ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
+if [ "$FAILURE_MODE" = "HARD" ]; then
+ CONFIG_EXCEPTIONS="24a " && \
+ echo "Except the tests: $CONFIG_EXCEPTIONS for FAILURE_MODE=$FAILURE_MODE, bug 23573" && \
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT $CONFIG_EXCEPTIONS"
+fi
+
SRCDIR=`dirname $0`
PATH=$PWD/$SRCDIR:$SRCDIR:$SRCDIR/../utils:$PATH
OSTSIZE=200000
. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
+if ! combined_mgs_mds; then
+ # bug number for skipped test: 23954
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 24b"
+fi
+
# STORED_MDSSIZE is used in test_18
if [ -n "$MDSSIZE" ]; then
STORED_MDSSIZE=$MDSSIZE
fi
+# pass "-E lazy_itable_init" to mke2fs to speed up the formatting time
+for facet in MGS MDS OST; do
+ opts=${facet}_MKFS_OPTS
+ if [[ ${!opts} != *lazy_itable_init* ]]; then
+ eval SAVED_${facet}_MKFS_OPTS=\"${!opts}\"
+ eval ${facet}_MKFS_OPTS=\"${!opts} \
+--mkfsoptions='\\\"-E lazy_itable_init\\\"'\"
+ fi
+done
+
init_logging
#
stop ${facet} -f
rm -f ${facet}active
# who knows if/where $TUNEFS is installed? Better reformat if it fails...
- do_facet ${facet} "$TUNEFS --writeconf $dev" ||
+ do_facet ${facet} "$TUNEFS --quiet --writeconf $dev" ||
{ echo "tunefs failed, reformatting instead" && reformat_and_config && return 1; }
return 0
}
writeconf() {
- # if writeconf failed, we reformatted
- writeconf1 mds $MDSDEV || return 0
+ # we need ldiskfs
+ load_modules
+ # if writeconf fails anywhere, we reformat everything
+ writeconf1 mds `mdsdevname 1` || return 0
writeconf1 ost1 `ostdevname 1` || return 0
writeconf1 ost2 `ostdevname 2` || return 0
}
start_mgs () {
echo "start mgs"
- start mgs $MGSDEV $mgs_MOUNT_OPTS
+ start mgs $MGSDEV $MGS_MOUNT_OPTS
}
start_mds() {
stop $SINGLEMDS -f || return 97
}
+stop_mgs() {
+ echo "stop mgs service on `facet_active_host mgs`"
+ # These tests all use non-failover stop
+ stop mgs -f || return 97
+}
+
start_ost() {
echo "start ost1 service on `facet_active_host ost1`"
start ost1 `ostdevname 1` $OST_MOUNT_OPTS $@ || return 95
}
remount_client() {
- local SAVEMOUNTOPT=$MOUNTOPT
- MOUNTOPT="remount,$1"
+ local mountopt="-o remount,$1"
local MOUNTPATH=$2
echo "remount '$1' lustre on ${MOUNTPATH}....."
- zconf_mount `hostname` $MOUNTPATH || return 96
- MOUNTOPT=$SAVEMOUNTOPT
+ zconf_mount `hostname` $MOUNTPATH "$mountopt" || return 96
}
umount_client() {
start_mds || error "MDT start failed"
start_ost || error "OST start failed"
mount_client $MOUNT || error "client start failed"
+ client_up || error "client_up failed"
}
setup_noconfig() {
mount_client $MOUNT
}
+unload_modules_conf () {
+ if combined_mgs_mds || ! local_mode; then
+ unload_modules || return 1
+ fi
+}
+
cleanup_nocli() {
stop_ost || return 202
stop_mds || return 201
- unload_modules || return 203
+ unload_modules_conf || return 203
}
cleanup() {
- umount_client $MOUNT || return 200
+ umount_client $MOUNT || return 200
cleanup_nocli || return $?
}
# cleanup may return an error from the failed
# disconnects; for now I'll consider this successful
# if all the modules have unloaded.
- umount -d $MOUNT &
+ umount -d $MOUNT &
UMOUNT_PID=$!
sleep 6
echo "killing umount"
while [ "$WAIT" -ne "$MAX_WAIT" ]; do
sleep $sleep
grep -q $MOUNT" " /etc/mtab || break
- echo "Waiting /etc/mtab updated ... "
+ echo "Waiting /etc/mtab updated ... "
WAIT=$(( WAIT + sleep))
done
[ "$WAIT" -eq "$MAX_WAIT" ] && error "/etc/mtab is not updated in $WAIT secs"
}
run_test 5a "force cleanup mds, then cleanup"
+cleanup_5b () {
+ trap 0
+ start_mgs
+}
+
test_5b() {
+ grep " $MOUNT " /etc/mtab && \
+ error false "unexpected entry in mtab before mount" && return 10
+
+ local rc=0
start_ost
+ if ! combined_mgs_mds ; then
+ trap cleanup_5b EXIT ERR
+ start_mds
+ stop mgs
+ fi
+
[ -d $MOUNT ] || mkdir -p $MOUNT
- grep " $MOUNT " /etc/mtab && echo "test 5b: mtab before mount" && return 10
- mount_client $MOUNT && return 1
- grep " $MOUNT " /etc/mtab && echo "test 5b: mtab after failed mount" && return 11
+ mount_client $MOUNT && rc=1
+ grep " $MOUNT " /etc/mtab && \
+ error "$MOUNT entry in mtab after failed mount" && rc=11
umount_client $MOUNT
# stop_mds is a no-op here, and should not fail
- cleanup_nocli || return $?
