[ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
+# if there is no CLIENT1 defined, some tests can be ran on localhost
+CLIENT1=${CLIENT1:-$HOSTNAME}
+# if CLIENT2 doesn't exist then use CLIENT1 instead
+# All tests should use CLIENT2 with MOUNT2 only therefore it will work if
+# $CLIENT2 == CLIENT1
+# Exception is the test which need two separate nodes
+CLIENT2=${CLIENT2:-$CLIENT1}
+
# LU-482 Avert LVM and VM inability to flush caches in pre .33 kernels
if [ $LINUX_VERSION_CODE -lt $(version_code 2.6.33) ]; then
sync
[ $n_attempts -gt 3 ] &&
error "The test cannot check whether COS works or not: all renames are replied w/o COS"
done
+ zconf_mount_clients $CLIENTS $MOUNT2
restore_lustre_params < $param_file
rm -f $param_file
return 0
}
run_test 21b "commit on sharing, two clients"
+checkstat_22() {
+ checkstat $MOUNT1/$remote_dir || return 1
+ checkstat $MOUNT1/$remote_dir/dir || return 2
+ checkstat $MOUNT1/$remote_dir/$tfile-1 || return 3
+ checkstat $MOUNT1/$remote_dir/dir/$tfile-1 || return 4
+ return 0
+}
+
+create_remote_dir_files_22() {
+ do_node $CLIENT2 mkdir ${MOUNT2}/$remote_dir/dir || return 1
+ do_node $CLIENT1 createmany -o $MOUNT1/$remote_dir/dir/$tfile- 2 ||
+ return 2
+ do_node $CLIENT2 createmany -o $MOUNT2/$remote_dir/$tfile- 2 ||
+ return 3
+ return 0
+}
+
+test_22a () {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
+ ([ $FAILURE_MODE == "HARD" ] &&
+ [ "$(facet_host mds1)" == "$(facet_host mds2)" ]) &&
+ skip "MDTs needs to be on diff hosts for HARD fail mode" &&
+ return 0
+
+ local MDTIDX=1
+ local remote_dir=${tdir}/remote_dir
+
+ do_node $CLIENT1 mkdir -p $MOUNT1/${tdir}
+
+ # OBD_FAIL_MDS_REINT_NET_REP 0x119
+ do_facet mds${MDTIDX} lctl set_param fail_loc=0x119
+ do_node $CLIENT1 $LFS mkdir -i $MDTIDX $MOUNT1/$remote_dir &
+ CLIENT_PID=$!
+ do_facet mds${MDTIDX} lctl set_param fail_loc=0
+
+ fail mds${MDTIDX}
+ wait $CLIENT_PID || error "lfs mkdir failed"
+
+ replay_barrier mds${MDTIDX}
+ create_remote_dir_files_22 || error "Remote creation failed $?"
+ fail mds${MDTIDX}
+
+ checkstat_22 || error "check stat failed $?"
+
+ rm -rf $MOUNT1/$tdir || error "rmdir remote_dir failed"
+ return 0
+}
+run_test 22a "c1 lfs mkdir -i 1 dir1, M0 drop reply & fail, c2 mkdir dir1/dir"
+
+test_22b () {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
+ local MDTIDX=1
+ local remote_dir=$tdir/remote_dir
+
+ # OBD_FAIL_MDS_REINT_NET_REP 0x119
+ do_node $CLIENT1 mkdir -p $MOUNT1/${tdir}
+
+ do_facet mds${MDTIDX} lctl set_param fail_loc=0x119
+ do_node $CLIENT1 $LFS mkdir -i $MDTIDX $MOUNT1/$remote_dir &
+ CLIENT_PID=$!
+ do_facet mds${MDTIDX} lctl set_param fail_loc=0
+
+ fail mds${MDTIDX},mds$((MDTIDX + 1))
+ wait $CLIENT_PID || error "lfs mkdir failed"
+
+ replay_barrier mds$MDTIDX
+ create_remote_dir_files_22 || error "Remote creation failed $?"
+ fail mds${MDTIDX}
+
+ checkstat_22 || error "check stat failed $?"
