ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT 32newtarball"
# bug number for skipped test: LU-11915
-ALWAYS_EXCEPT="$ALWAYS_EXCEPT 110"
+ALWAYS_EXCEPT="$ALWAYS_EXCEPT 110"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
if $SHARED_KEY; then
# bug number for skipped tests: LU-9795 (all below)
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 0 31 32a 32d 35a"
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 53a 53b 54b 76a 76b"
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 76c 76d 78 103"
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 84 86 103"
fi
if ! combined_mgs_mds; then
# and stop to generate the startup logs.
start_mds
start_ost
- wait_osc_import_state mds ost FULL
+ wait_osc_import_state mds ost FULL
stop_ost
stop_mds
}
}
reformat() {
- formatall
+ formatall
}
start_mgs () {
start $facet ${dev} $MDS_MOUNT_OPTS $@ || return 94
}
+stop_mdt_no_force() {
+ local num=$1
+ local facet=mds$num
+ local dev=$(mdsdevname $num)
+ shift 1
+
+ echo "stop mds service on `facet_active_host $facet`"
+ stop $facet || return 97
+}
+
stop_mdt() {
local num=$1
local facet=mds$num
for num in $(seq $MDSCOUNT); do
start_mdt $num $@ || return 94
done
+ for num in $(seq $MDSCOUNT); do
+ wait_clients_import_state ${CLIENTS:-$HOSTNAME} mds${num} FULL
+ done
}
start_mgsmds() {
}
stop_mgs() {
- echo "stop mgs service on `facet_active_host mgs`"
- # These tests all use non-failover stop
- stop mgs -f || return 97
+ echo "stop mgs service on `facet_active_host mgs`"
+ # These tests all use non-failover stop
+ stop mgs -f || return 97
}
start_ost() {
echo "start ost1 service on `facet_active_host ost1`"
start ost1 $(ostdevname 1) $OST_MOUNT_OPTS $@ || return 95
+ wait_clients_import_state ${CLIENTS:-$HOSTNAME} ost1 FULL
}
stop_ost() {
start_ost2() {
echo "start ost2 service on `facet_active_host ost2`"
start ost2 $(ostdevname 2) $OST_MOUNT_OPTS $@ || return 92
+ wait_clients_import_state ${CLIENTS:-$HOSTNAME} ost2 FULL
}
stop_ost2() {
do_facet client "cp /etc/passwd $DIR/a" || return 71
do_facet client "rm $DIR/a" || return 72
# make sure lustre is actually mounted (touch will block,
- # but grep won't, so do it after)
- do_facet client "grep $MOUNT' ' /proc/mounts > /dev/null" || return 73
+ # but grep won't, so do it after)
+ do_facet client "grep $MOUNT' ' /proc/mounts > /dev/null" || return 73
echo "setup single mount lustre success"
}
run_test 5h "start mdt failure at mdt_fs_setup()"
test_5i() {
+ (( $MDS1_VERSION >= $(version_code 2.12.54) )) ||
+ skip "Need MDS version at least 2.12.54"
+
setup
stop mds1
}
run_test 9 "test ptldebug and subsystem for mkfs"
+test_10a() {
+ setup
+
+ if ! combined_mgs_mds; then
+ files=$(do_facet mgs "find /{proc/fs,sys/fs,sys/kernel/debug}/lustre -type l -exec test ! -e {} \; -print")
+ [ -z $files ] || echo "MGS $files is a broken symlink"
+ fi
+
+ files=$(do_facet mds1 "find /{proc/fs,sys/fs,sys/kernel/debug}/lustre -type l -exec test ! -e {} \; -print")
+ [ -z $files ] || echo "MDS $files is a broken symlink"
+
+ files=$(do_facet ost1 "find /{proc/fs,sys/fs,sys/kernel/debug}/lustre -type l -exec test ! -e {} \; -print")
+ [ -z $files ] || echo "OSS $files is a broken symlink"
+
+ files=$(do_facet client "find /{proc/fs,sys/fs,sys/kernel/debug}/lustre -type l -exec test ! -e {} \; -print")
+ [ -z $files ] || echo "clients $files is a broken symlink"
+
+ cleanup || error "cleanup failed with rc $?"
+}
+run_test 10a "find lctl param broken symlinks"
+
#
# Test 16 was to "verify that lustre will correct the mode of OBJECTS".
# But with new MDS stack we don't care about the mode of local objects
echo $T32_BLIMIT > $tmp/img/blimit
echo $T32_ILIMIT > $tmp/img/ilimit
+ $MULTIOP /mnt/$FSNAME/orph_file Ouw_c&
+ pid=$!
