# as for remote client, the groups of the specified uid on MDT
# will be obtained by upcall /sbin/l_getidentity and used.
test_4() {
- local server_version=$(lustre_version_code $SINGLEMDS)
-
- [[ $server_version -ge $(version_code 2.6.93) ]] ||
- [[ $server_version -ge $(version_code 2.5.35) &&
- $server_version -lt $(version_code 2.5.50) ]] ||
- { skip "Need MDS version at least 2.6.93 or 2.5.35"; return; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.6.93) ]] ||
+ [[ "$MDS1_VERSION" -ge $(version_code 2.5.35) &&
+ "$MDS1_VERSION" -lt $(version_code 2.5.50) ]] ||
+ skip "Need MDS version at least 2.6.93 or 2.5.35"
rm -rf $DIR/$tdir
mkdir -p $DIR/$tdir
create_nodemaps() {
local i
- local out
local rc
squash_id default 99 0
return $rc
fi
- out=$(do_facet mgs $LCTL get_param nodemap.$csum.id)
- ## This needs to return zero if the following statement is 1
- [[ $(echo $out | grep -c $csum) == 0 ]] && return 1
+ wait_update_facet --verbose mgs \
+ "$LCTL get_param nodemap.$csum.id 2>/dev/null | \
+ grep -c $csum || true" 1 30 ||
+ return 1
done
for (( i = 0; i < NODEMAP_COUNT; i++ )); do
local csum=${HOSTNAME_CHECKSUM}_${i}
delete_nodemaps() {
local i
- local out
for ((i = 0; i < NODEMAP_COUNT; i++)); do
local csum=${HOSTNAME_CHECKSUM}_${i}
return 3
fi
- out=$(do_facet mgs $LCTL get_param nodemap.$csum.id 2>/dev/null)
- [[ $(echo $out | grep -c $csum) != 0 ]] && return 1
+ wait_update_facet --verbose mgs \
+ "$LCTL get_param nodemap.$csum.id 2>/dev/null | \
+ grep -c $csum || true" 0 30 ||
+ return 1
done
for (( i = 0; i < NODEMAP_COUNT; i++ )); do
local csum=${HOSTNAME_CHECKSUM}_${i}
}
update_idmaps() { #LU-10040
- [ $(lustre_version_code mgs) -lt $(version_code 2.10.55) ] &&
- skip "Need MGS >= 2.10.55" &&
- return
+ [ "$MGS_VERSION" -lt $(version_code 2.10.55) ] &&
+ skip "Need MGS >= 2.10.55"
+
local csum=${HOSTNAME_CHECKSUM}_0
local old_id_client=$ID0
local old_id_fs=$((ID0 + 1))
}
squash_id() {
- [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
- return
+ [ "$MGS_VERSION" -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $MGS_VERSION MGS < 2.5.53"
+
local cmd
cmd[0]="$LCTL nodemap_modify --property squash_uid"
test_7() {
local rc
- remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
- return
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ [ "$MGS_VERSION" -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $MGS_VERSION MGS < 2.5.53"
create_nodemaps
rc=$?
- [[ $rc != 0 ]] && error "nodemap_add failed with $rc" && return 1
+ [[ $rc != 0 ]] && error "nodemap_add failed with $rc"
delete_nodemaps
rc=$?
- [[ $rc != 0 ]] && error "nodemap_del failed with $rc" && return 2
+ [[ $rc != 0 ]] && error "nodemap_del failed with $rc"
return 0
}
test_8() {
local rc
- remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
- return
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ [ "$MGS_VERSION" -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $MGS_VERSION MGS < 2.5.53"
# Set up nodemaps
local i
local rc
- remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
- return
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ [ "$MGS_VERSION" -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $MGS_VERSION MGS < 2.5.53"
rc=0
create_nodemaps
test_10a() {
local rc
- remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
- return
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ [ "$MGS_VERSION" -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $MGS_VERSION MGS < 2.5.53"
rc=0
create_nodemaps
run_test 10a "nodemap reject duplicate ranges"
test_10b() {
- [ $(lustre_version_code mgs) -lt $(version_code 2.10.53) ] &&
- skip "Need MGS >= 2.10.53" && return
+ [ "$MGS_VERSION" -lt $(version_code 2.10.53) ] &&
+ skip "Need MGS >= 2.10.53"
local nm1="nodemap1"
local nm2="nodemap2"
run_test 10b "delete range from the correct nodemap"
test_10c() { #LU-8912
- [ $(lustre_version_code mgs) -lt $(version_code 2.10.57) ] &&
- skip "Need MGS >= 2.10.57" && return
+ [ "$MGS_VERSION" -lt $(version_code 2.10.57) ] &&
+ skip "Need MGS >= 2.10.57"
local nm="nodemap_lu8912"
local nid_range="10.210.[32-47].[0-255]@o2ib3"
run_test 10c "verfify contiguous range support"
test_10d() { #LU-8913
- [ $(lustre_version_code mgs) -lt $(version_code 2.10.59) ] &&
- skip "Need MGS >= 2.10.59" && return
+ [ "$MGS_VERSION" -lt $(version_code 2.10.59) ] &&
+ skip "Need MGS >= 2.10.59"
local nm="nodemap_lu8913"
local nid_range="*@o2ib3"
test_11() {
local rc
- remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
- return
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ [ "$MGS_VERSION" -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $MGS_VERSION MGS < 2.5.53"
rc=0
create_nodemaps
test_12() {
local rc
- remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
- return
