+T130_PID=0
+test_130_base() {
+ test_mkdir -p $DIR/$tdir
+
+ # Prevent interference from layout intent RPCs due to
+ # asynchronous writeback. These will be tested in 130c below.
+ do_nodes ${CLIENTS:-$HOSTNAME} sync
+
+ # get only LOOKUP lock on $tdir
+ cancel_lru_locks mdc
+ ls $DIR/$tdir/$tfile 2>/dev/null
+
+ # get getattr by fid on $tdir
+ #
+ # we need to race with unlink, unlink must complete before we will
+ # take a DLM lock, otherwise unlink will wait until getattr will
+ # complete; but later than getattr starts so that getattr found
+ # the object
+#define OBD_FAIL_MDS_INTENT_DELAY 0x160
+ set_nodes_failloc "$(mdts_nodes)" 0x80000160
+ stat $DIR/$tdir &
+ T130_PID=$!
+ sleep 2
+
+ rm -rf $DIR/$tdir
+
+ # drop the reply so that resend happens on an unlinked file.
+#define OBD_FAIL_MDS_LDLM_REPLY_NET 0x157
+ set_nodes_failloc "$(mdts_nodes)" 0x80000157
+}
+
+test_130a() {
+ remote_mds_nodsh && skip "remote MDS with nodsh"
+ [[ "$MDS1_VERSION" -ge $(version_code 2.7.2) ]] ||
+ skip "Need server version newer than 2.7.1"
+
+ test_130_base
+
+ wait $T130_PID || [ $? -eq 0 ] && error "stat should fail"
+ return 0
+}
+run_test 130a "enqueue resend on not existing file"
+
+test_130b() {
+ remote_mds_nodsh && skip "remote MDS with nodsh"
+ [[ "$MDS1_VERSION" -ge $(version_code 2.7.2) ]] ||
+ skip "Need server version newer than 2.7.1"
+
+ test_130_base
+ # let the reply to be dropped
+ sleep 10
+
+#define OBD_FAIL_SRV_ENOENT 0x217
+ set_nodes_failloc "$(mdts_nodes)" 0x80000217
+
+ wait $T130_PID || [ $? -eq 0 ] && error "stat should fail"
+ return 0
+}
+run_test 130b "enqueue resend on a stale inode"
+
+test_130c() {
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+
+ do_nodes ${CLIENTS:-$HOSTNAME} sync
+ echo XXX > $DIR/$tfile
+
+ cancel_lru_locks mdc
+
+ # Trigger writeback on $tfile.
+ #
+ # we need to race with unlink, unlink must complete before we will
+ # take a DLM lock, otherwise unlink will wait until intent will
+ # complete; but later than intent starts so that intent found
+ # the object
+#define OBD_FAIL_MDS_INTENT_DELAY 0x160
+ set_nodes_failloc "$(mdts_nodes)" 0x80000160
+ sync &
+ T130_PID=$!
+ sleep 2
+
+ rm $DIR/$tfile
+
+ # drop the reply so that resend happens on an unlinked file.