+ sync
+ stop_mdt_no_force 1
+ debugfs -R "ls /PENDING" ${MDSDEV1:-$MDSDEV}
+ cp ${MDSDEV1:-$MDSDEV} $tmp/img
+ start_mdt 1
+ kill -s USR1 $pid
+ wait $pid
+
stopall
pushd $tmp/src
uname -r >$tmp/img/kernel
uname -m >$tmp/img/arch
- mv ${MDSDEV1:-$MDSDEV} $tmp/img
for num in $(seq 2 $MDSCOUNT); do
local devname=$(mdsdevname $num)
local facet=mds$num
local writeconf=$2
local dne_upgrade=${dne_upgrade:-"no"}
local dom_upgrade=${dom_upgrade:-"no"}
+ local project_upgrade=${project_upgrade:-"no"}
local ff_convert=${ff_convert:-"no"}
local shall_cleanup_mdt=false
local shall_cleanup_mdt1=false
error_noexit "import zfs pool failed"
return 1
}
+ elif [ "$project_upgrade" != "no" ]; then
+ ! $r tune2fs -O project $mdt_dev &&
+ error_noexit "enable project on mdt0 failed" &&
+ return 1
+ $mdt2_is_available && ! $r tune2fs "-O project" $mdt2_dev &&
+ error_noexit "enable project on mdt failed" &&
+ return 1
+ ! $r tune2fs -O project $ost_dev &&
+ error_noexit "enable project on mdt failed" &&
+ return 1
fi
$r $LCTL set_param debug="$PTLDEBUG"
mkfsoptions="--mkfsoptions=\\\"-J size=8\\\""
fi
- add $SINGLEMDS $(mkfs_opts mds2 $fs2mdsdev $fsname) --reformat \
- $mkfsoptions $fs2mdsdev $fs2mdsvdev > /dev/null || {
+ add $SINGLEMDS $(mds2failover_HOST="" \
+ mkfs_opts mds2 $fs2mdsdev $fsname) --reformat \
+ $mkfsoptions $fs2mdsdev $fs2mdsvdev > /dev/null || {
error_noexit "Mkfs new MDT failed"
return 1
}
shall_cleanup_lustre=true
$r $LCTL set_param debug="$PTLDEBUG"
- # Leave re-enabling this to a separate patch for LU-11558
- # t32_verify_quota $SINGLEMDS $fsname $tmp/mnt/lustre || {
- # error_noexit "verify quota failed"
- # return 1
- #}
+ t32_verify_quota $SINGLEMDS $fsname $tmp/mnt/lustre || {
+ error_noexit "verify quota failed"
+ return 1
+ }
if $r test -f $tmp/list; then
#
$LFS setdirstripe -D -c2 $tmp/mnt/lustre/striped_dir
pushd $tmp/mnt/lustre
- tar -cf - . --exclude=./striped_dir \
- --exclude=./striped_dir_old \
- --exclude=./remote_dir |
+ tar -c --exclude=./striped_dir \
+ --exclude=./striped_dir_old \
+ --exclude=./remote_dir -f - .|
tar -xvf - -C striped_dir 1>/dev/null || {
error_noexit "cp to striped dir failed"
return 1
}
shall_cleanup_lustre=false
else
+ $MOUNT_CMD $nid:/$fsname $tmp/mnt/lustre || {
+ error_noexit "Mounting the client"
+ return 1
+ }
+
+ if [ "$mds1_FSTYPE" == ldiskfs -a \
+ "$project_upgrade" != "no" ]; then
+ ! $LFS project -d -p 1 $tmp/mnt/lustre/* &&
+ error_noexit "set project failed" &&
+ return 1
+ fi
+
+ [[ $(do_facet mds1 pgrep orph_.*-MDD | wc -l) == 0 ]] ||
+ error "MDD orphan cleanup thread not quit"
+
+ umount $tmp/mnt/lustre || {
+ error_noexit "Unmounting the client"
+ return 1
+ }
+
if [[ "$dne_upgrade" != "no" ]] || $mdt2_is_available; then
$r $UMOUNT $tmp/mnt/mdt1 || {
error_noexit "Unmounting the MDT2"
t32_check
for tarball in $tarballs; do
+ banner "testing $tarball upgrade"
t32_test $tarball || let "rc += $?"
done
return $rc
t32_check
for tarball in $tarballs; do
+ banner "testing $tarball upgrade with writeconf"
t32_test $tarball writeconf || let "rc += $?"
done
return $rc
t32_check
for tarball in $tarballs; do
# Do not support 1_8 and 2_1 direct upgrade to DNE2 anymore */
- echo $tarball | grep "1_8" && continue
- echo $tarball | grep "2_1" && continue
+ [[ "$tarball" =~ "1_8" ]] && echo "skip $tarball" && continue
+ [[ "$tarball" =~ "2_1" ]] && echo "skip $tarball" && continue
+ banner "testing $tarball upgrade with DNE"
load_modules
dne_upgrade=yes t32_test $tarball writeconf || rc=$?
done
t32_check
for tarball in $tarballs; do
- ff_convert=yes t32_test $tarball || rc=$?
+ banner "testing $tarball upgrade with ff convert and project upgrade"
+ project_upgrade="no"
+ [[ "$MDS1_VERSION" -ge $(version_code 2.13.54) ]] &&
+ [[ "$tarball" =~ "disk2_4-ldiskfs" ]] &&
+ project_upgrade="yes"
+ project_upgrade=$project_upgrade ff_convert=yes t32_test \
+ $tarball || rc=$?
done
return $rc
}
-run_test 32d "convert ff test"
+run_test 32d "convert ff and project quota upgrade test"
test_32e() {
[[ "$MDS1_VERSION" -ge $(version_code 2.10.56) ]] ||
t32_check
for tarball in $tarballs; do
- echo $tarball | grep "2_9" || continue
+ [[ "$tarball" =~ "2_9" ]] || continue
#load_modules
+ banner "testing $tarball upgrade with DoM"
dom_upgrade=yes t32_test $tarball writeconf || let "rc += $?"
done
return $rc
echo "222" > $DIR/$tfile-rootfile || error "write 2 failed"
chmod go-rw $DIR/$tfile-rootfile || error "chmod 2 faield"
- mkdir $DIR/$tdir-rootdir || error "mkdir failed"
+ mkdir_on_mdt0 $DIR/$tdir-rootdir || error "mkdir failed"
chmod go-rwx $DIR/$tdir-rootdir || error "chmod 3 failed"
touch $DIR/$tdir-rootdir/tfile-1 || error "touch failed"
start_ost2 || error "Unable to start OST2"
mount_client $MOUNT || error "client start failed"
- mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
+ mkdir_on_mdt0 $DIR/$tdir || error "mkdir $DIR/$tdir failed"
if [[ $PERM_CMD == *"set_param -P"* ]]; then
$PERM_CMD mdc.${FSNAME}-MDT0001-mdc-*.active=0 &&
skip "ldiskfs module has not been loaded"
fi
+ if grep -q "CONFIG_DEBUG_LOCK_ALLOC=y" /boot/config-$(uname -r); then
+ skip "test is not compatible with CONFIG_DEBUG_LOCK_ALLOC=y"
+ fi
+
echo "$inode_slab ldiskfs inodes per page"
[ "${inode_slab%.*}" -ge "3" ] && return 0
if [ $num_create -gt 0 ]; then
# Check the number of inodes available on OST0
local files=0
- local ifree=$($LFS df -i $MOUNT | awk '/OST0000/ { print $4 }')
- log "On OST0, $ifree inodes available. Want $num_create."
