export PATH=$PWD/$SRCDIR:$SRCDIR:$PWD/$SRCDIR/../utils:$PATH:/sbin
ONLY=${ONLY:-"$*"}
-# enable test_23 after bug 16542 fixed.
+# test_11 has been used to protect a kernel bug(bz10912), now it isn't
+# useful any more. Then add it to ALWAYS_EXCEPT. b=19835
ALWAYS_EXCEPT="10 $SANITY_QUOTA_EXCEPT"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
DIRECTIO=${DIRECTIO:-$LUSTRE/tests/directio}
[ $MDSCOUNT -gt 1 ] && skip "CMD case" && exit 0
+
+unset ENABLE_QUOTA
+
remote_mds_nodsh && skip "remote MDS with nodsh" && exit 0
remote_ost_nodsh && skip "remote OST with nodsh" && exit 0
check_and_setup_lustre
+if [ x"$(som_check)" = x"enabled" ]; then
+ echo "Som is enabled, Quota is temporary conflicts with it"
+ check_and_cleanup_lustre
+ exit 0
+fi
+
LOVNAME=`lctl get_param -n llite.*.lov.common_name | tail -n 1`
OSTCOUNT=`lctl get_param -n lov.$LOVNAME.numobd`
SHOW_QUOTA_USER="$LFS quota -v -u $TSTUSR $DIR"
+SHOW_QUOTA_USERID="$LFS quota -v -u $TSTID $DIR"
SHOW_QUOTA_USER2="$LFS quota -v -u $TSTUSR2 $DIR"
SHOW_QUOTA_GROUP="$LFS quota -v -g $TSTUSR $DIR"
+SHOW_QUOTA_GROUPID="$LFS quota -v -g $TSTID $DIR"
SHOW_QUOTA_GROUP2="$LFS quota -v -g $TSTUSR2 $DIR"
-SHOW_QUOTA_INFO="$LFS quota -t $DIR"
+SHOW_QUOTA_INFO_USER="$LFS quota -t -u $DIR"
+SHOW_QUOTA_INFO_GROUP="$LFS quota -t -g $DIR"
# control the time of tests
cycle=30
build_test_filter
-eval ONLY_0=true
-eval ONLY_99=true
-
# set_blk_tunables(btune_sz)
set_blk_tunesz() {
local btune=$(($1 * BLK_SZ))
}
lustre_fail() {
- local fail_node=$1
+ local fail_node=$1
local fail_loc=$2
local fail_val=${3:-0}
- if [ $fail_node == "mds" ] || [ $fail_node == "mds_ost" ]; then
- if [ $((fail_loc & 0x10000000)) -ne 0 -a $fail_val -gt 0 ] || \
- [ $((fail_loc)) -eq 0 ]; then
- do_facet $SINGLEMDS "lctl set_param fail_val=$fail_val"
- fi
- do_facet $SINGLEMDS "lctl set_param fail_loc=$fail_loc"
- fi
- if [ $fail_node == "ost" ] || [ $fail_node == "mds_ost" ]; then
- for num in `seq $OSTCOUNT`; do
- if [ $((fail_loc & 0x10000000)) -ne 0 -a $fail_val -gt 0 ] || \
- [ $((fail_loc)) -eq 0 ]; then
- do_facet ost$num "lctl set_param fail_val=$fail_val"
- fi
- do_facet ost$num "lctl set_param fail_loc=$fail_loc"
- done
- fi
+ if [ $fail_node == "mds" ] || [ $fail_node == "mds_ost" ]; then
+ if [ $((fail_loc & 0x10000000)) -ne 0 -a $fail_val -gt 0 ] || \
+ [ $((fail_loc)) -eq 0 ]; then
+ do_facet $SINGLEMDS "lctl set_param fail_val=$fail_val"
+ fi
+ do_facet $SINGLEMDS "lctl set_param fail_loc=$fail_loc"
+ fi
+ if [ $fail_node == "ost" ] || [ $fail_node == "mds_ost" ]; then
+ for num in `seq $OSTCOUNT`; do
+ if [ $((fail_loc & 0x10000000)) -ne 0 -a $fail_val -gt 0 ] || \
+ [ $((fail_loc)) -eq 0 ]; then
+ do_facet ost$num "lctl set_param fail_val=$fail_val"
+ fi
+ do_facet ost$num "lctl set_param fail_loc=$fail_loc"
+ done
+ fi
}
RUNAS="runas -u $TSTID -g $TSTID"
# resetquota -g groupname
resetquota() {
- [ "$#" != 2 ] && error "resetquota: wrong number of arguments: $#"
- [ "$1" != "-u" -a "$1" != "-g" ] && error "resetquota: wrong specifier $1 passed"
- $LFS setquota "$1" "$2" -b 0 -B 0 -i 0 -I 0 $MOUNT || error "resetquota failed"
+ [ "$#" != 2 ] && error "resetquota: wrong number of arguments: $#"
+ [ "$1" != "-u" -a "$1" != "-g" ] && error "resetquota: wrong specifier $1 passed"
+
+ count=0
+ if at_is_enabled; then
+ timeout=$(at_max_get mds)
+ else
+ timeout=$(lctl get_param -n timeout)
+ fi
+
+ while [ $((count++)) -lt $timeout ]; do
+ $LFS setquota "$1" "$2" -b 0 -B 0 -i 0 -I 0 $MOUNT
+ RC=$?
+ if [ $RC -ne 0 ]; then
+ if [ $RC -eq 240 ]; then # 240 means -EBUSY
+ log "resetquota is blocked for quota master recovery, retry after 1 sec"
+ sleep 1
+ continue
+ else
+ error "resetquota failed: $RC"
+ fi
+ fi
+ break
+ done
+
+ [ $count -lt $timeout ] || error "resetquota timeout: $timeout"
+}
+
+quota_scan() {
+ LOCAL_UG=$1
+ LOCAL_ID=$2
+
+ if [ "$LOCAL_UG" == "a" -o "$LOCAL_UG" == "u" ]; then
+ log "Files for user ($LOCAL_ID):"
+ ($LFS find -user $LOCAL_ID $DIR | xargs stat 2>/dev/null)
+ fi
+
+ if [ "$LOCAL_UG" == "a" -o "$LOCAL_UG" == "g" ]; then
+ log "Files for group ($LOCAL_ID):"
+ ($LFS find -group $LOCAL_ID $DIR | xargs stat 2>/dev/null)
+ fi
+}
+
+quota_error() {
+ quota_scan $1 $2
+ shift 2
+ error "$*"
+}
+
+quota_log() {
+ quota_scan $1 $2
+ shift 2
+ log "$*"
+}
+
+quota_show_check() {
+ LOCAL_BF=$1
+ LOCAL_UG=$2
+ LOCAL_ID=$3
+ PATTERN="`echo $DIR | sed 's/\//\\\\\//g'`"
+
+ $LFS quota -v -$LOCAL_UG $LOCAL_ID $DIR
+
+ if [ "$LOCAL_BF" == "a" -o "$LOCAL_BF" == "b" ]; then
+ USAGE="`$LFS quota -$LOCAL_UG $LOCAL_ID $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $2 }'`"
+ if [ -z $USAGE ]; then
+ quota_error $LOCAL_UG $LOCAL_ID "System is error when query quota for block ($LOCAL_UG:$LOCAL_ID)."
+ else
+ [ $USAGE -ne 0 ] && quota_log $LOCAL_UG $LOCAL_ID "System is not clean for block ($LOCAL_UG:$LOCAL_ID:$USAGE)."
+ fi
+ fi
+
+ if [ "$LOCAL_BF" == "a" -o "$LOCAL_BF" == "f" ]; then
+ USAGE="`$LFS quota -$LOCAL_UG $LOCAL_ID $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $5 }'`"
+ if [ -z $USAGE ]; then
+ quota_error $LOCAL_UG $LOCAL_ID "System is error when query quota for file ($LOCAL_UG:$LOCAL_ID)."
+ else
+ [ $USAGE -ne 0 ] && quota_log $LOCAL_UG $LOCAL_ID "System is not clean for file ($LOCAL_UG:$LOCAL_ID:$USAGE)."
+ fi
+ fi
}
# set quota
-test_0() {
- $LFS quotaoff -ug $DIR
+quota_init() {
$LFS quotacheck -ug $DIR
resetquota -u $TSTUSR
resetquota -g $TSTUSR
- lctl set_param debug="+quota"
- do_facet $SINGLEMDS "lctl set_param debug=+quota"
- for num in `seq $OSTCOUNT`; do
- do_facet ost$num "lctl set_param debug=+quota"
- done
+ do_nodes $(comma_list $(nodes_list)) "lctl set_param debug=+quota"
}
-run_test_with_stat 0 "Set quota ============================="
+quota_init
# test for specific quota limitation, qunit, qtune $1=block_quota_limit
test_1_sub() {
- LIMIT=$1
+ LIMIT=$1
mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
- TESTFILE="$DIR/$tdir/$tfile-0"
+ TESTFILE="$DIR/$tdir/$tfile-0"
wait_delete_completed
- # test for user
- log " User quota (limit: $LIMIT kbytes)"
- $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ # test for user
+ log " User quota (limit: $LIMIT kbytes)"
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
sleep 3
- $SHOW_QUOTA_USER
-
- $LFS setstripe $TESTFILE -c 1
- chown $TSTUSR.$TSTUSR $TESTFILE
-
- log " Write ..."
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) || error "(usr) write failure, but expect success"
- log " Done"
- log " Write out of block quota ..."
+ quota_show_check b u $TSTUSR
+
+ $LFS setstripe $TESTFILE -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
+ log " Write ..."
+ stime=`date +%s`
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) || quota_error u $TSTUSR "(usr) write failure, but expect success"
+ etime=`date +%s`
+ delta=$((etime - stime))
+ if [ $delta -gt 0 ]; then
+ rate=$((BLK_SZ * LIMIT / 2 / delta / 1024))
+ [ $rate -gt 1024 ] || error "SLOW IO for $TSTUSR (user): $rate KB/sec"
+ fi
+ log " Done"
+ log " Write out of block quota ..."
