set -e
ONLY=${ONLY:-"$*"}
-# bug number for skipped test: 19430 19967 19967
-ALWAYS_EXCEPT=" 2 5 6 $SANITY_SEC_EXCEPT"
+# bug number for skipped test:
+ALWAYS_EXCEPT=" $SANITY_SEC_EXCEPT"
+if $SHARED_KEY; then
+# bug number for skipped test: 9145 9145 9671 9145 9145 9145 9145 9245
+ ALWAYS_EXCEPT=" 17 18 19 20 21 22 23 27 $ALWAYS_EXCEPT"
+fi
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
-[ "$ALWAYS_EXCEPT$EXCEPT" ] && \
- echo "Skipping tests: $ALWAYS_EXCEPT $EXCEPT"
-
-SRCDIR=`dirname $0`
+SRCDIR=$(dirname $0)
export PATH=$PWD/$SRCDIR:$SRCDIR:$PWD/$SRCDIR/../utils:$PATH:/sbin
export NAME=${NAME:-local}
-LUSTRE=${LUSTRE:-`dirname $0`/..}
+LUSTRE=${LUSTRE:-$(dirname $0)/..}
. $LUSTRE/tests/test-framework.sh
init_test_env $@
. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
init_logging
-RUNAS="runas"
+NODEMAP_TESTS=$(seq 7 26)
+
+if ! check_versions; then
+ echo "It is NOT necessary to test nodemap under interoperation mode"
+ EXCEPT="$EXCEPT $NODEMAP_TESTS"
+fi
+
+[ "$SLOW" = "no" ] && EXCEPT_SLOW="26"
+
+[ "$ALWAYS_EXCEPT$EXCEPT$EXCEPT_SLOW" ] &&
+ echo "Skipping tests: $ALWAYS_EXCEPT $EXCEPT $EXCEPT_SLOW"
+
+RUNAS_CMD=${RUNAS_CMD:-runas}
WTL=${WTL:-"$LUSTRE/tests/write_time_limit"}
HOSTNAME_CHECKSUM=$(hostname | sum | awk '{ print $1 }')
SUBNET_CHECKSUM=$(expr $HOSTNAME_CHECKSUM % 250 + 1)
-NODEMAP_COUNT=10
+NODEMAP_COUNT=16
NODEMAP_RANGE_COUNT=3
-NODEMAP_IPADDR_COUNT=30
-NODEMAP_MAX_ID=600
+NODEMAP_IPADDR_LIST="1 10 64 128 200 250"
+NODEMAP_MAX_ID=128
require_dsh_mds || exit 0
require_dsh_ost || exit 0
+clients=${CLIENTS//,/ }
+num_clients=$(get_node_count ${clients})
+clients_arr=($clients)
+
ID0=${ID0:-500}
ID1=${ID1:-501}
-USER0=`cat /etc/passwd|grep :$ID0:$ID0:|cut -d: -f1`
-USER1=`cat /etc/passwd|grep :$ID1:$ID1:|cut -d: -f1`
+USER0=$(getent passwd | grep :$ID0:$ID0: | cut -d: -f1)
+USER1=$(getent passwd | grep :$ID1:$ID1: | cut -d: -f1)
+
+[ -z "$USER0" ] &&
+ skip "need to add user0 ($ID0:$ID0)" && exit 0
-[ -z "$USER0" ] && \
- echo "Please add user0 (uid=$ID0 gid=$ID0)! Skip sanity-sec" && exit 0
+[ -z "$USER1" ] &&
+ skip "need to add user1 ($ID1:$ID1)" && exit 0
-[ -z "$USER1" ] && \
- echo "Please add user1 (uid=$ID1 gid=$ID1)! Skip sanity-sec" && exit 0
+IDBASE=${IDBASE:-60000}
+
+# changes to mappings must be reflected in test 23
+FOPS_IDMAPS=(
+ [0]="$((IDBASE+3)):$((IDBASE+0)) $((IDBASE+4)):$((IDBASE+2))"
+ [1]="$((IDBASE+5)):$((IDBASE+1)) $((IDBASE+6)):$((IDBASE+2))"
+ )
check_and_setup_lustre
}
DIR=${DIR:-$MOUNT}
-[ -z "`echo $DIR | grep $MOUNT`" ] && \
+[ -z "$(echo $DIR | grep $MOUNT)" ] &&
error "$DIR not in $MOUNT" && sec_cleanup && exit 1
-[ `echo $MOUNT | wc -w` -gt 1 ] && \
+[ $(echo $MOUNT | wc -w) -gt 1 ] &&
echo "NAME=$MOUNT mounted more than once" && sec_cleanup && exit 0
-[ $MDSCOUNT -gt 1 ] && \
- echo "skip multi-MDS test" && sec_cleanup && exit 0
-
# for GSS_SUP
GSS_REF=$(lsmod | grep ^ptlrpc_gss | awk '{print $3}')
if [ ! -z "$GSS_REF" -a "$GSS_REF" != "0" ]; then
[ -z "$MDT" ] && error "fail to get MDT device" && exit 1
do_facet $SINGLEMDS "mkdir -p $CONFDIR"
IDENTITY_FLUSH=mdt.$MDT.identity_flush
-MDSCAPA=mdt.$MDT.capa
-CAPA_TIMEOUT=mdt.$MDT.capa_timeout
-MDSSECLEVEL=mdt.$MDT.sec_level
-
-# for CLIENT_TYPE
-if [ -z "$(lctl get_param -n llite.*.client_type | grep remote 2>/dev/null)" ]; then
- CLIENT_TYPE="local"
- echo "local client"
-else
- CLIENT_TYPE="remote"
- echo "remote client"
-fi
+IDENTITY_UPCALL=mdt.$MDT.identity_upcall
SAVE_PWD=$PWD
local user=$1
local group=$2
- if ! $RUNAS -u $user krb5_login.sh; then
+ $GSS_KRB5 || return
+ if ! $RUNAS_CMD -u $user krb5_login.sh; then
error "$user login kerberos failed."
exit 1
fi
- if ! $RUNAS -u $user -g $group ls $DIR > /dev/null 2>&1; then
- $RUNAS -u $user lfs flushctx -k
- $RUNAS -u $user krb5_login.sh
- if ! $RUNAS -u $user -g $group ls $DIR > /dev/null 2>&1; then
- error "init $user $group failed."
- exit 2
- fi
+ if ! $RUNAS_CMD -u $user -g $group ls $DIR > /dev/null 2>&1; then
+ $RUNAS_CMD -u $user lfs flushctx -k
+ $RUNAS_CMD -u $user krb5_login.sh
+ if ! $RUNAS_CMD -u$user -g$group ls $DIR > /dev/null 2>&1; then
+ error "init $user $group failed."
+ exit 2
+ fi
fi
}
declare -a identity_old
sec_setup() {
- for num in `seq $MDSCOUNT`; do
- switch_identity $num true || identity_old[$num]=$?
- done
+ for num in $(seq $MDSCOUNT); do
+ switch_identity $num true || identity_old[$num]=$?
+ done
- if ! $RUNAS -u $ID0 ls $DIR > /dev/null 2>&1; then
+ if ! $RUNAS_CMD -u $ID0 ls $DIR > /dev/null 2>&1; then
sec_login $USER0 $USER0
fi
- if ! $RUNAS -u $ID1 ls $DIR > /dev/null 2>&1; then
+ if ! $RUNAS_CMD -u $ID1 ls $DIR > /dev/null 2>&1; then
sec_login $USER1 $USER1
fi
}
chmod 0755 $DIR || error "chmod (1)"
rm -rf $DIR/$tdir || error "rm (1)"
mkdir -p $DIR/$tdir || error "mkdir (1)"
-
- if [ "$CLIENT_TYPE" = "remote" ]; then
- do_facet $SINGLEMDS "echo '* 0 normtown' > $PERM_CONF"
- do_facet $SINGLEMDS "lctl set_param -n $IDENTITY_FLUSH=-1"
- chown $USER0 $DIR/$tdir && error "chown (1)"
- do_facet $SINGLEMDS "echo '* 0 rmtown' > $PERM_CONF"
- do_facet $SINGLEMDS "lctl set_param -n $IDENTITY_FLUSH=-1"
- else
- chown $USER0 $DIR/$tdir || error "chown (2)"
- fi
-
- $RUNAS -u $ID0 ls $DIR || error "ls (1)"
- rm -f $DIR/f0 || error "rm (2)"
- $RUNAS -u $ID0 touch $DIR/f0 && error "touch (1)"
- $RUNAS -u $ID0 touch $DIR/$tdir/f1 || error "touch (2)"
- $RUNAS -u $ID1 touch $DIR/$tdir/f2 && error "touch (3)"
+ chown $USER0 $DIR/$tdir || error "chown (2)"
+ $RUNAS_CMD -u $ID0 ls $DIR || error "ls (1)"
+ rm -f $DIR/f0 || error "rm (2)"
+ $RUNAS_CMD -u $ID0 touch $DIR/f0 && error "touch (1)"
+ $RUNAS_CMD -u $ID0 touch $DIR/$tdir/f1 || error "touch (2)"
+ $RUNAS_CMD -u $ID1 touch $DIR/$tdir/f2 && error "touch (3)"
touch $DIR/$tdir/f3 || error "touch (4)"
chown root $DIR/$tdir || error "chown (3)"
chgrp $USER0 $DIR/$tdir || error "chgrp (1)"
chmod 0775 $DIR/$tdir || error "chmod (2)"
- $RUNAS -u $ID0 touch $DIR/$tdir/f4 || error "touch (5)"
- $RUNAS -u $ID1 touch $DIR/$tdir/f5 && error "touch (6)"
+ $RUNAS_CMD -u $ID0 touch $DIR/$tdir/f4 || error "touch (5)"
+ $RUNAS_CMD -u $ID1 touch $DIR/$tdir/f5 && error "touch (6)"
touch $DIR/$tdir/f6 || error "touch (7)"
rm -rf $DIR/$tdir || error "rm (3)"
-
- if [ "$CLIENT_TYPE" = "remote" ]; then
- do_facet $SINGLEMDS "rm -f $PERM_CONF"
- do_facet $SINGLEMDS "lctl set_param -n $IDENTITY_FLUSH=-1"
- fi
}
run_test 0 "uid permission ============================="
test_1() {
[ $GSS_SUP = 0 ] && skip "without GSS support." && return
- if [ "$CLIENT_TYPE" = "remote" ]; then
- do_facet $SINGLEMDS "echo '* 0 rmtown' > $PERM_CONF"
- do_facet $SINGLEMDS "lctl set_param -n $IDENTITY_FLUSH=-1"
- fi
-
rm -rf $DIR/$tdir
mkdir -p $DIR/$tdir
chown $USER0 $DIR/$tdir || error "chown (1)"
- $RUNAS -u $ID1 -v $ID0 touch $DIR/$tdir/f0 && error "touch (2)"
+ $RUNAS_CMD -u $ID1 -v $ID0 touch $DIR/$tdir/f0 && error "touch (2)"
echo "enable uid $ID1 setuid"
do_facet $SINGLEMDS "echo '* $ID1 setuid' >> $PERM_CONF"
do_facet $SINGLEMDS "lctl set_param -n $IDENTITY_FLUSH=-1"
