-#!/bin/sh
+#!/bin/bash
set -e
+# bug number: 6088 10124 10800
+ALWAYS_EXCEPT="8 15c 17 $REPLAY_DUAL_EXCEPT"
+
+PTLDEBUG=${PTLDEBUG:--1}
LUSTRE=${LUSTRE:-`dirname $0`/..}
. $LUSTRE/tests/test-framework.sh
init_test_env $@
-. ${CONFIG:=$LUSTRE/tests/cfg/lmv.sh}
+. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
SETUP=${SETUP:-"setup"}
CLEANUP=${CLEANUP:-"cleanup"}
-gen_config() {
- rm -f $XMLCONFIG
- if [ "$MDSCOUNT" -gt 1 ]; then
- add_lmv lmv1_svc
- for mds in `mds_list`; do
- MDSDEV=$TMP/${mds}-`hostname`
- add_mds $mds --dev $MDSDEV --size $MDSSIZE --lmv lmv1_svc
- done
- add_lov_to_lmv lov1 lmv1_svc --stripe_sz $STRIPE_BYTES \
- --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
- MDS=lmv1
- else
- add_mds mds1 --dev $MDSDEV --size $MDSSIZE
- add_lov lov1 mds1 --stripe_sz $STRIPE_BYTES \
- --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
- MDS=mds1_svc
- fi
-
- add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE --failover
- add_ost ost2 --lov lov1 --dev ${OSTDEV}-2 --size $OSTSIZE --failover
- add_client client ${MDS} --lov lov1 --path $MOUNT
-}
-
build_test_filter
-SETUP=${SETUP:-"setup"}
-CLEANUP=${CLEANUP:-"cleanup"}
-
cleanup() {
- # make sure we are using the primary MDS, so the config log will
- # be able to clean up properly.
- activemds=`facet_active mds1`
- if [ $activemds != "mds1" ]; then
- fail mds1
- fi
-
- umount $MOUNT2 || true
- umount $MOUNT || true
- rmmod llite
- for mds in `mds_list`; do
- stop $mds ${FORCE} $MDSLCONFARGS
- done
- stop ost2 ${FORCE}
- stop ost ${FORCE} --dump cleanup-dual.log
+ stopall
}
if [ "$ONLY" == "cleanup" ]; then
- sysctl -w portals.debug=0
+ sysctl -w lnet.debug=0
cleanup
exit
fi
setup() {
- gen_config
- start ost --reformat $OSTLCONFARGS
- PINGER=`cat /proc/fs/lustre/pinger`
-
- if [ "$PINGER" != "on" ]; then
- echo "ERROR: Lustre must be built with --enable-pinger for replay-dual"
- stop ost
- exit 1
- fi
-
- start ost2 --reformat $OSTLCONFARGS
- [ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
- for mds in `mds_list`; do
- start $mds --reformat $MDSLCONFARGS
- done
- grep " $MOUNT " /proc/mounts || zconf_mount `hostname` $MOUNT
- grep " $MOUNT2 " /proc/mounts || zconf_mount `hostname` $MOUNT2
-
- echo $TIMEOUT > /proc/sys/lustre/timeout
- echo $UPCALL > /proc/sys/lustre/upcall
+ cleanup
+ formatall
+ setupall
+ mount_client $MOUNT2
}
$SETUP
[ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
-
test_1() {
touch $MOUNT1/a
- replay_barrier mds1
+ replay_barrier mds
touch $MOUNT2/b
- fail mds1
+ fail mds
checkstat $MOUNT2/a || return 1
checkstat $MOUNT1/b || return 2
rm $MOUNT2/a $MOUNT1/b
test_2() {
- replay_barrier mds1
+ replay_barrier mds
mkdir $MOUNT1/adir
- fail mds1
+ fail mds
checkstat $MOUNT2/adir || return 1
rmdir $MOUNT2/adir
checkstat $MOUNT2/adir && return 2
return 0
}
-
run_test 2 "|X| mkdir adir"
test_3() {
- replay_barrier mds1
+ replay_barrier mds
mkdir $MOUNT1/adir
mkdir $MOUNT2/adir/bdir
- fail mds1
+ fail mds
checkstat $MOUNT2/adir || return 1
checkstat $MOUNT1/adir/bdir || return 2
rmdir $MOUNT2/adir/bdir $MOUNT1/adir
checkstat $MOUNT2/adir/bdir && return 4
return 0
}
-
run_test 3 "|X| mkdir adir, mkdir adir/bdir "
test_4() {
mkdir $MOUNT1/adir
- replay_barrier mds1
+ replay_barrier mds
mkdir $MOUNT1/adir && return 1
mkdir $MOUNT2/adir/bdir
- fail mds1
+ fail mds
checkstat $MOUNT2/adir || return 2
checkstat $MOUNT1/adir/bdir || return 3
checkstat $MOUNT2/adir/bdir && return 5
return 0
}
-
run_test 4 "|X| mkdir adir (-EEXIST), mkdir adir/bdir "
# give multiop a chance to open
sleep 1
rm -f $MOUNT1/a
- replay_barrier mds1
+ replay_barrier mds
kill -USR1 $pid
wait $pid || return 1
- fail mds1
+ fail mds
[ -e $MOUNT2/a ] && return 2
return 0
}
# give multiop a chance to open
sleep 1
rm -f $MOUNT1/a
- replay_barrier mds1
+ replay_barrier mds
kill -USR1 $pid1
wait $pid1 || return 1
- fail mds1
+ fail mds
kill -USR1 $pid2
wait $pid2 || return 1
[ -e $MOUNT2/a ] && return 2
}
run_test 6 "open1, open2, unlink |X| close1 [fail mds] close2"
-test_6b() {
- mcreate $MOUNT1/a
- multiop $MOUNT2/a o_c &
- pid1=$!