+#define OBD_FAIL_MDS_LDLM_REPLY_NET 0x157
+ set_nodes_failloc "$(mdts_nodes)" 0x80000157
+
+ # let the reply to be dropped
+ sleep 10
+
+#define OBD_FAIL_SRV_ENOENT 0x217
+ set_nodes_failloc "$(mdts_nodes)" 0x80000217
+
+ wait $T130_PID
+
+ return 0
+}
+run_test 130c "layout intent resend on a stale inode"
+
+test_132() {
+ local before=$(date +%s)
+ local evict
+
+ mount_client $MOUNT2 || error "mount filed"
+
+ rm -f $DIR/$tfile
+ # get a lock on client so that export would reach the stale list
+ $LFS setstripe -i 0 $DIR/$tfile || error "setstripe failed"
+ dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1 conv=fsync ||
+ error "dd failed"
+
+ #define OBD_FAIL_OST_PAUSE_PUNCH 0x236
+ do_facet ost1 $LCTL set_param fail_val=120 fail_loc=0x80000236
+
+ $TRUNCATE $DIR/$tfile 100 &
+
+ sleep 1
+ dd if=/dev/zero of=$DIR2/$tfile bs=4096 count=1 conv=notrunc ||
+ error "dd failed"
+
+ wait
+ umount_client $MOUNT2
+
+ evict=$(do_facet client $LCTL get_param \
+ osc.$FSNAME-OST0000-osc-*/state |
+ awk -F"[ [,]" '/EVICTED ]$/ { if (t<$5) {t=$5;} } END { print t }')
+
+ [ -z "$evict" ] || [[ $evict -le $before ]] ||
+ (do_facet client $LCTL get_param \
+ osc.$FSNAME-OST0000-osc-*/state;
+ error "eviction happened: $evict before:$before")
+}
+run_test 132 "long punch"
+
+test_131() {
+ remote_ost_nodsh && skip "remote OST with nodsh" && return 0
+
+ rm -f $DIR/$tfile
+ # get a lock on client so that export would reach the stale list
+ $LFS setstripe -i 0 $DIR/$tfile || error "setstripe failed"
+ dd if=/dev/zero of=$DIR/$tfile count=1 || error "dd failed"
+
+ # another IO under the same lock
+ #define OBD_FAIL_OSC_DELAY_IO 0x414
+ $LCTL set_param fail_loc=0x80000414
+ $LCTL set_param fail_val=4 fail_loc=0x80000414
+ dd if=/dev/zero of=$DIR/$tfile count=1 conv=notrunc oflag=dsync &
+ local pid=$!
+ sleep 1
+
+ #define OBD_FAIL_LDLM_BL_EVICT 0x31e
+ set_nodes_failloc "$(osts_nodes)" 0x8000031e
+ ost_evict_client
+ client_reconnect
+
+ wait $pid && error "dd succeeded"
+ return 0
+}
+run_test 131 "IO vs evict results to IO under staled lock"
+
+test_133() {
+ local list=$(comma_list $(mdts_nodes))
+
+ local t=$((TIMEOUT * 2))
+ touch $DIR/$tfile
+
+ flock $DIR/$tfile -c "echo bl lock;sleep $t;echo bl flock unlocked" &
+ sleep 1
+ multiop_bg_pause $DIR/$tfile O_jc || return 1
+ PID=$!
+
+ #define OBD_FAIL_MDS_LDLM_REPLY_NET 0x157
+ do_nodes $list $LCTL set_param fail_loc=0x80000157
+ kill -USR1 $PID
+ echo "waiting for multiop $PID"
+ wait $PID || return 2
+
+ rm -f $DIR/$tfile
+
+ return 0
+}
+run_test 133 "don't fail on flock resend"
+
+test_134() {
+ [ -z "$CLIENTS" ] && skip "Need two or more clients" && return
+ [ $CLIENTCOUNT -lt 2 ] &&
+ { skip "Need 2+ clients, have $CLIENTCOUNT" && return; }
+
+ mkdir -p $MOUNT/$tdir/1 $MOUNT/$tdir/2 || error "mkdir failed"
+ touch $MOUNT/$tdir/1/$tfile $MOUNT/$tdir/2/$tfile ||
+ error "touch failed"
+ zconf_umount_clients $CLIENTS $MOUNT
+ zconf_mount_clients $CLIENTS $MOUNT
+
+#define OBD_FAIL_TGT_REPLY_DATA_RACE 0x722
+ # assume commit interval is 5
+ do_facet mds1 "$LCTL set_param fail_loc=0x722 fail_val=5"
+
+ local -a clients=(${CLIENTS//,/ })
+ local client1=${clients[0]}
+ local client2=${clients[1]}
+
+ do_node $client1 rm $MOUNT/$tdir/1/$tfile &
+ rmpid=$!
+ do_node $client2 mv $MOUNT/$tdir/2/$tfile $MOUNT/$tdir/2/${tfile}_2 &
+ mvpid=$!