- $RUNAS -u $ID1 -v $ID0 touch $DIR/$tdir/f1 || error "touch (3)"
+ $RUNAS_CMD -u $ID1 -v $ID0 touch $DIR/$tdir/f1 || error "touch (3)"
chown root $DIR/$tdir || error "chown (4)"
chgrp $USER0 $DIR/$tdir || error "chgrp (5)"
chmod 0770 $DIR/$tdir || error "chmod (6)"
- $RUNAS -u $ID1 -g $ID1 touch $DIR/$tdir/f2 && error "touch (7)"
- $RUNAS -u $ID1 -g $ID1 -j $ID0 touch $DIR/$tdir/f3 && error "touch (8)"
+ $RUNAS_CMD -u $ID1 -g $ID1 touch $DIR/$tdir/f2 && error "touch (7)"
+ $RUNAS_CMD -u$ID1 -g$ID1 -j$ID0 touch $DIR/$tdir/f3 && error "touch (8)"
echo "enable uid $ID1 setuid,setgid"
do_facet $SINGLEMDS "echo '* $ID1 setuid,setgid' > $PERM_CONF"
do_facet $SINGLEMDS "lctl set_param -n $IDENTITY_FLUSH=-1"
- $RUNAS -u $ID1 -g $ID1 -j $ID0 touch $DIR/$tdir/f4 || error "touch (9)"
- $RUNAS -u $ID1 -v $ID0 -g $ID1 -j $ID0 touch $DIR/$tdir/f5 || error "touch (10)"
+ $RUNAS_CMD -u $ID1 -g $ID1 -j $ID0 touch $DIR/$tdir/f4 ||
+ error "touch (9)"
+ $RUNAS_CMD -u $ID1 -v $ID0 -g $ID1 -j $ID0 touch $DIR/$tdir/f5 ||
+ error "touch (10)"
rm -rf $DIR/$tdir
}
run_test 1 "setuid/gid ============================="
-run_rmtacl_subtest() {
- $SAVE_PWD/rmtacl/run $SAVE_PWD/rmtacl/$1.test
- return $?
-}
-
-# remote_acl
-# for remote client only
-test_2 () {
- [ "$CLIENT_TYPE" = "local" ] && \
- skip "remote_acl for remote client only" && return
- [ -z "$(lctl get_param -n mdc.*-mdc-*.connect_flags | grep ^acl)" ] && \
- skip "must have acl enabled" && return
- [ -z "$(which setfacl 2>/dev/null)" ] && \
- skip "could not find setfacl" && return
- [ "$UID" != 0 ] && skip "must run as root" && return
-
- do_facet $SINGLEMDS "echo '* 0 rmtacl,rmtown' > $PERM_CONF"
- do_facet $SINGLEMDS "lctl set_param -n $IDENTITY_FLUSH=-1"
-
- sec_login root root
- sec_login bin bin
- sec_login daemon daemon
- sec_login games users
-
- SAVE_UMASK=`umask`
- umask 0022
- cd $DIR
-
- echo "performing cp ..."
- run_rmtacl_subtest cp || error "cp"
- echo "performing getfacl-noacl..."
- run_rmtacl_subtest getfacl-noacl || error "getfacl-noacl"
- echo "performing misc..."
- run_rmtacl_subtest misc || error "misc"
- echo "performing permissions..."
- run_rmtacl_subtest permissions || error "permissions"
- echo "performing setfacl..."
- run_rmtacl_subtest setfacl || error "setfacl"
-
- # inheritance test got from HP
- echo "performing inheritance..."
- cp $SAVE_PWD/rmtacl/make-tree .
- chmod +x make-tree
- run_rmtacl_subtest inheritance || error "inheritance"
- rm -f make-tree
-
- cd $SAVE_PWD
- umask $SAVE_UMASK
-
- do_facet $SINGLEMDS "rm -f $PERM_CONF"
- do_facet $SINGLEMDS "lctl set_param -n $IDENTITY_FLUSH=-1"
-}
-run_test 2 "rmtacl ============================="
-
-# rootsquash
-# root_squash will be redesigned in Lustre 1.7
-test_3() {
- skip "root_squash will be redesigned in Lustre 1.7" && return
-}
-run_test 3 "rootsquash ============================="
-
# bug 3285 - supplementary group should always succeed.
# NB: the supplementary groups are set for local client only,
# as for remote client, the groups of the specified uid on MDT
# will be obtained by upcall /sbin/l_getidentity and used.
test_4() {
- if [ "$CLIENT_TYPE" = "remote" ]; then
- do_facet $SINGLEMDS "echo '* 0 rmtown' > $PERM_CONF"
- do_facet $SINGLEMDS "lctl set_param -n $IDENTITY_FLUSH=-1"
- fi
+ local server_version=$(lustre_version_code $SINGLEMDS)
+
+ [[ $server_version -ge $(version_code 2.6.93) ]] ||
+ [[ $server_version -ge $(version_code 2.5.35) &&
+ $server_version -lt $(version_code 2.5.50) ]] ||
+ { skip "Need MDS version at least 2.6.93 or 2.5.35"; return; }
rm -rf $DIR/$tdir
- mkdir -p $DIR/$tdir
- chmod 0771 $DIR/$tdir
- chgrp $ID0 $DIR/$tdir
- $RUNAS -u $ID0 ls $DIR/$tdir || error "setgroups (1)"
- if [ "$CLIENT_TYPE" = "local" ]; then
- do_facet $SINGLEMDS "echo '* $ID1 setgrp' > $PERM_CONF"
- do_facet $SINGLEMDS "lctl set_param -n $IDENTITY_FLUSH=-1"
- $RUNAS -u $ID1 -G1,2,$ID0 ls $DIR/$tdir || error "setgroups (2)"
- fi
- $RUNAS -u $ID1 -G1,2 ls $DIR/$tdir && error "setgroups (3)"
+ mkdir -p $DIR/$tdir
+ chmod 0771 $DIR/$tdir
+ chgrp $ID0 $DIR/$tdir
+ $RUNAS_CMD -u $ID0 ls $DIR/$tdir || error "setgroups (1)"
+ do_facet $SINGLEMDS "echo '* $ID1 setgrp' > $PERM_CONF"
+ do_facet $SINGLEMDS "lctl set_param -n $IDENTITY_FLUSH=-1"
+ $RUNAS_CMD -u $ID1 -G1,2,$ID0 ls $DIR/$tdir ||
+ error "setgroups (2)"
+ $RUNAS_CMD -u $ID1 -G1,2 ls $DIR/$tdir && error "setgroups (3)"
rm -rf $DIR/$tdir
do_facet $SINGLEMDS "rm -f $PERM_CONF"
}
run_test 4 "set supplementary group ==============="
-mds_capability_timeout() {
- [ $# -lt 1 ] && echo "Miss mds capability timeout value" && return 1
-
- echo "Set mds capability timeout as $1 seconds"
- do_facet $SINGLEMDS "lctl set_param -n $CAPA_TIMEOUT=$1"
- return 0
-}
-
-mds_sec_level_switch() {
- [ $# -lt 1 ] && echo "Miss mds sec level switch value" && return 1
-
- case $1 in
- 0) echo "Disable capa for all clients";;
- 1) echo "Enable capa for remote client";;
- 3) echo "Enable capa for all clients";;
- *) echo "Invalid mds sec level switch value" && return 2;;
- esac
-
- do_facet $SINGLEMDS "lctl set_param -n $MDSSECLEVEL=$1"
- return 0
-}
-
-oss_sec_level_switch() {
- [ $# -lt 1 ] && echo "Miss oss sec level switch value" && return 1
-
- case $1 in
- 0) echo "Disable capa for all clients";;
- 1) echo "Enable capa for remote client";;
- 3) echo "Enable capa for all clients";;
- *) echo "Invalid oss sec level switch value" && return 2;;
- esac
-
- for i in `seq $OSTCOUNT`; do
- local j=`expr $i - 1`
- local OST="`do_facet ost$i "lctl get_param -N obdfilter.\*OST\*$j/stats 2>/dev/null | cut -d"." -f2" || true`"
- [ -z "$OST" ] && return 3
- do_facet ost$i "lctl set_param -n obdfilter.$OST.sec_level=$1"
- done
- return 0
-}
-
-mds_capability_switch() {
- [ $# -lt 1 ] && echo "Miss mds capability switch value" && return 1
-
- case $1 in
- 0) echo "Turn off mds capability";;
- 3) echo "Turn on mds capability";;
- *) echo "Invalid mds capability switch value" && return 2;;
- esac
-
- do_facet $SINGLEMDS "lctl set_param -n $MDSCAPA=$1"
- return 0
-}
-
-oss_capability_switch() {
- [ $# -lt 1 ] && echo "Miss oss capability switch value" && return 1
-
- case $1 in
- 0) echo "Turn off oss capability";;
- 1) echo "Turn on oss capability";;
- *) echo "Invalid oss capability switch value" && return 2;;
- esac
-
- for i in `seq $OSTCOUNT`; do
- local j=`expr $i - 1`
- local OST="`do_facet ost$i "lctl get_param -N obdfilter.\*OST\*$j/stats 2>/dev/null | cut -d"." -f2" || true`"
- [ -z "$OST" ] && return 3
- do_facet ost$i "lctl set_param -n obdfilter.$OST.capa=$1"
- done
- return 0
-}
-
-turn_mds_capa_on() {
- mds_capability_switch 3 || return 1
- mds_sec_level_switch 3 || return 2
- return 0
-}
-
-turn_oss_capa_on() {
- oss_capability_switch 1 || return 1
- oss_sec_level_switch 3 || return 2
- return 0
-}
-
-turn_capability_on() {
- local capa_timeout=${1:-"1800"}
-
- # To turn on fid capability for the system,
- # there is a requirement that fid capability
- # is turned on on all MDS/OSS servers before
- # client mount.