# this time maybe cache write, ignore it's failure
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) seek=$(($LIMIT/2)) || true
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) seek=$(($LIMIT/2)) || true
# flush cache, ensure noquota flag is setted on client
- cancel_lru_locks osc
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$LIMIT && error "(usr) write success, but expect EDQUOT"
+ cancel_lru_locks osc
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$LIMIT && quota_error u $TSTUSR "(usr) write success, but expect EDQUOT"
- rm -f $TESTFILE
+ rm -f $TESTFILE
sync; sleep 1; sync;
OST0_UUID=`do_facet ost1 $LCTL dl | grep -m1 obdfilter | awk '{print $((NF-1))}'`
OST0_QUOTA_USED=`$LFS quota -o $OST0_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
echo $OST0_QUOTA_USED
[ $OST0_QUOTA_USED -ne 0 ] && \
- ($SHOW_QUOTA_USER; error "quota deleted isn't released")
+ ($SHOW_QUOTA_USER; quota_error u $TSTUSR "(usr) quota deleted isn't released")
$SHOW_QUOTA_USER
resetquota -u $TSTUSR
- # test for group
+ # test for group
log "--------------------------------------"
- log " Group quota (limit: $LIMIT kbytes)"
- $LFS setquota -g $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ log " Group quota (limit: $LIMIT kbytes)"
+ $LFS setquota -g $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
sleep 3
- $SHOW_QUOTA_GROUP
- TESTFILE="$DIR/$tdir/$tfile-1"
-
- $LFS setstripe $TESTFILE -c 1
- chown $TSTUSR.$TSTUSR $TESTFILE
-
- log " Write ..."
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) || error "(grp) write failure, but expect success"
- log " Done"
- log " Write out of block quota ..."
+ quota_show_check b g $TSTUSR
+ TESTFILE="$DIR/$tdir/$tfile-1"
+
+ $LFS setstripe $TESTFILE -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
+ log " Write ..."
+ stime=`date +%s`
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) || quota_error g $TSTUSR "(grp) write failure, but expect success"
+ etime=`date +%s`
+ delta=$((etime - stime))
+ rate=$((BLK_SZ * LIMIT / 2 / delta / 1024))
+ [ $rate -gt 1024 ] || error "SLOW IO for $TSTUSR (group): $rate KB/sec"
+ log " Done"
+ log " Write out of block quota ..."
# this time maybe cache write, ignore it's failure
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) seek=$(($LIMIT/2)) || true
- cancel_lru_locks osc
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$LIMIT && error "(grp) write success, but expect EDQUOT"
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) seek=$(($LIMIT/2)) || true
+ cancel_lru_locks osc
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$LIMIT && quota_error g $TSTUSR "(grp) write success, but expect EDQUOT"
# cleanup
- rm -f $TESTFILE
+ rm -f $TESTFILE
sync; sleep 1; sync;
OST0_UUID=`do_facet ost1 $LCTL dl | grep -m1 obdfilter | awk '{print $((NF-1))}'`
OST0_QUOTA_USED=`$LFS quota -o $OST0_UUID -g $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
echo $OST0_QUOTA_USED
[ $OST0_QUOTA_USED -ne 0 ] && \
- ($SHOW_QUOTA_USER; error "quota deleted isn't released")
+ ($SHOW_QUOTA_GROUP; quota_error g $TSTUSR "(grp) quota deleted isn't released")
$SHOW_QUOTA_GROUP
resetquota -g $TSTUSR
}
blk_qunit=$(( $RANDOM % 3072 + 1024 ))
blk_qtune=$(( $RANDOM % $blk_qunit ))
# other osts and mds will occupy at 1M blk quota
- b_limit=$(( ($RANDOM - 16384) / 8 + $OSTCOUNT * $blk_qunit * 4 ))
+ b_limit=$(( ($RANDOM - 16384) / 8 + ($OSTCOUNT + 1) * $blk_qunit * 4 ))
set_blk_tunesz $blk_qtune
set_blk_unitsz $blk_qunit
echo "cycle: $i(total $cycle) bunit:$blk_qunit, btune:$blk_qtune, blimit:$b_limit"
echo "=================================================="
set_blk_unitsz $((128 * 1024))
set_blk_tunesz $((128 * 1024 / 2))
- done
+ done
}
run_test_with_stat 1 "Block hard limit (normal use and out of quota) ==="
# test for specific quota limitation, qunit, qtune $1=block_quota_limit
test_2_sub() {
- LIMIT=$1
+ LIMIT=$1
mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
- TESTFILE="$DIR/$tdir/$tfile-0"
+ TESTFILE="$DIR/$tdir/$tfile-0"
wait_delete_completed
- # test for user
- log " User quota (limit: $LIMIT files)"
- $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I $LIMIT $DIR
+ # test for user
+ log " User quota (limit: $LIMIT files)"
+ $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I $LIMIT $DIR
sleep 3
- $SHOW_QUOTA_USER
+ quota_show_check f u $TSTUSR
log " Create $LIMIT files ..."
$RUNAS createmany -m ${TESTFILE} $LIMIT || \
- error "(usr) create failure, but expect success"
+ quota_error u $TSTUSR "(usr) create failure, but expect success"
log " Done"
log " Create out of file quota ..."
$RUNAS touch ${TESTFILE}_xxx && \
- error "(usr) touch success, but expect EDQUOT"
+ quota_error u $TSTUSR "(usr) touch success, but expect EDQUOT"
unlinkmany ${TESTFILE} $LIMIT
rm -f ${TESTFILE}_xxx
MDS_QUOTA_USED=`$LFS quota -o $MDS_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
echo $MDS_QUOTA_USED
[ $MDS_QUOTA_USED -ne 0 ] && \
- ($SHOW_QUOTA_USER; error "quota deleted isn't released")
+ ($SHOW_QUOTA_USER; quota_error u $TSTUSR "(usr) quota deleted isn't released")
$SHOW_QUOTA_USER
resetquota -u $TSTUSR
- # test for group
+ # test for group
log "--------------------------------------"
- log " Group quota (limit: $LIMIT FILE)"
- $LFS setquota -g $TSTUSR -b 0 -B 0 -i 0 -I $LIMIT $DIR
+ log " Group quota (limit: $LIMIT FILE)"
+ $LFS setquota -g $TSTUSR -b 0 -B 0 -i 0 -I $LIMIT $DIR
sleep 3
- $SHOW_QUOTA_GROUP
- TESTFILE=$DIR/$tdir/$tfile-1
+ quota_show_check f g $TSTUSR
+ TESTFILE=$DIR/$tdir/$tfile-1
log " Create $LIMIT files ..."
$RUNAS createmany -m ${TESTFILE} $LIMIT || \
- error "(usr) create failure, but expect success"
+ quota_error g $TSTUSR "(grp) create failure, but expect success"
log " Done"
log " Create out of file quota ..."
$RUNAS touch ${TESTFILE}_xxx && \
- error "(usr) touch success, but expect EDQUOT"
+ quota_error g $TSTUSR "(grp) touch success, but expect EDQUOT"
unlinkmany ${TESTFILE} $LIMIT
rm -f ${TESTFILE}_xxx
MDS_QUOTA_USED=`$LFS quota -o $MDS_UUID -g $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
echo $MDS_QUOTA_USED
[ $MDS_QUOTA_USED -ne 0 ] && \
- ($SHOW_QUOTA_USER; error "quota deleted isn't released")
+ ($SHOW_QUOTA_GROUP; quota_error g $TSTUSR "(grp) quota deleted isn't released")
$SHOW_QUOTA_GROUP
resetquota -g $TSTUSR
}
# define ino_qunit is between 10 and 100
ino_qunit=$(( $RANDOM % 90 + 10 ))
ino_qtune=$(( $RANDOM % $ino_qunit ))
- # RANDOM's maxium is 32767
+ # RANDOM's maxium is 32767
i_limit=$(( $RANDOM % 990 + 10 ))
fi
- set_file_tunesz $ino_qtune
+ set_file_tunesz $ino_qtune
set_file_unitsz $ino_qunit
echo "cycle: $i(total $cycle) iunit:$ino_qunit, itune:$ino_qtune, ilimit:$i_limit"
test_2_sub $i_limit
echo "=================================================="
set_file_unitsz 5120
set_file_tunesz 2560
- done
+ done
}
run_test_with_stat 2 "File hard limit (normal use and out of quota) ==="
echo " Write to exceed soft limit"
RUNDD="$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ"
$RUNDD count=$((BUNIT_SZ+1)) || \
- error "write failure, but expect success"
+ quota_error a $TSTUSR "write failure, but expect success"
OFFSET=$((OFFSET + BUNIT_SZ + 1))
- cancel_lru_locks osc
+ cancel_lru_locks osc
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
- $SHOW_QUOTA_INFO
+ $SHOW_QUOTA_INFO_USER
+ $SHOW_QUOTA_INFO_GROUP
echo " Write before timer goes off"
$RUNDD count=$BUNIT_SZ seek=$OFFSET || \
- error "write failure, but expect success"
+ quota_error a $TSTUSR "write failure, but expect success"
OFFSET=$((OFFSET + BUNIT_SZ))
- cancel_lru_locks osc
+ cancel_lru_locks osc
echo " Done"
- echo " Sleep $TIMER seconds ..."
- sleep $TIMER
+ echo " Sleep $TIMER seconds ..."
+ sleep $TIMER
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
- $SHOW_QUOTA_INFO
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
+ $SHOW_QUOTA_INFO_USER
+ $SHOW_QUOTA_INFO_GROUP
echo " Write after timer goes off"
# maybe cache write, ignore.
$RUNDD count=$BUNIT_SZ seek=$OFFSET || true
OFFSET=$((OFFSET + BUNIT_SZ))
- cancel_lru_locks osc
+ cancel_lru_locks osc
$RUNDD count=$BUNIT_SZ seek=$OFFSET && \
- error "write success, but expect EDQUOT"
+ quota_error a $TSTUSR "write success, but expect EDQUOT"
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
- $SHOW_QUOTA_INFO
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
+ $SHOW_QUOTA_INFO_USER
+ $SHOW_QUOTA_INFO_GROUP
echo " Unlink file to stop timer"
rm -f $TESTFILE
sync; sleep 1; sync
echo " Done"
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
- $SHOW_QUOTA_INFO
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
+ $SHOW_QUOTA_INFO_USER
+ $SHOW_QUOTA_INFO_GROUP
echo " Write ..."
