ONLY=${ONLY:-"$*"}
# test_11 has been used to protect a kernel bug(bz10912), now it isn't
# useful any more. Then add it to ALWAYS_EXCEPT. b=19835
-ALWAYS_EXCEPT="10 11 $SANITY_QUOTA_EXCEPT"
+# We have changed the mechanism of quota, test_12 is meanless now.
+# b=20877
+ALWAYS_EXCEPT="10 12 $SANITY_QUOTA_EXCEPT"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
case `uname -r` in
IUNIT_SZ=${IUNIT_SZ:-10} # min inode quota unit
MAX_DQ_TIME=604800
MAX_IQ_TIME=604800
+SANITY_QUOTA_USERS="quota15_1 quota15_2 quota15_3 quota15_4 quota15_5 quota15_6 \
+ quota15_7 quota15_8 quota15_9 quota15_10 quota15_11 quota15_12 \
+ quota15_13 quota15_14 quota15_15 quota15_16 quota15_17 quota15_18 \
+ quota15_19 quota15_20 quota15_21 quota15_22 quota15_23 quota15_24 \
+ quota15_25 quota15_26 quota15_27 quota15_28 quota15_29 quota15_30"
-unset ENABLE_QUOTA
-
+export MULTIOP=${MULTIOP:-multiop}
TRACE=${TRACE:-""}
LUSTRE=${LUSTRE:-`dirname $0`/..}
. $LUSTRE/tests/test-framework.sh
init_test_env $@
. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
+init_logging
DIRECTIO=${DIRECTIO:-$LUSTRE/tests/directio}
[ $MDSCOUNT -gt 1 ] && skip "CMD case" && exit 0
-remote_mds_nodsh && skip "remote MDS with nodsh" && exit 0
-remote_ost_nodsh && skip "remote OST with nodsh" && exit 0
+
+require_dsh_mds || exit 0
+require_dsh_ost || exit 0
[ "$SLOW" = "no" ] && EXCEPT_SLOW="9 10 11 18b 21"
DIR=${DIR:-$MOUNT}
DIR2=${DIR2:-$MOUNT2}
-check_and_setup_lustre
+QUOTA_AUTO_OLD=$QUOTA_AUTO
+export QUOTA_AUTO=0
-if [ x"$(som_check)" = x"enabled" ]; then
- echo "Som is enabled, Quota is temporary conflicts with it"
- check_and_cleanup_lustre
- exit 0
-fi
+check_and_setup_lustre
LOVNAME=`lctl get_param -n llite.*.lov.common_name | tail -n 1`
OSTCOUNT=`lctl get_param -n lov.$LOVNAME.numobd`
SHOW_QUOTA_USER="$LFS quota -v -u $TSTUSR $DIR"
+SHOW_QUOTA_USERID="$LFS quota -v -u $TSTID $DIR"
SHOW_QUOTA_USER2="$LFS quota -v -u $TSTUSR2 $DIR"
SHOW_QUOTA_GROUP="$LFS quota -v -g $TSTUSR $DIR"
+SHOW_QUOTA_GROUPID="$LFS quota -v -g $TSTID $DIR"
SHOW_QUOTA_GROUP2="$LFS quota -v -g $TSTUSR2 $DIR"
SHOW_QUOTA_INFO_USER="$LFS quota -t -u $DIR"
SHOW_QUOTA_INFO_GROUP="$LFS quota -t -g $DIR"
set_blk_tunesz() {
local btune=$(($1 * BLK_SZ))
# set btune size on all obdfilters
- do_facet ost1 "lctl set_param lquota.${FSNAME}-OST*.quota_btune_sz=$btune"
+ do_nodes $(comma_list $(osts_nodes)) "lctl set_param lquota.${FSNAME}-OST*.quota_btune_sz=$btune"
# set btune size on mds
do_facet $SINGLEMDS "lctl set_param lquota.mdd_obd-${FSNAME}-MDT*.quota_btune_sz=$btune"
}
set_blk_unitsz() {
local bunit=$(($1 * BLK_SZ))
# set bunit size on all obdfilters
- do_facet ost1 "lctl set_param lquota.${FSNAME}-OST*.quota_bunit_sz=$bunit"
+ do_nodes $(comma_list $(osts_nodes)) "lctl set_param lquota.${FSNAME}-OST*.quota_bunit_sz=$bunit"
# set bunit size on mds
do_facet $SINGLEMDS "lctl set_param lquota.mdd_obd-${FSNAME}-MDT*.quota_bunit_sz=$bunit"
}
# set_file_tunesz(itune_sz)
set_file_tunesz() {
local itune=$1
- # set itune size on all obdfilters
- do_facet ost1 "lctl set_param lquota.${FSNAME}-OST*.quota_itune_sz=$itune"
# set itune size on mds
do_facet $SINGLEMDS "lctl set_param lquota.mdd_obd-${FSNAME}-MDT*.quota_itune_sz=$itune"
}
# set_file_unitsz(iunit_sz)
set_file_unitsz() {
local iunit=$1
- # set iunit size on all obdfilters
- do_facet ost1 "lctl set_param lquota.${FSNAME}-OST*.quota_iunit_sz=$iunit"
# set iunit size on mds
do_facet $SINGLEMDS "lctl set_param lquota.mdd_obd-${FSNAME}-MDT*.quota_iunit_sz=$iunit"
}
fi
while [ $((count++)) -lt $timeout ]; do
- $LFS setquota "$1" "$2" -b 0 -B 0 -i 0 -I 0 $MOUNT
- RC=$?
+ local RC=0
+ OUTPUT=`$LFS setquota "$1" "$2" -b 0 -B 0 -i 0 -I 0 $MOUNT 2>&1` || RC=${PIPESTATUS[0]}
if [ $RC -ne 0 ]; then
- if [ $RC -eq 240 ]; then # 240 means -EBUSY
- log "resetquota is blocked for quota master recovery, retry after 1 sec"
- sleep 1
+ if echo "$OUTPUT" | grep -q busy; then
+ log "resetquota is blocked for quota master recovery, retry after $((count * 3)) sec"
+ sleep 3
continue
else
- error "resetquota failed: $RC"
+ error "resetquota failed"
fi
fi
break
log "$*"
}
+#
+# get quota info for a user or a group
+# usage: getquota -u|-g <username>|<groupname> global|<obd_uuid> bhardlimit|bsoftlimit|bgrace|ihardlimit|isoftlimit|igrace
+#
+getquota() {
+ local spec
+ local uuid
+
+ [ "$#" != 4 ] && error "getquota: wrong number of arguments: $#"
+ [ "$1" != "-u" -a "$1" != "-g" ] && error "getquota: wrong u/g specifier $1 passed"
+
+ uuid="$3"
+
+ case "$4" in
+ curspace) spec=1;;
+ bsoftlimit) spec=2;;
+ bhardlimit) spec=3;;
+ bgrace) spec=4;;
+ curinodes) spec=5;;
+ isoftlimit) spec=6;;
+ ihardlimit) spec=7;;
+ igrace) spec=8;;
+ *) error "unknown quota parameter $4";;
+ esac
+
+ [ "$uuid" = "global" ] && uuid=$DIR
+
+ $LFS quota -v "$1" "$2" $DIR | awk 'BEGIN { num='$spec' } { if ($1 == "'$uuid'") { if (NF == 1) { getline } else { num++ } ; print $num;} }' | tr -d "*"
+}
+
quota_show_check() {
LOCAL_BF=$1
LOCAL_UG=$2
$LFS quota -v -$LOCAL_UG $LOCAL_ID $DIR
if [ "$LOCAL_BF" == "a" -o "$LOCAL_BF" == "b" ]; then
- USAGE="`$LFS quota -$LOCAL_UG $LOCAL_ID $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $2 }'`"
+ USAGE=`getquota -$LOCAL_UG $LOCAL_ID global curspace`
if [ -z $USAGE ]; then
quota_error $LOCAL_UG $LOCAL_ID "System is error when query quota for block ($LOCAL_UG:$LOCAL_ID)."