- return 0
+ cleanup_nocli || rc=$?
+ if ! combined_mgs_mds ; then
+ cleanup_5b
+ fi
+ return $rc
}
-run_test 5b "mds down, cleanup after failed mount (bug 2712) (should return errs)"
+run_test 5b "Try to start a client with no MGS (should return errs)"
test_5c() {
+ grep " $MOUNT " /etc/mtab && \
+ error false "unexpected entry in mtab before mount" && return 10
+
+ local rc=0
start_mds
start_ost
[ -d $MOUNT ] || mkdir -p $MOUNT
- grep " $MOUNT " /etc/mtab && echo "test 5c: mtab before mount" && return 10
local oldfs="${FSNAME}"
FSNAME="wrong.${FSNAME}"
mount_client $MOUNT || :
FSNAME=${oldfs}
- grep " $MOUNT " /etc/mtab && echo "test 5c: mtab after failed mount" && return 11
+ grep " $MOUNT " /etc/mtab && \
+ error "$MOUNT entry in mtab after failed mount" && rc=11
umount_client $MOUNT
- cleanup_nocli || return $?
+ cleanup_nocli || rc=$?
+ return $rc
}
run_test 5c "cleanup after failed mount (bug 2712) (should return errs)"
test_5d() {
+ grep " $MOUNT " /etc/mtab && \
+ error false "unexpected entry in mtab before mount" && return 10
+
+ local rc=0
start_ost
start_mds
stop_ost -f
- grep " $MOUNT " /etc/mtab && echo "test 5d: mtab before mount" && return 10
- mount_client $MOUNT || return 1
- cleanup || return $?
- grep " $MOUNT " /etc/mtab && echo "test 5d: mtab after unmount" && return 11
- return 0
+ mount_client $MOUNT || rc=1
+ cleanup || rc=$?
+ grep " $MOUNT " /etc/mtab && \
+ error "$MOUNT entry in mtab after unmount" && rc=11
+ return $rc
}
run_test 5d "mount with ost down"
test_5e() {
+ grep " $MOUNT " /etc/mtab && \
+ error false "unexpected entry in mtab before mount" && return 10
+
+ local rc=0
start_mds
start_ost
#define OBD_FAIL_PTLRPC_DELAY_SEND 0x506
do_facet client "lctl set_param fail_loc=0x80000506"
- grep " $MOUNT " /etc/mtab && echo "test 5e: mtab before mount" && return 10
mount_client $MOUNT || echo "mount failed (not fatal)"
- cleanup || return $?
- grep " $MOUNT " /etc/mtab && echo "test 5e: mtab after unmount" && return 11
- return 0
+ cleanup || rc=$?
+ grep " $MOUNT " /etc/mtab && \
+ error "$MOUNT entry in mtab after unmount" && rc=11
+ return $rc
}
run_test 5e "delayed connect, don't crash (bug 10268)"
+test_5f() {
+ if combined_mgs_mds ; then
+ skip "combined mgs and mds"
+ return 0
+ fi
+
+ grep " $MOUNT " /etc/mtab && \
+ error false "unexpected entry in mtab before mount" && return 10
+
+ local rc=0
+ start_ost
+ [ -d $MOUNT ] || mkdir -p $MOUNT
+ mount_client $MOUNT &
+ local pid=$!
+ echo client_mount pid is $pid
+
+ sleep 5
+
+ if ! ps -f -p $pid >/dev/null; then
+ wait $pid
+ rc=$?
+ grep " $MOUNT " /etc/mtab && echo "test 5f: mtab after mount"
+ error "mount returns $rc, expected to hang"
+ rc=11
+ cleanup || rc=$?
+ return $rc
+ fi
+
+ # start mds
+ start_mds
+
+ # mount should succeed after start mds
+ wait $pid
+ rc=$?
+ [ $rc -eq 0 ] || error "mount returned $rc"
+ grep " $MOUNT " /etc/mtab && echo "test 5f: mtab after mount"
+ cleanup || return $?
+ return $rc
+}
+run_test 5f "mds down, cleanup after failed mount (bug 2712)"
+
test_6() {
setup
manual_umount_client
}
run_test 9 "test ptldebug and subsystem for mkfs"
+is_blkdev () {
+ local facet=$1
+ local dev=$2
+ local size=${3:-""}
+
+ local rc=0
+ do_facet $facet "test -b $dev" || rc=1
+ if [[ "$size" ]]; then
+ local in=$(do_facet $facet "dd if=$dev of=/dev/null bs=1k count=1 skip=$size 2>&1" |\
+ awk '($3 == "in") { print $1 }')
+ [[ $in = "1+0" ]] || rc=1
+ fi
+ return $rc
+}
+
#
# Test 16 was to "verify that lustre will correct the mode of OBJECTS".
# But with new MDS stack we don't care about the mode of local objects
#
test_17() {
- local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+ setup
+ check_mount || return 41
+ cleanup || return $?
- if [ ! -e "$MDSDEV" ]; then
- echo "no $MDSDEV existing, so mount Lustre to create one"
- setup
- check_mount || return 41
- cleanup || return $?