- $RUNDD count=$BUNIT_SZ || error "write failure, but expect success"
+ $RUNDD count=$BUNIT_SZ || quota_error a $TSTUSR "write failure, but expect success"
echo " Done"
# cleanup
mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
- # 1 bunit on mds and 1 bunit on every ost
+ # 1 bunit on mds and 1 bunit on every ost
LIMIT=$(( $BUNIT_SZ * ($OSTCOUNT + 1) ))
GRACE=10
echo " Create files to exceed soft limit"
$RUNAS createmany -m ${TESTFILE}_ $((LIMIT + 1)) || \
- error "create failure, but expect success"
+ quota_error a $TSTUSR "create failure, but expect success"
sync; sleep 1; sync
echo " Done"
echo " Create file before timer goes off"
$RUNAS touch ${TESTFILE}_before || \
- error "failed create before timer expired, but expect success"
+ quota_error a $TSTUSR "failed create before timer expired, but expect success"
sync; sleep 1; sync
echo " Done"
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
- $SHOW_QUOTA_INFO
+ $SHOW_QUOTA_INFO_USER
+ $SHOW_QUOTA_INFO_GROUP
echo " Create file after timer goes off"
# the least of inode qunit is 2, so there are at most 3(qunit:2+qtune:1)
- # inode quota left here
+ # inode quota left here
$RUNAS touch ${TESTFILE}_after ${TESTFILE}_after1 ${TESTFILE}_after2 || true
sync; sleep 1; sync
$RUNAS touch ${TESTFILE}_after3 && \
- error "create after timer expired, but expect EDQUOT"
+ quota_error a $TSTUSR "create after timer expired, but expect EDQUOT"
sync; sleep 1; sync
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
- $SHOW_QUOTA_INFO
+ $SHOW_QUOTA_INFO_USER
+ $SHOW_QUOTA_INFO_GROUP
echo " Unlink files to stop timer"
find `dirname $TESTFILE` -name "`basename ${TESTFILE}`*" | xargs rm -f
echo " Create file"
$RUNAS touch ${TESTFILE}_xxx || \
- error "touch after timer stop failure, but expect success"
+ quota_error a $TSTUSR "touch after timer stop failure, but expect success"
sync; sleep 1; sync
echo " Done"
echo " User quota (soft limit: $LIMIT files grace: $GRACE seconds)"
$LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace $GRACE $DIR
$LFS setquota -u $TSTUSR -b 0 -B 0 -i $LIMIT -I 0 $DIR
- $SHOW_QUOTA_USER
+ quota_show_check f u $TSTUSR
test_file_soft $TESTFILE $LIMIT $GRACE
resetquota -u $TSTUSR
echo " Group quota (soft limit: $LIMIT files grace: $GRACE seconds)"
$LFS setquota -t -g --block-grace $MAX_DQ_TIME --inode-grace $GRACE $DIR
$LFS setquota -g $TSTUSR -b 0 -B 0 -i $LIMIT -I 0 $DIR
- $SHOW_QUOTA_GROUP
+ quota_show_check f g $TSTUSR
TESTFILE=$DIR/$tdir/$tfile-1
test_file_soft $TESTFILE $LIMIT $GRACE
run_test_with_stat 4a "File soft limit (start timer, timer goes off, stop timer) ==="
test_4b() { # was test_4a
- GR_STR1="1w3d"
- GR_STR2="1000s"
- GR_STR3="5s"
- GR_STR4="1w2d3h4m5s"
- GR_STR5="5c"
- GR_STR6="1111111111111111"
+ GR_STR1="1w3d"
+ GR_STR2="1000s"
+ GR_STR3="5s"
+ GR_STR4="1w2d3h4m5s"
+ GR_STR5="5c"
+ GR_STR6="1111111111111111"
wait_delete_completed
- # test of valid grace strings handling
- echo " Valid grace strings test"
- $LFS setquota -t -u --block-grace $GR_STR1 --inode-grace $GR_STR2 $DIR
- $LFS quota -u -t $DIR | grep "Block grace time: $GR_STR1"
- $LFS setquota -t -g --block-grace $GR_STR3 --inode-grace $GR_STR4 $DIR
- $LFS quota -g -t $DIR | grep "Inode grace time: $GR_STR4"
-
- # test of invalid grace strings handling
- echo " Invalid grace strings test"
- ! $LFS setquota -t -u --block-grace $GR_STR4 --inode-grace $GR_STR5 $DIR
- ! $LFS setquota -t -g --block-grace $GR_STR4 --inode-grace $GR_STR6 $DIR
-
- # cleanup
- $LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace $MAX_IQ_TIME $DIR
- $LFS setquota -t -g --block-grace $MAX_DQ_TIME --inode-grace $MAX_IQ_TIME $DIR
+ # test of valid grace strings handling
+ echo " Valid grace strings test"
+ $LFS setquota -t -u --block-grace $GR_STR1 --inode-grace $GR_STR2 $DIR
+ $LFS quota -u -t $DIR | grep "Block grace time: $GR_STR1"
+ $LFS setquota -t -g --block-grace $GR_STR3 --inode-grace $GR_STR4 $DIR
+ $LFS quota -g -t $DIR | grep "Inode grace time: $GR_STR4"
+
+ # test of invalid grace strings handling
+ echo " Invalid grace strings test"
+ ! $LFS setquota -t -u --block-grace $GR_STR4 --inode-grace $GR_STR5 $DIR
+ ! $LFS setquota -t -g --block-grace $GR_STR4 --inode-grace $GR_STR6 $DIR
+
+ # cleanup
+ $LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace $MAX_IQ_TIME $DIR
+ $LFS setquota -t -g --block-grace $MAX_DQ_TIME --inode-grace $MAX_IQ_TIME $DIR
}
run_test_with_stat 4b "Grace time strings handling ==="
echo " Set quota limit (0 $BLIMIT 0 $ILIMIT) for $TSTUSR.$TSTUSR"
$LFS setquota -u $TSTUSR -b 0 -B $BLIMIT -i 0 -I $ILIMIT $DIR
$LFS setquota -g $TSTUSR -b 0 -B $BLIMIT -i 0 -I $ILIMIT $DIR
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
+ quota_show_check a u $TSTUSR
+ quota_show_check a g $TSTUSR
echo " Create more than $ILIMIT files and more than $BLIMIT kbytes ..."
createmany -m $DIR/$tdir/$tfile-0_ $((ILIMIT + 1)) || \
echo " Chown files to $TSTUSR.$TSTUSR ..."
for i in `seq 0 $ILIMIT`; do
chown $TSTUSR.$TSTUSR $DIR/$tdir/$tfile-0_$i || \
- error "chown failure, but expect success"
+ quota_error a $TSTUSR "chown failure, but expect success"
done
# cleanup
# block quota acquire & release
test_6() {
if [ $OSTCOUNT -lt 2 ]; then
- skip "$OSTCOUNT < 2, too few osts"
+ skip_env "$OSTCOUNT < 2, too few osts"
return 0;
fi
echo " Set block limit $LIMIT kbytes to $TSTUSR.$TSTUSR"
$LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
$LFS setquota -g $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
+ quota_show_check b u $TSTUSR
+ quota_show_check b g $TSTUSR
echo " Create filea on OST0 and fileb on OST1"
$LFS setstripe $FILEA -i 0 -c 1
chown $TSTUSR.$TSTUSR $FILEB
echo " Exceed quota limit ..."
- RUNDD="$RUNAS dd if=/dev/zero of=$FILEB bs=$BLK_SZ"
- $RUNDD count=$((LIMIT - BUNIT_SZ * OSTCOUNT)) || \
- error "write fileb failure, but expect success"
-
- cancel_lru_locks osc
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
- $RUNDD seek=$LIMIT count=$((BUNIT_SZ * OSTCOUNT)) && \
- error "write fileb success, but expect EDQUOT"
- cancel_lru_locks osc
- echo " Write to OST0 return EDQUOT"
+ RUNDD="$RUNAS dd if=/dev/zero of=$FILEA bs=$BLK_SZ"
+ $RUNDD count=$((LIMIT - BUNIT_SZ * OSTCOUNT)) || \
+ quota_error a $TSTUSR "write filea failure, but expect success"
+
+ cancel_lru_locks osc
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
+ $RUNDD seek=$LIMIT count=$((BUNIT_SZ * OSTCOUNT)) && \
+ quota_error a $TSTUSR "write filea success, but expect EDQUOT"
+ cancel_lru_locks osc
+ echo " Write to OST1 return EDQUOT"
# this write maybe cache write, ignore it's failure
- RUNDD="$RUNAS dd if=/dev/zero of=$FILEA bs=$BLK_SZ"
- $RUNDD count=$(($BUNIT_SZ * 2)) || true
- cancel_lru_locks osc
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
- $RUNDD count=$((BUNIT_SZ * 2)) seek=$((BUNIT_SZ *2)) && \
- error "write filea success, but expect EDQUOT"
+ RUNDD="$RUNAS dd if=/dev/zero of=$FILEB bs=$BLK_SZ"
+ $RUNDD count=$(($BUNIT_SZ * 2)) || true
+ cancel_lru_locks osc
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
+ $RUNDD count=$((BUNIT_SZ * 2)) seek=$((BUNIT_SZ *2)) && \
+ quota_error a $TSTUSR "write fileb success, but expect EDQUOT"
+
+ echo " Remove filea to let OST0 release quota"
+ rm -f $FILEA
- echo " Remove fileb to let OST1 release quota"
- rm -f $FILEB
- sync; sleep 10; sync; # need to allow journal commit for small fs
+ if at_is_enabled; then
+ timeout=$(at_max_get mds)
+ else
+ timeout=$(lctl get_param -n timeout)
+ fi
+ count=$((timeout / 5))
+ OST0_UUID=`do_facet ost1 $LCTL dl | grep -m1 obdfilter | awk '{print $((NF-1))}'`
+
+ while [ $((count--)) -gt 0 ]; do
+ sync && sleep 5
+
+ OST0_QUOTA_HOLD=`$LFS quota -o $OST0_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $3 }'`
+ if [ -z $OST0_QUOTA_HOLD ]; then
+ error "System is error when query quota for block (U:$TSTUSR)."
