer
+# match every page all of the time.
+#run_test 62 "verify obd_match failure doesn't LBUG (should -EIO)"
# bug 2319 - oig_wait() interrupted causes crash because of invalid waitq.
-test_63() {
+test_63a() { # was test_63
MAX_DIRTY_MB=`lctl get_param -n osc.*.max_dirty_mb | head -n 1`
lctl set_param -n osc.*.max_dirty_mb 0
for i in `seq 10` ; do
lctl set_param -n osc.*.max_dirty_mb $MAX_DIRTY_MB
rm -f $DIR/f63 || true
}
-run_test 63 "Verify oig_wait interruption does not crash ======="
+run_test 63a "Verify oig_wait interruption does not crash ======="
# bug 2248 - async write errors didn't return to application on sync
# bug 3677 - async write errors left page locked
"`$GETSTRIPE -v $DIR/d65/dd1 | grep "^count"`" ] || error "stripe info inherit failed"
}
run_test 65h "directory stripe info inherit ===================="
-
+
test_65i() { # bug6367
- $SETSTRIPE $MOUNT -s 65536 -c -1
+ $SETSTRIPE $MOUNT -s 65536 -c -1
}
run_test 65i "set non-default striping on root directory (bug 6367)="
run_test 69 "verify oa2dentry return -ENOENT doesn't LBUG ======"
test_71() {
- which dbench > /dev/null 2>&1 || { skip "dbench not installed, skip this test" && return 0; }
- DBENCH_LIB=${DBENCH_LIB:-/usr/lib/dbench}
- PATH=${DBENCH_LIB}:${PATH}
- cp `which dbench` $DIR
-
- TGT=$DIR/client.txt
- SRC=${SRC:-$DBENCH_LIB/client.txt}
- [ ! -e $TGT -a -e $SRC ] && echo "copying $SRC to $TGT" && cp $SRC $TGT
- SRC=$DBENCH_LIB/client_plain.txt
- [ ! -e $TGT -a -e $SRC ] && echo "copying $SRC to $TGT" && cp $SRC $TGT
- echo "copying necessary libs to $DIR"
- LIBS71=$(ldd $DIR/dbench|sed -e 's/\t*//' -e 's/.*=> //' -e 's/ .*//' -e 's/^\///')
- (cd / && tar chf - $LIBS71) | (cd $DIR && tar xvf -)
- [ $? = 0 ] || error "can't copy libs $LIBS71 to $DIR"
- echo "chroot $DIR /dbench -c client.txt 2"
- chroot $DIR /dbench -c client.txt 2
- RC=$?
-
- rm -rf $DIR/dbench $DIR/lib $DIR/lib64
-
- return $RC
+ sh rundbench -C -D $DIR 2 || error "dbench failed!"
}
run_test 71 "Running dbench on lustre (don't segment fault) ===="
test_72() { # bug 5695 - Test that on 2.6 remove_suid works properly
check_kernel_version 43 || return 0
[ "$RUNAS_ID" = "$UID" ] && skip "RUNAS_ID = UID = $UID -- skipping" && return
-
+
# Check that testing environment is properly set up. Skip if not
FAIL_ON_ERROR=false check_runas_id_ret $RUNAS_ID $RUNAS || {
skip "User $RUNAS_ID does not exist - skipping"
# bug 3462 - multiple simultaneous MDC requests
test_73() {
- mkdir $DIR/d73-1
+ mkdir $DIR/d73-1
mkdir $DIR/d73-2
multiop_bg_pause $DIR/d73-1/f73-1 O_c || return 1
pid1=$!
sleep 25
$CHECKSTAT -t file $DIR/d73-1/f73-1 || return 4
- $CHECKSTAT -t file $DIR/d73-1/f73-2 || return 5
- $CHECKSTAT -t file $DIR/d73-2/f73-3 || return 6
+ $CHECKSTAT -t file $DIR/d73-1/f73-2 || return 5
+ $CHECKSTAT -t file $DIR/d73-2/f73-3 || return 6
rm -rf $DIR/d73-*
}
test75_prep() {
[ $T75_PREP = "yes" ] && return
echo "using F75=$F75, F128k=$F128k, FHEAD=$FHEAD, FTAIL=$FTAIL"
-
+
dd if=/dev/urandom of=${F75}_128k bs=128k count=1 || error "dd failed"
log "finished dd"
chmod 777 ${F128k}
T75_PREP=yes
}
-
+
test_75a() {
# skipped temporarily: we do not have join file currently
# please remove this when ready - huanghua
return
test75_prep
-
+
cp -p ${F128k} ${FHEAD}
log "finished cp to $FHEAD"
cp -p ${F128k} ${FTAIL}
log "finished cp to $FTAIL"
cat ${F128k} ${F128k} > ${F75}_sim_sim
-
+
$JOIN ${FHEAD} ${FTAIL} || error "join ${FHEAD} ${FTAIL} error"
log "finished join $FHEAD to ${F75}_sim_sim"
cmp ${FHEAD} ${F75}_sim_sim || error "${FHEAD} ${F75}_sim_sim differ"
$CHECKSTAT -a ${FTAIL} || error "tail ${FTAIL} still exist after join"
}
run_test 75a "TEST join file ===================================="
-
+
test_75b() {
# skipped temporarily: we do not have join file currently
# please remove this when ready - huanghua
return
test75_prep
-
+
cp -p ${F128k} ${FTAIL}
cat ${F75}_sim_sim >> ${F75}_join_sim
cat ${F128k} >> ${F75}_join_sim
$CHECKSTAT -a ${FTAIL} || error "tail ${FTAIL} exist after join"
}
run_test 75b "TEST join file 2 =================================="
-
+
test_75c() {
# skipped temporarily: we do not have join file currently
# please remove this when ready - huanghua
return
test75_prep