+ local ifree=$($LFS df -i $MOUNT |
+ awk '/OST0000/ { print $4 }'; exit ${PIPESTATUS[0]})
+ log "On OST0, $ifree inodes available. Want $num_create. rc=$?"
$LFS setstripe -i 0 $DIR/$tdir ||
error "$LFS setstripe -i 0 $DIR/$tdir failed"
local idx=$($LFS getstripe -i $DIR/$tdir/$tfile-last)
[ $idx -ne 0 ] && error "$DIR/$tdir/$tfile-last on $idx not 0" || true
- local iused=$($LFS df -i $MOUNT | awk '/OST0000/ { print $3 }')
- log "On OST0, $iused used inodes"
+ local iused=$($LFS df -i $MOUNT |
+ awk '/OST0000/ { print $3 }'; exit ${PIPESTATUS[0]})
+ log "On OST0, $iused used inodes rc=$?"
[ $iused -ge $((ost_max_pre/2 + 1000)) ] &&
error "OST replacement created too many inodes; $iused"
cleanup || error "cleanup failed with $?"
mount_client $MOUNT || error "mount client $MOUNT failed"
wait_osts_up
- $LFS df $MOUNT || error "$LFS df $MOUNT failed"
+ $LFS df $MOUNT
+ check_lfs_df_ret_val $? || error "$LFS df $MOUNT failed"
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
stack_trap "do_nodes $(comma_list $(mdts_nodes)) \
mount_client $MOUNT || error "mount client $MOUNT failed"
wait_osts_up
- $LFS df $MOUNT || error "$LFS df $MOUNT failed"
+ $LFS df $MOUNT
+ check_lfs_df_ret_val $? || error "$LFS df $MOUNT failed"
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
# Create a new pool and add OSTs into it.
error "format ost1 error"
if ! test -b $dev; then
- mnt_opts=$(csa_add "$OST_MOUNT_OPTS" -o loop)
+ mnt_opts=$(csa_add "$OST_MOUNT_FS_OPTS" -o loop)
fi
echo "mnt_opts $mnt_opts"
do_facet ost1 mount -t "$ost1_FSTYPE" $dev \
[[ "$MDS1_VERSION" -ge $(version_code 2.7.56) ]] ||
skip "Need server version newer than 2.7.55"
- local OST_OPTS="$(mkfs_opts ost1 $(ostdevname 1)) \
- --reformat $(ostdevname 1) $(ostvdevname 1)"
-
local NEWSIZE=1024
local OLDSIZE=$(do_facet ost1 "$DEBUGFS -c -R stats $(ostdevname 1)" |
awk '/Flex block group size: / { print $NF; exit; }')
- local opts=OST_OPTS
- if [[ ${!opts} != *mkfsoptions* ]]; then
- eval opts=\"${!opts} \
- --mkfsoptions='\\\"-O flex_bg -G $NEWSIZE\\\"'\"
- else
- val=${!opts//--mkfsoptions=\\\"/ \
- --mkfsoptions=\\\"-O flex_bg -G $NEWSIZE }
- eval opts='${val}'
- fi
+ [ "$OLDSIZE" == "$NEWSIZE" ] && skip "$NEWSIZE groups already"
+ local opts=" -O flex_bg -G $NEWSIZE"
+ opts=$(OST_FS_MKFS_OPTS+="$opts" mkfs_opts ost1 $(ostdevname 1))
+ opts+=" --reformat $(ostdevname 1) $(ostvdevname 1)"
echo "params: $opts"
trap cleanup_86 EXIT ERR
skip "ldiskfs only test"
[[ $OSTCOUNT -gt 59 ]] &&
skip "Ignore wide striping situation"
+ [ -n "$FILESET" ] && skip "Not functional for FILESET set"
local mdsdev=$(mdsdevname 1)
local mdsvdev=$(mdsvdevname 1)
more than $left_size-byte space left in inode."
echo "Verified: at most $left_size-byte space left in inode."
