init_test_env $@
. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
+if [ "$FAILURE_MODE" = "HARD" ] && mixed_ost_devs; then
+ CONFIG_EXCEPTIONS="52"
+ echo -n "Several ost services on one ost node are used with FAILURE_MODE=$FAILURE_MODE. "
+ echo "Except the tests: $CONFIG_EXCEPTIONS"
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT $CONFIG_EXCEPTIONS"
+fi
+
+remote_mds_nodsh && skip "remote MDS with nodsh" && exit 0
+
# also long tests: 19, 21a, 21e, 21f, 23, 27
# 1 2.5 2.5 4 4 (min)"
[ "$SLOW" = "no" ] && EXCEPT_SLOW="17 26a 26b 50 51 57"
SETUP=${SETUP:-""}
CLEANUP=${CLEANUP:-""}
-cleanup_and_setup_lustre
+check_and_setup_lustre
+
assert_DIR
rm -rf $DIR/[df][0-9]*
-SAMPLE_NAME=recovery-small.junk
-SAMPLE_FILE=$TMP/$SAMPLE_NAME
-# make this big, else test 9 doesn't wait for bulk -- bz 5595
-dd if=/dev/urandom of=$SAMPLE_FILE bs=1M count=4
-
test_1() {
- drop_request "mcreate $MOUNT/1" || return 1
- drop_reint_reply "mcreate $MOUNT/2" || return 2
+ drop_request "mcreate $DIR/f1" || return 1
+ drop_reint_reply "mcreate $DIR/f2" || return 2
}
run_test 1 "mcreate: drop req, drop rep"
test_2() {
- drop_request "tchmod 111 $MOUNT/2" || return 1
- drop_reint_reply "tchmod 666 $MOUNT/2" || return 2
+ drop_request "tchmod 111 $DIR/f2" || return 1
+ drop_reint_reply "tchmod 666 $DIR/f2" || return 2
}
run_test 2 "chmod: drop req, drop rep"
test_3() {
- drop_request "statone $MOUNT/2" || return 1
- drop_reply "statone $MOUNT/2" || return 2
+ drop_request "statone $DIR/f2" || return 1
+ drop_reply "statone $DIR/f2" || return 2
}
run_test 3 "stat: drop req, drop rep"
+SAMPLE_NAME=f0.recovery-small.junk
+SAMPLE_FILE=$TMP/$SAMPLE_NAME
+# make this big, else test 9 doesn't wait for bulk -- bz 5595
+dd if=/dev/urandom of=$SAMPLE_FILE bs=1M count=4
+
test_4() {
- do_facet client "cp /etc/inittab $MOUNT/inittab" || return 1
- drop_request "cat $MOUNT/inittab > /dev/null" || return 2
- drop_reply "cat $MOUNT/inittab > /dev/null" || return 3
+ do_facet client "cp $SAMPLE_FILE $DIR/$SAMPLE_NAME" || return 1
+ drop_request "cat $DIR/$SAMPLE_NAME > /dev/null" || return 2
+ drop_reply "cat $DIR/$SAMPLE_NAME > /dev/null" || return 3
}
run_test 4 "open: drop req, drop rep"
+RENAMED_AGAIN=$DIR/f0.renamed-again
+
test_5() {
- drop_request "mv $MOUNT/inittab $MOUNT/renamed" || return 1
- drop_reint_reply "mv $MOUNT/renamed $MOUNT/renamed-again" || return 2
- do_facet client "checkstat -v $MOUNT/renamed-again" || return 3
+ drop_request "mv $DIR/$SAMPLE_NAME $DIR/$tfile-renamed" || return 1
+ drop_reint_reply "mv $DIR/$tfile-renamed $RENAMED_AGAIN" || return 2
+ do_facet client "checkstat -v $RENAMED_AGAIN" || return 3
}
run_test 5 "rename: drop req, drop rep"
-[ ! -e $MOUNT/renamed-again ] && cp /etc/inittab $MOUNT/renamed-again
+[ ! -e $RENAMED_AGAIN ] && cp $SAMPLE_FILE $RENAMED_AGAIN
+LINK1=$DIR/f0.link1
+LINK2=$DIR/f0.link2
+
test_6() {
- drop_request "mlink $MOUNT/renamed-again $MOUNT/link1" || return 1
- drop_reint_reply "mlink $MOUNT/renamed-again $MOUNT/link2" || return 2
+ drop_request "mlink $RENAMED_AGAIN $LINK1" || return 1
