b=22668 test_67b fix for ostcount > 10

[fs/lustre-release.git] / lustre / tests / replay-single.sh

diff --git a/lustre/tests/replay-single.sh b/lustre/tests/replay-single.sh
index ddba13d..be6427b 100755 (executable)
--- a/lustre/tests/replay-single.sh
+++ b/lustre/tests/replay-single.sh
@@ -13,14 +13,15 @@ CLEANUP=${CLEANUP:-}
 . $LUSTRE/tests/test-framework.sh
 init_test_env $@
 . ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
+init_logging
 CHECK_GRANT=${CHECK_GRANT:-"yes"}
 GRANT_CHECK_LIST=${GRANT_CHECK_LIST:-""}
 
-remote_mds_nodsh && log "SKIP: remote MDS with nodsh" && exit 0
+require_dsh_mds || exit 0
 
 # Skip these tests
-# bug number:  17466 18857,15962 21240
-ALWAYS_EXCEPT="61d   33a 33b     44 $REPLAY_SINGLE_EXCEPT"
+# bug number:  17466 18857
+ALWAYS_EXCEPT="61d   33a 33b     $REPLAY_SINGLE_EXCEPT"
 
 if [ "$FAILURE_MODE" = "HARD" ] && mixed_ost_devs; then
     CONFIG_EXCEPTIONS="0b 42 47 61a 61c"
@@ -717,30 +718,30 @@ test_32() {
 }
 run_test 32 "close() notices client eviction; close() after client eviction"
 
-# Abort recovery before client complete
-test_33a() {   # was test_33
-    replay_barrier $SINGLEMDS
-    createmany -o $DIR/$tfile-%d 100
+test_33a() {
+    createmany -o $DIR/$tfile-%d 10
+    replay_barrier_nosync $SINGLEMDS
     fail_abort $SINGLEMDS
-    # this file should be gone, because the replay was aborted
-    $CHECKSTAT -t file $DIR/$tfile-* && return 3
-    unlinkmany $DIR/$tfile-%d 0 100
+    # recreate shouldn't fail
+    createmany -o $DIR/$tfile--%d 10 || return 1
+    rm $DIR/$tfile-* -f
     return 0
 }
-run_test 33a "abort recovery before client does replay"
+run_test 33a "fid seq shouldn't be reused after abort recovery"
+
+test_33b() {
+    #define OBD_FAIL_SEQ_ALLOC                          0x1311
+    do_facet $SINGLEMDS "lctl set_param fail_loc=0x1311"
 
-# Stale FID sequence bug 15962
-test_33b() {   # was test_33a
-    replay_barrier $SINGLEMDS
     createmany -o $DIR/$tfile-%d 10
+    replay_barrier_nosync $SINGLEMDS
     fail_abort $SINGLEMDS
-    unlinkmany $DIR/$tfile-%d 0 10
     # recreate shouldn't fail
-    createmany -o $DIR/$tfile-%d 10 || return 3
-    unlinkmany $DIR/$tfile-%d 0 10
+    createmany -o $DIR/$tfile--%d 10 || return 1
+    rm $DIR/$tfile-* -f
     return 0
 }
-run_test 33b "fid shouldn't be reused after abort recovery"
+run_test 33b "test fid seq allocation"
 
 test_34() {
     multiop_bg_pause $DIR/$tfile O_c || return 2
@@ -936,7 +937,7 @@ test_43() { # bug 2530
 }
 run_test 43 "mds osc import failure during recovery; don't LBUG"
 
-test_44a() {   # was test_44
+test_44a() { # was test_44
     local at_max_saved=0
 
     mdcdev=`lctl get_param -n devices | awk '/MDT0000-mdc-/ {print $1}'`
@@ -950,12 +951,13 @@ test_44a() {      # was test_44
     fi
 
     for i in `seq 1 10`; do
-       echo "$i of 10 ($(date +%s))"
-       do_facet $SINGLEMDS "lctl get_param -n mdt.*.mdt.timeouts | grep service"
-       #define OBD_FAIL_TGT_CONN_RACE     0x701
-       do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000701"
-       $LCTL --device $mdcdev recover || return 4
-       df $MOUNT
+        echo "$i of 10 ($(date +%s))"
+        do_facet $SINGLEMDS "lctl get_param -n mdt.*.mdt.timeouts | grep service"
+        #define OBD_FAIL_TGT_CONN_RACE     0x701
+        do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000701"
+        # lctl below may fail, it is valid case
+        $LCTL --device $mdcdev recover
+        df $MOUNT
     done
     do_facet $SINGLEMDS "lctl set_param fail_loc=0"
     [ $at_max_saved -ne 0 ] && at_max_set $at_max_saved mds
@@ -970,11 +972,12 @@ test_44b() {
 