+ else
+ [ $OST0_QUOTA_HOLD -gt $BUNIT_SZ ] && continue
+ fi
+
+ break
+ done
- echo " Write to OST0"
+ [ ! $count -gt 0 ] && error "Release quota for block timeout (U:$TSTUSR)."
+ $SHOW_QUOTA_USER
+
+ while [ $((count--)) -gt 0 ]; do
+ sync && sleep 5
+
+ OST0_QUOTA_HOLD=`$LFS quota -o $OST0_UUID -g $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $3 }'`
+ if [ -z $OST0_QUOTA_HOLD ]; then
+ error "System is error when query quota for block (G:$TSTUSR)."
+ else
+ [ $OST0_QUOTA_HOLD -gt $BUNIT_SZ ] && continue
+ fi
+
+ break
+ done
+
+ [ ! $count -gt 0 ] && error "Release quota for block timeout (G:$TSTUSR)."
+ $SHOW_QUOTA_GROUP
+
+ echo " Write to OST1"
$RUNDD count=$((LIMIT - BUNIT_SZ * OSTCOUNT)) || \
- error "write filea failure, expect success"
+ quota_error a $TSTUSR "write fileb failure, expect success"
echo " Done"
# cleanup
- rm -f $FILEA
+ rm -f $FILEB
sync; sleep 3; sync;
resetquota -u $TSTUSR
echo " Write to OST0..."
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ || \
- error "write failure, but expect success"
+ quota_error u $TSTUSR "write failure, but expect success"
- #define OBD_FAIL_OBD_DQACQ 0x604
+ #define OBD_FAIL_OBD_DQACQ 0x604
lustre_fail mds 0x604
echo " Remove files on OST0"
rm -f $TESTFILE
[ $TOTAL_LIMIT -eq $LIMIT ] || error "total limits not recovery!"
echo " total limits = $TOTAL_LIMIT"
- OST0_UUID=`do_facet ost1 "$LCTL dl | grep -m1 obdfilter" | awk '{print $((NF-1))}'`
- [ -z "$OST0_UUID" ] && OST0_UUID=`do_facet ost1 "$LCTL dl | grep -m1 obdfilter" | awk '{print $((NF-1))}'`
+ OST0_UUID=`do_facet ost1 "$LCTL dl | grep -m1 obdfilter" | awk '{print $((NF-1))}'`
+ [ -z "$OST0_UUID" ] && OST0_UUID=`do_facet ost1 "$LCTL dl | grep -m1 obdfilter" | awk '{print $((NF-1))}'`
OST0_LIMIT="`$LFS quota -o $OST0_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $3 }'`"
[ $OST0_LIMIT -eq $BUNIT_SZ ] || error "high limits not released!"
echo " limits on $OST0_UUID = $OST0_LIMIT"
chmod 0777 $DIR/$tdir
local duration=""
[ "$SLOW" = "no" ] && duration=" -t 120"
- $RUNAS bash rundbench -D $DIR/$tdir 3 $duration || error "dbench failed!"
+ $RUNAS bash rundbench -D $DIR/$tdir 3 $duration || quota_error a $TSTUSR "dbench failed!"
+ rm -rf $DIR/$tdir
sync; sleep 3; sync;
return 0
mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
- TESTFILE="$DIR/$tdir/$tfile-0"
+ TESTFILE="$DIR/$tdir/$tfile-0"
- BLK_LIMIT=$((100 * KB * KB)) # 100G
- FILE_LIMIT=1000000
- echo " Set block limit $BLK_LIMIT kbytes to $TSTUSR.$TSTUSR"
+ BLK_LIMIT=$((100 * KB * KB)) # 100G
+ FILE_LIMIT=1000000
+ echo " Set block limit $BLK_LIMIT kbytes to $TSTUSR.$TSTUSR"
- log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for user: $TSTUSR"
- $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
- log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for group: $TSTUSR"
- $LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
+ log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for user: $TSTUSR"
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
+ log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for group: $TSTUSR"
+ $LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
- echo " Set stripe"
- $LFS setstripe $TESTFILE -c 1
- touch $TESTFILE
- chown $TSTUSR.$TSTUSR $TESTFILE
+ quota_show_check a u $TSTUSR
+ quota_show_check a g $TSTUSR
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
+ echo " Set stripe"
+ $LFS setstripe $TESTFILE -c 1
+ touch $TESTFILE
+ chown $TSTUSR.$TSTUSR $TESTFILE
- log " Write the big file of 4.5G ..."
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$blksize count=$((size_file / blksize)) || \
- error "(usr) write 4.5G file failure, but expect success"
+ log " Write the big file of 4.5G ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$blksize count=$((size_file / blksize)) || \
+ quota_error a $TSTUSR "(usr) write 4.5G file failure, but expect success"
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
- log " delete the big file of 4.5G..."
- $RUNAS rm -f $TESTFILE
+ log " delete the big file of 4.5G..."
+ $RUNAS rm -f $TESTFILE
sync; sleep 3; sync;
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
- RC=$?
+ RC=$?
set_blk_unitsz $((128 * 1024))
set_blk_tunesz $((128 * 1024 / 2))
- return $RC
+ return $RC
}
run_test_with_stat 9 "run for fixing bug10707(64bit) ==========="
log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for group: $TSTUSR"
$LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
+ quota_show_check a u $TSTUSR
+ quota_show_check a g $TSTUSR
+
echo " Set stripe"
$LFS setstripe $TESTFILE -c 1
touch $TESTFILE
chown $TSTUSR.$TSTUSR $TESTFILE
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
+ log " Write the big file of 4.5 G ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$blksize count=$((size_file / blksize)) || \
+ quota_error a $TSTUSR "(usr) write 4.5 G file failure, but expect success"
- log " Write the big file of 4.5 G ..."
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$blksize count=$((size_file / blksize)) || \
- error "(usr) write 4.5 G file failure, but expect success"
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
-
- log " delete the big file of 4.5 G..."
- $RUNAS rm -f $TESTFILE
+ log " delete the big file of 4.5 G..."
+ $RUNAS rm -f $TESTFILE
sync; sleep 3; sync;
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
RC=$?
}
#run_test_with_stat 10 "run for fixing bug10707(32bit) ==========="
-test_11() {
- wait_delete_completed
-
- #prepare the test
- block_limit=`(echo 0; df -t lustre -P | awk '{print $(NF - 4)}') | tail -n 1`
- echo $block_limit
- orig_dbr=`sysctl -n vm.dirty_background_ratio`
- orig_dec=`sysctl -n vm.dirty_expire_centisecs`
- orig_dr=`sysctl -n vm.dirty_ratio`
- orig_dwc=`sysctl -n vm.dirty_writeback_centisecs`
- sysctl -w vm.dirty_background_ratio=1
- sysctl -w vm.dirty_expire_centisecs=30
- sysctl -w vm.dirty_ratio=1
- sysctl -w vm.dirty_writeback_centisecs=50
- TESTDIR="$DIR/$tdir"
- local RV=0
-
- #do the test
- local SECS=0
- local REPS=3
- [ "$SLOW" = no ] && REPS=1
- local sleep=20
- local i=1
- while [ $i -le $REPS ]; do
- echo "test: cycle($i of $REPS) start at $(date)"
- mkdir -p $TESTDIR && chmod 777 $TESTDIR
- echo -n " create a file for uid "
- for j in `seq 1 30`; do
- echo -n "$j "
- # 30MB per dd for a total of 900MB (if space even permits)
- runas -u $j dd if=/dev/zero of=$TESTDIR/$tfile bs=$blksize count=15 > /dev/null 2>&1 &
- done
- echo ""
- PROCS=$(ps -ef | grep -v grep | grep "dd if /dev/zero of $TESTDIR" | wc -l)
- LAST_USED=0
- while [ $PROCS -gt 0 ]; do
- sleep 20
- SECS=$((SECS + sleep))
- PROCS=$(ps -ef | grep -v grep | grep "dd if /dev/zero of $TESTDIR" | wc -l)
- USED=$(du -s $TESTDIR | awk '{print $1}')
- PCT=$(($USED * 100 / $block_limit))
- echo "${i}/${REPS} ${PCT}% p${PROCS} t${SECS} "
- if [ $USED -le $LAST_USED ]; then
- kill -9 $(ps -ef | grep "dd if /dev/zero of $TESTDIR" | grep -v grep | awk '{ print $2 }')
- i=$REPS
- RV=2
- break
- fi
- LAST_USED=$USED
- done
- echo " removing the test files..."
- rm -f $TESTDIR/$tfile
- echo "cycle $i done at $(date)"
- i=$[$i+1]
- done
- echo "Test took $SECS sec"
-
- #clean
- sysctl -w vm.dirty_background_ratio=$orig_dbr
- sysctl -w vm.dirty_expire_centisecs=$orig_dec
- sysctl -w vm.dirty_ratio=$orig_dr
- sysctl -w vm.dirty_writeback_centisecs=$orig_dwc
- if [ $RV -ne 0 ]; then
- error "Nothing was written for $SECS sec ... aborting"
- fi
- return $RV
-}
-run_test_with_stat 11 "run for fixing bug10912 ==========="
-
-
# test a deadlock between quota and journal b=11693
test_12() {
mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
[ "$(grep $DIR2 /proc/mounts)" ] || mount_client $DIR2 || \
- { skip "Need lustre mounted on $MOUNT2 " && retutn 0; }
+ { skip_env "Need lustre mounted on $MOUNT2 " && retutn 0; }
LIMIT=$(( $BUNIT_SZ * $(($OSTCOUNT + 1)) * 10)) # 10 bunits each sever
TESTFILE="$DIR/$tdir/$tfile-0"
$LFS setstripe $TESTFILE -i 0 -c 1
chown $TSTUSR.$TSTUSR $TESTFILE
$LFS setstripe $TESTFILE2 -i 0 -c 1
- chown $TSTUSR2.$TSTUSR2 $TESTFILE2
+ chown $TSTUSR2.$TSTUSR2 $TESTFILE2
#define OBD_FAIL_OST_HOLD_WRITE_RPC 0x21f
- #define OBD_FAIL_SOME 0x10000000 /* fail N times */
- lustre_fail ost $((0x0000021f | 0x10000000)) 1
+ #define OBD_FAIL_SOME 0x10000000 /* fail N times */
+ lustre_fail ost $((0x0000021f | 0x10000000)) 1
echo " step1: write out of block quota ..."
