init_logging
DIRECTIO=${DIRECTIO:-$LUSTRE/tests/directio}
-[ $MDSCOUNT -gt 1 ] && skip "CMD case" && exit 0
-
require_dsh_mds || exit 0
require_dsh_ost || exit 0
# usage: set_mdt_qtype ug|u|g|none
set_mdt_qtype() {
local qtype=$1
- local varsvc=${SINGLEMDS}_svc
+ local varsvc
+ local mdts=$(get_facets MDS)
local cmd
do_facet mgs $LCTL conf_param $FSNAME.quota.mdt=$qtype
- if $(facet_up $SINGLEMDS); then
+ # we have to make sure each MDT received config changes
+ for mdt in ${mdts//,/ }; do
+ varsvc=${mdt}_svc
cmd="$LCTL get_param -n "
- cmd=${cmd}osd-$(facet_fstype $SINGLEMDS).${!varsvc}
+ cmd=${cmd}osd-$(facet_fstype $mdt).${!varsvc}
cmd=${cmd}.quota_slave.enabled
- wait_update_facet $SINGLEMDS "$cmd" "$qtype" || return 1
- fi
+ if $(facet_up $mdt); then
+ wait_update_facet $mdt "$cmd" "$qtype" || return 1
+ fi
+ done
return 0
}
# set ost quota type
-# usage: set_ost_quota_type ug|u|g|none
+# usage: set_ost_qtype ug|u|g|none
set_ost_qtype() {
local qtype=$1
local varsvc
wait_reintegration() {
local ntype=$1
local qtype=$2
+ local max=$3
local result="glb[1],slv[1],reint[0]"
local varsvc
local cmd
+ local tgts
if [ $ntype == "mdt" ]; then
- varsvc=${SINGLEMDS}_svc
+ tgts=$(get_facets MDS)
+ else
+ tgts=$(get_facets OST)
+ fi
+
+ for tgt in ${tgts//,/ }; do
+ varsvc=${tgt}_svc
cmd="$LCTL get_param -n "
- cmd=${cmd}osd-$(facet_fstype $SINGLEMDS).${!varsvc}
+ cmd=${cmd}osd-$(facet_fstype $tgt).${!varsvc}
cmd=${cmd}.quota_slave.info
- if $(facet_up $SINGLEMDS); then
- wait_update_facet $SINGLEMDS "$cmd |
- grep "$qtype" | awk '{ print \\\$3 }'" "$result" ||
- return 1
- fi
- else
- local osts=$(get_facets OST)
- for ost in ${osts//,/ }; do
- varsvc=${ost}_svc
- cmd="$LCTL get_param -n "
- cmd=${cmd}osd-$(facet_fstype $ost).${!varsvc}
- cmd=${cmd}.quota_slave.info
-
- if $(facet_up $ost); then
- wait_update_facet $ost "$cmd |
+ if $(facet_up $tgt); then
+ wait_update_facet $tgt "$cmd |
grep "$qtype" | awk '{ print \\\$3 }'" \
- "$result" || return 1
- fi
- done
- fi
+ "$result" $max || return 1
+ fi
+ done
return 0
}
wait_mdt_reint() {
local qtype=$1
+ local max=${2:-90}
if [ $qtype == "u" ] || [ $qtype == "ug" ]; then
- wait_reintegration "mdt" "user" || return 1
+ wait_reintegration "mdt" "user" $max || return 1
fi
if [ $qtype == "g" ] || [ $qtype == "ug" ]; then
- wait_reintegration "mdt" "group" || return 1
+ wait_reintegration "mdt" "group" $max || return 1
fi
return 0
}
wait_ost_reint() {
local qtype=$1
+ local max=${2:-90}
if [ $qtype == "u" ] || [ $qtype == "ug" ]; then
- wait_reintegration "ost" "user" || return 1
+ wait_reintegration "ost" "user" $max || return 1
fi
if [ $qtype == "g" ] || [ $qtype == "ug" ]; then
- wait_reintegration "ost" "group" || return 1
+ wait_reintegration "ost" "group" $max || return 1
fi
return 0
}
wait_delete_completed
echo "Creating test directory"
mkdir -p $DIR/$tdir
- chmod 077 $DIR/$tdir
+ chmod 0777 $DIR/$tdir
# always clear fail_loc in case of fail_loc isn't cleared
# properly when previous test failed
lustre_fail mds_ost 0
}
quota_init
+resetquota -u $TSTUSR
+resetquota -g $TSTUSR
+resetquota -u $TSTUSR2
+resetquota -g $TSTUSR2
+
test_quota_performance() {
local TESTFILE="$DIR/$tdir/$tfile-0"
local size=$1 # in MB
local MB=100 # 100M
[ "$SLOW" = "no" ] && MB=10
- local free_space=$(lfs df | grep "filesystem summary" | \
- awk '{print $5}')
+ local free_space=$(lfs_df | grep "summary" | awk '{print $4}')
[ $free_space -le $((MB * 1024)) ] &&
skip "not enough space ${free_space} KB, " \
"required $((MB * 1024)) KB" && return
[ "$SLOW" = "no" ] && LIMIT=1024 # 1k inodes
- local FREE_INODES=$(lfs df -i | grep "filesystem summary" | \
- awk '{print $5}')
+ local FREE_INODES=$(lfs_df -i | grep "summary" | awk '{print $4}')
[ $FREE_INODES -lt $LIMIT ] &&
skip "not enough free inodes $FREE_INODES required $LIMIT" &&
return
echo "Start ost1..."