+ fail mds1
+ wait $rmpid || error "rm failed"
+ wait $mvpid || error "mv failed"
+ return 0
+}
+run_test 134 "race between failover and search for reply data free slot"
+
+test_135() {
+ [ "$MDS1_VERSION" -lt $(version_code 2.12.51) ] &&
+ skip "Need MDS version at least 2.12.51"
+
+ mkdir -p $DIR/$tdir
+ $LFS setstripe -E 1M -L mdt $DIR/$tdir
+ # to have parent dir write lock before open/resend
+ touch $DIR/$tdir/$tfile
+ #define OBD_FAIL_MDS_LDLM_REPLY_NET 0x157
+ do_nodes $(comma_list $(mdts_nodes)) $LCTL set_param fail_loc=0x80000157
+ openfile -f O_RDWR:O_CREAT -m 0755 $DIR/$tdir/$tfile ||
+ error "Failed to open DOM file"
+}
+run_test 135 "DOM: open/create resend to return size"
+
+test_136() {
+ remote_mds_nodsh && skip "remote MDS with nodsh"
+ [[ "$MDS1_VERSION" -ge $(version_code 2.12.52) ]] ||
+ skip "Need MDS version at least 2.12.52"
+
+ local mdts=$(comma_list $(mdts_nodes))
+ local MDT0=$(facet_svc $SINGLEMDS)
+
+ local clog=$(do_facet mds1 $LCTL --device $MDT0 changelog_register -n)
+ [ -n "$clog" ] || error "changelog_register failed"
+ cl_mask=$(do_facet mds1 $LCTL get_param \
+ mdd.$MDT0.changelog_mask -n)
+ changelog_chmask "ALL"
+
+ # generate some changelog records to accumulate
+ test_mkdir -i 0 -c 0 $DIR/$tdir || error "mkdir $tdir failed"
+ createmany -m $DIR/$tdir/$tfile 10000 ||
+ error "create $DIR/$tdir/$tfile failed"
+
+ local size1=$(do_facet $SINGLEMDS \
+ $LCTL get_param -n mdd.$MDT0.changelog_size)
+ echo "Changelog size $size1"
+
+ #define OBD_FAIL_LLOG_PURGE_DELAY 0x1318
+ do_nodes $mdts $LCTL set_param fail_loc=0x1318 fail_val=30
+
+ # launch changelog_deregister in background on MDS
+ do_facet mds1 "nohup $LCTL --device $MDT0 changelog_deregister $clog \
+ > foo.out 2> foo.err < /dev/null &"
+ # give time to reach fail_loc
+ sleep 15
+
+ # fail_loc will make MDS sleep in the middle of changelog_deregister
+ # take this opportunity to abruptly kill MDS
+ FAILURE_MODE_save=$FAILURE_MODE
+ FAILURE_MODE=HARD
+ fail mds1
+ FAILURE_MODE=$FAILURE_MODE_save
+
+ do_nodes $mdts $LCTL set_param fail_loc=0x0 fail_val=0
+
+ local size2=$(do_facet $SINGLEMDS \
+ $LCTL get_param -n mdd.$MDT0.changelog_size)
+ echo "Changelog size $size2"
+ local clog2=$(do_facet $SINGLEMDS "$LCTL get_param -n \
+ mdd.$MDT0.changelog_users | grep $clog")
+ echo "After crash, changelog user $clog2"
+
+ [ -n "$clog2" -o $size2 -lt $size1 ] ||
+ error "changelog record count unchanged"
+
+ do_facet mds1 $LCTL set_param mdd.$MDT0.changelog_mask=\'$cl_mask\' -n
+}
+run_test 136 "changelog_deregister leaving pending records"
+
+test_137() {
+ df $DIR
+ mkdir -p $DIR/d1
+ mkdir -p $DIR/d2
+ dd if=/dev/zero of=$DIR/d1/$tfile bs=4096 count=1
+ dd if=/dev/zero of=$DIR/d2/$tfile bs=4096 count=1
+ cancel_lru_locks osc
+
+ #define OBD_FAIL_PTLRPC_RESEND_RACE 0x525
+ do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000525"
+
+ # RPC1: any reply is to be delayed to disable last_xid logic
+ ln $DIR/d1/$tfile $DIR/d1/f2 &
+ sleep 1
+
+ # RPC2: setattr1 reply is delayed & resent
+ # original reply comes to client; the resend get asleep
+ chmod 666 $DIR/d2/$tfile
+
+ # RPC3: setattr2 on the same file; run ahead of RPC2 resend
+ chmod 777 $DIR/d2/$tfile
+
+ # RPC2 resend wakes up
+ sleep 5
+ [ $(stat -c "%a" $DIR/d2/$tfile) == 777 ] || error "resend got applied"
+}