else
fi
if [ "$LOCAL_BF" == "a" -o "$LOCAL_BF" == "f" ]; then
- USAGE="`$LFS quota -$LOCAL_UG $LOCAL_ID $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $5 }'`"
+ USAGE=`getquota -$LOCAL_UG $LOCAL_ID global curinodes`
if [ -z $USAGE ]; then
quota_error $LOCAL_UG $LOCAL_ID "System is error when query quota for file ($LOCAL_UG:$LOCAL_ID)."
else
# set quota
quota_init() {
- $LFS quotacheck -ug $DIR
+ do_nodes $(comma_list $(nodes_list)) "lctl set_param debug=+quota"
- resetquota -u $TSTUSR
- resetquota -g $TSTUSR
+ log "do the quotacheck ..."
+ $LFS quotacheck -ug $DIR
- do_nodes $(comma_list $(nodes_list)) "lctl set_param debug=+quota"
+ resetquota -u $TSTUSR
+ resetquota -g $TSTUSR
}
quota_init
+test_quota_performance() {
+ TESTFILE="$DIR/$tdir/$tfile-0"
+ local size=$1
+ local stime=`date +%s`
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=1M count=$size || quota_error u $TSTUSR "write failure"
+ local etime=`date +%s`
+ delta=$((etime - stime))
+ if [ $delta -gt 0 ]; then
+ rate=$((size * 1024 / delta))
+ [ $rate -gt 1024 ] || error "SLOW IO for $TSTUSR (user): $rate KB/sec"
+ fi
+ rm -f $TESTFILE
+}
+
+# test basic quota performance b=21696
+test_0() {
+ mkdir -p $DIR/$tdir
+ chmod 0777 $DIR/$tdir
+ MB=100
+ [ "$SLOW" = "no" ] && MB=10
+
+ test_quota_performance $MB
+
+ $LFS setquota -u $TSTUSR -b 0 -B $((1024*1024)) -i 0 -I 0 $DIR
+ test_quota_performance $MB
+
+ resetquota -u $TSTUSR
+}
+run_test_with_stat 0 "Test basic quota performance ==="
+
# test for specific quota limitation, qunit, qtune $1=block_quota_limit
test_1_sub() {
LIMIT=$1
chown $TSTUSR.$TSTUSR $TESTFILE
log " Write ..."
- stime=`date +%s`
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) || quota_error u $TSTUSR "(usr) write failure, but expect success"
- etime=`date +%s`
- delta=$((etime - stime))
- if [ $delta -gt 0 ]; then
- rate=$((BLK_SZ * LIMIT / 2 / delta / 1024))
- [ $rate -gt 1024 ] || error "SLOW IO for $TSTUSR (user): $rate KB/sec"
- fi
log " Done"
log " Write out of block quota ..."
# this time maybe cache write, ignore it's failure
rm -f $TESTFILE
sync; sleep 1; sync;
OST0_UUID=`do_facet ost1 $LCTL dl | grep -m1 obdfilter | awk '{print $((NF-1))}'`
- OST0_QUOTA_USED=`$LFS quota -o $OST0_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ OST0_QUOTA_USED=`getquota -u $TSTUSR $OST0_UUID curspace`
echo $OST0_QUOTA_USED
[ $OST0_QUOTA_USED -ne 0 ] && \
($SHOW_QUOTA_USER; quota_error u $TSTUSR "(usr) quota deleted isn't released")
chown $TSTUSR.$TSTUSR $TESTFILE
log " Write ..."
- stime=`date +%s`
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) || quota_error g $TSTUSR "(grp) write failure, but expect success"
- etime=`date +%s`
- delta=$((etime - stime))
- rate=$((BLK_SZ * LIMIT / 2 / delta / 1024))
- [ $rate -gt 1024 ] || error "SLOW IO for $TSTUSR (group): $rate KB/sec"
log " Done"
log " Write out of block quota ..."
# this time maybe cache write, ignore it's failure
rm -f $TESTFILE
sync; sleep 1; sync;
OST0_UUID=`do_facet ost1 $LCTL dl | grep -m1 obdfilter | awk '{print $((NF-1))}'`
- OST0_QUOTA_USED=`$LFS quota -o $OST0_UUID -g $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ OST0_QUOTA_USED=`getquota -g $TSTUSR $OST0_UUID curspace`
echo $OST0_QUOTA_USED
[ $OST0_QUOTA_USED -ne 0 ] && \
($SHOW_QUOTA_GROUP; quota_error g $TSTUSR "(grp) quota deleted isn't released")
sync; sleep 1; sync;
MDS_UUID=`do_facet $SINGLEMDS $LCTL dl | grep -m1 " mdt " | awk '{print $((NF-1))}'`
- MDS_QUOTA_USED=`$LFS quota -o $MDS_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ MDS_QUOTA_USED=`getquota -u $TSTUSR $MDS_UUID curinodes`
echo $MDS_QUOTA_USED
[ $MDS_QUOTA_USED -ne 0 ] && \
($SHOW_QUOTA_USER; quota_error u $TSTUSR "(usr) quota deleted isn't released")
sync; sleep 1; sync;
MDS_UUID=`do_facet $SINGLEMDS $LCTL dl | grep -m1 " mdt " | awk '{print $((NF-1))}'`
- MDS_QUOTA_USED=`$LFS quota -o $MDS_UUID -g $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ MDS_QUOTA_USED=`getquota -g $TSTUSR $MDS_UUID curinodes`
echo $MDS_QUOTA_USED
[ $MDS_QUOTA_USED -ne 0 ] && \
($SHOW_QUOTA_GROUP; quota_error g $TSTUSR "(grp) quota deleted isn't released")
# block quota acquire & release
test_6() {
if [ $OSTCOUNT -lt 2 ]; then
- skip "$OSTCOUNT < 2, too few osts"
+ skip_env "$OSTCOUNT < 2, too few osts"
return 0;
fi
while [ $((count--)) -gt 0 ]; do
sync && sleep 5
- OST0_QUOTA_HOLD=`$LFS quota -o $OST0_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $3 }'`
+ OST0_QUOTA_HOLD=`getquota -u $TSTUSR $OST0_UUID bhardlimit`
if [ -z $OST0_QUOTA_HOLD ]; then
error "System is error when query quota for block (U:$TSTUSR)."
