MAX_DQ_TIME=604800
MAX_IQ_TIME=604800
QTYPE="ugp"
-# QP exists since this version. Should be finally set before landing.
VERSION_WITH_QP="2.13.53"
mds_supports_qp() {
[ $MDS1_VERSION -lt $(version_code $VERSION_WITH_QP) ] &&
quota_scan() {
local local_ugp=$1
local local_id=$2
+ local count
if [ "$local_ugp" == "a" -o "$local_ugp" == "u" ]; then
$LFS quota -v -u $local_id $DIR
- log "Files for user ($local_id):"
+ count=$($LFS find --user $local_id $DIR | wc -l)
+ log "Files for user ($local_id), count=$count:"
($LFS find --user $local_id $DIR | head -n 4 |
xargs stat 2>/dev/null)
fi
if [ "$local_ugp" == "a" -o "$local_ugp" == "g" ]; then
$LFS quota -v -g $local_id $DIR
- log "Files for group ($local_id):"
+ count=$($LFS find --group $local_id $DIR | wc -l)
+ log "Files for group ($local_id), count=$count:"
($LFS find --group $local_id $DIR | head -n 4 |
xargs stat 2>/dev/null)
fi
is_project_quota_supported || return 0
if [ "$local_ugp" == "a" -o "$local_ugp" == "p" ]; then
$LFS quota -v -p $TSTPRJID $DIR
- log "Files for project ($TSTPRJID):"
+ count=$($LFS find --projid $TSTPRJID $DIR | wc -l)
+ log "Files for project ($TSTPRJID), count=$count:"
($LFS find --projid $TSTPRJID $DIR | head -n 4 |
xargs stat 2>/dev/null)
fi
# enable quota debug
quota_init() {
do_nodes $(comma_list $(nodes_list)) \
- "$LCTL set_param -n debug=+quota,trace"
+ "$LCTL set_param -n debug=+quota+trace"
}
quota_init
reset_quota_settings
cancel_lru_locks osc
sync; sync_all_data || true
# sync means client wrote all it's cache, but id doesn't
- # garantee that slave got new edquot trough glimpse.
+ # guarantee that slave received new edquot through glimpse.
# so wait a little to be sure slave got it.
sleep 5
$RUNAS $DD of=$testfile count=1 seek=$limit &&
pool_add_targets $qpool 0 $(($OSTCOUNT - 1)) ||
error "pool_add_targets failed"
+ # check qmt_pool_add dmesg error
+ local msg_rgx="QMT0000: can't add to $FSNAME-OST0000.*pool.*$qpool"
+ local dmesg_err
+ dmesg_err=$(do_facet mds1 dmesg | grep "$msg_rgx" | tail -1)
+ [[ -z "$dmesg_err" ]] || error "found qmt_pool_add error: $dmesg_err"
+
$LFS setquota -u $TSTUSR -B ${limit}M --pool $qpool $DIR ||
error "set user quota failed"
}
run_test 1h "Block hard limit test using fallocate"
+test_1i() {
+ local global_limit=200 # 200M
+ local limit1=10 # 10M
+ local TESTDIR="$DIR/$tdir/"
+ local testfile="$TESTDIR/$tfile-0"
+ local testfile1="$TESTDIR/$tfile-1"
+ local testfile2="$TESTDIR/$tfile-2"
+ local qpool1="qpool1"
+
+ mds_supports_qp
+ setup_quota_test || error "setup quota failed with $?"
+ stack_trap cleanup_quota_test EXIT
+
+ # enable ost quota
+ set_ost_qtype $QTYPE || error "enable ost quota failed"
+
+ log "User quota (block hardlimit:$global_limit MB)"
+ $LFS setquota -u $TSTUSR -b 0 -B ${global_limit}M -i 0 -I 0 $DIR ||
+ error "set user quota failed"
+
+ pool_add $qpool1 || error "pool_add failed"
+ pool_add_targets $qpool1 0 0 ||
+ error "pool_add_targets failed"
+
+ $LFS setquota -u $TSTUSR -B ${limit1}M --pool $qpool1 $DIR ||
+ error "set user quota failed"
+
+ # make sure the system is clean
+ local used=$(getquota -u $TSTUSR global curspace)
+ [ $used -ne 0 ] && error "Used space($used) for user $TSTUSR isn't 0."
