init_logging
DIRECTIO=${DIRECTIO:-$LUSTRE/tests/directio}
-[ $MDSCOUNT -gt 1 ] && skip "CMD case" && exit 0
-
require_dsh_mds || exit 0
require_dsh_ost || exit 0
skip "e2fsprogs doesn't support quota" && exit 0
fi
+[ $(facet_fstype $SINGLEMDS) = "zfs" ] &&
+# bug number for skipped test: LU-2836 LU-2837 LU-2059
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 3 6 7d"
+
[ "$SLOW" = "no" ] && EXCEPT_SLOW="9 18 21"
QUOTALOG=${TESTSUITELOG:-$TMP/$(basename $0 .sh).log}
[ "$1" != "-u" -a "$1" != "-g" ] &&
error "resetquota: wrong specifier $1 passed"
- $LFS setquota "$1" "$2" -b 0 -B 0 -i 0 -I 0 $MOUNT
+ $LFS setquota "$1" "$2" -b 0 -B 0 -i 0 -I 0 $MOUNT ||
+ error "clear quota for [type:$1 name:$2] failed"
# give a chance to slave to release space
sleep 1
}
# usage: set_mdt_qtype ug|u|g|none
set_mdt_qtype() {
local qtype=$1
- local varsvc=${SINGLEMDS}_svc
+ local varsvc
+ local mdts=$(get_facets MDS)
+ local cmd
do_facet mgs $LCTL conf_param $FSNAME.quota.mdt=$qtype
- if $(facet_up $SINGLEMDS); then
- wait_update_facet $SINGLEMDS "$LCTL get_param -n \
- osd-$FSTYPE.${!varsvc}.quota_slave.enabled" "$qtype" ||
- return 1
- fi
+ # we have to make sure each MDT received config changes
+ for mdt in ${mdts//,/ }; do
+ varsvc=${mdt}_svc
+ cmd="$LCTL get_param -n "
+ cmd=${cmd}osd-$(facet_fstype $mdt).${!varsvc}
+ cmd=${cmd}.quota_slave.enabled
+
+ if $(facet_up $mdt); then
+ wait_update_facet $mdt "$cmd" "$qtype" || return 1
+ fi
+ done
return 0
}
# set ost quota type
-# usage: set_ost_quota_type ug|u|g|none
+# usage: set_ost_qtype ug|u|g|none
set_ost_qtype() {
local qtype=$1
local varsvc
local osts=$(get_facets OST)
+ local cmd
do_facet mgs $LCTL conf_param $FSNAME.quota.ost=$qtype
# we have to make sure each OST received config changes
for ost in ${osts//,/ }; do
varsvc=${ost}_svc
+ cmd="$LCTL get_param -n "
+ cmd=${cmd}osd-$(facet_fstype $ost).${!varsvc}
+ cmd=${cmd}.quota_slave.enabled
+
if $(facet_up $ost); then
- wait_update_facet $ost "$LCTL get_param -n \
- osd-$FSTYPE.${!varsvc}.quota_slave.enabled" \
- "$qtype" || return 1
+ wait_update_facet $ost "$cmd" "$qtype" || return 1
fi
done
return 0
wait_reintegration() {
local ntype=$1
local qtype=$2
+ local max=$3
local result="glb[1],slv[1],reint[0]"
local varsvc
+ local cmd
+ local tgts
if [ $ntype == "mdt" ]; then
- varsvc=${SINGLEMDS}_svc
- if $(facet_up $SINGLEMDS); then
- wait_update_facet $SINGLEMDS "$LCTL get_param -n \
- osd-$FSTYPE.${!varsvc}.quota_slave.info |
- grep "$qtype" | awk '{ print \\\$3 }'" "$result" ||
- return 1
- fi
+ tgts=$(get_facets MDS)
else
- local osts=$(get_facets OST)
- for ost in ${osts//,/ }; do
- varsvc=${ost}_svc
- if $(facet_up $ost); then
- wait_update_facet $ost "$LCTL get_param -n \
- osd-$FSTYPE.${!varsvc}.quota_slave.info |
- grep "$qtype" | awk '{ print \\\$3 }'" \
- "$result" || return 1
- fi
- done
+ tgts=$(get_facets OST)
fi
+
+ for tgt in ${tgts//,/ }; do
+ varsvc=${tgt}_svc
+ cmd="$LCTL get_param -n "
+ cmd=${cmd}osd-$(facet_fstype $tgt).${!varsvc}
+ cmd=${cmd}.quota_slave.info
+
+ if $(facet_up $tgt); then
+ wait_update_facet $tgt "$cmd |
+ grep "$qtype" | awk '{ print \\\$3 }'" \
+ "$result" $max || return 1
+ fi
+ done
return 0
}
wait_mdt_reint() {
local qtype=$1
+ local max=${2:-90}
if [ $qtype == "u" ] || [ $qtype == "ug" ]; then