- umount_ldiskfs $SINGLEMDS
+ unmount_ldiskfs $SINGLEMDS
for i in $(seq $OSTCOUNT); do
stop ost$i -f || error "stop ost$i failed"
stopall
- [ "$mds1_FSTYPE" == zfs ] && import_zpool mds1
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
+ import_zpool mds1 || return ${PIPESTATUS[0]}
+ fi
+
# Check that parameters are added correctly
echo "tunefs --param $key=$val1"
- do_facet mds "$TUNEFS --param $key=$val1 $mdsdev >/dev/null" ||
+ do_facet mds1 "$TUNEFS --param $key=$val1 $mdsdev >/dev/null" ||
error "tunefs --param $key=$val1 failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
# Check that parameters replace existing instances when added
echo "tunefs --param $key=$val2"
- do_facet mds "$TUNEFS --param $key=$val2 $mdsdev >/dev/null" ||
+ do_facet mds1 "$TUNEFS --param $key=$val2 $mdsdev >/dev/null" ||
error "tunefs --param $key=$val2 failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
# Check that a parameter is erased properly
echo "tunefs --erase-param $key"
- do_facet mds "$TUNEFS --erase-param $key $mdsdev >/dev/null" ||
+ do_facet mds1 "$TUNEFS --erase-param $key $mdsdev >/dev/null" ||
error "tunefs --erase-param $key failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
error "on-disk parameter not erased correctly via tunefs"
# Check that all the parameters are erased
+ do_facet mds1 "$TUNEFS --param $key=$val1 $mdsdev >/dev/null" ||
+ error "tunefs --param $key=$val1 failed"
echo "tunefs --erase-params"
- do_facet mds "$TUNEFS --erase-params $mdsdev >/dev/null" ||
+ do_facet mds1 "$TUNEFS --erase-params $mdsdev >/dev/null" ||
error "tunefs --erase-params failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
- [ -z $params ] ||
- error "all on-disk parameters not erased correctly via tunefs"
+ params=$(echo $params | tr ' ' '\n')
+ [ -z "$params" ] ||
+ error "all on-disk parameters not erased correctly via tunefs $params"
# Check the order of options --erase-params and --param
echo "tunefs --param $key=$val1 --erase-params"
- do_facet mds \
+ do_facet mds1 \
"$TUNEFS --param $key=$val1 --erase-params $mdsdev >/dev/null"||
error "tunefs --param $key=$val1 --erase-params failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
}
run_test 90b "check max_mod_rpcs_in_flight is enforced after update"
+save_params_90c() {
+ # get max_rpcs_in_flight value
+ mrif_90c=$($LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight)
+ echo "max_rpcs_in_flight is $mrif_90c"
+
+ # get max_mod_rpcs_in_flight value
+ mmrif_90c=$($LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight)
+ echo "max_mod_rpcs_in_flight is $mmrif_90c"
+
+ # get MDT max_mod_rpcs_per_client value
+ mmrpc_90c=$(do_facet mds1 \
+ cat /sys/module/mdt/parameters/max_mod_rpcs_per_client)
+ echo "max_mod_rpcs_per_client is $mmrpc_90c"
+}
+
+restore_params_90c() {
+ trap 0
+
+ # restore max_rpcs_in_flight value
+ do_facet mgs $LCTL set_param -P \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$mrif_90c
+
+ # restore max_mod_rpcs_in_flight value
+ do_facet mgs $LCTL set_param -P \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mmrif_90c
+
+ # restore MDT max_mod_rpcs_per_client value
+ do_facet mds1 "echo $mmrpc_90c > \
+ /sys/module/mdt/parameters/max_mod_rpcs_per_client"
+}
+
test_90c() {
local tmp
- local mrif
- local mmrpc
setup
skip "Client not able to send multiple modify RPCs in parallel"
fi
- # get max_rpcs_in_flight value
- mrif=$($LCTL get_param -n mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight)
- echo "max_rpcs_in_flight is $mrif"
-
- # get MDT max_mod_rpcs_per_client
- mmrpc=$(do_facet mds1 \
- cat /sys/module/mdt/parameters/max_mod_rpcs_per_client)
- echo "max_mod_rpcs_per_client is $mmrpc"
+ save_params_90c
+ stack_trap restore_params_90c
# testcase 1
# attempt to set max_mod_rpcs_in_flight to max_rpcs_in_flight value
# prerequisite: set max_mod_rpcs_per_client to max_rpcs_in_flight value
- umount_client $MOUNT
- do_facet mds1 \
- "echo $mrif > /sys/module/mdt/parameters/max_mod_rpcs_per_client"
- mount_client $MOUNT
+ do_facet mds1 "echo $mrif_90c > \
+ /sys/module/mdt/parameters/max_mod_rpcs_per_client"
- $LCTL set_param \
- mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mrif &&
- error "set max_mod_rpcs_in_flight to $mrif should fail"
+ # if max_mod_rpcs_in_flight is set to be equal to or larger than
+ # max_rpcs_in_flight, then max_rpcs_in_flight will be increased
+ if [[ "$CLIENT_VERSION" -ge $(version_code 2.13.53) ]]; then
+ $LCTL set_param \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mrif_90c ||
+ error "set max_mod_rpcs_in_flight to $mrif_90c failed"
+
+ local new_mrif=$($LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight)
+ ((new_mrif == mrif_90c + 1)) ||
+ error "max_rpcs_in_flight was not increased"
+ fi
umount_client $MOUNT
- do_facet mds1 \
- "echo $mmrpc > /sys/module/mdt/parameters/max_mod_rpcs_per_client"
+ do_facet mds1 "echo $mmrpc_90c > \
+ /sys/module/mdt/parameters/max_mod_rpcs_per_client"