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ [ "$MGS_VERSION" -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $MGS_VERSION MGS < 2.5.53"
rc=0
create_nodemaps
test_13() {
local rc
- remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
- return
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ [ "$MGS_VERSION" -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $MGS_VERSION MGS < 2.5.53"
rc=0
create_nodemaps
test_14() {
local rc
- remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
- return
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ [ "$MGS_VERSION" -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $MGS_VERSION MGS < 2.5.53"
rc=0
create_nodemaps
test_15() {
local rc
- remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
- return
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ [ "$MGS_VERSION" -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $MGS_VERSION MGS < 2.5.53"
rc=0
create_nodemaps
nodemap_version_check () {
remote_mgs_nodsh && skip "remote MGS with nodsh" && return 1
- [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
+ [ "$MGS_VERSION" -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $MGS_VERSION MGS < 2.5.53" &&
return 1
return 0
}
test_17() {
if $SHARED_KEY &&
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.55) ]; then
+ [ "$MDS1_VERSION" -lt $(version_code 2.11.55) ]; then
skip "Need MDS >= 2.11.55"
fi
test_18() {
if $SHARED_KEY &&
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.55) ]; then
+ [ "$MDS1_VERSION" -lt $(version_code 2.11.55) ]; then
skip "Need MDS >= 2.11.55"
fi
test_19() {
if $SHARED_KEY &&
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.55) ]; then
+ [ "$MDS1_VERSION" -lt $(version_code 2.11.55) ]; then
skip "Need MDS >= 2.11.55"
fi
test_20() {
if $SHARED_KEY &&
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.55) ]; then
+ [ "$MDS1_VERSION" -lt $(version_code 2.11.55) ]; then
skip "Need MDS >= 2.11.55"
fi
test_21() {
if $SHARED_KEY &&
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.55) ]; then
+ [ "$MDS1_VERSION" -lt $(version_code 2.11.55) ]; then
skip "Need MDS >= 2.11.55"
fi
test_22() {
if $SHARED_KEY &&
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.55) ]; then
+ [ "$MDS1_VERSION" -lt $(version_code 2.11.55) ]; then
skip "Need MDS >= 2.11.55"
fi
run_test 23a "test mapped regular ACLs"
test_23b() { #LU-9929
- [ $num_clients -lt 2 ] && skip "Need 2 clients at least" && return
- [ $(lustre_version_code mgs) -lt $(version_code 2.10.53) ] &&
- skip "Need MGS >= 2.10.53" && return
+ [ $num_clients -lt 2 ] && skip "Need 2 clients at least"
+ [ "$MGS_VERSION" -lt $(version_code 2.10.53) ] &&
+ skip "Need MGS >= 2.10.53"
export SK_UNIQUE_NM=true
nodemap_test_setup
}
test_27a() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.50) ] &&
- skip "Need MDS >= 2.11.50" && return
+ [ "$MDS1_VERSION" -lt $(version_code 2.11.50) ] &&
+ skip "Need MDS >= 2.11.50"
for nm in "default" "c0"; do
local subdir="subdir_${nm}"
run_test 27a "test fileset in various nodemaps"
test_27b() { #LU-10703
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.50) ] &&
- skip "Need MDS >= 2.11.50" && return
- [[ $MDSCOUNT -lt 2 ]] && skip "needs >= 2 MDTs" && return
+ [ "$MDS1_VERSION" -lt $(version_code 2.11.50) ] &&
+ skip "Need MDS >= 2.11.50"
+ [[ $MDSCOUNT -lt 2 ]] && skip "needs >= 2 MDTs"
nodemap_test_setup
trap nodemap_test_cleanup EXIT
touch $DIR/$tdir/$tfile || error "touch"
zconf_umount_clients ${clients_arr[0]} $MOUNT ||
error "unable to umount clients"
- keyctl show | awk '/lustre/ { print $1 }' |
- xargs -IX keyctl unlink X
+ do_node ${clients_arr[0]} "keyctl show |
+ awk '/lustre/ { print \\\$1 }' | xargs -IX keyctl unlink X"
OLD_SK_PATH=$SK_PATH
export SK_PATH=/dev/null
if zconf_mount_clients ${clients_arr[0]} $MOUNT; then
export SK_PATH=$OLD_SK_PATH
- if [ -e $DIR/$tdir/$tfile ]; then
+ do_node ${clients_arr[0]} "ls $DIR/$tdir/$tfile"
+ if [ $? -eq 0 ]; then
error "able to mount and read without key"
else
error "able to mount without key"
fi
else
export SK_PATH=$OLD_SK_PATH
- keyctl show | awk '/lustre/ { print $1 }' |
- xargs -IX keyctl unlink X
+ do_node ${clients_arr[0]} "keyctl show |
+ awk '/lustre/ { print \\\$1 }' |
+ xargs -IX keyctl unlink X"
fi
+ zconf_mount_clients ${clients_arr[0]} $MOUNT ||
+ error "unable to mount clients"
}
run_test 29 "check for missing shared key"
zconf_umount_clients ${clients_arr[0]} $MOUNT ||
error "unable to umount clients"
# unload keys from ring
- keyctl show | awk '/lustre/ { print $1 }' |
- xargs -IX keyctl unlink X
- # invalidate the key with bogus filesystem name
- lgss_sk -w $SK_PATH/$FSNAME-bogus.key -f $FSNAME.bogus \
- -t client -d /dev/urandom || error "lgss_sk failed (1)"
+ do_node ${clients_arr[0]} "keyctl show |
