init_logging
ALWAYS_EXCEPT="$SANITY_QUOTA_EXCEPT "
-# Bug number for skipped test: LU-5152
-ALWAYS_EXCEPT+=" 55"
+# Bug number for skipped test:
+ALWAYS_EXCEPT+=""
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
# Test duration: 30 min
MAX_DQ_TIME=604800
MAX_IQ_TIME=604800
QTYPE="ugp"
-# QP exists since this version. Should be finally set before landing.
VERSION_WITH_QP="2.13.53"
mds_supports_qp() {
[ $MDS1_VERSION -lt $(version_code $VERSION_WITH_QP) ] &&
quota_scan() {
local local_ugp=$1
local local_id=$2
+ local count
if [ "$local_ugp" == "a" -o "$local_ugp" == "u" ]; then
$LFS quota -v -u $local_id $DIR
- log "Files for user ($local_id):"
+ count=$($LFS find --user $local_id $DIR | wc -l)
+ log "Files for user ($local_id), count=$count:"
($LFS find --user $local_id $DIR | head -n 4 |
xargs stat 2>/dev/null)
fi
if [ "$local_ugp" == "a" -o "$local_ugp" == "g" ]; then
$LFS quota -v -g $local_id $DIR
- log "Files for group ($local_id):"
+ count=$($LFS find --group $local_id $DIR | wc -l)
+ log "Files for group ($local_id), count=$count:"
($LFS find --group $local_id $DIR | head -n 4 |
xargs stat 2>/dev/null)
fi
is_project_quota_supported || return 0
if [ "$local_ugp" == "a" -o "$local_ugp" == "p" ]; then
$LFS quota -v -p $TSTPRJID $DIR
- log "Files for project ($TSTPRJID):"
+ count=$($LFS find --projid $TSTPRJID $DIR | wc -l)
+ log "Files for project ($TSTPRJID), count=$count:"
($LFS find --projid $TSTPRJID $DIR | head -n 4 |
xargs stat 2>/dev/null)
fi
if [[ $PERM_CMD == *"set_param -P"* ]]; then
do_facet mgs $PERM_CMD \
- osd-*.$FSNAME-MDT*.quota_slave.enable=$qtype
+ osd-*.$FSNAME-MDT*.quota_slave.enabled=$qtype
else
do_facet mgs $PERM_CMD $FSNAME.quota.mdt=$qtype
fi
if [[ $PERM_CMD == *"set_param -P"* ]]; then
do_facet mgs $PERM_CMD \
- osd-*.$FSNAME-OST*.quota_slave.enable=$qtype
+ osd-*.$FSNAME-OST*.quota_slave.enabled=$qtype
else
do_facet mgs $PERM_CMD $FSNAME.quota.ost=$qtype
fi
}
setup_quota_test() {
- local mdt=${1:-0}
wait_delete_completed
echo "Creating test directory"
- $LFS mkdir -i $mdt -c 1 $DIR/$tdir || return 1
+ mkdir_on_mdt0 $DIR/$tdir || return 1
chmod 0777 $DIR/$tdir || return 2
# always clear fail_loc in case of fail_loc isn't cleared
# properly when previous test failed
lustre_fail mds_ost 0
+ stack_trap cleanup_quota_test EXIT
}
cleanup_quota_test() {
echo "Delete files..."
rm -rf $DIR/$tdir
+ [ -d $DIR/${tdir}_dom ] && rm -rf $DIR/${tdir}_dom
echo "Wait for unlink objects finished..."
wait_delete_completed
sync_all_data || true
skip "not enough space ${free_space} KB, " \
"required $((MB * 1024)) KB"
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
set_ost_qtype "none" || error "disable ost quota failed"
test_quota_performance $MB
$LFS setquota -u $TSTUSR -b 0 -B 10G -i 0 -I 0 $DIR ||
error "set quota failed"
test_quota_performance $MB
-
- cleanup_quota_test
}
run_test 0 "Test basic quota performance"
cancel_lru_locks osc
sync; sync_all_data || true
# sync means client wrote all it's cache, but id doesn't
- # garantee that slave got new edquot trough glimpse.
+ # guarantee that slave received new edquot through glimpse.
# so wait a little to be sure slave got it.
sleep 5
$RUNAS $DD of=$testfile count=1 seek=$limit &&
quota_error $short_qtype $TSTUSR \
"user write success, but expect EDQUOT"
+ return 0
}
check_write_fallocate() {
local testfile="$DIR/$tdir/$tfile-0"
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
# enable ost quota
set_ost_qtype $QTYPE || error "enable ost quota failed"
if ! is_project_quota_supported; then
echo "Project quota is not supported"
- cleanup_quota_test
return 0
fi
mds_supports_qp
setup_quota_test || error "setup quota failed with $?"
- stack_trap cleanup_quota_test EXIT
# enable ost quota
set_ost_qtype $QTYPE || error "enable ost quota failed"
pool_add_targets $qpool 0 $(($OSTCOUNT - 1)) ||
error "pool_add_targets failed"
+ # check qmt_pool_add dmesg error
+ local msg_rgx="QMT0000: can't add to $FSNAME-OST0000.*pool.*$qpool"
+ local dmesg_err
+ dmesg_err=$(do_facet mds1 dmesg | grep "$msg_rgx" | tail -1)
+ [[ -z "$dmesg_err" ]] || error "found qmt_pool_add error: $dmesg_err"
+
$LFS setquota -u $TSTUSR -B ${limit}M --pool $qpool $DIR ||
error "set user quota failed"
if ! is_project_quota_supported; then
echo "Project quota is not supported"
- cleanup_quota_test
return 0
fi
mds_supports_qp
setup_quota_test || error "setup quota failed with $?"
- stack_trap cleanup_quota_test EXIT
# enable ost quota
set_ost_qtype $QTYPE || error "enable ost quota failed"
sync_all_data || true
used=$(getquota -u $TSTUSR global curspace $qpool1)
- [ $used -ne 0 ] && quota_error u $TSTUSR \
+ [ $used -eq 0 ] || quota_error u $TSTUSR \
"user quota isn't released after deletion"
- resetquota -u $TSTUSR
-
- # cleanup
- cleanup_quota_test
}
run_test 1c "Quota pools: check 3 pools with hardlimit only for global"
mds_supports_qp
setup_quota_test || error "setup quota failed with $?"
- stack_trap cleanup_quota_test EXIT
# enable ost quota
set_ost_qtype $QTYPE || error "enable ost quota failed"
sync_all_data || true
used=$(getquota -u $TSTUSR global curspace $qpool1)
- [ $used -ne 0 ] && quota_error u $TSTUSR \
+ [ $used -eq 0 ] || quota_error u $TSTUSR \
"user quota isn't released after deletion"
- resetquota -u $TSTUSR
-
- # cleanup
- cleanup_quota_test
}
run_test 1d "Quota pools: check block hardlimit on different pools"
mds_supports_qp
setup_quota_test || error "setup quota failed with $?"
- stack_trap cleanup_quota_test EXIT
# enable ost quota
set_ost_qtype $QTYPE || error "enable ost quota failed"
sync_all_data || true
used=$(getquota -u $TSTUSR global curspace $qpool1)
- [ $used -ne 0 ] && quota_error u $TSTUSR \
+ [ $used -eq 0 ] || quota_error u $TSTUSR \
"user quota isn't released after deletion"
- resetquota -u $TSTUSR
-
- # cleanup
- cleanup_quota_test
}
run_test 1e "Quota pools: global pool high block limit vs quota pool with small"
mds_supports_qp
setup_quota_test || error "setup quota failed with $?"
- stack_trap cleanup_quota_test EXIT
# enable ost quota
set_ost_qtype $QTYPE || error "enable ost quota failed"
# became > 10M. QMT returned EINPROGRESS in a loop.
# Check that it doesn't hung anymore.
test_1_check_write $testfile "user" $limit1
-
- # cleanup
- cleanup_quota_test
}
run_test 1f "Quota pools: correct qunit after removing/adding OST"
mds_supports_qp
setup_quota_test || error "setup quota failed with $?"
- stack_trap cleanup_quota_test EXIT
$LCTL set_param $mdmb_param=1
stack_trap "$LCTL set_param $mdmb_param=$max_dirty_mb" EXIT
check_set_fallocate_or_skip
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
# enable ost quota
set_ost_qtype $QTYPE || error "enable ost quota failed"
wait_delete_completed || error "wait_delete_completed failed"
sync_all_data || true
used=$(getquota -u $TSTUSR global curspace)
- [ $used -ne 0 ] && quota_error u $TSTUSR \
+ [ $used -eq 0 ] || quota_error u $TSTUSR \
"user quota isn't released after deletion"
- resetquota -u $TSTUSR
}
run_test 1h "Block hard limit test using fallocate"
+test_1i() {
+ local global_limit=200 # 200M
+ local limit1=10 # 10M
+ local TESTDIR="$DIR/$tdir/"
+ local testfile="$TESTDIR/$tfile-0"
+ local testfile1="$TESTDIR/$tfile-1"
+ local testfile2="$TESTDIR/$tfile-2"
+ local qpool1="qpool1"
+
+ mds_supports_qp
+ setup_quota_test || error "setup quota failed with $?"