- wait_reintegration "mdt" "user" || return 1
+ wait_reintegration "mdt" "user" $max || return 1
fi
if [ $qtype == "g" ] || [ $qtype == "ug" ]; then
- wait_reintegration "mdt" "group" || return 1
+ wait_reintegration "mdt" "group" $max || return 1
fi
return 0
}
wait_ost_reint() {
local qtype=$1
+ local max=${2:-90}
if [ $qtype == "u" ] || [ $qtype == "ug" ]; then
- wait_reintegration "ost" "user" || return 1
+ wait_reintegration "ost" "user" $max || return 1
fi
if [ $qtype == "g" ] || [ $qtype == "ug" ]; then
- wait_reintegration "ost" "group" || return 1
+ wait_reintegration "ost" "group" $max || return 1
fi
return 0
}
wait_delete_completed
echo "Creating test directory"
mkdir -p $DIR/$tdir
- chmod 077 $DIR/$tdir
+ chmod 0777 $DIR/$tdir
# always clear fail_loc in case of fail_loc isn't cleared
# properly when previous test failed
lustre_fail mds_ost 0
}
quota_init
+resetquota -u $TSTUSR
+resetquota -g $TSTUSR
+resetquota -u $TSTUSR2
+resetquota -g $TSTUSR2
+
test_quota_performance() {
local TESTFILE="$DIR/$tdir/$tfile-0"
local size=$1 # in MB
local MB=100 # 100M
[ "$SLOW" = "no" ] && MB=10
- local free_space=$(lfs df | grep "filesystem summary" | \
- awk '{print $5}')
+ local free_space=$(lfs_df | grep "summary" | awk '{print $4}')
[ $free_space -le $((MB * 1024)) ] &&
skip "not enough space ${free_space} KB, " \
"required $((MB * 1024)) KB" && return
test_quota_performance $MB
set_ost_qtype "ug" || error "enable ost quota failed"
- $LFS setquota -u $TSTUSR -b 0 -B 10G -i 0 -I 0 $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B 10G -i 0 -I 0 $DIR ||
+ error "set quota failed"
test_quota_performance $MB
cleanup_quota_test
# test for user
log "User quota (block hardlimit:$LIMIT MB)"
- $LFS setquota -u $TSTUSR -b 0 -B ${LIMIT}M -i 0 -I 0 $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B ${LIMIT}M -i 0 -I 0 $DIR ||
+ error "set user quota failed"
# make sure the system is clean
local USED=$(getquota -u $TSTUSR global curspace)
# test for group
log "--------------------------------------"
log "Group quota (block hardlimit:$LIMIT MB)"
- $LFS setquota -g $TSTUSR -b 0 -B ${LIMIT}M -i 0 -I 0 $DIR
+ $LFS setquota -g $TSTUSR -b 0 -B ${LIMIT}M -i 0 -I 0 $DIR ||
+ error "set group quota failed"
TESTFILE="$DIR/$tdir/$tfile-1"
# make sure the system is clean
[ "$SLOW" = "no" ] && LIMIT=1024 # 1k inodes
+ local FREE_INODES=$(lfs_df -i | grep "summary" | awk '{print $4}')
+ [ $FREE_INODES -lt $LIMIT ] &&
+ skip "not enough free inodes $FREE_INODES required $LIMIT" &&
+ return
+
setup_quota_test
trap cleanup_quota_test EXIT
# test for user
log "User quota (inode hardlimit:$LIMIT files)"
- $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I $LIMIT $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I $LIMIT $DIR ||
+ error "set user quota failed"
# make sure the system is clean
local USED=$(getquota -u $TSTUSR global curinodes)
# test for group
log "--------------------------------------"
log "Group quota (inode hardlimit:$LIMIT files)"
- $LFS setquota -g $TSTUSR -b 0 -B 0 -i 0 -I $LIMIT $DIR
+ $LFS setquota -g $TSTUSR -b 0 -B 0 -i 0 -I $LIMIT $DIR ||
+ error "set group quota failed"
TESTFILE=$DIR/$tdir/$tfile-1
# make sure the system is clean
local USED=$(getquota -u $TSTUSR global curspace)
[ $USED -ne 0 ] && error "Used space($USED) for user $TSTUSR isn't 0."