+ echo "Remove mds config log"
+ if ! combined_mgs_mds ; then
+ stop mgs
fi
- echo "Remove mds config log"
- do_facet $SINGLEMDS "$DEBUGFS -w -R 'unlink CONFIGS/$FSNAME-MDT0000' $MDSDEV || return \$?" || return $?
+ do_facet mgs "$DEBUGFS -w -R 'unlink CONFIGS/$FSNAME-MDT0000' $MGSDEV || return \$?" || return $?
+
+ if ! combined_mgs_mds ; then
+ start_mgs
+ fi
start_ost
- start_mds && return 42
- reformat_and_config
+ start_mds && return 42
+ reformat_and_config
}
run_test 17 "Verify failed mds_postsetup won't fail assertion (2936) (should return errs)"
log "use STORED_MDSSIZE=$STORED_MDSSIZE"
# check if the block device is large enough
- [ -z "$OK" -a -b $MDSDEV ] && \
- [ "$(dd if=$MDSDEV of=/dev/null bs=1k count=1 skip=$MIN 2>&1 |
- awk '($3 == "in") { print $1 }')" = "1+0" ] && OK=1 && \
+ [ -z "$OK" ] && $(is_blkdev $SINGLEMDS $MDSDEV $MIN) && OK=1 &&
myMDSSIZE=$MIN && log "use device $MDSDEV with MIN=$MIN"
# check if a loopback device has enough space for fs metadata (5%)
- [ -z "$OK" ] && [ -f $MDSDEV -o ! -e $MDSDEV ] &&
- SPACE=$(df -P $(dirname $MDSDEV) |
- awk '($1 != "Filesystem") {print $4}') &&
- [ $SPACE -gt $((MIN / 20)) ] && OK=1 && myMDSSIZE=$MIN && \
+
+ if [ -z "$OK" ]; then
+ local SPACE=$(do_facet $SINGLEMDS "[ -f $MDSDEV -o ! -e $MDSDEV ] && df -P \\\$(dirname $MDSDEV)" |
+ awk '($1 != "Filesystem") {print $4}')
+ ! [ -z "$SPACE" ] && [ $SPACE -gt $((MIN / 20)) ] && \
+ OK=1 && myMDSSIZE=$MIN && \
log "use file $MDSDEV with MIN=$MIN"
+ fi
[ -z "$OK" ] && skip_env "$MDSDEV too small for ${MIN}kB MDS" && return
echo "mount mds with large journal..."
local OLD_MDS_MKFS_OPTS=$MDS_MKFS_OPTS
- MDS_MKFS_OPTS="--mgs --mdt --fsname=$FSNAME --device-size=$myMDSSIZE --param sys.timeout=$TIMEOUT $MDSOPT"
+ local opts="--mdt --fsname=$FSNAME --device-size=$myMDSSIZE --param sys.timeout=$TIMEOUT $MDSOPT"
+
+ if combined_mgs_mds ; then
+ MDS_MKFS_OPTS="--mgs $opts"
+ else
+ MDS_MKFS_OPTS="--mgsnode=$MGSNID $opts"
+ fi
reformat_and_config
echo "mount lustre system..."
- setup
+ setup
check_mount || return 41
echo "check journal size..."
- local FOUNDSIZE=`do_facet mds "$DEBUGFS -c -R 'stat <8>' $MDSDEV" | awk '/Size: / { print $NF; exit;}'`
+ local FOUNDSIZE=$(do_facet $SINGLEMDS "$DEBUGFS -c -R 'stat <8>' $MDSDEV" | awk '/Size: / { print $NF; exit;}')
if [ $FOUNDSIZE -gt $((32 * 1024 * 1024)) ]; then
log "Success: mkfs creates large journals. Size: $((FOUNDSIZE >> 20))M"
else
}
run_test 21c "start mds between two osts, stop mds last"
+test_21d() {
+ if combined_mgs_mds ; then
+ skip "need separate mgs device" && return 0
+ fi
+ stopall
+
+ reformat
+
+ start_mgs
+ start_ost
+ start_ost2
+ start_mds
+ wait_osc_import_state mds ost2 FULL
+
+ stop_ost
+ stop_ost2
+ stop_mds
+ stop_mgs
+ #writeconf to remove all ost2 traces for subsequent tests
+ writeconf
+ start_mgs
+}
+run_test 21d "start mgs then ost and then mds"
+
test_22() {
start_mds
sleep $((TIMEOUT + TIMEOUT + TIMEOUT))
fi
mount_client $MOUNT
+ wait_osc_import_state mds ost FULL
+ wait_osc_import_state client ost FULL
check_mount || return 41
pass
stop $SINGLEMDS
# force down client so that recovering mds waits for reconnect
local running=$(grep -c $MOUNT /proc/mounts) || true
- if [ $running -ne 0 ]; then
- echo "Stopping client $MOUNT (opts: -f)"
- umount -f $MOUNT
- fi
+ if [ $running -ne 0 ]; then
+ echo "Stopping client $MOUNT (opts: -f)"
+ umount -f $MOUNT
+ fi
# enter recovery on mds
start_mds
echo mount pid is ${MOUNT_PID}, mount.lustre pid is ${MOUNT_LUSTRE_PID}
ps --ppid $MOUNT_PID
ps --ppid $MOUNT_LUSTRE_PID
- # FIXME why o why can't I kill these? Manual "ctrl-c" works...