-
- turn_mds_capa_on || return 1
- turn_oss_capa_on || return 2
- mds_capability_timeout $capa_timeout || return 3
- remount_client $MOUNT || return 4
- return 0
-}
-
-turn_mds_capa_off() {
- mds_sec_level_switch 0 || return 1
- mds_capability_switch 0 || return 2
- return 0
-}
-
-turn_oss_capa_off() {
- oss_sec_level_switch 0 || return 1
- oss_capability_switch 0 || return 2
- return 0
-}
-
-turn_capability_off() {
- # to turn off fid capability, you can just do
- # it in a live system. But, please turn off
- # capability of all OSS servers before MDS servers.
-
- turn_oss_capa_off || return 1
- turn_mds_capa_off || return 2
- return 0
-}
-
-# We demonstrate that access to the objects in the filesystem are not
-# accessible without supplying secrets from the MDS by disabling a
-# proc variable on the mds so that it does not supply secrets. We then
-# try and access objects which result in failure.
-test_5() {
- local file=$DIR/f5
-
- [ $GSS_SUP = 0 ] && skip "without GSS support." && return
- if ! remote_mds; then
- skip "client should be separated from server."
- return
- fi
-
- rm -f $file
-
- turn_capability_off
- if [ $? != 0 ]; then
- error "turn_capability_off"
- return 1
- fi
-
- turn_oss_capa_on
- if [ $? != 0 ]; then
- error "turn_oss_capa_on"
- return 2
- fi
-
- if [ "$CLIENT_TYPE" = "remote" ]; then
- remount_client $MOUNT && return 3
- turn_oss_capa_off
- return 0
- else
- remount_client $MOUNT || return 4
- fi
-
- # proc variable disabled -- access to the objects in the filesystem
- # is not allowed
- echo "Should get Write error here : (proc variable are disabled "\
- "-- access to the objects in the filesystem is denied."
- $WTL $file 30
- if [ $? == 0 ]; then
- error "Write worked well even though secrets not supplied."
- return 5
- fi
-
- turn_capability_on
- if [ $? != 0 ]; then
- error "turn_capability_on"
- return 6
- fi
-
- sleep 5
-
- # proc variable enabled, secrets supplied -- write should work now
- echo "Should not fail here : (proc variable enabled, secrets supplied "\
- "-- write should work now)."
- $WTL $file 30
- if [ $? != 0 ]; then
- error "Write failed even though secrets supplied."
- return 7
- fi
-
- turn_capability_off
- if [ $? != 0 ]; then
- error "turn_capability_off"
- return 8
- fi
- rm -f $file
-}
-run_test 5 "capa secrets ========================="
-
-# Expiry: A test program is performing I/O on a file. It has credential
-# with an expiry half a minute later. While the program is running the
-# credentials expire and no automatic extensions or renewals are
-# enabled. The program will demonstrate an I/O failure.
-test_6() {
- local file=$DIR/f6
-
- [ $GSS_SUP = 0 ] && skip "without GSS support." && return
- if ! remote_mds; then
- skip "client should be separated from server."
- return
- fi
-
- turn_capability_off
- if [ $? != 0 ]; then
- error "turn_capability_off"
- return 1
- fi
-
- rm -f $file
-
- turn_capability_on 30
- if [ $? != 0 ]; then
- error "turn_capability_on 30"
- return 2
- fi
-
- # Token expiry
- $WTL $file 60
- if [ $? != 0 ]; then
- error "$WTL $file 60"
- return 3
- fi
-
- # Reset MDS capability timeout
- mds_capability_timeout 30
- if [ $? != 0 ]; then
- error "mds_capability_timeout 30"
- return 4
- fi
-
- $WTL $file 60 &
- local PID=$!
- sleep 5
-
- # To disable automatic renew, only need turn capa off on MDS.
- turn_mds_capa_off
- if [ $? != 0 ]; then
- error "turn_mds_capa_off"
- return 5
- fi
-
- echo "We expect I/O failure."
- wait $PID
- if [ $? == 0 ]; then
- echo "no I/O failure got."
- return 6
- fi
-
- turn_capability_off
- if [ $? != 0 ]; then
- error "turn_capability_off"
- return 7
- fi
- rm -f $file
-}
-run_test 6 "capa expiry ========================="
-
create_nodemaps() {
local i
local out
local rc
+ squash_id default 99 0
+ squash_id default 99 1
for (( i = 0; i < NODEMAP_COUNT; i++ )); do
- if ! do_facet mgs $LCTL nodemap_add \
- ${HOSTNAME_CHECKSUM}_${i}; then
+ local csum=${HOSTNAME_CHECKSUM}_${i}
+
+ if ! do_facet mgs $LCTL nodemap_add $csum; then
return 1
fi
- out=$(do_facet mgs $LCTL get_param \
- nodemap.${HOSTNAME_CHECKSUM}_${i}.id)
+
+ out=$(do_facet mgs $LCTL get_param nodemap.$csum.id)
## This needs to return zero if the following statement is 1
- rc=$(echo $out | grep -c ${HOSTNAME_CHECKSUM}_${i})
- [[ $rc == 0 ]] && return 1
+ [[ $(echo $out | grep -c $csum) == 0 ]] && return 1
done
return 0
}
delete_nodemaps() {
local i
local out
- local rc
for ((i = 0; i < NODEMAP_COUNT; i++)); do
- if ! do_facet mgs $LCTL nodemap_del \
- ${HOSTNAME_CHECKSUM}_${i}; then
- error "nodemap_del ${HOSTNAME_CHECKSUM}_${i} \
- failed with $rc"
+ local csum=${HOSTNAME_CHECKSUM}_${i}
+
+ if ! do_facet mgs $LCTL nodemap_del $csum; then
+ error "nodemap_del $csum failed with $?"
return 3
fi
- out=$(do_facet mgs $LCTL get_param \
- nodemap.${HOSTNAME_CHECKSUM}_${i}.id)
- rc=$(echo $out | grep -c ${HOSTNAME_CHECKSUM}_${i})
- [[ $rc != 0 ]] && return 1
+
+ out=$(do_facet mgs $LCTL get_param nodemap.$csum.id)
+ [[ $(echo $out | grep -c $csum) != 0 ]] && return 1
done
return 0
}
for ((j = 0; j < NODEMAP_RANGE_COUNT; j++)); do
range="$SUBNET_CHECKSUM.${2}.${j}.[1-253]@tcp"
- if ! do_facet mgs $cmd --name $1 \
- --range $range; then
- rc=$(($rc + 1))
+ if ! do_facet mgs $cmd --name $1 --range $range; then
+ rc=$((rc + 1))
fi
done
return $rc
for ((j = 0; j < NODEMAP_RANGE_COUNT; j++)); do
range="$SUBNET_CHECKSUM.${2}.${j}.[1-253]@tcp"
- if ! do_facet mgs $cmd --name $1 \
- --range $range; then
- rc=$(($rc + 1))
+ if ! do_facet mgs $cmd --name $1 --range $range; then
+ rc=$((rc + 1))
fi
done
add_idmaps() {
local i
- local j
- local client_id
- local fs_id
local cmd="$LCTL nodemap_add_idmap"
local rc=0
for ((i = 0; i < NODEMAP_COUNT; i++)); do
+ local j
+
for ((j = 500; j < NODEMAP_MAX_ID; j++)); do
- client_id=$j
- fs_id=$(($j + 1))
- if ! do_facet mgs $cmd \
- --name ${HOSTNAME_CHECKSUM}_${i} \
- --idtype uid --idmap $client_id:$fs_id; then
- rc=$(($rc + 1))
+ local csum=${HOSTNAME_CHECKSUM}_${i}
+ local client_id=$j
+ local fs_id=$((j + 1))
+
+ if ! do_facet mgs $cmd --name $csum --idtype uid \
+ --idmap $client_id:$fs_id; then
+ rc=$((rc + 1))
fi
- if ! do_facet mgs $cmd \
- --name ${HOSTNAME_CHECKSUM}_${i} \
- --idtype gid --idmap $client_id:$fs_id; then
- rc=$(($rc + 1))
+ if ! do_facet mgs $cmd --name $csum --idtype gid \
+ --idmap $client_id:$fs_id; then
+ rc=$((rc + 1))
fi
done
done
delete_idmaps() {
local i
- local j
- local client_id
- local fs_id
local cmd="$LCTL nodemap_del_idmap"
local rc=0
for ((i = 0; i < NODEMAP_COUNT; i++)); do
+ local j
+
for ((j = 500; j < NODEMAP_MAX_ID; j++)); do
- client_id=$j
- fs_id=$(($j + 1))
- if ! do_facet mgs $cmd \
- --name ${HOSTNAME_CHECKSUM}_${i} \
- --idtype uid --idmap $client_id:$fs_id; then
- rc=$(($rc + 1))
+ local csum=${HOSTNAME_CHECKSUM}_${i}
+ local client_id=$j
+ local fs_id=$((j + 1))
+
+ if ! do_facet mgs $cmd --name $csum --idtype uid \
+ --idmap $client_id:$fs_id; then
+ rc=$((rc + 1))
fi
- if ! do_facet mgs $cmd \
- --name ${HOSTNAME_CHECKSUM}_${i} \
- --idtype gid --idmap $client_id:$fs_id; then
- rc=$(($rc + 1))
+ if ! do_facet mgs $cmd --name $csum --idtype gid \
+ --idmap $client_id:$fs_id; then
+ rc=$((rc + 1))
fi
done
done
option[1]="trusted"
for ((idx = 0; idx < 2; idx++)); do
- if ! do_facet mgs $cmd --name $1 \