-
+
cp -p ${F128k} ${FTAIL}
cat ${F128k} >> ${F75}_sim_join
cat ${F75}_join_sim >> ${F75}_sim_join
$CHECKSTAT -a ${FHEAD} || error "tail ${FHEAD} exist after join"
}
run_test 75c "TEST join file 3 =================================="
-
+
test_75d() {
# skipped temporarily: we do not have join file currently
# please remove this when ready - huanghua
return
test75_prep
-
+
cp -p ${F128k} ${FHEAD}
cp -p ${F128k} ${FHEAD}_tmp
cat ${F75}_sim_sim >> ${F75}_join_join
$CHECKSTAT -a ${FTAIL} || error "tail ${FTAIL} exist after join (2)"
}
run_test 75d "TEST join file 4 =================================="
-
+
test_75e() {
# skipped temporarily: we do not have join file currently
# please remove this when ready - huanghua
return
test75_prep
-
+
rm -rf ${FHEAD} || "delete join file error"
}
run_test 75e "TEST join file 5 (remove joined file) ============="
-
+
test_75f() {
# skipped temporarily: we do not have join file currently
# please remove this when ready - huanghua
return
test75_prep
-
+
cp -p ${F128k} ${F75}_join_10_compare
cp -p ${F128k} ${F75}_join_10
for ((i = 0; i < 10; i++)); do
error "files ${F75}_join_10 ${F75}_join_10_compare differ"
}
run_test 75f "TEST join file 6 (join 10 files) =================="
-
+
test_75g() {
# skipped temporarily: we do not have join file currently
# please remove this when ready - huanghua
return
[ ! -f ${F75}_join_10 ] && echo "${F75}_join_10 missing" && return
$LFS getstripe ${F75}_join_10
-
+
$OPENUNLINK ${F75}_join_10 ${F75}_join_10 || error "files unlink open"
-
+
ls -l $F75*
}
run_test 75g "TEST join file 7 (open unlink) ===================="
[ "$ORIG_CSUM_TYPE" ] || \
ORIG_CSUM_TYPE=`lctl get_param -n osc/*osc-[^mM]*/checksum_type |
sed 's/.*\[\(.*\)\].*/\1/g' | head -n1`
- lctl set_param -n osc.*osc-*.checksum_type $1
+ lctl set_param -n osc.*osc-[^mM]*.checksum_type $1
log "set checksum type to $1"
return 0
}
run_test 77b "checksum error on client write ===================="
test_77c() { # bug 10889
- [ ! -f $DIR/f77b ] && skip "requires 77b - skipping" && return
+ [ ! -f $DIR/f77b ] && skip "requires 77b - skipping" && return
set_checksums 1
for algo in $CKSUM_TYPES; do
cancel_lru_locks osc
run_test 77d "checksum error on OST direct write ==============="
test_77e() { # bug 10889
- [ ! -f $DIR/f77 ] && skip "requires 77d - skipping" && return
+ [ ! -f $DIR/f77 ] && skip "requires 77d - skipping" && return
#define OBD_FAIL_OSC_CHECKSUM_RECEIVE 0x408
lctl set_param fail_loc=0x80000408
set_checksums 1
test_77h() { # bug 10889
[ $(lctl get_param -n devices | grep -c obdfilter) -eq 0 ] && \
skip "remote OST" && return
- [ ! -f $DIR/f77 ] && skip "requires 77g - skipping" && return
+ [ ! -f $DIR/f77 ] && skip "requires 77g - skipping" && return
cancel_lru_locks osc
#define OBD_FAIL_OST_CHECKSUM_SEND 0x21b
lctl set_param fail_loc=0x8000021b
lctl set_param fail_loc=0x40c
remount_client $MOUNT
lctl set_param fail_loc=0
+ sleep 2 # wait async osc connect to finish
for VALUE in `lctl get_param osc.*osc-[^mM]*.checksum_type`; do
PARAM=`echo ${VALUE[0]} | cut -d "=" -f1`
algo=`lctl get_param -n $PARAM | sed 's/.*\[\(.*\)\].*/\1/g'`
ALLOWANCE=$((64 * $OSTCOUNT))
- if [ $DFTOTAL -lt $(($BKTOTAL - $ALLOWANCE)) ] ||
+ if [ $DFTOTAL -lt $(($BKTOTAL - $ALLOWANCE)) ] ||
[ $DFTOTAL -gt $(($BKTOTAL + $ALLOWANCE)) ] ; then
error "df total($DFTOTAL) mismatch OST total($BKTOTAL)"
fi
- if [ $DFFREE -lt $(($BKFREE - $ALLOWANCE)) ] ||
+ if [ $DFFREE -lt $(($BKFREE - $ALLOWANCE)) ] ||
[ $DFFREE -gt $(($BKFREE + $ALLOWANCE)) ] ; then
error "df free($DFFREE) mismatch OST free($BKFREE)"
fi
- if [ $DFAVAIL -lt $(($BKAVAIL - $ALLOWANCE)) ] ||
+ if [ $DFAVAIL -lt $(($BKAVAIL - $ALLOWANCE)) ] ||
[ $DFAVAIL -gt $(($BKAVAIL + $ALLOWANCE)) ] ; then
error "df avail($DFAVAIL) mismatch OST avail($BKAVAIL)"
fi
}
run_test 79 "df report consistency check ======================="
+test_80() { # bug 10718
+ dd if=/dev/zero of=$DIR/$tfile bs=1M count=1 seek=1M
+ sync; sleep 1; sync
+ BEFORE=`date +%s`
+ cancel_lru_locks OSC
+ AFTER=`date +%s`
+ DIFF=$((AFTER-BEFORE))
+ if [ $DIFF -gt 1 ] ; then
+ error "elapsed for 1M@1T = $DIFF"
+ fi
+ true
+}
+run_test 80 "Page eviction is equally fast at high offsets too ===="