- multiop $MOUNT1/a o_c &
- pid2=$!
- # give multiop a chance to open
- sleep 1
- rm -f $MOUNT1/a
- replay_barrier mds1
- kill -USR1 $pid2
- wait $pid2 || return 1
-
- fail mds1
- kill -USR1 $pid1
- wait $pid1 || return 1
- [ -e $MOUNT2/a ] && return 2
- return 0
-}
-run_test 6b "open1, open2, unlink |X| close2 [fail mds] close1"
-
test_8() {
- replay_barrier mds1
+ replay_barrier mds
drop_reint_reply "mcreate $MOUNT1/$tfile" || return 1
- fail mds1
+ fail mds
checkstat $MOUNT2/$tfile || return 2
rm $MOUNT1/$tfile || return 3
run_test 8 "replay of resent request"
test_9() {
- replay_barrier mds1
+ replay_barrier mds
mcreate $MOUNT1/$tfile-1
mcreate $MOUNT2/$tfile-2
# drop first reint reply
sysctl -w lustre.fail_loc=0x80000119
- fail mds1
+ fail mds
sysctl -w lustre.fail_loc=0
rm $MOUNT1/$tfile-[1,2] || return 1
test_10() {
mcreate $MOUNT1/$tfile-1
- replay_barrier mds1
+ replay_barrier mds
munlink $MOUNT1/$tfile-1
mcreate $MOUNT2/$tfile-2
# drop first reint reply
sysctl -w lustre.fail_loc=0x80000119
- fail mds1
+ fail mds
sysctl -w lustre.fail_loc=0
checkstat $MOUNT1/$tfile-1 && return 1
run_test 10 "resending a replayed unlink"
test_11() {
- replay_barrier mds1
+ replay_barrier mds
mcreate $MOUNT1/$tfile-1
mcreate $MOUNT2/$tfile-2
mcreate $MOUNT1/$tfile-3
mcreate $MOUNT1/$tfile-5
# drop all reint replies for a while
sysctl -w lustre.fail_loc=0x0119
- facet_failover mds1
+ facet_failover mds
#sleep for while, let both clients reconnect and timeout
sleep $((TIMEOUT * 2))
sysctl -w lustre.fail_loc=0
-
+ while [ -z "$(ls $MOUNT1/$tfile-[1-5] 2>/dev/null)" ]; do
+ sleep 5
+ echo -n "."
+ done
+ ls $MOUNT1/$tfile-[1-5]
rm $MOUNT1/$tfile-[1-5] || return 1
return 0
run_test 11 "both clients timeout during replay"
test_12() {
- replay_barrier mds1
+ replay_barrier mds
multiop $DIR/$tfile mo_c &
MULTIPID=$!
sleep 5
- # drop first enqueue
+#define OBD_FAIL_LDLM_ENQUEUE 0x302
sysctl -w lustre.fail_loc=0x80000302
- facet_failover mds1
+ facet_failover mds
df $MOUNT || return 1
sysctl -w lustre.fail_loc=0
ls $DIR/$tfile
- $CHECKSTAT -t file $DIR/$tfile || return 2
kill -USR1 $MULTIPID || return 3
wait $MULTIPID || return 4
+ $CHECKSTAT -t file $DIR/$tfile || return 2
rm $DIR/$tfile
return 0
MULTIPID=$!
