export PATH=$PWD/$SRCDIR:$SRCDIR:$PWD/$SRCDIR/../utils:$PATH:/sbin
ONLY=${ONLY:-"$*"}
-ALWAYS_EXCEPT="$SANITY_QUOTA_EXCEPT"
+# enable test_23 after bug 16542 fixed.
+ALWAYS_EXCEPT="10 $SANITY_QUOTA_EXCEPT"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
case `uname -r` in
TSTUSR=${TSTUSR:-"quota_usr"}
TSTUSR2=${TSTUSR2:-"quota_2usr"}
BLK_SZ=1024
-BUNIT_SZ=${BUNIT_SZ:-1000} # default 1000 quota blocks
-BTUNE_SZ=${BTUNE_SZ:-500} # default 50% of BUNIT_SZ
-IUNIT_SZ=${IUNIT_SZ:-10} # default 10 files
-ITUNE_SZ=${ITUNE_SZ:-5} # default 50% of IUNIT_SZ
+BUNIT_SZ=${BUNIT_SZ:-1024} # min block quota unit(kB)
+IUNIT_SZ=${IUNIT_SZ:-10} # min inode quota unit
MAX_DQ_TIME=604800
MAX_IQ_TIME=604800
. $LUSTRE/tests/test-framework.sh
init_test_env $@
. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
+DIRECTIO=${DIRECTIO:-$LUSTRE/tests/directio}
-[ "$SLOW" = "no" ] && EXCEPT_SLOW="9 10 11"
+[ $MDSCOUNT -gt 1 ] && skip "CMD case" && exit 0
+remote_mds_nodsh && skip "remote MDS with nodsh" && exit 0
+remote_ost_nodsh && skip "remote OST with nodsh" && exit 0
+
+[ "$SLOW" = "no" ] && EXCEPT_SLOW="9 10 11 18b 21"
QUOTALOG=${TESTSUITELOG:-$TMP/$(basename $0 .sh).log}
DIR=${DIR:-$MOUNT}
DIR2=${DIR2:-$MOUNT2}
-cleanup_and_setup_lustre
+check_and_setup_lustre
-LOVNAME=`cat $LPROC/llite/*/lov/common_name | tail -n 1`
-OSTCOUNT=`cat $LPROC/lov/$LOVNAME/numobd`
+LOVNAME=`lctl get_param -n llite.*.lov.common_name | tail -n 1`
+OSTCOUNT=`lctl get_param -n lov.$LOVNAME.numobd`
-SHOW_QUOTA_USER="$LFS quota -u $TSTUSR $DIR"
-SHOW_QUOTA_GROUP="$LFS quota -g $TSTUSR $DIR"
+SHOW_QUOTA_USER="$LFS quota -v -u $TSTUSR $DIR"
+SHOW_QUOTA_USER2="$LFS quota -v -u $TSTUSR2 $DIR"
+SHOW_QUOTA_GROUP="$LFS quota -v -g $TSTUSR $DIR"
+SHOW_QUOTA_GROUP2="$LFS quota -v -g $TSTUSR2 $DIR"
SHOW_QUOTA_INFO="$LFS quota -t $DIR"
# control the time of tests
# set_blk_tunables(btune_sz)
set_blk_tunesz() {
+ local btune=$(($1 * BLK_SZ))
# set btune size on all obdfilters
- do_facet ost1 "set -x; for i in /proc/fs/lustre/obdfilter/*/quota_btune_sz; do
- echo $(($1 * BLK_SZ)) >> \\\$i;
- done"
+ do_facet ost1 "lctl set_param lquota.${FSNAME}-OST*.quota_btune_sz=$btune"
# set btune size on mds
- do_facet $SINGLEMDS "for i in /proc/fs/lustre/mds/${FSNAME}-MDT*/quota_btune_sz; do
- echo $(($1 * BLK_SZ)) >> \\\$i;
- done"
+ do_facet $SINGLEMDS "lctl set_param lquota.mdd_obd-${FSNAME}-MDT*.quota_btune_sz=$btune"
}
# set_blk_unitsz(bunit_sz)
set_blk_unitsz() {
- do_facet ost1 "for i in /proc/fs/lustre/obdfilter/*/quota_bunit_sz; do
- echo $(($1 * BLK_SZ)) >> \\\$i;
- done"
- do_facet $SINGLEMDS "for i in /proc/fs/lustre/mds/${FSNAME}-MDT*/quota_bunit_sz; do
- echo $(($1 * BLK_SZ)) >> \\\$i;
- done"
+ local bunit=$(($1 * BLK_SZ))
+ # set bunit size on all obdfilters
+ do_facet ost1 "lctl set_param lquota.${FSNAME}-OST*.quota_bunit_sz=$bunit"
+ # set bunit size on mds
+ do_facet $SINGLEMDS "lctl set_param lquota.mdd_obd-${FSNAME}-MDT*.quota_bunit_sz=$bunit"
}
# set_file_tunesz(itune_sz)
set_file_tunesz() {
- # set iunit and itune size on all obdfilters
- do_facet ost1 "for i in /proc/fs/lustre/obdfilter/*/quota_itune_sz; do
- echo $1 >> \\\$i;
- done"
- # set iunit and itune size on mds
- do_facet $SINGLEMDS "for i in /proc/fs/lustre/mds/${FSNAME}-MDT*/quota_itune_sz; do
- echo $1 >> \\\$i;
- done"
+ local itune=$1
+ # set itune size on all obdfilters
+ do_facet ost1 "lctl set_param lquota.${FSNAME}-OST*.quota_itune_sz=$itune"
+ # set itune size on mds
+ do_facet $SINGLEMDS "lctl set_param lquota.mdd_obd-${FSNAME}-MDT*.quota_itune_sz=$itune"
}
# set_file_unitsz(iunit_sz)
set_file_unitsz() {
- do_facet ost1 "for i in /proc/fs/lustre/obdfilter/*/quota_iunit_sz; do
- echo $1 >> \\\$i;
- done"
- do_facet $SINGLEMDS "for i in /proc/fs/lustre/mds/${FSNAME}-MDT*/quota_iunit_sz; do
- echo $1 >> \\\$i;
- done"
+ local iunit=$1
+ # set iunit size on all obdfilters
+ do_facet ost1 "lctl set_param lquota.${FSNAME}-OST*.quota_iunit_sz=$iunit"
+ # set iunit size on mds
+ do_facet $SINGLEMDS "lctl set_param lquota.mdd_obd-${FSNAME}-MDT*.quota_iunit_sz=$iunit"
}
-# These are for test on local machine,if run sanity-quota.sh on
-# real cluster, ltest should have setup the test environment:
-#
-# - create test user/group on all servers with same id.
-# - set unit size/tune on all servers size to reasonable value.
-pre_test() {
- if [ -z "$NOSETUP" ]; then
- # set block tunables
- set_blk_tunesz $BTUNE_SZ
- set_blk_unitsz $BUNIT_SZ
- # set file tunables
- set_file_tunesz $ITUNE_SZ
- set_file_unitsz $IUNIT_SZ
- fi
-}
-pre_test
-
-post_test() {
- if [ -z "$NOSETUP" ]; then
- # restore block tunables to default size
- set_blk_unitsz $((1024 * 100))
- set_blk_tunesz $((1024 * 50))
- # restore file tunables to default size
- set_file_unitsz 5000
- set_file_tunesz 2500
- fi
+lustre_fail() {
+ local fail_node=$1
+ local fail_loc=$2
+
+ case $fail_node in
+ "mds" )
+ do_facet $SINGLEMDS "lctl set_param fail_loc=$fail_loc" ;;
+ "ost" )
+ for num in `seq $OSTCOUNT`; do
+ do_facet ost$num "lctl set_param fail_loc=$fail_loc"
+ done ;;
+ "mds_ost" )
+ do_facet $SINGLEMDS "lctl set_param fail_loc=$fail_loc" ;
+ for num in `seq $OSTCOUNT`; do
+ do_facet ost$num "lctl set_param fail_loc=$fail_loc"
+ done ;;
+ * ) echo "usage: lustre_fail fail_node fail_loc" ;
+ return 1 ;;
+ esac
}
-RUNAS="runas -u $TSTID"
-RUNAS2="runas -u $TSTID2"
-FAIL_ON_ERROR=true check_runas_id $TSTID $RUNAS
-FAIL_ON_ERROR=true check_runas_id $TSTID2 $RUNAS2
+RUNAS="runas -u $TSTID -g $TSTID"
+RUNAS2="runas -u $TSTID2 -g $TSTID2"
+FAIL_ON_ERROR=true check_runas_id $TSTID $TSTID $RUNAS
+FAIL_ON_ERROR=true check_runas_id $TSTID2 $TSTID2 $RUNAS2
FAIL_ON_ERROR=false
+run_test_with_stat() {
+ (($# != 2)) && error "the number of arguments is wrong"
+
+ do_facet $SINGLEMDS "lctl set_param lquota.mdd_obd-${FSNAME}-MDT*.stats=0" > /dev/null
+ for j in `seq $OSTCOUNT`; do
+ do_facet ost$j "lctl set_param lquota.${FSNAME}-OST*.stats=0" > /dev/null
+ done
+ run_test "$@"
+ if [ ${STAT:-"yes"} != "no" -a -z "$LAST_SKIPPED" ]; then
+ echo "statistics info begin ***************************************"
+ do_facet $SINGLEMDS "lctl get_param lquota.mdd_obd-${FSNAME}-MDT*.stats"
+ for j in `seq $OSTCOUNT`; do
+ do_facet ost$j "lctl get_param lquota.${FSNAME}-OST*.stats"
+ done
+ echo "statistics info end ***************************************"
+ fi
+}
+
+#
+# clear quota limits for a user or a group
+# usage: resetquota -u username
+# resetquota -g groupname
+
+resetquota() {
+ [ "$#" != 2 ] && error "resetquota: wrong number of arguments: $#"
+ [ "$1" != "-u" -a "$1" != "-g" ] && error "resetquota: wrong specifier $1 passed"
+ $LFS setquota "$1" "$2" -b 0 -B 0 -i 0 -I 0 $MOUNT || error "resetquota failed"
+}
+
# set quota
test_0() {
$LFS quotaoff -ug $DIR
$LFS quotacheck -ug $DIR
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR
- $LFS setquota -g $TSTUSR 0 0 0 0 $DIR
+ resetquota -u $TSTUSR
+ resetquota -g $TSTUSR
+
+ lctl set_param debug="+quota"
+ do_facet $SINGLEMDS "lctl set_param debug=+quota"
+ for num in `seq $OSTCOUNT`; do
+ do_facet ost$num "lctl set_param debug=+quota"
+ done
}
-run_test 0 "Set quota ============================="
+run_test_with_stat 0 "Set quota ============================="
-# block hard limit (normal use and out of quota)
-test_1() {
+# test for specific quota limitation, qunit, qtune $1=block_quota_limit
+test_1_sub() {
+ LIMIT=$1
mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
+ TESTFILE="$DIR/$tdir/$tfile-0"
- LIMIT=$(( $BUNIT_SZ * $(($OSTCOUNT + 1)) * 5)) # 5 bunits each sever
- TESTFILE=$DIR/$tdir/$tfile-0
-
- echo " User quota (limit: $LIMIT kbytes)"
- $LFS setquota -u $TSTUSR 0 $LIMIT 0 0 $DIR
+ wait_delete_completed
+
+ # test for user
+ log " User quota (limit: $LIMIT kbytes)"
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ sleep 3
$SHOW_QUOTA_USER
-
+
$LFS setstripe $TESTFILE -c 1
chown $TSTUSR.$TSTUSR $TESTFILE
- echo " Write ..."