+
# on the LLNL clusters, runas will still pick up root's $TMP settings,
# which will not be writable for the runas user, and then you get a CVS
# error message with a corrupt path string (CVS bug) and panic.
run_test 99a "cvs init ========================================="
test_99b() {
+ [ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && return
[ ! -d $DIR/d99cvsroot ] && test_99a
cd /etc/init.d
# some versions of cvs import exit(1) when asked to import links or
run_test 99b "cvs import ======================================="
test_99c() {
+ [ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && return
[ ! -d $DIR/d99cvsroot ] && test_99b
cd $DIR
mkdir -p $DIR/d99reposname
run_test 99c "cvs checkout ====================================="
test_99d() {
+ [ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && return
[ ! -d $DIR/d99cvsroot ] && test_99c
cd $DIR/d99reposname
$RUNAS touch foo99
run_test 99d "cvs add =========================================="
test_99e() {
+ [ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && return
[ ! -d $DIR/d99cvsroot ] && test_99c
cd $DIR/d99reposname
$RUNAS cvs update
run_test 99e "cvs update ======================================="
test_99f() {
+ [ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && return
[ ! -d $DIR/d99cvsroot ] && test_99d
cd $DIR/d99reposname
$RUNAS cvs commit -m 'nomsg' foo99
# randomly read 10000 of 64K chunks from file 3x 32MB in size
#
echo "nreads: $nreads file size: $((cache_limit * 3))MB"
- $RANDOM_READS -f $DIR/$tfile -s$((cache_limit * 3192 * 1024)) -b65536 -C -n$nreads -t 180
+ $READS -f $DIR/$tfile -s$((cache_limit * 3192 * 1024)) -b65536 -C -n$nreads -t 180
discard=0
- for s in `lctl get_param -n llite.*.read_ahead_stats | get_named_value 'read but discarded'`; do
- discard=$(($discard + $s))
+ for s in `lctl get_param -n llite.*.read_ahead_stats | \
+ get_named_value 'read but discarded' | cut -d" " -f1`; do
+ discard=$(($discard + $s))
done
cleanup_101
if [ $(($discard * 10)) -gt $nreads ] ;then
lctl get_param osc.*-osc*.rpc_stats
lctl get_param llite.*.read_ahead_stats
- error "too many ($discard) discarded pages"
+ error "too many ($discard) discarded pages"
fi
rm -f $DIR/$tfile || true
}
run_test 101 "check read-ahead for random reads ================"
+export SETUP_TEST101=no
+setup_test101() {
+ [ "$SETUP_TEST101" = "yes" ] && return
+ mkdir -p $DIR/$tdir
+ STRIPE_SIZE=1048576
+ STRIPE_COUNT=$OSTCOUNT
+ STRIPE_OFFSET=0
+
+ trap cleanup_test101 EXIT
+ # prepare the read-ahead file
+ $SETSTRIPE $DIR/$tfile -s $STRIPE_SIZE -i $STRIPE_OFFSET -c $OSTCOUNT
+
+ dd if=/dev/zero of=$DIR/$tfile bs=1024k count=100 2> /dev/null
+ SETUP_TEST101=yes
+}
+
+cleanup_test101() {
+ [ "$SETUP_TEST101" = "yes" ] || return
+ trap 0
+ rm -rf $DIR/$tdir
+ SETUP_TEST101=no
+}
+
+calc_total() {
+ awk 'BEGIN{total=0}; {total+=$1}; END{print total}'
+}
+
+ra_check_101() {
+ local READ_SIZE=$1
+ local STRIPE_SIZE=1048576
+ local RA_INC=1048576
+ local STRIDE_LENGTH=$((STRIPE_SIZE/READ_SIZE))
+ local FILE_LENGTH=$((64*100))
+ local discard_limit=$((((STRIDE_LENGTH - 1)*3/(STRIDE_LENGTH*OSTCOUNT))* \
+ (STRIDE_LENGTH*OSTCOUNT - STRIDE_LENGTH)))
+ DISCARD=`$LCTL get_param -n llite.*.read_ahead_stats | \
+ get_named_value 'read but discarded' | \
+ cut -d" " -f1 | calc_total`
+
+ if [ $DISCARD -gt $discard_limit ]; then
+ lctl get_param llite.*.read_ahead_stats
+ error "Too many ($DISCARD) discarded pages with size (${READ_SIZE})"
+ else
+ echo "Read-ahead success for size ${READ_SIZE}"
+ fi
+}
+
+test_101b() {
+ [ "$OSTCOUNT" -lt "2" ] && skip "skipping stride IO stride-ahead test" && return
+ local STRIPE_SIZE=1048576
+ local STRIDE_SIZE=$((STRIPE_SIZE*OSTCOUNT))
+ local FILE_LENGTH=$((STRIPE_SIZE*100))
+ local ITERATION=$((FILE_LENGTH/STRIDE_SIZE))
+ # prepare the read-ahead file
+ setup_test101
+ cancel_lru_locks osc
+ for BIDX in 2 4 8 16 32 64 128 256
+ do
+ local BSIZE=$((BIDX*4096))
+ local READ_COUNT=$((STRIPE_SIZE/BSIZE))
+ local STRIDE_LENGTH=$((STRIDE_SIZE/BSIZE))
+ local OFFSET=$((STRIPE_SIZE/BSIZE*(OSTCOUNT - 1)))
+ $LCTL set_param -n llite.*.read_ahead_stats 0
+ $READS -f $DIR/$tfile -l $STRIDE_LENGTH -o $OFFSET \
+ -s $FILE_LENGTH -b $STRIPE_SIZE -a $READ_COUNT -n $ITERATION
+ cancel_lru_locks osc
+ ra_check_101 $BSIZE
+ done
+ cleanup_test101
+ true
+}
+run_test 101b "check stride-io mode read-ahead ================="
+
export SETUP_TEST102=no
setup_test102() {
[ "$SETUP_TEST102" = "yes" ] && return
mkdir -p $DIR/$tdir
STRIPE_SIZE=65536
- STRIPE_COUNT=4
+ STRIPE_COUNT=4
STRIPE_OFFSET=2
trap cleanup_test102 EXIT
cd $DIR
$SETSTRIPE $tdir -s $STRIPE_SIZE -i $STRIPE_OFFSET -c $STRIPE_COUNT
- cd $DIR/$tdir
+ cd $DIR/$tdir
for num in 1 2 3 4
do
for count in 1 2 3 4
do
- for offset in 0 1 2 3
+ for offset in 0 1 2 3
do
local stripe_size=`expr $STRIPE_SIZE \* $num`
local file=file"$num-$offset-$count"
done
cd $DIR
- star -c f=$TMP/f102.tar $tdir
+ star -c f=$TMP/f102.tar $tdir
SETUP_TEST102=yes
}
setfattr -n trusted.name1 -v value1 $testfile || error
[ "`getfattr -n trusted.name1 $testfile 2> /dev/null | \
grep "trusted.name1"`" == "trusted.name1=\"value1\"" ] || error