+
+ $LFS setstripe $TESTDIR -c 1 -i 0 || error "setstripe $TESTDIR failed"
+
+ # hit pool limit
+ test_1_check_write $testfile "user" $limit1
+ $LFS setquota -u $TSTUSR -B 0 --pool $qpool1 $DIR ||
+ error "set user quota failed"
+
+ $LFS quota -uv $TSTUSR --pool $qpool1 $DIR
+ $RUNAS $DD of=$testfile1 count=$((limit1/2)) ||
+ quota_error u $TSTUSR "write failure, but expect success"
+
+ rm -f $testfile
+ rm -f $testfile1
+ wait_delete_completed || error "wait_delete_completed failed"
+ sync_all_data || true
+
+ $LFS setquota -u $TSTUSR -B ${limit1}M --pool $qpool1 $DIR ||
+ error "set user quota failed"
+ test_1_check_write $testfile "user" $limit1
+ local tmp_limit=$(($limit1*2))
+ # increase pool limit
+ $LFS setquota -u $TSTUSR -B ${tmp_limit}M --pool $qpool1 $DIR ||
+ error "set user quota failed"
+ # now write shouldn't fail
+ $RUNAS $DD of=$testfile1 count=$((limit1/3)) ||
+ quota_error u $TSTUSR "write failure, but expect success"
+ # decrease pool limit
+ $LFS setquota -u $TSTUSR -B ${limit1}M --pool $qpool1 $DIR ||
+ error "set user quota failed"
+ $RUNAS $DD of=$testfile2 count=$((limit1/3))
+ # flush cache, ensure noquota flag is set on client
+ cancel_lru_locks osc
+ sync; sync_all_data || true
+ $RUNAS $DD of=$testfile2 seek=$((limit1/3)) count=1 &&
+ quota_error u $TSTUSR "write success, but expect failure"
+ return 0
+}
+run_test 1i "Quota pools: different limit and usage relations"
+
# test inode hardlimit
test_2() {
- local TESTFILE="$DIR/$tdir/$tfile-0"
- local LIMIT=$(do_facet mds1 $LCTL get_param -n \
+ local testfile="$DIR/$tdir/$tfile-0"
+ local least_qunit=$(do_facet mds1 $LCTL get_param -n \
qmt.$FSNAME-QMT0000.md-0x0.info |
- awk '/least qunit/{ print $3 }')
- local L2=$(do_facet mds1 $LCTL get_param -n \
- qmt.$FSNAME-QMT0000.md-0x0.soft_least_qunit)
-
- [ $L2 -le $LIMIT ] || LIMIT=$L2
+ sed -e 's/least qunit/least_qunit/' |
+ awk '/least_qunit/{ print $2 }')
+ local limit
- [ "$SLOW" = "no" ] || LIMIT=$((LIMIT * 1024))
+ [ "$SLOW" = "no" ] && limit=$((least_qunit * 2)) ||
+ limit=$((least_qunit * 1024))
+ echo "least_qunit: '$least_qunit', limit: '$limit'"
- local FREE_INODES=$(mdt_free_inodes 0)
- echo "$FREE_INODES free inodes on master MDT"
- [ $FREE_INODES -lt $LIMIT ] &&
- skip "not enough free inodes $FREE_INODES required $LIMIT"
+ local free_inodes=$(mdt_free_inodes 0)
+ echo "$free_inodes free inodes on master MDT"
+ [ $free_inodes -lt $limit ] &&
+ skip "not enough free inodes $free_inodes required $limit"
setup_quota_test || error "setup quota failed with $?"
set_mdt_qtype $QTYPE || error "enable mdt quota failed"
# test for user
- log "User quota (inode hardlimit:$LIMIT files)"
- $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I $LIMIT $DIR ||
+ log "User quota (inode hardlimit:$limit files)"
+ $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I $limit $DIR ||
error "set user quota failed"
# make sure the system is clean
- local USED=$(getquota -u $TSTUSR global curinodes)
- [ $USED -ne 0 ] && error "Used inodes($USED) for user $TSTUSR isn't 0."
+ local used=$(getquota -u $TSTUSR global curinodes)
+ [ $used -ne 0 ] && error "Used inodes($used) for user $TSTUSR isn't 0."
- log "Create $LIMIT files ..."
- $RUNAS createmany -m ${TESTFILE} $LIMIT ||
+ log "Create $((limit - least_qunit)) files ..."
+ $RUNAS createmany -m ${testfile} $((limit - least_qunit)) ||
quota_error u $TSTUSR "user create failure, but expect success"
+ # it is ok, if it fails on the last qunit
+ $RUNAS createmany -m ${testfile}_yyy $least_qunit || true
log "Create out of file quota ..."
- $RUNAS touch ${TESTFILE}_xxx &&
+ $RUNAS touch ${testfile}_xxx &&
quota_error u $TSTUSR "user create success, but expect EDQUOT"
# cleanup
- unlinkmany ${TESTFILE} $LIMIT || error "unlinkmany $TESTFILE failed"
- rm -f ${TESTFILE}_xxx
+ unlinkmany ${testfile} $((limit - least_qunit)) ||
+ error "unlinkmany $testfile failed"
+ # if 2nd createmany got EDQUOT, not all of nodes would be created
+ unlinkmany ${testfile}_yyy $least_qunit || true
+ rm -f ${testfile}_xxx
wait_delete_completed
- USED=$(getquota -u $TSTUSR global curinodes)
- [ $USED -ne 0 ] && quota_error u $TSTUSR \
+ used=$(getquota -u $TSTUSR global curinodes)
+ [ $used -ne 0 ] && quota_error u $TSTUSR \
"user quota isn't released after deletion"
resetquota -u $TSTUSR
# test for group
log "--------------------------------------"
- log "Group quota (inode hardlimit:$LIMIT files)"
- $LFS setquota -g $TSTUSR -b 0 -B 0 -i 0 -I $LIMIT $DIR ||
+ log "Group quota (inode hardlimit:$limit files)"
+ $LFS setquota -g $TSTUSR -b 0 -B 0 -i 0 -I $limit $DIR ||
error "set group quota failed"
- TESTFILE=$DIR/$tdir/$tfile-1
+ testfile=$DIR/$tdir/$tfile-1
# make sure the system is clean
- USED=$(getquota -g $TSTUSR global curinodes)
- [ $USED -ne 0 ] && error "Used inodes($USED) for group $TSTUSR isn't 0."