else
while [ $((count--)) -gt 0 ]; do
sync && sleep 5
- OST0_QUOTA_HOLD=`$LFS quota -o $OST0_UUID -g $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $3 }'`
+ OST0_QUOTA_HOLD=`getquota -g $TSTUSR $OST0_UUID bhardlimit`
if [ -z $OST0_QUOTA_HOLD ]; then
error "System is error when query quota for block (G:$TSTUSR)."
else
# check limits
PATTERN="`echo $DIR | sed 's/\//\\\\\//g'`"
- TOTAL_LIMIT="`$LFS quota -v -u $TSTUSR $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $4 }'`"
+ TOTAL_LIMIT=`getquota -u $TSTUSR global bhardlimit`
[ $TOTAL_LIMIT -eq $LIMIT ] || error "total limits not recovery!"
echo " total limits = $TOTAL_LIMIT"
OST0_UUID=`do_facet ost1 "$LCTL dl | grep -m1 obdfilter" | awk '{print $((NF-1))}'`
[ -z "$OST0_UUID" ] && OST0_UUID=`do_facet ost1 "$LCTL dl | grep -m1 obdfilter" | awk '{print $((NF-1))}'`
- OST0_LIMIT="`$LFS quota -o $OST0_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $3 }'`"
+ OST0_LIMIT=`getquota -u $TSTUSR $OST0_UUID bhardlimit`
[ $OST0_LIMIT -eq $BUNIT_SZ ] || error "high limits not released!"
echo " limits on $OST0_UUID = $OST0_LIMIT"
# inode->i_blkbits = min(PTLRPC_MAX_BRW_BITS+1, LL_MAX_BLKSIZE_BITS);
blksize=$((1 << 21)) # 2Mb
size_file=$((GB * 9 / 2))
-# this check is just for test9 and test10
+# this check is just for test_9
OST0_MIN=4900000 #4.67G
check_whether_skip () {
OST0_SIZE=`$LFS df $DIR | awk '/\[OST:0\]/ {print $4}'`
quota_show_check a g $TSTUSR
echo " Set stripe"
- $LFS setstripe $TESTFILE -c 1
+ $LFS setstripe $TESTFILE -c 1 -i 0
touch $TESTFILE
chown $TSTUSR.$TSTUSR $TESTFILE
}
run_test_with_stat 9 "run for fixing bug10707(64bit) ==========="
-# run for fixing bug10707, it need a big room. test for 32bit
-# 2.0 version does not support 32 bit qd_count, so such test is obsolete.
-test_10() {
- mkdir -p $DIR/$tdir
- chmod 0777 $DIR/$tdir
- check_whether_skip && return 0
-
- wait_delete_completed
-
- set_blk_tunesz 512
- set_blk_unitsz 1024
-
- # make qd_count 32 bit
- lustre_fail mds_ost 0xA00
-
- TESTFILE="$DIR/$tdir/$tfile-0"
-
- BLK_LIMIT=$((100 * KB * KB)) # 100G
- FILE_LIMIT=1000000
-
- log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for user: $TSTUSR"
- $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
- log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for group: $TSTUSR"
- $LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
-
- quota_show_check a u $TSTUSR
- quota_show_check a g $TSTUSR
-
- echo " Set stripe"
- $LFS setstripe $TESTFILE -c 1
- touch $TESTFILE
- chown $TSTUSR.$TSTUSR $TESTFILE
-
- log " Write the big file of 4.5 G ..."
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$blksize count=$((size_file / blksize)) || \
- quota_error a $TSTUSR "(usr) write 4.5 G file failure, but expect success"
-
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
-
- log " delete the big file of 4.5 G..."
- $RUNAS rm -f $TESTFILE
- sync; sleep 3; sync;
-
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
-
- RC=$?
-
- # make qd_count 64 bit
- lustre_fail mds_ost 0
-
- set_blk_unitsz $((128 * 1024))
- set_blk_tunesz $((128 * 1024 / 2))
-
- return $RC
-}
-#run_test_with_stat 10 "run for fixing bug10707(32bit) ==========="
-
-test_11() {
- wait_delete_completed
-
- #prepare the test
- block_limit=`(echo 0; df -t lustre -P | awk '{print $(NF - 4)}') | tail -n 1`
- echo $block_limit
- orig_dbr=`sysctl -n vm.dirty_background_ratio`
- orig_dec=`sysctl -n vm.dirty_expire_centisecs`
- orig_dr=`sysctl -n vm.dirty_ratio`
- orig_dwc=`sysctl -n vm.dirty_writeback_centisecs`
- sysctl -w vm.dirty_background_ratio=1
- sysctl -w vm.dirty_expire_centisecs=30
- sysctl -w vm.dirty_ratio=1
- sysctl -w vm.dirty_writeback_centisecs=50
- TESTDIR="$DIR/$tdir"
- local RV=0
-
- #do the test
- local SECS=0
- local REPS=3
- [ "$SLOW" = no ] && REPS=1
- local sleep=20
- local i=1
- while [ $i -le $REPS ]; do
- echo "test: cycle($i of $REPS) start at $(date)"
- mkdir -p $TESTDIR && chmod 777 $TESTDIR
- echo -n " create a file for uid "
- for j in `seq 1 30`; do
- echo -n "$j "
- # 30MB per dd for a total of 900MB (if space even permits)
- runas -u $j dd if=/dev/zero of=$TESTDIR/$tfile bs=$blksize count=15 > /dev/null 2>&1 &
- done
- echo ""
- PROCS=$(ps -ef | grep -v grep | grep "dd if /dev/zero of $TESTDIR" | wc -l)
- LAST_USED=0
- while [ $PROCS -gt 0 ]; do
- sleep 20
- SECS=$((SECS + sleep))
- PROCS=$(ps -ef | grep -v grep | grep "dd if /dev/zero of $TESTDIR" | wc -l)
- USED=$(du -s $TESTDIR | awk '{print $1}')
- PCT=$(($USED * 100 / $block_limit))
- echo "${i}/${REPS} ${PCT}% p${PROCS} t${SECS} "
- if [ $USED -le $LAST_USED ]; then
- kill -9 $(ps -ef | grep "dd if /dev/zero of $TESTDIR" | grep -v grep | awk '{ print $2 }')
- i=$REPS
- RV=2
- break
- fi
- LAST_USED=$USED
- done
- echo " removing the test files..."