+ log " Write ..."
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) || error "(usr) write failure, but expect success"
- echo " Done"
- echo " Write out of block quota ..."
+ log " Done"
+ log " Write out of block quota ..."
# this time maybe cache write, ignore it's failure
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) seek=$(($LIMIT/2)) || true
# flush cache, ensure noquota flag is setted on client
- sync; sleep 1; sync;
+ cancel_lru_locks osc
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$LIMIT && error "(usr) write success, but expect EDQUOT"
rm -f $TESTFILE
-
- echo " Group quota (limit: $LIMIT kbytes)"
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR # clear user limit
- $LFS setquota -g $TSTUSR 0 $LIMIT 0 0 $DIR
+ sync; sleep 1; sync;
+ OST0_UUID=`do_facet ost1 $LCTL dl | grep -m1 obdfilter | awk '{print $((NF-1))}'`
+ OST0_QUOTA_USED=`$LFS quota -o $OST0_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ echo $OST0_QUOTA_USED
+ [ $OST0_QUOTA_USED -ne 0 ] && \
+ ($SHOW_QUOTA_USER; error "quota deleted isn't released")
+ $SHOW_QUOTA_USER
+ resetquota -u $TSTUSR
+
+ # test for group
+ log "--------------------------------------"
+ log " Group quota (limit: $LIMIT kbytes)"
+ $LFS setquota -g $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ sleep 3
$SHOW_QUOTA_GROUP
- TESTFILE=$DIR/$tdir/$tfile-1
+ TESTFILE="$DIR/$tdir/$tfile-1"
$LFS setstripe $TESTFILE -c 1
chown $TSTUSR.$TSTUSR $TESTFILE
- echo " Write ..."
+ log " Write ..."
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) || error "(grp) write failure, but expect success"
- echo " Done"
- echo " Write out of block quota ..."
+ log " Done"
+ log " Write out of block quota ..."
# this time maybe cache write, ignore it's failure
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) seek=$(($LIMIT/2)) || true
- sync; sleep 1; sync;
+ cancel_lru_locks osc
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$LIMIT && error "(grp) write success, but expect EDQUOT"
# cleanup
rm -f $TESTFILE
- $LFS setquota -g $TSTUSR 0 0 0 0 $DIR
+ sync; sleep 1; sync;
+ OST0_UUID=`do_facet ost1 $LCTL dl | grep -m1 obdfilter | awk '{print $((NF-1))}'`
+ OST0_QUOTA_USED=`$LFS quota -o $OST0_UUID -g $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ echo $OST0_QUOTA_USED
+ [ $OST0_QUOTA_USED -ne 0 ] && \
+ ($SHOW_QUOTA_USER; error "quota deleted isn't released")
+ $SHOW_QUOTA_GROUP
+ resetquota -g $TSTUSR
}
-run_test 1 "Block hard limit (normal use and out of quota) ==="
-# file hard limit (normal use and out of quota)
-test_2() {
+# block hard limit (normal use and out of quota)
+test_1() {
+ for i in `seq 1 $cycle`; do
+ # define blk_qunit is between 1M and 4M
+ blk_qunit=$(( $RANDOM % 3072 + 1024 ))
+ blk_qtune=$(( $RANDOM % $blk_qunit ))
+ # other osts and mds will occupy at 1M blk quota
+ b_limit=$(( ($RANDOM - 16384) / 8 + $OSTCOUNT * $blk_qunit * 4 ))
+ set_blk_tunesz $blk_qtune
+ set_blk_unitsz $blk_qunit
+ echo "cycle: $i(total $cycle) bunit:$blk_qunit, btune:$blk_qtune, blimit:$b_limit"
+ test_1_sub $b_limit
+ echo "=================================================="
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+ done
+}
+run_test_with_stat 1 "Block hard limit (normal use and out of quota) ==="
+
+# test for specific quota limitation, qunit, qtune $1=block_quota_limit
+test_2_sub() {
+ LIMIT=$1
mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
+ TESTFILE="$DIR/$tdir/$tfile-0"
- LIMIT=$(($IUNIT_SZ * 10)) # 10 iunits on mds
- TESTFILE=$DIR/$tdir/$tfile-0
+ wait_delete_completed
- echo " User quota (limit: $LIMIT files)"
- $LFS setquota -u $TSTUSR 0 0 0 $LIMIT $DIR
+ # test for user
+ log " User quota (limit: $LIMIT files)"
+ $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I $LIMIT $DIR
+ sleep 3
$SHOW_QUOTA_USER
- echo " Create $LIMIT files ..."
+ log " Create $LIMIT files ..."
$RUNAS createmany -m ${TESTFILE} $LIMIT || \
- error "(usr) create failure, but expect success"
- echo " Done"
- echo " Create out of file quota ..."
+ error "(usr) create failure, but expect success"
+ log " Done"
+ log " Create out of file quota ..."
$RUNAS touch ${TESTFILE}_xxx && \
- error "(usr) touch success, but expect EDQUOT"
+ error "(usr) touch success, but expect EDQUOT"
unlinkmany ${TESTFILE} $LIMIT
- rm ${TESTFILE}_xxx
+ rm -f ${TESTFILE}_xxx
+ sync; sleep 1; sync;
+
+ MDS_UUID=`do_facet $SINGLEMDS $LCTL dl | grep -m1 " mdt " | awk '{print $((NF-1))}'`
+ MDS_QUOTA_USED=`$LFS quota -o $MDS_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ echo $MDS_QUOTA_USED
+ [ $MDS_QUOTA_USED -ne 0 ] && \
+ ($SHOW_QUOTA_USER; error "quota deleted isn't released")
+ $SHOW_QUOTA_USER
+ resetquota -u $TSTUSR
- echo " Group quota (limit: $LIMIT files)"
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR # clear user limit
- $LFS setquota -g $TSTUSR 0 0 0 $LIMIT $DIR
+ # test for group
+ log "--------------------------------------"
+ log " Group quota (limit: $LIMIT FILE)"
+ $LFS setquota -g $TSTUSR -b 0 -B 0 -i 0 -I $LIMIT $DIR
+ sleep 3
$SHOW_QUOTA_GROUP
TESTFILE=$DIR/$tdir/$tfile-1
- echo " Create $LIMIT files ..."
+ log " Create $LIMIT files ..."
$RUNAS createmany -m ${TESTFILE} $LIMIT || \
- error "(grp) create failure, but expect success"
+ error "(usr) create failure, but expect success"
+ log " Done"
+ log " Create out of file quota ..."
+ $RUNAS touch ${TESTFILE}_xxx && \
+ error "(usr) touch success, but expect EDQUOT"
- echo " Done"
- echo " Create out of file quota ..."
- $RUNAS touch ${TESTFILE}_xxx && \
- error "(grp) touch success, but expect EDQUOT"
+ unlinkmany ${TESTFILE} $LIMIT
+ rm -f ${TESTFILE}_xxx
+ sync; sleep 1; sync;
- $RUNAS touch ${TESTFILE}_xxx > /dev/null 2>&1 && error "(grp) touch success, but expect EDQUOT"
+ MDS_UUID=`do_facet $SINGLEMDS $LCTL dl | grep -m1 " mdt " | awk '{print $((NF-1))}'`
+ MDS_QUOTA_USED=`$LFS quota -o $MDS_UUID -g $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ echo $MDS_QUOTA_USED
+ [ $MDS_QUOTA_USED -ne 0 ] && \
+ ($SHOW_QUOTA_USER; error "quota deleted isn't released")
+ $SHOW_QUOTA_GROUP
+ resetquota -g $TSTUSR
+}
- # cleanup
- unlinkmany ${TESTFILE} $LIMIT
- rm ${TESTFILE}_xxx
+# file hard limit (normal use and out of quota)
+test_2() {
+ for i in `seq 1 $cycle`; do
+ if [ $i -eq 1 ]; then
+ ino_qunit=52
+ ino_qtune=41
+ i_limit=11
+ else
+ # define ino_qunit is between 10 and 100
+ ino_qunit=$(( $RANDOM % 90 + 10 ))
+ ino_qtune=$(( $RANDOM % $ino_qunit ))
+ # RANDOM's maxium is 32767
+ i_limit=$(( $RANDOM % 990 + 10 ))
+ fi
- $LFS setquota -g $TSTUSR 0 0 0 0 $DIR
+ set_file_tunesz $ino_qtune
+ set_file_unitsz $ino_qunit
+ echo "cycle: $i(total $cycle) iunit:$ino_qunit, itune:$ino_qtune, ilimit:$i_limit"
+ test_2_sub $i_limit
+ echo "=================================================="
+ set_file_unitsz 5120
+ set_file_tunesz 2560
+ done
}
-run_test 2 "File hard limit (normal use and out of quota) ==="
+run_test_with_stat 2 "File hard limit (normal use and out of quota) ==="
test_block_soft() {
TESTFILE=$1
TIMER=$(($2 * 3 / 2))
OFFSET=0
+ wait_delete_completed
+
echo " Write to exceed soft limit"
RUNDD="$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ"
$RUNDD count=$((BUNIT_SZ+1)) || \
- error "write failure, but expect success"
+ error "write failure, but expect success"
OFFSET=$((OFFSET + BUNIT_SZ + 1))
- sync; sleep 1; sync;
+ cancel_lru_locks osc
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
echo " Write before timer goes off"
$RUNDD count=$BUNIT_SZ seek=$OFFSET || \
- error "write failure, but expect success"
+ error "write failure, but expect success"
OFFSET=$((OFFSET + BUNIT_SZ))
- sync; sleep 1; sync;
+ cancel_lru_locks osc
echo " Done"
-
- echo " Sleep $TIMER seconds ..."
- sleep $TIMER
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
- $SHOW_QUOTA_INFO
+ echo " Sleep $TIMER seconds ..."
+ sleep $TIMER
+
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
+ $SHOW_QUOTA_INFO
echo " Write after timer goes off"
# maybe cache write, ignore.
- sync; sleep 1; sync;
$RUNDD count=$BUNIT_SZ seek=$OFFSET || true
OFFSET=$((OFFSET + BUNIT_SZ))
- sync; sleep 1; sync;
+ cancel_lru_locks osc
$RUNDD count=$BUNIT_SZ seek=$OFFSET && \
- error "write success, but expect EDQUOT"
+ error "write success, but expect EDQUOT"
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
- $SHOW_QUOTA_INFO
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
+ $SHOW_QUOTA_INFO
echo " Unlink file to stop timer"
rm -f $TESTFILE
+ sync; sleep 1; sync
echo " Done"
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
- $SHOW_QUOTA_INFO
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
+ $SHOW_QUOTA_INFO
echo " Write ..."