start ost1 $(ostdevname 1) $OST_MOUNT_OPTS
+ quota_init
wait_ost_reint "ug" || error "reintegration failed"
echo "Start ost1..."
start ost1 $(ostdevname 1) $OST_MOUNT_OPTS
+ quota_init
wait_ost_reint "ug" || error "reintegration failed"
echo "Restart ost to trigger reintegration..."
stop ost1
start ost1 $(ostdevname 1) $OST_MOUNT_OPTS
+ quota_init
wait_ost_reint "ug" || error "reintegration failed"
# define OBD_FAIL_QUOTA_DELAY_REINT 0xa03
lustre_fail ost 0xa03
- # enable ost quota to trigger reintegration
+ # enable ost quota
set_ost_qtype "ug" || error "enable ost quota failed"
+ # trigger reintegration
+ local procf="osd-$(facet_fstype ost1).$FSNAME-OST*."
+ procf=${procf}quota_slave.force_reint
+ $LCTL set_param $procf=1 || "force reintegration failed"
echo "Stop mds..."
stop mds1
echo "Start mds..."
start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS
+ quota_init
- wait_ost_reint "ug" || error "reintegration failed"
+ # wait longer than usual to make sure the reintegration
+ # is triggered by quota wb thread.
+ wait_ost_reint "ug" 200 || error "reintegration failed"
# hardlimit should have been fetched by slave during global
# reintegration, write will exceed quota
trap cleanup_quota_test EXIT
set_ost_qtype "none" || error "disable ost quota failed"
- # LU-2284. Enable trace for debug log.
- do_nodes $(comma_list $(nodes_list)) "lctl set_param debug=+trace"
$LFS setquota -u $TSTUSR -B ${limit}M $DIR ||
error "set quota for $TSTUSR failed"
$LFS setquota -u $TSTUSR2 -B ${limit}M $DIR ||
error "set quota for $TSTUSR2 failed"
- do_nodes $(comma_list $(nodes_list)) "lctl set_param debug=-trace"
#define OBD_FAIL_OBD_IDX_READ_BREAK 0x608
lustre_fail mds 0x608 0
}
run_test 7d "Quota reintegration (Transfer index in multiple bulks)"
+# quota reintegration (inode limits)
+test_7e() {
+ [ "$MDSCOUNT" -lt "2" ] && skip "Required more MDTs" && return
+
+ local ilimit=$((1024 * 2)) # 2k inodes
+ local TESTFILE=$DIR/${tdir}-1/$tfile
+
+ setup_quota_test
+ trap cleanup_quota_test EXIT
+
+ # make sure the system is clean
+ local USED=$(getquota -u $TSTUSR global curinodes)
+ [ $USED -ne 0 ] && error "Used inode($USED) for user $TSTUSR isn't 0."
+
+ # make sure no granted quota on mdt1
+ set_mdt_qtype "ug" || error "enable mdt quota failed"
+ resetquota -u $TSTUSR
+ set_mdt_qtype "none" || error "disable mdt quota failed"
+
+ local MDTUUID=$(mdtuuid_from_index $((MDSCOUNT - 1)))
+ USED=$(getquota -u $TSTUSR $MDTUUID ihardlimit)
+ [ $USED -ne 0 ] && error "limit($USED) on $MDTUUID for user" \
+ "$TSTUSR isn't 0."
+
+ echo "Stop mds${MDSCOUNT}..."
+ stop mds${MDSCOUNT}
+
+ echo "Enable quota & set quota limit for $TSTUSR"
+ set_mdt_qtype "ug" || error "enable mdt quota failed"
+ $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I $ilimit $DIR ||
+ error "set quota failed"
+
+ echo "Start mds${MDSCOUNT}..."