sleep 5
- replay_barrier mds1
+ replay_barrier mds
kill -USR1 $MULTIPID || return 3
wait $MULTIPID || return 4
# drop close
sysctl -w lustre.fail_loc=0x80000115
- facet_failover mds1
+ facet_failover mds
df $MOUNT || return 1
sysctl -w lustre.fail_loc=0
}
run_test 13 "close resend timeout"
-
test_14() {
- replay_barrier mds1
+ replay_barrier mds
createmany -o $MOUNT1/$tfile- 25
createmany -o $MOUNT2/$tfile-2- 1
createmany -o $MOUNT1/$tfile-3- 25
umount $MOUNT2
- facet_failover mds1
+ facet_failover mds
# expect failover to fail
df $MOUNT && return 1
+ sleep 1
- # first 25 files shouuld have been
- # replayed
- sleep 2
+ # first 25 files should have been replayed
unlinkmany $MOUNT1/$tfile- 25 || return 2
zconf_mount `hostname` $MOUNT2
run_test 14 "timeouts waiting for lost client during replay"
test_15() {
- replay_barrier mds1
+ replay_barrier mds
createmany -o $MOUNT1/$tfile- 25
createmany -o $MOUNT2/$tfile-2- 1
umount $MOUNT2
- facet_failover mds1
+ facet_failover mds
df $MOUNT || return 1
unlinkmany $MOUNT1/$tfile- 25 || return 2
+ [ -e $MOUNT1/$tfile-2-0 ] && error "$tfile-2-0 exists"
zconf_mount `hostname` $MOUNT2
return 0
}
run_test 15 "timeout waiting for lost client during replay, 1 client completes"
+
+test_15a() {
+ local ost_last_id=""
+ local osc_last_id=""
+
+ replay_barrier mds
+ echo "data" > "$MOUNT2/${tfile}-m2"
+
+ umount $MOUNT2
+ facet_failover mds
+ df $MOUNT || return 1
+
+ ost_last_id=`cat /proc/fs/lustre/obdfilter/*/last_id`
+ mds_last_id=`cat /proc/fs/lustre/osc/*mds*/last_id`
+
+ echo "Ids after MDS<->OST synchonizing"
+ echo "--------------------------------"
+ echo "MDS last_id:"
+ echo $mds_last_id
+ echo "OST last_id:"
+ echo $ost_last_id
+
+ local i=0
+ echo $ost_last_id | while read id; do
+ ost_ids[$i]=$id
+ ((i++))
+ done
+
+ i=0
+ echo $mds_last_id | while read id; do
+ mds_ids[$i]=$id
+ ((i++))
+ done
+
+ local arr_len=${#mds_ids[*]}
+ for ((i=0;i<$arr_len;i++)); do
+ mds_id=${mds_ids[i]}
+ ost_id=${ost_ids[i]}
+
+ test $mds_id -ge $ost_id || {
+ echo "MDS last id ($mds_id) is smaller than OST one ($ost_id)"
+ return 2
+ }
+ done
+
+ zconf_mount `hostname` $MOUNT2
+ return 0
+}
+#CROW run_test 15a "OST clear orphans - synchronize ids on MDS and OST"
+
+test_15b() {
+ replay_barrier mds
+ echo "data" > "$MOUNT2/${tfile}-m2"
+ umount $MOUNT2
+
+ do_facet ost1 "sysctl -w lustre.fail_loc=0x80000802"
+ facet_failover mds
+
+ df $MOUNT || return 1
+ do_facet ost1 "sysctl -w lustre.fail_loc=0"
+
+ zconf_mount `hostname` $MOUNT2
+ return 0
+}
+#CROW run_test 15b "multiple delayed OST clear orphans"
+
+test_15c() {
+ replay_barrier mds
+ for ((i = 0; i < 2000; i++)); do
+ echo "data" > "$MOUNT2/${tfile}-$i" || error "create ${tfile}-$i failed"
+ done
+
+ umount $MOUNT2
+ facet_failover mds
+
+ df $MOUNT || return 1
+
+ zconf_mount `hostname` $MOUNT2
+ return 0
+}
+run_test 15c "remove multiple OST orphans"
+
test_16() {
- replay_barrier mds1
+ replay_barrier mds
createmany -o $MOUNT1/$tfile- 25
createmany -o $MOUNT2/$tfile-2- 1
umount $MOUNT2
- facet_failover mds1
+ facet_failover mds
sleep $TIMEOUT
- facet_failover mds1
+ facet_failover mds
df $MOUNT || return 1
unlinkmany $MOUNT1/$tfile- 25 || return 2
return 0
}
-#run_test 16 "fail MDS during recovery (3571)"
+run_test 16 "fail MDS during recovery (3571)"
test_17() {
createmany -o $MOUNT1/$tfile- 25
createmany -o $MOUNT2/$tfile-2- 1
# Make sure the disconnect is lost
- replay_barrier ost
+ replay_barrier ost1
umount $MOUNT2
- echo -1 > /proc/sys/portals/debug
- facet_failover ost
+ facet_failover ost1
sleep $TIMEOUT
- facet_failover ost
+ facet_failover ost1
df $MOUNT || return 1
unlinkmany $MOUNT1/$tfile- 25 || return 2
return 0
}
-#Still not support ost fail over
-#run_test 17 "fail OST during recovery (3571)"
+run_test 17 "fail OST during recovery (3571)"
-test_18 () {
- replay_barrier mds1
- multiop $MOUNT2/$tfile O_c &
- pid2=$!