$RUNDD count=$BUNIT_SZ || error "write failure, but expect success"
# cleanup
rm -f $TESTFILE
+ sync; sleep 3; sync;
}
# block soft limit (start timer, timer goes off, stop timer)
mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
- LIMIT=$(( $BUNIT_SZ * 2 )) # 1 bunit on mds and 1 bunit on the ost
+ # 1 bunit on mds and 1 bunit on every ost
+ LIMIT=$(( $BUNIT_SZ * ($OSTCOUNT + 1) ))
GRACE=10
echo " User quota (soft limit: $LIMIT kbytes grace: $GRACE seconds)"
$LFS setstripe $TESTFILE -c 1
chown $TSTUSR.$TSTUSR $TESTFILE
- $LFS setquota -t -u $GRACE $MAX_IQ_TIME $DIR
- $LFS setquota -u $TSTUSR $LIMIT 0 0 0 $DIR
+ $LFS setquota -t -u --block-grace $GRACE --inode-grace $MAX_IQ_TIME $DIR
+ $LFS setquota -u $TSTUSR -b $LIMIT -B 0 -i 0 -I 0 $DIR
test_block_soft $TESTFILE $GRACE
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR
+ resetquota -u $TSTUSR
echo " Group quota (soft limit: $LIMIT kbytes grace: $GRACE seconds)"
TESTFILE=$DIR/$tdir/$tfile-1
$LFS setstripe $TESTFILE -c 1
chown $TSTUSR.$TSTUSR $TESTFILE
- $LFS setquota -t -g $GRACE $MAX_IQ_TIME $DIR
- $LFS setquota -g $TSTUSR $LIMIT 0 0 0 $DIR
+ $LFS setquota -t -g --block-grace $GRACE --inode-grace $MAX_IQ_TIME $DIR
+ $LFS setquota -g $TSTUSR -b $LIMIT -B 0 -i 0 -I 0 $DIR
test_block_soft $TESTFILE $GRACE
- $LFS setquota -g $TSTUSR 0 0 0 0 $DIR
+ resetquota -g $TSTUSR
}
-run_test 3 "Block soft limit (start timer, timer goes off, stop timer) ==="
+run_test_with_stat 3 "Block soft limit (start timer, timer goes off, stop timer) ==="
test_file_soft() {
TESTFILE=$1
LIMIT=$2
TIMER=$(($3 * 3 / 2))
+ wait_delete_completed
+
echo " Create files to exceed soft limit"
$RUNAS createmany -m ${TESTFILE}_ $((LIMIT + 1)) || \
error "create failure, but expect success"
echo " Sleep $TIMER seconds ..."
sleep $TIMER
-
+
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
$SHOW_QUOTA_INFO
-
+
echo " Create file after timer goes off"
- $RUNAS createmany -m ${TESTFILE}_after_ $((IUNIT_SZ - 2)) || \
- error "create ${TESTFILE}_after failure, but expect success"
+ # the least of inode qunit is 2, so there are at most 3(qunit:2+qtune:1)
+ # inode quota left here
+ $RUNAS touch ${TESTFILE}_after ${TESTFILE}_after1 ${TESTFILE}_after2 || true
sync; sleep 1; sync
- $RUNAS touch ${TESTFILE}_after && \
+ $RUNAS touch ${TESTFILE}_after3 && \
error "create after timer expired, but expect EDQUOT"
sync; sleep 1; sync
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
$SHOW_QUOTA_INFO
-
+
echo " Unlink files to stop timer"
find `dirname $TESTFILE` -name "`basename ${TESTFILE}`*" | xargs rm -f
echo " Done"
# cleanup
rm -f ${TESTFILE}_xxx
+ sync; sleep 3; sync;
}
# file soft limit (start timer, timer goes off, stop timer)
GRACE=5
echo " User quota (soft limit: $LIMIT files grace: $GRACE seconds)"
- $LFS setquota -t -u $MAX_DQ_TIME $GRACE $DIR
- $LFS setquota -u $TSTUSR 0 0 $LIMIT 0 $DIR
+ $LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace $GRACE $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B 0 -i $LIMIT -I 0 $DIR
$SHOW_QUOTA_USER
test_file_soft $TESTFILE $LIMIT $GRACE
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR
+ resetquota -u $TSTUSR
echo " Group quota (soft limit: $LIMIT files grace: $GRACE seconds)"
- $LFS setquota -t -g $MAX_DQ_TIME $GRACE $DIR
- $LFS setquota -g $TSTUSR 0 0 $LIMIT 0 $DIR
+ $LFS setquota -t -g --block-grace $MAX_DQ_TIME --inode-grace $GRACE $DIR
+ $LFS setquota -g $TSTUSR -b 0 -B 0 -i $LIMIT -I 0 $DIR
$SHOW_QUOTA_GROUP
TESTFILE=$DIR/$tdir/$tfile-1
test_file_soft $TESTFILE $LIMIT $GRACE
- $LFS setquota -g $TSTUSR 0 0 0 0 $DIR
+ resetquota -g $TSTUSR
# cleanup
- $LFS setquota -t -u $MAX_DQ_TIME $MAX_IQ_TIME $DIR
- $LFS setquota -t -g $MAX_DQ_TIME $MAX_IQ_TIME $DIR
+ $LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace $MAX_IQ_TIME $DIR
+ $LFS setquota -t -g --block-grace $MAX_DQ_TIME --inode-grace $MAX_IQ_TIME $DIR
}
-run_test 4a "File soft limit (start timer, timer goes off, stop timer) ==="
+run_test_with_stat 4a "File soft limit (start timer, timer goes off, stop timer) ==="
test_4b() { # was test_4a
- GR_STR1="1w3d"
- GR_STR2="1000s"
- GR_STR3="5s"
- GR_STR4="1w2d3h4m5s"
- GR_STR5="5c"
- GR_STR6="1111111111111111"
-
- # test of valid grace strings handling
- echo " Valid grace strings test"
- $LFS setquota -t -u $GR_STR1 $GR_STR2 $DIR
- $LFS quota -u -t $DIR | grep "Block grace time: $GR_STR1"
- $LFS setquota -t -g $GR_STR3 $GR_STR4 $DIR
- $LFS quota -g -t $DIR | grep "Inode grace time: $GR_STR4"
-
- # test of invalid grace strings handling
- echo " Invalid grace strings test"
- ! $LFS setquota -t -u $GR_STR4 $GR_STR5 $DIR
- ! $LFS setquota -t -g $GR_STR4 $GR_STR6 $DIR
-
- # cleanup
- $LFS setquota -t -u $MAX_DQ_TIME $MAX_IQ_TIME $DIR
- $LFS setquota -t -g $MAX_DQ_TIME $MAX_IQ_TIME $DIR
+ GR_STR1="1w3d"
+ GR_STR2="1000s"
+ GR_STR3="5s"
+ GR_STR4="1w2d3h4m5s"
+ GR_STR5="5c"
+ GR_STR6="1111111111111111"
+
+ wait_delete_completed
+
+ # test of valid grace strings handling
+ echo " Valid grace strings test"
+ $LFS setquota -t -u --block-grace $GR_STR1 --inode-grace $GR_STR2 $DIR
+ $LFS quota -u -t $DIR | grep "Block grace time: $GR_STR1"
+ $LFS setquota -t -g --block-grace $GR_STR3 --inode-grace $GR_STR4 $DIR
+ $LFS quota -g -t $DIR | grep "Inode grace time: $GR_STR4"
+
+ # test of invalid grace strings handling
+ echo " Invalid grace strings test"
+ ! $LFS setquota -t -u --block-grace $GR_STR4 --inode-grace $GR_STR5 $DIR
+ ! $LFS setquota -t -g --block-grace $GR_STR4 --inode-grace $GR_STR6 $DIR
+
+ # cleanup
+ $LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace $MAX_IQ_TIME $DIR
+ $LFS setquota -t -g --block-grace $MAX_DQ_TIME --inode-grace $MAX_IQ_TIME $DIR
}
-run_test 4b "Grace time strings handling ==="
+run_test_with_stat 4b "Grace time strings handling ==="
# chown & chgrp (chown & chgrp successfully even out of block/file quota)
test_5() {
mkdir -p $DIR/$tdir
BLIMIT=$(( $BUNIT_SZ * $((OSTCOUNT + 1)) * 10)) # 10 bunits on each server
ILIMIT=$(( $IUNIT_SZ * 10 )) # 10 iunits on mds
-
+
+ wait_delete_completed
+
echo " Set quota limit (0 $BLIMIT 0 $ILIMIT) for $TSTUSR.$TSTUSR"
- $LFS setquota -u $TSTUSR 0 $BLIMIT 0 $ILIMIT $DIR
- $LFS setquota -g $TSTUSR 0 $BLIMIT 0 $ILIMIT $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B $BLIMIT -i 0 -I $ILIMIT $DIR
+ $LFS setquota -g $TSTUSR -b 0 -B $BLIMIT -i 0 -I $ILIMIT $DIR
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
-
+
echo " Create more than $ILIMIT files and more than $BLIMIT kbytes ..."
createmany -m $DIR/$tdir/$tfile-0_ $((ILIMIT + 1)) || \
error "touch failure, expect success"
# cleanup
unlinkmany $DIR/$tdir/$tfile-0_ $((ILIMIT + 1))
+ sync; sleep 3; sync;
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR
- $LFS setquota -g $TSTUSR 0 0 0 0 $DIR
+ resetquota -u $TSTUSR
+ resetquota -g $TSTUSR
}
-run_test 5 "Chown & chgrp successfully even out of block/file quota ==="
+run_test_with_stat 5 "Chown & chgrp successfully even out of block/file quota ==="
# block quota acquire & release
test_6() {
return 0;
fi
+ wait_delete_completed
+
mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
LIMIT=$((BUNIT_SZ * (OSTCOUNT + 1) * 5)) # 5 bunits per server
FILEA="$DIR/$tdir/$tfile-0_a"
FILEB="$DIR/$tdir/$tfile-0_b"
-
+
echo " Set block limit $LIMIT kbytes to $TSTUSR.$TSTUSR"
- $LFS setquota -u $TSTUSR 0 $LIMIT 0 0 $DIR
- $LFS setquota -g $TSTUSR 0 $LIMIT 0 0 $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ $LFS setquota -g $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
chown $TSTUSR.$TSTUSR $FILEB
echo " Exceed quota limit ..."