+ awk '/lustre/ { print \\\$1 }' | xargs -IX keyctl unlink X"
+ # generate key with bogus filesystem name
+ do_node ${clients_arr[0]} "lgss_sk -w $SK_PATH/$FSNAME-bogus.key \
+ -f $FSNAME.bogus -t client -d /dev/urandom" ||
+ error "lgss_sk failed (1)"
do_facet $SINGLEMDS lfs flushctx || error "could not run flushctx"
OLD_SK_PATH=$SK_PATH
export SK_PATH=$SK_PATH/$FSNAME-bogus.key
if zconf_mount_clients ${clients_arr[0]} $MOUNT; then
SK_PATH=$OLD_SK_PATH
- if [ -a $DIR/$tdir/$tdir.out ]; then
+ do_node ${clients_arr[0]} "ls $DIR/$tdir/$tdir.out"
+ if [ $? -eq 0 ]; then
error "mount and read file with invalid key"
else
error "mount with invalid key"
fi
fi
- SK_PATH=$OLD_SK_PATH
zconf_umount_clients ${clients_arr[0]} $MOUNT ||
error "unable to umount clients"
+ # unload keys from ring
+ do_node ${clients_arr[0]} "keyctl show |
+ awk '/lustre/ { print \\\$1 }' | xargs -IX keyctl unlink X"
+ rm -f $SK_PATH
+ SK_PATH=$OLD_SK_PATH
+ zconf_mount_clients ${clients_arr[0]} $MOUNT ||
+ error "unable to mount clients"
}
run_test 30 "check for invalid shared key"
+basic_ios() {
+ local flvr=$1
+
+ mkdir -p $DIR/$tdir || error "mkdir $flvr"
+ touch $DIR/$tdir/f0 || error "touch $flvr"
+ ls $DIR/$tdir || error "ls $flvr"
+ dd if=/dev/zero of=$DIR/$tdir/f0 conv=fsync bs=1M count=10 \
+ >& /dev/null || error "dd $flvr"
+ rm -f $DIR/$tdir/f0 || error "rm $flvr"
+ rmdir $DIR/$tdir || error "rmdir $flvr"
+
+ sync ; sync
+ echo 3 > /proc/sys/vm/drop_caches
+}
+
+test_30b() {
+ local save_flvr=$SK_FLAVOR
+
+ if ! $SHARED_KEY; then
+ skip "need shared key feature for this test"
+ fi
+
+ stack_trap restore_to_default_flavor EXIT
+
+ for flvr in skn ska ski skpi; do
+ # set flavor
+ SK_FLAVOR=$flvr
+ restore_to_default_flavor || error "cannot set $flvr flavor"
+ SK_FLAVOR=$save_flvr
+
+ basic_ios $flvr
+ done
+}
+run_test 30b "basic test of all different SSK flavors"
+
cleanup_31() {
# unmount client
zconf_umount $HOSTNAME $MOUNT || error "unable to umount client"
}
run_test 34 "deny_unknown on default nodemap"
+test_35() {
+ [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.13.50) ] ||
+ skip "Need MDS >= 2.13.50"
+
+ # activate changelogs
+ changelog_register || error "changelog_register failed"
+ local cl_user="${CL_USERS[$SINGLEMDS]%% *}"
+ changelog_users $SINGLEMDS | grep -q $cl_user ||
+ error "User $cl_user not found in changelog_users"
+ changelog_chmask ALL
+
+ # do some IOs
+ mkdir $DIR/$tdir || error "failed to mkdir $tdir"
+ touch $DIR/$tdir/$tfile || error "failed to touch $tfile"
+
+ # access changelogs with root
+ changelog_dump || error "failed to dump changelogs"
+ changelog_clear 0 || error "failed to clear changelogs"
+
+ # put clients in non-admin nodemap
+ nodemap_test_setup
+ stack_trap nodemap_test_cleanup EXIT
+ for i in $(seq 0 $((num_clients-1))); do
+ do_facet mgs $LCTL nodemap_modify --name c${i} \
+ --property admin --value 0
+ done
+ for i in $(seq 0 $((num_clients-1))); do
+ wait_nm_sync c${i} admin_nodemap
+ done
+
+ # access with mapped root
+ changelog_dump && error "dump changelogs should have failed"
+ changelog_clear 0 && error "clear changelogs should have failed"
+
+ exit 0
+}
+run_test 35 "Check permissions when accessing changelogs"
+
+setup_for_enc_tests() {
+ # remount client with test_dummy_encryption option
+ if is_mounted $MOUNT; then
+ umount_client $MOUNT || error "umount $MOUNT failed"
+ fi
+ mount_client $MOUNT ${MOUNT_OPTS},test_dummy_encryption ||
+ error "mount with '-o test_dummy_encryption' failed"
+
+ # this directory will be encrypted, because of dummy mode
+ mkdir $DIR/$tdir
+}
+
+cleanup_for_enc_tests() {
+ # remount client normally
+ if is_mounted $MOUNT; then
+ umount_client $MOUNT || error "umount $MOUNT failed"
+ fi
+ mount_client $MOUNT ${MOUNT_OPTS} ||
+ error "remount failed"
+
+ if is_mounted $MOUNT2; then
+ umount_client $MOUNT2 || error "umount $MOUNT2 failed"
+ fi
+ if [ "$MOUNT_2" ]; then
+ mount_client $MOUNT2 ${MOUNT_OPTS} ||
+ error "remount failed"
+ fi
+}
+
+cleanup_nodemap_after_enc_tests() {
+ do_facet mgs $LCTL nodemap_modify --name default \
+ --property forbid_encryption --value 1
+ wait_nm_sync default forbid_encryption
+ do_facet mgs $LCTL nodemap_activate 0
+ wait_nm_sync active
+}
+
+test_36() {
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+
+ # first make sure it is possible to enable encryption
+ # when nodemap is not active
+ setup_for_enc_tests
+ rmdir $DIR/$tdir
+ umount_client $MOUNT || error "umount $MOUNT failed (1)"
+
+ # then activate nodemap, and retry
+ # should succeed as encryption is not forbidden on default nodemap
+ # by default
+ stack_trap cleanup_nodemap_after_enc_tests EXIT
+ do_facet mgs $LCTL nodemap_activate 1
+ wait_nm_sync active