-
+
setfattr -n user.author1 -v author1 $testfile || error
[ "`getfattr -n user.author1 $testfile 2> /dev/null | \
grep "user.author1"`" == "user.author1=\"author1\"" ] || error
[ `getfattr -d -m "^trusted" $testfile 2> /dev/null | \
grep "trusted.name" | wc -l` -eq 3 ] || error
-
+
setfattr -n user.author2 -v author2 $testfile || error
setfattr -n user.author3 -v author3 $testfile || error
[ `getfattr -d -m "^user" $testfile 2> /dev/null | \
do
for count in 1 2 3 4
do
- for offset in 0 1 2 3
+ for offset in 0 1 2 3
do
local size=`expr $STRIPE_SIZE \* $num`
local file=file"$num-$offset-$count"
local tmp_file=out
- $GETSTRIPE -v $file > $tmp_file
+ $GETSTRIPE -v $file > $tmp_file
get_stripe_info $tmp_file
if test $stripe_size -ne $size
then
do
for count in 1 2 3 4
do
- for offset in 0 1 2 3
+ for offset in 0 1 2 3
do
local size=`expr $STRIPE_SIZE \* $num`
local file=file"$num-$offset-$count"
test_102d() {
# b10930: star test for trusted.lov xattr
- star --xhelp 2>&1 | grep -q nolustre
+ star --xhelp 2>&1 | grep -q nolustre
if [ $? -ne 0 ]
then
skip "being skipped because a lustre-aware star is not installed." && return
test_102e() {
# b10930: star test for trusted.lov xattr
- star --xhelp 2>&1 | grep -q nolustre
+ star --xhelp 2>&1 | grep -q nolustre
[ $? -ne 0 ] && skip "lustre-aware star is not installed" && return
[ "$OSTCOUNT" -lt "4" ] && skip "skipping 4-stripe test" && return
setup_test102
test_102f() {
# b10930: star test for trusted.lov xattr
- star --xhelp 2>&1 | grep -q nolustre
+ star --xhelp 2>&1 | grep -q nolustre
[ $? -ne 0 ] && skip "lustre-aware star is not installed" && return
[ "$OSTCOUNT" -lt "4" ] && skip "skipping 4-stripe test" && return
setup_test102
test_102g() {
# b10930: star test for trusted.lov xattr
- star --xhelp 2>&1 | grep -q nolustre
+ star --xhelp 2>&1 | grep -q nolustre
[ $? -ne 0 ] && skip "lustre-aware star is not installed" && return
[ "$OSTCOUNT" -lt "4" ] && skip "skipping 4-stripe test" && return
setup_test102
touch $DIR/$tfile
if [ -n "`mount | grep \"$DIR.*flock\" | grep -v noflock`" ];
then
- flocks_test on -f $DIR/$tfile || error "fail flock on"
+ flocks_test 1 on -f $DIR/$tfile || error "fail flock on"
else
- flocks_test off -f $DIR/$tfile || error "fail flock off"
+ flocks_test 1 off -f $DIR/$tfile || error "fail flock off"
fi
}
run_test 105a "flock when mounted without -o flock test ========"
touch $DIR/$tfile
if [ -n "`mount | grep \"$DIR.*flock\" | grep -v noflock`" ];
then
- flocks_test on -c $DIR/$tfile || error "fail flock on"
+ flocks_test 1 on -c $DIR/$tfile || error "fail flock on"
else
- flocks_test off -c $DIR/$tfile || error "fail flock off"
+ flocks_test 1 off -c $DIR/$tfile || error "fail flock off"
fi
}
run_test 105b "fcntl when mounted without -o flock test ========"
touch $DIR/$tfile
if [ -n "`mount | grep \"$DIR.*flock\" | grep -v noflock`" ];
then
- flocks_test on -l $DIR/$tfile || error "fail flock on"
+ flocks_test 1 on -l $DIR/$tfile || error "fail flock on"
else
- flocks_test off -l $DIR/$tfile || error "fail flock off"
+ flocks_test 1 off -l $DIR/$tfile || error "fail flock off"
fi
}
run_test 105c "lockf when mounted without -o flock test ========"
+test_105d() { # bug 15924
+ mkdir -p $DIR/$tdir
+ [ -z "`mount | grep \"$DIR.*flock\" | grep -v noflock`" ] && \
+ skip "mount w/o flock enabled" && return
+ #define OBD_FAIL_LDLM_CP_CB_WAIT 0x315
+ $LCTL set_param fail_loc=0x80000315
+ flocks_test 2 $DIR/$tdir
+}
+run_test 105d "flock race (should not freeze) ========"
+
test_106() { #bug 10921
+ mkdir -p $DIR/$tdir
$DIR/$tdir && error "exec $DIR/$tdir succeeded"
chmod 777 $DIR/$tdir || error "chmod $DIR/$tdir failed"
}
test_107() {
CDIR=`pwd`
cd $DIR
+
+ local file=core
+ rm -f $file
+
+ local save_pattern=$(sysctl -n kernel.core_pattern)
+ local save_uses_pid=$(sysctl -n kernel.core_uses_pid)
+ sysctl -w kernel.core_pattern=$file
+ sysctl -w kernel.core_uses_pid=0
+
ulimit -c unlimited
sleep 60 &
SLEEPPID=$!
- file=`sysctl -n kernel.core_pattern`
- core_pid=`sysctl -n kernel.core_uses_pid`
- [ $core_pid -eq 1 ] && file=$file.$SLEEPPID
- rm -f $file
sleep 1
kill -s 11 $SLEEPPID
error "Fail to create core file $file"
fi
rm -f $file
+ sysctl -w kernel.core_pattern=$save_pattern
+ sysctl -w kernel.core_uses_pid=$save_uses_pid
cd $CDIR
}
run_test 107 "Coredump on SIG"
# don't return an error
[ $OSTIO_post -eq $OSTIO_pre ] && echo \
- "FAIL: No addition ll_ost_io threads were created ($OSTIO_pre)" &&\
+ "WARNING: No new ll_ost_io threads were created ($OSTIO_pre)" &&\
echo "This may be fine, depending on what ran before this test" &&\
echo "and how fast this system is." && return
MINV=${AVAIL[i]}; MINI=$i
fi
done
- echo Min free space: OST $MINI: $MINV
- echo Max free space: OST $MAXI: $MAXV
+ echo Min free space: OST $MINI: $MINV
+ echo Max free space: OST $MAXI: $MAXV
}
test_116() {
echo "ok"
else
echo "failed - QOS mode won't be used"
- error "QOS imbalance criteria not met"
+ error_ignore "QOS imbalance criteria not met"
return
fi
free_min_max
DIFF2=$(($MAXV - $MINV))
echo "free space delta: orig $DIFF final $DIFF2"
- [ $DIFF2 -gt $DIFF ] && echo "delta got worse!"