- rm -f $TESTDIR/$tfile
- echo "cycle $i done at $(date)"
- i=$[$i+1]
- done
- echo "Test took $SECS sec"
-
- #clean
- sysctl -w vm.dirty_background_ratio=$orig_dbr
- sysctl -w vm.dirty_expire_centisecs=$orig_dec
- sysctl -w vm.dirty_ratio=$orig_dr
- sysctl -w vm.dirty_writeback_centisecs=$orig_dwc
- if [ $RV -ne 0 ]; then
- error "Nothing was written for $SECS sec ... aborting"
- fi
- return $RV
-}
-run_test_with_stat 11 "run for fixing bug10912 ==========="
-
+# 2.0 version does not support 32 bit qd_count,
+# test_10 "run for fixing bug10707(32bit) " is obsolete
# test a deadlock between quota and journal b=11693
test_12() {
chmod 0777 $DIR/$tdir
[ "$(grep $DIR2 /proc/mounts)" ] || mount_client $DIR2 || \
- { skip "Need lustre mounted on $MOUNT2 " && retutn 0; }
+ { skip_env "Need lustre mounted on $MOUNT2 " && retutn 0; }
LIMIT=$(( $BUNIT_SZ * $(($OSTCOUNT + 1)) * 10)) # 10 bunits each sever
TESTFILE="$DIR/$tdir/$tfile-0"
DDPID=$!
echo " step2: testing ......"
- count=0
- while [ true ]; do
- if ! ps -p ${DDPID1} > /dev/null 2>&1; then break; fi
- count=$[count+1]
- if [ $count -gt 64 ]; then
+ local last_size=$(stat -c %s $TESTFILE2)
+ local stall_secs=0
+ local start_secs=$SECONDS
+ while [ -d /proc/${DDPID1} ]; do
+ local size=$(stat -c %s $TESTFILE2)
+ if [ $size -eq $last_size ]; then
+ stall_secs=$[stall_secs+1]
+ else
+ stall_secs=0
+ fi
+ if [ $stall_secs -gt 30 ]; then
lustre_fail ost 0
- quota_error u $TSTUSR2 "dd should be finished!"
+ quota_error u $TSTUSR2 "giving up: dd stalled (i.e. made no progress) for 30 seconds!"
fi
+ last_size=$size
sleep 1
done
- echo "(dd_pid=$DDPID1, time=$count)successful"
+ echo "(dd_pid=$DDPID1, time=$((SECONDS-start_secs)))successful"
#Recover fail_loc and dd will finish soon
lustre_fail ost 0
line=`$LFS quota -v -$1 $2 $DIR | wc -l`
for i in `seq 3 $line`; do
if [ $i -eq 3 ]; then
- field="3 4 6 7"
+ field="3 4 7 8"
else
- field="3 5"
+ field="3 6"
fi
for j in $field; do
tmp=`$LFS quota -v -$1 $2 $DIR | sed -n ${i}p |
$LFS setquota -u root -b 10 -B 10 -i 10 -I 10 $DIR
createmany -m ${TESTFILE} 20 || \
quota_error u root "unexpected: user(root) create files failly!"
- dd if=/dev/zero of=$TESTFILE bs=4k count=4096 || \
+ $MULTIOP ${TESTFILE} oO_CREAT:O_WRONLY:O_DIRECT:w$((4096 * 4096))c || \
quota_error u root "unexpected: user(root) write files failly!"
chmod 666 $TESTFILE
- $RUNAS dd if=/dev/zero of=${TESTFILE} seek=4096 bs=4k count=4096 && \
+ $RUNAS $MULTIOP ${TESTFILE} oO_WRONLY:O_APPEND:O_DIRECT:w$((4096 * 4096))c && \
quota_error u root "unexpected: user(quota_usr) write a file successfully!"
# trigger the llog
# test for user
$LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
- TOTAL_LIMIT="`$LFS quota -v -u $TSTUSR $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $4 }'`"
+ TOTAL_LIMIT=`getquota -u $TSTUSR global bhardlimit`
[ $TOTAL_LIMIT -eq $LIMIT ] || error " (user)total limits = $TOTAL_LIMIT; limit = $LIMIT, failed!"
echo " (user)total limits = $TOTAL_LIMIT; limit = $LIMIT, successful!"
resetquota -u $TSTUSR
# test for group
$LFS setquota -g $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
- TOTAL_LIMIT="`$LFS quota -v -g $TSTUSR $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $4 }'`"
+ TOTAL_LIMIT=`getquota -g $TSTUSR global bhardlimit`
[ $TOTAL_LIMIT -eq $LIMIT ] || error " (group)total limits = $TOTAL_LIMIT; limit = $LIMIT, failed!"
echo " (group)total limits = $TOTAL_LIMIT; limit = $LIMIT, successful!"
resetquota -g $TSTUSR
}
run_test_with_stat 15 "set block quota more than 4T ==="
-# $1=u/g $2=with qunit adjust or not
-test_16_tub() {
- LIMIT=$(( $BUNIT_SZ * $(($OSTCOUNT + 1)) * 4))
- TESTFILE="$DIR/$tdir/$tfile"
- mkdir -p $DIR/$tdir
-
- wait_delete_completed
-
- echo " User quota (limit: $LIMIT kbytes)"
- if [ $1 == "u" ]; then
- $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
- quota_show_check b u $TSTUSR
- else
- $LFS setquota -g $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
- quota_show_check b g $TSTUSR
- fi
-
- $LFS setstripe $TESTFILE -c 1
- chown $TSTUSR.$TSTUSR $TESTFILE
-
- echo " Write ..."
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$((BUNIT_SZ * 4)) || \
- quota_error a $TSTUSR "(usr) write failure, but expect success"
- echo " Done"
- echo " Write out of block quota ..."
- # this time maybe cache write, ignore it's failure
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$((BUNIT_SZ * 4)) || true
- # flush cache, ensure noquota flag is setted on client
- cancel_lru_locks osc
- if [ $2 -eq 1 ]; then
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$((BUNIT_SZ * 4)) || \
- quota_error a $TSTUSR "(write failure, but expect success"
- else
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$((BUNIT_SZ * 4)) && \
- quota_error a $TSTUSR "(write success, but expect EDQUOT"
- fi
-
- rm -f $TESTFILE
- sync; sleep 3; sync;
- resetquota -$1 $TSTUSR
-}
-
-# test without adjusting qunit
-# 2.0 version does not support WITHOUT_CHANGE_QS, so such test is obsolete
-test_16 () {
- set_blk_tunesz $((BUNIT_SZ * 2))
- set_blk_unitsz $((BUNIT_SZ * 4))
- for i in u g; do
- for j in 0 1; do
- # define OBD_FAIL_QUOTA_WITHOUT_CHANGE_QS 0xA01
- echo " grp/usr: $i, adjust qunit: $j"
- echo "-------------------------------"
- [ $j -eq 1 ] && lustre_fail mds_ost 0
- [ $j -eq 0 ] && lustre_fail mds_ost 0xA01
- test_16_tub $i $j
- done
- done
- set_blk_unitsz $((128 * 1024))
- set_blk_tunesz $((128 * 1024 / 2))
-}
-#run_test_with_stat 16 "test without adjusting qunit"
+# 2.0 version does not support WITHOUT_CHANGE_QS,
+# test_16 "test without adjusting qunit" is obsolete
# run for fixing bug14526, failed returned quota reqs shouldn't ruin lustre.
test_17() {
test_18bc_sub() {
type=$1
- LIMIT=$((110 * 1024 )) # 110M
+ LIMIT=$(((100 + $OSTCOUNT * 3) * 1024))
TESTFILE="$DIR/$tdir/$tfile"
mkdir -p $DIR/$tdir
DDPID=$!