+ forbid=$(do_facet mgs lctl get_param -n nodemap.default.forbid_encryption)
+ [ $forbid -eq 0 ] || error "wrong default value for forbid_encryption"
+ mount_client $MOUNT ${MOUNT_OPTS},test_dummy_encryption ||
+ error "mount '-o test_dummy_encryption' failed with default"
+ umount_client $MOUNT || error "umount $MOUNT failed (2)"
+
+ # then forbid encryption, and retry
+ do_facet mgs $LCTL nodemap_modify --name default \
+ --property forbid_encryption --value 1
+ wait_nm_sync default forbid_encryption
+ mount_client $MOUNT ${MOUNT_OPTS},test_dummy_encryption &&
+ error "mount '-o test_dummy_encryption' should have failed"
+ return 0
+}
+run_test 36 "control if clients can use encryption"
+
+test_37() {
+ local testfile=$DIR/$tdir/$tfile
+ local tmpfile=$TMP/abc
+ local objdump=$TMP/objdump
+ local objid
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ [ "$ost1_FSTYPE" = ldiskfs ] || skip "ldiskfs only test (using debugfs)"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ # write a few bytes in file
+ echo "abc" > $tmpfile
+ $LFS setstripe -c1 -i0 $testfile
+ dd if=$tmpfile of=$testfile bs=4 count=1 conv=fsync
+ do_facet ost1 "sync; sync"
+
+ # check that content on ost is encrypted
+ objid=$($LFS getstripe $testfile | awk '/obdidx/{getline; print $2}')
+ do_facet ost1 "$DEBUGFS -c -R 'cat O/0/d$(($objid % 32))/$objid' \
+ $(ostdevname 1)" > $objdump
+ cmp -s $objdump $tmpfile &&
+ error "file $testfile is not encrypted on ost"
+
+ # check that in-memory representation of file is correct
+ cmp -bl ${tmpfile} ${testfile} ||
+ error "file $testfile is corrupted in memory"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl ${tmpfile} ${testfile} ||
+ error "file $testfile is corrupted on server"
+
+ rm -f $tmpfile $objdump
+}
+run_test 37 "simple encrypted file"
+
+test_38() {
+ local testfile=$DIR/$tdir/$tfile
+ local tmpfile=$TMP/abc
+ local objid
+ local blksz
+ local srvsz=0
+ local filesz
+ local bsize
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ # get block size on ost
+ blksz=$($LCTL get_param osc.$FSNAME*.import |
+ awk '/grant_block_size:/ { print $2; exit; }')
+ # write a few bytes in file at offset $blksz
+ echo "abc" > $tmpfile
+ $LFS setstripe -c1 -i0 $testfile
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=$blksz \
+ oflag=seek_bytes conv=fsync
+
+ # check that in-memory representation of file is correct
+ bsize=$(stat --format=%B $testfile)
+ filesz=$(stat --format=%b $testfile)
+ filesz=$((filesz*bsize))
+ [ $filesz -le $blksz ] ||
+ error "file $testfile is $filesz long in memory"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ bsize=$(stat --format=%B $testfile)
+ filesz=$(stat --format=%b $testfile)
+ filesz=$((filesz*bsize))
+ [ $filesz -le $blksz ] ||
+ error "file $testfile is $filesz long on server"
+
+ rm -f $tmpfile
+}
+run_test 38 "encrypted file with hole"
+
+test_39() {
+ local testfile=$DIR/$tdir/$tfile
+ local tmpfile=$TMP/abc
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ # write a few bytes in file
+ echo "abc" > $tmpfile
+ $LFS setstripe -c1 -i0 $testfile
+ dd if=$tmpfile of=$testfile bs=4 count=1 conv=fsync
+
+ # write a few more bytes in the same page
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=1024 oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ dd if=$tmpfile of=$tmpfile bs=4 count=1 seek=1024 oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted in memory"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted on server"
+
+ rm -f $tmpfile
+}
+run_test 39 "rewrite data in already encrypted page"
+
+test_40() {
+ local testfile=$DIR/$tdir/$tfile
+ local tmpfile=$TMP/abc
+ local tmpfile2=$TMP/abc2
+ local seek
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ # write a few bytes in file
+ echo "abc" > $tmpfile
+ $LFS setstripe -c1 -i0 $testfile
+ dd if=$tmpfile of=$testfile bs=4 count=1 conv=fsync
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted in memory (1)"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted on server (1)"
+
+ # write a few other bytes in same page
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=256 oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ dd if=$tmpfile of=$tmpfile bs=4 count=1 seek=256 oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted in memory (2)"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted on server (2)"
+
+ rm -f $testfile $tmpfile
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # write a few bytes in file, at end of first page
+ echo "abc" > $tmpfile
+ $LFS setstripe -c1 -i0 $testfile
+ seek=$(getconf PAGESIZE)
+ seek=$((seek - 4))
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ # write a few other bytes at beginning of first page
+ dd if=$tmpfile of=$testfile bs=4 count=1 conv=fsync,notrunc
+