- --property ${option[$idx]} \
- --value 1; then
+ if ! do_facet mgs $cmd --name $1 --property ${option[$idx]} \
+ --value 1; then
rc=$((rc + 1))
fi
- if ! do_facet mgs $cmd --name $1 \
- --property ${option[$idx]} \
- --value 0; then
+ if ! do_facet mgs $cmd --name $1 --property ${option[$idx]} \
+ --value 0; then
rc=$((rc + 1))
fi
done
}
squash_id() {
+ [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
+ return
local cmd
cmd[0]="$LCTL nodemap_modify --property squash_uid"
fi
}
+# ensure that the squash defaults are the expected defaults
+squash_id default 99 0
+squash_id default 99 1
+
test_nid() {
local cmd
test_idmap() {
local i
- local j
- local fs_id
local cmd="$LCTL nodemap_test_id"
local rc=0
## nodemap deactivated
- if ! do_facet mgs lctl nodemap_activate 0; then
+ if ! do_facet mgs $LCTL nodemap_activate 0; then
return 1
fi
for ((id = 500; id < NODEMAP_MAX_ID; id++)); do
+ local j
+
for ((j = 0; j < NODEMAP_RANGE_COUNT; j++)); do
- nid="$SUBNET_CHECKSUM.0.${j}.100@tcp"
- fs_id=$(do_facet mgs $cmd --nid $nid \
- --idtype uid --id $id)
+ local nid="$SUBNET_CHECKSUM.0.${j}.100@tcp"
+ local fs_id=$(do_facet mgs $cmd --nid $nid \
+ --idtype uid --id $id)
if [ $fs_id != $id ]; then
+ echo "expected $id, got $fs_id"
rc=$((rc + 1))
fi
done
done
## nodemap activated
- if ! do_facet mgs lctl nodemap_activate 1; then
+ if ! do_facet mgs $LCTL nodemap_activate 1; then
return 2
fi
--idtype uid --id $id)
expected_id=$((id + 1))
if [ $fs_id != $expected_id ]; then
+ echo "expected $expected_id, got $fs_id"
rc=$((rc + 1))
fi
done
## trust client ids
for ((i = 0; i < NODEMAP_COUNT; i++)); do
- if ! do_facet mgs $LCTL nodemap_modify \
- --name ${HOSTNAME_CHECKSUM}_${i} \
- --property trusted --value 1; then
- error "nodemap_modify ${HOSTNAME_CHECKSUM}_${i} "
- "failed with $rc"
+ local csum=${HOSTNAME_CHECKSUM}_${i}
+
+ if ! do_facet mgs $LCTL nodemap_modify --name $csum \
+ --property trusted --value 1; then
+ error "nodemap_modify $csum failed with $?"
return 3
fi
done
nid="$SUBNET_CHECKSUM.0.${j}.100@tcp"
fs_id=$(do_facet mgs $cmd --nid $nid \
--idtype uid --id $id)
- expected_id=$((id + 1))
if [ $fs_id != $id ]; then
+ echo "expected $id, got $fs_id"
rc=$((rc + 1))
fi
done
## ensure allow_root_access is enabled
for ((i = 0; i < NODEMAP_COUNT; i++)); do
- if ! do_facet mgs $LCTL nodemap_modify \
- --name ${HOSTNAME_CHECKSUM}_${i} \
- --property admin --value 1; then
- error "nodemap_modify ${HOSTNAME_CHECKSUM}_${i} "
- "failed with $rc"
+ local csum=${HOSTNAME_CHECKSUM}_${i}
+
+ if ! do_facet mgs $LCTL nodemap_modify --name $csum \
+ --property admin --value 1; then
+ error "nodemap_modify $csum failed with $?"
return 3
fi
done
- ## check that root is mapped to 99
+ ## check that root allowed
for ((j = 0; j < NODEMAP_RANGE_COUNT; j++)); do
nid="$SUBNET_CHECKSUM.0.${j}.100@tcp"
fs_id=$(do_facet mgs $cmd --nid $nid --idtype uid --id 0)
- expected_id=$((id + 1))
if [ $fs_id != 0 ]; then
+ echo "root allowed expected 0, got $fs_id"
rc=$((rc + 1))
fi
done
## ensure allow_root_access is disabled
for ((i = 0; i < NODEMAP_COUNT; i++)); do
- if ! do_facet mgs $LCTL nodemap_modify \
- --name ${HOSTNAME_CHECKSUM}_${i} \
+ local csum=${HOSTNAME_CHECKSUM}_${i}
+
+ if ! do_facet mgs $LCTL nodemap_modify --name $csum \
--property admin --value 0; then
error "nodemap_modify ${HOSTNAME_CHECKSUM}_${i} "
"failed with $rc"
fi
done
- ## check that root allowed
+ ## check that root is mapped to 99
for ((j = 0; j < NODEMAP_RANGE_COUNT; j++)); do
nid="$SUBNET_CHECKSUM.0.${j}.100@tcp"
fs_id=$(do_facet mgs $cmd --nid $nid --idtype uid --id 0)
- expected_id=$((id + 1))
if [ $fs_id != 99 ]; then
+ error "root squash expected 99, got $fs_id"
rc=$((rc + 1))
fi
done
local rc
remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- [ $(lustre_version_code $SINGLEMGS) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(get_lustre_version) MGS, need 2.5.53+" &&
+ [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
return
create_nodemaps
delete_nodemaps
rc=$?
- [[ $rc != 0 ]] && error "nodemap_add failed with $rc" && return 2
+ [[ $rc != 0 ]] && error "nodemap_del failed with $rc" && return 2
return 0
}
local rc
remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- [ $(lustre_version_code $SINGLEMGS) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(get_lustre_version) MGS, need 2.5.53+" &&
+ [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
return
# Set up nodemaps
# Clean up
delete_nodemaps
rc=$?
- [[ $rc != 0 ]] && error "nodemap_add failed with $rc" && return 3
+ [[ $rc != 0 ]] && error "nodemap_del failed with $rc" && return 3
return 0
}
local rc
remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- [ $(lustre_version_code $SINGLEMGS) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(get_lustre_version) MGS, need 2.5.53+" &&
+ [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
return
rc=0
rc=0
delete_nodemaps
rc=$?
- [[ $rc != 0 ]] && error "nodemap_add failed with $rc" && return 4
+ [[ $rc != 0 ]] && error "nodemap_del failed with $rc" && return 4
return 0
}
run_test 9 "nodemap range add"
-test_10() {
+test_10a() {
local rc
remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- [ $(lustre_version_code $SINGLEMGS) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(get_lustre_version) MGS, need 2.5.53+" &&
+ [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
return
rc=0
delete_nodemaps
rc=$?
- [[ $rc != 0 ]] && error "nodemap_add failed with $rc" && return 5
+ [[ $rc != 0 ]] && error "nodemap_del failed with $rc" && return 5
return 0
}
-run_test 10 "nodemap reject duplicate ranges"
+run_test 10a "nodemap reject duplicate ranges"
+
+test_10b() {
+ [ $(lustre_version_code mgs) -lt $(version_code 2.10.53) ] &&
+ skip "Need MGS >= 2.10.53" && return
+
+ local nm1="nodemap1"
+ local nm2="nodemap2"
+ local nids="192.168.19.[0-255]@o2ib20"
+
+ do_facet mgs $LCTL nodemap_del $nm1 2>/dev/null
+ do_facet mgs $LCTL nodemap_del $nm2 2>/dev/null
+
+ do_facet mgs $LCTL nodemap_add $nm1 || error "Add $nm1 failed"
+ do_facet mgs $LCTL nodemap_add $nm2 || error "Add $nm2 failed"
+ do_facet mgs $LCTL nodemap_add_range --name $nm1 --range $nids ||
+ error "Add range $nids to $nm1 failed"
+ [ -n "$(do_facet mgs $LCTL get_param nodemap.$nm1.* |
+ grep start_nid)" ] || error "No range was found"
+ do_facet mgs $LCTL nodemap_del_range --name $nm2 --range $nids &&
+ error "Deleting range $nids from $nm2 should fail"
+ [ -n "$(do_facet mgs $LCTL get_param nodemap.$nm1.* |
+ grep start_nid)" ] || error "Range $nids should be there"
+
+ do_facet mgs $LCTL nodemap_del $nm1 || error "Delete $nm1 failed"
+ do_facet mgs $LCTL nodemap_del $nm2 || error "Delete $nm2 failed"
+ return 0
+}
+run_test 10b "delete range from the correct nodemap"
test_11() {
local rc
remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- [ $(lustre_version_code $SINGLEMGS) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(get_lustre_version) MGS, need 2.5.53+" &&
+ [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
return
rc=0
local rc
remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- [ $(lustre_version_code $SINGLEMGS) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(get_lustre_version) MGS, need 2.5.53+" &&
+ [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
