# Skip these tests
# bug number for skipped tests:
-# LU-472
-ALWAYS_EXCEPT="$REPLAY_SINGLE_EXCEPT 61d"
+ALWAYS_EXCEPT="$REPLAY_SINGLE_EXCEPT "
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
-# 7.5 (min)"
+# time in minutes: 7.5"
[ "$SLOW" = "no" ] && EXCEPT_SLOW="44b"
-[ $(facet_fstype $SINGLEMDS) = "zfs" ] &&
-# bug number for skipped test: LU-1867 LU-3127
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 89 73b"
+if [ $(facet_fstype $SINGLEMDS) = "zfs" ]; then
+# bug number for skipped test: LU-11388
+ ALWAYS_EXCEPT+="131b"
+ if [ $MDSCOUNT -gt 1 ]; then
+# bug number for skipped test: LU-10740 LU-11330 LU-9157 LU-11336
+ ALWAYS_EXCEPT+=" 2d 70d 80c 80d"
+ fi
+fi
build_test_filter
}
run_test 2b "touch"
+test_2c() {
+ replay_barrier $SINGLEMDS
+ $LFS setstripe -c $OSTCOUNT $DIR/$tfile
+ fail $SINGLEMDS
+ $CHECKSTAT -t file $DIR/$tfile ||
+ error "$CHECKSTAT $DIR/$tfile check failed"
+}
+run_test 2c "setstripe replay"
+
+test_2d() {
+ replay_barrier $SINGLEMDS
+ $LFS setdirstripe -i 0 -c $MDSCOUNT $DIR/$tdir
+ fail $SINGLEMDS
+ $CHECKSTAT -t dir $DIR/$tdir ||
+ error "$CHECKSTAT $DIR/$tdir check failed"
+}
+run_test 2d "setdirstripe replay"
+
test_3a() {
local file=$DIR/$tfile
replay_barrier $SINGLEMDS
test_20b() { # bug 10480
local wait_timeout=$((TIMEOUT * 4))
- local BEFOREUSED
- local AFTERUSED
+ local extra=$(fs_log_size)
+ local n_attempts=1
+
+ sync_all_data
+ $LFS setstripe -i 0 -c 1 $DIR
+
+ local beforeused=$(df -P $DIR | tail -1 | awk '{ print $3 }')
- BEFOREUSED=$(df -P $DIR | tail -1 | awk '{ print $3 }')
dd if=/dev/zero of=$DIR/$tfile bs=4k count=10000 &
while [ ! -e $DIR/$tfile ] ; do
- usleep 60 # give dd a chance to start
+ usleep 60 # give dd a chance to start
done
- $GETSTRIPE $DIR/$tfile || error "$GETSTRIPE $DIR/$tfile failed"
+ $LFS getstripe $DIR/$tfile || error "$LFS getstripe $DIR/$tfile failed"
# make it an orphan
rm -f $DIR/$tfile || error "rm -f $DIR/$tfile failed"
mds_evict_client
- client_up || client_up || true # reconnect
+ client_up || client_up || true # reconnect
- do_facet $SINGLEMDS "lctl set_param -n osd*.*MDT*.force_sync 1"
+ do_facet $SINGLEMDS "lctl set_param -n osd*.*MDT*.force_sync=1"
- fail $SINGLEMDS # start orphan recovery
+ fail $SINGLEMDS # start orphan recovery
wait_recovery_complete $SINGLEMDS || error "MDS recovery not done"
- wait_delete_completed_mds $wait_timeout ||
- error "delete did not complete"
+ wait_delete_completed $wait_timeout || error "delete did not finish"
+ sync_all_data
- AFTERUSED=$(df -P $DIR | tail -1 | awk '{ print $3 }')
- log "before $BEFOREUSED, after $AFTERUSED"
- (( $AFTERUSED > $BEFOREUSED + $(fs_log_size) )) &&
- error "after $AFTERUSED > before $BEFOREUSED"
- return 0
+ while true; do
+ local afterused=$(df -P $DIR | tail -1 | awk '{ print $3 }')
+ log "before $beforeused, after $afterused"
+
+ (( $beforeused + $extra >= $afterused )) && break
+ n_attempts=$((n_attempts + 1))
+ [ $n_attempts -gt 3 ] &&
+ error "after $afterused > before $beforeused + $extra"
+
+ wait_zfs_commit $SINGLEMDS 5
+ sync_all_data
+ done
}
-run_test 20b "write, unlink, eviction, replay, (test mds_cleanup_orphans)"
+
+run_test 20b "write, unlink, eviction, replay (test mds_cleanup_orphans)"