+ drop_reint_reply "mlink $RENAMED_AGAIN $LINK2" || return 2
}
run_test 6 "link: drop req, drop rep"
-[ ! -e $MOUNT/link1 ] && mlink $MOUNT/renamed-again $MOUNT/link1
-[ ! -e $MOUNT/link2 ] && mlink $MOUNT/renamed-again $MOUNT/link2
+[ ! -e $LINK1 ] && mlink $RENAMED_AGAIN $LINK1
+[ ! -e $LINK2 ] && mlink $RENAMED_AGAIN $LINK2
test_7() {
- drop_request "munlink $MOUNT/link1" || return 1
- drop_reint_reply "munlink $MOUNT/link2" || return 2
+ drop_request "munlink $LINK1" || return 1
+ drop_reint_reply "munlink $LINK2" || return 2
}
run_test 7 "unlink: drop req, drop rep"
#bug 1423
test_8() {
- drop_reint_reply "touch $MOUNT/$tfile" || return 1
+ drop_reint_reply "touch $DIR/$tfile" || return 1
}
run_test 8 "touch: drop rep (bug 1423)"
#bug 1420
test_9() {
- pause_bulk "cp /etc/profile $MOUNT/$tfile" || return 1
- do_facet client "cp ${SAMPLE_FILE} $MOUNT/${tfile}.2" || return 2
+ remote_ost_nodsh && skip "remote OST with nodsh" && return 0
+
+ pause_bulk "cp /etc/profile $DIR/$tfile" || return 1
+ do_facet client "cp $SAMPLE_FILE $DIR/${tfile}.2" || return 2
do_facet client "sync"
- do_facet client "rm $MOUNT/$tfile $MOUNT/${tfile}.2" || return 3
+ do_facet client "rm $DIR/$tfile $DIR/${tfile}.2" || return 3
}
run_test 9 "pause bulk on OST (bug 1420)"
#bug 1521
test_10() {
- do_facet client mcreate $MOUNT/$tfile || return 1
- drop_bl_callback "chmod 0777 $MOUNT/$tfile" || echo "evicted as expected"
+ do_facet client mcreate $DIR/$tfile || return 1
+ drop_bl_callback "chmod 0777 $DIR/$tfile" || echo "evicted as expected"
# wait for the mds to evict the client
#echo "sleep $(($TIMEOUT*2))"
#sleep $(($TIMEOUT*2))
- do_facet client touch $MOUNT/$tfile || echo "touch failed, evicted"
- do_facet client checkstat -v -p 0777 $MOUNT/$tfile || return 3
- do_facet client "munlink $MOUNT/$tfile"
+ do_facet client touch $DIR/$tfile || echo "touch failed, evicted"
+ do_facet client checkstat -v -p 0777 $DIR/$tfile || return 3
+ do_facet client "munlink $DIR/$tfile"
}
run_test 10 "finish request on server after client eviction (bug 1521)"
#bug 2460
# wake up a thread waiting for completion after eviction
test_11(){
- do_facet client multiop $MOUNT/$tfile Ow || return 1
- do_facet client multiop $MOUNT/$tfile or || return 2
+ do_facet client multiop $DIR/$tfile Ow || return 1
+ do_facet client multiop $DIR/$tfile or || return 2
cancel_lru_locks osc
- do_facet client multiop $MOUNT/$tfile or || return 3
- drop_bl_callback multiop $MOUNT/$tfile Ow || echo "evicted as expected"
+ do_facet client multiop $DIR/$tfile or || return 3
+ drop_bl_callback multiop $DIR/$tfile Ow || echo "evicted as expected"
- do_facet client munlink $MOUNT/$tfile || return 4
+ do_facet client munlink $DIR/$tfile || return 4
}
run_test 11 "wake up a thread waiting for completion after eviction (b=2460)"
#b=2494
test_12(){
- $LCTL mark multiop $MOUNT/$tfile OS_c
+ $LCTL mark multiop $DIR/$tfile OS_c
do_facet $SINGLEMDS "lctl set_param fail_loc=0x115"
clear_failloc $SINGLEMDS $((TIMEOUT * 2)) &
- multiop_bg_pause $MOUNT/$tfile OS_c || return 1
+ multiop_bg_pause $DIR/$tfile OS_c || return 1
PID=$!