- $LFS setquota -t -u --block-grace $GRACE --inode-grace $MAX_IQ_TIME $DIR
- $LFS setquota -u $TSTUSR -b ${LIMIT}M -B 0 -i 0 -I 0 $DIR
+ $LFS setquota -t -u --block-grace $GRACE --inode-grace \
+ $MAX_IQ_TIME $DIR || error "set user grace time failed"
+ $LFS setquota -u $TSTUSR -b ${LIMIT}M -B 0 -i 0 -I 0 $DIR ||
+ error "set user quota failed"
test_block_soft $TESTFILE $GRACE $LIMIT
resetquota -u $TSTUSR
USED=$(getquota -g $TSTUSR global curspace)
[ $USED -ne 0 ] && error "Used space($USED) for group $TSTUSR isn't 0."
- $LFS setquota -t -g --block-grace $GRACE --inode-grace $MAX_IQ_TIME $DIR
- $LFS setquota -g $TSTUSR -b ${LIMIT}M -B 0 -i 0 -I 0 $DIR
+ $LFS setquota -t -g --block-grace $GRACE --inode-grace \
+ $MAX_IQ_TIME $DIR || error "set group grace time failed"
+ $LFS setquota -g $TSTUSR -b ${LIMIT}M -B 0 -i 0 -I 0 $DIR ||
+ error "set group quota failed"
test_block_soft $TESTFILE $GRACE $LIMIT
resetquota -g $TSTUSR
# cleanup
$LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace \
- $MAX_IQ_TIME $DIR
+ $MAX_IQ_TIME $DIR || error "restore user grace time failed"
$LFS setquota -t -g --block-grace $MAX_DQ_TIME --inode-grace \
- $MAX_IQ_TIME $DIR
+ $MAX_IQ_TIME $DIR || error "restore group grace time failed"
}
run_test 3 "Block soft limit (start timer, timer goes off, stop timer)"
local USED=$(getquota -u $TSTUSR global curinodes)
[ $USED -ne 0 ] && error "Used space($USED) for user $TSTUSR isn't 0."
- $LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace $GRACE $DIR
- $LFS setquota -u $TSTUSR -b 0 -B 0 -i $LIMIT -I 0 $DIR
+ $LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace \
+ $GRACE $DIR || error "set user grace time failed"
+ $LFS setquota -u $TSTUSR -b 0 -B 0 -i $LIMIT -I 0 $DIR ||
+ error "set user quota failed"
test_file_soft $TESTFILE $LIMIT $GRACE
resetquota -u $TSTUSR
USED=$(getquota -g $TSTUSR global curinodes)
[ $USED -ne 0 ] && error "Used space($USED) for group $TSTUSR isn't 0."