do_facet $SINGLEMDS "$LCTL conf_param ${FSNAME}-MDT*.mdd.quota_type=ug"
+ replay_barrier $SINGLEMDS
+
log "failing mds for $((2 * timeout)) seconds"
fail $SINGLEMDS $((2 * timeout))
# check if quotaon successful
$LFS quota -u $TSTUSR $MOUNT 2>&1 | grep -q "quotas are not enabled"
if [ $? -eq 0 ]; then
- error "quotaon failed!"
rm -rf $TESTFILE
+ error "quotaon failed!"
return
fi
sync
cancel_lru_locks mdc
cancel_lru_locks osc
-
- testfile_size=$(stat -c %s $TESTFILE)
- [ $testfile_size -ne $((BLK_SZ * 1024 * 100)) ] && \
- quota_error u $TSTUSR "expect $((BLK_SZ * 1024 * 100)), got ${testfile_size}. Verifying file failed!"
$SHOW_QUOTA_USER
- rm -f $TESTFILE
- sync
resetquota -u $TSTUSR
set_blk_unitsz $((128 * 1024))
set_blk_tunesz $((128 * 1024 / 2))
+ testfile_size=$(stat -c %s $TESTFILE)
+ if [ $testfile_size -ne $((BLK_SZ * 1024 * 100)) ] ; then
+ rm -f $TESTFILE
+ quota_error u $TSTUSR "expect $((BLK_SZ * 1024 * 100)), got ${testfile_size}. Verifying file failed!"
+ fi
+ rm -f $TESTFILE
+
}
# test when mds does failover, the ost still could work well
# check if watchdog is triggered
do_facet ost1 dmesg > $TMP/lustre-log-${TESTNAME}.log
watchdog=`awk '/test 18b/ {start = 1;}
- /Watchdog triggered/ {
+ /Service thread pid/ && /was inactive/ {
if (start) {
print;
}
--inode-hardlimit ${LSTR[3]} \
$MOUNT || error "could not set quota limits"
- ($LFS quota -v -u $TSTUSR $MOUNT | \
- grep -E '^ *'$MOUNT' *[0-9]+\** *'${LVAL[0]}' *'${LVAL[1]}' *[0-9]+\** *'${LVAL[2]}' *'${LVAL[3]}) \
- || error "lfs quota output is unexpected"
+ [ "`getquota -u $TSTUSR global bsoftlimit`" = "${LVAL[0]}" ] || error "bsoftlimit was not set properly"
+ [ "`getquota -u $TSTUSR global bhardlimit`" = "${LVAL[1]}" ] || error "bhardlimit was not set properly"
+ [ "`getquota -u $TSTUSR global isoftlimit`" = "${LVAL[2]}" ] || error "isoftlimit was not set properly"
+ [ "`getquota -u $TSTUSR global ihardlimit`" = "${LVAL[3]}" ] || error "ihardlimit was not set properly"
resetquota -u $TSTUSR
}
sleep 3
quota_show_check b u $TSTUSR
- $LFS setstripe $TESTFILE -c 1
+ $LFS setstripe $TESTFILE -c 1 -i 0
chown $TSTUSR.$TSTUSR $TESTFILE
log " Step1: trigger quota with 0_DIRECT"
rm -f $TESTFILE
wait_delete_completed
OST0_UUID=`do_facet ost1 $LCTL dl | grep -m1 obdfilter | awk '{print $((NF-1))}'`
- OST0_QUOTA_USED=`$LFS quota -o $OST0_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ OST0_QUOTA_USED=`getquota -u $TSTUSR $OST0_UUID curspace`
echo $OST0_QUOTA_USED
[ $OST0_QUOTA_USED -ne 0 ] && \
($SHOW_QUOTA_USER; quota_error u $TSTUSR "quota deleted isn't released")
}
test_23() {
- log "run for $((OSTCOUNT * 4))MB test file"
- test_23_sub $((OSTCOUNT * 4 * 1024))
+ local slave_cnt=$((OSTCOUNT + 1)) # 1 mds, n osts
+
+ OST0_MIN=$((6 * $slave_cnt * 1024)) # extra space for meta blocks.
+ check_whether_skip && return 0
+ log "run for $((4 * $slave_cnt))MB test file"
+ test_23_sub $((4 * $slave_cnt * 1024))
- OST0_MIN=120000
+ OST0_MIN=$((60 * $slave_cnt * 1024)) # extra space for meta blocks.
