test_127a() { # bug 15521
[ $PARALLEL == "yes" ] && skip "skip parallel run"
+ local name count samp unit min max sum sumsq
$LFS setstripe -i 0 -c 1 $DIR/$tfile || error "setstripe failed"
+ echo "stats before reset"
+ $LCTL get_param osc.*.stats
$LCTL set_param osc.*.stats=0
- FSIZE=$((2048 * 1024))
- dd if=/dev/zero of=$DIR/$tfile bs=$FSIZE count=1
+ local fsize=$((2048 * 1024))
+
+ dd if=/dev/zero of=$DIR/$tfile bs=$fsize count=1
cancel_lru_locks osc
- dd if=$DIR/$tfile of=/dev/null bs=$FSIZE
-
- $LCTL get_param osc.*0000-osc-*.stats | grep samples > $DIR/${tfile}.tmp
- while read NAME COUNT SAMP UNIT MIN MAX SUM SUMSQ; do
- echo "got $COUNT $NAME"
- [ ! $MIN ] && error "Missing min value for $NAME proc entry"
- eval $NAME=$COUNT || error "Wrong proc format"
-
- case $NAME in
- read_bytes|write_bytes)
- [ $MIN -lt 4096 ] && error "min is too small: $MIN"
- [ $MIN -gt $FSIZE ] && error "min is too big: $MIN"
- [ $MAX -lt 4096 ] && error "max is too small: $MAX"
- [ $MAX -gt $FSIZE ] && error "max is too big: $MAX"
- [ $SUM -ne $FSIZE ] && error "sum is wrong: $SUM"
- [ $SUMSQ -lt $(((FSIZE /4096) * (4096 * 4096))) ] &&
- error "sumsquare is too small: $SUMSQ"
- [ $SUMSQ -gt $((FSIZE * FSIZE)) ] &&
- error "sumsquare is too big: $SUMSQ"
- ;;
- *) ;;
- esac
- done < $DIR/${tfile}.tmp
-
- #check that we actually got some stats
- [ "$read_bytes" ] || error "Missing read_bytes stats"
- [ "$write_bytes" ] || error "Missing write_bytes stats"
- [ "$read_bytes" != 0 ] || error "no read done"
- [ "$write_bytes" != 0 ] || error "no write done"
+ dd if=$DIR/$tfile of=/dev/null bs=$fsize
+
+ $LCTL get_param osc.*0000-osc-*.stats | grep samples > $DIR/$tfile.tmp
+ stack_trap "rm -f $TMP/$tfile.tmp"
+ while read name count samp unit min max sum sumsq; do
+ echo "got name=$name count=$count unit=$unit min=$min max=$max"
+ [ ! $min ] && error "Missing min value for $name proc entry"
+ eval $name=$count || error "Wrong proc format"
+
+ case $name in
+ read_bytes|write_bytes)
+ [[ "$unit" =~ "bytes" ]] ||
+ error "unit is not 'bytes': $unit"
+ (( $min >= 4096 )) || error "min is too small: $min"
+ (( $min <= $fsize )) || error "min is too big: $min"
+ (( $max >= 4096 )) || error "max is too small: $max"
+ (( $max <= $fsize )) || error "max is too big: $max"
+ (( $sum == $fsize )) || error "sum is wrong: $sum"
+ (( $sumsq >= ($fsize / 4096) * (4096 * 4096) )) ||
+ error "sumsquare is too small: $sumsq"
+ (( $sumsq <= $fsize * $fsize )) ||
+ error "sumsquare is too big: $sumsq"
+ ;;
+ ost_read|ost_write)
+ [[ "$unit" =~ "usec" ]] ||
+ error "unit is not 'usec': $unit"
+ ;;
+ *) ;;
+ esac
+ done < $DIR/$tfile.tmp
+
+ #check that we actually got some stats
+ [ "$read_bytes" ] || error "Missing read_bytes stats"
+ [ "$write_bytes" ] || error "Missing write_bytes stats"
+ [ "$read_bytes" != 0 ] || error "no read done"
+ [ "$write_bytes" != 0 ] || error "no write done"
}
run_test 127a "verify the client stats are sane"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
local name count samp unit min max sum sumsq
+ echo "stats before reset"