$RUNAS2 dd if=/dev/zero of=$TESTFILE2 bs=$BLK_SZ count=102400 &
DDPID=$!
echo " step2: testing ......"
- count=0
- while [ true ]; do
- if ! ps -p ${DDPID1} > /dev/null 2>&1; then break; fi
- count=$[count+1]
- if [ $count -gt 64 ]; then
+ local last_size=$(stat -c %s $TESTFILE2)
+ local stall_secs=0
+ local start_secs=$SECONDS
+ while [ -d /proc/${DDPID1} ]; do
+ local size=$(stat -c %s $TESTFILE2)
+ if [ $size -eq $last_size ]; then
+ stall_secs=$[stall_secs+1]
+ else
+ stall_secs=0
+ fi
+ if [ $stall_secs -gt 30 ]; then
lustre_fail ost 0
- error "dd should be finished!"
+ quota_error u $TSTUSR2 "giving up: dd stalled (i.e. made no progress) for 30 seconds!"
fi
+ last_size=$size
sleep 1
done
- echo "(dd_pid=$DDPID1, time=$count)successful"
+ echo "(dd_pid=$DDPID1, time=$((SECONDS-start_secs)))successful"
#Recover fail_loc and dd will finish soon
lustre_fail ost 0
if ! ps -p ${DDPID} > /dev/null 2>&1; then break; fi
count=$[count+1]
if [ $count -gt 150 ]; then
- error "dd should be finished!"
+ quota_error u $TSTUSR "dd should be finished!"
fi
sleep 1
done
echo "(dd_pid=$DDPID, time=$count)successful"
rm -f $TESTFILE $TESTFILE2
- sync; sleep 3; sync;
+ sync; sleep 3; sync;
resetquota -u $TSTUSR
}
echo " User quota (limit: $LIMIT kbytes)"
$LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
- $SHOW_QUOTA_USER
+ quota_show_check b u $TSTUSR
$LFS setstripe $TESTFILE -i 0 -c 1
chown $TSTUSR.$TSTUSR $TESTFILE
$LFS setstripe $TESTFILE.2 -i 0 -c 1
- chown $TSTUSR.$TSTUSR $TESTFILE.2
+ chown $TSTUSR.$TSTUSR $TESTFILE.2
echo " step1: write out of block quota ..."
# one bunit will give mds
if ! ps -p ${DDPID} > /dev/null 2>&1; then break; fi
count=$[count+1]
if [ $count -gt 64 ]; then
- error "dd should be finished!"
+ quota_error u $TSTUSR "dd should be finished!"
fi
sleep 1
done
if ! ps -p ${DDPID1} > /dev/null 2>&1 ; then break; fi
count=$[count+1]
if [ $count -gt 64 ]; then
- error "dd should be finished!"
+ quota_error u $TSTUSR "dd should be finished!"
fi
sleep 1
done
fz2=`stat -c %s $TESTFILE.2`
$SHOW_QUOTA_USER
[ $((fz + fz2)) -lt $((BUNIT_SZ * BLK_SZ * 10)) ] && \
- error "files too small $fz + $fz2 < $((BUNIT_SZ * BLK_SZ * 10))"
+ quota_error u $TSTUSR "files too small $fz + $fz2 < $((BUNIT_SZ * BLK_SZ * 10))"
rm -f $TESTFILE $TESTFILE.2
sync; sleep 3; sync;
run_test_with_stat 13 "test multiple clients write block quota ==="
check_if_quota_zero(){
- line=`$LFS quota -v -$1 $2 $DIR | wc -l`
+ line=`$LFS quota -v -$1 $2 $DIR | wc -l`
for i in `seq 3 $line`; do
if [ $i -eq 3 ]; then
field="3 4 6 7"
fi
for j in $field; do
tmp=`$LFS quota -v -$1 $2 $DIR | sed -n ${i}p |
- awk '{print $'"$j"'}'`
+ awk '{print $'"$j"'}'`
[ -n "$tmp" ] && [ $tmp -ne 0 ] && $LFS quota -v -$1 $2 $DIR && \
error "quota on $2 isn't clean"
done
test_14a() { # was test_14 b=12223 -- setting quota on root
TESTFILE="$DIR/$tdir/$tfile"
- # reboot the lustre
- sync; sleep 5; sync
- cleanup_and_setup_lustre
- test_0
+ # reboot the lustre
+ sync; sleep 5; sync
+ cleanup_and_setup_lustre
+ quota_init
mkdir -p $DIR/$tdir
# out of root's file and block quota
$LFS setquota -u root -b 10 -B 10 -i 10 -I 10 $DIR
createmany -m ${TESTFILE} 20 || \
- error "unexpected: user(root) create files failly!"
+ quota_error u root "unexpected: user(root) create files failly!"
dd if=/dev/zero of=$TESTFILE bs=4k count=4096 || \
- error "unexpected: user(root) write files failly!"
+ quota_error u root "unexpected: user(root) write files failly!"
chmod 666 $TESTFILE
$RUNAS dd if=/dev/zero of=${TESTFILE} seek=4096 bs=4k count=4096 && \
- error "unexpected: user(quota_usr) write a file successfully!"
+ quota_error u root "unexpected: user(quota_usr) write a file successfully!"
# trigger the llog
chmod 777 $DIR
}
run_test_with_stat 14a "test setting quota on root ==="
-# save quota version (both administrative and operational quotas)
-quota_save_version() {
- do_facet mgs "lctl conf_param ${FSNAME}-MDT*.mdd.quota_type=$1"
- do_facet mgs "lctl conf_param ${FSNAME}-OST*.ost.quota_type=$1"
- sleep 5
-}
-
test_15(){
- LIMIT=$((24 * 1024 * 1024 * 1024 * 1024)) # 24 TB
- PATTERN="`echo $DIR | sed 's/\//\\\\\//g'`"
+ LIMIT=$((24 * 1024 * 1024 * 1024 * 1024)) # 24 TB
+ PATTERN="`echo $DIR | sed 's/\//\\\\\//g'`"
wait_delete_completed
- # test for user
- $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
- TOTAL_LIMIT="`$LFS quota -v -u $TSTUSR $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $4 }'`"
- [ $TOTAL_LIMIT -eq $LIMIT ] || error " (user)total limits = $TOTAL_LIMIT; limit = $LIMIT, failed!"
- echo " (user)total limits = $TOTAL_LIMIT; limit = $LIMIT, successful!"
+ # test for user
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ TOTAL_LIMIT="`$LFS quota -v -u $TSTUSR $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $4 }'`"
+ [ $TOTAL_LIMIT -eq $LIMIT ] || error " (user)total limits = $TOTAL_LIMIT; limit = $LIMIT, failed!"
+ echo " (user)total limits = $TOTAL_LIMIT; limit = $LIMIT, successful!"
resetquota -u $TSTUSR
- # test for group
- $LFS setquota -g $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
- TOTAL_LIMIT="`$LFS quota -v -g $TSTUSR $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $4 }'`"
- [ $TOTAL_LIMIT -eq $LIMIT ] || error " (group)total limits = $TOTAL_LIMIT; limit = $LIMIT, failed!"
- echo " (group)total limits = $TOTAL_LIMIT; limit = $LIMIT, successful!"
+ # test for group
+ $LFS setquota -g $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ TOTAL_LIMIT="`$LFS quota -v -g $TSTUSR $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $4 }'`"
+ [ $TOTAL_LIMIT -eq $LIMIT ] || error " (group)total limits = $TOTAL_LIMIT; limit = $LIMIT, failed!"
+ echo " (group)total limits = $TOTAL_LIMIT; limit = $LIMIT, successful!"
resetquota -g $TSTUSR
- $LFS quotaoff -ug $DIR
- do_facet $SINGLEMDS "lctl set_param lquota.mdd_obd-${FSNAME}-MDT*.quota_type=ug" | grep "error writing" && \
+ $LFS quotaoff -ug $DIR
+ do_facet $SINGLEMDS "lctl set_param lquota.mdd_obd-${FSNAME}-MDT*.quota_type=ug" | grep "error writing" && \
error "fail to set version for $SINGLEMDS"
- for j in `seq $OSTCOUNT`; do
- do_facet ost$j "lctl set_param lquota.${FSNAME}-OST*.quota_type=ug" | grep "error writing" && \
+ for j in `seq $OSTCOUNT`; do
+ do_facet ost$j "lctl set_param lquota.${FSNAME}-OST*.quota_type=ug" | grep "error writing" && \
error "fail to set version for ost$j"
- done
+ done
- echo "invalidating quota files"
- $LFS quotainv -ug $DIR
- $LFS quotainv -ugf $DIR
- $LFS quotacheck -ug $DIR
+ echo "invalidating quota files"
+ $LFS quotainv -ug $DIR
+ $LFS quotainv -ugf $DIR
+ $LFS quotacheck -ug $DIR
}
run_test_with_stat 15 "set block quota more than 4T ==="
echo " User quota (limit: $LIMIT kbytes)"
if [ $1 == "u" ]; then
$LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
- $SHOW_QUOTA_USER
+ quota_show_check b u $TSTUSR
else
$LFS setquota -g $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
- $SHOW_QUOTA_GROUP
+ quota_show_check b g $TSTUSR
fi
$LFS setstripe $TESTFILE -c 1
echo " Write ..."
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$((BUNIT_SZ * 4)) || \
- error "(usr) write failure, but expect success"
+ quota_error a $TSTUSR "(usr) write failure, but expect success"
echo " Done"
echo " Write out of block quota ..."