- kill -TERM $MOUNT_LUSTRE_PID
echo "waiting for mount to finish"
ps -ef | grep mount
+ # "ctrl-c" sends SIGINT but it usually (in script) does not work on child process
+ # SIGTERM works but it does not spread to offspring processses
+ kill -s TERM $MOUNT_PID
+ kill -s TERM $MOUNT_LUSTRE_PID
# we can not wait $MOUNT_PID because it is not a child of this shell
local PID1
local PID2
}
test_24a() {
- #set up fs1
- gen_config
-
- #set up fs2
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
- [ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
- do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
+ is_blkdev $SINGLEMDS $MDSDEV && \
skip_env "mixed loopback and real device not working" && return
fi
+ [ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
+
local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
local fs2ostdev=${fs2ost_DEV:-$(ostdevname 1)_2}
facet_failover fs2mds
facet_failover fs2ost
df
- umount_client $MOUNT
+ umount_client $MOUNT
# the MDS must remain up until last MDT
stop_mds
MDS=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
if [ -z "$fs2mds_DEV" ]; then
- do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
+ local dev=${SINGLEMDS}_dev
+ local MDSDEV=${!dev}
+ is_blkdev $SINGLEMDS $MDSDEV && \
skip_env "mixed loopback and real device not working" && return
fi
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000135"
start_mds && echo MDS started && return 1
lctl get_param -n devices
- DEVS=$(lctl get_param -n devices | wc -l)
+ DEVS=$(lctl get_param -n devices | egrep -v MG | wc -l)
[ $DEVS -gt 0 ] && return 2
- unload_modules || return 203
+ unload_modules_conf || return $?
}
run_test 26 "MDT startup failure cleans LOV (should return errs)"
set_and_check client "$TEST" "$PARAM" $FINAL || return 3
FINAL=$(($FINAL + 1))
set_and_check client "$TEST" "$PARAM" $FINAL || return 4
- umount_client $MOUNT || return 200
+ umount_client $MOUNT || return 200
mount_client $MOUNT
RESULT=$($TEST)
if [ $RESULT -ne $FINAL ]; then
echo "Waiting $(($MAX - $WAIT)) secs for MDT deactivated"
done
+ # quotacheck should not fail immediately after deactivate
+ [ -n "$ENABLE_QUOTA" ] && { $LFS quotacheck -ug $MOUNT || error "quotacheck has failed" ; }
+
# test new client starts deactivated
- umount_client $MOUNT || return 200
+ umount_client $MOUNT || return 200
mount_client $MOUNT
RESULT=$(lctl get_param -n $PROC_UUID | grep DEACTIV | grep NEW)
if [ -z "$RESULT" ]; then
echo "New client success: got $RESULT"
fi
+ # quotacheck should not fail after umount/mount operation
+ [ -n "$ENABLE_QUOTA" ] && { $LFS quotacheck -ug $MOUNT || error "quotacheck has failed" ; }
+
# make sure it reactivates
set_and_check client "lctl get_param -n $PROC_ACT" "$PARAM" $ACTV || return 6
- umount_client $MOUNT
+ umount_client $MOUNT
stop_ost2
cleanup_nocli
#writeconf to remove all ost2 traces for subsequent tests
set_and_check client "$TEST" "$FSNAME.llite.max_read_ahead_whole_mb" $i || return 3
done
# make sure client restart still works
- umount_client $MOUNT
+ umount_client $MOUNT
mount_client $MOUNT || return 4
[ "$($TEST)" -ne "$i" ] && error "Param didn't stick across restart $($TEST) != $i"
pass
umount -f $MOUNT || true
echo "Cleanup local mds ost1 ..."
cleanup_nocli32
- unload_modules
+ combined_mgs_mds || start_mgs
+ unload_modules_conf
}
test_32a() {
$TUNEFS $tmpdir/mds || error "tunefs failed"
+ combined_mgs_mds || stop mgs
+
# nids are wrong, so client wont work, but server should start
start32 mds1 $tmpdir/mds "-o loop,exclude=lustre-OST0000" && \
trap cleanup_32 EXIT INT || return 3
# mount a second time to make sure we didnt leave upgrade flag on
load_modules
$TUNEFS --dryrun $tmpdir/mds || error "tunefs failed"
+
+ combined_mgs_mds || stop mgs
+
start32 mds1 $tmpdir/mds "-o loop,exclude=lustre-OST0000" && \
trap cleanup_32 EXIT INT || return 12
# writeconf will cause servers to register with their current nids
$TUNEFS --writeconf --fsname=$NEWNAME $tmpdir/mds || error "tunefs failed"
+ combined_mgs_mds || stop mgs
+
start32 mds1 $tmpdir/mds "-o loop" && \
trap cleanup_32 EXIT INT || return 3
[ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
- do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
+ local dev=${SINGLEMDS}_dev
+ local MDSDEV=${!dev}
+ is_blkdev $SINGLEMDS $MDSDEV && \
skip_env "mixed loopback and real device not working" && return
fi
+ combined_mgs_mds || mkfs_opts="$mkfs_opts --nomgs"
+
local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
local fs2ostdev=${fs2ost_DEV:-$(ostdevname 1)_2}
add fs2mds $MDS_MKFS_OPTS --mkfsoptions='\"-J size=8\"' --fsname=${FSNAME2} --reformat $fs2mdsdev || exit 10
touch $DIR/$tfile || return 1
stop_mds --force || return 2
- manual_umount_client --force
+ manual_umount_client --force
rc=$?