mount_client $MOUNT
# testcase 2
# attempt to set max_mod_rpcs_in_flight to max_mod_rpcs_per_client+1
# prerequisite: set max_rpcs_in_flight to max_mod_rpcs_per_client+2
$LCTL set_param \
- mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$((mmrpc + 2))
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$((mmrpc_90c + 2))
$LCTL set_param \
- mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$((mmrpc + 1)) &&
- error "set max_mod_rpcs_in_flight to $((mmrpc + 1)) should fail"
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$((mmrpc_90c + 1)) &&
+ error "set max_mod_rpcs_in_flight to $((mmrpc_90c + 1)) should fail"
+
+ # testcase 3
+ # attempt to set max_mod_rpcs_in_flight permanently
+ do_facet mgs $LCTL set_param -P \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$mrif_90c
+
+ do_facet mgs $LCTL set_param -P \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mrif_90c
+
+ remount_client $MOUNT
+
+ wait_update_facet --verbose client "$LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight" \
+ "$((mrif_90c + 1))" ||
+ error "expected '$((mrif_90c + 1))' for max_rpcs_in_flight"
+ wait_update_facet --verbose client "$LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight" \
+ "$mrif_90c" ||
+ error "expected '$mrif_90c' for max_mod_rpcs_in_flight"
+
+ restore_params_90c
cleanup
}
run_test 90c "check max_mod_rpcs_in_flight update limits"
check_uuid_on_mdt() {
local nid=$1
- do_facet $SINGLEMDS "$LCTL get_param mdt.${FSNAME}*.exports.'$nid'.uuid"
+ do_facet $SINGLEMDS "$LCTL get_param mdt.${mds1_svc}*.exports.'$nid'.uuid"
}
test_91() {
echo "evict $nid"
do_facet $SINGLEMDS \
"$LCTL set_param -n mdt.${mds1_svc}.evict_client nid:$nid"
+ sleep 1 # eviction above is async, give it some time to proceed
found=$(check_uuid_on_mdt $nid | grep $uuid)
[ -n "$found" ] && error "found $uuid $nid on MDT"
local ldevconfpath=$1
local fstype=
local fsldevformat=""
- touch $ldevconfpath
+ rm -f $ldevconfpath
- fstype=$(facet_fstype mgs)
- if [ "$fstype" == zfs ]; then
- fsldevformat="$fstype:"
- else
+ local facets="mgs,$(get_facets OST),$(get_facets MDS)"
+ for facet in ${facets//,/ }; do
fsldevformat=""
- fi
-
- printf "%s\t-\t%s-MGS0000\t%s%s\n" \
- $mgs_HOST \
- $FSNAME \
- $fsldevformat \
- $(mgsdevname) > $ldevconfpath
-
- local mdsfo_host=$mdsfailover_HOST;
- if [ -z "$mdsfo_host" ]; then
- mdsfo_host="-"
- fi
-
- for num in $(seq $MDSCOUNT); do
- fstype=$(facet_fstype mds$num)
- if [ "$fstype" == zfs ]; then
- fsldevformat="$fstype:"
- else
- fsldevformat=""
- fi
-
- printf "%s\t%s\t%s-MDT%04d\t%s%s\n" \
- $mds_HOST \
- $mdsfo_host \
- $FSNAME \
- $num \
- $fsldevformat \
- $(mdsdevname $num) >> $ldevconfpath
- done
-
- local ostfo_host=$ostfailover_HOST;
- if [ -z "$ostfo_host" ]; then
- ostfo_host="-"
- fi
-
- for num in $(seq $OSTCOUNT); do
- fstype=$(facet_fstype ost$num)
- if [ "$fstype" == zfs ]; then
- fsldevformat="$fstype:"
- else
- fsldevformat=""
+ fstype=$(facet_fstype $facet)
+ [ "$fstype" = zfs ] && fsldevformat="$fstype:"
+ local host=$(facet_host $facet)
+ local fo="-"
+ local varfo=${facet}failover_HOST
+ if [ $facet == mgs ] && combined_mgs_mds; then
+ varfo=mds1failover_HOST
fi
-
- printf "%s\t%s\t%s-OST%04d\t%s%s\n" \
- $ost_HOST \
- $ostfo_host \
+ [ -n "${!varfo}" ] && fo=${!varfo}
+ local type=$(echo $facet | tr -d "[:digit:]" | \
+ tr "[:lower:]" "[:upper:]" | sed s/MDS/MDT/ )
+ local num=1
+ [ ${facet} == mgs ] ||
+ num=$(facet_number $facet)
+ printf "%s\t%s\t%s-%s%04x\t%s%s\n" \
+ ${host} \
+ ${fo} \
$FSNAME \
- $num \
+ $type \
+ $(( num - 1 )) \
$fsldevformat \
- $(ostdevname $num) >> $ldevconfpath
+ $(facet_device $facet) >> $ldevconfpath
done
echo "----- $ldevconfpath -----"
}
compare_ldev_output() {
- ldev_output=$1
- expected_output=$2
+ local ldev_output=$1
+ local expected_output=$2
sort $expected_output -o $expected_output
sort $ldev_output -o $ldev_output
generate_nids $NIDSPATH
# echo the mgs nid and compare it to environment variable MGSNID
- # also, ldev.conf and nids is a server side thing, use the OSS
- # hostname
- local output
- output=$($LDEV -c $LDEVCONFPATH -H $ost_HOST -n $NIDSPATH echo %m)
-
- echo "-- START OF LDEV OUTPUT --"
- echo -e "$output"
- echo "--- END OF LDEV OUTPUT ---"
-
- # ldev failed, error
- if [ $? -ne 0 ]; then
- rm $LDEVCONFPATH $NIDSPATH
- error "ldev failed to execute!"
- fi
-
- # need to process multiple lines because of combined MGS and MDS
- echo -e $output | awk '{ print $2 }' | while read -r line ; do
- if [ "$line" != "$MGSNID" ]; then
- rm $LDEVCONFPATH $NIDSPATH
- error "ldev failed mgs nid '$line', expected '$MGSNID'"
- fi
+ local facets="$(get_facets OST),$(get_facets MDS),mgs"
+ for facet in ${facets//,/ }; do
+ local host=$(facet_host $facet)
+ local output=$($LDEV -c $LDEVCONFPATH -H $host -n $NIDSPATH echo %m)
+
+ echo "-- START OF LDEV OUTPUT --"
+ echo -e "$output"
+ echo "--- END OF LDEV OUTPUT ---"
+
+ [ -z "$output" ] &&
+ error "ldev failed to execute!"