return
rc=0
local rc
remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- [ $(lustre_version_code $SINGLEMGS) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(get_lustre_version) MGS, need 2.5.53+" &&
+ [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
return
rc=0
rc=0
for ((i = 0; i < NODEMAP_COUNT; i++)); do
for ((j = 0; j < NODEMAP_RANGE_COUNT; j++)); do
- for ((k = 1; k < 253; k++)); do
+ for k in $NODEMAP_IPADDR_LIST; do
if ! test_nid $SUBNET_CHECKSUM.$i.$j.$k \
${HOSTNAME_CHECKSUM}_${i}; then
rc=$((rc + 1))
local rc
remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- [ $(lustre_version_code $SINGLEMGS) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(get_lustre_version) MGS, need 2.5.53+" &&
+ [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
return
rc=0
rc=0
for ((i = 0; i < NODEMAP_COUNT; i++)); do
for ((j = 0; j < NODEMAP_RANGE_COUNT; j++)); do
- for ((k = 1; k < 253; k++)); do
+ for k in $NODEMAP_IPADDR_LIST; do
if ! test_nid $SUBNET_CHECKSUM.$i.$j.$k \
default; then
rc=$((rc + 1))
local rc
remote_mgs_nodsh && skip "remote MGS with nodsh" && return
- [ $(lustre_version_code $SINGLEMGS) -lt $(version_code 2.5.53) ] &&
- skip "No nodemap on $(get_lustre_version) MGS, need 2.5.53+" &&
+ [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
return
rc=0
}
run_test 15 "test id mapping"
+wait_nm_sync() {
+ local nodemap_name=$1
+ local key=$2
+ local value=$3
+ local proc_param="${nodemap_name}.${key}"
+ [ "$nodemap_name" == "active" ] && proc_param="active"
+
+ local is_active=$(do_facet mgs $LCTL get_param -n nodemap.active)
+ (( is_active == 0 )) && [ "$proc_param" != "active" ] && return
+
+ local max_retries=20
+ local is_sync
+ local out1=""
+ local out2
+ local mgs_ip=$(host_nids_address $mgs_HOST $NETTYPE | cut -d' ' -f1)
+ local i
+
+ if [ -z "$value" ]; then
+ out1=$(do_facet mgs $LCTL get_param nodemap.${proc_param})
+ echo "On MGS ${mgs_ip}, ${proc_param} = $out1"
+ else
+ out1=$value;
+ fi
+
+ # wait up to 10 seconds for other servers to sync with mgs
+ for i in $(seq 1 10); do
+ for node in $(all_server_nodes); do
+ local node_ip=$(host_nids_address $node $NETTYPE |
+ cut -d' ' -f1)
+
+ is_sync=true
+ if [ -z "$value" ]; then
+ [ $node_ip == $mgs_ip ] && continue
+ fi
+
+ out2=$(do_node $node_ip $LCTL get_param \
+ nodemap.$proc_param 2>/dev/null)
+ echo "On $node ${node_ip}, ${proc_param} = $out2"
+ [ "$out1" != "$out2" ] && is_sync=false && break
+ done
+ $is_sync && break
+ sleep 1
+ done
+ if ! $is_sync; then
+ echo MGS
+ echo $out1
+ echo OTHER - IP: $node_ip
+ echo $out2
+ error "mgs and $nodemap_name ${key} mismatch, $i attempts"
+ fi
+ echo "waited $((i - 1)) seconds for sync"
+}
+
+create_fops_nodemaps() {
+ local i=0
+ local client
+ for client in $clients; do
+ local client_ip=$(host_nids_address $client $NETTYPE)
+ local client_nid=$(h2nettype $client_ip)
+ do_facet mgs $LCTL nodemap_add c${i} || return 1
+ do_facet mgs $LCTL nodemap_add_range \
+ --name c${i} --range $client_nid || return 1
+ for map in ${FOPS_IDMAPS[i]}; do
+ do_facet mgs $LCTL nodemap_add_idmap --name c${i} \
+ --idtype uid --idmap ${map} || return 1
+ do_facet mgs $LCTL nodemap_add_idmap --name c${i} \
+ --idtype gid --idmap ${map} || return 1
+ done
+
+ wait_nm_sync c$i idmap
+
+ i=$((i + 1))
+ done
+ return 0
+}
+
+delete_fops_nodemaps() {
+ local i=0
+ local client
+ for client in $clients; do
+ do_facet mgs $LCTL nodemap_del c${i} || return 1
+ i=$((i + 1))
+ done
+ return 0
+}
+
+fops_mds_index=0
+nm_test_mkdir() {
+ if [ $MDSCOUNT -le 1 ]; then
+ do_node ${clients_arr[0]} mkdir -p $DIR/$tdir
+ else
+ # round-robin MDTs to test DNE nodemap support
+ [ ! -d $DIR ] && do_node ${clients_arr[0]} mkdir -p $DIR
+ do_node ${clients_arr[0]} $LFS setdirstripe -c 1 -i \
+ $((fops_mds_index % MDSCOUNT)) $DIR/$tdir
+ ((fops_mds_index++))
+ fi
+}
+
+# acl test directory needs to be initialized on a privileged client
+fops_test_setup() {
+ local admin=$(do_facet mgs $LCTL get_param -n nodemap.c0.admin_nodemap)
+ local trust=$(do_facet mgs $LCTL get_param -n \
+ nodemap.c0.trusted_nodemap)
+
+ do_facet mgs $LCTL nodemap_modify --name c0 --property admin --value 1
+ do_facet mgs $LCTL nodemap_modify --name c0 --property trusted --value 1
+
+ wait_nm_sync c0 admin_nodemap
+ wait_nm_sync c0 trusted_nodemap
+
+ do_node ${clients_arr[0]} rm -rf $DIR/$tdir
+ nm_test_mkdir
+ do_node ${clients_arr[0]} chown $user $DIR/$tdir
+
+ do_facet mgs $LCTL nodemap_modify --name c0 \
+ --property admin --value $admin
+ do_facet mgs $LCTL nodemap_modify --name c0 \
+ --property trusted --value $trust
+
+ # flush MDT locks to make sure they are reacquired before test
+ do_node ${clients_arr[0]} $LCTL set_param \
+ ldlm.namespaces.$FSNAME-MDT*.lru_size=clear
+
+ wait_nm_sync c0 admin_nodemap
+ wait_nm_sync c0 trusted_nodemap
+}
+
+# fileset test directory needs to be initialized on a privileged client
+fileset_test_setup() {
+ local admin=$(do_facet mgs $LCTL get_param -n nodemap.c0.admin_nodemap)
+ local trust=$(do_facet mgs $LCTL get_param -n \
+ nodemap.c0.trusted_nodemap)
+
+ do_facet mgs $LCTL nodemap_modify --name c0 --property admin --value 1
+ do_facet mgs $LCTL nodemap_modify --name c0 --property trusted --value 1
+
+ wait_nm_sync c0 admin_nodemap
+ wait_nm_sync c0 trusted_nodemap
+
+ # create directory and populate it for subdir mount
+ do_node ${clients_arr[0]} mkdir $MOUNT/$subdir ||
+ error "unable to create dir $MOUNT/$subdir"
+ do_node ${clients_arr[0]} touch $MOUNT/$subdir/this_is_$subdir ||
+ error "unable to create file $MOUNT/$subdir/this_is_$subdir"
+ do_node ${clients_arr[0]} mkdir $MOUNT/$subdir/$subsubdir ||
+ error "unable to create dir $MOUNT/$subdir/$subsubdir"
+ do_node ${clients_arr[0]} touch \
+ $MOUNT/$subdir/$subsubdir/this_is_$subsubdir ||
+ error "unable to create file \
+ $MOUNT/$subdir/$subsubdir/this_is_$subsubdir"
+
+ do_facet mgs $LCTL nodemap_modify --name c0 \
+ --property admin --value $admin
+ do_facet mgs $LCTL nodemap_modify --name c0 \
+ --property trusted --value $trust
+
+ # flush MDT locks to make sure they are reacquired before test
+ do_node ${clients_arr[0]} $LCTL set_param \
+ ldlm.namespaces.$FSNAME-MDT*.lru_size=clear
+
+ wait_nm_sync c0 admin_nodemap
+ wait_nm_sync c0 trusted_nodemap
+}
+
+# fileset test directory needs to be initialized on a privileged client
+fileset_test_cleanup() {
+ local admin=$(do_facet mgs $LCTL get_param -n nodemap.c0.admin_nodemap)
+ local trust=$(do_facet mgs $LCTL get_param -n \
+ nodemap.c0.trusted_nodemap)
+
+ do_facet mgs $LCTL nodemap_modify --name c0 --property admin --value 1
+ do_facet mgs $LCTL nodemap_modify --name c0 --property trusted --value 1
+
+ wait_nm_sync c0 admin_nodemap
+ wait_nm_sync c0 trusted_nodemap
+
+ # cleanup directory created for subdir mount
+ do_node ${clients_arr[0]} rm -rf $MOUNT/$subdir ||
+ error "unable to remove dir $MOUNT/$subdir"
+
+ do_facet mgs $LCTL nodemap_modify --name c0 \
+ --property admin --value $admin
+ do_facet mgs $LCTL nodemap_modify --name c0 \
+ --property trusted --value $trust
+
+ # flush MDT locks to make sure they are reacquired before test
+ do_node ${clients_arr[0]} $LCTL set_param \
+ ldlm.namespaces.$FSNAME-MDT*.lru_size=clear
+
+ wait_nm_sync c0 admin_nodemap
+ wait_nm_sync c0 trusted_nodemap