if [ $rc -ne 0 ]; then
error "mtab after failed umount - rc $rc"
touch $DIR/$tfile || return 1
stop_ost --force || return 2
- manual_umount_client --force
+ manual_umount_client --force
rc=$?
if [ $rc -ne 0 ]; then
error "mtab after failed umount - rc $rc"
log "Set up a fake failnode for the MDS"
FAKENID="127.0.0.2"
- local device=$(do_facet mds "$LCTL get_param -n devices" | \
+ local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" | \
awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
- do_facet mds "$LCTL conf_param ${device}.failover.node=$FAKENID" || \
+ do_facet $SINGLEMDS "$LCTL conf_param ${device}.failover.node=$FAKENID" || \
return 1
local at_max_saved=0
- # adaptive timeouts may prevent seeing the issue
+ # adaptive timeouts may prevent seeing the issue
if at_is_enabled; then
at_max_saved=$(at_max_get mds)
at_max_set 0 mds client
fi
- mkdir -p $MOUNT/testdir
- touch $MOUNT/testdir/test
+ mkdir -p $MOUNT/$tdir
log "Injecting EBUSY on MDS"
# Setting OBD_FAIL_MDS_RESEND=0x136
- do_facet mds "$LCTL set_param fail_loc=0x80000136" || return 2
+ do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x80000136" || return 2
- log "Stat on a test file"
- stat $MOUNT/testdir/test
+ $LCTL set_param mdc.${FSNAME}*.stats=clear
+
+ log "Creating a test file and stat it"
+ touch $MOUNT/$tdir/$tfile
+ stat $MOUNT/$tdir/$tfile
log "Stop injecting EBUSY on MDS"
- do_facet mds "$LCTL set_param fail_loc=0" || return 3
- rm -f $MOUNT/testdir/test
+ do_facet $SINGLEMDS "$LCTL set_param fail_loc=0" || return 3
+ rm -f $MOUNT/$tdir/$tfile
log "done"
# restore adaptive timeout
$LCTL dk $TMP/lustre-log-$TESTNAME.log
+ CONNCNT=`$LCTL get_param mdc.${FSNAME}*.stats | awk '/mds_connect/{print $2}'`
+
# retrieve from the log if the client has ever tried to
# contact the fake server after the loss of connection
FAILCONN=`awk "BEGIN {ret = 0;}
log "ERROR: The client tried to reconnect to the failover server while the primary was busy" && \
return 5
- cleanup
+ # LU-290
+ # When OBD_FAIL_MDS_RESEND is hit, we sleep for 2 * obd_timeout
+ # Reconnects are supposed to be rate limited to one every 5s
+ [ $CONNCNT -gt $((2 * $TIMEOUT / 5 + 1)) ] && \
+ log "ERROR: Too many reconnects $CONNCNT" && \
+ return 6
+
+ cleanup
# remove nid settings
writeconf
}
run_test 35b "Continue reconnection retries, if the active server is busy"
test_36() { # 12743
- local rc
+ [ $OSTCOUNT -lt 2 ] && skip_env "skipping test for single OST" && return
+
+ [ "$ost_HOST" = "`hostname`" -o "$ost1_HOST" = "`hostname`" ] || \
+ { skip "remote OST" && return 0; }
+
+ local rc=0
local FSNAME2=test1234
local fs3ost_HOST=$ost_HOST
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
[ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST && fs3ost_HOST=$ost1_HOST
- rc=0
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" -o -z "$fs3ost_DEV" ]; then
- do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
+ is_blkdev $SINGLEMDS $MDSDEV && \
skip_env "mixed loopback and real device not working" && return
fi
- [ $OSTCOUNT -lt 2 ] && skip_env "skipping test for single OST" && return
-
- [ "$ost_HOST" = "`hostname`" -o "$ost1_HOST" = "`hostname`" ] || \
- { skip "remote OST" && return 0; }
local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
local fs2ostdev=${fs2ost_DEV:-$(ostdevname 1)_2}
stop fs2ost -f || return 201
stop fs2mds -f || return 202
rm -rf $MOUNT2 $fs2mdsdev $fs2ostdev $fs3ostdev
- unload_modules || return 203
+ unload_modules_conf || return 203
return $rc
}
run_test 36 "df report consistency on OSTs with different block size"
test_37() {
- client_only && skip "client only testing" && return 0
- LOCAL_MDSDEV="$TMP/mdt.img"
- SYM_MDSDEV="$TMP/sym_mdt.img"
+ local mntpt=$(facet_mntpt $SINGLEMDS)
+ local mdsdev=$(mdsdevname ${SINGLEMDS//mds/})