- RUNDD="$RUNAS dd if=/dev/zero of=$FILEB bs=$BLK_SZ"
- $RUNDD count=$((LIMIT - BUNIT_SZ * OSTCOUNT)) || \
- error "write fileb failure, but expect success"
+ RUNDD="$RUNAS dd if=/dev/zero of=$FILEB bs=$BLK_SZ"
+ $RUNDD count=$((LIMIT - BUNIT_SZ * OSTCOUNT)) || \
+ error "write fileb failure, but expect success"
- sync; sleep 1; sync;
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
- $RUNDD seek=$LIMIT count=$((BUNIT_SZ * OSTCOUNT)) && \
- error "write fileb success, but expect EDQUOT"
- sync; sleep 1; sync;
+ cancel_lru_locks osc
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
+ $RUNDD seek=$LIMIT count=$((BUNIT_SZ * OSTCOUNT)) && \
+ error "write fileb success, but expect EDQUOT"
+ cancel_lru_locks osc
echo " Write to OST0 return EDQUOT"
# this write maybe cache write, ignore it's failure
- RUNDD="$RUNAS dd if=/dev/zero of=$FILEA bs=$BLK_SZ"
- $RUNDD count=$(($BUNIT_SZ * 2)) || true
- sync; sleep 1; sync;
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
- $RUNDD count=$((BUNIT_SZ * 2)) seek=$((BUNIT_SZ *2)) && \
- error "write filea success, but expect EDQUOT"
+ RUNDD="$RUNAS dd if=/dev/zero of=$FILEA bs=$BLK_SZ"
+ $RUNDD count=$(($BUNIT_SZ * 2)) || true
+ cancel_lru_locks osc
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
+ $RUNDD count=$((BUNIT_SZ * 2)) seek=$((BUNIT_SZ *2)) && \
+ error "write filea success, but expect EDQUOT"
echo " Remove fileb to let OST1 release quota"
rm -f $FILEB
- sync; sleep 10; sync; # need to allow journal commit for small fs
+ sync; sleep 10; sync; # need to allow journal commit for small fs
echo " Write to OST0"
$RUNDD count=$((LIMIT - BUNIT_SZ * OSTCOUNT)) || \
- error "write filea failure, expect success"
+ error "write filea failure, expect success"
echo " Done"
# cleanup
rm -f $FILEA
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR
- $LFS setquota -g $TSTUSR 0 0 0 0 $DIR
+ sync; sleep 3; sync;
+
+ resetquota -u $TSTUSR
+ resetquota -g $TSTUSR
return 0
}
-run_test 6 "Block quota acquire & release ========="
+run_test_with_stat 6 "Block quota acquire & release ========="
# quota recovery (block quota only by now)
test_7()
{
mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
- remote_mds && skip "remote mds" && return 0
- LIMIT=$(( $BUNIT_SZ * $(($OSTCOUNT + 1)) * 10)) # 10 bunits each sever
+ wait_delete_completed
+
+ LIMIT=$(( $BUNIT_SZ * $(($OSTCOUNT + 1)) ))
TESTFILE="$DIR/$tdir/$tfile-0"
-
- $LFS setquota -u $TSTUSR 0 $LIMIT 0 0 $DIR
-
+
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+
$LFS setstripe $TESTFILE -c 1
chown $TSTUSR.$TSTUSR $TESTFILE
echo " Write to OST0..."
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ || \
error "write failure, but expect success"
-
- #define OBD_FAIL_OBD_DQACQ 0x604
- echo 0x604 > /proc/sys/lustre/fail_loc
+
+ #define OBD_FAIL_OBD_DQACQ 0x604
+ lustre_fail mds 0x604
echo " Remove files on OST0"
rm -f $TESTFILE
- echo 0 > /proc/sys/lustre/fail_loc
+ lustre_fail mds 0
echo " Trigger recovery..."
OSC0_UUID="`$LCTL dl | awk '$3 ~ /osc/ { print $1 }'`"
# check limits
PATTERN="`echo $DIR | sed 's/\//\\\\\//g'`"
- TOTAL_LIMIT="`$LFS quota -u $TSTUSR $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $4 }'`"
+ TOTAL_LIMIT="`$LFS quota -v -u $TSTUSR $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $4 }'`"
[ $TOTAL_LIMIT -eq $LIMIT ] || error "total limits not recovery!"
echo " total limits = $TOTAL_LIMIT"
-
- OST0_UUID=`do_facet ost1 "$LCTL dl | grep -m1 obdfilter" | awk '{print $((NF-1))}'`
- [ -z "$OST0_UUID" ] && OST0_UUID=`do_facet ost1 "$LCTL dl | grep -m1 obdfilter" | awk '{print $((NF-1))}'`
+
+ OST0_UUID=`do_facet ost1 "$LCTL dl | grep -m1 obdfilter" | awk '{print $((NF-1))}'`
+ [ -z "$OST0_UUID" ] && OST0_UUID=`do_facet ost1 "$LCTL dl | grep -m1 obdfilter" | awk '{print $((NF-1))}'`
OST0_LIMIT="`$LFS quota -o $OST0_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $3 }'`"
[ $OST0_LIMIT -eq $BUNIT_SZ ] || error "high limits not released!"
echo " limits on $OST0_UUID = $OST0_LIMIT"
# cleanup
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR
+ resetquota -u $TSTUSR
}
-run_test 7 "Quota recovery (only block limit) ======"
+run_test_with_stat 7 "Quota recovery (only block limit) ======"
# run dbench with quota enabled
test_8() {
mkdir -p $DIR/$tdir
BLK_LIMIT=$((100 * 1024 * 1024)) # 100G
FILE_LIMIT=1000000
- DBENCH_LIB=${DBENCH_LIB:-/usr/lib/dbench}
-
- [ ! -d $DBENCH_LIB ] && skip "dbench not installed" && return 0
wait_delete_completed
-
+
echo " Set enough high limit for user: $TSTUSR"
- $LFS setquota -u $TSTUSR 0 $BLK_LIMIT 0 $FILE_LIMIT $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
echo " Set enough high limit for group: $TSTUSR"
- $LFS setquota -g $USER 0 $BLK_LIMIT 0 $FILE_LIMIT $DIR
+ $LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
- TGT=$DIR/$tdir/client.txt
- SRC=${SRC:-$DBENCH_LIB/client.txt}
- [ ! -e $TGT -a -e $SRC ] && echo "copying $SRC to $TGT" && cp $SRC $TGT
- SRC=$DBENCH_LIB/client_plain.txt
- [ ! -e $TGT -a -e $SRC ] && echo "copying $SRC to $TGT" && cp $SRC $TGT
-
- mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
- SAVE_PWD=$PWD
- cd $DIR/$tdir
local duration=""
[ "$SLOW" = "no" ] && duration=" -t 120"
- $RUNAS dbench -c client.txt 3 $duration
- RC=$?
- [ $RC -ne 0 ] && killall -9 dbench
-
- rm -f client.txt
+ $RUNAS bash rundbench -D $DIR/$tdir 3 $duration || error "dbench failed!"
+
sync; sleep 3; sync;
- cd $SAVE_PWD
- return $RC
+ return 0
}
-run_test 8 "Run dbench with quota enabled ==========="
+run_test_with_stat 8 "Run dbench with quota enabled ==========="
# run for fixing bug10707, it needs a big room. test for 64bit
KB=1024
GB=$((KB * 1024 * 1024))
-FSIZE=$((OSTCOUNT * 9 / 2))
# Use this as dd bs to decrease time
# inode->i_blkbits = min(PTLRPC_MAX_BRW_BITS+1, LL_MAX_BLKSIZE_BITS);
blksize=$((1 << 21)) # 2Mb
+size_file=$((GB * 9 / 2))
+# this check is just for test9 and test10
+OST0_MIN=4900000 #4.67G
+check_whether_skip () {
+ OST0_SIZE=`$LFS df $DIR | awk '/\[OST:0\]/ {print $4}'`
+ log "OST0_SIZE: $OST0_SIZE required: $OST0_MIN"
+ if [ $OST0_SIZE -lt $OST0_MIN ]; then
+ echo "WARN: OST0 has less than $OST0_MIN free, skip this test."
+ return 0
+ else
+ return 1
+ fi
+}
test_9() {
- chmod 0777 $DIR/$tdir
- lustrefs_size=`(echo 0; df -t lustre -P | awk '{print $4}') | tail -n 1`
- size_file=$((FSIZE * GB))
- echo "lustrefs_size:$lustrefs_size size_file:$((size_file / KB))"
- if [ $((lustrefs_size * KB)) -lt $size_file ]; then
- skip "less than $size_file bytes free"
- return 0;
- fi
-
- set_blk_unitsz $((1024 * 100))
- set_blk_tunesz $((1024 * 50))
+ check_whether_skip && return 0
- # set the D_QUOTA flag
- debugsave
- sysctl -w lnet.debug="+quota"
-
- TESTFILE="$DIR/$tdir/$tfile-0"
+ wait_delete_completed
- BLK_LIMIT=$((100 * KB * KB)) # 100G
- FILE_LIMIT=1000000
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
- echo " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for user: $TSTUSR"
- $LFS setquota -u $TSTUSR 0 $BLK_LIMIT 0 $FILE_LIMIT $DIR
- echo " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for group: $TSTUSR"
- $LFS setquota -g $TSTUSR 0 $BLK_LIMIT 0 $FILE_LIMIT $DIR
+ mkdir -p $DIR/$tdir
+ chmod 0777 $DIR/$tdir
+ TESTFILE="$DIR/$tdir/$tfile-0"
- echo " Set stripe"
- [ $OSTCOUNT -ge 2 ] && $LFS setstripe $TESTFILE -c $OSTCOUNT
- touch $TESTFILE
- chown $TSTUSR.$TSTUSR $TESTFILE
+ BLK_LIMIT=$((100 * KB * KB)) # 100G
+ FILE_LIMIT=1000000
+ echo " Set block limit $BLK_LIMIT kbytes to $TSTUSR.$TSTUSR"
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
+ log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for user: $TSTUSR"
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
+ log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for group: $TSTUSR"
+ $LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
- echo " Write the big file of $FSIZE G ..."
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$blksize count=$((size_file / blksize)) || \
- error "(usr) write $FSIZE G file failure, but expect success"
+ echo " Set stripe"
+ $LFS setstripe $TESTFILE -c 1
+ touch $TESTFILE
+ chown $TSTUSR.$TSTUSR $TESTFILE
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
- echo " delete the big file of $FSIZE G..."
- $RUNAS rm -f $TESTFILE
+ log " Write the big file of 4.5G ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$blksize count=$((size_file / blksize)) || \
+ error "(usr) write 4.5G file failure, but expect success"
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
- echo " write the big file of 2 G..."
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$blksize count=$((2 * GB / blksize)) || \
- error "(usr) write 2 G file failure, but expect seccess"
+ log " delete the big file of 4.5G..."
+ $RUNAS rm -f $TESTFILE
+ sync; sleep 3; sync;
- echo " delete the big file of 2 G..."
- $RUNAS rm -f $TESTFILE
- RC=$?