+ [ $DIFF2 -gt $DIFF ] && echo "delta got worse!"
DIFF=$(($MINV1 - ${AVAIL[$MINI1]}))
echo "Wrote $DIFF to smaller OST $MINI1"
DIFF2=$(($MAXV1 - ${AVAIL[$MAXI1]}))
echo "Wrote $DIFF2 to larger OST $MAXI1"
[ $DIFF -gt 0 ] && echo "Wrote $(($DIFF2 * 100 / $DIFF - 100))% more data to larger OST $MAXI1"
- # Figure out which files were written where
+ # Figure out which files were written where
UUID=$(lctl get_param -n lov.${FSNAME}-clilov-*.target_obd |
awk '/'$MINI1': / {print $2; exit}')
echo $UUID
MAXC=$($GETSTRIPE --obd $UUID $DIR/$tdir | wc -l)
echo "$MAXC files created on larger OST $MAXI1"
[ $MINC -gt 0 ] && echo "Wrote $(($MAXC * 100 / $MINC - 100))% more files to larger OST $MAXI1"
- [ $MAXC -gt $MINC ] || error "stripe QOS didn't balance free space"
+ [ $MAXC -gt $MINC ] || error_ignore "stripe QOS didn't balance free space"
}
run_test 116 "stripe QOS: free space balance ==================="
fi
lctl set_param fail_loc=0x0
-
+
LOCKED=$(lctl get_param -n llite.*.dump_page_cache | grep -c locked)
DIRTY=$(lctl get_param -n llite.*.dump_page_cache | grep -c dirty)
WRITEBACK=$(lctl get_param -n llite.*.dump_page_cache |
}
run_test 119c "Testing for direct read hitting hole"
+test_119d() # bug 15950
+{
+ MAX_RPCS_IN_FLIGHT=`$LCTL get_param -n osc.*OST0000-osc-[^mM]*.max_rpcs_in_flight`
+ $LCTL set_param -n osc.*OST0000-osc-[^mM]*.max_rpcs_in_flight 1
+ BSIZE=1048576
+ $SETSTRIPE $DIR/$tfile -i 0 -c 1 || error "setstripe failed"
+ $DIRECTIO write $DIR/$tfile 0 1 $BSIZE || error "first directio failed"
+ #define OBD_FAIL_OSC_DIO_PAUSE 0x40d
+ lctl set_param fail_loc=0x40d
+ $DIRECTIO write $DIR/$tfile 1 4 $BSIZE &
+ pid_dio=$!
+ sleep 1
+ cat $DIR/$tfile > /dev/null &
+ lctl set_param fail_loc=0
+ pid_reads=$!
+ wait $pid_dio
+ log "the DIO writes have completed, now wait for the reads (should not block very long)"
+ sleep 2
+ [ -n "`ps h -p $pid_reads -o comm`" ] && \
+ error "the read rpcs have not completed in 2s"
+ rm -f $DIR/$tfile
+ $LCTL set_param -n osc.*OST0000-osc-[^mM]*.max_rpcs_in_flight $MAX_RPCS_IN_FLIGHT
+}
+run_test 119d "The DIO path should try to send a new rpc once one is completed"
+
test_120a() {
+ mkdir -p $DIR/$tdir
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
lru_resize_disable mdc
run_test 120a "Early Lock Cancel: mkdir test"
test_120b() {
+ mkdir -p $DIR/$tdir
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
lru_resize_disable mdc
run_test 120b "Early Lock Cancel: create test"
test_120c() {
+ mkdir -p $DIR/$tdir
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
lru_resize_disable mdc
run_test 120c "Early Lock Cancel: link test"
test_120d() {
+ mkdir -p $DIR/$tdir
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
lru_resize_disable mdc
run_test 120d "Early Lock Cancel: setattr test"
test_120e() {
+ mkdir -p $DIR/$tdir
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
lru_resize_disable mdc
test_120f() {
[ -z "`lctl get_param -n mdc.*.connect_flags | grep early_lock_cancel`" ] && \
skip "no early lock cancel on server" && return 0
+ mkdir -p $DIR/$tdir
lru_resize_disable mdc
lru_resize_disable osc
mkdir -p $DIR/$tdir/d1 $DIR/$tdir/d2
run_test 121 "read cancel race ========="
test_123a() { # was test 123, statahead(bug 11401)
+ SLOWOK=0
if [ -z "$(grep "processor.*: 1" /proc/cpuinfo)" ]; then
log "testing on UP system. Performance may be not as good as expected."
+ SLOWOK=1
fi
remount_client $MOUNT
lctl get_param -n llite.*.statahead_stats
# wait for commitment of removal
sleep 2
- [ $error -ne 0 ] && error "statahead is slow!"
+ [ $error -ne 0 -a $SLOWOK -eq 0 ] && error "statahead is slow!"
return 0
}
run_test 123a "verify statahead work"
# use touch to produce $NR new locks
log "create $NR files at $DIR/$tdir"
- createmany -o $DIR/$tdir/f $NR ||
- error "failed to create $NR files in $DIR/$tdir"
-
+ createmany -o $DIR/$tdir/f $NR ||
+ error "failed to create $NR files in $DIR/$tdir"