+ $LCTL get_param llite.*.stats
$LCTL set_param llite.*.stats=0
# perform 2 reads and writes so MAX is different from SUM.
dd if=$DIR/$tfile of=/dev/null bs=$PAGE_SIZE count=1
$LCTL get_param llite.*.stats | grep samples > $TMP/$tfile.tmp
+ stack_trap "rm -f $TMP/$tfile.tmp"
while read name count samp unit min max sum sumsq; do
- echo "got $count $name"
+ echo "got name=$name count=$count unit=$unit min=$min max=$max"
eval $name=$count || error "Wrong proc format"
case $name in
- read_bytes)
- [ $count -ne 2 ] && error "count is not 2: $count"
- [ $min -ne $PAGE_SIZE ] &&
+ read_bytes|write_bytes)
+ [[ "$unit" =~ "bytes" ]] ||
+ error "unit is not 'bytes': $unit"
+ (( $count == 2 )) || error "count is not 2: $count"
+ (( $min == $PAGE_SIZE )) ||
error "min is not $PAGE_SIZE: $min"
- [ $max -ne $PAGE_SIZE ] &&
- error "max is incorrect: $max"
- [ $sum -ne $((PAGE_SIZE * 2)) ] &&
- error "sum is wrong: $sum"
+ (( $max == $PAGE_SIZE )) ||
+ error "max is not $PAGE_SIZE: $max"
+ (( $sum == $PAGE_SIZE * 2 )) ||
+ error "sum is not $((PAGE_SIZE * 2)): $sum"
;;
- write_bytes)
- [ $count -ne 2 ] && error "count is not 2: $count"
- [ $min -ne $PAGE_SIZE ] &&
- error "min is not $PAGE_SIZE: $min"
- [ $max -ne $PAGE_SIZE ] &&
- error "max is incorrect: $max"
- [ $sum -ne $((PAGE_SIZE * 2)) ] &&
- error "sum is wrong: $sum"
+ read|write)
+ [[ "$unit" =~ "usec" ]] ||
+ error "unit is not 'usec': $unit"
;;
- *) ;;
+ *) ;;
esac
done < $TMP/$tfile.tmp
[ "$write_bytes" ] || error "Missing write_bytes stats"
[ "$read_bytes" != 0 ] || error "no read done"
[ "$write_bytes" != 0 ] || error "no write done"
-
- rm -f $TMP/${tfile}.tmp
}
run_test 127b "verify the llite client stats are sane"
lod.lustre-MDT0000-mdtlov.mdt_qos_prio_free | head -n1)
lod_qos_prio_free=${lod_qos_prio_free%%%}
lod_qos_threshold_rr=$(do_facet mds1 $LCTL get_param -n \
- lod.lustre-MDT0000-mdtlov.mdt_qos_thresholdrr | head -n1)
+ lod.lustre-MDT0000-mdtlov.mdt_qos_threshold_rr | head -n1)
lod_qos_threshold_rr=${lod_qos_threshold_rr%%%}
lod_qos_maxage=$(do_facet mds1 $LCTL get_param -n \
lod.lustre-MDT0000-mdtlov.qos_maxage | awk '{ print $1 }')
stack_trap "do_nodes $mdts $LCTL set_param \
lod.*.mdt_qos_prio_free=$lod_qos_prio_free > /dev/null" EXIT
stack_trap "do_nodes $mdts $LCTL set_param \
- lod.*.mdt_qos_thresholdrr=$lod_qos_threshold_rr > /dev/null" \
+ lod.*.mdt_qos_threshold_rr=$lod_qos_threshold_rr > /dev/null" \
EXIT
stack_trap "do_nodes $mdts $LCTL set_param \
lod.*.mdt_qos_maxage=$lod_qos_maxage > /dev/null" EXIT
echo "Mkdir (stripe_count $stripe_count) roundrobin:"
$LCTL set_param lmv.*.qos_threshold_rr=100 > /dev/null
- do_nodes $mdts $LCTL set_param lod.*.mdt_qos_thresholdrr=100 > /dev/null
+ do_nodes $mdts $LCTL set_param lod.*.mdt_qos_threshold_rr=100 > /dev/null
testdir=$DIR/$tdir-s$stripe_count/rr
$LCTL set_param lmv.*.qos_threshold_rr=$lmv_qos_threshold_rr > /dev/null
do_nodes $mdts $LCTL set_param \
- lod.*.mdt_qos_thresholdrr=$lod_qos_threshold_rr > /dev/null
+ lod.*.mdt_qos_threshold_rr=$lod_qos_threshold_rr > /dev/null
echo
echo "Check for uneven MDTs: "
git://git.whamcloud.com / fs / lustre-release.git / blobdiff