LU-3963 libcfs: convert md[d/t]/mg[c/s] to linux atomic primitives

[fs/lustre-release.git] / lustre / tests / mdsrate-create-small.sh

diff --git a/lustre/tests/mdsrate-create-small.sh b/lustre/tests/mdsrate-create-small.sh
index c7ca1c7..d3d18b5 100644 (file)
--- a/lustre/tests/mdsrate-create-small.sh
+++ b/lustre/tests/mdsrate-create-small.sh
@@ -1,6 +1,6 @@
-#!/bin/bash
+ #!/bin/bash
 #
-# This test was used in a set of CMD3 tests (cmd3-3 test). 
+# This test was used in a set of CMD3 tests (cmd3-3 test).
 
 LUSTRE=${LUSTRE:-`dirname $0`/..}
 . $LUSTRE/tests/test-framework.sh
@@ -36,7 +36,7 @@ fi
 # Make sure we start with a clean slate
 rm -f ${LOG}
 
-log "===== $0 ====== " 
+log "===== $0 ====== "
 
 check_and_setup_lustre
 
@@ -45,11 +45,11 @@ chmod 0777 $BASEDIR
 $LFS setstripe $BASEDIR -i 0 -c 1
 get_stripe $BASEDIR
 
-IFree=$(inodes_available)
+IFree=$(mdsrate_inodes_available)
 if [ $IFree -lt $NUM_FILES ]; then
     NUM_FILES=$IFree
 fi
-  
+
 generate_machine_file $NODES_TO_USE $MACHINEFILE || error "can not generate machinefile"
 
 if [ -n "$NOSINGLE" ]; then
@@ -63,15 +63,19 @@ else
 
         log "===== $0 ### 1 NODE CREATE ###"
 
-        COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --create --time ${TIME_PERIOD}
-                    --nfiles $NUM_FILES --dir ${TESTDIR_SINGLE} --filefmt 'f%%d'"
-        echo "+ ${COMMAND}"
-        mpi_run -np 1 -machinefile ${MACHINEFILE} ${COMMAND} | tee ${LOG}
-
-        if [ ${PIPESTATUS[0]} != 0 ]; then
-            [ -f $LOG ] && sed -e "s/^/log: /" $LOG
-            error "mdsrate create for a single client failed, aborting"
-        fi
+       COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --create --time ${TIME_PERIOD}
+               --nfiles $NUM_FILES --dir ${TESTDIR_SINGLE} --filefmt 'f%%d'"
+       echo "+ ${COMMAND}"
+       mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np 1 ${COMMAND} |
+               tee ${LOG}
+
+       if [ ${PIPESTATUS[0]} != 0 ]; then
+               [ -f $LOG ] && sed -e "s/^/log: /" $LOG
+               error_noexit "mdsrate create on single client failed, aborting"
+               mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES \
+                               $TESTDIR_SINGLE 'f%%d' --ignore
+               exit 1
+       fi
     fi
 
     if [ -n "$NOUNLINK" ]; then
@@ -79,15 +83,11 @@ else
     else
         log "===== $0 ### 1 NODE UNLINK ###"
 
-        if [ -f "$LOG" ]; then
-            CREATED=$(awk '/total:/ { print $7 }' $LOG)
-           [ $CREATED -gt 0 ] && NUM_FILES=$CREATED
-        fi
-
         COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --unlink
                      --nfiles ${NUM_FILES} --dir ${TESTDIR_SINGLE} --filefmt 'f%%d'"
         echo "+ ${COMMAND}"
-        mpi_run -np 1 -machinefile ${MACHINEFILE} ${COMMAND} | tee ${LOG}
+        mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np 1 ${COMMAND} |
+               tee ${LOG}
 
         if [ ${PIPESTATUS[0]} != 0 ]; then
             [ -f $LOG ] && sed -e "s/^/log: /" $LOG
@@ -98,7 +98,7 @@ else
     fi
 fi
 
-IFree=$(inodes_available)
+IFree=$(mdsrate_inodes_available)
 if [ $IFree -lt $NUM_FILES ]; then
     NUM_FILES=$IFree
 fi
@@ -113,15 +113,21 @@ else
 
         log "===== $0 ### $NUM_CLIENTS NODES CREATE with $THREADS_PER_CLIENT threads per client ###"
 
-        COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --create --time ${TIME_PERIOD}
-                    --nfiles $NUM_FILES --dir ${TESTDIR_MULTI} --filefmt 'f%%d'"
-        echo "+ ${COMMAND}"
-        mpi_run -np $((NUM_CLIENTS * THREADS_PER_CLIENT)) -machinefile ${MACHINEFILE} \
-            ${COMMAND} | tee ${LOG}
-        if [ ${PIPESTATUS[0]} != 0 ]; then
-            [ -f $LOG ] && sed -e "s/^/log: /" $LOG
-            error "mdsrate create on multiple nodes failed, aborting"
-        fi
+       COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --create --time ${TIME_PERIOD}
+               --nfiles $NUM_FILES --dir ${TESTDIR_MULTI} --filefmt 'f%%d'"
+       echo "+ ${COMMAND}"
+       mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} \
+               -np $((NUM_CLIENTS * THREADS_PER_CLIENT)) ${COMMAND} |
+               tee ${LOG}
+
+       if [ ${PIPESTATUS[0]} != 0 ]; then
+               [ -f $LOG ] && sed -e "s/^/log: /" $LOG
+               error_noexit "mdsrate create on multiple nodes failed, aborting"
+               mdsrate_cleanup $((NUM_CLIENTS * THREADS_PER_CLIENT)) \
+                               $MACHINEFILE $NUM_FILES \
+                               $TESTDIR_MULTI 'f%%d' --ignore
+               exit 1
+       fi
     fi
 
     if [ -n "$NOUNLINK" ]; then
@@ -129,16 +135,12 @@ else
     else
         log "===== $0 ### $NUM_CLIENTS NODES UNLINK with $THREADS_PER_CLIENT threads per client ###"
 
-        if [ -f "$LOG" ]; then
-            CREATED=$(awk '/total:/ { print $7 }' $LOG)
-            [ $CREATED -gt 0 ] && NUM_FILES=$CREATED
-        fi
-
         COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --unlink
                       --nfiles ${NUM_FILES} --dir ${TESTDIR_MULTI} --filefmt 'f%%d'"
         echo "+ ${COMMAND}"
-        mpi_run -np $((NUM_CLIENTS * THREADS_PER_CLIENT)) -machinefile ${MACHINEFILE} \
-            ${COMMAND} | tee ${LOG}
+        mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} \
+               -np $((NUM_CLIENTS * THREADS_PER_CLIENT)) ${COMMAND} |
+               tee ${LOG}
         if [ ${PIPESTATUS[0]} != 0 ]; then
             [ -f $LOG ] && sed -e "s/^/log: /" $LOG
             error "mdsrate unlinks multiple nodes failed, aborting"
@@ -148,9 +150,9 @@ else
     fi
 fi
 
-equals_msg `basename $0`: test complete, cleaning up
+complete $SECONDS
 rmdir $BASEDIR || true
-rm -f $MACHINEFILE 
+rm -f $MACHINEFILE
 check_and_cleanup_lustre
 #rm -f $LOG