- $LFS setquota -t -g --block-grace $MAX_DQ_TIME --inode-grace $GRACE $DIR
- $LFS setquota -g $TSTUSR -b 0 -B 0 -i $LIMIT -I 0 $DIR
+ $LFS setquota -t -g --block-grace $MAX_DQ_TIME --inode-grace \
+ $GRACE $DIR || error "set group grace time failed"
+ $LFS setquota -g $TSTUSR -b 0 -B 0 -i $LIMIT -I 0 $DIR ||
+ error "set group quota failed"
TESTFILE=$DIR/$tdir/$tfile-1
test_file_soft $TESTFILE $LIMIT $GRACE
# cleanup
$LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace \
- $MAX_IQ_TIME $DIR
+ $MAX_IQ_TIME $DIR || error "restore user grace time failed"
$LFS setquota -t -g --block-grace $MAX_DQ_TIME --inode-grace \
- $MAX_IQ_TIME $DIR
+ $MAX_IQ_TIME $DIR || error "restore group grace time failed"
}
run_test 4a "File soft limit (start timer, timer goes off, stop timer)"
# test of valid grace strings handling
echo "Valid grace strings test"
- $LFS setquota -t -u --block-grace $GR_STR1 --inode-grace $GR_STR2 $DIR
+ $LFS setquota -t -u --block-grace $GR_STR1 --inode-grace \
+ $GR_STR2 $DIR || error "set user grace time failed"
$LFS quota -u -t $DIR | grep "Block grace time: $GR_STR1"
- $LFS setquota -t -g --block-grace $GR_STR3 --inode-grace $GR_STR4 $DIR
+ $LFS setquota -t -g --block-grace $GR_STR3 --inode-grace \
+ $GR_STR4 $DIR || error "set group grace time quota failed"
$LFS quota -g -t $DIR | grep "Inode grace time: $GR_STR4"
# test of invalid grace strings handling
# cleanup
$LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace \
- $MAX_IQ_TIME $DIR
+ $MAX_IQ_TIME $DIR || error "restore user grace time failed"
$LFS setquota -t -g --block-grace $MAX_DQ_TIME --inode-grace \
- $MAX_IQ_TIME $DIR
+ $MAX_IQ_TIME $DIR || error "restore group grace time failed"
}
run_test 4b "Grace time strings handling"
set_ost_qtype "ug" || error "enable ost quota failed"
echo "Set quota limit (0 ${BLIMIT}M 0 $ILIMIT) for $TSTUSR.$TSTUSR"
- $LFS setquota -u $TSTUSR -b 0 -B ${BLIMIT}M -i 0 -I $ILIMIT $DIR
- $LFS setquota -g $TSTUSR -b 0 -B ${BLIMIT}M -i 0 -I $ILIMIT $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B ${BLIMIT}M -i 0 -I $ILIMIT $DIR ||
+ error "set user quota failed"
+ $LFS setquota -g $TSTUSR -b 0 -B ${BLIMIT}M -i 0 -I $ILIMIT $DIR ||
+ error "set group quota failed"
# make sure the system is clean
local USED=$(getquota -u $TSTUSR global curinodes)
chown $TSTUSR2.$TSTUSR2 $TESTFILE2
# cache per-ID lock for $TSTUSR on slave
- $LFS setquota -u $TSTUSR -b 0 -B ${LIMIT}M -i 0 -I 0 $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B ${LIMIT}M -i 0 -I 0 $DIR ||
+ error "set quota failed"
$RUNAS $DD of=$TESTFILE count=1 ||
error "write $TESTFILE failure, expect success"
$RUNAS2 $DD of=$TESTFILE2 count=1 ||
echo "Enable quota & set quota limit for $TSTUSR"
set_ost_qtype "ug" || error "enable ost quota failed"
- $LFS setquota -u $TSTUSR -b 0 -B ${LIMIT}M -i 0 -I 0 $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B ${LIMIT}M -i 0 -I 0 $DIR ||
+ error "set quota failed"
echo "Start ost1..."
start ost1 $(ostdevname 1) $OST_MOUNT_OPTS
+ quota_init
wait_ost_reint "ug" || error "reintegration failed"
$RUNAS $DD of=$TESTFILE count=$((LIMIT + 1)) oflag=sync &&
quota_error u $TSTUSR "write success, but expect EDQUOT"
+ rm -f $TESTFILE
+ wait_delete_completed
+ sync_all_data || true
+ sleep 3
+
+ echo "Stop ost1..."
+ stop ost1
+
+ $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I 0 $DIR ||
+ error "clear quota failed"
+
+ echo "Start ost1..."
+ start ost1 $(ostdevname 1) $OST_MOUNT_OPTS
+ quota_init
+
+ wait_ost_reint "ug" || error "reintegration failed"
+
+ # hardlimit should be cleared on slave during reintegration
+ $RUNAS $DD of=$TESTFILE count=$((LIMIT + 1)) oflag=sync ||
+ quota_error u $TSTUSR "write error, but expect success"
+
cleanup_quota_test
resetquota -u $TSTUSR
}
lustre_fail mds 0xa02
set_ost_qtype "ug" || error "enable ost quota failed"
- $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR ||
+ error "set quota failed"
# ignore the write error
$RUNAS $DD of=$TESTFILE count=1 seek=1 oflag=sync conv=notrunc
echo "Restart ost to trigger reintegration..."