+run_test 137 "late resend must be skipped if already applied"
+
+test_138() {
+ remote_mds_nodsh && skip "remote MDS with nodsh"
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
+ [[ "$MDS1_VERSION" -ge $(version_code 2.12.59) ]] ||
+ skip "Need server version newer than 2.12.59"
+
+ zconf_umount_clients $CLIENTS $MOUNT
+
+#define OBD_FAIL_TGT_RECOVERY_CONNECT 0x724
+ #delay a first step of recovey when MDS waiting clients
+ #and failing to get osp logs
+ do_facet $SINGLEMDS $LCTL set_param fail_loc=0x724 fail_val=5
+
+ facet_failover $SINGLEMDS
+
+ #waiting failover and recovery timer
+ #the valuse is based on target_recovery_overseer() wait_event timeout
+ sleep 55
+ stop $SINGLEMDS || error "stop MDS failed"
+ do_facet $SINGLEMDS $LCTL set_param fail_loc=0
+ start $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) $MDS_MOUNT_OPTS ||
+ error "start MDS failed"
+ zconf_mount_clients $CLIENTS $MOUNT
+}
+run_test 138 "Umount MDT during recovery"
+
+test_139() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
+ [ $MDS1_VERSION -lt $(version_code 2.13.50) ] &&
+ skip "Need MDS version at least 2.13.50"
+
+ mdt_dev=$(mdsdevname 1)
+
+ stop $SINGLEMDS || error "stop $SINGLEMDS failed"
+
+#define OBD_FAIL_OSP_INVALID_LOGID 0x2106
+ do_facet $SINGLEMDS $LCTL set_param fail_val=0x68 fail_loc=0x80002106
+ start $SINGLEMDS $mdt_dev $MDS_MOUNT_OPTS || error "Fail to start MDT"
+}
+run_test 139 "corrupted catid won't cause crash"
+
+test_140a() {
+ [ $MDS1_VERSION -lt $(version_code 2.12.58) ] &&
+ skip "Need MDS version at least 2.13.50"
+
+ [ "$SHARED_KEY" = true ] &&
+ skip "server local client incompatible with SSK keys installed"
+
+ slr=$(do_facet mds1 \
+ $LCTL get_param -n mdt.$FSNAME-MDT0000.local_recovery)
+ stack_trap "do_facet mds1 $LCTL set_param \
+ mdt.*.local_recovery=$slr" EXIT
+
+ # disable recovery for local clients
+ # so local clients should be marked with no_recovery flag
+ do_facet mds1 $LCTL set_param mdt.*.local_recovery=0
+ mount_mds_client
+
+ local cnt
+ cnt=$(do_facet mds1 $LCTL get_param "mdt.*MDT0000.exports.*.export" |
+ grep export_flags.*no_recovery | wc -l)
+ echo "$cnt clients with recovery disabled"
+ umount_mds_client
+ [ $cnt -eq 0 ] && error "no clients with recovery disabled"
+
+ # enable recovery for local clients
+ # so no local clients should be marked with no_recovery flag
+ do_facet mds1 $LCTL set_param mdt.*.local_recovery=1
+ mount_mds_client
+
+ cnt=$(do_facet mds1 $LCTL get_param "mdt.*MDT0000.exports.*.export" |
+ grep export_flags.*no_recovery | wc -l)
+ echo "$cnt clients with recovery disabled"
+ umount_mds_client
+ [ $cnt -eq 0 ] || error "$cnt clients with recovery disabled"
+}
+run_test 140a "local mount is flagged properly"
+
+test_140b() {
+ [ $MDS1_VERSION -lt $(version_code 2.12.58) ] &&
+ skip "Need MDS version at least 2.13.50"
+
+ [ "$SHARED_KEY" = true ] &&
+ skip "server local client incompatible with SSK keys installed"
+
+ slr=$(do_facet mds1 \
+ $LCTL get_param -n mdt.$FSNAME-MDT0000.local_recovery)
+ stack_trap "do_facet mds1 $LCTL set_param \
+ mdt.*.local_recovery=$slr" EXIT
+
+ # disable recovery for local clients
+ do_facet mds1 $LCTL set_param mdt.*.local_recovery=0
+
+ mount_mds_client
+ replay_barrier mds1
+ umount_mds_client
+ fail mds1
+ # Lustre: tfs-MDT0000: Recovery over after 0:03, of 2 clients 2 rec...