+ dd if=$tmpfile of=$tmpfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted in memory (3)"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted on server (3)"
+
+ rm -f $testfile $tmpfile
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # write a few bytes in file, at beginning of second page
+ echo "abc" > $tmpfile
+ $LFS setstripe -c1 -i0 $testfile
+ seek=$(getconf PAGESIZE)
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+ dd if=$tmpfile of=$tmpfile2 bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ # write a few other bytes at end of first page
+ seek=$((seek - 4))
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+ dd if=$tmpfile of=$tmpfile2 bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile2 $testfile ||
+ error "file $testfile is corrupted in memory (4)"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile2 $testfile ||
+ error "file $testfile is corrupted on server (4)"
+
+ rm -f $testfile $tmpfile $tmpfile2
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # write a few bytes in file, at beginning of first stripe
+ echo "abc" > $tmpfile
+ $LFS setstripe -S 256k -c2 $testfile
+ dd if=$tmpfile of=$testfile bs=4 count=1 conv=fsync,notrunc
+
+ # write a few other bytes, at beginning of second stripe
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=262144 oflag=seek_bytes \
+ conv=fsync,notrunc
+ dd if=$tmpfile of=$tmpfile bs=4 count=1 seek=262144 oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted in memory (5)"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted on server (5)"
+
+ rm -f $tmpfile
+}
+run_test 40 "exercise size of encrypted file"
+
+test_41() {
+ local testfile=$DIR/$tdir/$tfile
+ local tmpfile=$TMP/abc
+ local tmpfile2=$TMP/abc2
+ local seek
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ echo "abc" > $tmpfile
+ seek=$(getconf PAGESIZE)
+ seek=$((seek - 204))
+ dd if=$tmpfile of=$tmpfile2 bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync
+ seek=$(getconf PAGESIZE)
+ seek=$((seek + 1092))
+ dd if=$tmpfile of=$tmpfile2 bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ # write a few bytes in file
+ $LFS setstripe -c1 -i0 -S 256k $testfile
+ seek=$(getconf PAGESIZE)
+ seek=$((seek - 204))
+ #define OBD_FAIL_OST_WR_ATTR_DELAY 0x250
+ do_facet ost1 "$LCTL set_param fail_loc=0x250 fail_val=15"
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync &
+
+ sleep 5
+ # write a few other bytes, at a different offset
+ seek=$(getconf PAGESIZE)
+ seek=$((seek + 1092))
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc &
+ wait
+ do_facet ost1 "$LCTL set_param fail_loc=0x0"
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile2 $testfile ||
+ error "file $testfile is corrupted in memory (1)"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile2 $testfile ||
+ error "file $testfile is corrupted on server (1)"
+
+ rm -f $tmpfile $tmpfile2
+}
+run_test 41 "test race on encrypted file size (1)"
+
+test_42() {
+ local testfile=$DIR/$tdir/$tfile
+ local testfile2=$DIR2/$tdir/$tfile
+ local tmpfile=$TMP/abc
+ local tmpfile2=$TMP/abc2
+ local pagesz=$(getconf PAGESIZE)
+ local seek
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ if is_mounted $MOUNT2; then
+ umount_client $MOUNT2 || error "umount $MOUNT2 failed"
+ fi
+ mount_client $MOUNT2 ${MOUNT_OPTS},test_dummy_encryption ||
+ error "mount2 with '-o test_dummy_encryption' failed"
+
+ # create file by writting one whole page
+ $LFS setstripe -c1 -i0 -S 256k $testfile
+ dd if=/dev/zero of=$testfile bs=$pagesz count=1 conv=fsync
+
+ # read file from 2nd mount point
+ cat $testfile2 > /dev/null
+
+ echo "abc" > $tmpfile
+ dd if=/dev/zero of=$tmpfile2 bs=$pagesz count=1 conv=fsync
+ seek=$((2*pagesz - 204))
+ dd if=$tmpfile of=$tmpfile2 bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+ seek=$((2*pagesz + 1092))
+ dd if=$tmpfile of=$tmpfile2 bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ # write a few bytes in file from 1st mount point
+ seek=$((2*pagesz - 204))
+ #define OBD_FAIL_OST_WR_ATTR_DELAY 0x250
+ do_facet ost1 "$LCTL set_param fail_loc=0x250 fail_val=15"
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc &
+
+ sleep 5
+ # write a few other bytes, at a different offset from 2nd mount point
+ seek=$((2*pagesz + 1092))
+ dd if=$tmpfile of=$testfile2 bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc &
+ wait
+ do_facet ost1 "$LCTL set_param fail_loc=0x0"
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile2 $testfile ||
+ error "file $testfile is corrupted in memory (1)"
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile2 $testfile2 ||
+ error "file $testfile is corrupted in memory (2)"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile2 $testfile ||
+ error "file $testfile is corrupted on server (1)"
+