stop ost1
start ost1 $(ostdevname 1) $OST_MOUNT_OPTS
+ quota_init
wait_ost_reint "ug" || error "reintegration failed"
[ $USED -ne 0 ] && error "Used space($USED) for user $TSTUSR isn't 0."
set_ost_qtype "none" || error "disable ost quota failed"
- $LFS setquota -u $TSTUSR -b 0 -B ${LIMIT}M -i 0 -I 0 $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B ${LIMIT}M -i 0 -I 0 $DIR ||
+ error "set quota failed"
# define OBD_FAIL_QUOTA_DELAY_REINT 0xa03
lustre_fail ost 0xa03
- # enable ost quota to trigger reintegration
+ # enable ost quota
set_ost_qtype "ug" || error "enable ost quota failed"
+ # trigger reintegration
+ local procf="osd-$(facet_fstype ost1).$FSNAME-OST*."
+ procf=${procf}quota_slave.force_reint
+ $LCTL set_param $procf=1 || "force reintegration failed"
echo "Stop mds..."
stop mds1
echo "Start mds..."
start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS
+ quota_init
- wait_ost_reint "ug" || error "reintegration failed"
+ # wait longer than usual to make sure the reintegration
+ # is triggered by quota wb thread.
+ wait_ost_reint "ug" 200 || error "reintegration failed"
# hardlimit should have been fetched by slave during global
# reintegration, write will exceed quota
trap cleanup_quota_test EXIT
set_ost_qtype "none" || error "disable ost quota failed"
- $LFS setquota -u $TSTUSR -B ${limit}M $DIR
- $LFS setquota -u $TSTUSR2 -B ${limit}M $DIR
+ $LFS setquota -u $TSTUSR -B ${limit}M $DIR ||
+ error "set quota for $TSTUSR failed"
+ $LFS setquota -u $TSTUSR2 -B ${limit}M $DIR ||
+ error "set quota for $TSTUSR2 failed"
#define OBD_FAIL_OBD_IDX_READ_BREAK 0x608
lustre_fail mds 0x608 0
}
run_test 7d "Quota reintegration (Transfer index in multiple bulks)"
+# quota reintegration (inode limits)
+test_7e() {
+ [ "$MDSCOUNT" -lt "2" ] && skip "Required more MDTs" && return
+
+ local ilimit=$((1024 * 2)) # 2k inodes
+ local TESTFILE=$DIR/${tdir}-1/$tfile
+
+ setup_quota_test
+ trap cleanup_quota_test EXIT
+
+ # make sure the system is clean
+ local USED=$(getquota -u $TSTUSR global curinodes)
+ [ $USED -ne 0 ] && error "Used inode($USED) for user $TSTUSR isn't 0."
+
+ # make sure no granted quota on mdt1
+ set_mdt_qtype "ug" || error "enable mdt quota failed"
+ resetquota -u $TSTUSR
+ set_mdt_qtype "none" || error "disable mdt quota failed"
+
+ local MDTUUID=$(mdtuuid_from_index $((MDSCOUNT - 1)))
+ USED=$(getquota -u $TSTUSR $MDTUUID ihardlimit)
+ [ $USED -ne 0 ] && error "limit($USED) on $MDTUUID for user" \
+ "$TSTUSR isn't 0."
+
+ echo "Stop mds${MDSCOUNT}..."
+ stop mds${MDSCOUNT}
+
+ echo "Enable quota & set quota limit for $TSTUSR"
+ set_mdt_qtype "ug" || error "enable mdt quota failed"
+ $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I $ilimit $DIR ||
+ error "set quota failed"
+
+ echo "Start mds${MDSCOUNT}..."
+ start mds${MDSCOUNT} $(mdsdevname $MDSCOUNT) $MDS_MOUNT_OPTS
+ quota_init
+
+ wait_mdt_reint "ug" || error "reintegration failed"
+
+ echo "create remote dir"
+ $LFS mkdir -i $((MDSCOUNT - 1)) $DIR/${tdir}-1 ||
+ error "create remote dir failed"
+ chmod 0777 $DIR/${tdir}-1
+
+ # hardlimit should have been fetched by slave during global
+ # reintegration, create will exceed quota
+ $RUNAS createmany -m $TESTFILE $((ilimit + 1)) &&
+ quota_error u $TSTUSR "create succeeded, expect EDQUOT"
+
+ $RUNAS unlinkmany $TESTFILE $ilimit || "unlink files failed"
+ wait_delete_completed
+ sync_all_data || true
+
+ echo "Stop mds${MDSCOUNT}..."
