LU-1898 test: new tests 8[a,b,c,d,e] need 2.3 or later

[fs/lustre-release.git] / lustre / tests / replay-ost-single.sh

diff --git a/lustre/tests/replay-ost-single.sh b/lustre/tests/replay-ost-single.sh
index 83f790f..8606cbb 100755 (executable)
--- a/lustre/tests/replay-ost-single.sh
+++ b/lustre/tests/replay-ost-single.sh
@@ -248,102 +248,112 @@ test_7() {
 run_test 7 "Fail OST before obd_destroy"
 
 test_8a() {
-    verify=$ROOT/tmp/verify-$$
-    dd if=/dev/urandom of=$verify bs=4096 count=1280 ||
-        error "Create verify file failed"
-#define OBD_FAIL_OST_DQACQ_NET           0x230
-    do_facet ost1 "lctl set_param fail_loc=0x230"
-    dd if=$verify of=$TDIR/$tfile bs=4096 count=1280 oflag=sync &
-    ddpid=$!
-    sleep $TIMEOUT  # wait for the io to become redo io
-    if ! ps -p $ddpid  > /dev/null 2>&1; then
-            error "redo io finished incorrectly"
-            return 1
-    fi
-    do_facet ost1 "lctl set_param fail_loc=0"
-    wait $ddpid || true
-    cancel_lru_locks osc
-    cmp $verify $TDIR/$tfile || return 2
-    rm -f $verify $TDIR/$tfile
+       [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.3.0) ]] ||
+               { skip "Need MDS version at least 2.3.0"; return; }
+       verify=$ROOT/tmp/verify-$$
+       dd if=/dev/urandom of=$verify bs=4096 count=1280 ||
+               error "Create verify file failed"
+#define OBD_FAIL_OST_DQACQ_NET 0x230
+       do_facet ost1 "lctl set_param fail_loc=0x230"
+       dd if=$verify of=$TDIR/$tfile bs=4096 count=1280 oflag=sync &
+       ddpid=$!
+       sleep $TIMEOUT  # wait for the io to become redo io
+       if ! ps -p $ddpid  > /dev/null 2>&1; then
+               error "redo io finished incorrectly"
+               return 1
+       fi
+       do_facet ost1 "lctl set_param fail_loc=0"
+       wait $ddpid || true
+       cancel_lru_locks osc
+       cmp $verify $TDIR/$tfile || return 2
+       rm -f $verify $TDIR/$tfile
        message=`dmesg | grep "redo for recoverable error -115"`
        [ -z "$message" ] || error "redo error messages found in dmesg"
 }
 run_test 8a "Verify redo io: redo io when get -EINPROGRESS error"
 
 test_8b() {
-    verify=$ROOT/tmp/verify-$$
-    dd if=/dev/urandom of=$verify bs=4096 count=1280 ||
-        error "Create verify file failed"
-#define OBD_FAIL_OST_DQACQ_NET           0x230
-    do_facet ost1 "lctl set_param fail_loc=0x230"
-    dd if=$verify of=$TDIR/$tfile bs=4096 count=1280 oflag=sync &
-    ddpid=$!
-    sleep $TIMEOUT  # wait for the io to become redo io
-    fail ost1
-    do_facet ost1 "lctl set_param fail_loc=0"
-    wait $ddpid || return 1
-    cancel_lru_locks osc
-    cmp $verify $TDIR/$tfile || return 2
-    rm -f $verify $TDIR/$tfile
+       [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.3.0) ]] ||
+               { skip "Need MDS version at least 2.3.0"; return; }
+       verify=$ROOT/tmp/verify-$$
+       dd if=/dev/urandom of=$verify bs=4096 count=1280 ||
+               error "Create verify file failed"
+#define OBD_FAIL_OST_DQACQ_NET 0x230
+       do_facet ost1 "lctl set_param fail_loc=0x230"
+       dd if=$verify of=$TDIR/$tfile bs=4096 count=1280 oflag=sync &
+       ddpid=$!
+       sleep $TIMEOUT  # wait for the io to become redo io
+       fail ost1
+       do_facet ost1 "lctl set_param fail_loc=0"
+       wait $ddpid || return 1
+       cancel_lru_locks osc
+       cmp $verify $TDIR/$tfile || return 2
+       rm -f $verify $TDIR/$tfile
 }
 run_test 8b "Verify redo io: redo io should success after recovery"
 