+ used=$(getquota -g $TSTUSR global curinodes)
+ [ $used -ne 0 ] && error "Used inodes($used) for group $TSTUSR isn't 0."
- log "Create $LIMIT files ..."
- $RUNAS createmany -m ${TESTFILE} $LIMIT ||
+ log "Create $limit files ..."
+ $RUNAS createmany -m ${testfile} $((limit - least_qunit)) ||
quota_error g $TSTUSR "group create failure, but expect success"
+ $RUNAS createmany -m ${testfile}_yyy $least_qunit ||
log "Create out of file quota ..."
- $RUNAS touch ${TESTFILE}_xxx &&
+ $RUNAS touch ${testfile}_xxx &&
quota_error g $TSTUSR "group create success, but expect EDQUOT"
# cleanup
- unlinkmany ${TESTFILE} $LIMIT || error "unlinkmany $TESTFILE failed"
- rm -f ${TESTFILE}_xxx
+ unlinkmany ${testfile} $((limit - least_qunit)) ||
+ error "unlinkmany $testfile failed"
+ unlinkmany ${testfile}_yyy $least_qunit || true
+ rm -f ${testfile}_xxx
wait_delete_completed
- USED=$(getquota -g $TSTUSR global curinodes)
- [ $USED -ne 0 ] && quota_error g $TSTUSR \
+ used=$(getquota -g $TSTUSR global curinodes)
+ [ $used -ne 0 ] && quota_error g $TSTUSR \
"user quota isn't released after deletion"
resetquota -g $TSTUSR
# test for project
log "--------------------------------------"
- log "Project quota (inode hardlimit:$LIMIT files)"
- $LFS setquota -p $TSTPRJID -b 0 -B 0 -i 0 -I $LIMIT $DIR ||
+ log "Project quota (inode hardlimit:$limit files)"
+ $LFS setquota -p $TSTPRJID -b 0 -B 0 -i 0 -I $limit $DIR ||
error "set project quota failed"
- TESTFILE=$DIR/$tdir/$tfile-1
+ testfile=$DIR/$tdir/$tfile-1
# make sure the system is clean
- USED=$(getquota -p $TSTPRJID global curinodes)
- [ $USED -ne 0 ] &&
- error "Used inodes($USED) for project $TSTPRJID isn't 0"
+ used=$(getquota -p $TSTPRJID global curinodes)
+ [ $used -ne 0 ] &&
+ error "Used inodes($used) for project $TSTPRJID isn't 0"
change_project -sp $TSTPRJID $DIR/$tdir
- log "Create $LIMIT files ..."
- $RUNAS createmany -m ${TESTFILE} $((LIMIT-1)) || quota_error p \
- $TSTPRJID "project create fail, but expect success"
+ log "Create $limit files ..."
+ $RUNAS createmany -m ${testfile} $((limit-least_qunit)) ||
+ quota_error p $TSTPRJID \
+ "project create fail, but expect success"
+ $RUNAS createmany -m ${testfile}_yyy $least_qunit || true
log "Create out of file quota ..."
- $RUNAS touch ${TESTFILE}_xxx && quota_error p $TSTPRJID \
+ $RUNAS touch ${testfile}_xxx && quota_error p $TSTPRJID \
"project create success, but expect EDQUOT"
change_project -C $DIR/$tdir
cleanup_quota_test
- USED=$(getquota -p $TSTPRJID global curinodes)
- [ $USED -eq 0 ] || quota_error p $TSTPRJID \
+ used=$(getquota -p $TSTPRJID global curinodes)
+ [ $used -eq 0 ] || quota_error p $TSTPRJID \
"project quota isn't released after deletion"
}
error "set user quota failed"
$LFS setquota -u $TSTUSR -b ${limit}M -B 0 --pool $qpool $DIR ||
error "set user quota failed"
- # qpool has minimum soft limit, but it's grace is grater than
- # grace period of qpool2. Thus write shouldn't fail when
+ # qpool has minimum soft limit, but its grace is greater than
+ # the grace period of qpool2. Thus write shouldn't fail when
# hit qpool soft limit - only when reaches up qpool2 limit
# after grace2 seconds.
$LFS setquota -u $TSTUSR -b ${limit2}M -B 0 --pool $qpool2 $DIR ||
local TESTFILE=$DIR/$tdir/$tfile-0
local GRACE=12
+ [ "$mds1_FSTYPE" = zfs ] && GRACE=20
set_mdt_qtype $QTYPE || error "enable mdt quota failed"
echo "User quota (soft limit:$LIMIT files grace:$GRACE seconds)"
$LFS setquota -u $TSTUSR -b 0 -B 0 -i $LIMIT -I 0 $DIR ||
error "set user quota failed"
- [ "$mds1_FSTYPE" = zfs ] && GRACE=20
-
test_file_soft $TESTFILE $LIMIT $GRACE "u"
echo "Group quota (soft limit:$LIMIT files grace:$GRACE seconds)"
quota_error a $TSTUSR "dbench failed!"
is_project_quota_supported && change_project -C $DIR/$tdir
+ return 0
}
run_test 8 "Run dbench with quota enabled"
}
run_test 15 "Set over 4T block quota"
+test_16a()
+{
+ (( $CLIENT_VERSION < $(version_code 2.14.55) )) &&
+ skip "Not supported Lustre client before 2.14.55"
+
+ setup_quota_test || error "setup quota failed with $?"
