set -e
PTLDEBUG=${PTLDEBUG:--1}
-LUSTRE=${LUSTRE:-`dirname $0`/..}
+LUSTRE=${LUSTRE:-$(cd $(dirname $0)/..; echo $PWD)}
SETUP=${SETUP:-""}
CLEANUP=${CLEANUP:-""}
. $LUSTRE/tests/test-framework.sh
init_test_env $@
. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
-ostfailover_HOST=${ostfailover_HOST:-$ost_HOST}
+# While we do not use OSTCOUNT=1 setup anymore,
+# ost1failover_HOST is used
+#ostfailover_HOST=${ostfailover_HOST:-$ost_HOST}
#failover= must be defined in OST_MKFS_OPTIONS if ostfailover_HOST != ost_HOST
+remote_ost_nodsh && skip "remote OST with nodsh" && exit 0
+
+if [ "$FAILURE_MODE" = "HARD" ] && mixed_ost_devs; then
+ skip "$0: Several ost services on one ost node are used with FAILURE_MODE=$FAILURE_MODE. "
+ exit 0
+fi
+
# Tests that fail on uml
CPU=`awk '/model/ {print $4}' /proc/cpuinfo`
[ "$CPU" = "UML" ] && EXCEPT="$EXCEPT 6"
ALWAYS_EXCEPT="$REPLAY_OST_SINGLE_EXCEPT"
#
-[ "$SLOW" = "no" ] && EXCEPT_SLOW=""
-
-# It is replay-ost-single, after all
-OSTCOUNT=1
+[ "$SLOW" = "no" ] && EXCEPT_SLOW="5"
build_test_filter
-REFORMAT=--reformat cleanup_and_setup_lustre
+check_and_setup_lustre
+assert_DIR
rm -rf $DIR/[df][0-9]*
+TDIR=$DIR/d0.${TESTSUITE}
+mkdir -p $TDIR
+$LFS setstripe $TDIR -i 0 -c 1
+$LFS getstripe $TDIR
+
test_0a() {
zconf_umount `hostname` $MOUNT -f
# needs to run during initial client->OST connection
#define OBD_FAIL_OST_ALL_REPLY_NET 0x211
- do_facet ost "sysctl -w lustre.fail_loc=0x80000211"
+ do_facet ost1 "lctl set_param fail_loc=0x80000211"
zconf_mount `hostname` $MOUNT && df $MOUNT || error "0a mount fail"
}
run_test 0a "target handle mismatch (bug 5317) `date +%H:%M:%S`"
test_0b() {
fail ost1
- cp /etc/profile $DIR/$tfile
+ cp /etc/profile $TDIR/$tfile
sync
- diff /etc/profile $DIR/$tfile
- rm -f $DIR/$tfile
+ diff /etc/profile $TDIR/$tfile
+ rm -f $TDIR/$tfile
}
run_test 0b "empty replay"
test_1() {
- date > $DIR/$tfile
+ date > $TDIR/$tfile || error "error creating $TDIR/$tfile"
fail ost1
- $CHECKSTAT -t file $DIR/$tfile || return 1
- rm -f $DIR/$tfile
+ $CHECKSTAT -t file $TDIR/$tfile || return 1
+ rm -f $TDIR/$tfile
}
run_test 1 "touch"
test_2() {
for i in `seq 10`; do
- echo "tag-$i" > $DIR/$tfile-$i
+ echo "tag-$i" > $TDIR/$tfile-$i || error "create $TDIR/$tfile-$i"
done
fail ost1
for i in `seq 10`; do
- grep -q "tag-$i" $DIR/$tfile-$i || error "f2-$i"
+ grep -q "tag-$i" $TDIR/$tfile-$i || error "grep $TDIR/$tfile-$i"
done
- rm -f $DIR/$tfile-*
+ rm -f $TDIR/$tfile-*
}
run_test 2 "|x| 10 open(O_CREAT)s"
test_3() {
verify=$ROOT/tmp/verify-$$
- dd if=/dev/urandom bs=4096 count=1280 | tee $verify > $DIR/$tfile &
+ dd if=/dev/urandom bs=4096 count=1280 | tee $verify > $TDIR/$tfile &
ddpid=$!
sync &
fail ost1
wait $ddpid || return 1
- cmp $verify $DIR/$tfile || return 2
- rm -f $verify $DIR/$tfile
+ cmp $verify $TDIR/$tfile || return 2
+ rm -f $verify $TDIR/$tfile
}
run_test 3 "Fail OST during write, with verification"
test_4() {
verify=$ROOT/tmp/verify-$$
- dd if=/dev/urandom bs=4096 count=1280 | tee $verify > $DIR/$tfile
+ dd if=/dev/urandom bs=4096 count=1280 | tee $verify > $TDIR/$tfile
# invalidate cache, so that we're reading over the wire
cancel_lru_locks osc
- cmp $verify $DIR/$tfile &
+ cmp $verify $TDIR/$tfile &
cmppid=$!
fail ost1
wait $cmppid || return 1
- rm -f $verify $DIR/$tfile
+ rm -f $verify $TDIR/$tfile
}
run_test 4 "Fail OST during read, with verification"
test_5() {
- [ -z "`which iozone 2> /dev/null`" ] && log "iozone missing" && return
- FREE=`df -P -h $DIR | tail -n 1 | awk '{ print $3 }'`
- case $FREE in
- *T|*G) FREE=1G;;
- esac
+ [ -z "`which iozone 2> /dev/null`" ] && skip "iozone missing" && return 0
+ FREE=`df -P $TDIR | tail -n 1 | awk '{ print $4/2 }'`
+ GB=1048576 # 1048576KB == 1GB
+ if (( FREE > GB )); then
+ FREE=$GB
+ fi
IOZONE_OPTS="-i 0 -i 1 -i 2 -+d -r 4 -s $FREE"
- iozone $IOZONE_OPTS -f $DIR/$tfile &
+ iozone $IOZONE_OPTS -f $TDIR/$tfile &
PID=$!
sleep 8
wait $PID
RC=$?
log "iozone rc=$RC"
- rm -f $DIR/$tfile
+ rm -f $TDIR/$tfile
[ $RC -ne 0 ] && return $RC || true
}
run_test 5 "Fail OST during iozone"
kbytesfree() {
- awk '{total+=$1} END {print total}' /proc/fs/lustre/osc/*-osc-*/kbytesfree
+ calc_osc_kbytes kbytesfree
}
test_6() {
- f=$DIR/$tfile
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return 0
+
+ f=$TDIR/$tfile
rm -f $f
sync && sleep 2 && sync # wait for delete thread
before=`kbytesfree`
sleep 2 # ensure we have a fresh statfs
sync
#define OBD_FAIL_MDS_REINT_NET_REP 0x119
- do_facet mds "sysctl -w lustre.fail_loc=0x80000119"
+ do_facet mds "lctl set_param fail_loc=0x80000119"
after_dd=`kbytesfree`
log "before: $before after_dd: $after_dd"
(( $before > $after_dd )) || return 1
run_test 6 "Fail OST before obd_destroy"
test_7() {
- f=$DIR/$tfile
+ f=$TDIR/$tfile
rm -f $f
sync && sleep 5 && sync # wait for delete thread
before=`kbytesfree`
equals_msg `basename $0`: test complete, cleaning up
check_and_cleanup_lustre
-[ -f "$TESTSUITELOG" ] && cat $TESTSUITELOG || true
+[ -f "$TESTSUITELOG" ] && cat $TESTSUITELOG && grep -q FAIL $TESTSUITELOG && exit 1 || true