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
- set_blk_tunesz $BTUNE_SZ
- set_blk_unitsz $BUNIT_SZ
+ RC=$?
- debugrestore
- wait_delete_completed
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
- return $RC
+ return $RC
}
-run_test 9 "run for fixing bug10707(64bit) ==========="
+run_test_with_stat 9 "run for fixing bug10707(64bit) ==========="
# run for fixing bug10707, it need a big room. test for 32bit
+# 2.0 version does not support 32 bit qd_count, so such test is obsolete.
test_10() {
mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
- lustrefs_size=`(echo 0; df -t lustre -P | awk '{print $4}') | tail -n 1`
- size_file=$((FSIZE * GB))
- echo "lustrefs_size:$lustrefs_size size_file:$((size_file / KB))"
- if [ $((lustrefs_size * KB)) -lt $size_file ]; then
- skip "less than $size_file bytes free"
- return 0;
- fi
+ check_whether_skip && return 0
- sync; sleep 10; sync;
+ wait_delete_completed
- set_blk_unitsz $((1024 * 100))
- set_blk_tunesz $((1024 * 50))
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
- # set the D_QUOTA flag
- debugsave
- sysctl -w lnet.debug="+quota"
-
# make qd_count 32 bit
- sysctl -w lustre.fail_loc=0xA00
+ lustre_fail mds_ost 0xA00
TESTFILE="$DIR/$tdir/$tfile-0"
BLK_LIMIT=$((100 * KB * KB)) # 100G
FILE_LIMIT=1000000
- echo " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for user: $TSTUSR"
- $LFS setquota -u $TSTUSR 0 $BLK_LIMIT 0 $FILE_LIMIT $DIR
- echo " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for group: $TSTUSR"
- $LFS setquota -g $TSTUSR 0 $BLK_LIMIT 0 $FILE_LIMIT $DIR
-
+ log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for user: $TSTUSR"
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
+ log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for group: $TSTUSR"
+ $LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
+
echo " Set stripe"
- [ $OSTCOUNT -ge 2 ] && $LFS setstripe $TESTFILE -c $OSTCOUNT
+ $LFS setstripe $TESTFILE -c 1
touch $TESTFILE
chown $TSTUSR.$TSTUSR $TESTFILE
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
-
- echo " Write the big file of $FSIZE G ..."
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$blksize count=$((size_file / blksize)) || \
- error "(usr) write $FSIZE G file failure, but expect success"
-
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
- echo " delete the big file of $FSIZE G..."
- $RUNAS rm -f $TESTFILE
+ log " Write the big file of 4.5 G ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$blksize count=$((size_file / blksize)) || \
+ error "(usr) write 4.5 G file failure, but expect success"
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
- echo " write the big file of 2 G..."
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$blksize count=$((2 * GB / blkzise)) || \
- error "(usr) write 2 G file failure, but expect success"
+ log " delete the big file of 4.5 G..."
+ $RUNAS rm -f $TESTFILE
+ sync; sleep 3; sync;
- echo " delete the big file of 2 G..."
- $RUNAS rm -f $TESTFILE
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
RC=$?
- # clear the flage
- debugrestore
-
# make qd_count 64 bit
- sysctl -w lustre.fail_loc=0
+ lustre_fail mds_ost 0
- set_blk_tunesz $BTUNE_SZ
- set_blk_unitsz $BUNIT_SZ
-
- wait_delete_completed
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
return $RC
}
-run_test 10 "run for fixing bug10707(32bit) ==========="
+#run_test_with_stat 10 "run for fixing bug10707(32bit) ==========="
test_11() {
wait_delete_completed
#prepare the test
block_limit=`(echo 0; df -t lustre -P | awk '{print $(NF - 4)}') | tail -n 1`
echo $block_limit
- orig_dbr=`cat /proc/sys/vm/dirty_background_ratio`
- orig_dec=`cat /proc/sys/vm/dirty_expire_centisecs`
- orig_dr=`cat /proc/sys/vm/dirty_ratio`
- orig_dwc=`cat /proc/sys/vm/dirty_writeback_centisecs`
- echo 1 > /proc/sys/vm/dirty_background_ratio
- echo 30 > /proc/sys/vm/dirty_expire_centisecs
- echo 1 > /proc/sys/vm/dirty_ratio
- echo 50 > /proc/sys/vm/dirty_writeback_centisecs
+ orig_dbr=`sysctl -n vm.dirty_background_ratio`
+ orig_dec=`sysctl -n vm.dirty_expire_centisecs`
+ orig_dr=`sysctl -n vm.dirty_ratio`
+ orig_dwc=`sysctl -n vm.dirty_writeback_centisecs`
+ sysctl -w vm.dirty_background_ratio=1
+ sysctl -w vm.dirty_expire_centisecs=30
+ sysctl -w vm.dirty_ratio=1
+ sysctl -w vm.dirty_writeback_centisecs=50
TESTDIR="$DIR/$tdir"
local RV=0
echo -n " create a file for uid "
for j in `seq 1 30`; do
echo -n "$j "
- # 30MB per dd for a total of 900MB (if space even permits)
+ # 30MB per dd for a total of 900MB (if space even permits)
runas -u $j dd if=/dev/zero of=$TESTDIR/$tfile bs=$blksize count=15 > /dev/null 2>&1 &
done
echo ""
RV=2
break
fi
- LAST_USED=$USED
+ LAST_USED=$USED
done
echo " removing the test files..."
rm -f $TESTDIR/$tfile
echo "Test took $SECS sec"
#clean
- echo $orig_dbr > /proc/sys/vm/dirty_background_ratio
- echo $orig_dec > /proc/sys/vm/dirty_expire_centisecs
- echo $orig_dr > /proc/sys/vm/dirty_ratio
- echo $orig_dwc > /proc/sys/vm/dirty_writeback_centisecs
+ sysctl -w vm.dirty_background_ratio=$orig_dbr
+ sysctl -w vm.dirty_expire_centisecs=$orig_dec
+ sysctl -w vm.dirty_ratio=$orig_dr
+ sysctl -w vm.dirty_writeback_centisecs=$orig_dwc
if [ $RV -ne 0 ]; then
- error "Nothing was written for $SECS sec ... aborting"
+ error "Nothing was written for $SECS sec ... aborting"
fi
return $RV
}
-run_test 11 "run for fixing bug10912 ==========="
+run_test_with_stat 11 "run for fixing bug10912 ==========="
# test a deadlock between quota and journal b=11693
[ "$(grep $DIR2 /proc/mounts)" ] || mount_client $DIR2 || \
{ skip "Need lustre mounted on $MOUNT2 " && retutn 0; }
+ if [ $OSTCOUNT -lt 2 ]; then
+ skip "$OSTCOUNT < 2, too few osts"
+ return 0;
+ fi
+
LIMIT=$(( $BUNIT_SZ * $(($OSTCOUNT + 1)) * 10)) # 10 bunits each sever
TESTFILE="$DIR/$tdir/$tfile-0"
TESTFILE2="$DIR2/$tdir/$tfile-1"
-
+
+ wait_delete_completed
+
echo " User quota (limit: $LIMIT kbytes)"
- $LFS setquota -u $TSTUSR 0 $LIMIT 0 0 $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
- $LFS setstripe $TESTFILE -i 0 -c 1
+ $LFS setstripe $TESTFILE -i 0 -c 1
chown $TSTUSR.$TSTUSR $TESTFILE
- $LFS setstripe $TESTFILE2 -i 0 -c 1
- chown $TSTUSR2.$TSTUSR2 $TESTFILE2
+ $LFS setstripe $TESTFILE2 -i 1 -c 1
+ chown $TSTUSR2.$TSTUSR2 $TESTFILE2
#define OBD_FAIL_OST_HOLD_WRITE_RPC 0x21f
- sysctl -w lustre.fail_loc=0x0000021f
+ lustre_fail ost 0x0000021f
echo " step1: write out of block quota ..."
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT*2)) &
- DDPID=$!
- sleep 5
- $RUNAS2 dd if=/dev/zero of=$TESTFILE2 bs=$BLK_SZ count=102400 &
+ $RUNAS2 dd if=/dev/zero of=$TESTFILE2 bs=$BLK_SZ count=102400 &
DDPID1=$!
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT*2)) &
+ DDPID=$!
echo " step2: testing ......"
count=0
while [ true ]; do
- if [ -z `ps -ef | awk '$2 == '${DDPID1}' { print $8 }'` ]; then break; fi
+ if ! ps -p ${DDPID1} > /dev/null 2>&1; then break; fi
count=$[count+1]
if [ $count -gt 64 ]; then
- sysctl -w lustre.fail_loc=0
+ lustre_fail ost 0
error "dd should be finished!"
fi
sleep 1
- done
+ done
echo "(dd_pid=$DDPID1, time=$count)successful"
#Recover fail_loc and dd will finish soon
- sysctl -w lustre.fail_loc=0
+ lustre_fail ost 0
echo " step3: testing ......"
count=0
while [ true ]; do
- if [ -z `ps -ef | awk '$2 == '${DDPID}' { print $8 }'` ]; then break; fi
+ if ! ps -p ${DDPID} > /dev/null 2>&1; then break; fi
count=$[count+1]
- if [ $count -gt 100 ]; then
+ if [ $count -gt 150 ]; then
error "dd should be finished!"
fi
sleep 1
- done
+ done
echo "(dd_pid=$DDPID, time=$count)successful"
rm -f $TESTFILE $TESTFILE2
-
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR # clear user limit
+ sync; sleep 3; sync;
+
+ resetquota -u $TSTUSR
}
-run_test 12 "test a deadlock between quota and journal ==="
+run_test_with_stat 12 "test a deadlock between quota and journal ==="
# test multiple clients write block quota b=11693
test_13() {
+ mkdir -p $DIR/$tdir
+ wait_delete_completed
+
# one OST * 10 + (mds + other OSTs)
LIMIT=$((BUNIT_SZ * 10 + (BUNIT_SZ * OSTCOUNT)))
TESTFILE="$DIR/$tdir/$tfile"
- mkdir -p $DIR/$tdir
echo " User quota (limit: $LIMIT kbytes)"
- $LFS setquota -u $TSTUSR 0 $LIMIT 0 0 $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
$SHOW_QUOTA_USER
-
+
$LFS setstripe $TESTFILE -i 0 -c 1
chown $TSTUSR.$TSTUSR $TESTFILE
$LFS setstripe $TESTFILE.2 -i 0 -c 1
- chown $TSTUSR.$TSTUSR $TESTFILE.2
+ chown $TSTUSR.$TSTUSR $TESTFILE.2
echo " step1: write out of block quota ..."
# one bunit will give mds
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$[($LIMIT - $BUNIT_SZ) / 2] &
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$[($LIMIT - $BUNIT_SZ) / 2] &
DDPID=$!