+ start mds${MDSCOUNT} $(mdsdevname $MDSCOUNT) $MDS_MOUNT_OPTS
+ quota_init
+
+ wait_mdt_reint "ug" || error "reintegration failed"
+
+ echo "create remote dir"
+ $LFS mkdir -i $((MDSCOUNT - 1)) $DIR/${tdir}-1 ||
+ error "create remote dir failed"
+ chmod 0777 $DIR/${tdir}-1
+
+ # hardlimit should have been fetched by slave during global
+ # reintegration, create will exceed quota
+ $RUNAS createmany -m $TESTFILE $((ilimit + 1)) &&
+ quota_error u $TSTUSR "create succeeded, expect EDQUOT"
+
+ $RUNAS unlinkmany $TESTFILE $ilimit || "unlink files failed"
+ wait_delete_completed
+ sync_all_data || true
+
+ echo "Stop mds${MDSCOUNT}..."
+ stop mds${MDSCOUNT}
+
+ $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I 0 $DIR ||
+ error "clear quota failed"
+
+ echo "Start mds${MDSCOUNT}..."
+ start mds${MDSCOUNT} $(mdsdevname $MDSCOUNT) $MDS_MOUNT_OPTS
+ quota_init
+
+ wait_mdt_reint "ug" || error "reintegration failed"
+
+ # hardlimit should be cleared on slave during reintegration
+ $RUNAS createmany -m $TESTFILE $((ilimit + 1)) ||
+ quota_error -u $TSTUSR "create failed, expect success"
+
+ $RUNAS unlinkmany $TESTFILE $((ilimit + 1)) || "unlink failed"
+ $LFS rmdir $DIR/${tdir}-1 || "unlink remote dir failed"
+
+ cleanup_quota_test
+ resetquota -u $TSTUSR
+}
+run_test 7e "Quota reintegration (inode limits)"
+
# run dbench with quota enabled
test_8() {
local BLK_LIMIT="100g" #100G
# run for fixing bug10707, it needs a big room. test for 64bit
test_9() {
- local filesize=$((1024 * 1024 * 1024 * 9 / 2)) # 4.5G
+ local filesize=$((1024 * 9 / 2)) # 4.5G
check_whether_skip && return 0
}
run_test 11 "Chown/chgrp ignores quota"
-test_12() {
+test_12a() {
[ "$OSTCOUNT" -lt "2" ] && skip "skipping rebalancing test" && return
local blimit=22 # 22M
cleanup_quota_test
resetquota -u $TSTUSR
}
-run_test 12 "Block quota rebalancing"
+run_test 12a "Block quota rebalancing"
+
+test_12b() {
+ [ "$MDSCOUNT" -lt "2" ] && skip "skipping rebalancing test" && return
+
+ local ilimit=$((1024 * 2)) # 2k inodes
+ local TESTFILE0=$DIR/$tdir/$tfile
+ local TESTFILE1=$DIR/${tdir}-1/$tfile
+
+ setup_quota_test
+ trap cleanup_quota_test EXIT
+
+ $LFS mkdir -i 1 $DIR/${tdir}-1 || error "create remote dir failed"
+ chmod 0777 $DIR/${tdir}-1
+
+ set_mdt_qtype "u" || "enable mdt quota failed"
+ quota_show_check f u $TSTUSR
+
+ $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I $ilimit $DIR ||
+ error "set quota failed"
+
+ echo "Create $ilimit files on mdt0..."
+ $RUNAS createmany -m $TESTFILE0 $ilimit ||
+ quota_error u $TSTUSR "create failed, but expect success"
+
+ echo "Create files on mdt1..."
+ $RUNAS createmany -m $TESTFILE1 1 &&
+ quota_error a $TSTUSR "create succeeded, expect EDQUOT"
+
+ echo "Free space from mdt0..."
+ $RUNAS unlinkmany $TESTFILE0 $ilimit || error "unlink mdt0 files failed"
+ wait_delete_completed
+ sync_all_data || true
+
+ echo "Create files on mdt1 after space freed from mdt0..."
+ $RUNAS createmany -m $TESTFILE1 $((ilimit / 2)) ||
+ quota_error a $TSTUSR "rebalancing failed"
+
+ $RUNAS unlinkmany $TESTFILE1 $((ilimit / 2)) ||
+ error "unlink mdt1 files failed"
+ $LFS rmdir $DIR/${tdir}-1 || error "unlink remote dir failed"
+
+ cleanup_quota_test
+ resetquota -u $TSTUSR
+}
+run_test 12b "Inode quota rebalancing"
test_13(){
local TESTFILE=$DIR/$tdir/$tfile
stopall
mount
setupall
+ quota_init
echo "Verify if quota is disabled"
qtype=$(mdt_quota_type)
qtype=$(ost_quota_type)
[ $qtype != "none" ] && error "ost quota setting is lost"
- quota_init
+ return 0
}
run_test 22 "enable/disable quota by 'lctl conf_param'"
git://git.whamcloud.com / fs / lustre-release.git / blobdiff