+ stack_trap cleanup_quota_test EXIT
+
+ # enable ost quota
+ set_ost_qtype $QTYPE || error "enable ost quota failed"
+
+ log "User quota (block hardlimit:$global_limit MB)"
+ $LFS setquota -u $TSTUSR -b 0 -B ${global_limit}M -i 0 -I 0 $DIR ||
+ error "set user quota failed"
+
+ pool_add $qpool1 || error "pool_add failed"
+ pool_add_targets $qpool1 0 0 ||
+ error "pool_add_targets failed"
+
+ $LFS setquota -u $TSTUSR -B ${limit1}M --pool $qpool1 $DIR ||
+ error "set user quota failed"
+
+ # make sure the system is clean
+ local used=$(getquota -u $TSTUSR global curspace)
+ [ $used -ne 0 ] && error "Used space($used) for user $TSTUSR isn't 0."
+
+ $LFS setstripe $TESTDIR -c 1 -i 0 || error "setstripe $TESTDIR failed"
+
+ # hit pool limit
+ test_1_check_write $testfile "user" $limit1
+ $LFS setquota -u $TSTUSR -B 0 --pool $qpool1 $DIR ||
+ error "set user quota failed"
+
+ $LFS quota -uv $TSTUSR --pool $qpool1 $DIR
+ $RUNAS $DD of=$testfile1 count=$((limit1/2)) ||
+ quota_error u $TSTUSR "write failure, but expect success"
+
+ rm -f $testfile
+ rm -f $testfile1
+ wait_delete_completed || error "wait_delete_completed failed"
+ sync_all_data || true
+
+ $LFS setquota -u $TSTUSR -B ${limit1}M --pool $qpool1 $DIR ||
+ error "set user quota failed"
+ test_1_check_write $testfile "user" $limit1
+ local tmp_limit=$(($limit1*2))
+ # increase pool limit
+ $LFS setquota -u $TSTUSR -B ${tmp_limit}M --pool $qpool1 $DIR ||
+ error "set user quota failed"
+ # now write shouldn't fail
+ $RUNAS $DD of=$testfile1 count=$((limit1/3)) ||
+ quota_error u $TSTUSR "write failure, but expect success"
+ # decrease pool limit
+ $LFS setquota -u $TSTUSR -B ${limit1}M --pool $qpool1 $DIR ||
+ error "set user quota failed"
+ $RUNAS $DD of=$testfile2 count=$((limit1/3))
+ # flush cache, ensure noquota flag is set on client
+ cancel_lru_locks osc
+ sync; sync_all_data || true
+ $RUNAS $DD of=$testfile2 seek=$((limit1/3)) count=1 &&
+ quota_error u $TSTUSR "write success, but expect failure"
+ return 0
+}
+run_test 1i "Quota pools: different limit and usage relations"
+
# test inode hardlimit
test_2() {
- local TESTFILE="$DIR/$tdir/$tfile-0"
- local LIMIT=$(do_facet mds1 $LCTL get_param -n \
+ local testfile="$DIR/$tdir/$tfile-0"
+ local least_qunit=$(do_facet mds1 $LCTL get_param -n \
qmt.$FSNAME-QMT0000.md-0x0.info |
- awk '/least qunit/{ print $3 }')
- local L2=$(do_facet mds1 $LCTL get_param -n \
- qmt.$FSNAME-QMT0000.md-0x0.soft_least_qunit)
-
- [ $L2 -le $LIMIT ] || LIMIT=$L2
+ sed -e 's/least qunit/least_qunit/' |
+ awk '/least_qunit/{ print $2 }')
+ local limit
- [ "$SLOW" = "no" ] || LIMIT=$((LIMIT * 1024))
+ [ "$SLOW" = "no" ] && limit=$((least_qunit * 2)) ||
+ limit=$((least_qunit * 1024))
+ echo "least_qunit: '$least_qunit', limit: '$limit'"
- local FREE_INODES=$(mdt_free_inodes 0)
- echo "$FREE_INODES free inodes on master MDT"
- [ $FREE_INODES -lt $LIMIT ] &&
- skip "not enough free inodes $FREE_INODES required $LIMIT"
+ local free_inodes=$(mdt_free_inodes 0)
+ echo "$free_inodes free inodes on master MDT"
+ [ $free_inodes -lt $limit ] &&
+ skip "not enough free inodes $free_inodes required $limit"
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
# enable mdt quota
set_mdt_qtype $QTYPE || error "enable mdt quota failed"
# test for user
- log "User quota (inode hardlimit:$LIMIT files)"
- $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I $LIMIT $DIR ||
+ log "User quota (inode hardlimit:$limit files)"
+ $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I $limit $DIR ||
error "set user quota failed"
# make sure the system is clean
- local USED=$(getquota -u $TSTUSR global curinodes)
- [ $USED -ne 0 ] && error "Used inodes($USED) for user $TSTUSR isn't 0."
+ local used=$(getquota -u $TSTUSR global curinodes)
+ [ $used -ne 0 ] && error "Used inodes($used) for user $TSTUSR isn't 0."
- log "Create $LIMIT files ..."
- $RUNAS createmany -m ${TESTFILE} $LIMIT ||
+ log "Create $((limit - least_qunit)) files ..."
+ $RUNAS createmany -m ${testfile} $((limit - least_qunit)) ||
quota_error u $TSTUSR "user create failure, but expect success"
+ # it is ok, if it fails on the last qunit
+ $RUNAS createmany -m ${testfile}_yyy $least_qunit || true
log "Create out of file quota ..."
- $RUNAS touch ${TESTFILE}_xxx &&
+ $RUNAS touch ${testfile}_xxx &&
quota_error u $TSTUSR "user create success, but expect EDQUOT"
# cleanup
- unlinkmany ${TESTFILE} $LIMIT || error "unlinkmany $TESTFILE failed"
- rm -f ${TESTFILE}_xxx
+ unlinkmany ${testfile} $((limit - least_qunit)) ||
+ error "unlinkmany $testfile failed"
+ # if 2nd createmany got EDQUOT, not all of nodes would be created
+ unlinkmany ${testfile}_yyy $least_qunit || true
+ rm -f ${testfile}_xxx
wait_delete_completed
- USED=$(getquota -u $TSTUSR global curinodes)
- [ $USED -ne 0 ] && quota_error u $TSTUSR \
+ used=$(getquota -u $TSTUSR global curinodes)
+ [ $used -ne 0 ] && quota_error u $TSTUSR \
"user quota isn't released after deletion"
resetquota -u $TSTUSR
# test for group
log "--------------------------------------"
- log "Group quota (inode hardlimit:$LIMIT files)"
- $LFS setquota -g $TSTUSR -b 0 -B 0 -i 0 -I $LIMIT $DIR ||
+ log "Group quota (inode hardlimit:$limit files)"
+ $LFS setquota -g $TSTUSR -b 0 -B 0 -i 0 -I $limit $DIR ||
error "set group quota failed"
- TESTFILE=$DIR/$tdir/$tfile-1
+ testfile=$DIR/$tdir/$tfile-1
# make sure the system is clean
- USED=$(getquota -g $TSTUSR global curinodes)
- [ $USED -ne 0 ] && error "Used inodes($USED) for group $TSTUSR isn't 0."
+ used=$(getquota -g $TSTUSR global curinodes)
+ [ $used -ne 0 ] && error "Used inodes($used) for group $TSTUSR isn't 0."
- log "Create $LIMIT files ..."
- $RUNAS createmany -m ${TESTFILE} $LIMIT ||
+ log "Create $limit files ..."
+ $RUNAS createmany -m ${testfile} $((limit - least_qunit)) ||
quota_error g $TSTUSR "group create failure, but expect success"
+ $RUNAS createmany -m ${testfile}_yyy $least_qunit ||
log "Create out of file quota ..."