+
+ $LFS setquota -u $TSTUSR -B 500M -I 10K $MOUNT ||
+ error "failed to set quota for user $TSTUSR"
+ $LFS setquota -g $TSTUSR -B 500M -I 10K $MOUNT ||
+ error "failed to set quota for group $TSTUSR"
+
+ $RUNAS $DD of=$DIR/$tdir/$tfile bs=1M count=50 ||
+ quota_error u $TSTUSR "write failure"
+
+ $LFS quota -u $TSTUSR $MOUNT ||
+ quota_error u $TSTUSR "failed to get quota"
+
+ local OSC=$($LCTL dl | grep OST0000-osc-[^M] | awk '{print $4}')
+
+ $LCTL --device %$OSC deactivate
+ stack_trap "$LCTL --device %$OSC activate"
+
+ $LFS quota -v -u $TSTUSR $MOUNT ||
+ quota_error u $TSTUSR "failed to get quota after deactivate OSC"
+ $LFS quota -v -g $TSTUSR $MOUNT ||
+ quota_error g $TSTUSR "failed to get quota after deactivate OSC"
+
+ (( $MDSCOUNT > 1 )) || return 0
+
+ local MDC=$($LCTL dl | grep MDT0001-mdc-[^M] | awk '{print $4}')
+
+ $LCTL --device %$MDC deactivate
+ stack_trap "$LCTL --device %$MDC activate"
+
+ $LFS quota -v -u $TSTUSR $MOUNT ||
+ quota_error u $TSTUSR "failed to get quota after deactivate MDC"
+ $LFS quota -v -g $TSTUSR $MOUNT ||
+ quota_error g $TSTUSR "failed to get quota after deactivate OSC"
+}
+run_test 16a "lfs quota should skip the inactive MDT/OST"
+
+cleanup_16b()
+{
+ stopall
+ formatall
+ setupall
+}
+
+test_16b()
+{
+ (( $CLIENT_VERSION < $(version_code 2.14.55) )) &&
+ skip "Not supported Lustre client before 2.14.55"
+
+ (( $MDSCOUNT >= 3 )) || skip "needs >= 3 MDTs"
+
+ stopall
+ if ! combined_mgs_mds ; then
+ format_mgs
+ start_mgs
+ fi
+
+ add mds1 $(mkfs_opts mds1 $(mdsdevname 1)) --index=0 --reformat \
+ $(mdsdevname 1) $(mdsvdevname 1)
+ add mds2 $(mkfs_opts mds2 $(mdsdevname 2)) --index=1 --reformat \
+ $(mdsdevname 2) $(mdsvdevname 2)
+ add mds3 $(mkfs_opts mds3 $(mdsdevname 3)) --index=100 --reformat \
+ $(mdsdevname 3) $(mdsvdevname 3)
+
+ add ost1 $(mkfs_opts ost1 $(ostdevname 1)) --index=0 --reformat \
+ $(ostdevname 1) $(ostvdevname 1)
+ add ost2 $(mkfs_opts ost2 $(ostdevname 2)) --index=100 --reformat \
+ $(ostdevname 2) $(ostvdevname 2)
+
+ stack_trap cleanup_16b
+
+ start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS || error "MDT1 start failed"
+ start mds2 $(mdsdevname 2) $MDS_MOUNT_OPTS || error "MDT2 start failed"
+ start mds3 $(mdsdevname 3) $MDS_MOUNT_OPTS || error "MDT3 start failed"
+ start ost1 $(ostdevname 1) $OST_MOUNT_OPTS || error "OST1 start failed"
+ start ost2 $(ostdevname 2) $OST_MOUNT_OPTS || error "OST2 start failed"
+
+ mount_client $MOUNT || error "Unable to mount client"
+
+ setup_quota_test || error "setup quota failed with $?"