+}
+
+do_create_delete() {
+ local run_u=$1
+ local key=$2
+ local testfile=$DIR/$tdir/$tfile
+ local rc=0
+ local c=0 d=0
+ local qused_new
+ if $run_u touch $testfile >& /dev/null; then
+ c=1
+ $run_u rm $testfile && d=1
+ fi >& /dev/null
+
+ local res="$c $d"
+ local expected=$(get_cr_del_expected $key)
+ [ "$res" != "$expected" ] &&
+ error "test $key, wanted $expected, got $res" && rc=$((rc + 1))
+ return $rc
+}
+
+nodemap_check_quota() {
+ local run_u="$1"
+ $run_u lfs quota -q $DIR | awk '{ print $2; exit; }'
+}
+
+do_fops_quota_test() {
+ local run_u=$1
+ # fuzz quota used to account for possible indirect blocks, etc
+ local quota_fuzz=$(fs_log_size)
+ local qused_orig=$(nodemap_check_quota "$run_u")
+ local qused_high=$((qused_orig + quota_fuzz))
+ local qused_low=$((qused_orig - quota_fuzz))
+ local testfile=$DIR/$tdir/$tfile
+ $run_u dd if=/dev/zero of=$testfile oflag=sync bs=1M count=1 \
+ >& /dev/null || error "unable to write quota test file"
+ sync; sync_all_data || true
+
+ local qused_new=$(nodemap_check_quota "$run_u")
+ [ $((qused_new)) -lt $((qused_low + 1024)) -o \
+ $((qused_new)) -gt $((qused_high + 1024)) ] &&
+ error "$qused_new != $qused_orig + 1M after write, " \
+ "fuzz is $quota_fuzz"
+ $run_u rm $testfile || error "unable to remove quota test file"
+ wait_delete_completed_mds
+
+ qused_new=$(nodemap_check_quota "$run_u")
+ [ $((qused_new)) -lt $((qused_low)) \
+ -o $((qused_new)) -gt $((qused_high)) ] &&
+ error "quota not reclaimed, expect $qused_orig, " \
+ "got $qused_new, fuzz $quota_fuzz"
+}
+
+get_fops_mapped_user() {
+ local cli_user=$1
+
+ for ((i=0; i < ${#FOPS_IDMAPS[@]}; i++)); do
+ for map in ${FOPS_IDMAPS[i]}; do
+ if [ $(cut -d: -f1 <<< "$map") == $cli_user ]; then
+ cut -d: -f2 <<< "$map"
+ return
+ fi
+ done
+ done
+ echo -1
+}
+
+get_cr_del_expected() {
+ local -a key
+ IFS=":" read -a key <<< "$1"
+ local mapmode="${key[0]}"
+ local mds_user="${key[1]}"
+ local cluster="${key[2]}"
+ local cli_user="${key[3]}"
+ local mode="0${key[4]}"
+ local SUCCESS="1 1"
+ local FAILURE="0 0"
+ local noadmin=0
+ local mapped=0
+ local other=0
+
+ [[ $mapmode == *mapped* ]] && mapped=1
+ # only c1 is mapped in these test cases
+ [[ $mapmode == mapped_trusted* ]] && [ "$cluster" == "c0" ] && mapped=0
+ [[ $mapmode == *noadmin* ]] && noadmin=1
+
+ # o+wx works as long as the user isn't mapped
+ if [ $((mode & 3)) -eq 3 ]; then
+ other=1
+ fi
+
+ # if client user is root, check if root is squashed
+ if [ "$cli_user" == "0" ]; then
+ # squash root succeed, if other bit is on
+ case $noadmin in
+ 0) echo $SUCCESS;;
+ 1) [ "$other" == "1" ] && echo $SUCCESS
+ [ "$other" == "0" ] && echo $FAILURE;;
+ esac
+ return
+ fi
+ if [ "$mapped" == "0" ]; then
+ [ "$other" == "1" ] && echo $SUCCESS
+ [ "$other" == "0" ] && echo $FAILURE
+ return
+ fi
+
+ # if mapped user is mds user, check for u+wx
+ mapped_user=$(get_fops_mapped_user $cli_user)
+ [ "$mapped_user" == "-1" ] &&
+ error "unable to find mapping for client user $cli_user"
+
+ if [ "$mapped_user" == "$mds_user" -a \
+ $(((mode & 0300) == 0300)) -eq 1 ]; then
+ echo $SUCCESS
+ return
+ fi
+ if [ "$mapped_user" != "$mds_user" -a "$other" == "1" ]; then
+ echo $SUCCESS
+ return
+ fi
+ echo $FAILURE
+}
+
+test_fops_admin_cli_i=""
+test_fops_chmod_dir() {
+ local current_cli_i=$1
+ local perm_bits=$2
+ local dir_to_chmod=$3
+ local new_admin_cli_i=""
+
+ # do we need to set up a new admin client?
+ [ "$current_cli_i" == "0" ] && [ "$test_fops_admin_cli_i" != "1" ] &&
+ new_admin_cli_i=1
+ [ "$current_cli_i" != "0" ] && [ "$test_fops_admin_cli_i" != "0" ] &&
+ new_admin_cli_i=0
+
+ # if only one client, and non-admin, need to flip admin everytime
+ if [ "$num_clients" == "1" ]; then
+ test_fops_admin_client=$clients
+ test_fops_admin_val=$(do_facet mgs $LCTL get_param -n \
+ nodemap.c0.admin_nodemap)
+ if [ "$test_fops_admin_val" != "1" ]; then
+ do_facet mgs $LCTL nodemap_modify \
+ --name c0 \
+ --property admin \
+ --value 1
+ wait_nm_sync c0 admin_nodemap
+ fi
+ elif [ "$new_admin_cli_i" != "" ]; then
+ # restore admin val to old admin client
+ if [ "$test_fops_admin_cli_i" != "" ] &&
+ [ "$test_fops_admin_val" != "1" ]; then
+ do_facet mgs $LCTL nodemap_modify \
+ --name c${test_fops_admin_cli_i} \
+ --property admin \
+ --value $test_fops_admin_val
+ wait_nm_sync c${test_fops_admin_cli_i} admin_nodemap
+ fi
+
+ test_fops_admin_cli_i=$new_admin_cli_i
+ test_fops_admin_client=${clients_arr[$new_admin_cli_i]}
+ test_fops_admin_val=$(do_facet mgs $LCTL get_param -n \
+ nodemap.c${new_admin_cli_i}.admin_nodemap)
+
+ if [ "$test_fops_admin_val" != "1" ]; then
+ do_facet mgs $LCTL nodemap_modify \
+ --name c${new_admin_cli_i} \
+ --property admin \
+ --value 1
+ wait_nm_sync c${new_admin_cli_i} admin_nodemap
+ fi
+ fi
+
+ do_node $test_fops_admin_client chmod $perm_bits $DIR/$tdir || return 1
+
+ # remove admin for single client if originally non-admin
+ if [ "$num_clients" == "1" ] && [ "$test_fops_admin_val" != "1" ]; then
+ do_facet mgs $LCTL nodemap_modify --name c0 --property admin \
+ --value 0
+ wait_nm_sync c0 admin_nodemap
+ fi
+
+ return 0
+}
+
+test_fops() {
+ local mapmode="$1"
+ local single_client="$2"
+ local client_user_list=([0]="0 $((IDBASE+3)) $((IDBASE+4))"
+ [1]="0 $((IDBASE+5)) $((IDBASE+6))")
+ local mds_i
+ local rc=0
+ local perm_bit_list="0 3 $((0300)) $((0303))"
+ # SLOW tests 000-007, 010-070, 100-700 (octal modes)
+ [ "$SLOW" == "yes" ] &&
+ perm_bit_list="0 $(seq 1 7) $(seq 8 8 63) $(seq 64 64 511) \
+ $((0303))"
+
+ # step through mds users. -1 means root
+ for mds_i in -1 0 1 2; do
+ local user=$((mds_i + IDBASE))
+ local client
+ local x
+
+ [ "$mds_i" == "-1" ] && user=0
+
+ echo mkdir -p $DIR/$tdir
+ fops_test_setup
+ local cli_i=0
+ for client in $clients; do
+ local u
+ for u in ${client_user_list[$cli_i]}; do
+ local run_u="do_node $client \
+ $RUNAS_CMD -u$u -g$u -G$u"
+ for perm_bits in $perm_bit_list; do
+ local mode=$(printf %03o $perm_bits)
+ local key
+ key="$mapmode:$user:c$cli_i:$u:$mode"
+ test_fops_chmod_dir $cli_i $mode \
+ $DIR/$tdir ||
+ error cannot chmod $key
+ do_create_delete "$run_u" "$key"
+ done
+
+ # check quota
+ test_fops_chmod_dir $cli_i 777 $DIR/$tdir ||
+ error cannot chmod $key
+ do_fops_quota_test "$run_u"
+ done
+
+ cli_i=$((cli_i + 1))
+ [ "$single_client" == "1" ] && break
+ done
+ rm -rf $DIR/$tdir
+ done
+ return $rc
+}
+
+nodemap_version_check () {
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return 1
+ [ $(lustre_version_code mgs) -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $(lustre_build_version mgs) MGS < 2.5.53" &&
+ return 1
+ return 0
+}
+
+nodemap_test_setup() {
+ local rc
+ local active_nodemap=1
+
+ [ "$1" == "0" ] && active_nodemap=0
+
+ do_nodes $(comma_list $(all_mdts_nodes)) \
+ $LCTL set_param mdt.*.identity_upcall=NONE
+
+ rc=0
+ create_fops_nodemaps
+ rc=$?
+ [[ $rc != 0 ]] && error "adding fops nodemaps failed $rc"
+
+ do_facet mgs $LCTL nodemap_activate $active_nodemap
+ wait_nm_sync active
+
+ do_facet mgs $LCTL nodemap_modify --name default \
+ --property admin --value 1
+ do_facet mgs $LCTL nodemap_modify --name default \
+ --property trusted --value 1
+ wait_nm_sync default trusted_nodemap
+}
+
+nodemap_test_cleanup() {
+ trap 0
+ delete_fops_nodemaps
+ rc=$?