- $RUNAS touch ${TESTFILE}_xxx &&
+ $RUNAS touch ${testfile}_xxx &&
quota_error g $TSTUSR "group create success, but expect EDQUOT"
# cleanup
- unlinkmany ${TESTFILE} $LIMIT || error "unlinkmany $TESTFILE failed"
- rm -f ${TESTFILE}_xxx
+ unlinkmany ${testfile} $((limit - least_qunit)) ||
+ error "unlinkmany $testfile failed"
+ unlinkmany ${testfile}_yyy $least_qunit || true
+ rm -f ${testfile}_xxx
wait_delete_completed
- USED=$(getquota -g $TSTUSR global curinodes)
- [ $USED -ne 0 ] && quota_error g $TSTUSR \
+ used=$(getquota -g $TSTUSR global curinodes)
+ [ $used -ne 0 ] && quota_error g $TSTUSR \
"user quota isn't released after deletion"
resetquota -g $TSTUSR
- ! is_project_quota_supported && cleanup_quota_test &&
+ ! is_project_quota_supported &&
echo "Skip project quota is not supported" && return 0
# test for project
log "--------------------------------------"
- log "Project quota (inode hardlimit:$LIMIT files)"
- $LFS setquota -p $TSTPRJID -b 0 -B 0 -i 0 -I $LIMIT $DIR ||
+ log "Project quota (inode hardlimit:$limit files)"
+ $LFS setquota -p $TSTPRJID -b 0 -B 0 -i 0 -I $limit $DIR ||
error "set project quota failed"
- TESTFILE=$DIR/$tdir/$tfile-1
+ testfile=$DIR/$tdir/$tfile-1
# make sure the system is clean
- USED=$(getquota -p $TSTPRJID global curinodes)
- [ $USED -ne 0 ] &&
- error "Used inodes($USED) for project $TSTPRJID isn't 0"
+ used=$(getquota -p $TSTPRJID global curinodes)
+ [ $used -ne 0 ] &&
+ error "Used inodes($used) for project $TSTPRJID isn't 0"
change_project -sp $TSTPRJID $DIR/$tdir
- log "Create $LIMIT files ..."
- $RUNAS createmany -m ${TESTFILE} $((LIMIT-1)) || quota_error p \
- $TSTPRJID "project create fail, but expect success"
+ log "Create $limit files ..."
+ $RUNAS createmany -m ${testfile} $((limit-least_qunit)) ||
+ quota_error p $TSTPRJID \
+ "project create fail, but expect success"
+ $RUNAS createmany -m ${testfile}_yyy $least_qunit || true
log "Create out of file quota ..."
- $RUNAS touch ${TESTFILE}_xxx && quota_error p $TSTPRJID \
+ $RUNAS touch ${testfile}_xxx && quota_error p $TSTPRJID \
"project create success, but expect EDQUOT"
change_project -C $DIR/$tdir
cleanup_quota_test
- USED=$(getquota -p $TSTPRJID global curinodes)
- [ $USED -eq 0 ] || quota_error p $TSTPRJID \
+ used=$(getquota -p $TSTPRJID global curinodes)
+ [ $used -eq 0 ] || quota_error p $TSTPRJID \
"project quota isn't released after deletion"
}
qmt.$FSNAME-QMT0000.dt-0x0.soft_least_qunit)
setup_quota_test
- stack_trap cleanup_quota_test EXIT
$LFS setstripe $testfile -c 1 -i 0
chown $TSTUSR.$TSTUSR $testfile
error "set user quota failed"
$LFS setquota -u $TSTUSR -b ${limit}M -B 0 --pool $qpool $DIR ||
error "set user quota failed"
- # qpool has minimum soft limit, but it's grace is grater than
- # grace period of qpool2. Thus write shouldn't fail when
+ # qpool has minimum soft limit, but its grace is greater than
+ # the grace period of qpool2. Thus write shouldn't fail when
# hit qpool soft limit - only when reaches up qpool2 limit
# after grace2 seconds.
$LFS setquota -u $TSTUSR -b ${limit2}M -B 0 --pool $qpool2 $DIR ||
local SOFT_LIMIT=$(do_facet $SINGLEMDS $LCTL get_param -n \
qmt.$FSNAME-QMT0000.md-0x0.soft_least_qunit)
- setup_quota_test 0
- trap cleanup_quota_test EXIT
+ setup_quota_test
is_project_quota_supported && change_project -sp $TSTPRJID $DIR/$tdir
echo "Create files to exceed soft limit"
local ILIMIT=10 # inodes
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
set_mdt_qtype $QTYPE || error "enable mdt quota failed"
set_ost_qtype $QTYPE || error "enable ost quota failed"
# cleanup
unlinkmany $DIR/$tdir/$tfile-0_ $((ILIMIT + 1)) ||
error "unlinkmany $DIR/$tdir/$tfile-0_ failed"
- cleanup_quota_test
}
run_test 5 "Chown & chgrp successfully even out of block/file quota"
do_facet ost1 dmesg -c > /dev/null
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
# make sure the system is clean
local USED=$(getquota -u $TSTUSR global curspace)
fi
sleep 1
done
-
- cleanup_quota_test
}
run_test 6 "Test dropping acquire request on master"
[ "$SLOW" = "no" ] && LIMIT=5
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
# make sure the system is clean
local USED=$(getquota -u $TSTUSR global curspace)
# hardlimit should be cleared on slave during reintegration
$RUNAS $DD of=$TESTFILE count=$((LIMIT + 1)) oflag=sync ||
quota_error u $TSTUSR "write error, but expect success"
-
- cleanup_quota_test
}
run_test 7a "Quota reintegration (global index)"
local TESTFILE=$DIR/$tdir/$tfile
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
# make sure the system is clean
local USED=$(getquota -u $TSTUSR global curspace)
[ "$SLOW" = "no" ] && LIMIT=5
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
# make sure the system is clean
local USED=$(getquota -u $TSTUSR global curspace)
# reintegration, write will exceed quota
$RUNAS $DD of=$TESTFILE count=$((LIMIT + 1)) oflag=sync &&
quota_error u $TSTUSR "write success, but expect EDQUOT"
-
- cleanup_quota_test
+ return 0
}
run_test 7c "Quota reintegration (restart mds during reintegration)"
local limit=20 # MB
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
set_ost_qtype "none" || error "disable ost quota failed"
$LFS setquota -u $TSTUSR -B ${limit}M $DIR ||
$RUNAS2 $DD of=$TESTFILE1 count=$((limit + 1)) oflag=sync &&
quota_error u $TSTUSR2 "$TSTUSR2 write success, expect EDQUOT"
-
- cleanup_quota_test
+ return 0
}
run_test 7d "Quota reintegration (Transfer index in multiple bulks)"
local TESTFILE=$DIR/${tdir}-1/$tfile
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
# make sure the system is clean
local USED=$(getquota -u $TSTUSR global curinodes)
$RUNAS unlinkmany $TESTFILE $((ilimit + 1)) || error "unlink failed"
rmdir $DIR/${tdir}-1 || error "unlink remote dir failed"
-
- cleanup_quota_test
}
run_test 7e "Quota reintegration (inode limits)"
local FILE_LIMIT=1000000
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
set_mdt_qtype $QTYPE || error "enable mdt quota failed"
set_ost_qtype $QTYPE || error "enable ost quota failed"
quota_error a $TSTUSR "dbench failed!"
is_project_quota_supported && change_project -C $DIR/$tdir
- cleanup_quota_test
}
run_test 8 "Run dbench with quota enabled"
check_whether_skip && return 0
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
set_ost_qtype "ug" || error "enable ost quota failed"
local TESTFILE=$DIR/$tdir/$tfile
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
# set limit to root user should fail
$LFS setquota -u root -b 100G -B 500G -i 1K -I 1M $DIR &&
runas -u 0 -g 0 $DD of=$TESTFILE count=3 oflag=sync ||
error "write failure, expect success"
-
- cleanup_quota_test
}
run_test 10 "Test quota for root user"
test_11() {
local TESTFILE=$DIR/$tdir/$tfile
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
set_mdt_qtype "ug" || error "enable mdt quota failed"
$LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I 1 $DIR ||
$SHOW_QUOTA_USER
local USED=$(getquota -u $TSTUSR global curinodes)
[ $USED -ge 2 ] || error "Used inodes($USED) is less than 2"
-
- cleanup_quota_test
}
run_test 11 "Chown/chgrp ignores quota"
local TESTFILE1="$DIR/$tdir/$tfile"-1
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
set_ost_qtype "u" || error "enable ost quota failed"
quota_show_check b u $TSTUSR
echo "Write to ost1 after space freed from ost0..."