check_whether_skip && return 0
- log "run for $((OSTCOUNT * 40))MB test file"
- test_23_sub $((OSTCOUNT * 40 * 1024))
+ log "run for $((40 * $slave_cnt))MB test file"
+ test_23_sub $((40 * $slave_cnt * 1024))
}
run_test_with_stat 23 "run for fixing bug16125 ==========="
$LFS setstripe $DIR/$tdir -c 1 -i 0
MDS_UUID=`do_facet $SINGLEMDS $LCTL dl | grep -m1 " mdt " | awk '{print $((NF-1))}'`
OST0_UUID=`do_facet ost1 $LCTL dl | grep -m1 obdfilter | awk '{print $((NF-1))}'`
- MDS_QUOTA_USED_OLD=`$LFS quota -o $MDS_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
- OST0_QUOTA_USED_OLD=`$LFS quota -o $OST0_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
- MDS_QUOTA_USED2_OLD=`$LFS quota -o $MDS_UUID $1 $TSTUSR2 $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
- OST0_QUOTA_USED2_OLD=`$LFS quota -o $OST0_UUID $1 $TSTUSR2 $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ MDS_QUOTA_USED_OLD=`getquota $1 $TSTUSR $MDS_UUID curinodes`
+ OST0_QUOTA_USED_OLD=`getquota $1 $TSTUSR $OST0_UUID curspace`
+ MDS_QUOTA_USED2_OLD=`getquota $1 $TSTUSR2 $MDS_UUID curinodes`
+ OST0_QUOTA_USED2_OLD=`getquota $1 $TSTUSR2 $OST0_UUID curspace`
# TSTUSR write 4M
log "$TSTUSR write 4M to $TESTFILE"
sync
show_quota $1 $TSTUSR
show_quota $1 $TSTUSR2
- MDS_QUOTA_USED_NEW=`$LFS quota -o $MDS_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ MDS_QUOTA_USED_NEW=`getquota $1 $TSTUSR $MDS_UUID curinodes`
[ $MDS_QUOTA_USED_NEW -ne $((MDS_QUOTA_USED_OLD + 1)) ] && \
quota_error a $TSTUSR "$TSTUSR inode quota usage error: [$MDS_QUOTA_USED_OLD|$MDS_QUOTA_USED_NEW]"
- OST0_QUOTA_USED_NEW=`$LFS quota -o $OST0_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ OST0_QUOTA_USED_NEW=`getquota $1 $TSTUSR $OST0_UUID curspace`
OST0_QUOTA_USED_DELTA=$((OST0_QUOTA_USED_NEW - OST0_QUOTA_USED_OLD))
[ $OST0_QUOTA_USED_DELTA -lt 4096 ] && \
quota_error a $TSTUSR "$TSTUSR block quota usage error: [$OST0_QUOTA_USED_OLD|$OST0_QUOTA_USED_NEW]"
sync
show_quota $1 $TSTUSR
show_quota $1 $TSTUSR2
- MDS_QUOTA_USED2_NEW=`$LFS quota -o $MDS_UUID $1 $TSTUSR2 $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ MDS_QUOTA_USED2_NEW=`getquota $1 $TSTUSR2 $MDS_UUID curinodes`
[ $MDS_QUOTA_USED2_NEW -ne $((MDS_QUOTA_USED2_OLD + 1)) ] && \
quota_error a $TSTUSR2 "$TSTUSR2 inode quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$MDS_QUOTA_USED2_OLD|$MDS_QUOTA_USED2_NEW]"
- OST0_QUOTA_USED2_NEW=`$LFS quota -o $OST0_UUID $1 $TSTUSR2 $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ OST0_QUOTA_USED2_NEW=`getquota $1 $TSTUSR2 $OST0_UUID curspace`
+ # when chown, the quota on ost could be displayed out of quota temporarily. Delete the '*' in this situation. b=20433
+ OST0_QUOTA_USED2_NEW=${OST0_QUOTA_USED2_NEW%\*}
OST0_QUOTA_USED2_DELTA=$((OST0_QUOTA_USED2_NEW - OST0_QUOTA_USED2_OLD))
[ $OST0_QUOTA_USED2_DELTA -ne $OST0_QUOTA_USED_DELTA ] && \
quota_error a $TSTUSR2 "$TSTUSR2 block quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$OST0_QUOTA_USED2_OLD|$OST0_QUOTA_USED2_NEW]"
- MDS_QUOTA_USED_NEW=`$LFS quota -o $MDS_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ MDS_QUOTA_USED_NEW=`getquota $1 $TSTUSR $MDS_UUID curinodes`
[ $MDS_QUOTA_USED_NEW -ne $MDS_QUOTA_USED_OLD ] && \
quota_error a $TSTUSR "$TSTUSR inode quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$MDS_QUOTA_USED_OLD|$MDS_QUOTA_USED_NEW]"
- OST0_QUOTA_USED_NEW=`$LFS quota -o $OST0_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ OST0_QUOTA_USED_NEW=`getquota $1 $TSTUSR $OST0_UUID curspace`
[ $OST0_QUOTA_USED_NEW -ne $OST0_QUOTA_USED_OLD ] && \
quota_error a $TSTUSR "$TSTUSR block quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$OST0_QUOTA_USED_OLD|$OST0_QUOTA_USED_NEW]"
}
run_test_with_stat 26 "test for false quota error(bz18491) ======================================"
-test_27() {
+test_27a() {
$LFS quota $TSTUSR $DIR && error "lfs succeeded with no type, but should have failed"
$LFS setquota $TSTUSR $DIR && error "lfs succeeded with no type, but should have failed"
return 0
}
-run_test_with_stat 27 "lfs quota/setquota should handle wrong arguments (19612) ================="
+run_test_with_stat 27a "lfs quota/setquota should handle wrong arguments (19612) ================="
+
+test_27b() {
+ $LFS setquota -u $TSTID -b 1000 -B 1000 -i 1000 -I 1000 $DIR || \
+ error "lfs setquota failed with uid argument"
+ $LFS setquota -g $TSTID -b 1000 -B 1000 -i 1000 -I 1000 $DIR || \
+ error "lfs stequota failed with gid argument"
+ $SHOW_QUOTA_USERID || error "lfs quota failed with uid argument"
+ $SHOW_QUOTA_GROUPID || error "lfs quota failed with gid argument"
+ resetquota -u $TSTUSR
+ resetquota -g $TSTUSR
+ return 0
+}
+run_test 27b "lfs quota/setquota should handle user/group ID (20200) ================="
test_28() {
BLK_LIMIT=$((100 * 1024 * 1024)) # 100G
}
run_test_with_stat 28 "test for consistency for qunit when setquota (18574) ==========="
+test_29()
+{
+ local BLK_LIMIT=$((100 * 1024 * 1024)) # 100G
+ local timeout
+ local pid
+
+ if at_is_enabled; then
+ timeout=$(at_max_get client)
+ at_max_set 10 client
+ else
+ timeout=$(lctl get_param -n timeout)
+ lctl set_param timeout=10
+ fi
+ # actually send a RPC to make service at_current confined within at_max
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I 0 $DIR || error "should succeed"
+
+ #define OBD_FAIL_MDS_QUOTACTL_NET 0x12e
+ lustre_fail mds 0x12e
+
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I 0 $DIR & pid=$!