+
+ # need to process multiple lines because of
+ # several targets on host
+ echo -e $output | awk '{ print $2 }' | while read -r line ; do
+ [ "$line" = "$MGSNID" ] ||
+ error "ldev failed mgs nid '$line', \
+ expected '$MGSNID'"
+ done
done
-
- rm $LDEVCONFPATH $NIDSPATH
+ rm -f $LDEVCONFPATH $NIDSPATH
}
run_test 92 "ldev returns MGS NID correctly in command substitution"
printf "%s-MGS0000\n" $FSNAME > $EXPECTED_OUTPUT
for num in $(seq $MDSCOUNT); do
- printf "%s-MDT%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
+ printf "%s-MDT%04x\n" $FSNAME $((num - 1)) >> $EXPECTED_OUTPUT
done
for num in $(seq $OSTCOUNT); do
- printf "%s-OST%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
+ printf "%s-OST%04x\n" $FSNAME $((num - 1)) >> $EXPECTED_OUTPUT
done
compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
echo "$mgs_HOST-$(facet_fstype mgs)" > $EXPECTED_OUTPUT
- if [ "$mgs_HOST" == "$mds_HOST" ]; then
- for num in $(seq $MDSCOUNT); do
- echo "$mds_HOST-$(facet_fstype mds$num)" \
+ local facets="$(get_facets OST),$(get_facets MDS)"
+ for facet in ${facets//,/ }; do
+ local host=$(facet_host $facet)
+ [ "$mgs_HOST" == "$host" ] &&
+ echo "$host-$(facet_fstype $facet)" \
>> $EXPECTED_OUTPUT
- done
- fi
-
- if [ "$mgs_HOST" == "$ost_HOST" ]; then
- for num in $(seq $OSTCOUNT); do
- echo "$ost_HOST-$(facet_fstype ost$num)" \
- >> $EXPECTED_OUTPUT
- done
- fi
+ done
compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
fi
for num in $(seq $MDSCOUNT); do
- printf "%s-MDT%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
+ printf "%s-MDT%04x\n" $FSNAME $((num - 1)) >> $EXPECTED_OUTPUT
done
compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
rm $EXPECTED_OUTPUT
for num in $(seq $OSTCOUNT); do
- printf "%s-OST%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
+ printf "%s-OST%04x\n" $FSNAME $((num - 1)) >> $EXPECTED_OUTPUT
done
compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
}
run_test 100 "check lshowmount lists MGS, MDT, OST and 0@lo"
-test_101() {
+test_101a() {
local createmany_pid
local dev=$FSNAME-OST0000-osc-MDT0000
setup
unlinkmany $DIR1/$tdir/$tfile-%d 50000
cleanup
}
-run_test 101 "Race MDT->OST reconnection with create"
+run_test 101a "Race MDT->OST reconnection with create"
+
+test_101b () {
+ local dev=$FSNAME-OST0000-osc-MDT0000
+ local dir=$DIR1/$tdir
+ setup
+
+ mkdir $dir
+ $LFS setstripe -c 1 -i 0 $dir
+ do_facet $SINGLEMDS "$LCTL --device $dev deactivate;"
+#define OBD_FAIL_OSP_CON_EVENT_DELAY 0x2107
+ do_facet mds1 "$LCTL set_param fail_loc=0x80002107 fail_val=20"
+ do_facet $SINGLEMDS "$LCTL --device $dev activate;"
+ stop_ost
+ sleep 25
+ start_ost
+
+ wait_osc_import_state client ost1 FULL
+ touch $dir/$tfile || error "Can't create file"
+
+ cleanup
+}
+run_test 101b "Race events DISCONNECT and ACTIVE in osp"
test_102() {
[[ "$MDS1_VERSION" -gt $(version_code 2.9.53) ]] ||
}
run_test 108b "migrate from ZFS to ldiskfs"
-
#
# set number of permanent parameters
#
(( $val == 1 )) || error "obdfilter.$FSNAME-OST0001*.no_precreate=$val"
mount_client $MOUNT || error "mount client failed"
+ wait_osc_import_state mds1 ost1 FULL
+ wait_osc_import_state client ost1 FULL
wait_osc_import_state client ost2 FULL
$LFS setstripe -i 0 $DIR/$tfile.0 ||
sleep_maxage
$LFS setstripe -i 1 $DIR/$tfile.2 ||
error "failed to create $tfile.2 on ost1 facet"
+ # files not cleaned with ONLY_REPEAT because of client unmount below
+ rm -f $DIR/$tfile.[012]
stop_ost2 || error "stop ost2 facet failed"
cleanup
}
if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "Only applicable to ldiskfs-based MDTs"
fi
+ [ -n "$FILESET" ] && skip "Not functional for FILESET set"
local dbfs_ver=$(do_facet $SINGLEMDS $DEBUGFS -V 2>&1)
echo "$dbfs_ver" | egrep -w "1.44.3.wc1|1.44.5.wc1|1.45.2.wc1" &&
skip_env "This version of debugfs doesn't show inode number"
- is_dm_flakey_dev $SINGLEMDS $(mdsdevname 1) &&
- skip "This test can not be executed on flakey dev"
-
IMAGESIZE=$((3072 << 30)) # 3072 GiB
stopall
+
+ local saved_flakey=${FLAKEY}
+ stack_trap "FLAKEY=$saved_flakey" EXIT
+ FLAKEY=false
+
+ echo "client1: "
+ lctl dl
+ mount | grep lustre
+ echo "mds1: "
+ do_facet mds1 "hostname; lctl dl; mount"
+ echo "ost1: "
+ do_facet ost1 "hostname; lctl dl; mount"
# We need MDT size 3072GB, because it is smallest
# partition that can store 2B inodes
do_facet $SINGLEMDS "mkdir -p $TMP/$tdir"
local mdsdev=$(do_facet $SINGLEMDS "losetup -f")
do_facet $SINGLEMDS "losetup $mdsdev $mdsimgname"
- local mds_opts="$(mkfs_opts mds1 $(mdsdevname 1)) --device-size=$IMAGESIZE \
+ local mds_opts="$(mkfs_opts mds1 $(mdsdevname 1)) \
--mkfsoptions='-O ea_inode,^resize_inode,meta_bg \