+
+ rm -rf $MOUNT1/$tdir || error "rmdir remote_dir failed"
+ return 0
+}
+run_test 22b "c1 lfs mkdir -i 1 d1, M0 drop reply & fail M0/M1, c2 mkdir d1/dir"
+
+test_22c () {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
+ ([ $FAILURE_MODE == "HARD" ] &&
+ [ "$(facet_host mds1)" == "$(facet_host mds2)" ]) &&
+ skip "MDTs needs to be on diff hosts for HARD fail mode" &&
+ return 0
+ local MDTIDX=1
+ local remote_dir=${tdir}/remote_dir
+
+ do_node $CLIENT1 mkdir -p $MOUNT1/${tdir}
+
+ # OBD_FAIL_MDS_DROP_OBJ_UPDATE 0x188
+ do_facet mds$((MDTIDX + 1)) lctl set_param fail_loc=0x188
+ do_node $CLIENT1 $LFS mkdir -i $MDTIDX $MOUNT1/$remote_dir &
+ CLIENT_PID=$!
+ do_facet mds$((MDTIDX + 1)) lctl set_param fail_loc=0
+
+ fail mds$((MDTIDX+1))
+ wait $CLIENT_PID || error "lfs mkdir failed"
+
+ replay_barrier mds$MDTIDX
+ create_remote_dir_files_22 || error "Remote creation failed $?"
+ fail mds$MDTIDX
+
+ checkstat_22 || error "check stat failed $?"
+
+ rm -rf $MOUNT1/$tdir || error "rmdir remote_dir failed"
+ return 0
+}
+run_test 22c "c1 lfs mkdir -i 1 d1, M1 drop update & fail M1, c2 mkdir d1/dir"
+
+test_22d () {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
+ local MDTIDX=1
+ local remote_dir=${tdir}/remote_dir
+
+ do_node $CLIENT1 mkdir -p $MOUNT1/${tdir}
+
+ # OBD_FAIL_MDS_DROP_OBJ_UPDATE 0x188
+ do_facet mds$((MDTIDX + 1)) lctl set_param fail_loc=0x188
+ do_node $CLIENT1 $LFS mkdir -i $MDTIDX $MOUNT1/$remote_dir &
+ CLIENT_PID=$!
+ do_facet mds$((MDTIDX + 1)) lctl set_param fail_loc=0
+
+ fail mds${MDTIDX},mds$((MDTIDX + 1))
+ wait $CLIENT_PID || error "lfs mkdir failed"
+
+ replay_barrier mds$MDTIDX
+ create_remote_dir_files_22 || error "Remote creation failed $?"
+ fail mds$MDTIDX
+
+ checkstat_22 || error "check stat failed $?"
+
+ rm -rf $MOUNT1/$tdir || error "rmdir remote_dir failed"
+ return 0
+}
+run_test 22d "c1 lfs mkdir -i 1 d1, M1 drop update & fail M0/M1,c2 mkdir d1/dir"
+
+checkstat_23() {
+ checkstat $MOUNT1/$remote_dir || return 1
+ checkstat $MOUNT1/$remote_dir/$tfile-1 || return 2
+ return 0
+}
+
+create_remote_dir_files_23() {
+ do_node $CLIENT2 mkdir ${MOUNT2}/$remote_dir || return 1
+ do_node $CLIENT2 createmany -o $MOUNT2/$remote_dir/$tfile- 2 || return 2
+ return 0
+}
+
+test_23a () {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
+ ([ $FAILURE_MODE == "HARD" ] &&
+ [ "$(facet_host mds1)" == "$(facet_host mds2)" ]) &&
+ skip "MDTs needs to be on diff hosts for HARD fail mode" &&
+ return 0
+ local MDTIDX=1
+ local remote_dir=$tdir/remote_dir
+
+ do_node $CLIENT1 mkdir -p $MOUNT1/${tdir}
+ do_node $CLIENT1 $LFS mkdir -i $MDTIDX $MOUNT1/$remote_dir ||
+ error "lfs mkdir failed"
+ # OBD_FAIL_MDS_REINT_NET_REP 0x119
+ do_facet mds$((MDTIDX + 1)) lctl set_param fail_loc=0x119
+ do_node $CLIENT1 rmdir $MOUNT1/$remote_dir &
+ local CLIENT_PID=$!
+ do_facet mds$((MDTIDX + 1)) lctl set_param fail_loc=0
+
+ fail mds$((MDTIDX + 1))
+ wait $CLIENT_PID || error "rmdir remote dir failed"
+
+ replay_barrier mds${MDTIDX}
+ create_remote_dir_files_23 || error "Remote creation failed $?"
+ fail mds${MDTIDX}
+
+ checkstat_23 || error "check stat failed $?"