     for i in `seq 1 10`; do
         echo "$i of 10 ($(date +%s))"
-       do_facet $SINGLEMDS "lctl get_param -n mdt.*.mdt.timeouts | grep service"
-       #define OBD_FAIL_TGT_DELAY_RECONNECT 0x704
-       do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000704"
-       $LCTL --device $mdcdev recover || return 4
-       df $MOUNT
+        do_facet $SINGLEMDS "lctl get_param -n mdt.*.mdt.timeouts | grep service"
+        #define OBD_FAIL_TGT_DELAY_RECONNECT 0x704
+        do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000704"
+        # lctl below may fail, it is valid case
+        $LCTL --device $mdcdev recover
+        df $MOUNT
     done
     do_facet $SINGLEMDS "lctl set_param fail_loc=0"
     return 0
@@ -1089,6 +1092,7 @@ run_test 52 "time out lock replay (3764)"
 
 # bug 3462 - simultaneous MDC requests
 test_53a() {
+        cancel_lru_locks mdc    # cleanup locks from former test cases
         mkdir -p $DIR/${tdir}-1
         mkdir -p $DIR/${tdir}-2
         multiop $DIR/${tdir}-1/f O_c &
@@ -1118,6 +1122,7 @@ test_53a() {
 run_test 53a "|X| close request while two MDC requests in flight"
 
 test_53b() {
+        cancel_lru_locks mdc    # cleanup locks from former test cases
         rm -rf $DIR/${tdir}-1 $DIR/${tdir}-2
 
         mkdir -p $DIR/${tdir}-1
@@ -1149,6 +1154,7 @@ test_53b() {
 run_test 53b "|X| open request while two MDC requests in flight"
 
 test_53c() {
+        cancel_lru_locks mdc    # cleanup locks from former test cases
         rm -rf $DIR/${tdir}-1 $DIR/${tdir}-2
 
         mkdir -p $DIR/${tdir}-1
@@ -1167,6 +1173,9 @@ test_53c() {
         kill -USR1 $close_pid
         cancel_lru_locks mdc    # force the close
 
+        #bz20647: make sure all pids are exists before failover
+        [ -d /proc/$close_pid ] || error "close_pid doesn't exist"
+        [ -d /proc/$open_pid ] || error "open_pid doesn't exists"
         replay_barrier_nodf $SINGLEMDS
         fail_nodf $SINGLEMDS
         wait $open_pid || return 1
@@ -1182,6 +1191,7 @@ test_53c() {
 run_test 53c "|X| open request and close request while two MDC requests in flight"
 
 test_53d() {
+        cancel_lru_locks mdc    # cleanup locks from former test cases
         rm -rf $DIR/${tdir}-1 $DIR/${tdir}-2
 
         mkdir -p $DIR/${tdir}-1
@@ -1210,6 +1220,7 @@ test_53d() {
 run_test 53d "|X| close reply while two MDC requests in flight"
 
 test_53e() {
+        cancel_lru_locks mdc    # cleanup locks from former test cases
         rm -rf $DIR/${tdir}-1 $DIR/${tdir}-2
 
         mkdir -p $DIR/${tdir}-1
@@ -1241,6 +1252,7 @@ test_53e() {
 run_test 53e "|X| open reply while two MDC requests in flight"
 
 test_53f() {
+        cancel_lru_locks mdc    # cleanup locks from former test cases
         rm -rf $DIR/${tdir}-1 $DIR/${tdir}-2
 
         mkdir -p $DIR/${tdir}-1
@@ -1259,6 +1271,9 @@ test_53f() {
         kill -USR1 $close_pid
         cancel_lru_locks mdc    # force the close
 
+        #bz20647: make sure all pids are exists before failover
+        [ -d /proc/$close_pid ] || error "close_pid doesn't exist"
+        [ -d /proc/$open_pid ] || error "open_pid doesn't exists"
         replay_barrier_nodf $SINGLEMDS
         fail_nodf $SINGLEMDS
         wait $open_pid || return 1
@@ -1274,6 +1289,7 @@ test_53f() {
 run_test 53f "|X| open reply and close reply while two MDC requests in flight"
 
 test_53g() {
+        cancel_lru_locks mdc    # cleanup locks from former test cases
         rm -rf $DIR/${tdir}-1 $DIR/${tdir}-2
 