+ rm -f $tmpfile $tmpfile2
+}
+run_test 42 "test race on encrypted file size (2)"
+
+test_43() {
+ local testfile=$DIR/$tdir/$tfile
+ local testfile2=$DIR2/$tdir/$tfile
+ local tmpfile=$TMP/abc
+ local tmpfile2=$TMP/abc2
+ local resfile=$TMP/res
+ local pagesz=$(getconf PAGESIZE)
+ local seek
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ if is_mounted $MOUNT2; then
+ umount_client $MOUNT2 || error "umount $MOUNT2 failed"
+ fi
+ mount_client $MOUNT2 ${MOUNT_OPTS},test_dummy_encryption ||
+ error "mount2 with '-o test_dummy_encryption' failed"
+
+ # create file
+ tr '\0' '1' < /dev/zero |
+ dd of=$tmpfile bs=$pagesz count=1 conv=fsync
+ $LFS setstripe -c1 -i0 -S 256k $testfile
+ cp $tmpfile $testfile
+
+ # read file from 2nd mount point
+ cat $testfile2 > /dev/null
+
+ # write a few bytes in file from 1st mount point
+ echo "abc" > $tmpfile2
+ seek=$((2*pagesz - 204))
+ #define OBD_FAIL_OST_WR_ATTR_DELAY 0x250
+ do_facet ost1 "$LCTL set_param fail_loc=0x250 fail_val=15"
+ dd if=$tmpfile2 of=$testfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc &
+
+ sleep 5
+ # read file from 2nd mount point
+ dd if=$testfile2 of=$resfile bs=$pagesz count=1 conv=fsync,notrunc
+ cmp -bl $tmpfile $resfile ||
+ error "file $testfile is corrupted in memory (1)"
+
+ wait
+ do_facet ost1 "$LCTL set_param fail_loc=0x0"
+
+ # check that in-memory representation of file is correct
+ dd if=$tmpfile2 of=$tmpfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+ cmp -bl $tmpfile $testfile2 ||
+ error "file $testfile is corrupted in memory (2)"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted on server (1)"
+
+ rm -f $tmpfile $tmpfile2
+}
+run_test 43 "test race on encrypted file size (3)"
+
+test_44() {
+ local testfile=$DIR/$tdir/$tfile
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ which vmtouch || skip "This test needs vmtouch utility"
+
+ # Direct I/O is not supported on encrypted files.
+ # Attempts to use direct I/O on such files should fall back to
+ # buffered I/O.
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ # write a page in file with O_DIRECT
+ $LFS setstripe -c1 -i0 $testfile
+ dd if=/dev/urandom of=$testfile bs=4096 count=1 conv=fsync oflag=direct
+
+ respage=$(vmtouch $testfile | awk '/Resident\ Pages:/ {print $3}')
+ [ "$respage" == "1/1" ] ||
+ error "write to enc file did not fall back to buffered IO"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ dd if=$testfile of=/dev/null bs=4096 count=1 iflag=direct
+
+ respage=$(vmtouch $testfile | awk '/Resident\ Pages:/ {print $3}')
+ [ "$respage" == "1/1" ] ||
+ error "write to enc file did not fall back to buffered IO"
+}
+run_test 44 "encrypted file access semantics: direct IO"
+
+test_45() {
+ local testfile=$DIR/$tdir/$tfile
+ local tmpfile=$TMP/junk
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ $LFS setstripe -c1 -i0 $testfile
+ dd if=/dev/zero of=$testfile bs=512K count=1
+ $MULTIOP $testfile OSMRUc || error "$MULTIOP $testfile failed (1)"
+ $MULTIOP $testfile OSMWUc || error "$MULTIOP $testfile failed (2)"
+
+ dd if=/dev/zero of=$tmpfile bs=512K count=1
+ $MULTIOP $tmpfile OSMWUc || error "$MULTIOP $tmpfile failed"
+ $MMAP_CAT $tmpfile > ${tmpfile}2
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ $MMAP_CAT $testfile > ${testfile}2
+ cmp -bl ${tmpfile}2 ${testfile}2 ||
+ error "file $testfile is corrupted"
+
+ rm -f $tmpfile ${tmpfile}2
+}
+run_test 45 "encrypted file access semantics: MMAP"
+
+test_46() {
+ local testdir=$DIR/$tdir/mydir
+ local testfile=$testdir/myfile
+ local lsfile=$TMP/lsfile
+ local scrambleddir
+ local scrambledfile
+
+ local testfile2=$DIR/$tdir/${tfile}.2
+ local tmpfile=$DIR/junk
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ touch $DIR/onefile
+ touch $DIR/$tdir/$tfile
+ mkdir $testdir
+ echo test > $testfile
+ sync ; echo 3 > /proc/sys/vm/drop_caches
+
+ # remove fscrypt key from keyring
+ keyctl revoke $(keyctl show | awk '$7 ~ "^fscrypt:" {print $1}')
+ keyctl reap
+
+ scrambleddir=$(find $DIR/$tdir/ -maxdepth 1 -mindepth 1 -type d)
+ ls -1 $scrambleddir > $lsfile || error "ls $testdir failed"
+
+ scrambledfile=$scrambleddir/$(head -n 1 $lsfile)
+ stat $scrambledfile || error "stat $scrambledfile failed"
+ rm -f $lsfile
+
+ cat $scrambledfile && error "cat $scrambledfile should have failed"
+
+ touch $scrambleddir/otherfile &&
+ error "touch otherfile should have failed"
+ ls $scrambleddir/otherfile && error "otherfile should not exist"
+ mkdir $scrambleddir/otherdir &&
+ error "mkdir otherdir should have failed"
+ ls -d $scrambleddir/otherdir && error "otherdir should not exist"
+
+ rm -f $scrambledfile || error "rm $scrambledfile failed"
+ rmdir $scrambleddir || error "rmdir $scrambleddir failed"
+
+ rm -f $DIR/onefile
+}