+
+ echo "sleeping for 10 * 1.25 + 5 + 10 seconds"
+ sleep 28
+ ps -p $pid && error "lfs hadn't finished by timeout"
+ wait $pid && error "succeeded, but should have failed"
+
+ lustre_fail mds 0
+
+ if at_is_enabled; then
+ at_max_set $timeout client
+ else
+ lctl set_param timeout=$timeout
+ fi
+
+ resetquota -u $TSTUSR
+}
+run_test_with_stat 29 "unhandled quotactls must not hang lustre client (19778) ========"
+
test_30()
{
local output
local TESTFILE="$DIR/$tdir/$tfile"
local GRACE=10
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+
mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
+ $LFS setstripe $TESTFILE -i 0 -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
$LFS setquota -t -u --block-grace $GRACE --inode-grace $MAX_IQ_TIME $DIR
$LFS setquota -u $TSTUSR -b $LIMIT -B 0 -i 0 -I 0 $DIR
$RUNAS dd if=/dev/zero of=$TESTFILE bs=1024 count=$((LIMIT * 2)) || true
cancel_lru_locks osc
- sleep 5
+ sleep $GRACE
$LFS setquota -u $TSTUSR -B 0 $DIR
- output=`$SHOW_QUOTA_USER | grep $MOUNT | awk '{ print $5 }' | tr -d s`
- [ "$output" -le "$((GRACE - 5))" ] || error "grace times were reset or unexpectedly high latency"
+ # over-quota flag has not yet settled since we do not trigger async events
+ # based on grace time period expiration
+ $SHOW_QUOTA_USER
+ $RUNAS dd if=/dev/zero of=$TESTFILE conv=notrunc oflag=append bs=1048576 count=1 || true
+ cancel_lru_locks osc
+ # now over-quota flag should be settled and further writes should fail
+ $SHOW_QUOTA_USER
+ $RUNAS dd if=/dev/zero of=$TESTFILE conv=notrunc oflag=append bs=1048576 count=1 && error "grace times were reset"
rm -f $TESTFILE
resetquota -u $TSTUSR
$LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace $MAX_IQ_TIME $DIR
+
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
}
run_test_with_stat 30 "hard limit updates should not reset grace times ================"
+# test duplicate quota releases b=18630
+test_31() {
+ mkdir -p $DIR/$tdir
+ chmod 0777 $DIR/$tdir
+
+ LIMIT=$(( $BUNIT_SZ * $(($OSTCOUNT + 1)) * 10)) # 10 bunits each sever
+ TESTFILE="$DIR/$tdir/$tfile-0"
+ TESTFILE2="$DIR/$tdir/$tfile-1"
+
+ wait_delete_completed
+
+ log " User quota (limit: $LIMIT kbytes)"
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+
+ $LFS setstripe $TESTFILE -i 0 -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
+ $LFS setstripe $TESTFILE2 -i 0 -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE2
+
+ log " step1: write out of block quota ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=5120
+ $RUNAS dd if=/dev/zero of=$TESTFILE2 bs=$BLK_SZ count=5120
+
+ #define OBD_FAIL_QUOTA_DELAY_SD 0xA04
+ #define OBD_FAIL_SOME 0x10000000 /* fail N times */
+ lustre_fail ost $((0x00000A04 | 0x10000000)) 1
+
+ log " step2: delete two files so that triggering duplicate quota release ..."
+ rm -f $TESTFILE $TESTFILE2
+ sync; sleep 5; sync # OBD_FAIL_QUOTA_DELAY_SD will delay for 5 seconds
+ wait_delete_completed
+
+ log " step3: verify if the ost failed"
+ do_facet ost1 dmesg > $TMP/lustre-log-${TESTNAME}.log
+ watchdog=`awk '/test 31/ {start = 1;}
+ /release quota error/ {
+ if (start) {
+ print;
+ }
+ }' $TMP/lustre-log-${TESTNAME}.log`
+ [ "$watchdog" ] && error "$watchdog"
+ rm -f $TMP/lustre-log-${TESTNAME}.log
+
+ lustre_fail ost 0
+ resetquota -u $TSTUSR
+}
+run_test_with_stat 31 "test duplicate quota releases ==="
+
+# check hash_cur_bits
+check_quota_hash_cur_bits() {
+ local bits=$1
+
+ # check quota_hash_cur_bits on all obdfilters
+ for num in `seq $OSTCOUNT`; do
+ cb=`do_facet ost$num "cat /sys/module/lquota/parameters/hash_lqs_cur_bits"`
+ if [ $cb -gt $bits ]; then
+ echo "hash_lqs_cur_bits of ost$num is too large(cur_bits=$cb)"
+ return 1;
+ fi
+ done
+ # check quota_hash_cur_bits on mds
+ cb=`do_facet $SINGLEMDS "cat /sys/module/lquota/parameters/hash_lqs_cur_bits"`
+ if [ $cb -gt $bits ]; then
+ echo "hash_lqs_cur_bits of mds is too large(cur_bits=$cb)"
+ return 1;
+ fi
+ return 0;
+}
+
+# check lqs hash
+check_lqs_hash() {
+ # check distribution of all obdfilters
+ for num in `seq $OSTCOUNT`; do
+ do_facet ost$num "lctl get_param obdfilter.${FSNAME}-OST*.hash_stats | grep LQS_HASH" | while read line; do
+ rehash_count=`echo $line | awk '{print $9}'`
+ if [ $rehash_count -eq 0 ]; then
+ echo -e "ost$num:\n $line"
+ error "Rehearsh didn't happen"
+ fi
+ done
+ done
+ # check distribution of mds
+ do_facet $SINGLEMDS "lctl get_param mdt.${FSNAME}-MDT*.hash_stats | grep LQS_HASH" | while read line; do
+ rehash_count=`echo $line | awk '{print $9}'`
+ if [ $rehash_count -eq 0 ]; then
+ echo -e "mdt:\n $line"
+ error "Rehearsh didn't happen"
+ fi
+ done
+}
+
+test_32()
+{
+ # reset system so that quota_hash_cur_bits==3
+ echo "Reset system ..."
+ local LMR_orig=$LOAD_MODULES_REMOTE
+ LOAD_MODULES_REMOTE=true
+ cleanup_and_setup_lustre
+ LOAD_MODULES_REMOTE=$LMR_orig
+
+ client_up
+ wait_mds_ost_sync
+ quota_init
+
+ for user in $SANITY_QUOTA_USERS; do
+ check_runas_id_ret $user quota_usr "runas -u $user -g quota_usr" >/dev/null 2>/dev/null || \
+ missing_users="$missing_users $user"
+ done
+ [ -n "$missing_users" ] && { skip_env "the following users are missing: $missing_users" ; return 0 ; }
+ check_quota_hash_cur_bits 3 || { skip_env "hash_lqs_cur_bits isn't set properly"; return 0;}
+
+ $LFS quotaoff -ug $DIR
+ $LFS quotacheck -ug $DIR
+
+ for user in $SANITY_QUOTA_USERS; do
+ $LFS setquota -u $user --block-hardlimit 1048576 $DIR
+ done
+
+ check_lqs_hash
+
+ for user in $SANITY_QUOTA_USERS; do
+ resetquota -u $user
+ done
+}
+run_test 32 "check lqs hash(bug 21846) =========================================="
+
+cleanup_quota_test() {
+ trap 0
+ echo "Delete files..."
+ rm -rf $DIR/$tdir
+}
+
+# basic usage tracking for user & group
+test_33() {
+ mkdir -p $DIR/$tdir
+ chmod 0777 $DIR/$tdir
+ INODES=10
+ BLK_CNT=1024
+ TOTAL_BLKS=$(($INODES * $BLK_CNT))
+
+ trap cleanup_quota_test EXIT
+
+ # make sure the system is clean
+ USED=`getquota -u $TSTID global curspace`
+ [ $USED -ne 0 ] && \
+ error "Used space ($USED) for user $TSTID isn't 0."
+ USED=`getquota -g $TSTID global curspace`
+ [ $USED -ne 0 ] && \
+ error "Used space ($USED) for group $TSTID isn't 0."
+
+ echo "Write files..."