$RUNAS $DD of=$TESTFILE1 count=$blk_cnt oflag=sync ||
quota_error a $TSTUSR "rebalancing failed"
-
- cleanup_quota_test
}
run_test 12a "Block quota rebalancing"
local TESTFILE1=$DIR/${tdir}-1/$tfile
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
$LFS mkdir -i 1 $DIR/${tdir}-1 || error "create remote dir failed"
chmod 0777 $DIR/${tdir}-1
$RUNAS unlinkmany $TESTFILE1 $((ilimit / 2)) ||
error "unlink mdt1 files failed"
rmdir $DIR/${tdir}-1 || error "unlink remote dir failed"
-
- cleanup_quota_test
}
run_test 12b "Inode quota rebalancing"
local procf="ldlm.namespaces.*MDT0000-lwp-OST0000.lru_size"
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
set_ost_qtype "u" || error "enable ost quota failed"
quota_show_check b u $TSTUSR
local space=$(getquota -u $TSTUSR $OSTUUID curspace)
[ $limit -le $space ] ||
error "spare quota isn't released, limit:$limit, space:$space"
-
- cleanup_quota_test
}
run_test 13 "Cancel per-ID lock in the LRU list"
local TESTFILE=$DIR/$tdir/$tfile
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
# make sure the system is clean
local USED=$(getquota -u $TSTUSR global curspace)
local TESTFILE="$DIR/$tdir/$tfile"
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
set_ost_qtype "u" || error "enable ost quota failed"
log "User quota (limit: $blimit)"
local TESTFILE=$DIR/$tdir/$tfile
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
set_ost_qtype $QTYPE || error "enable ost quota failed"
$RUNAS $DD of=$TESTFILE count=$((blimit + 1)) seek=$((blimit + 1)) &&
quota_error u $TSTUSR "Write success, expect failure"
$SHOW_QUOTA_USER
-
- cleanup_quota_test
}
run_test 19 "Updating admin limits doesn't zero operational limits(b14790)"
local ILIMIT=1000000
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
set_ost_qtype $QTYPE || error "Enable ost quota failed"
sleep 1
done
echo "(dd_pid=$DDPID2, time=$count)successful"
-
- cleanup_quota_test
}
run_test 21 "Setquota while writing & deleting (b16053)"
local LIMIT=$1
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
set_ost_qtype $QTYPE || error "Enable ost quota failed"
local TESTFILE="$DIR/$tdir/$tfile"
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
set_ost_qtype $QTYPE || error "enable ost quota failed"
sync_all_data || true
$SHOW_QUOTA_USER | grep '*' || error "no matching *"
-
- cleanup_quota_test
}
run_test 24 "lfs draws an asterix when limit is reached (b16646)"
local GRACE=10
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
set_ost_qtype "u" || error "enable ost quota failed"
$SHOW_QUOTA_USER
$RUNAS $DD of=$TESTFILE conv=notrunc oflag=append count=4 &&
error "grace times were reset"
- # cleanup
- cleanup_quota_test
$LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace \
$MAX_IQ_TIME $DIR || error "restore grace time failed"
}
local TOTAL_BLKS=$((INODES * BLK_CNT * 1024))
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
# make sure the system is clean
local USED=$(getquota -u $TSTID global curspace)
is_project_quota_supported && project_supported="yes"
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
# make sure the system is clean
local USED=$(getquota -u $TSTID global curspace)
[ $USED -lt $BLK_CNT ] && error \
"Used space for group $TSTPRJID is $USED, expected $BLK_CNT"
fi
-
- cleanup_quota_test
+ return 0
}
run_test 34 "Usage transfer for user & group & project"
local BLK_CNT=2 # MB
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
echo "Write file..."
$RUNAS $DD of=$DIR/$tdir/$tfile count=$BLK_CNT 2>/dev/null ||
error "Used space for project $TSTPRJID isn't " \
"increased orig:$ORIG_PRJ_SPACE, now:$USED"
fi
-
- cleanup_quota_test
}
run_test 35 "Usage is still accessible across reboot"
skip "Old server doesn't have LU-5006 fix."
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
# make sure the system is clean
local USED=$(getquota -u $TSTID global curspace)
USED=$(getquota -u $TSTID global curspace)
[ $USED -ne 0 ] || quota_error u $TSTUSR "Used space is 0"
-
- cleanup_quota_test
}
run_test 37 "Quota accounted properly for file created by 'lfs setstripe'"
[ "$UID" != 0 ] && skip_env "must run as root" && return
- setup_quota_test 0 || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
+ setup_quota_test || error "setup quota failed with $?"
# make sure the system is clean
local USED=$(getquota -u $TSTID global curspace)
local procf="osd-$mds1_FSTYPE.$FSNAME-MDT0000"
procf=${procf}.quota_slave.acct_user
- local accnt_cnt
+ local acct_cnt
acct_cnt=$(do_facet mds1 $LCTL get_param $procf | grep "id:" | \
awk '{if ($3 < 10000) {print $3}}' | wc -l)
do_facet mds1 $LCTL get_param $procf
error "skipped id entries"
}
-
- cleanup_quota_test
}
run_test 38 "Quota accounting iterator doesn't skip id entries"
mount
setupall
projectid=$(lfs project $TESTFILE | awk '{print $1}')
- [ $projectid -ne 1024 ] &&
+ [ $projectid -eq 1024 ] ||
error "Project id should be 1024 not $projectid"
-
- cleanup_quota_test
}
run_test 39 "Project ID interface works correctly"
ln $dir1/1 $dir2/1_link &&
error "Hard link across different project quota should fail"
- rm -rf $dir1 $dir2
-
- cleanup_quota_test
+ return 0
}
run_test 40a "Hard link across different project ID"
mv $dir1/1 $dir2/2 || error "mv failed $?"
local projid=$(lfs project $dir2/2 | awk '{print $1}')
- if [ "$projid" != "2" ]; then
- error "project id expected 2 not $projid"
- fi
- rm -rf $dir1 $dir2
- cleanup_quota_test
+ [ "$projid" -eq 2 ] || error "project id expected 2 not $projid"
}
run_test 40b "Mv across different project ID"
error "file under remote dir expected 1 not $projid"
#Agent inode should be ignored for project quota
- USED=$(getquota -p 1 global curinodes)
- [ "$USED" != "3" ] &&
- error "file count expected 3 got $USED"
-
- rm -rf $dir
- cleanup_quota_test
- return 0
+ local used=$(getquota -p 1 global curinodes)
+ [ $used -eq 3 ] ||
+ error "file count expected 3 got $used"
}
run_test 40c "Remote child Dir inherit project quota properly"
done
# account should be 1 + (2 + 1) *10 + 1 * 5
- USED=$(getquota -p $TSTPRJID global curinodes)
- [ "$USED" == "36" ] ||
- error "file count expected 36 got $USED"
-
- rm -rf $dir
- cleanup_quota_test
+ local used=$(getquota -p $TSTPRJID global curinodes)
+ [ $used -eq 36 ] ||
+ error "file count expected 36 got $used"
}
run_test 40d "Stripe Directory inherit project quota properly"
is_project_quota_supported ||
skip "Project quota is not supported"
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
local dir="$DIR/$tdir/dir"
local blimit=102400
local ilimit=4096
awk '/$FSNAME/ { printf \\\"%d %d \\\", \\\$2,\\\$3 }'" \
"$expected" ||
error "failed to get correct statfs for project quota"
+}
+run_test 41 "df should return projid-specific values"
+
+test_delete_qid()
+{
+ local qslv_file=$1
+ local qtype_file=$2
+ local qtype=$3
+ local qid=$4
+ local osd="osd-ldiskfs"
+
+ [ "$ost1_FSTYPE" = zfs ] && osd="osd-zfs"
+
+ rm -f $DIR/$tdir/$tfile
+ $LFS setstripe -i 0 -c 1 $DIR/$tdir/$tfile
+ chmod a+rw $DIR/$tdir/$tfile
+
+ $LFS setquota $qtype $qid -B 300M $MOUNT
+ $RUNAS dd if=/dev/zero of=$DIR/$tdir/$tfile bs=1M count=1 ||
+ error "failed to dd"
+
+ do_facet $SINGLEMDS \
+ "cat /proc/fs/lustre/qmt/$FSNAME-QMT0000/dt-0x0/$qtype_file |
+ grep -E 'id: *$qid'" || error "QMT: no qid $qid is found"
+ echo $osd
+ do_facet ost1 \
+ "cat /proc/fs/lustre/$osd/$FSNAME-OST0000/$qslv_file |
+ grep -E 'id: *$qid'" || error "QSD: no qid $qid is found"
+
+ $LFS setquota $qtype $qid --delete $MOUNT
+ do_facet $SINGLEMDS \
+ "cat /proc/fs/lustre/qmt/$FSNAME-QMT0000/dt-0x0/$qtype_file |
+ grep -E 'id: *$qid'" && error "QMT: qid $qid is not deleted"
+ sleep 5
+ do_facet ost1 \
+ "cat /proc/fs/lustre/$osd/$FSNAME-OST0000/$qslv_file |
+ grep -E 'id: *$qid'" && error "QSD: qid $qid is not deleted"
+
+ $LFS setquota $qtype $qid -B 500M $MOUNT
+ $RUNAS dd if=/dev/zero of=$DIR/$tdir/$tfile bs=1M count=1 ||
+ error "failed to dd"
+ do_facet $SINGLEMDS \
+ "cat /proc/fs/lustre/qmt/$FSNAME-QMT0000/dt-0x0/$qtype_file |
+ grep -E 'id: *$qid'" || error "QMT: qid $pid is not recreated"
+ cat /proc/fs/lustre/$osd/$FSNAME-OST0000/$qslv_file
+ do_facet ost1 \
+ "cat /proc/fs/lustre/$osd/$FSNAME-OST0000/$qslv_file |
+ grep -E 'id: *$qid'" || error "QSD: qid $qid is not recreated"
+}
+
+test_48()
+{
+ setup_quota_test || error "setup quota failed with $?"