# this time maybe cache write, ignore it's failure
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$((BUNIT_SZ * 4)) || true
# flush cache, ensure noquota flag is setted on client
- cancel_lru_locks osc
+ cancel_lru_locks osc
if [ $2 -eq 1 ]; then
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$((BUNIT_SZ * 4)) || \
- error "(write failure, but expect success"
+ quota_error a $TSTUSR "(write failure, but expect success"
else
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$((BUNIT_SZ * 4)) && \
- error "(write success, but expect EDQUOT"
+ quota_error a $TSTUSR "(write success, but expect EDQUOT"
fi
rm -f $TESTFILE
set_blk_unitsz $((BUNIT_SZ * 4))
for i in u g; do
for j in 0 1; do
- # define OBD_FAIL_QUOTA_WITHOUT_CHANGE_QS 0xA01
+ # define OBD_FAIL_QUOTA_WITHOUT_CHANGE_QS 0xA01
echo " grp/usr: $i, adjust qunit: $j"
echo "-------------------------------"
[ $j -eq 1 ] && lustre_fail mds_ost 0
wait_delete_completed
- #define OBD_FAIL_QUOTA_RET_QDATA | OBD_FAIL_ONCE
+ #define OBD_FAIL_QUOTA_RET_QDATA | OBD_FAIL_ONCE
lustre_fail ost 0x80000A02
TESTFILE="$DIR/$tdir/$tfile-a"
log " Set enough high limit(block:$BLK_LIMIT) for group: $TSTUSR"
$LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I 0 $DIR
+ quota_show_check b u $TSTUSR
+ quota_show_check b g $TSTUSR
+
touch $TESTFILE
chown $TSTUSR.$TSTUSR $TESTFILE
touch $TESTFILE2
chown $TSTUSR.$TSTUSR $TESTFILE2
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
-
log " Write the test file1 ..."
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(( 10 * 1024 )) \
- || echo "write 10M file failure"
+ || quota_error a $TSTUSR "write 10M file failure"
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
log " write the test file2 ..."
$RUNAS dd if=/dev/zero of=$TESTFILE2 bs=$BLK_SZ count=$(( 10 * 1024 )) \
- || error "write 10M file failure"
+ || quota_error a $TSTUSR "write 10M file failure"
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
rm -f $TESTFILE $TESTFILE2
RC=$?
log " User quota (limit: $LIMIT kbytes)"
$LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $MOUNT
- $SHOW_QUOTA_USER
+ quota_show_check b u $TSTUSR
$LFS setstripe $TESTFILE -i 0 -c 1
chown $TSTUSR.$TSTUSR $TESTFILE
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$((1024 * 100)) &
DDPID=$!
- sleep 5
- lustre_fail mds 0
+ sleep 5
+ lustre_fail mds 0
echo " step2: testing ......"
count=0
- if at_is_valid && at_is_enabled; then
+ if at_is_enabled; then
timeout=$(at_max_get mds)
else
timeout=$(lctl get_param -n timeout)
if ! ps -p ${DDPID} > /dev/null 2>&1; then break; fi
count=$[count+1]
if [ $count -gt $((4 * $timeout)) ]; then
- error "count=$count dd should be finished!"
+ quota_error u $TSTUSR "count=$count dd should be finished!"
fi
sleep 1
done
- log "(dd_pid=$DDPID, time=$count, timeout=$timeout)"
-
- testfile_size=$(stat -c %s $TESTFILE)
- [ $testfile_size -ne $((BLK_SZ * 1024 * 100)) ] && \
- error "expect $((BLK_SZ * 1024 * 100)), got ${testfile_size}. Verifying file failed!"
- rm -f $TESTFILE
- sync; sleep 3; sync;
+ log "(dd_pid=$DDPID, time=$count, timeout=$timeout)"
+ sync
+ cancel_lru_locks mdc
+ cancel_lru_locks osc
+
+ testfile_size=$(stat -c %s $TESTFILE)
+ [ $testfile_size -ne $((BLK_SZ * 1024 * 100)) ] && \
+ quota_error u $TSTUSR "expect $((BLK_SZ * 1024 * 100)), got ${testfile_size}. Verifying file failed!"
+ $SHOW_QUOTA_USER
+ rm -f $TESTFILE
+ sync
resetquota -u $TSTUSR
-
set_blk_unitsz $((128 * 1024))
set_blk_tunesz $((128 * 1024 / 2))
}
# test when mds drops a quota req, the ost still could work well b=14840
test_18a() {
- LIMIT=$((100 * 1024 * 1024)) # 100G
+ LIMIT=$((100 * 1024 * 1024)) # 100G
TESTFILE="$DIR/$tdir/$tfile-a"
mkdir -p $DIR/$tdir
log " User quota (limit: $LIMIT kbytes)"
$LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $MOUNT
- $SHOW_QUOTA_USER
+ quota_show_check b u $TSTUSR
$LFS setstripe $TESTFILE -i 0 -c 1
chown $TSTUSR.$TSTUSR $TESTFILE
echo " step2: testing ......"
count=0
- if at_is_valid && at_is_enabled; then
+ if at_is_enabled; then
timeout=$(at_max_get mds)
else
timeout=$(lctl get_param -n timeout)
count=$[count+1]
if [ $count -gt $((6 * $timeout)) ]; then
lustre_fail mds 0
- error "count=$count dd should be finished!"
+ quota_error u $TSTUSR "count=$count dd should be finished!"
fi
sleep 1
done
- log "(dd_pid=$DDPID, time=$count, timeout=$timeout)"
-
- lustre_fail mds 0
+ log "(dd_pid=$DDPID, time=$count, timeout=$timeout)"
+ lustre_fail mds 0
rm -f $TESTFILE
- sync; sleep 3; sync;
+ sync
resetquota -u $TSTUSR
-
set_blk_unitsz $((128 * 1024))
set_blk_tunesz $((128 * 1024 / 2))
}
# test when mds do failover, the ost still could work well without trigger
# watchdog b=14840
test_18bc_sub() {
- type=$1
+ type=$1
- LIMIT=$((110 * 1024 )) # 110M
- TESTFILE="$DIR/$tdir/$tfile"
- mkdir -p $DIR/$tdir
+ LIMIT=$((110 * 1024 )) # 110M
+ TESTFILE="$DIR/$tdir/$tfile"
+ mkdir -p $DIR/$tdir
- wait_delete_completed
+ wait_delete_completed
- set_blk_tunesz 512
- set_blk_unitsz 1024
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
- log " User quota (limit: $LIMIT kbytes)"
- $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $MOUNT
- $SHOW_QUOTA_USER
+ log " User quota (limit: $LIMIT kbytes)"
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $MOUNT
+ quota_show_check b u $TSTUSR
- $LFS setstripe $TESTFILE -i 0 -c 1
- chown $TSTUSR.$TSTUSR $TESTFILE
+ $LFS setstripe $TESTFILE -i 0 -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
- timeout=$(sysctl -n lustre.timeout)
+ timeout=$(sysctl -n lustre.timeout)
if [ $type = "directio" ]; then
log " write 100M block(directio) ..."
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$((BLK_SZ * 1024)) count=100 &
fi
- DDPID=$!
- do_facet $SINGLEMDS "$LCTL conf_param ${FSNAME}-MDT*.mdd.quota_type=ug"
+ DDPID=$!
+ do_facet $SINGLEMDS "$LCTL conf_param ${FSNAME}-MDT*.mdd.quota_type=ug"
log "failing mds for $((2 * timeout)) seconds"
- fail $SINGLEMDS $((2 * timeout))
-
- # check if quotaon successful
- $LFS quota -u $TSTUSR $MOUNT 2>&1 | grep -q "quotas are not enabled"
- if [ $? -eq 0 ]; then
- error "quotaon failed!"
- rm -rf $TESTFILE
- return
- fi
+ fail $SINGLEMDS $((2 * timeout))
+
+ # check if quotaon successful
+ $LFS quota -u $TSTUSR $MOUNT 2>&1 | grep -q "quotas are not enabled"
+ if [ $? -eq 0 ]; then
+ error "quotaon failed!"
+ rm -rf $TESTFILE
+ return
+ fi
- count=0
- if at_is_valid && at_is_enabled; then
+ count=0
+ if at_is_enabled; then
timeout=$(at_max_get mds)
- else
+ else
timeout=$(lctl get_param -n timeout)
- fi
- while [ true ]; do
+ fi
+ while [ true ]; do
if ! ps -p ${DDPID} > /dev/null 2>&1; then break; fi
- if [ $((++count % (2 * timeout) )) -eq 0 ]; then
- log "it took $count second"
- fi
- sleep 1
- done
- log "(dd_pid=$DDPID, time=$count, timeout=$timeout)"
- sync; sleep 1; sync
+ if [ $((++count % (2 * timeout) )) -eq 0 ]; then
+ log "it took $count second"
+ fi
+ sleep 1
+ done
+ log "(dd_pid=$DDPID, time=$count, timeout=$timeout)"
+ sync
+ cancel_lru_locks mdc
+ cancel_lru_locks osc
+
+ testfile_size=$(stat -c %s $TESTFILE)
+ [ $testfile_size -ne $((BLK_SZ * 1024 * 100)) ] && \
+ quota_error u $TSTUSR "expect $((BLK_SZ * 1024 * 100)), got ${testfile_size}. Verifying file failed!"
+ $SHOW_QUOTA_USER
+ rm -f $TESTFILE
+ sync
- testfile_size=$(stat -c %s $TESTFILE)
- [ $testfile_size -ne $((BLK_SZ * 1024 * 100)) ] && \
- error "expect $((BLK_SZ * 1024 * 100)), got ${testfile_size}. Verifying file failed!"