+ local recovery=$(do_facet mds1 dmesg |
+ awk '/Recovery over after/ { print $6 }' | tail -1 |
+ awk -F: '{ print $1 * 60 + $2 }')
+ (( recovery < TIMEOUT * 2 + 5 )) ||
+ error "recovery took too long $recovery > $((TIMEOUT * 2 + 5))"
+}
+run_test 140b "local mount is excluded from recovery"
+
+test_141() {
+ local oldc
+ local newc
+
+ [ $PARALLEL == "yes" ] && skip "skip parallel run"
+ combined_mgs_mds || skip "needs combined MGS/MDT"
+ ( local_mode || from_build_tree ) &&
+ skip "cannot run in local mode or from build tree"
+
+ # some get_param have a bug to handle dot in param name
+ do_rpc_nodes $(facet_active_host $SINGLEMDS) cancel_lru_locks MGC
+ oldc=$(do_facet $SINGLEMDS $LCTL get_param -n \
+ 'ldlm.namespaces.MGC*.lock_count')
+ fail $SINGLEMDS
+ do_rpc_nodes $(facet_active_host $SINGLEMDS) cancel_lru_locks MGC
+ newc=$(do_facet $SINGLEMDS $LCTL get_param -n \
+ 'ldlm.namespaces.MGC*.lock_count')
+
+ [ $oldc -eq $newc ] || error "mgc lost locks ($oldc != $newc)"
+ return 0
+}
+run_test 141 "do not lose locks on MGS restart"
+
+test_142() {
+ [ $MDS1_VERSION -lt $(version_code 2.11.56) ] &&
+ skip "Need MDS version at least 2.11.56"
+
+ #define OBD_FAIL_MDS_ORPHAN_DELETE 0x165
+ do_facet mds1 $LCTL set_param fail_loc=0x165
+ $MULTIOP $DIR/$tfile Ouc || error "multiop failed"
+
+ stop mds1
+ start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS
+
+ wait_update_facet mds1 "pgrep orph_.*-MDD | wc -l" "0" ||
+ error "MDD orphan cleanup thread not quit"
+}
+run_test 142 "orphan name stub can be cleaned up in startup"
+
+test_143() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.13.00) ] &&
+ skip "Need MDS version at least 2.13.00"
+ [ $PARALLEL == "yes" ] && skip "skip parallel run"
+
+ local mntpt=$(facet_mntpt $SINGLEMDS)
+ stop mds1
+ mount_fstype $SINGLEMDS || error "mount as fstype $SINGLEMDS failed"
+ do_facet $SINGLEMDS touch $mntpt/PENDING/$tfile
+ unmount_fstype $SINGLEMDS
+ start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS || error "mds1 start fail"
+
+ wait_recovery_complete $SINGLEMDS || error "MDS recovery not done"
+ wait_update_facet mds1 "pgrep orph_.*-MDD | wc -l" "0" ||
+ error "MDD orphan cleanup thread not quit"
+}
+run_test 143 "orphan cleanup thread shouldn't be blocked even delete failed"
+
+test_145() {
+ [ $MDSCOUNT -lt 3 ] && skip "needs >= 3 MDTs"
+ [ $(facet_active_host mds2) = $(facet_active_host mds3) ] &&
+ skip "needs mds2 and mds3 on separate nodes"
+
+ replay_barrier mds1
+
+ touch $DIR/$tfile
+
+#define OBD_FAIL_PTLRPC_DELAY_RECOV 0x507
+ echo block mds_connect from mds2
+ do_facet mds2 "$LCTL set_param fail_loc=0x507"
+
+#define OBD_FAIL_OUT_UPDATE_DROP 0x1707
+ echo block recovery updates from mds3
+ do_facet mds3 "$LCTL set_param fail_loc=0x1707"
+
+ local hard_timeout=\
+$(do_facet mds1 $LCTL get_param -n mdt.$FSNAME-MDT0000.recovery_time_hard)
+
+ fail mds1 &
+
+ local get_soft_timeout_cmd=\
