LU-2620 tests: Flush changes from test 5 in replay-ost-single

[fs/lustre-release.git] / lustre / tests / mdsrate-create-small.sh

diff --git a/lustre/tests/mdsrate-create-small.sh b/lustre/tests/mdsrate-create-small.sh
index 4babb26..dcb8d56 100644 (file)
--- a/lustre/tests/mdsrate-create-small.sh
+++ b/lustre/tests/mdsrate-create-small.sh
@@ -1,4 +1,4 @@
-#!/bin/bash
+ #!/bin/bash
 #
 # This test was used in a set of CMD3 tests (cmd3-3 test). 
 
@@ -10,15 +10,15 @@ init_test_env $@
 assert_env CLIENTS MDSRATE SINGLECLIENT MPIRUN
 
 MACHINEFILE=${MACHINEFILE:-$TMP/$(basename $0 .sh).machines}
-TESTDIR=$MOUNT
+BASEDIR=$MOUNT/mdsrate
 
 # Requirements
 NUM_FILES=${NUM_FILES:-1000000}
 TIME_PERIOD=${TIME_PERIOD:-600}                        # seconds
 
 # Local test variables
-TESTDIR_SINGLE="${TESTDIR}/single"
-TESTDIR_MULTI="${TESTDIR}/multi"
+TESTDIR_SINGLE="${BASEDIR}/single"
+TESTDIR_MULTI="${BASEDIR}/multi"
 
 LOG=${TESTSUITELOG:-$TMP/$(basename $0 .sh).log}
 CLIENT=$SINGLECLIENT
@@ -34,22 +34,24 @@ fi
 [ ! -x ${MDSRATE} ] && error "${MDSRATE} not built."
 
 # Make sure we start with a clean slate
-rm -f ${LOG} PI*
+rm -f ${LOG}
 
 log "===== $0 ====== " 
 
 check_and_setup_lustre
 
-IFree=$(inodes_available)
+mkdir -p $BASEDIR
+chmod 0777 $BASEDIR
+$LFS setstripe $BASEDIR -i 0 -c 1
+get_stripe $BASEDIR
+
+IFree=$(mdsrate_inodes_available)
 if [ $IFree -lt $NUM_FILES ]; then
     NUM_FILES=$IFree
 fi
   
 generate_machine_file $NODES_TO_USE $MACHINEFILE || error "can not generate machinefile"
 
-$LFS setstripe $TESTDIR -i 0 -c 1
-get_stripe $TESTDIR
-
 if [ -n "$NOSINGLE" ]; then
     echo "NO Tests on single client."
 else
@@ -61,10 +63,11 @@ else
 
         log "===== $0 ### 1 NODE CREATE ###"
 
-        COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --create --time ${TIME_PERIOD}
-                    --nfiles $NUM_FILES --dir ${TESTDIR_SINGLE} --filefmt 'f%%d'"
-        echo "+ ${COMMAND}"
-        mpi_run -np 1 -machinefile ${MACHINEFILE} ${COMMAND} | tee ${LOG}
+       COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --create --time ${TIME_PERIOD}
+               --nfiles $NUM_FILES --dir ${TESTDIR_SINGLE} --filefmt 'f%%d'"
+       echo "+ ${COMMAND}"
+       mpi_run -np 1 ${MACHINEFILE_OPTION} ${MACHINEFILE} ${COMMAND} |
+               tee ${LOG}
 
         if [ ${PIPESTATUS[0]} != 0 ]; then
             [ -f $LOG ] && sed -e "s/^/log: /" $LOG
@@ -77,24 +80,22 @@ else
     else
         log "===== $0 ### 1 NODE UNLINK ###"
 
-        if [ -f "$LOG" ]; then
-            CREATED=$(awk '/total:/ { print $7 }' $LOG)
-           [ $CREATED -gt 0 ] && NUM_FILES=$CREATED
-        fi
-
         COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --unlink
                      --nfiles ${NUM_FILES} --dir ${TESTDIR_SINGLE} --filefmt 'f%%d'"
         echo "+ ${COMMAND}"
-        mpi_run -np 1 -machinefile ${MACHINEFILE} ${COMMAND} | tee ${LOG}
+        mpi_run -np 1 ${MACHINEFILE_OPTION} ${MACHINEFILE} ${COMMAND} |
+               tee ${LOG}
 
         if [ ${PIPESTATUS[0]} != 0 ]; then
             [ -f $LOG ] && sed -e "s/^/log: /" $LOG
             error "mdsrate unlinks for a single client failed, aborting"
         fi
+
+        rmdir $TESTDIR_SINGLE
     fi
 fi
 
-IFree=$(inodes_available)
+IFree=$(mdsrate_inodes_available)
 if [ $IFree -lt $NUM_FILES ]; then
     NUM_FILES=$IFree
 fi
@@ -109,11 +110,11 @@ else
 
         log "===== $0 ### $NUM_CLIENTS NODES CREATE with $THREADS_PER_CLIENT threads per client ###"
 
-        COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --create --time ${TIME_PERIOD}
-                    --nfiles $NUM_FILES --dir ${TESTDIR_MULTI} --filefmt 'f%%d'"
-        echo "+ ${COMMAND}"
-        mpi_run -np $((NUM_CLIENTS * THREADS_PER_CLIENT)) -machinefile ${MACHINEFILE} \
-            ${COMMAND} | tee ${LOG}
+       COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --create --time ${TIME_PERIOD}
+               --nfiles $NUM_FILES --dir ${TESTDIR_MULTI} --filefmt 'f%%d'"
+       echo "+ ${COMMAND}"
+       mpi_run -np $((NUM_CLIENTS * THREADS_PER_CLIENT)) \
+               ${MACHINEFILE_OPTION} ${MACHINEFILE} ${COMMAND} | tee ${LOG}
         if [ ${PIPESTATUS[0]} != 0 ]; then
             [ -f $LOG ] && sed -e "s/^/log: /" $LOG
             error "mdsrate create on multiple nodes failed, aborting"
@@ -125,24 +126,22 @@ else
     else
         log "===== $0 ### $NUM_CLIENTS NODES UNLINK with $THREADS_PER_CLIENT threads per client ###"
 
-        if [ -f "$LOG" ]; then
-            CREATED=$(awk '/total:/ { print $7 }' $LOG)
-            [ $CREATED -gt 0 ] && NUM_FILES=$CREATED
-        fi
-
         COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --unlink
                       --nfiles ${NUM_FILES} --dir ${TESTDIR_MULTI} --filefmt 'f%%d'"
         echo "+ ${COMMAND}"
-        mpi_run -np $((NUM_CLIENTS * THREADS_PER_CLIENT)) -machinefile ${MACHINEFILE} \
-            ${COMMAND} | tee ${LOG}
+        mpi_run -np $((NUM_CLIENTS * THREADS_PER_CLIENT)) \
+               ${MACHINEFILE_OPTION} ${MACHINEFILE} ${COMMAND} | tee ${LOG}
         if [ ${PIPESTATUS[0]} != 0 ]; then
             [ -f $LOG ] && sed -e "s/^/log: /" $LOG
             error "mdsrate unlinks multiple nodes failed, aborting"
         fi
+
+        rmdir $TESTDIR_MULTI
     fi
 fi
 
-equals_msg `basename $0`: test complete, cleaning up
+complete $SECONDS
+rmdir $BASEDIR || true
 rm -f $MACHINEFILE 
 check_and_cleanup_lustre
 #rm -f $LOG