+ local mdsdev_sym="$TMP/sym_mdt.img"
- echo "MDS : $LOCAL_MDSDEV"
- echo "SYMLINK : $SYM_MDSDEV"
- rm -f $LOCAL_MDSDEV
+ echo "MDS : $mdsdev"
+ echo "SYMLINK : $mdsdev_sym"
+ do_facet $SINGLEMDS rm -f $mdsdev_sym
- touch $LOCAL_MDSDEV
- mkfs.lustre --reformat --fsname=lustre --mdt --mgs --device-size=9000 $LOCAL_MDSDEV ||
- error "mkfs.lustre $LOCAL_MDSDEV failed"
- ln -s $LOCAL_MDSDEV $SYM_MDSDEV
+ do_facet $SINGLEMDS ln -s $mdsdev $mdsdev_sym
- echo "mount symlink device - $SYM_MDSDEV"
+ echo "mount symlink device - $mdsdev_sym"
- mount_op=`mount -v -t lustre -o loop $SYM_MDSDEV ${MOUNT%/*}/mds 2>&1 | grep "unable to set tunable"`
- umount -d ${MOUNT%/*}/mds
- rm -f $LOCAL_MDSDEV $SYM_MDSDEV
+ local rc=0
+ mount_op=$(do_facet $SINGLEMDS mount -v -t lustre $MDS_MOUNT_OPTS $mdsdev_sym $mntpt 2>&1 )
+ rc=${PIPESTATUS[0]}
+
+ echo mount_op=$mount_op
+
+ do_facet $SINGLEMDS "umount -d $mntpt && rm -f $mdsdev_sym"
- if [ -n "$mount_op" ]; then
- error "**** FAIL: set tunables failed for symlink device"
+ if $(echo $mount_op | grep -q "unable to set tunable"); then
+ error "set tunables failed for symlink device"
fi
+
+ [ $rc -eq 0 ] || error "mount symlink $mdsdev_sym failed! rc=$rc"
+
return 0
}
run_test 37 "verify set tunables works for symlink device"
test_40() { # bug 15759
start_ost
#define OBD_FAIL_TGT_TOOMANY_THREADS 0x706
- do_facet $SINGLEMDS "sysctl -w lustre.fail_loc=0x80000706"
+ do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x80000706"
start_mds
cleanup
}
run_test 40 "race during service thread startup"
-test_41() { #bug 14134
+test_41a() { #bug 14134
+ echo $MDS_MOUNT_OPTS | grep "loop" && skip " loop devices does not work with nosvc option" && return
+
local rc
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
stop ost1 -f || return 201
stop_mds -f || return 202
stop_mds -f || return 203
- unload_modules || return 204
+ unload_modules_conf || return 204
return $rc
}
-run_test 41 "mount mds with --nosvc and --nomgs"
+run_test 41a "mount mds with --nosvc and --nomgs"
+
+test_41b() {
+ echo $MDS_MOUNT_OPTS | grep "loop" && skip " loop devices does not work with nosvc option" && return
+
+ ! combined_mgs_mds && skip "needs combined mgs device" && return 0
+
+ stopall
+ reformat
+ local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+
+ start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nosvc -n
+ start_ost
+ start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nomgs,force
+ mkdir -p $MOUNT
+ mount_client $MOUNT || return 1
+ sleep 5
+
+ echo "blah blah" > $MOUNT/$tfile
+ cat $MOUNT/$tfile || return 200
+
+ umount_client $MOUNT
+ stop_ost || return 201
+ stop_mds -f || return 202
+ stop_mds -f || return 203
+
+}
+run_test 41b "mount mds with --nosvc and --nomgs on first mount"
test_42() { #bug 14693
setup
check_mount || return 2
UUID=$($LCTL get_param llite.${FSNAME}*.uuid | cut -d= -f2)
STATS_FOUND=no
- UUIDS=$(do_facet mds "$LCTL get_param mdt.${FSNAME}*.exports.*.uuid")
+ UUIDS=$(do_facet $SINGLEMDS "$LCTL get_param mdt.${FSNAME}*.exports.*.uuid")
for VAL in $UUIDS; do
NID=$(echo $VAL | cut -d= -f1)
CLUUID=$(echo $VAL | cut -d= -f2)
stop ost${count} -f || rc=$?
let count=count-1
done
- stop_mds || rc=$?
+ stop_mds || rc=$?
cleanup_nocli || rc=$?
#writeconf to remove all ost2 traces for subsequent tests
writeconf
mount_client $MOUNT || return 3
trap "cleanup_46a $OSTCOUNT" EXIT ERR
- local i
+ local i
for (( i=2; i<=$OSTCOUNT; i++ )); do
start ost$i `ostdevname $i` $OST_MOUNT_OPTS || return $((i+2))
done
# wait until osts in sync
for (( i=2; i<=$OSTCOUNT; i++ )); do
wait_osc_import_state mds ost$i FULL
+ wait_osc_import_state client ost$i FULL
done
-
#second client see all ost's
mount_client $MOUNT2 || return 8
check_mount || return 1
echo "check ldlm_timout..."