+
cancel_lru_locks mdc
ls -l $DIR/$tdir > /dev/null
[ -z "`lctl get_param -n mdc.*.connect_flags | grep lru_resize`" ] && \
skip "no lru resize on server" && return 0
- # even for cmd no matter what metadata namespace to use for getting
+ # even for cmd no matter what metadata namespace to use for getting
# the limit, we use appropriate.
LIMIT=`lctl get_param -n ldlm.namespaces.*mdc*.pool.limit`
NR=$LIMIT
fi
lru_resize_disable mdc
- mkdir -p $DIR/$tdir/disable_lru_resize ||
+ mkdir -p $DIR/$tdir/disable_lru_resize ||
error "failed to create $DIR/$tdir/disable_lru_resize"
createmany -o $DIR/$tdir/disable_lru_resize/f $NR
unlinkmany $DIR/$tdir/disable_lru_resize/f $NR
lru_resize_enable mdc
- mkdir -p $DIR/$tdir/enable_lru_resize ||
+ mkdir -p $DIR/$tdir/enable_lru_resize ||
error "failed to create $DIR/$tdir/enable_lru_resize"
createmany -o $DIR/$tdir/enable_lru_resize/f $NR
echo "got $COUNT $NAME"
case $NAME in
- ost_read|ost_write)
+ read_bytes|write_bytes)
[ $MIN -lt 4096 ] && error "min is too small: $MIN"
[ $MIN -gt $FSIZE ] && error "min is too big: $MIN"
[ $MAX -lt 4096 ] && error "max is too small: $MAX"
[ $MAX -gt $FSIZE ] && error "max is too big: $MAX"
[ $SUM -ne $FSIZE ] && error "sum is wrong: $SUM"
- [ $SUMSQ -lt $(((FSIZE /4096) * (4096 * 4096))) ] &&
+ [ $SUMSQ -lt $(((FSIZE /4096) * (4096 * 4096))) ] &&
error "sumsquare is too small: $SUMSQ"
- [ $SUMSQ -gt $((FSIZE * FSIZE)) ] &&
+ [ $SUMSQ -gt $((FSIZE * FSIZE)) ] &&
error "sumsquare is too big: $SUMSQ"
;;
*) ;;
done < $DIR/${tfile}.tmp
#check that we actually got some stats
- [ "$ost_read" ] || error "no read done"
- [ "$ost_write" ] || error "no write done"
+ [ "$read_bytes" ] || error "no read done"
+ [ "$write_bytes" ] || error "no write done"
}
run_test 127 "verify the client stats are sane"
run_test 128 "interactive lfs for 2 consecutive find's"
test_129() {
- [ "$FSTYPE" = "ldiskfs" ] || return 0
- mkdir $DIR/$tdir
-
- EFBIG=27
- ldiskfs_prefix=/proc/fs/ldiskfs
- proc_file=max_dir_size
- max_bytes=16385
-
- echo $max_bytes >$ldiskfs_prefix/$proc_file
-
- I=0
- J=0
- while [ $I -lt $max_bytes ]; do
- touch $DIR/$tdir/$J
- J=$((J+1))
- I=$(stat -c%s "$DIR/$tdir")
+ [ "$FSTYPE" != "ldiskfs" ] && skip "not needed for FSTYPE=$FSTYPE" && return 0
+
+ DEV=$(basename $(do_facet mds lctl get_param -n osd.*MDT*.mntdev))
+ [ -z "$DEV" ] && error "can't access mds mntdev"
+ EFBIG=27
+ LDPROC=/proc/fs/ldiskfs/$DEV/max_dir_size
+ MAX=16384
+
+ do_facet mds "echo $MAX > $LDPROC"
+
+ mkdir -p $DIR/$tdir
+
+ I=0
+ J=0
+ while [ ! $I -gt $MAX ]; do
+ multiop $DIR/$tdir/$J Oc
+ rc=$?
+ if [ $rc -eq $EFBIG ]; then
+ do_facet mds "echo 0 >$LDPROC"
+ echo "return code $rc received as expected"
+ return 0
+ elif [ $rc -ne 0 ]; then
+ do_facet mds "echo 0 >$LDPROC"
+ error_exit "return code $rc received instead of expected $EFBIG"
+ fi
+ J=$((J+1))
+ I=$(stat -c%s "$DIR/$tdir")
+ done
+
+ error "exceeded dir size limit: $I bytes"
+ do_facet mds "echo 0 >$LDPROC"
+}
+run_test 129 "test directory size limit ========================"
+
+
+test_130a() {
+ filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
+ [ -n "$filefrag_op" ] && skip "filefrag does not support FIEMAP" && return
+
+ local fm_file=$DIR/$tfile
+ lfs setstripe -s 65536 -c 1 $fm_file || error "setstripe failed on $fm_file"
+ dd if=/dev/zero of=$fm_file bs=65536 count=1 || error "dd failed for $fm_file"
+
+ filefrag -ves $fm_file || error "filefrag $fm_file failed"
+ filefrag_op=`filefrag -ve $fm_file | grep -A 100 "ext:" | grep -v "ext:" | grep -v "found"`
+
+ lun=`$GETSTRIPE $fm_file | grep -A 10 obdidx | awk '{print $1}' | grep -v "obdidx"`
+
+ start_blk=`echo $filefrag_op | cut -d: -f2 | cut -d. -f1`
+ IFS=$'\n'
+ tot_len=0
+ for line in $filefrag_op
+ do
+ frag_lun=`echo $line | cut -d: -f5`
+ ext_len=`echo $line | cut -d: -f4`
+ if (( $frag_lun != $lun )); then
+ error "FIEMAP on 1-stripe file($fm_file) failed"
+ return
+ fi
+ (( tot_len += ext_len ))
done
- # One more file and we should be over the limit
- multiop $DIR/$tdir/$J Oc
- rc=$?