+ stack_trap cleanup_quota_test EXIT
+
+ $LFS setquota -u $TSTUSR -B 100M -I 10K $MOUNT ||
+ error "failed to set quota for user $TSTUSR"
+ $LFS setquota -g $TSTUSR -B 100M -I 10K $MOUNT ||
+ error "failed to set quota for group $TSTUSR"
+
+ $RUNAS $DD of=$DIR/$tdir/$tfile bs=1M count=10 ||
+ quota_error u $TSTUSR "write failure"
+
+ cnt=$($LFS quota -v -u $TSTUSR $MOUNT | grep -ce "^$FSNAME-[MD|OS]T*")
+ [ $cnt -le 5 ] || quota_error u $TSTUSR "failed to get user quota"
+ cnt=$($LFS quota -v -g $TSTUSR $MOUNT | grep -ce "^$FSNAME-[MD|OS]T*")
+ [ $cnt -le 5 ] || quota_error g $TSTUSR "failed to get group quota"
+}
+run_test 16b "lfs quota should skip the nonexistent MDT/OST"
+
test_17sub() {
local err_code=$1
local BLKS=1 # 1M less than limit
local procf="osd-$mds1_FSTYPE.$FSNAME-MDT0000"
procf=${procf}.quota_slave.acct_user
- local accnt_cnt
+ local acct_cnt
acct_cnt=$(do_facet mds1 $LCTL get_param $procf | grep "id:" | \
awk '{if ($3 < 10000) {print $3}}' | wc -l)
}
run_test 41 "df should return projid-specific values"
+test_delete_qid()
+{
+ local qslv_file=$1
+ local qtype_file=$2
+ local qtype=$3
+ local qid=$4
+ local osd="osd-ldiskfs"
+
+ [ "$ost1_FSTYPE" = zfs ] && osd="osd-zfs"
+
+ rm -f $DIR/$tdir/$tfile
+ $LFS setstripe -i 0 -c 1 $DIR/$tdir/$tfile
+ chmod a+rw $DIR/$tdir/$tfile
+
+ $LFS setquota $qtype $qid -B 300M $MOUNT
+ $RUNAS dd if=/dev/zero of=$DIR/$tdir/$tfile bs=1M count=1 ||
+ error "failed to dd"
+
+ do_facet $SINGLEMDS \
+ "cat /proc/fs/lustre/qmt/$FSNAME-QMT0000/dt-0x0/$qtype_file |
+ grep -E 'id: *$qid'" || error "QMT: no qid $qid is found"
+ echo $osd
+ do_facet ost1 \
+ "cat /proc/fs/lustre/$osd/$FSNAME-OST0000/$qslv_file |
+ grep -E 'id: *$qid'" || error "QSD: no qid $qid is found"
+
+ $LFS setquota $qtype $qid --delete $MOUNT
+ do_facet $SINGLEMDS \
+ "cat /proc/fs/lustre/qmt/$FSNAME-QMT0000/dt-0x0/$qtype_file |
+ grep -E 'id: *$qid'" && error "QMT: qid $qid is not deleted"
+ sleep 5
+ do_facet ost1 \
+ "cat /proc/fs/lustre/$osd/$FSNAME-OST0000/$qslv_file |
+ grep -E 'id: *$qid'" && error "QSD: qid $qid is not deleted"
+
+ $LFS setquota $qtype $qid -B 500M $MOUNT
+ $RUNAS dd if=/dev/zero of=$DIR/$tdir/$tfile bs=1M count=1 ||
+ error "failed to dd"
+ do_facet $SINGLEMDS \
+ "cat /proc/fs/lustre/qmt/$FSNAME-QMT0000/dt-0x0/$qtype_file |
+ grep -E 'id: *$qid'" || error "QMT: qid $pid is not recreated"
+ cat /proc/fs/lustre/$osd/$FSNAME-OST0000/$qslv_file
+ do_facet ost1 \
+ "cat /proc/fs/lustre/$osd/$FSNAME-OST0000/$qslv_file |
+ grep -E 'id: *$qid'" || error "QSD: qid $qid is not recreated"
+}
+
+test_48()
+{
+ setup_quota_test || error "setup quota failed with $?"
+ set_ost_qtype $QTYPE || error "enable ost quota failed"
+ quota_init
+
+ test_delete_qid "quota_slave/limit_user" "glb-usr" "-u" $TSTID
+ test_delete_qid "quota_slave/limit_group" "glb-grp" "-g" $TSTID
+ is_project_quota_supported &&
+ test_delete_qid "quota_slave/limit_project" "glb-prj" "-p" "10000"
+
+ cleanup_quota_test
+}
+run_test 48 "lfs quota --delete should delete quota project ID"
+
test_50() {
! is_project_quota_supported &&
skip "Project quota is not supported"
test_52() {
! is_project_quota_supported &&
skip "Project quota is not supported"
+
+ (( MDS1_VERSION >= $(version_code 2.14.55) )) ||
+ skip "Need MDS version at least 2.14.55"
+
setup_quota_test || error "setup quota failed with $?"
- local dir="$DIR/$tdir/dir"
- mkdir $dir && change_project -sp 1 $dir
- touch $DIR/$tdir/file
- #Try renaming a file into the project. This should fail.