+ set_ost_qtype $QTYPE || error "enable ost quota failed"
+ quota_init
+
+ test_delete_qid "quota_slave/limit_user" "glb-usr" "-u" $TSTID
+ test_delete_qid "quota_slave/limit_group" "glb-grp" "-g" $TSTID
+ is_project_quota_supported &&
+ test_delete_qid "quota_slave/limit_project" "glb-prj" "-p" "10000"
cleanup_quota_test
}
-run_test 41 "df should return projid-specific values"
+run_test 48 "lfs quota --delete should delete quota project ID"
test_50() {
! is_project_quota_supported &&
# 1(projid 0 dir) + 1(projid 2 dir) + 20(projid 2 files)
count=$($LFS find ! --projid 1 $DIR/$tdir | wc -l)
- [ "$count" != 22 ] && error "expected 22 but got $count"
-
- rm -rf $dir1 $dir2
- cleanup_quota_test
+ [ $count -eq 22 ] || error "expected 22 but got $count"
}
run_test 50 "Test if lfs find --projid works"
#try mv to dir
mv $DIR/$tdir/6 $dir/7
used=$(getquota -p 1 global curinodes)
- [ $used != "6" ] && error "expected 6 got $used"
-
- rm -rf $dir
- cleanup_quota_test
+ [ $used -eq 6 ] || error "expected 6 got $used"
}
run_test 51 "Test project accounting with mv/cp"
test_52() {
! is_project_quota_supported &&
skip "Project quota is not supported"
+
+ (( MDS1_VERSION >= $(version_code 2.14.55) )) ||
+ skip "Need MDS version at least 2.14.55"
+
setup_quota_test || error "setup quota failed with $?"
- local dir="$DIR/$tdir/dir"
- mkdir $dir && change_project -sp 1 $dir
- touch $DIR/$tdir/file
- #Try renaming a file into the project. This should fail.
- for num in $(seq 1 2000); do
- mrename $DIR/$tdir/file $dir/file >&/dev/null &&
- error "rename should fail"
- done
- rm -rf $dir
- cleanup_quota_test
+ local dir1=$DIR/$tdir/t52_dir1
+ local dir2=$DIR/$tdir/t52_dir2
+
+ mkdir $dir1 || error "failed to mkdir $dir1"
+ mkdir $dir2 || error "failed to mkdir $dir2"
+
+ $LFS project -sp 1000 $dir1 || error "fail to set project on $dir1"
+ $LFS project -sp 1001 $dir2 || error "fail to set project on $dir2"
+
+ $DD if=/dev/zero of=/$dir1/$tfile bs=1M count=100 ||
+ error "failed to create and write $tdir1/$tfile"
+
+ cancel_lru_locks osc
+ sync; sync_all_data || true
+
+ local attrs=($(lsattr -p $dir1/$tfile))
+ (( ${attrs[0]} == 1000 )) ||
+ error "project ID on $dir1/$tfile is not inherited"
+
+ $LFS quota -p 1000 $DIR
+ $LFS quota -p 1001 $DIR
+
+ local prev_used=$(getquota -p 1000 global curspace)
+ local prev_used2=$(getquota -p 1001 global curspace)
+
+ mrename $dir1 $dir2/tdir || log "rename directory return $?"
+
+ local inum_before=$(ls -i $dir1/$tfile | awk '{print $1}')
+ mrename $dir1/$tfile $dir2/$tfile || error "failed to rename file"
+ local inum_after=$(ls -i $dir2/$tfile | awk '{print $1}')
+
+ attrs=($(lsattr -p $dir2/$tfile))
+ (( ${attrs[0]} == 1001 )) ||
+ error "project ID is not updated after rename"
+
+ (( $inum_before == $inum_after )) ||
+ error "inode is changed after rename: $inum_before, $inum_after"
+
+ sync_all_data || true
+
+ $LFS quota -p 1000 $DIR
+ $LFS quota -p 1001 $DIR
+
+ local new_used=$(getquota -p 1000 global curspace)
+ local new_used2=$(getquota -p 1001 global curspace)
+
+ (( $prev_used >= $new_used + 102400 )) ||
+ error "quota is not deducted from old project ID"
+ (( $prev_used2 <= $new_used2 - 102400 )) ||
+ error "quota is not added for the new project ID"
}
-run_test 52 "Rename across different project ID"
+run_test 52 "Rename normal file across project ID"
test_53() {
! is_project_quota_supported &&
setup_quota_test || error "setup quota failed with $?"
local dir="$DIR/$tdir/dir"
mkdir $dir && change_project -s $dir
- lfs project -d $dir | grep P || error "inherit attribute should be set"
+ [[ $($LFS project -d $dir) =~ " P " ]] ||
+ error "inherit attribute should be set"
change_project -C $dir
- lfs project -d $dir | grep P &&
+ [[ $($LFS project -d $dir) =~ " - " ]] ||
error "inherit attribute should be cleared"
-
- rm -rf $dir
- cleanup_quota_test
}
run_test 53 "Project inherit attribute could be cleared"
! is_project_quota_supported &&
skip "Project quota is not supported"
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
local testfile="$DIR/$tdir/$tfile-0"
#set project ID/inherit attribute
#cleanup
unlinkmany ${testfile} 100 ||
error "unlink many files failed"
-
- cleanup_quota_test
}
run_test 54 "basic lfs project interface test"
error "chgrp should succeed"
$LFS quota -v -g $TSTUSR2 $DIR
-
- cleanup_quota_test
}
run_test 55 "Chgrp should be affected by group quota"
$LFS quota -t -u $DIR
error "expected grace time: 10s;10s, got:$grace_time"
fi
-
- cleanup_quota_test
}
run_test 56 "lfs quota -t should work well"
ln -s $dir/not_exist_file $dir/ccc
local cnt=$(lfs project -r $dir 2>/dev/null | wc -l)
[ $cnt -eq 7 ] || error "expected 7 got $cnt"
-
- cleanup_quota_test
}
run_test 57 "lfs project could tolerate errors"
touch $testfile && lfs project -sp 1 $testfile
enable_project_quota
- cleanup_quota_test
}
run_test 59 "lfs project dosen't crash kernel with project disabled"
[ $MDS1_VERSION -lt $(version_code 2.11.53) ] &&
skip "Needs MDS version 2.11.53 or later."
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
local testfile=$DIR/$tdir/$tfile
local limit=100
# root user can overrun quota
runas -u 0 -g 0 touch $DIR/$tdir/foo ||
error "root user should succeed"
-
- cleanup_quota_test
}
run_test 60 "Test quota for root with setgid"
}
setup_quota_test || error "setup quota failed with $?"
- stack_trap cleanup_quota_test EXIT
quota_init
error "reset default quota failed"
$LFS setquota $qtype $qid $qpool_cmd $qs 0 $qh 0 $DIR ||
error "reset quota failed"
-
cleanup_quota_test
}
test_62() {
! is_project_quota_supported &&
skip "Project quota is not supported"
- [[ "$(chattr -h 2>&1)" =~ "project" ]] ||
+ [[ "$(chattr -h 2>&1)" =~ "project" ||
+ "$(chattr -h 2>&1)" =~ "pRVf" ]] ||
skip "chattr did not support project quota"
setup_quota_test || error "setup quota failed with $?"
local testdir=$DIR/$tdir/
chattr -P $testdir || error "root failed to clear inherit"
[[ $($LFS project -d $testdir) =~ "P" ]] &&
error "inherit attribute should be cleared"
- cleanup_quota_test
+ return 0
}
run_test 62 "Project inherit should be only changed by root"
[ $qtype == "p" ] && qid=$TSTPRJID
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
quota_init
$RUNAS $DD of=$DIR/$tdir/file count=$((LIMIT/2048 + 10)) oflag=sync &&
quota_error $qtype $qid "write succeed, expect EDQUOT"
- rm -f $DIR/$tdir/*
+ rm -fr $DIR/$tdir
rm -fr $DIR/$tdir_dom
$LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I 0 $DIR ||
error "reset usr quota failed"
-
- cleanup_quota_test
}
test_63() {
used=$(getquota -p $TSTPRJID global curinodes)
[ $used -eq 0 ] || error "expected 0 got $used"
-
- cleanup_quota_test
}
run_test 64 "lfs project on non dir/files should succeed"
local quota_g=$($LFS quota -g $TSTUSR $DIR)
local quota_all=$($RUNAS $LFS quota $DIR)
- [ "$(echo "$quota_all" | head -n3)" != "$quota_u" ] &&
+ [ "$(echo "$quota_all" | head -n3)" == "$quota_u" ] ||
error "usr quota not match"
- [ "$(echo "$quota_all" | tail -n3)" != "$quota_g" ] &&
+ [ "$(echo "$quota_all" | tail -n3)" == "$quota_g" ] ||
error "grp quota not match"
-
- rm -f $TESTFILE
- # cleanup
- cleanup_quota_test
}
run_test 65 "Check lfs quota result"
[ "$MDS1_VERSION" -lt $(version_code 2.12.4) ] &&
skip "Not supported before 2.12.4"
setup_quota_test || error "setup quota failed with $?"