 test_8c() {
-    verify=$ROOT/tmp/verify-$$
-    dd if=/dev/urandom of=$verify bs=4096 count=1280 ||
-        error "Create verify file failed"
-#define OBD_FAIL_OST_DQACQ_NET           0x230
-    do_facet ost1 "lctl set_param fail_loc=0x230"
-    dd if=$verify of=$TDIR/$tfile bs=4096 count=1280 oflag=sync &
-    ddpid=$!
-    sleep $TIMEOUT  # wait for the io to become redo io
-    ost_evict_client
-    # allow recovery to complete
-    sleep $((TIMEOUT + 2))
-    do_facet ost1 "lctl set_param fail_loc=0"
-    wait $ddpid
-    cancel_lru_locks osc
-    cmp $verify $TDIR/$tfile && return 2
-    rm -f $verify $TDIR/$tfile
+       [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.3.0) ]] ||
+               { skip "Need MDS version at least 2.3.0"; return; }
+       verify=$ROOT/tmp/verify-$$
+       dd if=/dev/urandom of=$verify bs=4096 count=1280 ||
+               error "Create verify file failed"
+#define OBD_FAIL_OST_DQACQ_NET 0x230
+       do_facet ost1 "lctl set_param fail_loc=0x230"
+       dd if=$verify of=$TDIR/$tfile bs=4096 count=1280 oflag=sync &
+       ddpid=$!
+       sleep $TIMEOUT  # wait for the io to become redo io
+       ost_evict_client
+       # allow recovery to complete
+       sleep $((TIMEOUT + 2))
+       do_facet ost1 "lctl set_param fail_loc=0"
+       wait $ddpid
+       cancel_lru_locks osc
+       cmp $verify $TDIR/$tfile && return 2
+       rm -f $verify $TDIR/$tfile
 }
 run_test 8c "Verify redo io: redo io should fail after eviction"
 
 test_8d() {
-#define OBD_FAIL_MDS_DQACQ_NET           0x187
-    do_facet $SINGLEMDS "lctl set_param fail_loc=0x187"
-    # test the non-intent create path
-    mcreate $TDIR/$tfile &
-    cpid=$!
-    sleep $TIMEOUT
-    if ! ps -p $cpid  > /dev/null 2>&1; then
-            error "mknod finished incorrectly"
-            return 1
-    fi
-    do_facet $SINGLEMDS "lctl set_param fail_loc=0"
-    wait $cpid || return 2
-    stat $TDIR/$tfile || error "mknod failed"
-
-    rm $TDIR/$tfile
-
-#define OBD_FAIL_MDS_DQACQ_NET           0x187
-    do_facet $SINGLEMDS "lctl set_param fail_loc=0x187"
-    # test the intent create path
-    openfile -f O_RDWR:O_CREAT $TDIR/$tfile &
-    cpid=$!
-    sleep $TIMEOUT
-    if ! ps -p $cpid > /dev/null 2>&1; then
-            error "open finished incorrectly"
-            return 3
-    fi
-    do_facet $SINGLEMDS "lctl set_param fail_loc=0"
-    wait $cpid || return 4
-    stat $TDIR/$tfile || error "open failed"
+       [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.3.0) ]] ||
+               { skip "Need MDS version at least 2.3.0"; return; }
+#define OBD_FAIL_MDS_DQACQ_NET 0x187
+       do_facet $SINGLEMDS "lctl set_param fail_loc=0x187"
+       # test the non-intent create path
+       mcreate $TDIR/$tfile &
+       cpid=$!
+       sleep $TIMEOUT
+       if ! ps -p $cpid  > /dev/null 2>&1; then
+               error "mknod finished incorrectly"
+               return 1
+       fi
+       do_facet $SINGLEMDS "lctl set_param fail_loc=0"
+       wait $cpid || return 2
+       stat $TDIR/$tfile || error "mknod failed"
+
+       rm $TDIR/$tfile
+
+#define OBD_FAIL_MDS_DQACQ_NET 0x187
+       do_facet $SINGLEMDS "lctl set_param fail_loc=0x187"
+       # test the intent create path
+       openfile -f O_RDWR:O_CREAT $TDIR/$tfile &
+       cpid=$!
+       sleep $TIMEOUT
+       if ! ps -p $cpid > /dev/null 2>&1; then
+               error "open finished incorrectly"
+               return 3
+       fi
+       do_facet $SINGLEMDS "lctl set_param fail_loc=0"
+       wait $cpid || return 4
+       stat $TDIR/$tfile || error "open failed"
 }
 run_test 8d "Verify redo creation on -EINPROGRESS"
 
 test_8e() {
+       [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.3.0) ]] ||
+               { skip "Need MDS version at least 2.3.0"; return; }
        sleep 1 # ensure we have a fresh statfs
-#define OBD_FAIL_OST_STATFS_EINPROGRESS  0x231
+#define OBD_FAIL_OST_STATFS_EINPROGRESS 0x231
        do_facet ost1 "lctl set_param fail_loc=0x231"
        df $MOUNT &
        dfpid=$!