- for num in $(seq 1 2000); do
- mrename $DIR/$tdir/file $dir/file >&/dev/null &&
- error "rename should fail"
- done
- return 0
+ local dir1=$DIR/$tdir/t52_dir1
+ local dir2=$DIR/$tdir/t52_dir2
+
+ mkdir $dir1 || error "failed to mkdir $dir1"
+ mkdir $dir2 || error "failed to mkdir $dir2"
+
+ $LFS project -sp 1000 $dir1 || error "fail to set project on $dir1"
+ $LFS project -sp 1001 $dir2 || error "fail to set project on $dir2"
+
+ $DD if=/dev/zero of=/$dir1/$tfile bs=1M count=100 ||
+ error "failed to create and write $tdir1/$tfile"
+
+ cancel_lru_locks osc
+ sync; sync_all_data || true
+
+ local attrs=($(lsattr -p $dir1/$tfile))
+ (( ${attrs[0]} == 1000 )) ||
+ error "project ID on $dir1/$tfile is not inherited"
+
+ $LFS quota -p 1000 $DIR
+ $LFS quota -p 1001 $DIR
+
+ local prev_used=$(getquota -p 1000 global curspace)
+ local prev_used2=$(getquota -p 1001 global curspace)
+
+ mrename $dir1 $dir2/tdir || log "rename directory return $?"
+
+ local inum_before=$(ls -i $dir1/$tfile | awk '{print $1}')
+ mrename $dir1/$tfile $dir2/$tfile || error "failed to rename file"
+ local inum_after=$(ls -i $dir2/$tfile | awk '{print $1}')
+
+ attrs=($(lsattr -p $dir2/$tfile))
+ (( ${attrs[0]} == 1001 )) ||
+ error "project ID is not updated after rename"
+
+ (( $inum_before == $inum_after )) ||
+ error "inode is changed after rename: $inum_before, $inum_after"
+
+ sync_all_data || true
+
+ $LFS quota -p 1000 $DIR
+ $LFS quota -p 1001 $DIR
+
+ local new_used=$(getquota -p 1000 global curspace)
+ local new_used2=$(getquota -p 1001 global curspace)
+
+ (( $prev_used >= $new_used + 102400 )) ||
+ error "quota is not deducted from old project ID"
+ (( $prev_used2 <= $new_used2 - 102400 )) ||
+ error "quota is not added for the new project ID"
}
-run_test 52 "Rename across different project ID"
+run_test 52 "Rename normal file across project ID"
test_53() {
! is_project_quota_supported &&
test_62() {
! is_project_quota_supported &&
skip "Project quota is not supported"
- [[ "$(chattr -h 2>&1)" =~ "project" ]] ||
+ [[ "$(chattr -h 2>&1)" =~ "project" ||
+ "$(chattr -h 2>&1)" =~ "pRVf" ]] ||
skip "chattr did not support project quota"
setup_quota_test || error "setup quota failed with $?"
local testdir=$DIR/$tdir/
local testdir=$DIR/$tdir/foo
do_facet mds1 $LCTL set_param mdt.*.enable_chprojid_gid=0
- stack_trap "do_facet mds1 $LCTL set_param mdt.*.enable_chprojid_gid=0" \
- EXIT
+ stack_trap "do_facet mds1 $LCTL \
+ set_param mdt.*.enable_chprojid_gid=$old" EXIT
mkdir_on_mdt0 $testdir || error "failed to mkdir"
chown -R $TSTID:$TSTID $testdir
local qtype=$2
local nr
+ wait_update_facet mds1 \
+ "$LCTL get_param -n qmt.$FSNAME-QMT0000.dt-$pool.info \
+ >/dev/null 2>&1 || echo foo" "" ||
+ error "mds1: failed to create quota pool $pool"
+
do_facet mds1 $LCTL get_param -n qmt.$FSNAME-QMT0000.dt-$pool.info |
awk '/usr/ {getline; print $2}'
}
}
run_test 69 "EDQUOT at one of pools shouldn't affect DOM"
-test_70()
+test_70a()
{
local qpool="qpool1"
local limit=20 # MB
rc=$?
[ $rc -eq $err ] || error "quota res $rc != $err"
}
-run_test 70 "check lfs setquota/quota with a pool option"
+run_test 70a "check lfs setquota/quota with a pool option"
+
+test_70b()
+{
+ local glbl_hard=200 # 200M
+ local glbl_soft=100 # 100M
+ local pool_hard=10 # 10M
+ local qpool="qpool1"
+
+ pool_add $qpool || error "pool_add failed"
+ pool_add_targets $qpool 0 1 || error "pool_add_targets failed"
+
+ $LFS setquota -u $TSTUSR -b ${glbl_soft}M -B ${glbl_hard}M $DIR ||
+ error "set user quota failed"
+ $LFS setquota -u $TSTUSR -B ${pool_hard}M --pool $qpool $DIR ||
+ error "set user quota failed"
+
+ local tmp=$(getquota -u $TSTUSR global bhardlimit $qpool)
+ [ $tmp -eq $((pool_hard * 1024)) ] ||
+ error "wrong block hard limit $tmp for $qpool"
+ local tmp=$(getquota -u $TSTUSR global bsoftlimit $qpool)
+ # soft limit hasn't been set and should be zero
+ [ $tmp -eq 0 ] || error "wrong soft block limit $tmp for $qpool"
+}
+run_test 70b "lfs setquota pool works properly"
test_71a()
{
}
run_test 77 "lfs setquota should fail in Lustre mount with 'ro'"
+test_78()
+{
+ (( $OST1_VERSION >= $(version_code 2.14.55) )) ||
+ skip "need OST at least 2.14.55"
+ check_set_fallocate_or_skip
+
+ setup_quota_test || error "setup quota failed with $?"