- -N 2247484000 -E lazy_itable_init'"
+ -N 2247484000 -E lazy_itable_init' --device-size=$IMAGESIZE"
add mds1 $mds_opts --mgs --reformat $mdsdev ||
skip_env "format large MDT failed"
opts="$(mkfs_opts ost1 $(ostdevname 1)) \
mkdir -p $DIR/$tdir || error "mkdir $DIR/$tdir fail"
goal="/sys/fs/ldiskfs/$(basename $mdsdev)/inode_goal"
-echo goal: $goal
+ echo goal: $goal
# 2147483648 is 0x80000000
do_facet $SINGLEMDS "echo 2147483648 >> $goal; grep . $goal"
touch $DIR/$tdir/$tfile
- # attrs from 1 to 15 go to block, 16th - to inode
- for i in {1..16}; do
+ # attrs from 1 to 16 go to block, 17th - to inode
+ for i in {1..17}; do
local nm="trusted.ea$i"
setfattr -n $nm -v $(printf "xattr%0250d" $i) $DIR/$tdir/$tfile
done
+ do_facet $SINGLEMDS $DEBUGFS -c -R "stat ROOT/$tdir/$tfile" $mdsdev
+
# inode <2147483649> trusted.ea16 (255)
local inode_num=$(do_facet $SINGLEMDS \
"$DEBUGFS -c -R 'stat ROOT/$tdir/$tfile' $mdsdev" |
- awk '/ea16/ { print $2 }' |
+ awk '/ea17/ { print $2 }' |
sed -e 's/>//' -e 's/<//' -e 's/\"//')
echo "inode num: $inode_num"
[ $inode_num -ge 2147483648 ] || error "inode $inode_num too small"
MDSSIZE=$old_mdssize
MDSISIZE=$old_mdsisize
- do_facet $SINGLEMDS $MKFS $opts17t $tmpmnt/$mdtimg ||
+
+ do_facet $SINGLEMDS $MKFS \
+ ${opts17t/-E /-E lazy_itable_init,lazy_journal_init,} \
+ $tmpmnt/$mdtimg ||
error "failed to mkfs for $tmpmnt/$mdtimg"
do_facet $SINGLEMDS $TUNE2FS -l $tmpmnt/$mdtimg |
}
run_test 117 "lctl get_param return errors properly"
+test_119() {
+ local had_config
+ local size_mb
+
+ [[ "$MDSCOUNT" -ge 2 ]] || skip "Need more at least 2 MDTs"
+
+ had_config=$(do_facet mds1 "$LCTL get_param debug | grep config")
+ do_facet mds1 "$LCTL set_param debug=+config"
+ do_facet mds1 "$LCTL clear"
+
+ setup
+ do_facet mds2 "$TUNEFS --writeconf $(mdsdevname 2)" &>/dev/null
+ # mount after writeconf will make "add osp" added to mdt0 config:
+ # 53 (224)marker 60 (flags=0x01, v2.5.1.0) lustre-MDT0001 'add osp'
+ # 54 (080)add_uuid nid=... 0: 1:...
+ # 55 (144)attach 0:lustre-MDT0001-osp-MDT0000 1:osp 2:...
+ # 56 (144)setup 0:lustre-MDT0001-osp-MDT0000 1:... 2:...
+ # 57 (136)modify_mdc_tgts add 0:lustre-MDT0000-mdtlov 1:... 2:1 3:1
+ # duplicate modify_mdc_tgts caused crashes
+
+ debug_size_save
+ # using larger debug_mb size to avoid lctl dk log truncation
+ size_mb=$((DEBUG_SIZE_SAVED * 4))
+ for i in {1..3}; do
+ stop_mdt 2
+ # though config processing stops after failed attach and setup
+ # it will proceed after the failed command after each writeconf
+ # this is the original scenario of the issue
+ do_facet mds2 "$TUNEFS --writeconf $(mdsdevname 2)" &>/dev/null
+ do_facet mds1 "$LCTL set_param debug_mb=$size_mb"
+ start_mdt 2
+
+ wait_update_facet_cond mds1 \
+ "$LCTL dk | grep -c Processed.log.$FSNAME-MDT0000" \
+ ">" 1 300
+ done
+ debug_size_restore
+
+ [[ -z "$had_config" ]] && do_facet mds1 lctl set_param debug=-config
+
+ reformat
+}
+run_test 119 "writeconf on slave mdt shouldn't duplicate mdc/osp and crash"
+
test_120() { # LU-11130
[ "$MDSCOUNT" -lt 2 ] && skip "mdt count < 2"
[ "$mds1_FSTYPE" != ldiskfs ] &&
}
run_test 120 "cross-target rename should not create bad symlinks"
-test_122() {
+test_121(){
+ stopall
+ start_mgsmds || error "MGS MDS Start failed"
+ fail mgs
+ stop_mds || error "Stopping MDSes failed"
+ #failback
+ start_mds
+ fail mgs
+ stop_mds || error "Stopping MDSes failed"
+}
+run_test 121 "failover MGS"
+
+test_122a() {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
[[ "$OST1_VERSION" -ge $(version_code 2.11.53) ]] ||
skip "Need OST version at least 2.11.53"
cleanup
}
-run_test 122 "Check OST sequence update"
+run_test 122a "Check OST sequence update"
+
+test_122b() {
+ [[ "$OST1_VERSION" -ge $(version_code 2.11.53) ]] ||
+ skip "Need OST version at least 2.11.53"
+ local err
+
+ reformat
+ LOAD_MODULES_REMOTE=true load_modules
+#define OBD_FAIL_OFD_SET_OID 0x1e0
+ do_facet ost1 $LCTL set_param fail_loc=0x00001e0
+
+ stack_trap cleanup EXIT
+ setup_noconfig
+ do_facet ost1 $LCTL set_param obdfilter.*.precreate_batch=256
+ $LFS mkdir -i0 -c1 $DIR/$tdir || error "failed to create directory"
+ $LFS setstripe -i0 -c1 $DIR/$tdir || error "failed to setstripe"
+ do_facet ost1 $LCTL set_param fail_loc=0
+ # overflow IDIF 32bit and create > OST_MAX_PRECREATE*5
+ # so a new wrong sequence would differ from an original with error
+ #define OST_MAX_PRECREATE 20000
+ local ost_max_precreate=20100
+ local num_create=$(( ost_max_precreate * 5 ))
+
+ # Check the number of inodes available on OST0
+ local files=0
+ local ifree=$($LFS df -i $MOUNT |
+ awk '/OST0000/ { print $4 }'; exit ${PIPESTATUS[0]})
+
+ log "On OST0, $ifree inodes available. Want $num_create. rc=$?"