#define OBD_FAIL_MDS_CLOSE_NET 0x115
kill -USR1 $PID
echo "waiting for multiop $PID"
wait $PID || return 2
- do_facet client munlink $MOUNT/$tfile || return 3
+ do_facet client munlink $DIR/$tfile || return 3
}
run_test 12 "recover from timed out resend in ptlrpcd (b=2494)"
# Bug 113, check that readdir lost recv timeout works.
test_13() {
- mkdir $MOUNT/readdir || return 1
- touch $MOUNT/readdir/newentry || return
+ mkdir -p $DIR/$tdir || return 1
+ touch $DIR/$tdir/newentry || return
# OBD_FAIL_MDS_READPAGE_NET|OBD_FAIL_ONCE
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000104"
- ls $MOUNT/readdir || return 3
+ ls $DIR/$tdir || return 3
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
- rm -rf $MOUNT/readdir || return 4
+ rm -rf $DIR/$tdir || return 4
}
run_test 13 "mdc_readpage restart test (bug 1138)"
# Bug 113, check that readdir lost send timeout works.
test_14() {
- mkdir $MOUNT/readdir
- touch $MOUNT/readdir/newentry
+ mkdir -p $DIR/$tdir
+ touch $DIR/$tdir/newentry
# OBD_FAIL_MDS_SENDPAGE|OBD_FAIL_ONCE
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000106"
- ls $MOUNT/readdir || return 1
+ ls $DIR/$tdir || return 1
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
}
run_test 14 "mdc_readpage resend test (bug 1138)"
}
test_16() {
- do_facet client cp /etc/termcap $MOUNT
+ remote_ost_nodsh && skip "remote OST with nodsh" && return 0
+
+ do_facet client cp $SAMPLE_FILE $DIR
sync
stop_read_ahead
do_facet ost1 "lctl set_param fail_loc=0x80000504"
cancel_lru_locks osc
# OST bulk will time out here, client resends
- do_facet client "cmp /etc/termcap $MOUNT/termcap" || return 1
+ do_facet client "cmp $SAMPLE_FILE $DIR/${SAMPLE_FILE##*/}" || return 1
do_facet ost1 lctl set_param fail_loc=0
# give recovery a chance to finish (shouldn't take long)
sleep $TIMEOUT
- do_facet client "cmp /etc/termcap $MOUNT/termcap" || return 2
+ do_facet client "cmp $SAMPLE_FILE $DIR/${SAMPLE_FILE##*/}" || return 2
start_read_ahead
}
run_test 16 "timeout bulk put, don't evict client (2732)"
test_17() {
local at_max_saved=0
+ remote_ost_nodsh && skip "remote OST with nodsh" && return 0
+
# With adaptive timeouts, bulk_get won't expire until adaptive_timeout_max
if at_is_valid && at_is_enabled; then
at_max_saved=$(at_max_get ost1)
test_18a() {
[ -z ${ost2_svc} ] && skip "needs 2 osts" && return 0
- do_facet client mkdir -p $MOUNT/$tdir
- f=$MOUNT/$tdir/$tfile
+ do_facet client mkdir -p $DIR/$tdir
+ f=$DIR/$tdir/$tfile
cancel_lru_locks osc
pgcache_empty || return 1
# 1 stripe on ost2
lfs setstripe $f -s $((128 * 1024)) -i 1 -c 1
+ get_stripe_info client $f
+ if [ $stripe_index -ne 1 ]; then
+ lfs getstripe $f
+ error "$f: different stripe offset ($stripe_index)" && return
+ fi
do_facet client cp $SAMPLE_FILE $f
sync
run_test 18a "manual ost invalidate clears page cache immediately"