+"$LCTL get_param -n mdt.$FSNAME-MDT0000.recovery_time_soft 2>/dev/null"
+
+ echo wait until mds1 recovery_time_soft is $hard_timeout
+ wait_update $(facet_host mds1) "$get_soft_timeout_cmd" \
+"$hard_timeout" $hard_timeout
+
+ echo unblock mds_connect from mds2
+ do_facet mds2 "$LCTL set_param fail_loc=0"
+
+ echo upblock recovery updates from mds3
+ do_facet mds3 "$LCTL set_param fail_loc=0"
+
+ wait
+ [ -f $DIR/$tfile ] || error "$DIR/$tfile does not exist"
+}
+run_test 145 "connect mdtlovs and process update logs after recovery expire"
+
+test_147() {
+ local obd_timeout=200
+ local old=$($LCTL get_param -n timeout)
+ local f=$DIR/$tfile
+ local connection_count
+
+ $LFS setstripe -i 0 -c 1 $f
+ stripe_index=$($LFS getstripe -i $f)
+ if [ $stripe_index -ne 0 ]; then
+ $LFS getstripe $f
+ error "$f: stripe_index $stripe_index != 0" && return
+ fi
+
+ $LCTL set_param timeout=$obd_timeout
+ stack_trap "$LCTL set_param timeout=$old && client_reconnect" EXIT
+
+ # OBD_FAIL_OST_CONNECT_NET2
+ # lost reply to connect request
+ do_facet ost1 lctl set_param fail_loc=0x00000225 timeout=$obd_timeout
+ stack_trap "do_facet ost1 $LCTL set_param fail_loc=0 timeout=$old" EXIT
+
+
+ ost_evict_client
+ # force reconnect
+ $LFS df $MOUNT > /dev/null 2>&1 &
+ sleep $((obd_timeout * 3 / 4))
+
+ $LCTL get_param osc.$FSNAME-OST0000-osc-*.state
+ connection_count=$($LCTL get_param osc.$FSNAME-OST0000-osc-*.state |
+ tac | sed "/FULL/,$ d" | grep CONNECTING | wc -l)
+
+ echo $connection_count
+ (($connection_count >= 6)) || error "Client reconnected too slow"
+}
+run_test 147 "Check client reconnect"
+
+test_148() {
+ local wce_param="obdfilter.$FSNAME-OST0000.writethrough_cache_enable"
+ local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
+ local amc=$(at_max_get client)
+ local amo=$(at_max_get ost1)
+ local timeout
+
+ at_max_set 0 client
+ at_max_set 0 ost1
+ timeout=$(request_timeout client)
+
+ [ "$(facet_fstype ost1)" = "ldiskfs" ] && {
+ # save old r/o cache settings
+ save_lustre_params ost1 $wce_param > $p
+
+ # disable r/o cache
+ do_facet ost1 "$LCTL set_param -n $wce_param=0"
+ }
+
+ $LFS setstripe -i 0 -c 1 $DIR/$tfile
+ dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1 oflag=direct
+ cp $DIR/$tfile $TMP/$tfile
+ #define OBD_FAIL_OST_BRW_PAUSE_BULK2 0x227
+ do_facet ost1 $LCTL set_param fail_loc=0x80000227
+ do_facet ost1 $LCTL set_param fail_val=$((timeout+2))
+ dd if=/dev/urandom of=$DIR/$tfile bs=4096 count=1 conv=notrunc,fdatasync
+ dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1 conv=notrunc,fdatasync
+ sleep 2
+ cancel_lru_locks osc
+ cmp -b $DIR/$tfile $TMP/$tfile || error "wrong data"
+
+ rm -f $DIR/$tfile $TMP/$tfile
+
+ at_max_set $amc client
+ at_max_set $amo ost1
+
+ [ "$(facet_fstype ost1)" = "ldiskfs" ] && {
+ # restore initial r/o cache settings
+ restore_lustre_params < $p
+ }
+
+ return 0
+}
+run_test 148 "data corruption through resend"
+