test_20c() { # bug 10480
multiop_bg_pause $DIR/$tfile Ow_c ||
# the page, guarnateeing that the unlock from the RPC completion would
# assert on trying to unlock the unlocked page.
test_41() {
- [ $OSTCOUNT -lt 2 ] &&
- skip_env "skipping test 41: we don't have a second OST to test with" &&
- return
+ [ $OSTCOUNT -lt 2 ] && skip_env "needs >= 2 OSTs" && return
local f=$MOUNT/$tfile
# make sure the start of the file is ost1
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000701"
# lctl below may fail, it is valid case
$LCTL --device $mdcdev recover
- df $MOUNT
+ $LFS df $MOUNT
done
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
[ $at_max_saved -ne 0 ] && at_max_set $at_max_saved mds
test_48() {
remote_ost_nodsh && skip "remote OST with nodsh" && return 0
- [ "$OSTCOUNT" -lt "2" ] &&
- skip_env "$OSTCOUNT < 2 OSTs -- skipping" && return
+ [ "$OSTCOUNT" -lt "2" ] && skip_env "needs >= 2 OSTs" && return
replay_barrier $SINGLEMDS
createmany -o $DIR/$tfile 20 ||
do_facet ost1 "lctl set_param fail_loc=0x80000216"
client_up || error "client_up failed"
+ # let the MDS discover the OST failure, attempt to recover, fail
+ # and recover again.
+ sleep $((3 * TIMEOUT))
+
createmany -o $DIR/$tfile 20 20 ||
error "createmany recraete $DIR/$tfile failed"
unlinkmany $DIR/$tfile 40 || error "unlinkmany $DIR/$tfile failed"
$LCTL set_param fail_val=$(($ORIG + 5))
#define OBD_FAIL_PTLRPC_PAUSE_REP 0x50c
$LCTL set_param fail_loc=0x50c
- ls $DIR/$tfile > /dev/null 2>&1
+ touch $DIR/$tfile > /dev/null 2>&1
$LCTL set_param fail_loc=0
CUR=$(lctl get_param -n mdc.${FSNAME}-MDT0000*.timeouts |
awk '/network/ {print $4}')
}
rm -rf $DIR/$tdir/test || {
echo "rmdir fails"
+ ls -lR $DIR/$tdir
break
}
rm -rf $DIR/$tdir/test1 || {
echo "rmdir fails"
+ ls -lR $DIR/$tdir/test1
break
}
done
}
run_test 70d "mkdir/rmdir striped dir ${MDSCOUNT}mdts recovery"
-cleanup_70e() {
- trap 0
- kill -9 $rename_70e_pid
-}
-
test_70e () {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
local clients=${CLIENTS:-$HOSTNAME}
local rc=0
- echo ha > /proc/sys/lnet/debug
+ lctl set_param debug=+ha
zconf_mount_clients $clients $MOUNT
local duration=300
$LFS mkdir -i0 $DIR/$tdir/test_1
touch $DIR/$tdir/test_0/a
touch $DIR/$tdir/test_1/b
- trap cleanup_70e EXIT
(
- while true; do
- mrename $DIR/$tdir/test_0/a $DIR/$tdir/test_1/b > \
- /dev/null || {
- echo "a->b fails"
- break;
- }
+ while true; do
+ mrename $DIR/$tdir/test_0/a $DIR/$tdir/test_1/b > /dev/null || {
+ echo "a->b fails"
+ break;
+ }
- checkstat $DIR/$tdir/test_0/a && {
- echo "a still exists"
- break
- }
+ checkstat $DIR/$tdir/test_0/a && {
+ echo "a still exists"
+ break
+ }
- checkstat $DIR/$tdir/test_1/b || {
- echo "b still exists"
- break
- }
+ checkstat $DIR/$tdir/test_1/b || {
+ echo "b still exists"
+ break
+ }
- touch $DIR/$tdir/test_0/a || {
- echo "touch a fails"
- break
- }
+ touch $DIR/$tdir/test_0/a || {
+ echo "touch a fails"
+ break
+ }
- mrename $DIR/$tdir/test_1/b $DIR/$tdir/test_0/a > \
- /dev/null || {
- echo "a->a fails"
- break;
- }
- done
+ mrename $DIR/$tdir/test_1/b $DIR/$tdir/test_0/a > /dev/null || {
+ echo "a->a fails"
+ break;
+ }
+ done
)&
rename_70e_pid=$!