+ [[ $rc != 0 ]] && error "removing fops nodemaps failed $rc"
+
+ do_facet mgs $LCTL nodemap_modify --name default \
+ --property admin --value 0
+ do_facet mgs $LCTL nodemap_modify --name default \
+ --property trusted --value 0
+ wait_nm_sync default trusted_nodemap
+
+ do_facet mgs $LCTL nodemap_activate 0
+ wait_nm_sync active 0
+
+ export SK_UNIQUE_NM=false
+ return 0
+}
+
+nodemap_clients_admin_trusted() {
+ local admin=$1
+ local tr=$2
+ local i=0
+ for client in $clients; do
+ do_facet mgs $LCTL nodemap_modify --name c0 \
+ --property admin --value $admin
+ do_facet mgs $LCTL nodemap_modify --name c0 \
+ --property trusted --value $tr
+ i=$((i + 1))
+ done
+ wait_nm_sync c$((i - 1)) admin_nodemap
+ wait_nm_sync c$((i - 1)) trusted_nodemap
+}
+
+test_16() {
+ nodemap_version_check || return 0
+ nodemap_test_setup 0
+
+ trap nodemap_test_cleanup EXIT
+ test_fops all_off
+ nodemap_test_cleanup
+}
+run_test 16 "test nodemap all_off fileops"
+
+test_17() {
+ nodemap_version_check || return 0
+ nodemap_test_setup
+
+ trap nodemap_test_cleanup EXIT
+ nodemap_clients_admin_trusted 0 1
+ test_fops trusted_noadmin 1
+ nodemap_test_cleanup
+}
+run_test 17 "test nodemap trusted_noadmin fileops"
+
+test_18() {
+ nodemap_version_check || return 0
+ nodemap_test_setup
+
+ trap nodemap_test_cleanup EXIT
+ nodemap_clients_admin_trusted 0 0
+ test_fops mapped_noadmin 1
+ nodemap_test_cleanup
+}
+run_test 18 "test nodemap mapped_noadmin fileops"
+
+test_19() {
+ nodemap_version_check || return 0
+ nodemap_test_setup
+
+ trap nodemap_test_cleanup EXIT
+ nodemap_clients_admin_trusted 1 1
+ test_fops trusted_admin 1
+ nodemap_test_cleanup
+}
+run_test 19 "test nodemap trusted_admin fileops"
+
+test_20() {
+ nodemap_version_check || return 0
+ nodemap_test_setup
+
+ trap nodemap_test_cleanup EXIT
+ nodemap_clients_admin_trusted 1 0
+ test_fops mapped_admin 1
+ nodemap_test_cleanup
+}
+run_test 20 "test nodemap mapped_admin fileops"
+
+test_21() {
+ nodemap_version_check || return 0
+ nodemap_test_setup
+
+ trap nodemap_test_cleanup EXIT
+ local x=1
+ local i=0
+ for client in $clients; do
+ do_facet mgs $LCTL nodemap_modify --name c${i} \
+ --property admin --value 0
+ do_facet mgs $LCTL nodemap_modify --name c${i} \
+ --property trusted --value $x
+ x=0
+ i=$((i + 1))
+ done
+ wait_nm_sync c$((i - 1)) trusted_nodemap
+
+ test_fops mapped_trusted_noadmin
+ nodemap_test_cleanup
+}
+run_test 21 "test nodemap mapped_trusted_noadmin fileops"
+
+test_22() {
+ nodemap_version_check || return 0
+ nodemap_test_setup
+
+ trap nodemap_test_cleanup EXIT
+ local x=1
+ local i=0
+ for client in $clients; do
+ do_facet mgs $LCTL nodemap_modify --name c${i} \
+ --property admin --value 1
+ do_facet mgs $LCTL nodemap_modify --name c${i} \
+ --property trusted --value $x
+ x=0
+ i=$((i + 1))
+ done
+ wait_nm_sync c$((i - 1)) trusted_nodemap
+
+ test_fops mapped_trusted_admin
+ nodemap_test_cleanup
+}
+run_test 22 "test nodemap mapped_trusted_admin fileops"
+
+# acl test directory needs to be initialized on a privileged client
+nodemap_acl_test_setup() {
+ local admin=$(do_facet mgs $LCTL get_param -n nodemap.c0.admin_nodemap)
+ local trust=$(do_facet mgs $LCTL get_param -n \
+ nodemap.c0.trusted_nodemap)
+
+ do_facet mgs $LCTL nodemap_modify --name c0 --property admin --value 1
+ do_facet mgs $LCTL nodemap_modify --name c0 --property trusted --value 1
+
+ wait_nm_sync c0 admin_nodemap
+ wait_nm_sync c0 trusted_nodemap
+
+ do_node ${clients_arr[0]} rm -rf $DIR/$tdir
+ nm_test_mkdir
+ do_node ${clients_arr[0]} chmod a+rwx $DIR/$tdir ||
+ error unable to chmod a+rwx test dir $DIR/$tdir
+
+ do_facet mgs $LCTL nodemap_modify --name c0 \
+ --property admin --value $admin
+ do_facet mgs $LCTL nodemap_modify --name c0 \
+ --property trusted --value $trust
+
+ wait_nm_sync c0 trusted_nodemap
+}
+
+# returns 0 if the number of ACLs does not change on the second (mapped) client
+# after being set on the first client
+nodemap_acl_test() {
+ local user="$1"
+ local set_client="$2"
+ local get_client="$3"
+ local check_setfacl="$4"
+ local setfacl_error=0
+ local testfile=$DIR/$tdir/$tfile
+ local RUNAS_USER="$RUNAS_CMD -u $user"
+ local acl_count=0
+ local acl_count_post=0
+
+ nodemap_acl_test_setup
+ sleep 5
+
+ do_node $set_client $RUNAS_USER touch $testfile
+
+ # ACL masks aren't filtered by nodemap code, so we ignore them
+ acl_count=$(do_node $get_client getfacl $testfile | grep -v mask |
+ wc -l)
+ do_node $set_client $RUNAS_USER setfacl -m $user:rwx $testfile ||
+ setfacl_error=1
+
+ # if check setfacl is set to 1, then it's supposed to error
+ if [ "$check_setfacl" == "1" ]; then
+ [ "$setfacl_error" != "1" ] && return 1
+ return 0
+ fi
+ [ "$setfacl_error" == "1" ] && echo "WARNING: unable to setfacl"
+
+ acl_count_post=$(do_node $get_client getfacl $testfile | grep -v mask |
+ wc -l)
+ [ $acl_count -eq $acl_count_post ] && return 0
+ return 1
+}
+
+test_23() {
+ nodemap_version_check || return 0
+ nodemap_test_setup
+
+ trap nodemap_test_cleanup EXIT
+ # 1 trusted cluster, 1 mapped cluster
+ local unmapped_fs=$((IDBASE+0))
+ local unmapped_c1=$((IDBASE+5))
+ local mapped_fs=$((IDBASE+2))
+ local mapped_c0=$((IDBASE+4))
+ local mapped_c1=$((IDBASE+6))
+
+ do_facet mgs $LCTL nodemap_modify --name c0 --property admin --value 1
+ do_facet mgs $LCTL nodemap_modify --name c0 --property trusted --value 1
+
+ do_facet mgs $LCTL nodemap_modify --name c1 --property admin --value 0
+ do_facet mgs $LCTL nodemap_modify --name c1 --property trusted --value 0
+
+ wait_nm_sync c1 trusted_nodemap
+
+ # setfacl on trusted cluster to unmapped user, verify it's not seen
+ nodemap_acl_test $unmapped_fs ${clients_arr[0]} ${clients_arr[1]} ||
+ error "acl count (1)"
+
+ # setfacl on trusted cluster to mapped user, verify it's seen
+ nodemap_acl_test $mapped_fs ${clients_arr[0]} ${clients_arr[1]} &&
+ error "acl count (2)"
+
+ # setfacl on mapped cluster to mapped user, verify it's seen
+ nodemap_acl_test $mapped_c1 ${clients_arr[1]} ${clients_arr[0]} &&
+ error "acl count (3)"
+
+ # setfacl on mapped cluster to unmapped user, verify error
+ nodemap_acl_test $unmapped_fs ${clients_arr[1]} ${clients_arr[0]} 1 ||
+ error "acl count (4)"
+
+ # 2 mapped clusters
+ do_facet mgs $LCTL nodemap_modify --name c0 --property admin --value 0
+ do_facet mgs $LCTL nodemap_modify --name c0 --property trusted --value 0
+
+ wait_nm_sync c0 trusted_nodemap
+
+ # setfacl to mapped user on c1, also mapped to c0, verify it's seen
+ nodemap_acl_test $mapped_c1 ${clients_arr[1]} ${clients_arr[0]} &&
+ error "acl count (5)"
+
+ # setfacl to mapped user on c1, not mapped to c0, verify not seen
+ nodemap_acl_test $unmapped_c1 ${clients_arr[1]} ${clients_arr[0]} ||
+ error "acl count (6)"
+
+ nodemap_test_cleanup
+}
+run_test 23 "test mapped ACLs"
+
+test_24() {
+ nodemap_test_setup
+
+ trap nodemap_test_cleanup EXIT
+ do_nodes $(comma_list $(all_server_nodes)) $LCTL get_param -R nodemap ||
+ error "proc readable file read failed"
+
+ nodemap_test_cleanup
+}
+run_test 24 "check nodemap proc files for LBUGs and Oopses"
+
+test_25() {
+ local tmpfile=$(mktemp)
+ local tmpfile2=$(mktemp)
+ local tmpfile3=$(mktemp)
+ local tmpfile4=$(mktemp)
+ local subdir=c0dir
+ local client
+
+ nodemap_version_check || return 0
+
+ # stop clients for this test
+ zconf_umount_clients $CLIENTS $MOUNT ||
+ error "unable to umount clients $CLIENTS"
+
+ export SK_UNIQUE_NM=true
+ nodemap_test_setup
+
+ # enable trusted/admin for setquota call in cleanup_and_setup_lustre()
+ i=0
+ for client in $clients; do
+ do_facet mgs $LCTL nodemap_modify --name c${i} \
+ --property admin --value 1
+ do_facet mgs $LCTL nodemap_modify --name c${i} \
+ --property trusted --value 1
+ ((i++))
+ done
+ wait_nm_sync c$((i - 1)) trusted_nodemap
+
+ trap nodemap_test_cleanup EXIT
+
+ # create a new, empty nodemap, and add fileset info to it
+ do_facet mgs $LCTL nodemap_add test25 ||
+ error "unable to create nodemap $testname"