- LDLM_MDS="`do_facet mds lctl get_param -n ldlm_timeout`"
+ LDLM_MDS="`do_facet $SINGLEMDS lctl get_param -n ldlm_timeout`"
LDLM_OST1="`do_facet ost1 lctl get_param -n ldlm_timeout`"
LDLM_CLIENT="`do_facet client lctl get_param -n ldlm_timeout`"
setup_noconfig
check_mount || return 7
- LDLM_MDS="`do_facet mds lctl get_param -n ldlm_timeout`"
+ LDLM_MDS="`do_facet $SINGLEMDS lctl get_param -n ldlm_timeout`"
LDLM_OST1="`do_facet ost1 lctl get_param -n ldlm_timeout`"
LDLM_CLIENT="`do_facet client lctl get_param -n ldlm_timeout`"
wait_osc_import_state mds ost DISCONN
lazystatfs $MOUNT || error "lazystatfs failed with one down server"
- umount_client $MOUNT || error "Unable to unmount client"
+ umount_client $MOUNT || error "Unable to unmount client"
stop_ost2 || error "Unable to stop OST2"
stop_mds || error "Unable to stop MDS"
+ #writeconf to remove all ost2 traces for subsequent tests
+ writeconf
}
run_test 50c "lazystatfs one server down =========================="
stop_ost || error "Unable to stop OST1"
lazystatfs $MOUNT || error "lazystatfs failed with one down server"
- umount_client $MOUNT || error "Unable to unmount client"
+ umount_client $MOUNT || error "Unable to unmount client"
stop_ost2 || error "Unable to stop OST2"
stop_mds || error "Unable to stop MDS"
+ #writeconf to remove all ost2 traces for subsequent tests
+ writeconf
}
run_test 50d "lazystatfs client/server conn race =========================="
[ "$OSTCOUNT" -lt "2" ] && skip_env "$OSTCOUNT < 2, skipping" && return
setup
start_ost2 || error "Unable to start OST2"
+ wait_osc_import_state mds ost2 FULL
+ wait_osc_import_state client ost2 FULL
local PARAM="${FSNAME}-OST0001.osc.active"
wait $pid
stop_ost2 || return 3
cleanup
+ #writeconf to remove all ost2 traces for subsequent tests
+ writeconf
}
run_test 51 "Verify that mdt_reint handles RMF_MDT_MD correctly when an OST is added"
[ $? -eq 0 ] || { error "Unable to create tdir"; return 4; }
touch $TMP/modified_first
[ $? -eq 0 ] || { error "Unable to create temporary file"; return 5; }
- do_node $ost1node "mkdir -p $ost1tmp && touch $ost1tmp/modified_first"
+ local mtime=$(stat -c %Y $TMP/modified_first)
+ do_node $ost1node "mkdir -p $ost1tmp && touch -m -d @$mtime $ost1tmp/modified_first"
+
[ $? -eq 0 ] || { error "Unable to create temporary file"; return 6; }
sleep 1
[ $? -eq 0 ] || { error "Unable to stop ost1"; return 11; }
echo mount ost1 as ldiskfs
+ do_node $ost1node mkdir -p $ost1mnt
+ [ $? -eq 0 ] || { error "Unable to create $ost1mnt"; return 23; }
do_node $ost1node mount -t $FSTYPE $ost1_dev $ost1mnt $OST_MOUNT_OPTS
[ $? -eq 0 ] || { error "Unable to mount ost1 as ldiskfs"; return 12; }
diff_files_xattrs $ost1node $ost1tmp/objects $ost1tmp/object_xattrs $objects
[ $? -eq 0 ] || { error "Unable to diff objects"; return 16; }
- do_node $ost1node "umount $ost1_dev"
+ do_node $ost1node "umount $ost1mnt"
[ $? -eq 0 ] || { error "Unable to umount ost1 as ldiskfs"; return 17; }
start_ost
tmax=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
tstarted=$(do_facet $facet "lctl get_param -n ${paramp}.threads_started" || echo 0)
lassert 23 "$msg (PDSH problems?)" '(($tstarted && $tmin && $tmax))' || return $?
- lassert 24 "$msg" '(($tstarted >= $tmin && $tstarted <= tmax ))' || return $?
+ lassert 24 "$msg" '(($tstarted >= $tmin && $tstarted <= $tmax ))' || return $?
- # Check that we can lower min/max
- do_facet $facet "lctl set_param ${paramp}.threads_min=$((tmin - 1))"
- do_facet $facet "lctl set_param ${paramp}.threads_max=$((tmax - 10))"
+ # Check that we can change min/max
+ do_facet $facet "lctl set_param ${paramp}.threads_min=$((tmin + 1))"
+ do_facet $facet "lctl set_param ${paramp}.threads_max=$((tmax - 1))"
tmin2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
tmax2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
- lassert 25 "$msg" '(($tmin2 == ($tmin - 1) && $tmax2 == ($tmax -10)))' || return $?
+ lassert 25 "$msg" '(($tmin2 == ($tmin + 1) && $tmax2 == ($tmax -1)))' || return $?
# Check that we can set min/max to the same value
- do_facet $facet "lctl set_param ${paramp}.threads_min=$tmin"
+ tmin=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
do_facet $facet "lctl set_param ${paramp}.threads_max=$tmin"
tmin2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
tmax2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
do_facet $facet "lctl set_param ${paramp}.threads_max=$((tmin - 1))"
tmin2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
tmax2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
- lassert 27 "$msg" '(($tmin <= $tmax2))' || return $?
+ lassert 27 "$msg" '(($tmin2 <= $tmax2))' || return $?