- echo "Started $rename_70e_pid"
+ stack_trap "kill -9 $rename_70e_pid" EXIT
+ echo "Started PID=$rename_70e_pid"
random_fail_mdt 2 $duration $rename_70e_pid
kill -0 $rename_70e_pid || error "rename $rename_70e_pid stopped"
-
- cleanup_70e
- true
}
run_test 70e "rename cross-MDT with random fails"
run_test 74 "Ensure applications don't fail waiting for OST recovery"
remote_dir_check_80() {
- local MDTIDX=1
+ local mdtidx=1
local diridx
local fileidx
- diridx=$($GETSTRIPE -M $remote_dir) ||
- error "$GETSTRIPE -M $remote_dir failed"
- [ $diridx -eq $MDTIDX ] || error "$diridx != $MDTIDX"
+ diridx=$($LFS getstripe -m $remote_dir) ||
+ error "$LFS getstripe -m $remote_dir failed"
+ [ $diridx -eq $mdtidx ] || error "$diridx != $mdtidx"
createmany -o $remote_dir/f-%d 20 || error "creation failed"
- fileidx=$($GETSTRIPE -M $remote_dir/f-1) ||
- error "$GETSTRIPE -M $remote_dir/f-1 failed"
- [ $fileidx -eq $MDTIDX ] || error "$fileidx != $MDTIDX"
+ fileidx=$($LFS getstripe -m $remote_dir/f-1) ||
+ error "$LFS getstripe -m $remote_dir/f-1 failed"
+ [ $fileidx -eq $mdtidx ] || error "$fileidx != $mdtidx"
return 0
}
local remote_dir=$DIR/$tdir/remote_dir
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
- #define OBD_FAIL_UPDATE_OBJ_NET_REP 0x1701
+ #define OBD_FAIL_OUT_UPDATE_NET_REP 0x1701
do_facet mds${MDTIDX} lctl set_param fail_loc=0x1701
$LFS mkdir -i $MDTIDX $remote_dir &
local CLIENT_PID=$!
local remote_dir=$DIR/$tdir/remote_dir
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
- #define OBD_FAIL_UPDATE_OBJ_NET_REP 0x1701
+ #define OBD_FAIL_OUT_UPDATE_NET_REP 0x1701
do_facet mds${MDTIDX} lctl set_param fail_loc=0x1701
$LFS mkdir -i $MDTIDX $remote_dir &
local CLIENT_PID=$!
local remote_dir=$DIR/$tdir/remote_dir
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
- #define OBD_FAIL_UPDATE_OBJ_NET_REP 0x1701
+ #define OBD_FAIL_OUT_UPDATE_NET_REP 0x1701
do_facet mds${MDTIDX} lctl set_param fail_loc=0x1701
$LFS mkdir -i $MDTIDX $remote_dir &
local CLIENT_PID=$!
$LFS mkdir -i $MDTIDX $remote_dir || error "lfs mkdir failed"
touch $remote_dir || error "touch $remote_dir failed"
- # OBD_FAIL_OBJ_UPDATE_NET_REP 0x1701
+ # OBD_FAIL_OUT_UPDATE_NET_REP 0x1701
do_facet mds${MDTIDX} lctl set_param fail_loc=0x1701
rmdir $remote_dir &
local CLIENT_PID=$!
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
$LFS mkdir -i $MDTIDX $remote_dir || error "lfs mkdir failed"
- # OBD_FAIL_OBJ_UPDATE_NET_REP 0x1701
+ # OBD_FAIL_OUT_UPDATE_NET_REP 0x1701
do_facet mds${MDTIDX} lctl set_param fail_loc=0x1701
rmdir $remote_dir &
local CLIENT_PID=$!
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
$LFS mkdir -i $MDTIDX $remote_dir || error "lfs mkdir failed"
- # OBD_FAIL_OBJ_UPDATE_NET_REP 0x1701
+ # OBD_FAIL_OUT_UPDATE_NET_REP 0x1701
do_facet mds${MDTIDX} lctl set_param fail_loc=0x1701
rmdir $remote_dir &
local CLIENT_PID=$!