- stack_trap cleanup_quota_test EXIT
local old=$(do_facet mds1 $LCTL get_param -n \
mdt.*.enable_chprojid_gid | head -1)
local testdir=$DIR/$tdir/foo
do_facet mds1 $LCTL set_param mdt.*.enable_chprojid_gid=0
- stack_trap "do_facet mds1 $LCTL set_param mdt.*.enable_chprojid_gid=0" \
- EXIT
+ stack_trap "do_facet mds1 $LCTL \
+ set_param mdt.*.enable_chprojid_gid=$old" EXIT
- test_mkdir -i 0 -c 1 $testdir || error "failed to mkdir"
+ mkdir_on_mdt0 $testdir || error "failed to mkdir"
chown -R $TSTID:$TSTID $testdir
change_project -sp $TSTPRJID $testdir
$RUNAS mkdir $testdir/foo || error "failed to mkdir foo"
change_project -p $TSTPRJID $testdir/bar || error \
"root should be able to change its own file's projid"
-
- cleanup_quota_test
}
run_test 66 "nonroot user can not change project state in default"
skip "ZFS grants some block space together with inode"
setup_quota_test || error "setup quota failed with $?"
- trap cleanup_quota_test EXIT
# enable ost quota
set_ost_qtype $QTYPE || error "enable ost quota failed"
wait_delete_completed || error "wait_delete_completed failed"
sync_all_data || true
used=$(getquota -u $TSTUSR global curspace)
- [ $used -ne 0 ] && quota_error u $TSTUSR \
+ [ $used -eq 0 ] || quota_error u $TSTUSR \
"user quota isn't released after deletion"
- resetquota -u $TSTUSR
-
- cleanup_quota_test
}
run_test 67 "quota pools recalculation"
local qtype=$2
local nr
+ wait_update_facet mds1 \
+ "$LCTL get_param -n qmt.$FSNAME-QMT0000.dt-$pool.info \
+ >/dev/null 2>&1 || echo foo" "" ||
+ error "mds1: failed to create quota pool $pool"
+
do_facet mds1 $LCTL get_param -n qmt.$FSNAME-QMT0000.dt-$pool.info |
awk '/usr/ {getline; print $2}'
}
mds_supports_qp
setup_quota_test || error "setup quota failed with $?"
- stack_trap cleanup_quota_test EXIT
# enable ost quota
set_ost_qtype $QTYPE || error "enable ost quota failed"
# Check again that all is fine with global pool
nr=$(get_slave_nr "0x0" "usr")
- [[ $nr != $((OSTCOUNT + MDSCOUNT)) ]] &&
+ [[ $nr == $((OSTCOUNT + MDSCOUNT)) ]] ||
error "Slave_nr $nr for global pool != ($OSTCOUNT + $MDSCOUNT)"
-
- cleanup_quota_test
}
run_test 68 "slave number in quota pool changed after each add/remove OST"
mds_supports_qp
setup_quota_test || error "setup quota failed with $?"
- stack_trap cleanup_quota_test EXIT
# enable ost quota
set_ost_qtype $QTYPE || error "enable ost quota failed"
$RUNAS dd if=/dev/zero of="$dom0/f1" bs=1K count=512 seek=512 \
oflag=sync || quota_error u $TSTUSR "write failed"
-
- cleanup_quota_test
}
run_test 69 "EDQUOT at one of pools shouldn't affect DOM"
-test_70()
+test_70a()
{
local qpool="qpool1"
local limit=20 # MB
skip "Needs a client >= $VERSION_WITH_QP"
setup_quota_test || error "setup quota failed with $?"
- stack_trap cleanup_quota_test EXIT
# MDS returns EFAULT for unsupported quotactl command
[[ $MDS1_VERSION -lt $(version_code $VERSION_WITH_QP) ]] && err=14
$LFS quota -u $TSTUSR --pool $qpool $DIR
rc=$?
[ $rc -eq $err ] || error "quota res $rc != $err"
+}
+run_test 70a "check lfs setquota/quota with a pool option"
- cleanup_quota_test
+test_70b()
+{
+ local glbl_hard=200 # 200M
+ local glbl_soft=100 # 100M
+ local pool_hard=10 # 10M
+ local qpool="qpool1"
+
+ pool_add $qpool || error "pool_add failed"
+ pool_add_targets $qpool 0 1 || error "pool_add_targets failed"
+
+ $LFS setquota -u $TSTUSR -b ${glbl_soft}M -B ${glbl_hard}M $DIR ||
+ error "set user quota failed"
+ $LFS setquota -u $TSTUSR -B ${pool_hard}M --pool $qpool $DIR ||
+ error "set user quota failed"
+
+ local tmp=$(getquota -u $TSTUSR global bhardlimit $qpool)
+ [ $tmp -eq $((pool_hard * 1024)) ] ||
+ error "wrong block hard limit $tmp for $qpool"
+ local tmp=$(getquota -u $TSTUSR global bsoftlimit $qpool)
+ # soft limit hasn't been set and should be zero
+ [ $tmp -eq 0 ] || error "wrong soft block limit $tmp for $qpool"
}
-run_test 70 "check lfs setquota/quota with a pool option"
+run_test 70b "lfs setquota pool works properly"
test_71a()
{
[[ $OSTCOUNT -lt 2 ]] && skip "need >= 2 OSTs"
mds_supports_qp
setup_quota_test || error "setup quota failed with $?"
- stack_trap cleanup_quota_test EXIT
# enable ost quota
set_ost_qtype $QTYPE || error "enable ost quota failed"
# write to the 1st component - OST0 is empty
$RUNAS $DD of=$testfile count=$limit seek=0 ||
quota_error u $TSTUSR "write failed"
-
- cleanup_quota_test
}
run_test 71a "Check PFL with quota pools"
[[ $OSTCOUNT -lt 2 ]] && skip "need >= 2 OSTs" && return
mds_supports_qp
setup_quota_test || error "setup quota failed with $?"
- stack_trap cleanup_quota_test EXIT
# enable ost quota
set_ost_qtype $QTYPE || error "enable ost quota failed"
# write over limit in qpool2
$RUNAS $DD of=$testfile count=2 seek=$((128 + limit2)) &&
quota_error u $TSTUSR "user write success, but expect EDQUOT"
-
- cleanup_quota_test
+ return 0
}
run_test 71b "Check SEL with quota pools"
mds_supports_qp
setup_quota_test || error "setup quota failed with $?"
- stack_trap cleanup_quota_test EXIT
# enable ost quota
set_ost_qtype $QTYPE || error "enable ost quota failed"
# was added in a pool
lfs quota -v -u quota_usr --pool $qpool $DIR | grep -v "OST0001" |
grep "OST\|MDT" && error "$qpool consists wrong targets"
-
- cleanup_quota_test
+ return 0
}
run_test 72 "lfs quota --pool prints only pool's OSTs"
-test_73()
+test_73a()
{
local qpool="qpool1"
test_default_quota "-u" "data" "qpool1"
}
-run_test 73 "default limits at OST Pool Quotas"
+run_test 73a "default limits at OST Pool Quotas"
+
+test_73b()
+{
+ local TESTFILE1="$DIR/$tdir/$tfile-1"
+ local limit=20 #20M
+ local qpool="qpool1"
+
+ mds_supports_qp
+
+ setup_quota_test || error "setup quota failed with $?"
+ quota_init
+ set_ost_qtype $QTYPE || error "enable ost quota failed"
+
+ # pool quotas don't work properly without global limit
+ $LFS setquota -u $TSTUSR -b 0 -B ${limit}M -i 0 -I 0 $DIR ||
+ error "set global limit failed"
+
+ pool_add $qpool || error "pool_add failed"
+ pool_add_targets $qpool 0 $((OSTCOUNT - 1)) ||
+ error "pool_add_targets failed"
+
+ log "set default quota for $qpool"
+ $LFS setquota -U --pool $qpool -b ${limit}M -B ${limit}M $DIR ||
+ error "set default quota failed"
+
+ log "Write from user that hasn't lqe"
+ # Check that it doesn't cause a panic or a deadlock
+ # due to nested lqe lookups that rewrite 1st lqe in qti_lqes array.
+ # Have to use RUNAS_ID as resetquota creates lqes in
+ # the beginning for TSTUSR/TSTUSR2 when sets limits to 0.