+
+ # enable ost quota
+ set_ost_qtype $QTYPE || error "enable ost quota failed"
+
+ mkdir -p $DIR/$tdir || error "failed to create $tdir"
+ chown $TSTUSR $DIR/$tdir || error "failed to chown $tdir"
+
+ # setup quota limit
+ $LFS setquota -u $TSTUSR -b25M -B25M $DIR/$tdir ||
+ error "lfs setquota failed"
+
+ # call fallocate
+ runas -u $TSTUSR -g $TSTUSR fallocate -l 204800 $DIR/$tdir/$tfile
+
+ kbytes=$(lfs quota -u $TSTUSR $DIR |
+ awk -v pattern=$DIR 'match($0, pattern) {printf $2}')
+ echo "kbytes returned:$kbytes"
+
+ # For file size of 204800. We should be having roughly 200 kbytes
+ # returned. Anything alarmingly low (50 taken as arbitrary value)
+ # would bail out this TC. Also this also avoids $kbytes of 0
+ # to be used in calculation below.
+ (( $kbytes > 50 )) ||
+ error "fallocate did not use quota. kbytes returned:$kbytes"
+
+ local expect_lo=$(($kbytes * 95 / 100)) # 5% below
+ local expect_hi=$(($kbytes * 105 / 100)) # 5% above
+
+ # Verify kbytes is 200 (204800/1024). With a permited 5% drift
+ (( $kbytes >= $expect_lo && $kbytes <= $expect_hi )) ||
+ error "fallocate did not use quota correctly"
+}
+run_test 78 "Check fallocate increase quota usage"
+
+test_78a()
+{
+ (( $CLIENT_VERSION >= $(version_code 2.15.0) )) ||
+ skip "need client at least 2.15.0"
+ (( $OST1_VERSION >= $(version_code 2.15.0) )) ||
+ skip "need OST at least 2.15.0"
+ check_set_fallocate_or_skip
+
+ setup_quota_test || error "setup quota failed with $?"
+
+ # enable ost quota
+ set_ost_qtype $QTYPE || error "enable ost quota failed"
+
+ mkdir -p $DIR/$tdir || error "failed to create $tdir"
+
+ local projectid=5200 # Random project id to test
+
+ change_project -sp $projectid $DIR/$tdir
+
+ # setup quota limit
+ $LFS setquota -p $projectid -b25M -B25M $DIR/$tdir ||
+ error "lfs setquota project failed"
+
+ # call fallocate
+ fallocate -l 204800 $DIR/$tdir/$tfile
+
+ # Get curspace (kbytes) for $projectid
+ local kbytes=$(getquota -p $projectid global curspace)
+
+ echo "kbytes returned:$kbytes"
+
+ # For file size of 204800. We should be having roughly 200 kbytes
+ # returned. Anything alarmingly low (50 taken as arbitrary value)
+ # would bail out this TC. Also this also avoids $kbytes of 0
+ # to be used in calculation below.
+ (( $kbytes > 50 )) ||
+ error "fallocate did not use projectid. kbytes returned:$kbytes"
+
+ local expect_lo=$(($kbytes * 95 / 100)) # 5% below
+ local expect_hi=$(($kbytes * 105 / 100)) # 5% above
+
+ # Verify kbytes is 200 (204800/1024). With a permited 5% drift
+ (( $kbytes >= $expect_lo && $kbytes <= $expect_hi )) ||
+ error "fallocate did not use quota projectid correctly"
+}
+run_test 78a "Check fallocate increase projectid usage"
+
+test_79()
+{
+ local qpool="qpool1"
+ local cmd="$LCTL get_param -n qmt.$FSNAME-QMT0000.dt-$qpool.info"
+ local stopf=$TMP/$tfile
+
+ do_facet mds1 "touch $stopf"
+ stack_trap "do_facet mds1 'rm -f $stopf'"
+ do_facet mds1 "while [ -e $stopf ]; do $cmd &>/dev/null; done"&
+ local pid=$!
+ pool_add $qpool || error "pool_add failed"
+ do_facet mds1 "rm $stopf"
+ wait $pid
+}
+run_test 79 "access to non-existed dt-pool/info doesn't cause a panic"
+
+test_80()
+{
+ local dir1="$DIR/$tdir/dir1"
+ local dir2="$DIR/$tdir/dir2"
+ local TESTFILE0="$dir1/$tfile-0"
+ local TESTFILE1="$dir1/$tfile-1"
+ local TESTFILE2="$dir1/$tfile-2"
+ local TESTFILE3="$dir2/$tfile-0"
+ local global_limit=100 # 100M
+ local limit=10 # 10M
+ local qpool="qpool1"
+
+ [ "$OSTCOUNT" -lt "2" ] && skip "needs >= 2 OSTs"
+ mds_supports_qp
+ [ "$ost1_FSTYPE" == zfs ] &&
+ skip "ZFS grants some block space together with inode"
+ setup_quota_test || error "setup quota failed with $?"
+ set_ost_qtype $QTYPE || error "enable ost quota failed"
+
+ # make sure the system is clean
+ local used=$(getquota -u $TSTUSR global curspace)
+ [ $used -ne 0 ] && error "Used space($used) for user $TSTUSR is not 0."