+ stop mds${MDSCOUNT}
+
+ $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I 0 $DIR ||
+ error "clear quota failed"
+
+ echo "Start mds${MDSCOUNT}..."
+ start mds${MDSCOUNT} $(mdsdevname $MDSCOUNT) $MDS_MOUNT_OPTS
+ quota_init
+
+ wait_mdt_reint "ug" || error "reintegration failed"
+
+ # hardlimit should be cleared on slave during reintegration
+ $RUNAS createmany -m $TESTFILE $((ilimit + 1)) ||
+ quota_error -u $TSTUSR "create failed, expect success"
+
+ $RUNAS unlinkmany $TESTFILE $((ilimit + 1)) || "unlink failed"
+ $LFS rmdir $DIR/${tdir}-1 || "unlink remote dir failed"
+
+ cleanup_quota_test
+ resetquota -u $TSTUSR
+}
+run_test 7e "Quota reintegration (inode limits)"
+
# run dbench with quota enabled
test_8() {
local BLK_LIMIT="100g" #100G
set_ost_qtype "ug" || error "enable ost quota failed"
echo "Set enough high limit for user: $TSTUSR"
- $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR ||
+ error "set user quota failed"
echo "Set enough high limit for group: $TSTUSR"
- $LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
+ $LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR ||
+ error "set group quota failed"
local duration=""
[ "$SLOW" = "no" ] && duration=" -t 120"
# run for fixing bug10707, it needs a big room. test for 64bit
test_9() {
- local filesize=$((1024 * 1024 * 1024 * 9 / 2)) # 4.5G
+ local filesize=$((1024 * 9 / 2)) # 4.5G
check_whether_skip && return 0
log "Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT)" \
"for user: $TSTUSR"
- $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR ||
+ error "set user quota failed"
log "Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT)" \
"for group: $TSTUSR"
- $LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
+ $LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR ||
+ error "set group quota failed"
quota_show_check a u $TSTUSR
quota_show_check a g $TSTUSR
# root user can overrun quota
set_ost_qtype "ug" || "enable ost quota failed"
- $LFS setquota -u $TSTUSR -b 0 -B 2M -i 0 -I 0 $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B 2M -i 0 -I 0 $DIR ||
+ error "set quota failed"
quota_show_check b u $TSTUSR
$LFS setstripe $TESTFILE -c 1
trap cleanup_quota_test EXIT
set_mdt_qtype "ug" || "enable mdt quota failed"
- $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I 1 $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I 1 $DIR ||
+ error "set quota failed"
touch "$TESTFILE"-0
touch "$TESTFILE"-1
}
run_test 11 "Chown/chgrp ignores quota"
-test_12() {
+test_12a() {
[ "$OSTCOUNT" -lt "2" ] && skip "skipping rebalancing test" && return
local blimit=22 # 22M
set_ost_qtype "u" || "enable ost quota failed"
quota_show_check b u $TSTUSR
- $LFS setquota -u $TSTUSR -b 0 -B "$blimit"M -i 0 -I 0 $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B "$blimit"M -i 0 -I 0 $DIR ||
+ error "set quota failed"
$LFS setstripe $TESTFILE0 -c 1 -i 0
$LFS setstripe $TESTFILE1 -c 1 -i 1
cleanup_quota_test
resetquota -u $TSTUSR
}
-run_test 12 "Block quota rebalancing"
+run_test 12a "Block quota rebalancing"
+
+test_12b() {
+ [ "$MDSCOUNT" -lt "2" ] && skip "skipping rebalancing test" && return
+
+ local ilimit=$((1024 * 2)) # 2k inodes
+ local TESTFILE0=$DIR/$tdir/$tfile
+ local TESTFILE1=$DIR/${tdir}-1/$tfile
+
+ setup_quota_test
+ trap cleanup_quota_test EXIT
+
+ $LFS mkdir -i 1 $DIR/${tdir}-1 || error "create remote dir failed"
+ chmod 0777 $DIR/${tdir}-1
+
+ set_mdt_qtype "u" || "enable mdt quota failed"
+ quota_show_check f u $TSTUSR
+
+ $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I $ilimit $DIR ||
+ error "set quota failed"
+
+ echo "Create $ilimit files on mdt0..."