+run_test 46 "encrypted file access semantics without key"
+
+test_47() {
+ local testfile=$DIR/$tdir/$tfile
+ local testfile2=$DIR/$tdir/${tfile}.2
+ local tmpfile=$DIR/junk
+ local scrambleddir
+ local scrambledfile
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ dd if=/dev/zero of=$tmpfile bs=512K count=1
+ mrename $tmpfile $testfile &&
+ error "rename from unencrypted to encrypted dir should fail"
+
+ ln $tmpfile $testfile &&
+ error "link from unencrypted to encrypted dir should fail"
+
+ cp $tmpfile $testfile ||
+ error "cp from unencrypted to encrypted dir should succeed"
+ rm -f $tmpfile
+
+ mrename $testfile $testfile2 ||
+ error "rename from within encrypted dir should succeed"
+
+ ln $testfile2 $testfile ||
+ error "link from within encrypted dir should succeed"
+ rm -f $testfile
+
+ ln $testfile2 $tmpfile ||
+ error "link from encrypted to unencrypted dir should succeed"
+ rm -f $tmpfile
+
+ mrename $testfile2 $tmpfile ||
+ error "rename from encrypted to unencrypted dir should succeed"
+
+ dd if=/dev/zero of=$testfile bs=512K count=1
+ mkdir $DIR/$tdir/mydir
+ sync ; echo 3 > /proc/sys/vm/drop_caches
+
+ # remove fscrypt key from keyring
+ keyctl revoke $(keyctl show | awk '$7 ~ "^fscrypt:" {print $1}')
+ keyctl reap
+
+ scrambleddir=$(find $DIR/$tdir/ -maxdepth 1 -mindepth 1 -type d)
+ scrambledfile=$(find $DIR/$tdir/ -maxdepth 1 -type f)
+ ln $scrambledfile $scrambleddir/linkfile &&
+ error "ln linkfile should have failed"
+ mrename $scrambledfile $DIR/onefile2 &&
+ error "mrename from $scrambledfile should have failed"
+ touch $DIR/onefile
+ mrename $DIR/onefile $scrambleddir/otherfile &&
+ error "mrename to $scrambleddir should have failed"
+
+ rm -f $tmpfile $DIR/onefile
+}
+run_test 47 "encrypted file access semantics: rename/link"
+
+test_48a() {
+ local save="$TMP/$TESTSUITE-$TESTNAME.parameters"
+ local testfile=$DIR/$tdir/$tfile
+ local tmpfile=$TMP/111
+ local tmpfile2=$TMP/abc
+ local pagesz=$(getconf PAGESIZE)
+ local sz
+ local seek
+ local scrambledfile
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ # create file, 4 x PAGE_SIZE long
+ tr '\0' '1' < /dev/zero |
+ dd of=$tmpfile bs=4x$pagesz count=1 conv=fsync
+ $LFS setstripe -c1 -i0 $testfile
+ cp $tmpfile $testfile
+ echo "abc" > $tmpfile2
+
+ # decrease size: truncate to PAGE_SIZE
+ $TRUNCATE $tmpfile $pagesz
+ $TRUNCATE $testfile $pagesz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (1)"
+
+ # increase size: truncate to 2 x PAGE_SIZE
+ sz=$((pagesz*2))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (2)"
+
+ # write in 2nd page
+ seek=$((pagesz+100))
+ dd if=$tmpfile2 of=$tmpfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+ dd if=$tmpfile2 of=$testfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (3)"
+
+ # truncate to PAGE_SIZE / 2
+ sz=$((pagesz/2))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (4)"
+
+ # lockless truncate should be turned into regular truncate for enc file
+ save_lustre_params client "osc.*.lockless_truncate" > $save
+ # restore lockless_truncate default values on exit
+ stack_trap "restore_lustre_params < $save; rm -f $save" EXIT
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ lctl set_param -n osc.*.lockless_truncate 1
+ cancel_lru_locks osc
+ clear_stats osc.*.osc_stats
+ $TRUNCATE $testfile 8000000 || error "truncate failed (1)"
+ [ $(calc_stats osc.*.osc_stats lockless_truncate) -eq 0 ] ||
+ error "lockless truncate should be turned into regular truncate"
+ lctl set_param -n osc.*.lockless_truncate 0
+
+ # truncate to a smaller, non-multiple of PAGE_SIZE, non-multiple of 16
+ sz=$((sz-7))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (5)"
+
+ # truncate to a larger, non-multiple of PAGE_SIZE, non-multiple of 16
+ sz=$((sz+18))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (6)"
+
+ # truncate to a larger, non-multiple of PAGE_SIZE, in a different page
+ sz=$((sz+pagesz+30))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (7)"
+
+ sync ; echo 3 > /proc/sys/vm/drop_caches
+
+ # remove fscrypt key from keyring
+ keyctl revoke $(keyctl show | awk '$7 ~ "^fscrypt:" {print $1}')
+ keyctl reap
+
+ scrambledfile=$(find $DIR/$tdir/ -maxdepth 1 -type f)
+ $TRUNCATE $scrambledfile 0 &&
+ error "truncate $scrambledfile should have failed without key"
+
+ rm -f $tmpfile $tmpfile2
+}
+run_test 48a "encrypted file access semantics: truncate"
+
+cleanup_for_enc_tests_othercli() {
+ local othercli=$1
+
+ # remount othercli normally
+ zconf_umount $othercli $MOUNT ||
+ error "umount $othercli $MOUNT failed"
+ zconf_mount $othercli $MOUNT ||
+ error "remount $othercli $MOUNT failed"
+}
+
+test_48b() {
+ local othercli
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ [ "$num_clients" -ge 2 ] || skip "Need at least 2 clients"
+