+ runas -u $RUNAS_ID -g $RUNAS_GID $DD of=$TESTFILE1 count=10
+
+ cancel_lru_locks osc
+ sync; sync_all_data || true
+}
+run_test 73b "default OST Pool Quotas limit for new user"
test_74()
{
mds_supports_qp
setup_quota_test || error "setup quota failed with $?"
- stack_trap cleanup_quota_test EXIT
# enable ost quota
set_ost_qtype $QTYPE || error "enable ost quota failed"
wait_nm_sync active
resetquota -u $TSTUSR
+}
- cleanup_quota_test
+test_dom_75() {
+ local dd_failed=false
+ local LIMIT=20480 #20M
+ local qid=$TSTID
+
+ for ((i = 0; i < $((LIMIT/2048-1)); i++)); do
+ $DD of=$DIR/$tdir_dom/$tfile-$i count=1 \
+ oflag=sync || dd_failed=true
+ done
+
+ $dd_failed && quota_error u $qid "write failed, expect succeed (1)"
+
+ for ((i = $((LIMIT/2048-1)); i < $((LIMIT/1024 + 10)); i++)); do
+ $DD of=$DIR/$tdir_dom/$tfile-$i count=1 \
+ oflag=sync || dd_failed=true
+ done
+
+ $dd_failed || quota_error u $qid "write succeed, expect EDQUOT (1)"
+
+ rm -f $DIR/$tdir_dom/*
+
+ # flush cache, ensure noquota flag is set on client
+ cancel_lru_locks
+ sync; sync_all_data || true
+
+ dd_failed=false
+
+ $DD of=$DIR/$tdir/file count=$((LIMIT/2048-1)) oflag=sync ||
+ quota_error u $qid "write failed, expect succeed (2)"
+
+ for ((i = 0; i < $((LIMIT/2048 + 10)); i++)); do
+ $DD of=$DIR/$tdir_dom/$tfile-$i count=1 \
+ oflag=sync || dd_failed=true
+ done
+
+ $dd_failed || quota_error u $TSTID "write succeed, expect EDQUOT (2)"
+
+ rm -f $DIR/$tdir/*
+ rm -f $DIR/$tdir_dom/*
+
+ # flush cache, ensure noquota flag is set on client
+ cancel_lru_locks
+ sync; sync_all_data || true
+
+ dd_failed=false
+
+ for ((i = 0; i < $((LIMIT/2048-1)); i++)); do
+ $DD of=$DIR/$tdir_dom/$tfile-$i count=1 \
+ oflag=sync || dd_failed=true
+ done
+
+ $dd_failed && quota_error u $qid "write failed, expect succeed (3)"
+
+ $DD of=$DIR/$tdir/file count=$((LIMIT/2048 + 10)) oflag=sync &&
+ quota_error u $qid "write succeed, expect EDQUOT (3)"
+ true
}
test_75()
{
- local limit=10 # MB
+ local soft_limit=10 # MB
+ local hard_limit=20 # MB
+ local limit=$soft_limit
local testfile="$DIR/$tdir/$tfile-0"
+ local grace=20 # seconds
+ local tdir_dom=${tdir}_dom
+
+ if [ $(facet_fstype $SINGLEMDS) = "zfs" ]; then
+ grace=60
+ fi
setup_quota_test || error "setup quota failed with $?"
stack_trap cleanup_quota_test_75 EXIT
# enable ost quota
set_ost_qtype $QTYPE || error "enable ost quota failed"
+ set_mdt_qtype $QTYPE || error "enable mdt quota failed"
- # test for user
- log "User $TSTUSR quota block hardlimit:$limit MB"
- $LFS setquota -u $TSTID -b 0 -B ${limit}M -i 0 -I 0 $DIR ||
- error "set user quota failed"
-
- # make sure the system is clean
local used=$(getquota -u $TSTID global curspace)
- [ $used -ne 0 ] && error "Used space ($used) for user $TSTUSR not 0."
+ $LFS setquota -t -u --block-grace $grace --inode-grace \
+ $MAX_IQ_TIME $DIR || error "set user grace time failed"
+ $LFS setquota -u $TSTUSR -b $((soft_limit+used/1024))M \
+ -B $((hard_limit+used/1024))M -i 0 -I 0 $DIR ||
+ error "set user quota failed"
chmod 777 $DIR/$tdir || error "chmod 777 $DIR/$tdir failed"
+ mkdir $DIR/$tdir_dom
+ chmod 777 $DIR/$tdir_dom
+ $LFS setstripe -E 1M -L mdt $DIR/$tdir_dom ||
+ error "setstripe $tdir_dom failed"
do_facet mgs $LCTL nodemap_activate 1
wait_nm_sync active
wait_nm_sync default trusted_nodemap
wait_nm_sync default squash_uid
+ # mmap write when over soft limit
+ limit=$soft_limit
+ $DD of=$testfile count=${limit} ||
+ quota_error a "root write failure, but expect success (1)"
+ OFFSET=$((limit * 1024))
+ cancel_lru_locks osc
+
+ echo "Write to exceed soft limit"
+ dd if=/dev/zero of=$testfile bs=1K count=10 seek=$OFFSET ||
+ quota_error a $TSTUSR "root write failure, but expect success (2)"
+ OFFSET=$((OFFSET + 1024)) # make sure we don't write to same block
+ cancel_lru_locks osc
+
+ echo "mmap write when over soft limit"
+ $MULTIOP $testfile.mmap OT40960SMW ||
+ quota_error a $TSTUSR "mmap write failure, but expect success"
+ cancel_lru_locks osc
+ rm -f $testfile*
+ wait_delete_completed || error "wait_delete_completed failed (1)"
+ sync_all_data || true
+
+ # test for user hard limit
+ limit=$hard_limit
log "Write..."
$DD of=$testfile bs=1M count=$((limit/2)) ||
quota_error u $TSTID \
- "root write failure, but expect success"
+ "root write failure, but expect success (3)"
log "Write out of block quota ..."
# possibly a cache write, ignore failure
quota_error u $TSTID \
"user write success, but expect EDQUOT"
rm -f $testfile
- wait_delete_completed || error "wait_delete_completed failed"
+ wait_delete_completed || error "wait_delete_completed failed (2)"
sync_all_data || true
- used=$(getquota -u $TSTUSR global curspace)
- [ $used -eq 0 ] || quota_error u $TSTID \
- "user quota not released after deletion"
+ [ $(getquota -u $TSTUSR global curspace) -eq $used ] ||
+ quota_error u $TSTID "user quota not released after deletion"
+
+ test_dom_75
}
run_test 75 "nodemap squashed root respects quota enforcement"
+test_76() {
+ ! is_project_quota_supported &&
+ skip "skip project quota unsupported"
+
+ setup_quota_test || error "setup quota failed with $?"
+ quota_init
+
+ local testfile="$DIR/$tdir/$tfile-0"
+
+ touch $testfile
+ $LFS project -p 4294967295 $testfile &&
+ error "set project ID should fail"
+ return 0
+}
+run_test 76 "project ID 4294967295 should be not allowed"
+
+test_77()
+{
+ mount_client $MOUNT2 "ro"
+ lfs setquota -u quota_usr -b 100M -B 100M -i 10K -I 10K $MOUNT2 &&
+ error "lfs setquota should fail in read-only Lustre mount"
+ umount $MOUNT2
+}
+run_test 77 "lfs setquota should fail in Lustre mount with 'ro'"
+
+test_78()
+{
+ (( $OST1_VERSION >= $(version_code 2.14.55) )) ||
+ skip "need OST at least 2.14.55"
+ check_set_fallocate_or_skip
+
+ setup_quota_test || error "setup quota failed with $?"
+
+ # enable ost quota
+ set_ost_qtype $QTYPE || error "enable ost quota failed"
+
+ mkdir -p $DIR/$tdir || error "failed to create $tdir"
+ chown $TSTUSR $DIR/$tdir || error "failed to chown $tdir"
+
+ # setup quota limit
+ $LFS setquota -u $TSTUSR -b25M -B25M $DIR/$tdir ||
+ error "lfs setquota failed"
+
+ # call fallocate
+ runas -u $TSTUSR -g $TSTUSR fallocate -l 204800 $DIR/$tdir/$tfile
+
+ kbytes=$(lfs quota -u $TSTUSR $DIR |
+ awk -v pattern=$DIR 'match($0, pattern) {printf $2}')
+ echo "kbytes returned:$kbytes"
+
+ # For file size of 204800. We should be having roughly 200 kbytes
+ # returned. Anything alarmingly low (50 taken as arbitrary value)
+ # would bail out this TC. Also this also avoids $kbytes of 0
+ # to be used in calculation below.