- $RUNAS dd if=/dev/zero of=$TESTFILE.2 bs=$BLK_SZ count=$[($LIMIT - $BUNIT_SZ) / 2] &
+ $RUNAS dd if=/dev/zero of=$TESTFILE.2 bs=$BLK_SZ count=$[($LIMIT - $BUNIT_SZ) / 2] &
DDPID1=$!
echo " step2: testing ......"
count=0
while [ true ]; do
- if [ -z `ps -ef | awk '$2 == '${DDPID}' { print $8 }'` ]; then break; fi
+ if ! ps -p ${DDPID} > /dev/null 2>&1; then break; fi
count=$[count+1]
if [ $count -gt 64 ]; then
error "dd should be finished!"
fi
sleep 1
- done
+ done
echo "(dd_pid=$DDPID, time=$count)successful"
count=0
while [ true ]; do
- if [ -z `ps -ef | awk '$2 == '${DDPID1}' { print $8 }'` ]; then break; fi
+ if ! ps -p ${DDPID1} > /dev/null 2>&1 ; then break; fi
count=$[count+1]
if [ $count -gt 64 ]; then
error "dd should be finished!"
fi
sleep 1
- done
+ done
echo "(dd_pid=$DDPID1, time=$count)successful"
sync; sleep 5; sync;
error "files too small $fz + $fz2 < $((BUNIT_SZ * BLK_SZ * 10))"
rm -f $TESTFILE $TESTFILE.2
-
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR # clear user limit
+ sync; sleep 3; sync;
+
+ resetquota -u $TSTUSR
}
-run_test 13 "test multiple clients write block quota ==="
+run_test_with_stat 13 "test multiple clients write block quota ==="
check_if_quota_zero(){
- line=`$LFS quota -$1 $2 $DIR | wc -l`
+ line=`$LFS quota -v -$1 $2 $DIR | wc -l`
for i in `seq 3 $line`; do
if [ $i -eq 3 ]; then
field="3 4 6 7"
field="3 5"
fi
for j in $field; do
- tmp=`$LFS quota -$1 $2 $DIR | sed -n ${i}p |
- awk '{print $'"$j"'}'`
- [ -n "$tmp" ] && [ $tmp -ne 0 ] && $LFS quota -$1 $2 $DIR && \
+ tmp=`$LFS quota -v -$1 $2 $DIR | sed -n ${i}p |
+ awk '{print $'"$j"'}'`
+ [ -n "$tmp" ] && [ $tmp -ne 0 ] && $LFS quota -v -$1 $2 $DIR && \
error "quota on $2 isn't clean"
done
done
echo "pass check_if_quota_zero"
}
-pre_test_14 () {
- # reboot the lustre
- cd $T_PWD; sh llmountcleanup.sh || error "llmountcleanup failed"
- sh llmount.sh
- pre_test
- run_test 0 "reboot lustre"
-}
-
-pre_test_14
-
test_14a() { # was test_14 b=12223 -- setting quota on root
TESTFILE="$DIR/$tdir/$tfile"
+
+ # reboot the lustre
+ sync; sleep 5; sync
+ cleanup_and_setup_lustre
+ test_0
+
mkdir -p $DIR/$tdir
# out of root's file and block quota
- $LFS setquota -u root 10 10 10 10 $DIR
+ $LFS setquota -u root -b 10 -B 10 -i 10 -I 10 $DIR
createmany -m ${TESTFILE} 20 || \
error "unexpected: user(root) create files failly!"
dd if=/dev/zero of=$TESTFILE bs=4k count=4096 || \
error "unexpected: user(root) write files failly!"
chmod 666 $TESTFILE
$RUNAS dd if=/dev/zero of=${TESTFILE} seek=4096 bs=4k count=4096 && \
- error "unexpected: user(quota_usr) write a file successfully!"
+ error "unexpected: user(quota_usr) write a file successfully!"
# trigger the llog
chmod 777 $DIR
- for i in `seq 1 10`; do $RUNAS touch ${TESTFILE}a_$i; done
- for i in `seq 1 10`; do $RUNAS rm -f ${TESTFILE}a_$i; done
+ for i in `seq 1 10`; do $RUNAS touch ${TESTFILE}a_$i; done
+ for i in `seq 1 10`; do $RUNAS rm -f ${TESTFILE}a_$i; done
# do the check
- dmesg | tail | grep "\-122" |grep llog_obd_origin_add && error "err -122 not found in dmesg"
- $LFS setquota -u root 0 0 0 0 $DIR
+ dmesg | tail | grep "\-122" |grep llog_obd_origin_add && error "err -122 not found in dmesg"
+ resetquota -u root
#check_if_quota_zero u root
- # clean
+ # clean
unlinkmany ${TESTFILE} 15
rm -f $TESTFILE
+ sync; sleep 3; sync;
}
-run_test 14a "test setting quota on root ==="
+run_test_with_stat 14a "test setting quota on root ==="
+
+# save quota version (both administrative and operational quotas)
+quota_save_version() {
+ do_facet mgs "lctl conf_param ${FSNAME}-MDT*.mdd.quota_type=$1"
+ do_facet mgs "lctl conf_param ${FSNAME}-OST*.ost.quota_type=$1"
+ sleep 5
+}
+
+test_15(){
+ LIMIT=$((24 * 1024 * 1024 * 1024 * 1024)) # 24 TB
+ PATTERN="`echo $DIR | sed 's/\//\\\\\//g'`"
+
+ wait_delete_completed
+
+ # test for user
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ TOTAL_LIMIT="`$LFS quota -v -u $TSTUSR $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $4 }'`"
+ [ $TOTAL_LIMIT -eq $LIMIT ] || error " (user)total limits = $TOTAL_LIMIT; limit = $LIMIT, failed!"
+ echo " (user)total limits = $TOTAL_LIMIT; limit = $LIMIT, successful!"
+ resetquota -u $TSTUSR
+
+ # test for group
+ $LFS setquota -g $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ TOTAL_LIMIT="`$LFS quota -v -g $TSTUSR $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $4 }'`"
+ [ $TOTAL_LIMIT -eq $LIMIT ] || error " (group)total limits = $TOTAL_LIMIT; limit = $LIMIT, failed!"
+ echo " (group)total limits = $TOTAL_LIMIT; limit = $LIMIT, successful!"
+ resetquota -g $TSTUSR
+ $LFS quotaoff -ug $DIR
+ do_facet $SINGLEMDS "lctl set_param lquota.mdd_obd-${FSNAME}-MDT*.quota_type=ug" | grep "error writing" && \
+ error "fail to set version for $SINGLEMDS"
+ for j in `seq $OSTCOUNT`; do
+ do_facet ost$j "lctl set_param lquota.${FSNAME}-OST*.quota_type=ug" | grep "error writing" && \
+ error "fail to set version for ost$j"
+ done
+
+ echo "invalidating quota files"
+ $LFS quotainv -ug $DIR
+ $LFS quotainv -ugf $DIR
+ $LFS quotacheck -ug $DIR
+}
+run_test_with_stat 15 "set block quota more than 4T ==="
+
+# $1=u/g $2=with qunit adjust or not
+test_16_tub() {
+ LIMIT=$(( $BUNIT_SZ * $(($OSTCOUNT + 1)) * 4))
+ TESTFILE="$DIR/$tdir/$tfile"
+ mkdir -p $DIR/$tdir
+
+ wait_delete_completed
+
+ echo " User quota (limit: $LIMIT kbytes)"
+ if [ $1 == "u" ]; then
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ $SHOW_QUOTA_USER
+ else
+ $LFS setquota -g $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ $SHOW_QUOTA_GROUP
+ fi
+
+ $LFS setstripe $TESTFILE -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
+ echo " Write ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$((BUNIT_SZ * 4)) || \
+ error "(usr) write failure, but expect success"
+ echo " Done"
+ echo " Write out of block quota ..."
+ # this time maybe cache write, ignore it's failure
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$((BUNIT_SZ * 4)) || true
+ # flush cache, ensure noquota flag is setted on client
+ cancel_lru_locks osc
+ if [ $2 -eq 1 ]; then
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$((BUNIT_SZ * 4)) || \
+ error "(write failure, but expect success"
+ else
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$((BUNIT_SZ * 4)) && \
+ error "(write success, but expect EDQUOT"
+ fi
+
+ rm -f $TESTFILE
+ sync; sleep 3; sync;
+ resetquota -$1 $TSTUSR
+}
+
+# test without adjusting qunit
+# 2.0 version does not support WITHOUT_CHANGE_QS, so such test is obsolete
+test_16 () {
+ set_blk_tunesz $((BUNIT_SZ * 2))
+ set_blk_unitsz $((BUNIT_SZ * 4))
+ for i in u g; do
+ for j in 0 1; do
+ # define OBD_FAIL_QUOTA_WITHOUT_CHANGE_QS 0xA01
+ echo " grp/usr: $i, adjust qunit: $j"
+ echo "-------------------------------"
+ [ $j -eq 1 ] && lustre_fail mds_ost 0
+ [ $j -eq 0 ] && lustre_fail mds_ost 0xA01
+ test_16_tub $i $j
+ done
+ done
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+}
+#run_test_with_stat 16 "test without adjusting qunit"
+
+# run for fixing bug14526, failed returned quota reqs shouldn't ruin lustre.
+test_17() {
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+
+ wait_delete_completed
+
+ #define OBD_FAIL_QUOTA_RET_QDATA | OBD_FAIL_ONCE
+ lustre_fail ost 0x80000A02
+
+ TESTFILE="$DIR/$tdir/$tfile-a"
+ TESTFILE2="$DIR/$tdir/$tfile-b"
+ mkdir -p $DIR/$tdir
+
+ BLK_LIMIT=$((100 * 1024)) # 100M
+
+ log " Set enough high limit(block:$BLK_LIMIT) for user: $TSTUSR"
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I 0 $DIR
+ log " Set enough high limit(block:$BLK_LIMIT) for group: $TSTUSR"
+ $LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I 0 $DIR
+
+ touch $TESTFILE
+ chown $TSTUSR.$TSTUSR $TESTFILE
+ touch $TESTFILE2
+ chown $TSTUSR.$TSTUSR $TESTFILE2
+
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
+
+ log " Write the test file1 ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(( 10 * 1024 )) \
+ || echo "write 10M file failure"
+
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
+
+ log " write the test file2 ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE2 bs=$BLK_SZ count=$(( 10 * 1024 )) \
+ || error "write 10M file failure"
+
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
+
+ rm -f $TESTFILE $TESTFILE2
+ RC=$?
+ sync; sleep 3; sync;
+
+ # make qd_count 64 bit
+ lustre_fail ost 0
+
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+
+ resetquota -u $TSTUSR
+ resetquota -g $TSTUSR
+
+ return $RC
+}
+run_test_with_stat 17 "run for fixing bug14526 ==========="
+
+# test when mds takes a long time to handle a quota req so that
+# the ost has dropped it, the ost still could work well b=14840
+test_18() {
+ LIMIT=$((100 * 1024 * 1024)) # 100G
+ TESTFILE="$DIR/$tdir/$tfile"
+ mkdir -p $DIR/$tdir
+
+ wait_delete_completed
+
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+
+ log " User quota (limit: $LIMIT kbytes)"
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $MOUNT
+ $SHOW_QUOTA_USER
+
+ $LFS setstripe $TESTFILE -i 0 -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
+ #define OBD_FAIL_MDS_BLOCK_QUOTA_REQ 0x13c
+ lustre_fail mds 0x13c
+
+ log " step1: write 100M block ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$((1024 * 100)) &
+ DDPID=$!