+
+ pool_add $qpool || error "pool_add failed"
+ pool_add_targets $qpool 0 1 ||
+ error "pool_add_targets failed"
+
+ $LFS setquota -u $TSTUSR -b 0 -B ${global_limit}M -i 0 -I 0 $DIR ||
+ error "set user quota failed"
+
+ $LFS setquota -u $TSTUSR -B ${global_limit}M --pool $qpool $DIR ||
+ error "set user quota failed"
+ $LFS setquota -u $TSTUSR -B ${limit}M --pool $qpool $DIR ||
+ error "set user quota failed"
+
+ mkdir -p $dir1 || error "failed to mkdir"
+ chown $TSTUSR.$TSTUSR $dir1 || error "chown $dir1 failed"
+ mkdir -p $dir2 || error "failed to mkdir"
+ chown $TSTUSR.$TSTUSR $dir2 || error "chown $dir2 failed"
+
+ $LFS setstripe $dir1 -i 1 -c 1|| error "setstripe $testfile failed"
+ $LFS setstripe $dir2 -i 0 -c 1|| error "setstripe $testfile failed"
+ lfs getstripe $dir1
+ lfs getstripe $dir2
+ sleep 3
+
+ $LFS quota -uv $TSTUSR $DIR
+ #define OBD_FAIL_QUOTA_PREACQ 0xA06
+ do_facet mds1 $LCTL set_param fail_loc=0xa06
+ $RUNAS $DD of=$TESTFILE3 count=3 ||
+ quota_error u $TSTUSR "write failed"
+ $RUNAS $DD of=$TESTFILE2 count=7 ||
+ quota_error u $TSTUSR "write failed"
+ $RUNAS $DD of=$TESTFILE1 count=1 oflag=direct ||
+ quota_error u $TSTUSR "write failed"
+ sync
+ sleep 3
+ $LFS quota -uv --pool $qpool $TSTUSR $DIR
+
+ rm -f $TESTFILE2
+ stop ost2
+ do_facet mds1 $LCTL set_param fail_loc=0
+ start ost2 $(ostdevname 2) $OST_MOUNT_OPTS || error "start ost2 failed"
+ $LFS quota -uv $TSTUSR --pool $qpool $DIR
+ # OST0 needs some time to update quota usage after removing TESTFILE2
+ sleep 4
+ $LFS quota -uv $TSTUSR --pool $qpool $DIR
+ $RUNAS $DD of=$TESTFILE0 count=2 oflag=direct ||
+ quota_error u $TSTUSR "write failure, but expect success"
+}
+run_test 80 "check for EDQUOT after OST failover"
+
+test_81() {
+ local global_limit=20 # 100M
+ local testfile="$DIR/$tdir/$tfile-0"
+ local qpool="qpool1"
+
+ mds_supports_qp
+ setup_quota_test || error "setup quota failed with $?"
+
+ # enable ost quota
+ set_ost_qtype $QTYPE || error "enable ost quota failed"
+
+ # test for user
+ log "User quota (block hardlimit:$global_limit MB)"
+ $LFS setquota -u $TSTUSR -B 1G $DIR || error "set user quota failed"
+
+ pool_add $qpool || error "pool_add failed"
+ #define OBD_FAIL_QUOTA_RECALC 0xA07
+ do_facet mds1 $LCTL set_param fail_loc=0x80000A07 fail_val=30
+ # added OST casues to start pool recalculation
+ pool_add_targets $qpool 0 0 1
+ stop mds1 -f || error "MDS umount failed"
+
+ #start mds1 back to destroy created pool
+ start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS
+ clients_up || true
+}
+run_test 81 "Race qmt_start_pool_recalc with qmt_pool_free"
+
+test_82()
+{
+ (( $MDS1_VERSION >= $(version_code 2.14.55) )) ||
+ skip "need MDS 2.14.55 or later"
+ is_project_quota_supported ||
+ skip "skip project quota unsupported"
+
+ setup_quota_test || error "setup quota failed with $?"
+ stack_trap cleanup_quota_test
+ quota_init
+
+ local parent_dir="$DIR/$tdir.parent"
+ local child_dir="$parent_dir/child"
+
+ mkdir -p $child_dir
+ stack_trap "chown -R 0:0 $parent_dir"
+
+ chown $TSTUSR:$TSTUSR $parent_dir ||
+ error "failed to chown on $parent_dir"
+ chown $TSTUSR2:$TSTUSRS2 $child_dir ||
+ error "failed to chown on $parent_dir"
+
+ $LFS project -p 1000 $parent_dir ||
+ error "failed to set project id on $parent_dir"
+ $LFS project -p 1001 $child_dir ||
+ error "failed to set project id on $child_dir"
+
+ rmdir $child_dir || error "cannot remove child dir, test failed"
+}
+run_test 82 "verify more than 8 qids for single operation"
+
quota_fini()
{
do_nodes $(comma_list $(nodes_list)) \
- "lctl set_param -n debug=-quota,trace"
+ "lctl set_param -n debug=-quota-trace"
if $PQ_CLEANUP; then
disable_project_quota
fi