- $SHOW_QUOTA_USER
- resetquota -u $TSTUSR
- rm -rf $TESTFILE
- sync; sleep 1; sync
+ resetquota -u $TSTUSR
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
}
# test when mds does failover, the ost still could work well
test_18bc_sub normal
test_18bc_sub directio
# check if watchdog is triggered
- do_facet ost1 dmesg > $TMP/lustre-log-${TESTNAME}.log
- watchdog=`awk '/test 18b/ {start = 1;}
- /Watchdog triggered/ {
- if (start) {
- print;
- }
- }' $TMP/lustre-log-${TESTNAME}.log`
+ do_facet ost1 dmesg > $TMP/lustre-log-${TESTNAME}.log
+ watchdog=`awk '/test 18b/ {start = 1;}
+ /Watchdog triggered/ {
+ if (start) {
+ print;
+ }
+ }' $TMP/lustre-log-${TESTNAME}.log`
[ `echo "$watchdog" | wc -l` -ge 3 ] && error "$watchdog"
rm -f $TMP/lustre-log-${TESTNAME}.log
}
echo " User quota (limit: $LIMIT kbytes)"
$LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $MOUNT
- $SHOW_QUOTA_USER
+ quota_show_check b u $TSTUSR
echo " Updating quota limits"
$LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $MOUNT
- $SHOW_QUOTA_USER
+ quota_show_check b u $TSTUSR
RUNDD="$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ"
- $RUNDD count=$BUNIT_SZ || error "(usr) write failure, but expect success"
+ $RUNDD count=$BUNIT_SZ || quota_error u $TSTUSR "(usr) write failure, but expect success"
# for now page cache of TESTFILE may still be dirty,
# let's push it to the corresponding OST, this will also
# cache NOQUOTA on the client from OST's reply
cancel_lru_locks osc
- $RUNDD seek=$BUNIT_SZ && error "(usr) write success, should be EDQUOT"
+ $RUNDD seek=$BUNIT_SZ && quota_error u $TSTUSR "(usr) write success, should be EDQUOT"
}
test_19() {
test_20()
{
- LSTR=(1t 2g 3m 4k) # limits strings
- LVAL=($[1*1024*1024*1024] $[2*1024*1024] $[3*1024*1024] $[4*1024]) # limits values
+ LSTR=(1t 2g 3m 4k) # limits strings
+ LVAL=($[1*1024*1024*1024] $[2*1024*1024] $[3*1024*1024] $[4*1024]) # limits values
- $LFS setquota -u $TSTUSR --block-softlimit ${LSTR[0]} \
- $MOUNT || error "could not set quota limits"
+ $LFS setquota -u $TSTUSR --block-softlimit ${LSTR[0]} \
+ $MOUNT || error "could not set quota limits"
- $LFS setquota -u $TSTUSR --block-hardlimit ${LSTR[1]} \
- --inode-softlimit ${LSTR[2]} \
- --inode-hardlimit ${LSTR[3]} \
- $MOUNT || error "could not set quota limits"
+ $LFS setquota -u $TSTUSR --block-hardlimit ${LSTR[1]} \
+ --inode-softlimit ${LSTR[2]} \
+ --inode-hardlimit ${LSTR[3]} \
+ $MOUNT || error "could not set quota limits"
- ($LFS quota -v -u $TSTUSR $MOUNT | \
- grep -E '^ *'$MOUNT' *[0-9]+\** *'${LVAL[0]}' *'${LVAL[1]}' *[0-9]+\** *'${LVAL[2]}' *'${LVAL[3]}) \
- || error "lfs quota output is unexpected"
+ ($LFS quota -v -u $TSTUSR $MOUNT | \
+ grep -E '^ *'$MOUNT' *[0-9]+\** *'${LVAL[0]}' *'${LVAL[1]}' *[0-9]+\** *'${LVAL[2]}' *'${LVAL[3]}) \
+ || error "lfs quota output is unexpected"
resetquota -u $TSTUSR
}
if ! ps -p ${DDPID1} > /dev/null 2>&1; then break; fi
count=$[count+1]
if [ $count -gt 60 ]; then
- error "dd should be finished!"
+ quota_error a $TSTUSR "dd should be finished!"
fi
sleep 1
done
if ! ps -p ${DDPID2} > /dev/null 2>&1; then break; fi
count=$[count+1]
if [ $count -gt 60 ]; then
- error "dd should be finished!"
+ quota_error a $TSTUSR "dd should be finished!"
fi
sleep 1
done
run_test_with_stat 21 "run for fixing bug16053 ==========="
test_22() {
- local SAVEREFORMAT
+ quota_save_version "ug3"
- SAVEREFORMAT=$REFORMAT
- $LFS quotaoff -ug $DIR || error "could not turn quotas off"
+ stopall
+ mount
+ setupall
- quota_save_version "ug"
+ echo "checking parameters"
- REFORMAT="reformat"
- stopall
- mount
- setupall
- REFORMAT=$SAVEREFORMAT
+ do_facet $SINGLEMDS "lctl get_param mdd.${FSNAME}-MDT*.quota_type" | grep "ug3" || error "admin failure"
+ do_facet ost1 "lctl get_param obdfilter.*.quota_type" | grep "ug3" || error "op failure"
- echo "checking parameters"
-
- do_facet $SINGLEMDS "lctl get_param mdd.${FSNAME}-MDT*.quota_type" | grep "ug" || error "admin failure"
- do_facet ost1 "lctl get_param obdfilter.*.quota_type" | grep "ug" || error "op failure"
-
- run_test 0 "reboot lustre"
+ quota_init
}
run_test_with_stat 22 "test if quota_type saved as permanent parameter ===="
log " User quota (limit: $LIMIT kbytes)"
$LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
sleep 3
- $SHOW_QUOTA_USER
+ quota_show_check b u $TSTUSR
$LFS setstripe $TESTFILE -c 1
chown $TSTUSR.$TSTUSR $TESTFILE
log " Step1: trigger quota with 0_DIRECT"
log " Write half of file"
- $RUNAS $DIRECTIO write $TESTFILE 0 $(($LIMIT/1024/2)) $bs_unit || error "(1) write failure, but expect success: $LIMIT"
+ $RUNAS $DIRECTIO write $TESTFILE 0 $(($LIMIT/1024/2)) $bs_unit || \
+ quota_error u $TSTUSR "(1) write failure, but expect success: $LIMIT"
log " Write out of block quota ..."
- $RUNAS $DIRECTIO write $TESTFILE $(($LIMIT/1024/2)) $(($LIMIT/1024/2)) $bs_unit && error "(2) write success, but expect EDQUOT: $LIMIT"
+ $RUNAS $DIRECTIO write $TESTFILE $(($LIMIT/1024/2)) $(($LIMIT/1024/2)) $bs_unit && \
+ quota_error u $TSTUSR "(2) write success, but expect EDQUOT: $LIMIT"
log " Step1: done"
log " Step2: rewrite should succeed"
- $RUNAS $DIRECTIO write $TESTFILE $(($LIMIT/1024/2)) 1 $bs_unit || error "(3) write failure, but expect success: $LIMIT"
+ $RUNAS $DIRECTIO write $TESTFILE 0 1 $bs_unit || \
+ quota_error u $TSTUSR "(3) write failure, but expect success: $LIMIT"
log " Step2: done"
rm -f $TESTFILE
OST0_QUOTA_USED=`$LFS quota -o $OST0_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
echo $OST0_QUOTA_USED
[ $OST0_QUOTA_USED -ne 0 ] && \
- ($SHOW_QUOTA_USER; error "quota deleted isn't released")
+ ($SHOW_QUOTA_USER; quota_error u $TSTUSR "quota deleted isn't released")
$SHOW_QUOTA_USER
resetquota -u $TSTUSR
}
set_blk_unitsz $((128 * 1024))
set_blk_tunesz $((128 * 1024 / 2))
-
+
}
run_test_with_stat 24 "test if lfs draws an asterix when limit is reached (16646) ==========="
log "setquota for $TSTUSR"
$LFS setquota $1 $TSTUSR -b $LIMIT -B $LIMIT -i 10 -I 10 $DIR
sleep 3
- show_quota $1 $TSTUSR
+ if [ "$1" == "-u" ]; then
+ quota_show_check a u $TSTUSR
+ else
+ quota_show_check a g $TSTUSR
+ fi
# set quota for $TSTUSR2
log "setquota for $TSTUSR2"
$LFS setquota $1 $TSTUSR2 -b $LIMIT -B $LIMIT -i 10 -I 10 $DIR
sleep 3
- show_quota $1 $TSTUSR2
+ if [ "$1" == "-u" ]; then
+ quota_show_check a u $TSTUSR2
+ else
+ quota_show_check a g $TSTUSR2
+ fi
# set stripe index to 0
log "setstripe for $DIR/$tdir to 0"
# TSTUSR write 4M
log "$TSTUSR write 4M to $TESTFILE"
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=4K count=1K || error "dd failed"
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=4K count=1K || quota_error a $TSTUSR "dd failed"
sync
show_quota $1 $TSTUSR
show_quota $1 $TSTUSR2
MDS_QUOTA_USED_NEW=`$LFS quota -o $MDS_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
[ $MDS_QUOTA_USED_NEW -ne $((MDS_QUOTA_USED_OLD + 1)) ] && \
- error "$TSTUSR inode quota usage error: [$MDS_QUOTA_USED_OLD|$MDS_QUOTA_USED_NEW]"
+ quota_error a $TSTUSR "$TSTUSR inode quota usage error: [$MDS_QUOTA_USED_OLD|$MDS_QUOTA_USED_NEW]"
OST0_QUOTA_USED_NEW=`$LFS quota -o $OST0_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
OST0_QUOTA_USED_DELTA=$((OST0_QUOTA_USED_NEW - OST0_QUOTA_USED_OLD))
[ $OST0_QUOTA_USED_DELTA -lt 4096 ] && \
- error "$TSTUSR block quota usage error: [$OST0_QUOTA_USED_OLD|$OST0_QUOTA_USED_NEW]"
+ quota_error a $TSTUSR "$TSTUSR block quota usage error: [$OST0_QUOTA_USED_OLD|$OST0_QUOTA_USED_NEW]"
# chown/chgrp from $TSTUSR to $TSTUSR2
if [ $1 = "-u" ]; then
log "chown from $TSTUSR to $TSTUSR2"
- chown $TSTUSR2 $TESTFILE || error "chown failed"
+ chown $TSTUSR2 $TESTFILE || quota_error u $TSTUSR2 "chown failed"
else
log "chgrp from $TSTUSR to $TSTUSR2"
- chgrp $TSTUSR2 $TESTFILE || error "chgrp failed"
+ chgrp $TSTUSR2 $TESTFILE || quota_error g $TSTUSR2 "chgrp failed"
fi