- if [ $rc -eq 0 ]; then
- rm -rf $DIR/$tdir
- error "exceeded dir size limit: $I bytes"
- elif [ $rc -ne $EFBIG ]; then
- rm -rf $DIR/$tdir
- error "return code $rc received instead of expected $EFBIG"
- else
- echo "return code $rc received as expected"
+ if (( lun != frag_lun || start_blk != 0 || tot_len != 64 )); then
+ error "FIEMAP on 1-stripe file($fm_file) failed;"
+ return
fi
+ echo "FIEMAP on single striped file succeeded"
+}
+run_test 130a "FIEMAP (1-stripe file)"
- echo 0 >$ldiskfs_prefix/$proc_file
- rm -rf $DIR/$tdir
+test_130b() {
+ [ "$OSTCOUNT" -lt "2" ] && skip "skipping FIEMAP on 2-stripe file test" && return
+
+ filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
+ [ -n "$filefrag_op" ] && skip "filefrag does not support FIEMAP" && return
+
+ local fm_file=$DIR/$tfile
+ lfs setstripe -s 65536 -c 2 $fm_file || error "setstripe failed on $fm_file"
+ dd if=/dev/zero of=$fm_file bs=1M count=2 || error "dd failed on $fm_file"
+
+ filefrag -ves $fm_file || error "filefrag $fm_file failed"
+ filefrag_op=`filefrag -ve $fm_file | grep -A 100 "ext:" | grep -v "ext:" | grep -v "found"`
+
+ last_lun=`echo $filefrag_op | cut -d: -f5`
+
+ IFS=$'\n'
+ tot_len=0
+ num_luns=1
+ for line in $filefrag_op
+ do
+ frag_lun=`echo $line | cut -d: -f5`
+ ext_len=`echo $line | cut -d: -f4`
+ if (( $frag_lun != $last_lun )); then
+ if (( tot_len != 1024 )); then
+ error "FIEMAP on $fm_file failed; returned len $tot_len for OST $last_lun instead of 256"
+ return
+ else
+ (( num_luns += 1 ))
+ tot_len=0
+ fi
+ fi
+ (( tot_len += ext_len ))
+ last_lun=$frag_lun
+ done
+ if (( num_luns != 2 || tot_len != 1024 )); then
+ error "FIEMAP on $fm_file failed; returned wrong number of luns or wrong len for OST $last_lun"
+ return
+ fi
+
+ echo "FIEMAP on 2-stripe file succeeded"
}
-run_test 129 "test directory size limit ========================"
+run_test 130b "FIEMAP (2-stripe file)"
+
+test_130c() {
+ [ "$OSTCOUNT" -lt "2" ] && skip "skipping FIEMAP on 2-stripe file with hole test" && return
+
+ filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
+ [ -n "$filefrag_op" ] && skip "filefrag does not support FIEMAP" && return
+
+ local fm_file=$DIR/$tfile
+ lfs setstripe -s 65536 -c 2 $fm_file || error "setstripe failed on $fm_file"
+ dd if=/dev/zero of=$fm_file seek=1 bs=1M count=1 || error "dd failed on $fm_file"
+
+ filefrag -ves $fm_file || error "filefrag $fm_file failed"
+ filefrag_op=`filefrag -ve $fm_file | grep -A 100 "ext:" | grep -v "ext:" | grep -v "found"`
+
+ last_lun=`echo $filefrag_op | cut -d: -f5`
+
+ IFS=$'\n'
+ tot_len=0
+ num_luns=1
+ for line in $filefrag_op
+ do
+ frag_lun=`echo $line | cut -d: -f5`
+ ext_len=`echo $line | cut -d: -f4`
+ if (( $frag_lun != $last_lun )); then
+ logical=`echo $line | cut -d: -f2 | cut -d. -f1`
+ if (( logical != 512 )); then
+ error "FIEMAP on $fm_file failed; returned logical start for lun $logical instead of 512"
+ return
+ fi
+ if (( tot_len != 512 )); then
+ error "FIEMAP on $fm_file failed; returned len $tot_len for OST $last_lun instead of 1024"
+ return
+ else
+ (( num_luns += 1 ))
+ tot_len=0
+ fi
+ fi
+ (( tot_len += ext_len ))
+ last_lun=$frag_lun
+ done
+ if (( num_luns != 2 || tot_len != 512 )); then
+ error "FIEMAP on $fm_file failed; returned wrong number of luns or wrong len for OST $last_lun"
+ return
+ fi
+
+ echo "FIEMAP on 2-stripe file with hole succeeded"
+}
+run_test 130c "FIEMAP (2-stripe file with hole)"
+
+test_130d() {
+ [ "$OSTCOUNT" -lt "3" ] && skip "skipping FIEMAP on N-stripe file test" && return
+
+ filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
+ [ -n "$filefrag_op" ] && skip "filefrag does not support FIEMAP" && return
+
+ local fm_file=$DIR/$tfile
+ lfs setstripe -s 65536 -c $OSTCOUNT $fm_file || error "setstripe failed on $fm_file"
+ dd if=/dev/zero of=$fm_file bs=1M count=$OSTCOUNT || error "dd failed on $fm_file"
+
+ filefrag -ves $fm_file || error "filefrag $fm_file failed"
+ filefrag_op=`filefrag -ve $fm_file | grep -A 100 "ext:" | grep -v "ext:" | grep -v "found"`
+
+ last_lun=`echo $filefrag_op | cut -d: -f5`
+
+ IFS=$'\n'
+ tot_len=0
+ num_luns=1
+ for line in $filefrag_op
+ do
+ frag_lun=`echo $line | cut -d: -f5`
+ ext_len=`echo $line | cut -d: -f4`
+ if (( $frag_lun != $last_lun )); then
+ if (( tot_len != 1024 )); then
+ error "FIEMAP on $fm_file failed; returned len $tot_len for OST $last_lun instead of 1024"
+ return
+ else
+ (( num_luns += 1 ))
+ tot_len=0
+ fi
+ fi
+ (( tot_len += ext_len ))
+ last_lun=$frag_lun
+ done
+ if (( num_luns != OSTCOUNT || tot_len != 1024 )); then
+ error "FIEMAP on $fm_file failed; returned wrong number of luns or wrong len for OST $last_lun"
+ return
+ fi
+
+ echo "FIEMAP on N-stripe file succeeded"
+}
+run_test 130d "FIEMAP (N-stripe file)"
+
+test_130e() {
+ [ "$OSTCOUNT" -lt "2" ] && skip "skipping continuation FIEMAP test" && return
+
+ filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