         mkdir -p $DIR/${tdir}-1
@@ -1291,8 +1307,11 @@ test_53g() {
         do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000115"
         kill -USR1 $close_pid
         cancel_lru_locks mdc    # force the close
-
         do_facet $SINGLEMDS "lctl set_param fail_loc=0"
+
+        #bz20647: make sure all pids are exists before failover
+        [ -d /proc/$close_pid ] || error "close_pid doesn't exist"
+        [ -d /proc/$open_pid ] || error "open_pid doesn't exists"
         replay_barrier_nodf $SINGLEMDS
         fail_nodf $SINGLEMDS
         wait $open_pid || return 1
@@ -1307,6 +1326,7 @@ test_53g() {
 run_test 53g "|X| drop open reply and close request while close and open are both in flight"
 
 test_53h() {
+        cancel_lru_locks mdc    # cleanup locks from former test cases
         rm -rf $DIR/${tdir}-1 $DIR/${tdir}-2
 
         mkdir -p $DIR/${tdir}-1
@@ -1326,6 +1346,9 @@ test_53h() {
         cancel_lru_locks mdc    # force the close
         sleep 1
 
+        #bz20647: make sure all pids are exists before failover
+        [ -d /proc/$close_pid ] || error "close_pid doesn't exist"
+        [ -d /proc/$open_pid ] || error "open_pid doesn't exists"
         replay_barrier_nodf $SINGLEMDS
         fail_nodf $SINGLEMDS
         wait $open_pid || return 1
@@ -1731,7 +1754,7 @@ test_67b() #bug 3055
     CONN1=$(lctl get_param -n osc.*.stats | awk '/_connect/ {total+=$2} END {print total}')
 
     # exhaust precreations on ost1
-    local OST=$(lfs osts | grep 0": " | awk '{print $2}' | sed -e 's/_UUID$//')
+    local OST=$(lfs osts | grep ^0": " | awk '{print $2}' | sed -e 's/_UUID$//')
     local mdtosc=$(get_mdtosc_proc_path $OST)
     local last_id=$(do_facet mds lctl get_param -n osc.$mdtosc.prealloc_last_id)
     local next_id=$(do_facet mds lctl get_param -n osc.$mdtosc.prealloc_next_id)
@@ -1839,7 +1862,7 @@ test_70b () {
        [ "$SLOW" = "no" ] && duration=60
        local cmd="rundbench 1 -t $duration"
        local PID=""
-       do_nodes --verbose $clients "set -x; MISSING_DBENCH_OK=$MISSING_DBENCH_OK \
+       do_nodesv $clients "set -x; MISSING_DBENCH_OK=$MISSING_DBENCH_OK \
                PATH=:$PATH:$LUSTRE/utils:$LUSTRE/tests/:$DBENCH_LIB \
                DBENCH_LIB=$DBENCH_LIB TESTSUITE=$TESTSUITE TESTNAME=$TESTNAME \
                LCTL=$LCTL $cmd" &
@@ -2017,8 +2040,8 @@ test_83b() {
 run_test 83b "fail log_add during unlink recovery"
 
 test_84a() {
-#define OBD_FAIL_MDS_OPEN_WAIT_CREATE  0x143
-    do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000143"
+#define OBD_FAIL_MDS_OPEN_WAIT_CREATE  0x144
+    do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000144"
     createmany -o $DIR/$tfile- 1 &
     PID=$!
     mds_evict_client
@@ -2027,6 +2050,26 @@ test_84a() {
 }
 run_test 84a "stale open during export disconnect"
 
+test_85() { # bug 22190
+    local fail=0
+    do_facet ost1 "lctl set_param -n obdfilter.${ost1_svc}.sync_journal 1"
+
+    replay_barrier ost1
+    lfs setstripe -i 0 -c 1 $DIR/$tfile
+    dd oflag=dsync if=/dev/urandom of=$DIR/$tfile bs=4k count=100 || fail=1
+    fail_abort ost1
+    echo "FAIL $fail"
+    [ $fail -ne 0 ] || error "Write was successful"
+}
+run_test 85 "ensure there is no reply on bulk write if obd is in rdonly mode"
+
+test_86() {
+        umount $MOUNT
+        do_facet $SINGLEMDS lctl set_param mdt.${FSNAME}-MDT*.exports.clear=0
+        remount_facet $SINGLEMDS
+}
+run_test 86 "umount server after clear nid_stats should not hit LBUG"
+
 equals_msg `basename $0`: test complete, cleaning up
 check_and_cleanup_lustre
 [ -f "$TESTSUITELOG" ] && cat $TESTSUITELOG && grep -q FAIL $TESTSUITELOG && exit 1 || true