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
$LFS mkdir -i $MDTIDX $remote_dir || error "lfs mkdir failed"
- # OBD_FAIL_OBJ_UPDATE_NET_REP 0x1701
+ # OBD_FAIL_OUT_UPDATE_NET_REP 0x1701
do_facet mds${MDTIDX} lctl set_param fail_loc=0x1701
rmdir $remote_dir &
local CLIENT_PID=$!
test_85b() { #bug 16774
lctl set_param -n ldlm.cancel_unused_locks_before_replay "1"
+ if ! combined_mgs_mds ; then
+ mount_mgs_client
+ fi
+
create_pool $FSNAME.$TESTNAME ||
error "unable to create pool $TESTNAME"
do_facet mgs $LCTL pool_add $FSNAME.$TESTNAME $FSNAME-OST0000 ||
do_facet mgs $LCTL pool_destroy $FSNAME.$TESTNAME ||
error "unable to destroy the pool $TESTNAME"
+ if ! combined_mgs_mds ; then
+ umount_mgs_client
+ fi
+
if [ $count2 -ge $count ]; then
error "unused locks are not canceled"
fi
}
run_test 88 "MDS should not assign same objid to different files "
+function calc_osc_kbytes_used() {
+ local kbtotal=$(calc_osc_kbytes kbytestotal)
+ local kbfree=$(calc_osc_kbytes kbytesfree)
+ echo $((kbtotal-kbfree))
+}
+
test_89() {
cancel_lru_locks osc
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
rm -f $DIR/$tdir/$tfile
- wait_mds_ost_sync
- wait_delete_completed
- BLOCKS1=$(df -P $MOUNT | tail -n 1 | awk '{ print $3 }')
+ wait_mds_ost_sync || error "initial MDS-OST sync timed out"
+ wait_delete_completed || error "initial wait delete timed out"
+ local blocks1=$(calc_osc_kbytes_used)
+ local write_size=$(fs_log_size)
+
$SETSTRIPE -i 0 -c 1 $DIR/$tdir/$tfile
- dd if=/dev/zero bs=1M count=10 of=$DIR/$tdir/$tfile
+ [ $write_size -lt 1024 ] && write_size=1024
+ dd if=/dev/zero bs=${write_size}k count=10 of=$DIR/$tdir/$tfile
sync
stop ost1
facet_failover $SINGLEMDS
mount_facet ost1
zconf_mount $(hostname) $MOUNT || error "mount fails"
client_up || error "client_up failed"
- wait_mds_ost_sync
- wait_delete_completed
- BLOCKS2=$(df -P $MOUNT | tail -n 1 | awk '{ print $3 }')
- [ $((BLOCKS2 - BLOCKS1)) -le 4 ] ||
- error $((BLOCKS2 - BLOCKS1)) blocks leaked
-}
+ # wait for the remounted client to connect to ost1
+ local target=$(get_osc_import_name client ost1)
+ wait_import_state "FULL" "osc.${target}.ost_server_uuid" \
+ $(max_recovery_time)
+
+ wait_mds_ost_sync || error "MDS-OST sync timed out"
+ wait_delete_completed || error "wait delete timed out"
+ local blocks2=$(calc_osc_kbytes_used)
+
+ [ $((blocks2 - blocks1)) -le $(fs_log_size) ] ||
+ error $((blocks2 - blocks1)) blocks leaked
+}
run_test 89 "no disk space leak on late ost connection"
cleanup_90 () {
- local facet=$1
- trap 0
- reboot_facet $facet
- change_active $facet
- wait_for_facet $facet
- mount_facet $facet || error "Restart of $facet failed"
- clients_up
+ local facet=$1
+
+ trap 0
+ reboot_facet $facet
+ change_active $facet
+ wait_for_facet $facet
+ mount_facet $facet || error "Restart of $facet failed"
+ clients_up
}
test_90() { # bug 19494
echo "Create the files"
- # file "f${index}" striped over 1 OST
- # file "all" striped over all OSTs