test_18b() {
- do_facet client mkdir -p $MOUNT/$tdir
- f=$MOUNT/$tdir/$tfile
- f2=$MOUNT/$tdir/${tfile}-2
+ remote_ost_nodsh && skip "remote OST with nodsh" && return 0
+
+ do_facet client mkdir -p $DIR/$tdir
+ f=$DIR/$tdir/$tfile
cancel_lru_locks osc
pgcache_empty || return 1
# shouldn't have to set stripe size of count==1
lfs setstripe $f -s $((128 * 1024)) -i 0 -c 1
- lfs setstripe $f2 -s $((128 * 1024)) -i 0 -c 1
+ get_stripe_info client $f
+ if [ $stripe_index -ne 0 ]; then
+ lfs getstripe $f
+ error "$f: different stripe offset ($stripe_index)" && return
+ fi
do_facet client cp $SAMPLE_FILE $f
sync
# cache after the client reconnects?
rc=0
pgcache_empty || rc=2
- rm -f $f $f2
+ rm -f $f
return $rc
}
run_test 18b "eviction and reconnect clears page cache (2766)"
test_18c() {
- do_facet client mkdir -p $MOUNT/$tdir
- f=$MOUNT/$tdir/$tfile
- f2=$MOUNT/$tdir/${tfile}-2
+ remote_ost_nodsh && skip "remote OST with nodsh" && return 0
+
+ do_facet client mkdir -p $DIR/$tdir
+ f=$DIR/$tdir/$tfile
cancel_lru_locks osc
pgcache_empty || return 1
# shouldn't have to set stripe size of count==1
lfs setstripe $f -s $((128 * 1024)) -i 0 -c 1
- lfs setstripe $f2 -s $((128 * 1024)) -i 0 -c 1
+ get_stripe_info client $f
+ if [ $stripe_index -ne 0 ]; then
+ lfs getstripe $f
+ error "$f: different stripe offset ($stripe_index)" && return
+ fi
do_facet client cp $SAMPLE_FILE $f
sync
# cache after the client reconnects?
rc=0
pgcache_empty || rc=2
- rm -f $f $f2
+ rm -f $f
return $rc
}
run_test 18c "Dropped connect reply after eviction handing (14755)"
test_19a() {
- f=$MOUNT/$tfile
+ f=$DIR/$tfile
do_facet client mcreate $f || return 1
drop_ldlm_cancel "chmod 0777 $f" || echo "evicted as expected"
run_test 19a "test expired_lock_main on mds (2867)"
test_19b() {
- f=$MOUNT/$tfile
+ f=$DIR/$tfile
do_facet client multiop $f Ow || return 1
do_facet client multiop $f or || return 2
run_test 19b "test expired_lock_main on ost (2867)"
test_20a() { # bug 2983 - ldlm_handle_enqueue cleanup
+ remote_ost_nodsh && skip "remote OST with nodsh" && return 0
+
mkdir -p $DIR/$tdir
lfs setstripe $DIR/$tdir/${tfile} -i 0 -c 1
multiop_bg_pause $DIR/$tdir/${tfile} O_wc || return 1
run_test 20a "ldlm_handle_enqueue error (should return error)"
test_20b() { # bug 2986 - ldlm_handle_enqueue error during open
+ remote_ost_nodsh && skip "remote OST with nodsh" && return 0
+
mkdir -p $DIR/$tdir
lfs setstripe $DIR/$tdir/${tfile} -i 0 -c 1
cancel_lru_locks osc
}
run_test 23 "client hang when close a file after mds crash"
-test_24() { # bug 2248 - eviction fails writeback but app doesn't see it
+test_24() { # bug 11710 details correct fsync() behavior
+ remote_ost_nodsh && skip "remote OST with nodsh" && return 0
+
mkdir -p $DIR/$tdir
+ lfs setstripe $DIR/$tdir -s 0 -i 0 -c 1
cancel_lru_locks osc
multiop_bg_pause $DIR/$tdir/$tfile Owy_wyc || return 1
MULTI_PID=$!
test_26a() { # was test_26 bug 5921 - evict dead exports by pinger
# this test can only run from a client on a separate node.
remote_ost || { skip "local OST" && return 0; }
+ remote_ost_nodsh && skip "remote OST with nodsh" && return 0
remote_mds || { skip "local MDS" && return 0; }
OST_FILE=obdfilter.${ost1_svc}.num_exports
OST_EXP="`do_facet ost1 lctl get_param -n $OST_FILE`"
run_test 26a "evict dead exports"
test_26b() { # bug 10140 - evict dead exports by pinger
+ remote_ost_nodsh && skip "remote OST with nodsh" && return 0
+
client_df
zconf_mount `hostname` $MOUNT2 || error "Failed to mount $MOUNT2"
sleep 1 # wait connections being established
run_test 26b "evict dead exports"
test_27() {
- remote_mds && { skip "remote MDS" && return 0; }
mkdir -p $DIR/$tdir
writemany -q -a $DIR/$tdir/$tfile 0 5 &
CLIENT_PID=$!