sync
show_quota $1 $TSTUSR
show_quota $1 $TSTUSR2
MDS_QUOTA_USED2_NEW=`$LFS quota -o $MDS_UUID $1 $TSTUSR2 $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
[ $MDS_QUOTA_USED2_NEW -ne $((MDS_QUOTA_USED2_OLD + 1)) ] && \
- error "$TSTUSR2 inode quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$MDS_QUOTA_USED2_OLD|$MDS_QUOTA_USED2_NEW]"
+ quota_error a $TSTUSR2 "$TSTUSR2 inode quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$MDS_QUOTA_USED2_OLD|$MDS_QUOTA_USED2_NEW]"
OST0_QUOTA_USED2_NEW=`$LFS quota -o $OST0_UUID $1 $TSTUSR2 $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ # when chown, the quota on ost could be displayed out of quota temporarily. Delete the '*' in this situation. b=20433
+ OST0_QUOTA_USED2_NEW=${OST0_QUOTA_USED2_NEW%\*}
OST0_QUOTA_USED2_DELTA=$((OST0_QUOTA_USED2_NEW - OST0_QUOTA_USED2_OLD))
[ $OST0_QUOTA_USED2_DELTA -ne $OST0_QUOTA_USED_DELTA ] && \
- error "$TSTUSR2 block quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$OST0_QUOTA_USED2_OLD|$OST0_QUOTA_USED2_NEW]"
+ quota_error a $TSTUSR2 "$TSTUSR2 block quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$OST0_QUOTA_USED2_OLD|$OST0_QUOTA_USED2_NEW]"
MDS_QUOTA_USED_NEW=`$LFS quota -o $MDS_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
[ $MDS_QUOTA_USED_NEW -ne $MDS_QUOTA_USED_OLD ] && \
- error "$TSTUSR inode quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$MDS_QUOTA_USED_OLD|$MDS_QUOTA_USED_NEW]"
+ quota_error a $TSTUSR "$TSTUSR inode quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$MDS_QUOTA_USED_OLD|$MDS_QUOTA_USED_NEW]"
OST0_QUOTA_USED_NEW=`$LFS quota -o $OST0_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
[ $OST0_QUOTA_USED_NEW -ne $OST0_QUOTA_USED_OLD ] && \
- error "$TSTUSR block quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$OST0_QUOTA_USED_OLD|$OST0_QUOTA_USED_NEW]"
+ quota_error a $TSTUSR "$TSTUSR block quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$OST0_QUOTA_USED_OLD|$OST0_QUOTA_USED_NEW]"
rm -f $TESTFILE
wait_delete_completed
}
run_test_with_stat 25 "test whether quota usage is transfered when chown/chgrp (18081) ==========="
-# turn off quota
-test_99()
+test_26() {
+ mkdir -p $DIR/$tdir
+ chmod 0777 $DIR/$tdir
+ TESTFILE="$DIR/$tdir/$tfile-0"
+ TESTFILE2="$DIR/$tdir/$tfile-1"
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+
+ wait_delete_completed
+
+ # every quota slave gets 20MB
+ b_limit=$(((OSTCOUNT + 1) * 20 * 1024))
+ log "limit: ${b_limit}KB"
+ $LFS setquota -u $TSTUSR -b 0 -B $b_limit -i 0 -I 0 $DIR
+ sleep 3
+ quota_show_check b u $TSTUSR
+
+ $LFS setstripe $TESTFILE -c 1 -i 0
+ $LFS setstripe $TESTFILE2 -c 1 -i 0
+ chown $TSTUSR.$TSTUSR $TESTFILE
+ chown $TSTUSR.$TSTUSR $TESTFILE2
+
+ #define OBD_FAIL_QUOTA_DELAY_REL 0xA03
+ lustre_fail ost 0xA03
+
+ log " Write the first file..."
+ $RUNAS $DIRECTIO write $TESTFILE 0 10 $((BLK_SZ * 1024)) || quota_error u $TSTUSR "write failure, but expect success"
+ log " Delete the first file..."
+ rm -f $TESTFILE
+
+
+ wait_delete_completed
+
+ log " Write the second file..."
+ $RUNAS $DIRECTIO write $TESTFILE2 0 10 $((BLK_SZ * 1024)) || quota_error u $TSTUSR "write failure, but expect success"
+ log " Delete the second file..."
+ rm -f $TESTFILE2
+
+ lustre_fail ost 0
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+ resetquota -u $TSTUSR
+}
+run_test_with_stat 26 "test for false quota error(bz18491) ======================================"
+
+test_27a() {
+ $LFS quota $TSTUSR $DIR && error "lfs succeeded with no type, but should have failed"
+ $LFS setquota $TSTUSR $DIR && error "lfs succeeded with no type, but should have failed"
+ return 0
+}
+run_test_with_stat 27a "lfs quota/setquota should handle wrong arguments (19612) ================="
+
+test_27b() {
+ $LFS setquota -u $TSTID -b 1000 -B 1000 -i 1000 -I 1000 $DIR || \
+ error "lfs setquota failed with uid argument"
+ $LFS setquota -g $TSTID -b 1000 -B 1000 -i 1000 -I 1000 $DIR || \
+ error "lfs stequota failed with gid argument"
+ $SHOW_QUOTA_USERID || error "lfs quota failed with uid argument"
+ $SHOW_QUOTA_GROUPID || error "lfs quota failed with gid argument"
+ resetquota -u $TSTUSR
+ resetquota -g $TSTUSR
+ return 0
+}
+run_test 27b "lfs quota/setquota should handle user/group ID (20200) ================="
+
+test_28() {
+ BLK_LIMIT=$((100 * 1024 * 1024)) # 100G
+ echo "Step 1: set enough high limit for user [$TSTUSR:$BLK_LIMIT]"
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I 0 $DIR
+ $SHOW_QUOTA_USER
+
+ echo "Step 2: reset system ..."
+ cleanup_and_setup_lustre
+ quota_init
+
+ echo "Step 3: change qunit for user [$TSTUSR:512:1024]"
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+
+ wait_delete_completed
+
+ #define OBD_FAIL_QUOTA_RET_QDATA | OBD_FAIL_ONCE
+ lustre_fail ost 0x80000A02
+
+ TESTFILE="$DIR/$tdir/$tfile"
+ mkdir -p $DIR/$tdir
+
+ BLK_LIMIT=$((100 * 1024)) # 100M
+ echo "Step 4: set enough high limit for user [$TSTUSR:$BLK_LIMIT]"
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I 0 $DIR
+ $SHOW_QUOTA_USER
+
+ touch $TESTFILE
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
+ echo "Step 5: write the test file1 [10M] ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(( 10 * 1024 )) \
+ || quota_error a $TSTUSR "write 10M file failure"
+ $SHOW_QUOTA_USER
+
+ rm -f $TESTFILE
+ sync; sleep 3; sync;
+
+ # make qd_count 64 bit
+ lustre_fail ost 0
+
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+
+ resetquota -u $TSTUSR
+}
+run_test_with_stat 28 "test for consistency for qunit when setquota (18574) ==========="
+
+test_30()
{
- $LFS quotaoff $DIR
- lctl set_param debug="-quota"
+ local output
+ local LIMIT=1024
+ local TESTFILE="$DIR/$tdir/$tfile"
+ local GRACE=10
+
+ mkdir -p $DIR/$tdir
+ chmod 0777 $DIR/$tdir
+
+ $LFS setquota -t -u --block-grace $GRACE --inode-grace $MAX_IQ_TIME $DIR
+ $LFS setquota -u $TSTUSR -b $LIMIT -B 0 -i 0 -I 0 $DIR
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=1024 count=$((LIMIT * 2)) || true
+ cancel_lru_locks osc
+ sleep 5
+ $LFS setquota -u $TSTUSR -B 0 $DIR
+ output=`$SHOW_QUOTA_USER | grep $MOUNT | awk '{ print $5 }' | tr -d s`
+ [ "$output" -le "$((GRACE - 5))" ] || error "grace times were reset or unexpectedly high latency"
+ rm -f $TESTFILE
+ resetquota -u $TSTUSR
+ $LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace $MAX_IQ_TIME $DIR
+}
+run_test_with_stat 30 "hard limit updates should not reset grace times ================"
- return 0
+test_29()
+{
+ local BLK_LIMIT=$((100 * 1024 * 1024)) # 100G
+ local timeout
+ local pid
+ local origin_resends
+
+ if at_is_enabled; then
+ timeout=$(at_max_get client)
+ at_max_set 10 client
+ else
+ timeout=$(lctl get_param -n timeout)
+ lctl set_param timeout=10
+ fi
+
+ origin_resends=$(lctl get_param -n mdc.${FSNAME}-*.quota_resend_count | head -1)
+ lctl set_param -n mdc.${FSNAME}-*.quota_resend_count 0
+
+ #define OBD_FAIL_MDS_QUOTACTL_NET 0x12e
+ lustre_fail mds 0x12e
+
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I 0 $DIR & pid=$!
+
+ echo "sleeping for $((10 * 2)) seconds"
+ sleep $((10 * 2))
+ ps -p $pid && error "lfs hadn't finished by timeout"
+ wait $pid && error "succeeded, but should have failed"
+
+ lustre_fail mds 0
+
+ if at_is_enabled; then
+ at_max_set $timeout client
+ else
+ lctl set_param timeout=$timeout
+ fi
+
+ lctl set_param -n mdc.${FSNAME}-*.quota_resend_count $origin_resends
+ resetquota -u $TSTUSR
}
-run_test_with_stat 99 "Quota off ==============================="
+run_test_with_stat 29 "unhandled quotactls must not hang lustre client (19778) ========"
+# turn off quota
+quota_fini()
+{
+ $LFS quotaoff $DIR
+ do_nodes $(comma_list $(nodes_list)) "lctl set_param debug=-quota"
+}
+quota_fini
log "cleanup: ======================================================"
cd $ORIG_PWD
git://git.whamcloud.com / fs / lustre-release.git / blobdiff