+ # file "f${index}" striped over 1 OST
+ # file "all" striped over all OSTs
- $SETSTRIPE -c $OSTCOUNT $dir/all ||
- error "setstripe failed to create $dir/all"
+ $LFS setstripe -c $OSTCOUNT $dir/all ||
+ error "setstripe failed to create $dir/all"
- for (( i=0; i<$OSTCOUNT; i++ )); do
- local f=$dir/f$i
- $SETSTRIPE -i $i -c 1 $f || error "$SETSTRIPE failed to create $f"
+ for ((i = 0; i < $OSTCOUNT; i++)); do
+ local f=$dir/f$i
- # confirm setstripe actually created the stripe on the requested OST
- local uuid=$(ostuuid_from_index $i)
- for file in f$i all; do
- if [[ $dir/$file != $($LFS find --obd $uuid --name $file $dir) ]]; then
- $GETSTRIPE $dir/$file
- error wrong stripe: $file, uuid: $uuid
- fi
- done
- done
+ $LFS setstripe -i $i -c 1 $f ||
+ error "$LFS setstripe failed to create $f"
+
+ # confirm setstripe actually created stripe on requested OST
+ local uuid=$(ostuuid_from_index $i)
+
+ for file in f$i all; do
+ local found=$($LFS find --obd $uuid --name $file $dir)
+
+ if [[ $dir/$file != $found ]]; then
+ $LFS getstripe $dir/$file
+ error "wrong stripe: $file, uuid: $uuid"
+ fi
+ done
+ done
# Before failing an OST, get its obd name and index
local varsvc=${ostfail}_svc
test_103() {
remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ local mds_version=$(lustre_version_code $SINGLEMDS)
+ [[ $mds_version -gt $(version_code 2.8.54) ]] ||
+ { skip "Need MDS version 2.8.54+"; return; }
+
#define OBD_FAIL_MDS_TRACK_OVERFLOW 0x162
do_facet mds1 $LCTL set_param fail_loc=0x80000162
replay_barrier mds1
replay_barrier mds2
$LFS mkdir -i1 -c$MDSCOUNT $DIR/$tdir/striped_dir
- fail mds1,mds2
+ fail mds2,mds1
check_striped_dir_110 || error "check striped_dir failed"
# OBD_FAIL_SPLIT_UPDATE_REC 0x1702
do_facet mds1 "lctl set_param fail_loc=0x80001702"
- $LFS setdirstripe -c$MDSCOUNT $DIR/$tdir/striped_dir
+ $LFS setdirstripe -i0 -c$MDSCOUNT $DIR/$tdir/striped_dir
fail mds1
$CHECKSTAT -t dir $DIR/$tdir/striped_dir ||
# OBD_FAIL_SPLIT_UPDATE_REC 0x1702
do_facet mds2 "lctl set_param fail_loc=0x80001702"
- $LFS setdirstripe -c$MDSCOUNT $DIR/$tdir/striped_dir
+ $LFS setdirstripe -i0 -c$MDSCOUNT $DIR/$tdir/striped_dir
fail mds2
$CHECKSTAT -t dir $DIR/$tdir/striped_dir ||
replay_barrier mds1
mkdir $DIR/$tdir/dir_1
for ((i = 0; i < 20; i++)); do
- $LFS setdirstripe -c2 $DIR/$tdir/stripe_dir-$i
+ $LFS setdirstripe -i0 -c2 $DIR/$tdir/stripe_dir-$i
done
stop mds1
error "create dir-$i fails"
break
}
- $LFS setdirstripe -c2 $DIR/$tdir/stripe_dir-$i || {
+ $LFS setdirstripe -i0 -c2 $DIR/$tdir/stripe_dir-$i || {
error "create stripe_dir-$i fails"
break
}
}
run_test 120 "DNE fail abort should stop both normal and DNE replay"
+test_121() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.90) ] &&
+ skip "Don't support it before 2.11" &&
+ return 0
+
+ local at_max_saved=$(at_max_get mds)
+
+ touch $DIR/$tfile || error "touch $DIR/$tfile failed"
+ cancel_lru_locks mdc
+
+ multiop_bg_pause $DIR/$tfile s_s || error "multiop $DIR/$tfile failed"
+ mpid=$!