+ if [ "$HOSTNAME" == ${clients_arr[0]} ]; then
+ othercli=${clients_arr[1]}
+ else
+ othercli=${clients_arr[0]}
+ fi
+
+ stack_trap cleanup_for_enc_tests EXIT
+ stack_trap "cleanup_for_enc_tests_othercli $othercli" EXIT
+ setup_for_enc_tests
+ zconf_umount $othercli $MOUNT ||
+ error "umount $othercli $MOUNT failed"
+
+ cp /bin/sleep $DIR/$tdir/
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ $DIR/$tdir/sleep 30 &
+ # mount and IOs must be done in the same shell session, otherwise
+ # encryption key in session keyring is missing
+ do_node $othercli "$MOUNT_CMD -o ${MOUNT_OPTS},test_dummy_encryption \
+ $MGSNID:/$FSNAME $MOUNT && \
+ $TRUNCATE $DIR/$tdir/sleep 7"
+ wait || error "wait error"
+ cmp --silent /bin/sleep $DIR/$tdir/sleep ||
+ error "/bin/sleep and $DIR/$tdir/sleep differ"
+}
+run_test 48b "encrypted file: concurrent truncate"
+
+trace_cmd() {
+ local cmd="$@"
+ local xattr_name="security.c"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ $LCTL set_param debug=+info
+ $LCTL clear
+
+ echo $cmd
+ eval $cmd
+
+ $LCTL dk | grep -E "get xattr '${xattr_name}'|get xattrs"
+ [ $? -ne 0 ] || error "get xattr event was triggered"
+}
+
+test_49() {
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ local dirname=$DIR/$tdir/subdir
+
+ mkdir $dirname
+
+ trace_cmd stat $dirname
+ trace_cmd touch $dirname/f1
+ trace_cmd stat $dirname/f1
+ trace_cmd cat $dirname/f1
+ dd if=/dev/zero of=$dirname/f1 bs=1M count=10 conv=fsync
+ trace_cmd $TRUNCATE $dirname/f1 10240
+ trace_cmd $LFS setstripe -E -1 -S 4M $dirname/f2
+ trace_cmd $LFS migrate -E -1 -S 256K $dirname/f2
+ trace_cmd $LFS setdirstripe -i 1 $dirname/d2
+ trace_cmd $LFS migrate -m 0 $dirname/d2
+
+ $LFS setdirstripe -i 1 -c 1 $dirname/d3
+ dirname=$dirname/d3/subdir
+ mkdir $dirname
+
+ trace_cmd stat $dirname
+ trace_cmd touch $dirname/f1
+ trace_cmd stat $dirname/f1
+ trace_cmd cat $dirname/f1
+ dd if=/dev/zero of=$dirname/f1 bs=1M count=10 conv=fsync
+ trace_cmd $TRUNCATE $dirname/f1 10240
+ trace_cmd $LFS setstripe -E -1 -S 4M $dirname/f2
+ trace_cmd $LFS migrate -E -1 -S 256K $dirname/f2
+}
+run_test 49 "Avoid getxattr for encryption context"
+
+test_50() {
+ local testfile=$DIR/$tdir/$tfile
+ local tmpfile=$TMP/abc
+ local pagesz=$(getconf PAGESIZE)
+ local sz
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ # write small file, data on MDT only
+ tr '\0' '1' < /dev/zero |
+ dd of=$tmpfile bs=1 count=5000 conv=fsync
+ $LFS setstripe -E 1M -L mdt -E EOF $testfile
+ cp $tmpfile $testfile
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted in memory"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted on server"
+
+ # decrease size: truncate to PAGE_SIZE
+ $TRUNCATE $tmpfile $pagesz
+ $TRUNCATE $testfile $pagesz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (1)"
+
+ # increase size: truncate to 2 x PAGE_SIZE
+ sz=$((pagesz*2))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (2)"
+
+ # truncate to PAGE_SIZE / 2
+ sz=$((pagesz/2))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (3)"
+
+ # truncate to a smaller, non-multiple of PAGE_SIZE, non-multiple of 16
+ sz=$((sz-7))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (4)"
+
+ # truncate to a larger, non-multiple of PAGE_SIZE, non-multiple of 16
+ sz=$((sz+18))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (5)"
+
+ # truncate to a larger, non-multiple of PAGE_SIZE, in a different page
+ sz=$((sz+pagesz+30))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (6)"
+
+ rm -f $testfile
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # write hole in file, data spread on MDT and OST
+ tr '\0' '2' < /dev/zero |
+ dd of=$tmpfile bs=1 count=1539 seek=1539074 conv=fsync,notrunc
+ $LFS setstripe -E 1M -L mdt -E EOF $testfile
+ cp --sparse=always $tmpfile $testfile
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted in memory"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted on server"
+
+ # truncate to a smaller, non-multiple of PAGE_SIZE, non-multiple of 16,
+ # inside OST part of data
+ sz=$((1024*1024+13))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (7)"
+
+ # truncate to a smaller, non-multiple of PAGE_SIZE, non-multiple of 16,
+ # inside MDT part of data
+ sz=7
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (8)"
+
+ # truncate to a larger, non-multiple of PAGE_SIZE, non-multiple of 16,
+ # inside MDT part of data
+ sz=$((1024*1024-13))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (9)"
+
+ # truncate to a larger, non-multiple of PAGE_SIZE, non-multiple of 16,
+ # inside OST part of data
+ sz=$((1024*1024+7))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (10)"
+
+ rm -f $tmpfile
+}
+run_test 50 "DoM encrypted file"
+
log "cleanup: ======================================================"
sec_unsetup() {