+ for i in `seq 0 $INODES`; do
+ $RUNAS dd if=/dev/zero of=$DIR/$tdir/$tfile-$i bs=$BLK_SZ \
+ count=$BLK_CNT oflag=sync 2>/dev/null || error "write failed"
+ done
+
+ echo "Verify disk usage after write"
+ USED=`getquota -u $TSTID global curspace`
+ [ $USED -lt $TOTAL_BLKS ] && \
+ error "Used space for user $TSTID is $USED, expected $TOTAL_BLKS"
+ USED=`getquota -u $TSTID global curinodes`
+ [ $USED -lt $INODES ] && \
+ error "Used inode for user $TSTID is $USED, expected $INODES"
+
+ USED=`getquota -g $TSTID global curspace`
+ [ $USED -lt $TOTAL_BLKS ] && \
+ error "Used space for group $TSTID is $USED, expected $TOTAL_BLKS"
+ USED=`getquota -g $TSTID global curinodes`
+ [ $USED -lt $INODES ] && \
+ error "Used inode for group $TSTID is $USED, expected $INODES"
+
+ cleanup_quota_test
+
+ echo "Verify disk usage after delete"
+ wait_delete_completed
+ USED=`getquota -u $TSTID global curspace`
+ [ $USED -eq 0 ] || error "Used space for user $TSTID isn't 0. $USED"
+ USED=`getquota -u $TSTID global curinodes`
+ [ $USED -eq 0 ] || error "Used inodes for user $TSTID isn't 0. $USED"
+ USED=`getquota -g $TSTID global curspace`
+ [ $USED -eq 0 ] || error "Used space for group $TSTID isn't 0. $USED"
+ USED=`getquota -g $TSTID global curinodes`
+ [ $USED -eq 0 ] || error "Used inodes for group $TSTID isn't 0. $USED"
+}
+run_test 33 "basic usage tracking for user & group =============================="
+
+# usage transfer test for user & group
+test_34() {
+ BLK_CNT=1024
+ mkdir -p $DIR/$tdir
+ chmod 0777 $DIR/$tdir
+
+ trap cleanup_quota_test EXIT
+
+ # make sure the system is clean
+ USED=`getquota -u $TSTID global curspace`
+ [ $USED -ne 0 ] && error "Used space ($USED) for user $TSTID isn't 0."
+ USED=`getquota -g $TSTID global curspace`
+ [ $USED -ne 0 ] && error "Used space ($USED) for group $TSTID isn't 0."
+
+ echo "Write file..."
+ dd if=/dev/zero of=$DIR/$tdir/$tfile bs=$BLK_SZ count=$BLK_CNT \
+ oflag=sync 2>/dev/null || error "write failed"
+
+ echo "chown the file to user $TSTID"
+ chown $TSTID $DIR/$tdir/$tfile || error "chown failed"
+
+ echo "Verify disk usage for user $TSTID"
+ USED=`getquota -u $TSTID global curspace`
+ [ $USED -lt $BLK_CNT ] && \
+ error "Used space for user $TSTID is $USED, expected $BLK_CNT"
+ USED=`getquota -u $TSTID global curinodes`
+ [ $USED -ne 1 ] && \
+ error "Used inodes for user $TSTID is $USED, expected 1"
+
+ echo "chgrp the file to group $TSTID"
+ chgrp $TSTID $DIR/$tdir/$tfile || error "chgrp failed"
+
+ echo "Verify disk usage for group $TSTID"
+ USED=`getquota -g $TSTID global curspace`
+ [ $USED -ge $BLK_CNT ] || \
+ error "Used space for group $TSTID is $USED, expected $BLK_CNT"
+ USED=`getquota -g $TSTID global curinodes`
+ [ $USED -eq 1 ] || \
+ error "Used inodes for group $TSTID is $USED, expected 1"
+
+ cleanup_quota_test
+}
+run_test 34 "usage transfer for user & group ===================================="
+
+# usage is still accessible across restart
+test_35() {
+ mkdir -p $DIR/$tdir
+ chmod 0777 $DIR/$tdir
+ BLK_CNT=1024
+
+ trap cleanup_quota_test EXIT
+
+ echo "Write file..."
+ $RUNAS dd if=/dev/zero of=$DIR/$tdir/$tfile bs=$BLK_SZ \
+ count=$BLK_CNT oflag=sync 2>/dev/null || error "write failed"
+
+ echo "Save disk usage before restart"
+ ORIG_USR_SPACE=`getquota -u $TSTID global curspace`
+ [ $ORIG_USR_SPACE -eq 0 ] && \
+ error "Used space for user $TSTID is 0, expected $BLK_CNT"
+ ORIG_USR_INODES=`getquota -u $TSTID global curinodes`
+ [ $ORIG_USR_INODES -eq 0 ] && \
+ error "Used inodes for user $TSTID is 0, expected 1"
+ ORIG_GRP_SPACE=`getquota -g $TSTID global curspace`
+ [ $ORIG_GRP_SPACE -eq 0 ] && \
+ error "Used space for group $TSTID is 0, expected $BLK_CNT"
+ ORIG_GRP_INODES=`getquota -g $TSTID global curinodes`
+ [ $ORIG_GRP_INODES -eq 0 ] && \
+ error "Used inodes for group $TSTID is 0, expected 1"
+
+ log "Restart..."
+ local ORIG_REFORMAT=$REFORMAT
+ REFORMAT=""
+ cleanup_and_setup_lustre
+ REFORMAT=$ORIG_REFORMAT
+ quota_init
+
+ echo "Verify disk usage after restart"
+ USED=`getquota -u $TSTID global curspace`
+ [ $USED -eq $ORIG_USR_SPACE ] || \
+ error "Used space for user $TSTID changed from " \
+ "$ORIG_USR_SPACE to $USED"
+ USED=`getquota -u $TSTID global curinodes`
+ [ $USED -eq $ORIG_USR_INODES ] || \
+ error "Used inodes for user $TSTID changed from " \
+ "$ORIG_USR_INODES to $USED"
+ USED=`getquota -g $TSTID global curspace`
+ [ $USED -eq $ORIG_GRP_SPACE ] || \
+ error "Used space for group $TSTID changed from " \
+ "$ORIG_GRP_SPACE to $USED"
+ USED=`getquota -g $TSTID global curinodes`
+ [ $USED -eq $ORIG_GRP_INODES ] || \
+ error "Used inodes for group $TSTID changed from " \
+ "$ORIG_GRP_INODES to $USED"
+
+ cleanup_quota_test
+}
+run_test 35 "usage is still accessible across reboot ============================"
+
+
# turn off quota
quota_fini()
{
}
quota_fini
-log "cleanup: ======================================================"
cd $ORIG_PWD
+complete $(basename $0) $SECONDS
check_and_cleanup_lustre
-echo '=========================== finished ==============================='
-[ -f "$QUOTALOG" ] && cat $QUOTALOG && grep -q FAIL $QUOTALOG && exit 1 || true
-echo "$0: completed"
+export QUOTA_AUTO=$QUOTA_AUTO_OLD
+exit_status