+ (( $kbytes > 50 )) ||
+ error "fallocate did not use quota. kbytes returned:$kbytes"
+
+ local expect_lo=$(($kbytes * 95 / 100)) # 5% below
+ local expect_hi=$(($kbytes * 105 / 100)) # 5% above
+
+ # Verify kbytes is 200 (204800/1024). With a permited 5% drift
+ (( $kbytes >= $expect_lo && $kbytes <= $expect_hi )) ||
+ error "fallocate did not use quota correctly"
+}
+run_test 78 "Check fallocate increase quota usage"
+
+test_78a()
+{
+ (( $CLIENT_VERSION >= $(version_code 2.15.0) )) ||
+ skip "need client at least 2.15.0"
+ (( $OST1_VERSION >= $(version_code 2.15.0) )) ||
+ skip "need OST at least 2.15.0"
+ check_set_fallocate_or_skip
+
+ setup_quota_test || error "setup quota failed with $?"
+
+ # enable ost quota
+ set_ost_qtype $QTYPE || error "enable ost quota failed"
+
+ mkdir -p $DIR/$tdir || error "failed to create $tdir"
+
+ local projectid=5200 # Random project id to test
+
+ change_project -sp $projectid $DIR/$tdir
+
+ # setup quota limit
+ $LFS setquota -p $projectid -b25M -B25M $DIR/$tdir ||
+ error "lfs setquota project failed"
+
+ # call fallocate
+ fallocate -l 204800 $DIR/$tdir/$tfile
+
+ # Get curspace (kbytes) for $projectid
+ local kbytes=$(getquota -p $projectid global curspace)
+
+ echo "kbytes returned:$kbytes"
+
+ # For file size of 204800. We should be having roughly 200 kbytes
+ # returned. Anything alarmingly low (50 taken as arbitrary value)
+ # would bail out this TC. Also this also avoids $kbytes of 0
+ # to be used in calculation below.
+ (( $kbytes > 50 )) ||
+ error "fallocate did not use projectid. kbytes returned:$kbytes"
+
+ local expect_lo=$(($kbytes * 95 / 100)) # 5% below
+ local expect_hi=$(($kbytes * 105 / 100)) # 5% above
+
+ # Verify kbytes is 200 (204800/1024). With a permited 5% drift
+ (( $kbytes >= $expect_lo && $kbytes <= $expect_hi )) ||
+ error "fallocate did not use quota projectid correctly"
+}
+run_test 78a "Check fallocate increase projectid usage"
+
+test_79()
+{
+ local qpool="qpool1"
+ local cmd="$LCTL get_param -n qmt.$FSNAME-QMT0000.dt-$qpool.info"
+ local stopf=$TMP/$tfile
+
+ do_facet mds1 "touch $stopf"
+ stack_trap "do_facet mds1 'rm -f $stopf'"
+ do_facet mds1 "while [ -e $stopf ]; do $cmd &>/dev/null; done"&
+ local pid=$!
+ pool_add $qpool || error "pool_add failed"
+ do_facet mds1 "rm $stopf"
+ wait $pid
+}
+run_test 79 "access to non-existed dt-pool/info doesn't cause a panic"
+
+test_80()
+{
+ local dir1="$DIR/$tdir/dir1"
+ local dir2="$DIR/$tdir/dir2"
+ local TESTFILE0="$dir1/$tfile-0"
+ local TESTFILE1="$dir1/$tfile-1"
+ local TESTFILE2="$dir1/$tfile-2"
+ local TESTFILE3="$dir2/$tfile-0"
+ local global_limit=100 # 100M
+ local limit=10 # 10M
+ local qpool="qpool1"
+
+ [ "$OSTCOUNT" -lt "2" ] && skip "needs >= 2 OSTs"
+ mds_supports_qp
+ [ "$ost1_FSTYPE" == zfs ] &&
+ skip "ZFS grants some block space together with inode"
+ setup_quota_test || error "setup quota failed with $?"
+ set_ost_qtype $QTYPE || error "enable ost quota failed"
+
+ # make sure the system is clean
+ local used=$(getquota -u $TSTUSR global curspace)
+ [ $used -ne 0 ] && error "Used space($used) for user $TSTUSR is not 0."
+
+ pool_add $qpool || error "pool_add failed"
+ pool_add_targets $qpool 0 1 ||
+ error "pool_add_targets failed"
+
+ $LFS setquota -u $TSTUSR -b 0 -B ${global_limit}M -i 0 -I 0 $DIR ||
+ error "set user quota failed"
+
+ $LFS setquota -u $TSTUSR -B ${global_limit}M --pool $qpool $DIR ||
+ error "set user quota failed"
+ $LFS setquota -u $TSTUSR -B ${limit}M --pool $qpool $DIR ||
+ error "set user quota failed"
+
+ mkdir -p $dir1 || error "failed to mkdir"
+ chown $TSTUSR.$TSTUSR $dir1 || error "chown $dir1 failed"
+ mkdir -p $dir2 || error "failed to mkdir"
+ chown $TSTUSR.$TSTUSR $dir2 || error "chown $dir2 failed"
+
+ $LFS setstripe $dir1 -i 1 -c 1|| error "setstripe $testfile failed"
+ $LFS setstripe $dir2 -i 0 -c 1|| error "setstripe $testfile failed"
+ lfs getstripe $dir1
+ lfs getstripe $dir2
+ sleep 3
+
+ $LFS quota -uv $TSTUSR $DIR
+ #define OBD_FAIL_QUOTA_PREACQ 0xA06
+ do_facet mds1 $LCTL set_param fail_loc=0xa06
+ $RUNAS $DD of=$TESTFILE3 count=3 ||
+ quota_error u $TSTUSR "write failed"
+ $RUNAS $DD of=$TESTFILE2 count=7 ||
+ quota_error u $TSTUSR "write failed"
+ $RUNAS $DD of=$TESTFILE1 count=1 oflag=direct ||
+ quota_error u $TSTUSR "write failed"
+ sync
+ sleep 3
+ $LFS quota -uv --pool $qpool $TSTUSR $DIR
+
+ rm -f $TESTFILE2
+ stop ost2
+ do_facet mds1 $LCTL set_param fail_loc=0
+ start ost2 $(ostdevname 2) $OST_MOUNT_OPTS || error "start ost2 failed"
+ $LFS quota -uv $TSTUSR --pool $qpool $DIR
+ # OST0 needs some time to update quota usage after removing TESTFILE2
+ sleep 4
+ $LFS quota -uv $TSTUSR --pool $qpool $DIR
+ $RUNAS $DD of=$TESTFILE0 count=2 oflag=direct ||
+ quota_error u $TSTUSR "write failure, but expect success"
+}
+run_test 80 "check for EDQUOT after OST failover"
+
+test_81() {
+ local global_limit=20 # 100M
+ local testfile="$DIR/$tdir/$tfile-0"
+ local qpool="qpool1"
+
+ mds_supports_qp
+ setup_quota_test || error "setup quota failed with $?"
+
+ # enable ost quota
+ set_ost_qtype $QTYPE || error "enable ost quota failed"
+
+ # test for user
+ log "User quota (block hardlimit:$global_limit MB)"
+ $LFS setquota -u $TSTUSR -B 1G $DIR || error "set user quota failed"
+
+ pool_add $qpool || error "pool_add failed"
+ #define OBD_FAIL_QUOTA_RECALC 0xA07
+ do_facet mds1 $LCTL set_param fail_loc=0x80000A07 fail_val=30
+ # added OST casues to start pool recalculation
+ pool_add_targets $qpool 0 0 1
+ stop mds1 -f || error "MDS umount failed"
+
+ #start mds1 back to destroy created pool
+ start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS
+ clients_up || true
+}
+run_test 81 "Race qmt_start_pool_recalc with qmt_pool_free"
+
+test_82()
+{
+ (( $MDS1_VERSION >= $(version_code 2.14.55) )) ||
+ skip "need MDS 2.14.55 or later"
+ is_project_quota_supported ||
+ skip "skip project quota unsupported"
+
+ setup_quota_test || error "setup quota failed with $?"
+ stack_trap cleanup_quota_test
+ quota_init
+
+ local parent_dir="$DIR/$tdir.parent"
+ local child_dir="$parent_dir/child"
+
+ mkdir -p $child_dir
+ stack_trap "chown -R 0:0 $parent_dir"
+
+ chown $TSTUSR:$TSTUSR $parent_dir ||
+ error "failed to chown on $parent_dir"
+ chown $TSTUSR2:$TSTUSRS2 $child_dir ||
+ error "failed to chown on $parent_dir"
+
+ $LFS project -p 1000 $parent_dir ||
+ error "failed to set project id on $parent_dir"
+ $LFS project -p 1001 $child_dir ||
+ error "failed to set project id on $child_dir"
+
+ rmdir $child_dir || error "cannot remove child dir, test failed"
+}
+run_test 82 "verify more than 8 qids for single operation"
+
quota_fini()
{
do_nodes $(comma_list $(nodes_list)) \
git://git.whamcloud.com / fs / lustre-release.git / blobdiff