+ $RUNAS createmany -m $TESTFILE0 $ilimit ||
+ quota_error u $TSTUSR "create failed, but expect success"
+
+ echo "Create files on mdt1..."
+ $RUNAS createmany -m $TESTFILE1 1 &&
+ quota_error a $TSTUSR "create succeeded, expect EDQUOT"
+
+ echo "Free space from mdt0..."
+ $RUNAS unlinkmany $TESTFILE0 $ilimit || error "unlink mdt0 files failed"
+ wait_delete_completed
+ sync_all_data || true
+
+ echo "Create files on mdt1 after space freed from mdt0..."
+ $RUNAS createmany -m $TESTFILE1 $((ilimit / 2)) ||
+ quota_error a $TSTUSR "rebalancing failed"
+
+ $RUNAS unlinkmany $TESTFILE1 $((ilimit / 2)) ||
+ error "unlink mdt1 files failed"
+ $LFS rmdir $DIR/${tdir}-1 || error "unlink remote dir failed"
+
+ cleanup_quota_test
+ resetquota -u $TSTUSR
+}
+run_test 12b "Inode quota rebalancing"
test_13(){
local TESTFILE=$DIR/$tdir/$tfile
- # the name of osp on ost1 name is MDT0000-osp-OST0000
- local procf="ldlm.namespaces.*MDT0000-osp-OST0000.lru_size"
+ # the name of lwp on ost1 name is MDT0000-lwp-OST0000
+ local procf="ldlm.namespaces.*MDT0000-lwp-OST0000.lru_size"
setup_quota_test
trap cleanup_quota_test EXIT
set_ost_qtype "u" || "enable ost quota failed"
quota_show_check b u $TSTUSR
- $LFS setquota -u $TSTUSR -b 0 -B 10M -i 0 -I 0 $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B 10M -i 0 -I 0 $DIR ||
+ error "set quota failed"
$LFS setstripe $TESTFILE -c 1 -i 0
chown $TSTUSR.$TSTUSR $TESTFILE
sync_all_data || true
# test for user
- $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR ||
+ error "set user quota failed"
local TOTAL_LIMIT=$(getquota -u $TSTUSR global bhardlimit)
[ $TOTAL_LIMIT -eq $LIMIT ] ||
error "(user) limit:$TOTAL_LIMIT, expect:$LIMIT, failed!"
resetquota -u $TSTUSR
# test for group
- $LFS setquota -g $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ $LFS setquota -g $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR ||
+ error "set group quota failed"
TOTAL_LIMIT=$(getquota -g $TSTUSR global bhardlimit)
[ $TOTAL_LIMIT -eq $LIMIT ] ||
error "(group) limits:$TOTAL_LIMIT, expect:$LIMIT, failed!"
set_ost_qtype "ug" || error "enable ost quota failed"
# make sure no granted quota on ost
resetquota -u $TSTUSR
- $LFS setquota -u $TSTUSR -b 0 -B 10M -i 0 -I 0 $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B 10M -i 0 -I 0 $DIR ||
+ error "set quota failed"
quota_show_check b u $TSTUSR
set_ost_qtype "u" || error "enable ost quota failed"
log "User quota (limit: $blimit)"
- $LFS setquota -u $TSTUSR -b 0 -B $blimit -i 0 -I 0 $MOUNT
+ $LFS setquota -u $TSTUSR -b 0 -B $blimit -i 0 -I 0 $MOUNT ||
+ error "set quota failed"
quota_show_check b u $TSTUSR
$LFS setstripe $TESTFILE -i 0 -c 1
# check if watchdog is triggered
do_facet ost1 dmesg > $TMP/lustre-log-${TESTNAME}.log
- local watchdog=$(awk '/test 18b/ {start = 1;}
+ local watchdog=$(awk '/sanity-quota test 18/ {start = 1;}
/Service thread pid/ && /was inactive/ {
if (start) {
print;
chown $TSTUSR.$TSTUSR $TESTFILE