- multiop $MOUNT1/$tfile O_c &
- pid1=$!
- # give multiop a chance to open
- sleep 1
- kill -USR1 $pid2
- kill -USR1 $pid1
+# cleanup with blocked enqueue fails until timer elapses (MDS busy), wait for it
+export NOW=0
+
+test_18() { # bug 3822 - evicting client with enqueued lock
+ #set -vx
+ mkdir -p $MOUNT1/$tdir
+ touch $MOUNT1/$tdir/f0
+#define OBD_FAIL_LDLM_ENQUEUE_BLOCKED 0x30b
+ statmany -s $MOUNT1/$tdir/f 1 500 &
+ OPENPID=$!
+ NOW=`date +%s`
+ do_facet mds sysctl -w lustre.fail_loc=0x8000030b # hold enqueue
sleep 1
- umount $MOUNT2
- facet_failover mds1
- df || df || return 1
- zconf_mount `hostname` $MOUNT2
+#define OBD_FAIL_LDLM_BL_CALLBACK 0x305
+ do_facet client sysctl -w lustre.fail_loc=0x80000305 # drop cb, evict
+ cancel_lru_locks mdc
+ usleep 500 # wait to ensure first client is one that will be evicted
+ openfile -f O_RDONLY $MOUNT2/$tdir/f0
+ wait $OPENPID
+ dmesg | grep "entering recovery in server" && \
+ error "client not evicted" || true
}
-run_test 18 "replay open, Abort recovery, don't assert (3892)"
-
+run_test 18 "ldlm_handle_enqueue succeeds on evicted export (3822)"
-# cleanup with blocked enqueue fails until timer elapses (MDS busy), wait for
-# itexport NOW=0
+test_19() { # Bug 10991 - resend of open request does not fail assertion.
+ replay_barrier mds
+ drop_ldlm_reply "createmany -o $DIR/$tfile 1" || return 1
+ fail mds
+ checkstat $DIR2/${tfile}0 || return 2
+ rm $DIR/${tfile}0 || return 3
-test_20() { # bug 3822 - evicting client with enqueued lock
- mkdir -p $MOUNT1/$tdir
- touch $MOUNT1/$tdir/f0
-#define OBD_FAIL_LDLM_ENQUEUE_BLOCKED 0x30b
- statmany -s $MOUNT1/$tdir/f 500 &
- OPENPID=$!
- NOW=`date +%s`
- do_facet mds1 sysctl -w lustre.fail_loc=0x8000030b # hold enqueue
- sleep 1
-#define OBD_FAIL_LDLM_BL_CALLBACK 0x305
- do_facet client sysctl -w lustre.fail_loc=0x80000305 # drop cb, evict
- cancel_lru_locks MDC
- usleep 500 # wait to ensure first client is one that will be evicted
- openfile -f O_RDONLY $MOUNT2/$tdir/f0
- wait $OPENPID
- dmesg | grep "entering recovery in server" && \
- error "client not evicted" || true
+ return 0
}
-run_test 20 "ldlm_handle_enqueue succeeds on evicted export (3822)"
+run_test 19 "resend of open request"
if [ "$ONLY" != "setup" ]; then
- equals_msg test complete, cleaning up
- if [ $NOW ]; then
- SLEEP=$((`date +%s` - $NOW))
- [ $SLEEP -lt $TIMEOUT ] && sleep $SLEEP
- fi
- $CLEANUP
+ equals_msg test complete, cleaning up
+ SLEEP=$((`date +%s` - $NOW))
+ [ $SLEEP -lt $TIMEOUT ] && sleep $SLEEP
+ $CLEANUP
fi
+echo "$0: completed"
git://git.whamcloud.com / fs / lustre-release.git / blobdiff