sleep 1
+ local save_FAILURE_MODE=$FAILURE_MODE
FAILURE_MODE="SOFT"
facet_failover $SINGLEMDS
#define OBD_FAIL_OSC_SHUTDOWN 0x407
- lctl set_param fail_loc=0x80000407
+ do_facet $SINGLEMDS lctl set_param fail_loc=0x80000407
# need to wait for reconnect
echo -n waiting for fail_loc
- while [ `lctl get_param -n fail_loc` -eq -2147482617 ]; do
+ while [ $(do_facet $SINGLEMDS lctl get_param -n fail_loc) -eq -2147482617 ]; do
sleep 1
echo -n .
done
+ do_facet $SINGLEMDS lctl get_param -n fail_loc
facet_failover $SINGLEMDS
#no crashes allowed!
kill -USR1 $CLIENT_PID
wait $CLIENT_PID
true
+ FAILURE_MODE=$save_FAILURE_MODE
}
run_test 27 "fail LOV while using OSC's"
test_28() { # bug 6086 - error adding new clients
- do_facet client mcreate $MOUNT/$tfile || return 1
- drop_bl_callback "chmod 0777 $MOUNT/$tfile" ||echo "evicted as expected"
+ do_facet client mcreate $DIR/$tfile || return 1
+ drop_bl_callback "chmod 0777 $DIR/$tfile" ||echo "evicted as expected"
#define OBD_FAIL_MDS_CLIENT_ADD 0x12f
do_facet $SINGLEMDS "lctl set_param fail_loc=0x8000012f"
# fail once (evicted), reconnect fail (fail_loc), ok
df || (sleep 10; df) || (sleep 10; df) || error "reconnect failed"
- rm -f $MOUNT/$tfile
+ rm -f $DIR/$tfile
fail $SINGLEMDS # verify MDS last_rcvd can be loaded
}
run_test 28 "handle error adding new clients (bug 6086)"
}
test_52() {
+ remote_ost_nodsh && skip "remote OST with nodsh" && return 0
+
mkdir -p $DIR/$tdir
test_52_guts
rc=$?
# bug 11330 - liblustre application death during I/O locks up OST
test_55() {
- remote_ost && { skip "remote OST" && return 0; }
+ remote_ost_nodsh && skip "remote OST with nodsh" && return 0
mkdir -p $DIR/$tdir
# first dd should be finished quickly
+ lfs setstripe $DIR/$tdir/$tfile-1 -c 1 -i 0
dd if=/dev/zero of=$DIR/$tdir/$tfile-1 bs=32M count=4 &
DDPID=$!
count=0
done
echo "(dd_pid=$DDPID, time=$count)successful"
- #define OBD_FAIL_OST_DROP_REQ 0x21d
- do_facet ost lctl set_param fail_loc=0x0000021d
+ lfs setstripe $DIR/$tdir/$tfile-2 -c 1 -i 0
+ #define OBD_FAIL_OST_DROP_REQ 0x21d
+ do_facet ost1 lctl set_param fail_loc=0x0000021d
# second dd will be never finished
dd if=/dev/zero of=$DIR/$tdir/$tfile-2 bs=32M count=4 &
DDPID=$!
echo "(dd_pid=$DDPID, time=$count)successful"
#Recover fail_loc and dd will finish soon
- do_facet ost lctl set_param fail_loc=0
+ do_facet ost1 lctl set_param fail_loc=0
count=0
echo "step3: testing ......"
while [ true ]; do
test_58() { # bug 11546
#define OBD_FAIL_MDC_ENQUEUE_PAUSE 0x801
- touch $MOUNT/$tfile
- ls -la $MOUNT/$tfile
+ touch $DIR/$tfile
+ ls -la $DIR/$tfile
lctl set_param fail_loc=0x80000801
- cp $MOUNT/$tfile /dev/null &
+ cp $DIR/$tfile /dev/null &
pid=$!
sleep 1
lctl set_param fail_loc=0
- drop_bl_callback rm -f $MOUNT/$tfile
+ drop_bl_callback rm -f $DIR/$tfile
wait $pid
do_facet client "df $DIR"
}
equals_msg `basename $0`: test complete, cleaning up
check_and_cleanup_lustre
-[ -f "$TESTSUITELOG" ] && cat $TESTSUITELOG || true
+[ -f "$TESTSUITELOG" ] && cat $TESTSUITELOG && grep -q FAIL $TESTSUITELOG && exit 1 || true
git://git.whamcloud.com / fs / lustre-release.git / blobdiff