echo "Set user quota (limit: "$blimit"M)"
- $LFS setquota -u $TSTUSR -b 0 -B "$blimit"M -i 0 -I 0 $MOUNT
+ $LFS setquota -u $TSTUSR -b 0 -B "$blimit"M -i 0 -I 0 $MOUNT ||
+ error "set user quota failed"
quota_show_check b u $TSTUSR
echo "Update quota limits"
- $LFS setquota -u $TSTUSR -b 0 -B "$blimit"M -i 0 -I 0 $MOUNT
+ $LFS setquota -u $TSTUSR -b 0 -B "$blimit"M -i 0 -I 0 $MOUNT ||
+ error "set group quota failed"
quota_show_check b u $TSTUSR
# first wirte might be cached
set_ost_qtype "ug" || error "Enable ost quota failed"
log "Set limit(block:${BLIMIT}G; file:$ILIMIT) for user: $TSTUSR"
- $LFS setquota -u $TSTUSR -b 0 -B ${BLIMIT}G -i 0 -I $ILIMIT $MOUNT
+ $LFS setquota -u $TSTUSR -b 0 -B ${BLIMIT}G -i 0 -I $ILIMIT $MOUNT ||
+ error "set user quota failed"
log "Set limit(block:${BLIMIT}G; file:$ILIMIT) for group: $TSTUSR"
- $LFS setquota -g $TSTUSR -b 0 -B $BLIMIT -i 0 -I $ILIMIT $MOUNT
+ $LFS setquota -g $TSTUSR -b 0 -B $BLIMIT -i 0 -I $ILIMIT $MOUNT ||
+ error "set group quota failed"
# repeat writing on a 1M file
test_21_sub ${TESTFILE}_1 1 30 &
stopall
mount
setupall
+ quota_init
echo "Verify if quota is disabled"
qtype=$(mdt_quota_type)
qtype=$(ost_quota_type)
[ $qtype != "none" ] && error "ost quota setting is lost"
- quota_init
+ return 0
}
run_test 22 "enable/disable quota by 'lctl conf_param'"
# test for user
log "User quota (limit: $LIMIT MB)"
- $LFS setquota -u $TSTUSR -b 0 -B "$LIMIT"M -i 0 -I 0 $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B "$LIMIT"M -i 0 -I 0 $DIR ||
+ error "set quota failed"
quota_show_check b u $TSTUSR
$LFS setstripe $TESTFILE -c 1 -i 0
chown $TSTUSR.$TSTUSR $TESTFILE
echo "Set user quota (limit: "$blimit"M)"
- $LFS setquota -u $TSTUSR -b 0 -B "$blimit"M -i 0 -I 0 $MOUNT
+ $LFS setquota -u $TSTUSR -b 0 -B "$blimit"M -i 0 -I 0 $MOUNT ||
+ error "set quota failed"
# overrun quota by root user
runas -u 0 -g 0 $DD of=$TESTFILE count=$((blimit + 1)) ||
$LFS setstripe $TESTFILE -i 0 -c 1
chown $TSTUSR.$TSTUSR $TESTFILE
- $LFS setquota -t -u --block-grace $GRACE --inode-grace $MAX_IQ_TIME $DIR
- $LFS setquota -u $TSTUSR -b ${LIMIT}M -B 0 -i 0 -I 0 $DIR
+ $LFS setquota -t -u --block-grace $GRACE --inode-grace \
+ $MAX_IQ_TIME $DIR || error "set grace time failed"
+ $LFS setquota -u $TSTUSR -b ${LIMIT}M -B 0 -i 0 -I 0 $DIR ||
+ error "set quota failed"
$RUNAS $DD of=$TESTFILE count=$((LIMIT * 2)) || true
cancel_lru_locks osc
sleep $GRACE
- $LFS setquota -u $TSTUSR -B 0 $DIR
+ $LFS setquota -u $TSTUSR -B 0 $DIR || error "clear quota failed"
# over-quota flag has not yet settled since we do not trigger async
# events based on grace time period expiration
$SHOW_QUOTA_USER
cleanup_quota_test
resetquota -u $TSTUSR
$LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace \
- $MAX_IQ_TIME $DIR
+ $MAX_IQ_TIME $DIR || error "restore grace time failed"
}
run_test 30 "Hard limit updates should not reset grace times"
git://git.whamcloud.com / fs / lustre-release.git / blobdiff