# We need to ensure that we get the module options desired; to do this
# we set LOAD_MODULES_REMOTE=true and we call setmodopts below.
}
run_test 53b "check MDT thread count params"
-if ! combined_mgs_mds ; then
- stop mgs
-fi
-
-run_llverfs()
-{
- local dir=$1
- local partial_arg=""
- local size=$(df -B G $dir | tail -1 | awk '{print $2}' | sed 's/G//') # Gb
-
- # Run in partial (fast) mode if the size
- # of a partition > 10 GB
- [ $size -gt 10 ] && partial_arg="-p"
-
- llverfs $partial_arg $dir
-}
-
test_54a() {
- do_rpc_nodes $(facet_host ost1) run_llverdev $(ostdevname 1)
+ do_rpc_nodes $(facet_host ost1) run_llverdev $(ostdevname 1) -p
[ $? -eq 0 ] || error "llverdev failed!"
reformat_and_config
}
-run_test 54a "llverdev"
+run_test 54a "test llverdev and partial verify of device"
test_54b() {
setup
- run_llverfs $MOUNT
+ run_llverfs $MOUNT -p
[ $? -eq 0 ] || error "llverfs failed!"
cleanup
}
-run_test 54b "llverfs"
+run_test 54b "test llverfs and partial verify of filesystem"
lov_objid_size()
{
local ostdev=$(ostdevname 1)
local saved_opts=$OST_MKFS_OPTS
- for i in 0 1023 2048
+ for i in 1023 2048
do
OST_MKFS_OPTS="$saved_opts --index $i"
reformat
mount_client $MOUNT || error "Unable to mount client"
echo ok
$LFS osts
+ [ -n "$ENABLE_QUOTA" ] && { $LFS quotacheck -ug $MOUNT || error "quotacheck has failed" ; }
stopall
reformat
}
run_test 56 "check big indexes"
+test_57a() { # bug 22656
+ local NID=$(do_facet ost1 "$LCTL get_param nis" | tail -1 | awk '{print $1}')
+ writeconf
+ do_facet ost1 "$TUNEFS --failnode=$NID `ostdevname 1`" || error "tunefs failed"
+ start_mgsmds
+ start_ost && error "OST registration from failnode should fail"
+ reformat
+}
+run_test 57a "initial registration from failnode should fail (should return errs)"
+
+test_57b() {
+ local NID=$(do_facet ost1 "$LCTL get_param nis" | tail -1 | awk '{print $1}')
+ writeconf
+ do_facet ost1 "$TUNEFS --servicenode=$NID `ostdevname 1`" || error "tunefs failed"
+ start_mgsmds
+ start_ost || error "OST registration from servicenode should not fail"
+ reformat
+}
+run_test 57b "initial registration from servicenode should not fail"
+
count_osts() {
do_facet mgs $LCTL get_param mgs.MGS.live.$FSNAME | grep OST | wc -l
}
+test_58() { # bug 22658
+ [ "$FSTYPE" != "ldiskfs" ] && skip "not supported for $FSTYPE" && return
+ setup
+ mkdir -p $DIR/$tdir
+ createmany -o $DIR/$tdir/$tfile-%d 100
+ # make sure that OSTs do not cancel llog cookies before we unmount the MDS
+#define OBD_FAIL_OBD_LOG_CANCEL_NET 0x601
+ do_facet mds "lctl set_param fail_loc=0x601"
+ unlinkmany $DIR/$tdir/$tfile-%d 100
+ stop mds
+ local MNTDIR=$(facet_mntpt mds)
+ # remove all files from the OBJECTS dir
+ do_facet mds "mount -t ldiskfs $MDSDEV $MNTDIR"
+ do_facet mds "find $MNTDIR/OBJECTS -type f -delete"
+ do_facet mds "umount $MNTDIR"
+ # restart MDS with missing llog files
+ start_mds
+ do_facet mds "lctl set_param fail_loc=0"
+ reformat
+}
+run_test 58 "missing llog files must not prevent MDT from mounting"
+
test_59() {
start_mgsmds >> /dev/null
local C1=$(count_osts)
[ $C4 -eq 2 ] || error "OST2 writeconf should add log"
stop_ost2 >> /dev/null
cleanup_nocli >> /dev/null
+ #writeconf to remove all ost2 traces for subsequent tests
+ writeconf
}
run_test 59 "writeconf mount option"
+test_60() { # LU-471
+ add mds1 $MDS_MKFS_OPTS --mkfsoptions='\" -E stride=64 -O ^uninit_bg\"' --reformat $(mdsdevname 1)
+
+ dump=$(do_facet $SINGLEMDS dumpe2fs $(mdsdevname 1))
+ rc=${PIPESTATUS[0]}
+ [ $rc -eq 0 ] || error "dumpe2fs $(mdsdevname 1) failed"
+
+ # MDT default has dirdata feature
+ echo $dump | grep dirdata > /dev/null || error "dirdata is not set"
+ # we disable uninit_bg feature
+ echo $dump | grep uninit_bg > /dev/null && error "uninit_bg is set"
+ # we set stride extended options
+ echo $dump | grep stride > /dev/null || error "stride is not set"
+ reformat
+}
+run_test 60 "check mkfs.lustre --mkfsoptions -E -O options setting"
+
+if ! combined_mgs_mds ; then
+ stop mgs
+fi
+
cleanup_gss
-equals_msg `basename $0`: test complete
-[ -f "$TESTSUITELOG" ] && cat $TESTSUITELOG && grep -q FAIL $TESTSUITELOG && exit 1 || true
+
+# restore the ${facet}_MKFS_OPTS variables
+for facet in MGS MDS OST; do
+ opts=SAVED_${facet}_MKFS_OPTS
+ if [[ -n ${!opts} ]]; then
+ eval ${facet}_MKFS_OPTS=\"${!opts}\"
+ fi
+done
+
+complete $(basename $0) $SECONDS
+exit_status