+ do_facet mgs $LCTL set_param -P nodemap.$testname.fileset=/$subdir ||
+ error "unable to add fileset info to nodemap test25"
+
+ wait_nm_sync test25 id
+
+ do_facet mgs $LCTL nodemap_info > $tmpfile
+ do_facet mds $LCTL nodemap_info > $tmpfile2
+
+ if ! $SHARED_KEY; then
+ # will conflict with SK's nodemaps
+ cleanup_and_setup_lustre
+ fi
+ # stop clients for this test
+ zconf_umount_clients $CLIENTS $MOUNT ||
+ error "unable to umount clients $CLIENTS"
+
+ do_facet mgs $LCTL nodemap_info > $tmpfile3
+ diff -q $tmpfile3 $tmpfile >& /dev/null ||
+ error "nodemap_info diff on MGS after remount"
+
+ do_facet mds $LCTL nodemap_info > $tmpfile4
+ diff -q $tmpfile4 $tmpfile2 >& /dev/null ||
+ error "nodemap_info diff on MDS after remount"
+
+ # cleanup nodemap
+ do_facet mgs $LCTL nodemap_del test25 ||
+ error "cannot delete nodemap test25 from config"
+ nodemap_test_cleanup
+ # restart clients previously stopped
+ zconf_mount_clients $CLIENTS $MOUNT ||
+ error "unable to mount clients $CLIENTS"
+
+ rm -f $tmpfile $tmpfile2
+ export SK_UNIQUE_NM=false
+}
+run_test 25 "test save and reload nodemap config"
+
+test_26() {
+ nodemap_version_check || return 0
+
+ local large_i=32000
+
+ do_facet mgs "seq -f 'c%g' $large_i | xargs -n1 $LCTL nodemap_add"
+ wait_nm_sync c$large_i admin_nodemap
+
+ do_facet mgs "seq -f 'c%g' $large_i | xargs -n1 $LCTL nodemap_del"
+ wait_nm_sync c$large_i admin_nodemap
+}
+run_test 26 "test transferring very large nodemap"
+
+test_27() {
+ local subdir=c0dir
+ local subsubdir=c0subdir
+ local fileset_on_mgs=""
+ local loop=0
+
+ nodemap_test_setup
+ if $SHARED_KEY; then
+ export SK_UNIQUE_NM=true
+ else
+ # will conflict with SK's nodemaps
+ trap nodemap_test_cleanup EXIT
+ fi
+
+ fileset_test_setup
+
+ # add fileset info to nodemap
+ do_facet mgs $LCTL set_param -P nodemap.c0.fileset=/$subdir ||
+ error "unable to add fileset info to nodemap c0"
+ wait_nm_sync c0 fileset "nodemap.c0.fileset=/$subdir"
+
+ # re-mount client
+ zconf_umount_clients ${clients_arr[0]} $MOUNT ||
+ error "unable to umount client ${clients_arr[0]}"
+ # set some generic fileset to trigger SSK code
+ export FILESET=/
+ zconf_mount_clients ${clients_arr[0]} $MOUNT $MOUNT_OPTS ||
+ error "unable to remount client ${clients_arr[0]}"
+ unset FILESET
+
+ # test mount point content
+ do_node ${clients_arr[0]} test -f $MOUNT/this_is_$subdir ||
+ error "fileset not taken into account"
+
+ # re-mount client with sub-subdir
+ zconf_umount_clients ${clients_arr[0]} $MOUNT ||
+ error "unable to umount client ${clients_arr[0]}"
+ export FILESET=/$subsubdir
+ zconf_mount_clients ${clients_arr[0]} $MOUNT $MOUNT_OPTS ||
+ error "unable to remount client ${clients_arr[0]}"
+ unset FILESET
+
+ # test mount point content
+ do_node ${clients_arr[0]} test -f $MOUNT/this_is_$subsubdir ||
+ error "subdir of fileset not taken into account"
+
+ # remove fileset info from nodemap
+ do_facet mgs $LCTL nodemap_set_fileset --name c0 --fileset \'\' ||
+ error "unable to delete fileset info on nodemap c0"
+ fileset_on_mgs=$(do_facet mgs $LCTL get_param nodemap.c0.fileset)
+ while [ "${fileset_on_mgs}" != "nodemap.c0.fileset=" ]; do
+ if [ $loop -eq 10 ]; then
+ error "On MGS, fileset cannnot be cleared"
+ break;
+ else
+ loop=$((loop+1))
+ echo "On MGS, fileset is still ${fileset_on_mgs}, waiting..."
+ sleep 20;
+ fi
+ fileset_on_mgs=$(do_facet mgs $LCTL get_param nodemap.c0.fileset)
+ done
+ do_facet mgs $LCTL set_param -P nodemap.c0.fileset=\'\' ||
+ error "unable to reset fileset info on nodemap c0"
+ wait_nm_sync c0 fileset
+
+ # re-mount client
+ zconf_umount_clients ${clients_arr[0]} $MOUNT ||
+ error "unable to umount client ${clients_arr[0]}"
+ zconf_mount_clients ${clients_arr[0]} $MOUNT $MOUNT_OPTS ||
+ error "unable to remount client ${clients_arr[0]}"
+
+ # test mount point content
+ do_node ${clients_arr[0]} test -d $MOUNT/$subdir ||
+ (ls $MOUNT ; error "fileset not cleared on nodemap c0")
+
+ # back to non-nodemap setup
+ if $SHARED_KEY; then
+ export SK_UNIQUE_NM=false
+ zconf_umount_clients ${clients_arr[0]} $MOUNT ||
+ error "unable to umount client ${clients_arr[0]}"
+ fi
+ fileset_test_cleanup
+ nodemap_test_cleanup
+ if $SHARED_KEY; then
+ zconf_mount_clients ${clients_arr[0]} $MOUNT $MOUNT_OPTS ||
+ error "unable to remount client ${clients_arr[0]}"
+ fi
+}
+run_test 27 "test fileset in nodemap"
+
+test_28() {
+ if ! $SHARED_KEY; then
+ skip "need shared key feature for this test" && return
+ fi
+ mkdir -p $DIR/$tdir || error "mkdir failed"
+ touch $DIR/$tdir/$tdir.out || error "touch failed"
+ if [ ! -f $DIR/$tdir/$tdir.out ]; then
+ error "read before rotation failed"
+ fi
+ # store top key identity to ensure rotation has occurred
+ SK_IDENTITY_OLD=$(lctl get_param *.*.*srpc* | grep "expire" |
+ head -1 | awk '{print $15}' | cut -c1-8)
+ do_facet $SINGLEMDS lfs flushctx ||
+ error "could not run flushctx on $SINGLEMDS"
+ sleep 5
+ lfs flushctx || error "could not run flushctx on client"
+ sleep 5
+ # verify new key is in place
+ SK_IDENTITY_NEW=$(lctl get_param *.*.*srpc* | grep "expire" |
+ head -1 | awk '{print $15}' | cut -c1-8)
+ if [ $SK_IDENTITY_OLD == $SK_IDENTITY_NEW ]; then
+ error "key did not rotate correctly"
+ fi
+ if [ ! -f $DIR/$tdir/$tdir.out ]; then
+ error "read after rotation failed"
+ fi
+}
+run_test 28 "check shared key rotation method"
+
+test_29() {
+ if ! $SHARED_KEY; then
+ skip "need shared key feature for this test" && return
+ fi
+ if [ $SK_FLAVOR != "ski" ] && [ $SK_FLAVOR != "skpi" ]; then
+ skip "test only valid if integrity is active"
+ fi
+ rm -r $DIR/$tdir
+ mkdir $DIR/$tdir || error "mkdir"
+ touch $DIR/$tdir/$tfile || error "touch"
+ zconf_umount_clients ${clients_arr[0]} $MOUNT ||
+ error "unable to umount clients"
+ keyctl show | awk '/lustre/ { print $1 }' |
+ xargs -IX keyctl unlink X
+ OLD_SK_PATH=$SK_PATH
+ export SK_PATH=/dev/null
+ if zconf_mount_clients ${clients_arr[0]} $MOUNT; then
+ export SK_PATH=$OLD_SK_PATH
+ if [ -e $DIR/$tdir/$tfile ]; then
+ error "able to mount and read without key"
+ else
+ error "able to mount without key"
+ fi
+ else
+ export SK_PATH=$OLD_SK_PATH
+ keyctl show | awk '/lustre/ { print $1 }' |
+ xargs -IX keyctl unlink X
+ fi
+}
+run_test 29 "check for missing shared key"
+
+test_30() {
+ if ! $SHARED_KEY; then
+ skip "need shared key feature for this test" && return
+ fi
+ if [ $SK_FLAVOR != "ski" ] && [ $SK_FLAVOR != "skpi" ]; then
+ skip "test only valid if integrity is active"
+ fi
+ mkdir -p $DIR/$tdir || error "mkdir failed"
+ touch $DIR/$tdir/$tdir.out || error "touch failed"
+ zconf_umount_clients ${clients_arr[0]} $MOUNT ||
+ error "unable to umount clients"
+ # unload keys from ring
+ keyctl show | awk '/lustre/ { print $1 }' |
+ xargs -IX keyctl unlink X
+ # invalidate the key with bogus filesystem name
+ lgss_sk -w $SK_PATH/$FSNAME-bogus.key -f $FSNAME.bogus \
+ -t client -d /dev/urandom || error "lgss_sk failed (1)"
+ do_facet $SINGLEMDS lfs flushctx || error "could not run flushctx"
+ OLD_SK_PATH=$SK_PATH
+ export SK_PATH=$SK_PATH/$FSNAME-bogus.key
+ if zconf_mount_clients ${clients_arr[0]} $MOUNT; then
+ SK_PATH=$OLD_SK_PATH
+ if [ -a $DIR/$tdir/$tdir.out ]; then
+ error "mount and read file with invalid key"
+ else
+ error "mount with invalid key"
+ fi
+ fi
+ SK_PATH=$OLD_SK_PATH
+ zconf_umount_clients ${clients_arr[0]} $MOUNT ||
+ error "unable to umount clients"
+}
+run_test 30 "check for invalid shared key"
+
log "cleanup: ======================================================"
sec_unsetup() {
- for num in `seq $MDSCOUNT`; do
+ ## nodemap deactivated
+ do_facet mgs $LCTL nodemap_activate 0
+
+ for num in $(seq $MDSCOUNT); do
if [ "${identity_old[$num]}" = 1 ]; then
- switch_identity $num false || identity_old[$num]=$?
+ switch_identity $num false || identity_old[$num]=$?
fi
- done
+ done
- $RUNAS -u $ID0 ls $DIR
- $RUNAS -u $ID1 ls $DIR
+ $RUNAS_CMD -u $ID0 ls $DIR
+ $RUNAS_CMD -u $ID1 ls $DIR
}
sec_unsetup
git://git.whamcloud.com / fs / lustre-release.git / blobdiff