+
+ sleep 5
+ lustre_fail mds 0
+
+ echo " step2: testing ......"
+ count=0
+ if at_is_valid && at_is_enabled; then
+ timeout=$(at_max_get mds)
+ else
+ timeout=$(lctl get_param -n timeout)
+ fi
+ while [ true ]; do
+ if ! ps -p ${DDPID} > /dev/null 2>&1; then break; fi
+ count=$[count+1]
+ if [ $count -gt $((4 * $timeout)) ]; then
+ error "count=$count dd should be finished!"
+ fi
+ sleep 1
+ done
+ log "(dd_pid=$DDPID, time=$count, timeout=$timeout)"
+
+ testfile_size=$(stat -c %s $TESTFILE)
+ [ $testfile_size -ne $((BLK_SZ * 1024 * 100)) ] && \
+ error "expect $((BLK_SZ * 1024 * 100)), got ${testfile_size}. Verifying file failed!"
+ rm -f $TESTFILE
+ sync; sleep 3; sync;
+
+ resetquota -u $TSTUSR
+
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+}
+run_test_with_stat 18 "run for fixing bug14840 ==========="
+
+# test when mds drops a quota req, the ost still could work well b=14840
+test_18a() {
+ LIMIT=$((100 * 1024 * 1024)) # 100G
+ TESTFILE="$DIR/$tdir/$tfile-a"
+ mkdir -p $DIR/$tdir
+
+ wait_delete_completed
+
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+
+ log " User quota (limit: $LIMIT kbytes)"
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $MOUNT
+ $SHOW_QUOTA_USER
+
+ $LFS setstripe $TESTFILE -i 0 -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
+ #define OBD_FAIL_MDS_DROP_QUOTA_REQ | OBD_FAIL_ONCE 0x8000013d
+ lustre_fail mds 0x8000013d
+
+ log " step1: write 100M block ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$((1024 * 100)) &
+ DDPID=$!
+
+ echo " step2: testing ......"
+ count=0
+ if at_is_valid && at_is_enabled; then
+ timeout=$(at_max_get mds)
+ else
+ timeout=$(lctl get_param -n timeout)
+ fi
+ while [ true ]; do
+ if ! ps -p ${DDPID} > /dev/null 2>&1; then break; fi
+ count=$[count+1]
+ if [ $count -gt $((6 * $timeout)) ]; then
+ lustre_fail mds 0
+ error "count=$count dd should be finished!"
+ fi
+ sleep 1
+ done
+ log "(dd_pid=$DDPID, time=$count, timeout=$timeout)"
+
+ lustre_fail mds 0
+
+ rm -f $TESTFILE
+ sync; sleep 3; sync;
+
+ resetquota -u $TSTUSR
+
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+}
+run_test_with_stat 18a "run for fixing bug14840 ==========="
+
+# test when mds do failover, the ost still could work well without trigger
+# watchdog b=14840
+test_18bc_sub() {
+ type=$1
+
+ LIMIT=$((110 * 1024 )) # 110M
+ TESTFILE="$DIR/$tdir/$tfile"
+ mkdir -p $DIR/$tdir
+
+ wait_delete_completed
+
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+
+ log " User quota (limit: $LIMIT kbytes)"
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $MOUNT
+ $SHOW_QUOTA_USER
+
+ $LFS setstripe $TESTFILE -i 0 -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
+ timeout=$(sysctl -n lustre.timeout)
+
+ if [ $type = "directio" ]; then
+ log " write 100M block(directio) ..."
+ $RUNAS $DIRECTIO write $TESTFILE 0 100 $((BLK_SZ * 1024)) &
+ else
+ log " write 100M block(normal) ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$((BLK_SZ * 1024)) count=100 &
+ fi
+
+ DDPID=$!
+ do_facet $SINGLEMDS "$LCTL conf_param ${FSNAME}-MDT*.mdd.quota_type=ug"
+
+ log "failing mds for $((2 * timeout)) seconds"
+ fail $SINGLEMDS $((2 * timeout))
+
+ # check if quotaon successful
+ $LFS quota -u $TSTUSR $MOUNT 2>&1 | grep -q "quotas are not enabled"
+ if [ $? -eq 0 ]; then
+ error "quotaon failed!"
+ rm -rf $TESTFILE
+ return
+ fi
+
+ count=0
+ if at_is_valid && at_is_enabled; then
+ timeout=$(at_max_get mds)
+ else
+ timeout=$(lctl get_param -n timeout)
+ fi
+ while [ true ]; do
+ if ! ps -p ${DDPID} > /dev/null 2>&1; then break; fi
+ if [ $((++count % (2 * timeout) )) -eq 0 ]; then
+ log "it took $count second"
+ fi
+ sleep 1
+ done
+ log "(dd_pid=$DDPID, time=$count, timeout=$timeout)"
+ sync; sleep 1; sync
+
+ testfile_size=$(stat -c %s $TESTFILE)
+ [ $testfile_size -ne $((BLK_SZ * 1024 * 100)) ] && \
+ error "expect $((BLK_SZ * 1024 * 100)), got ${testfile_size}. Verifying file failed!"
+ $SHOW_QUOTA_USER
+ resetquota -u $TSTUSR
+ rm -rf $TESTFILE
+ sync; sleep 1; sync
+}
+
+# test when mds does failover, the ost still could work well
+# this test shouldn't trigger watchdog b=14840
+test_18b() {
+ test_18bc_sub normal
+ test_18bc_sub directio
+ # check if watchdog is triggered
+ do_facet ost1 dmesg > $TMP/lustre-log-${TESTNAME}.log
+ watchdog=`awk '/test 18b/ {start = 1;}
+ /Watchdog triggered/ {
+ if (start) {
+ print;
+ }
+ }' $TMP/lustre-log-${TESTNAME}.log`
+ [ `echo "$watchdog" | wc -l` -ge 3 ] && error "$watchdog"
+ rm -f $TMP/lustre-log-${TESTNAME}.log
+}
+run_test_with_stat 18b "run for fixing bug14840(mds failover, no watchdog) ==========="
+
+# test when mds does failover, the ost still could work well
+# this test will prevent OST_DISCONNET from happening b=14840
+test_18c() {
+ # define OBD_FAIL_OST_DISCONNECT_NET 0x202(disable ost_disconnect for osts)
+ lustre_fail ost 0x202
+ test_18bc_sub normal
+ test_18bc_sub directio
+ lustre_fail ost 0
+}
+run_test_with_stat 18c "run for fixing bug14840(mds failover, OST_DISCONNECT is disabled) ==========="
+
+run_to_block_limit() {
+ local LIMIT=$((($OSTCOUNT + 1) * $BUNIT_SZ))
+ local TESTFILE=$1
+ wait_delete_completed
+
+ # set 1 Mb quota unit size
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+
+ # bind file to a single OST
+ $LFS setstripe -c 1 $TESTFILE
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
+ echo " User quota (limit: $LIMIT kbytes)"
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $MOUNT
+ $SHOW_QUOTA_USER
+ echo " Updating quota limits"
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $MOUNT
+ $SHOW_QUOTA_USER
+
+ RUNDD="$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ"
+ $RUNDD count=$BUNIT_SZ || error "(usr) write failure, but expect success"
+ # for now page cache of TESTFILE may still be dirty,
+ # let's push it to the corresponding OST, this will also
+ # cache NOQUOTA on the client from OST's reply
+ cancel_lru_locks osc
+ $RUNDD seek=$BUNIT_SZ && error "(usr) write success, should be EDQUOT"
+}
+
+test_19() {
+ # 1 Mb bunit per each MDS/OSS
+ local TESTFILE="$DIR/$tdir/$tfile"
+ mkdir -p $DIR/$tdir
+
+ run_to_block_limit $TESTFILE
+ $SHOW_QUOTA_USER
+
+ # cleanup
+ rm -f $TESTFILE
+ resetquota -u $TSTUSR
+
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+
+}
+run_test_with_stat 19 "test if administrative limits updates do not zero operational limits (14790) ==="
+
+test_20()
+{
+ LSTR=(1t 2g 3m 4k) # limits strings
+ LVAL=($[1*1024*1024*1024] $[2*1024*1024] $[3*1024*1024] $[4*1024]) # limits values
+
+ $LFS setquota -u $TSTUSR --block-softlimit ${LSTR[0]} \
+ $MOUNT || error "could not set quota limits"
+
+ $LFS setquota -u $TSTUSR --block-hardlimit ${LSTR[1]} \
+ --inode-softlimit ${LSTR[2]} \
+ --inode-hardlimit ${LSTR[3]} \
+ $MOUNT || error "could not set quota limits"
+
+ ($LFS quota -v -u $TSTUSR $MOUNT | \
+ grep -E '^ *'$MOUNT' *[0-9]+\** *'${LVAL[0]}' *'${LVAL[1]}' *[0-9]+\** *'${LVAL[2]}' *'${LVAL[3]}) \
+ || error "lfs quota output is unexpected"
+
+ resetquota -u $TSTUSR
+}
+run_test_with_stat 20 "test if setquota specifiers work properly (15754)"
+
+test_21_sub() {
+ local testfile=$1
+ local blk_number=$2
+ local seconds=$3
+
+ time=$(($(date +%s) + seconds))
+ while [ $(date +%s) -lt $time ]; do
+ $RUNAS dd if=/dev/zero of=$testfile bs=$BLK_SZ count=$blk_number > /dev/null 2>&1
+ rm -f $testfile
+ done
+}
+
+# run for fixing bug16053, setquota shouldn't fail when writing and
+# deleting are happening
+test_21() {
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+
+ wait_delete_completed
+
+ TESTFILE="$DIR/$tdir/$tfile"
+
+ BLK_LIMIT=$((10 * 1024 * 1024)) # 10G
+ FILE_LIMIT=1000000
+
+ log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for user: $TSTUSR"
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $MOUNT
+ log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for group: $TSTUSR"
+ $LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $MOUNT
+
+ # repeat writing on a 1M file
+ test_21_sub ${TESTFILE}_1 1024 30 &
+ DDPID1=$!
+ # repeat writing on a 128M file
+ test_21_sub ${TESTFILE}_2 $((1024 * 128)) 30 &
+ DDPID2=$!