+
+ rm -rf $MOUNT1/$tdir || error "rmdir remote_dir failed"
+ return 0
+}
+run_test 23a "c1 rmdir d1, M1 drop reply and fail, client2 mkdir d1"
+
+test_23b () {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
+ local MDTIDX=1
+ local remote_dir=$tdir/remote_dir
+
+ do_node $CLIENT1 mkdir -p $MOUNT1/${tdir}
+ do_node $CLIENT1 $LFS mkdir -i $MDTIDX $MOUNT1/$remote_dir ||
+ error "lfs mkdir failed"
+
+ # OBD_FAIL_MDS_REINT_NET_REP 0x119
+ do_facet mds$((MDTIDX + 1)) lctl set_param fail_loc=0x119
+ do_node $CLIENT1 rmdir $MOUNT1/$remote_dir &
+ local CLIENT_PID=$!
+ do_facet mds$((MDTIDX + 1)) lctl set_param fail_loc=0
+
+ fail mds${MDTIDX},mds$((MDTIDX + 1))
+ wait $CLIENT_PID || error "rmdir remote dir failed"
+
+ replay_barrier mds${MDTIDX}
+ create_remote_dir_files_23 || error "Remote creation failed $?"
+ fail mds${MDTIDX}
+
+ checkstat_23 || error "check stat failed $?"
+
+ rm -rf $MOUNT1/$tdir || error "rmdir remote_dir failed"
+ return 0
+}
+run_test 23b "c1 rmdir d1, M1 drop reply and fail M0/M1, c2 mkdir d1"
+
+test_23c () {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
+
+ ([ $FAILURE_MODE == "HARD" ] &&
+ [ "$(facet_host mds1)" == "$(facet_host mds2)" ]) &&
+ skip "MDTs needs to be on diff hosts for HARD fail mode" &&
+ return 0
+ local MDTIDX=1
+ local remote_dir=$tdir/remote_dir
+
+ do_node $CLIENT1 mkdir -p $MOUNT1/${tdir}
+ do_node $CLIENT1 $LFS mkdir -i $MDTIDX $MOUNT1/$remote_dir ||
+ error "lfs mkdir failed"
+
+ # OBD_FAIL_MDS_DROP_OBJ_UPDATE 0x188
+ do_facet mds${MDTIDX} lctl set_param fail_loc=0x188
+ do_node $CLIENT1 rmdir $MOUNT1/$remote_dir &
+ CLIENT_PID=$!
+ do_facet mds${MDTIDX} lctl set_param fail_loc=0
+
+ fail mds${MDTIDX}
+ wait $CLIENT_PID || error "rmdir remote dir failed"
+
+ replay_barrier mds${MDTIDX}
+ create_remote_dir_files_23 || error "Remote creation failed $?"
+ fail mds${MDTIDX}
+
+ checkstat_23 || error "check stat failed $?"
+
+ rm -rf $MOUNT1/$tdir || return 6
+ return 0
+}
+run_test 23c "c1 rmdir d1, M0 drop update reply and fail M0, c2 mkdir d1"
+
+test_23d () {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
+ local MDTIDX=1
+ local remote_dir=$tdir/remote_dir
+
+ do_node $CLIENT1 mkdir -p $MOUNT1/${tdir}
+ do_node $CLIENT1 $LFS mkdir -i $MDTIDX $MOUNT1/$remote_dir ||
+ error "lfs mkdir failed"
+
+ # OBD_FAIL_MDS_DROP_OBJ_UPDATE 0x188
+ do_facet mds${MDTIDX} lctl set_param fail_loc=0x188
+ do_node $CLIENT1 rmdir $MOUNT1/$remote_dir &
+ CLIENT_PID=$!
+ do_facet mds${MDTIDX} lctl set_param fail_loc=0
+
+ fail mds${MDTIDX},mds$((MDTIDX + 1))
+ wait $CLIENT_PID || error "rmdir remote dir failed"
+
+ replay_barrier mds${MDTIDX}
+ create_remote_dir_files_23 || error "Remote creation failed $?"
+ fail mds${MDTIDX}
+
+ checkstat_23 || error "check stat failed $?"
+
+ rm -rf $MOUNT1/$tdir || return 6
+ return 0
+}
+run_test 23d "c1 rmdir d1, M0 drop update reply and fail M0/M1, c2 mkdir d1"
+
# end commit on sharing tests
complete $SECONDS
git://git.whamcloud.com / fs / lustre-release.git / blobdiff