+
+ lctl set_param -n ldlm.cancel_unused_locks_before_replay "0"
+
+ stop mds1
+ change_active mds1
+ wait_for_facet mds1
+
+ #define OBD_FAIL_TGT_RECOVERY_REQ_RACE 0x721
+ do_facet $SINGLEMDS "lctl set_param fail_loc=0x721 fail_val=0"
+ at_max_set 0 mds
+
+ mount_facet mds1
+ wait_clients_import_state "$clients" mds1 FULL
+ clients_up || clients_up || error "failover df: $?"
+
+ kill -USR1 $mpid
+ wait $mpid || error "multiop_bg_pause pid failed"
+
+ do_facet $SINGLEMDS "lctl set_param fail_loc=0x0"
+ lctl set_param -n ldlm.cancel_unused_locks_before_replay "1"
+ at_max_set $at_max_saved mds
+ rm -f $DIR/$tfile
+}
+run_test 121 "lock replay timed out and race"
+
+test_130a() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.90) ] &&
+ skip "Do not support Data-on-MDT before 2.11"
+
+ replay_barrier $SINGLEMDS
+ $LFS setstripe -E 1M -L mdt -E EOF -c 2 $DIR/$tfile
+ fail $SINGLEMDS
+
+ [ $($LFS getstripe -L $DIR/$tfile) == "mdt" ] ||
+ error "Fail to replay DoM file creation"
+}
+run_test 130a "DoM file create (setstripe) replay"
+
+test_130b() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.90) ] &&
+ skip "Do not support Data-on-MDT before 2.11"
+
+ mkdir $DIR/$tdir
+ $LFS setstripe -E 1M -L mdt -E EOF -c 2 $DIR/$tdir
+ replay_barrier $SINGLEMDS
+ touch $DIR/$tdir/$tfile
+ fail $SINGLEMDS
+
+ [ $($LFS getstripe -L $DIR/$tdir/$tfile) == "mdt" ] ||
+ error "Fail to replay DoM file creation"
+}
+run_test 130b "DoM file create (inherited) replay"
+
+test_131a() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.90) ] &&
+ skip "Do not support Data-on-MDT before 2.11"
+
+ $LFS setstripe -E 1M -L mdt -E EOF -c 2 $DIR/$tfile
+ replay_barrier $SINGLEMDS
+ echo "dom_data" | dd of=$DIR/$tfile bs=8 count=1
+ # lock is not canceled and will be replayed
+ fail $SINGLEMDS
+
+ [ $(cat $DIR/$tfile) == "dom_data" ] ||
+ error "Wrong file content after failover"
+}
+run_test 131a "DoM file write lock replay"
+
+test_131b() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.90) ] &&
+ skip "Do not support Data-on-MDT before 2.11"
+
+ $LFS setstripe -E 1M -L mdt -E EOF -c 2 $DIR/$tfile
+ replay_barrier $SINGLEMDS
+ echo "dom_data" | dd of=$DIR/$tfile bs=8 count=1
+ cancel_lru_locks mdc
+
+ fail $SINGLEMDS
+
+ [ $(cat $DIR/$tfile) == "dom_data" ] ||
+ error "Wrong file content after failover"
+}
+run_test 131b "DoM file write replay"
+
+test_132a() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.9.90) ] &&
+ skip "Do not support PFL files before 2.10"
+
+ $LFS setstripe -E 1M -c 1 -E EOF -c 2 $DIR/$tfile
+ replay_barrier $SINGLEMDS
+ # write over the first component size cause next component instantiation
+ dd if=/dev/urandom of=$DIR/$tfile bs=1M count=1 seek=1 ||
+ error "dd to $DIR/$tfile failed"
+ lfs getstripe $DIR/$tfile
+
+ cksum=$(md5sum $DIR/$tfile | awk '{print $1}')
+ $LFS getstripe -I2 $DIR/$tfile | grep -q lmm_objects ||
+ error "Component #1 was not instantiated"
+
+ fail $SINGLEMDS
+
+ lfs getstripe $DIR/$tfile
+ $LFS getstripe -I2 $DIR/$tfile | grep -q lmm_objects ||
+ error "Component #1 instantiation was not replayed"
+ cksum2=$(md5sum $DIR/$tfile | awk '{print $1}')
+ if [ $cksum != $cksum2 ] ; then
+ error_noexit "New cksum $cksum2 does not match original $cksum"
+ fi
+}
+run_test 132a "PFL new component instantiate replay"
+
complete $SECONDS
check_and_cleanup_lustre
exit_status