+
+ time=$(($(date +%s) + 30))
+ i=1
+ while [ $(date +%s) -lt $time ]; do
+ log " Set quota for $i times"
+ $LFS setquota -u $TSTUSR -b 0 -B $((BLK_LIMIT + 1024 * i)) -i 0 -I $((FILE_LIMIT + i)) $MOUNT
+ $LFS setquota -g $TSTUSR -b 0 -B $((BLK_LIMIT + 1024 * i)) -i 0 -I $((FILE_LIMIT + i)) $MOUNT
+ i=$((i+1))
+ sleep 1
+ done
+
+ count=0
+ while [ true ]; do
+ if ! ps -p ${DDPID1} > /dev/null 2>&1; then break; fi
+ count=$[count+1]
+ if [ $count -gt 60 ]; then
+ error "dd should be finished!"
+ fi
+ sleep 1
+ done
+ echo "(dd_pid=$DDPID1, time=$count)successful"
+
+ count=0
+ while [ true ]; do
+ if ! ps -p ${DDPID2} > /dev/null 2>&1; then break; fi
+ count=$[count+1]
+ if [ $count -gt 60 ]; then
+ error "dd should be finished!"
+ fi
+ sleep 1
+ done
+ echo "(dd_pid=$DDPID2, time=$count)successful"
+
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+ resetquota -u $TSTUSR
+ resetquota -g $TSTUSR
+
+ return $RC
+}
+run_test_with_stat 21 "run for fixing bug16053 ==========="
+
+test_22() {
+ local SAVEREFORMAT
+
+ SAVEREFORMAT=$REFORMAT
+ $LFS quotaoff -ug $DIR || error "could not turn quotas off"
+
+ quota_save_version "ug"
+
+ REFORMAT="reformat"
+ stopall
+ mount
+ setupall
+ REFORMAT=$SAVEREFORMAT
+
+ echo "checking parameters"
+
+ do_facet $SINGLEMDS "lctl get_param mdd.${FSNAME}-MDT*.quota_type" | grep "ug" || error "admin failure"
+ do_facet ost1 "lctl get_param obdfilter.*.quota_type" | grep "ug" || error "op failure"
+
+ run_test 0 "reboot lustre"
+}
+run_test_with_stat 22 "test if quota_type saved as permanent parameter ===="
+
+test_23_sub() {
+ mkdir -p $DIR/$tdir
+ chmod 0777 $DIR/$tdir
+ TESTFILE="$DIR/$tdir/$tfile-0"
+ rm -f $TESTFILE
+ local bs_unit=$((1024*1024))
+ LIMIT=$1
+
+ wait_delete_completed
+
+ # test for user
+ log " User quota (limit: $LIMIT kbytes)"
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ sleep 3
+ $SHOW_QUOTA_USER
+
+ $LFS setstripe $TESTFILE -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
+ log " Step1: trigger quota with 0_DIRECT"
+ log " Write half of file"
+ $RUNAS $DIRECTIO write $TESTFILE 0 $(($LIMIT/1024/2)) $bs_unit || error "(1) write failure, but expect success: $LIMIT"
+ log " Write out of block quota ..."
+ $RUNAS $DIRECTIO write $TESTFILE $(($LIMIT/1024/2)) $(($LIMIT/1024/2)) $bs_unit && error "(2) write success, but expect EDQUOT: $LIMIT"
+ log " Step1: done"
+
+ log " Step2: rewrite should succeed"
+ $RUNAS $DIRECTIO write $TESTFILE $(($LIMIT/1024/2)) 1 $bs_unit || error "(3) write failure, but expect success: $LIMIT"
+ log " Step2: done"
+
+ rm -f $TESTFILE
+ wait_delete_completed
+ OST0_UUID=`do_facet ost1 $LCTL dl | grep -m1 obdfilter | awk '{print $((NF-1))}'`
+ OST0_QUOTA_USED=`$LFS quota -o $OST0_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ echo $OST0_QUOTA_USED
+ [ $OST0_QUOTA_USED -ne 0 ] && \
+ ($SHOW_QUOTA_USER; error "quota deleted isn't released")
+ $SHOW_QUOTA_USER
+ resetquota -u $TSTUSR
+}
+
+test_23() {
+ log "run for $((OSTCOUNT * 4))MB test file"
+ test_23_sub $((OSTCOUNT * 4 * 1024))
+
+ OST0_MIN=120000
+ check_whether_skip && return 0
+ log "run for $((OSTCOUNT * 40))MB test file"
+ test_23_sub $((OSTCOUNT * 40 * 1024))
+}
+run_test_with_stat 23 "run for fixing bug16125 ==========="
+
+test_24() {
+ local TESTFILE="$DIR/$tdir/$tfile"
+ mkdir -p $DIR/$tdir
+
+ run_to_block_limit $TESTFILE
+ $SHOW_QUOTA_USER | grep '*' || error "no matching *"
+
+ # cleanup
+ rm -f $TESTFILE
+ resetquota -u $TSTUSR
+
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+
+}
+run_test_with_stat 24 "test if lfs draws an asterix when limit is reached (16646) ==========="
+
+show_quota() {
+ if [ $1 = "-u" ]; then
+ if [ $2 = "$TSTUSR" ]; then
+ $SHOW_QUOTA_USER
+ else
+ $SHOW_QUOTA_USER2
+ fi
+ else
+ if [ $2 = "$TSTUSR" ]; then
+ $SHOW_QUOTA_GROUP
+ else
+ $SHOW_QUOTA_GROUP2
+ fi
+ fi
+}
+
+test_25_sub() {
+ mkdir -p $DIR/$tdir
+ chmod 0777 $DIR/$tdir
+ TESTFILE="$DIR/$tdir/$tfile-0"
+ rm -f $TESTFILE
+
+ wait_delete_completed
+
+ # set quota for $TSTUSR
+ log "setquota for $TSTUSR"
+ $LFS setquota $1 $TSTUSR -b 10240 -B 10240 -i 10 -I 10 $DIR
+ sleep 3
+ show_quota $1 $TSTUSR
+
+ # set quota for $TSTUSR2
+ log "setquota for $TSTUSR2"
+ $LFS setquota $1 $TSTUSR2 -b 10240 -B 10240 -i 10 -I 10 $DIR
+ sleep 3
+ show_quota $1 $TSTUSR2
+
+ # set stripe index to 0
+ log "setstripe for $DIR/$tdir to 0"
+ $LFS setstripe $DIR/$tdir -i 0
+ MDS_UUID=`do_facet $SINGLEMDS $LCTL dl | grep -m1 " mdt " | awk '{print $((NF-1))}'`
+ OST0_UUID=`do_facet ost1 $LCTL dl | grep -m1 obdfilter | awk '{print $((NF-1))}'`
+ MDS_QUOTA_USED_OLD=`$LFS quota -o $MDS_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ OST0_QUOTA_USED_OLD=`$LFS quota -o $OST0_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ MDS_QUOTA_USED2_OLD=`$LFS quota -o $MDS_UUID $1 $TSTUSR2 $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ OST0_QUOTA_USED2_OLD=`$LFS quota -o $OST0_UUID $1 $TSTUSR2 $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+
+ # TSTUSR write 4M
+ log "$TSTUSR write 4M to $TESTFILE"
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=4K count=1K || error "dd failed"
+ sync
+ show_quota $1 $TSTUSR
+ show_quota $1 $TSTUSR2
+ MDS_QUOTA_USED_NEW=`$LFS quota -o $MDS_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ [ $MDS_QUOTA_USED_NEW -ne $((MDS_QUOTA_USED_OLD + 1)) ] && \
+ error "$TSTUSR inode quota usage error: [$MDS_QUOTA_USED_OLD|$MDS_QUOTA_USED_NEW]"
+ OST0_QUOTA_USED_NEW=`$LFS quota -o $OST0_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ OST0_QUOTA_USED_DELTA=$((OST0_QUOTA_USED_NEW - OST0_QUOTA_USED_OLD))
+ [ $OST0_QUOTA_USED_DELTA -lt 4096 ] && \
+ error "$TSTUSR block quota usage error: [$OST0_QUOTA_USED_OLD|$OST0_QUOTA_USED_NEW]"
+
+ # chown/chgrp from $TSTUSR to $TSTUSR2
+ if [ $1 = "-u" ]; then
+ log "chown from $TSTUSR to $TSTUSR2"
+ chown $TSTUSR2 $TESTFILE || error "chown failed"
+ else
+ log "chgrp from $TSTUSR to $TSTUSR2"
+ chgrp $TSTUSR2 $TESTFILE || error "chgrp failed"
+ fi
+ sync
+ show_quota $1 $TSTUSR
+ show_quota $1 $TSTUSR2
+ MDS_QUOTA_USED2_NEW=`$LFS quota -o $MDS_UUID $1 $TSTUSR2 $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ [ $MDS_QUOTA_USED2_NEW -ne $((MDS_QUOTA_USED2_OLD + 1)) ] && \
+ error "$TSTUSR2 inode quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$MDS_QUOTA_USED2_OLD|$MDS_QUOTA_USED2_NEW]"
+ OST0_QUOTA_USED2_NEW=`$LFS quota -o $OST0_UUID $1 $TSTUSR2 $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ OST0_QUOTA_USED2_DELTA=$((OST0_QUOTA_USED2_NEW - OST0_QUOTA_USED2_OLD))
+ [ $OST0_QUOTA_USED2_DELTA -ne $OST0_QUOTA_USED_DELTA ] && \
+ error "$TSTUSR2 block quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$OST0_QUOTA_USED2_OLD|$OST0_QUOTA_USED2_NEW]"
+ MDS_QUOTA_USED_NEW=`$LFS quota -o $MDS_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ [ $MDS_QUOTA_USED_NEW -ne $MDS_QUOTA_USED_OLD ] && \
+ error "$TSTUSR inode quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$MDS_QUOTA_USED_OLD|$MDS_QUOTA_USED_NEW]"
+ OST0_QUOTA_USED_NEW=`$LFS quota -o $OST0_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ [ $OST0_QUOTA_USED_NEW -ne $OST0_QUOTA_USED_OLD ] && \
+ error "$TSTUSR block quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$OST0_QUOTA_USED_OLD|$OST0_QUOTA_USED_NEW]"
+
+ rm -f $TESTFILE
+ wait_delete_completed
+ resetquota $1 $TSTUSR
+ resetquota $1 $TSTUSR2
+}
+
+test_25() {
+ log "run for chown case"
+ test_25_sub -u
+
+ log "run for chgrp case"
+ test_25_sub -g
+}
+run_test_with_stat 25 "test whether quota usage is transfered when chown/chgrp (18081) ==========="
+
+# turn off quota
+test_99()
+{
+ $LFS quotaoff $DIR
+ lctl set_param debug="-quota"
-# turn off quota
-test_99()
-{
- $LFS quotaoff $DIR
return 0
}
-run_test 99 "Quota off ==============================="
+run_test_with_stat 99 "Quota off ==============================="
log "cleanup: ======================================================"
cd $ORIG_PWD
-post_test
check_and_cleanup_lustre
echo '=========================== finished ==============================='
[ -f "$QUOTALOG" ] && cat $QUOTALOG && grep -q FAIL $QUOTALOG && exit 1 || true
git://git.whamcloud.com / fs / lustre-release.git / blobdiff