+ [ -n "$filefrag_op" ] && skip "filefrag does not support FIEMAP" && return
+
+ local fm_file=$DIR/$tfile
+ lfs setstripe -s 65536 -c 2 $fm_file || error "setstripe failed on $fm_file"
+ NUM_BLKS=512
+ EXPECTED_LEN=$(( (NUM_BLKS / 2) * 4 ))
+ for ((i = 0; i < $NUM_BLKS; i++))
+ do
+ dd if=/dev/zero of=$fm_file count=1 bs=4096 seek=$((2*$i)) conv=notrunc > /dev/null 2>&1
+ done
+
+ filefrag -ves $fm_file || error "filefrag $fm_file failed"
+ filefrag_op=`filefrag -ve $fm_file | grep -A 750 "ext:" | grep -v "ext:" | grep -v "found"`
+
+ last_lun=`echo $filefrag_op | cut -d: -f5`
+
+ IFS=$'\n'
+ tot_len=0
+ num_luns=1
+ for line in $filefrag_op
+ do
+ frag_lun=`echo $line | cut -d: -f5`
+ ext_len=`echo $line | cut -d: -f4`
+ if (( $frag_lun != $last_lun )); then
+ if (( tot_len != $EXPECTED_LEN )); then
+ error "FIEMAP on $fm_file failed; returned len $tot_len for OST $last_lun instead of $EXPECTED_LEN"
+ return
+ else
+ (( num_luns += 1 ))
+ tot_len=0
+ fi
+ fi
+ (( tot_len += ext_len ))
+ last_lun=$frag_lun
+ done
+ if (( num_luns != 2 || tot_len != $EXPECTED_LEN )); then
+ echo "$num_luns $tot_len"
+ error "FIEMAP on $fm_file failed; returned wrong number of luns or wrong len for OST $last_lun"
+ return
+ fi
+
+ echo "FIEMAP with continuation calls succeeded"
+}
+run_test 130e "FIEMAP (test continuation FIEMAP calls)"
+
+POOL=${POOL:-cea1}
+TGT_COUNT=$OSTCOUNT
+TGTPOOL_FIRST=1
+TGTPOOL_MAX=$(($TGT_COUNT - 1))
+TGTPOOL_STEP=2
+TGTPOOL_LIST=`seq $TGTPOOL_FIRST $TGTPOOL_STEP $TGTPOOL_MAX`
+POOL_ROOT=${POOL_ROOT:-$DIR/d200.pools}
+POOL_DIR=$POOL_ROOT/dir_tst
+POOL_FILE=$POOL_ROOT/file_tst
+
+check_file_in_pool()
+{
+ file=$1
+ res=$($GETSTRIPE $file | grep 0x | cut -f2)
+ for i in $res
+ do
+ found=$(echo :$TGTPOOL_LIST: | tr " " ":" | grep :$i:)
+ if [[ "$found" == "" ]]
+ then
+ echo "pool list: $TGTPOOL_LIST"
+ echo "striping: $res"
+ error "$file not allocated in $POOL"
+ return 1
+ fi
+ done
+ return 0
+}
+
+test_200() {
+ do_facet mgs $LCTL pool_new $FSNAME.$POOL
+ do_facet mgs $LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL
+ [ $? == 0 ] || error "Pool creation of $POOL failed"
+}
+run_test 200 "Create new pool =========================================="
+
+test_201() {
+ TGT=$(seq -f $FSNAME-OST%04g_UUID $TGTPOOL_FIRST $TGTPOOL_STEP \
+ $TGTPOOL_MAX | tr '\n' ' ')
+ do_facet mgs $LCTL pool_add $FSNAME.$POOL \
+ $FSNAME-OST[$TGTPOOL_FIRST-$TGTPOOL_MAX/$TGTPOOL_STEP]_UUID
+ res=$(do_facet mgs $LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL | sort \
+ | tr '\n' ' ')
+ [ "$res" = "$TGT" ] || error "Pool content ($res) do not match requested ($TGT)"
+}
+run_test 201 "Add targets to a pool ===================================="
+
+test_202a() {
+ mkdir -p $POOL_DIR
+ $SETSTRIPE -c 2 -p $POOL $POOL_DIR
+ [ $? = 0 ] || error "Cannot set pool $POOL to $POOL_DIR"
+}
+run_test 202a "Set pool on a directory ================================="
+
+test_202b() {
+ res=$($GETSTRIPE $POOL_DIR | grep pool: | cut -f8 -d " ")
+ [ "$res" = $POOL ] || error "Pool on $POOL_DIR is not $POOL"
+}
+run_test 202b "Check pool on a directory ==============================="
+
+test_202c() {
+ failed=0
+ for i in $(seq -w 1 $(($TGT_COUNT * 3)))
+ do
+ file=$POOL_DIR/file-$i
+ touch $file
+ check_file_in_pool $file
+ if [[ $? != 0 ]]
+ then
+ failed=$(($failed + 1))
+ fi
+ done
+ [ "$failed" = 0 ] || error "$failed files not allocated in $POOL"
+}
+run_test 202c "Check files allocation from directory pool =============="
+
+test_203() {
+ mkdir -p $POOL_FILE
+ failed=0
+ for i in $(seq -w 1 $(($TGT_COUNT * 3)))
+ do
+ file=$POOL_FILE/spoo-$i
+ $SETSTRIPE -p $POOL $file
+ check_file_in_pool $file
+ if [[ $? != 0 ]]
+ then
+ failed=$(($failed + 1))
+ fi
+ done
+ [ "$failed" = 0 ] || error "$failed files not allocated in $POOL"
+}
+run_test 203 "Create files in a pool ==================================="
+
+test_210a() {
+ TGT=$(do_facet mgs $LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL | head -1)
+ do_facet mgs $LCTL pool_remove $FSNAME.$POOL $TGT
+ res=$(do_facet mgs $LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL | grep $TGT)
+ [ "$res" = "" ] || error "$TGT not removed from $FSNAME.$POOL"
+}
+run_test 210a "Remove a target from a pool ============================="
+
+test_210b() {
+ for TGT in $(do_facet mgs $LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL)
+ do
+ do_facet mgs $LCTL pool_remove $FSNAME.$POOL $TGT
+ done
+ res=$(do_facet mgs $LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL)
+ [ "$res" = "" ] || error "Pool $FSNAME.$POOL cannot be drained"
+}
+run_test 210b "Remove all targets from a pool =========================="
+
+test_211() {
+ do_facet mgs $LCTL pool_destroy $FSNAME.$POOL
+ res=$(do_facet mgs "$LCTL get_param -n lov.$FSNAME-MDT0000-mdtlov.pools.$POOL 2>/dev/null")
+ [ "$res" = "" ] || error "Pool $FSNAME.$POOL is not destroyed"
+}
+run_test 211 "Remove a pool ============================================"
TMPDIR=$OLDTMPDIR
TMP=$OLDTMP