b=22334 swap the declarations for OBD_FAIL_MDS_READLINK_EPROTO and OBD_FAIL_MDS_OPEN_...

[fs/lustre-release.git] / lustre / tests / replay-single.sh

diff --git a/lustre/tests/replay-single.sh b/lustre/tests/replay-single.sh
index acc4454..4b0f5c0 100755 (executable)
--- a/lustre/tests/replay-single.sh
+++ b/lustre/tests/replay-single.sh
@@ -13,14 +13,15 @@ CLEANUP=${CLEANUP:-}
 . $LUSTRE/tests/test-framework.sh
 init_test_env $@
 . ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
+init_logging
 CHECK_GRANT=${CHECK_GRANT:-"yes"}
 GRANT_CHECK_LIST=${GRANT_CHECK_LIST:-""}
 
-remote_mds_nodsh && log "SKIP: remote MDS with nodsh" && exit 0
+require_dsh_mds || exit 0
 
 # Skip these tests
-# bug number:  17466 18857,15962
-ALWAYS_EXCEPT="61d   33a 33b  $REPLAY_SINGLE_EXCEPT"
+# bug number:  17466 18857
+ALWAYS_EXCEPT="61d   33a 33b     $REPLAY_SINGLE_EXCEPT"
 
 if [ "$FAILURE_MODE" = "HARD" ] && mixed_ost_devs; then
     CONFIG_EXCEPTIONS="0b 42 47 61a 61c"
@@ -936,7 +937,7 @@ test_43() { # bug 2530
 }
 run_test 43 "mds osc import failure during recovery; don't LBUG"
 
-test_44a() {   # was test_44
+test_44a() { # was test_44
     local at_max_saved=0
 
     mdcdev=`lctl get_param -n devices | awk '/MDT0000-mdc-/ {print $1}'`
@@ -950,12 +951,13 @@ test_44a() {      # was test_44
     fi
 
     for i in `seq 1 10`; do
-       echo "$i of 10 ($(date +%s))"
-       do_facet $SINGLEMDS "lctl get_param -n mdt.*.mdt.timeouts | grep service"
-       #define OBD_FAIL_TGT_CONN_RACE     0x701
-       do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000701"
-       $LCTL --device $mdcdev recover || return 4
-       df $MOUNT
+        echo "$i of 10 ($(date +%s))"
+        do_facet $SINGLEMDS "lctl get_param -n mdt.*.mdt.timeouts | grep service"
+        #define OBD_FAIL_TGT_CONN_RACE     0x701
+        do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000701"
+        # lctl below may fail, it is valid case
+        $LCTL --device $mdcdev recover
+        df $MOUNT
     done
     do_facet $SINGLEMDS "lctl set_param fail_loc=0"
     [ $at_max_saved -ne 0 ] && at_max_set $at_max_saved mds
@@ -970,11 +972,12 @@ test_44b() {
 
     for i in `seq 1 10`; do
         echo "$i of 10 ($(date +%s))"
-       do_facet $SINGLEMDS "lctl get_param -n mdt.*.mdt.timeouts | grep service"
-       #define OBD_FAIL_TGT_DELAY_RECONNECT 0x704
-       do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000704"
-       $LCTL --device $mdcdev recover || return 4
-       df $MOUNT
+        do_facet $SINGLEMDS "lctl get_param -n mdt.*.mdt.timeouts | grep service"
+        #define OBD_FAIL_TGT_DELAY_RECONNECT 0x704
+        do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000704"
+        # lctl below may fail, it is valid case
+        $LCTL --device $mdcdev recover
+        df $MOUNT
     done
     do_facet $SINGLEMDS "lctl set_param fail_loc=0"
     return 0
@@ -1182,6 +1185,7 @@ test_53c() {
 run_test 53c "|X| open request and close request while two MDC requests in flight"
 
 test_53d() {
+        cancel_lru_locks mdc    # cleanup locks from former test cases
         rm -rf $DIR/${tdir}-1 $DIR/${tdir}-2
 
         mkdir -p $DIR/${tdir}-1
@@ -1729,10 +1733,21 @@ test_67b() #bug 3055
 
     at_start || return 0
     CONN1=$(lctl get_param -n osc.*.stats | awk '/_connect/ {total+=$2} END {print total}')
+
+    # exhaust precreations on ost1
+    local OST=$(lfs osts | grep 0": " | awk '{print $2}' | sed -e 's/_UUID$//')
+    local mdtosc=$(get_mdtosc_proc_path $OST)
+    local last_id=$(do_facet mds lctl get_param -n osc.$mdtosc.prealloc_last_id)
+    local next_id=$(do_facet mds lctl get_param -n osc.$mdtosc.prealloc_next_id)
+
+    mkdir -p $DIR/$tdir/${OST}
+    lfs setstripe $DIR/$tdir/${OST} -o 0 -c 1 || error "setstripe"
+    echo "Creating to objid $last_id on ost $OST..."
 #define OBD_FAIL_OST_PAUSE_CREATE        0x223
     do_facet ost1 "sysctl -w lustre.fail_val=20000"
     do_facet ost1 "sysctl -w lustre.fail_loc=0x80000223"
-    cp /etc/profile $DIR/$tfile || error "cp failed"
+    createmany -o $DIR/$tdir/${OST}/f $next_id $((last_id - next_id + 2))
+
     client_reconnect
     do_facet ost1 "lctl get_param -n ost.OSS.ost_create.timeouts"
     log "phase 2"
@@ -1828,7 +1843,7 @@ test_70b () {
        [ "$SLOW" = "no" ] && duration=60
        local cmd="rundbench 1 -t $duration"
        local PID=""
-       do_nodes --verbose $clients "set -x; MISSING_DBENCH_OK=$MISSING_DBENCH_OK \
+       do_nodesv $clients "set -x; MISSING_DBENCH_OK=$MISSING_DBENCH_OK \
                PATH=:$PATH:$LUSTRE/utils:$LUSTRE/tests/:$DBENCH_LIB \
                DBENCH_LIB=$DBENCH_LIB TESTSUITE=$TESTSUITE TESTNAME=$TESTNAME \
                LCTL=$LCTL $cmd" &
@@ -2006,8 +2021,8 @@ test_83b() {
 run_test 83b "fail log_add during unlink recovery"
 
 test_84a() {
-#define OBD_FAIL_MDS_OPEN_WAIT_CREATE  0x143
-    do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000143"
+#define OBD_FAIL_MDS_OPEN_WAIT_CREATE  0x144
+    do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000144"
     createmany -o $DIR/$tfile- 1 &
     PID=$!
     mds_evict_client