+
+ if [ $ifree -lt 10000 ]; then
+ files=$(( ifree - 50 ))
+ else
+ files=10000
+ fi
+
+ local j=$((num_create / files + 1))
+
+ for i in $(seq 1 $j); do
+ createmany -o $DIR/$tdir/$tfile-$i- $files ||
+ error "createmany fail create $files files: $?"
+ unlinkmany $DIR/$tdir/$tfile-$i- $files ||
+ error "unlinkmany failed unlink $files files"
+ done
+ sync
+ do_facet ost1 sync
+ #we need a write req during recovery for ofd_seq_load
+ replay_barrier ost1
+ dd if=/dev/urandom of=$DIR/$tdir/$tfile bs=1024k count=1 oflag=sync ||
+ error "failed to write file"
+
+ # OBD_FAIL_OST_CREATE_NET 0x204
+ do_facet ost1 $LCTL set_param fail_loc=0x80000204
+ fail ost1
+ createmany -o $DIR/$tdir/file_ 100
+ sync
+
+ err=$(do_facet ost1 dmesg | tac | sed "/Recovery over/,$ d" |
+ grep "OST replaced or reformatted")
+ [ -z "$err" ] || error $err
+}
+run_test 122b "Check OST sequence wouldn't change when IDIF 32bit overflows"
test_123aa() {
remote_mgs_nodsh && skip "remote MGS with nodsh"
local yaml
local orig_val
+ local mgs_arg=""
+
+ [[ $MGS_VERSION -gt $(version_code 2.13.54) ]] ||
+ mgs_arg="--device MGS"
orig_val=$(do_facet mgs $LCTL get_param jobid_name)
- do_facet mgs $LCTL set_param -P jobid_name="testname"
+ do_facet mgs $LCTL set_param -P jobid_name="TESTNAME"
- yaml=$(do_facet mgs $LCTL --device MGS llog_print params |
+ yaml=$(do_facet mgs $LCTL $mgs_arg llog_print params |
grep jobid_name | tail -n 1)
local param=$(awk '{ print $10 }' <<< "$yaml")
local val=$(awk '{ print $12 }' <<< "$yaml")
#return to the default
do_facet mgs $LCTL set_param -P jobid_name=$orig_val
- [ $val = "testname" ] || error "bad value: $val"
+ [ $val = "TESTNAME" ] || error "bad value: $val"
[ $param = "jobid_name," ] || error "Bad param: $param"
}
run_test 123ab "llog_print params output values from set_param -P"
local start=10
local end=50
+ local mgs_arg=""
+
+ [[ $MGS_VERSION -gt $(version_code 2.13.54) ]] ||
+ mgs_arg="--device MGS"
[ -d $MOUNT/.lustre ] || setup
# - { index: 10, event: add_uuid, nid: 192.168.20.1@tcp(0x20000c0a81401,
# node: 192.168.20.1@tcp }
- do_facet mgs $LCTL --device MGS \
+ do_facet mgs $LCTL $mgs_arg \
llog_print --start $start --end $end $FSNAME-client | tr -d , |
while read DASH BRACE INDEX idx EVENT BLAH BLAH BLAH; do
(( idx >= start )) || error "llog_print index $idx < $start"
run_test 123ad "llog_print shows all records"
test_123ae() { # LU-11566
+ local max
+ local mgs_arg=""
+ local log
+ local id
+ local orig
+ local new
+ local rpcs
+
remote_mgs_nodsh && skip "remote MGS with nodsh"
[ -d $MOUNT/.lustre ] || setupall
- local max=$($LCTL get_param -n osc.*-OST0000-*.max_dirty_mb | head -1)
+ max=$($LCTL get_param -n osc.*-OST0000-*.max_dirty_mb | head -1)
+ pgs=$($LCTL get_param -n osc.*-OST0000-*.max_pages_per_rpc | head -1)
+ [[ $MGS_VERSION -gt $(version_code 2.13.54) ]] ||
+ mgs_arg="--device MGS"
if do_facet mgs "$LCTL help llog_cancel" 2>&1| grep -q -- --log_id; then
# save one set_param -P record in case none exist
- do_facet mgs $LCTL set_param -P osc.*.max_dirty_mb=$max
- local log=params
- local orig=$(do_facet mgs $LCTL --device MGS llog_print $log |
- tail -1 | awk '{ print $4 }' | tr -d , )
+ do_facet mgs $LCTL set_param -P osc.*.max_pages_per_rpc=$pgs
+ stack_trap "do_facet mgs $LCTL set_param -P -d \
+ osc.*.max_pages_per_rpc"
+
+ log=params
+ orig=$(do_facet mgs $LCTL $mgs_arg llog_print $log |
+ tail -1 | awk '{ print $4 }' | tr -d , )
do_facet mgs $LCTL set_param -P osc.*.max_dirty_mb=$max
- do_facet mgs $LCTL --device MGS llog_print $log | tail -1 |
+ do_facet mgs $LCTL $mgs_arg llog_print $log | tail -1 |
grep "parameter: osc.*.max_dirty_mb" ||
error "new set_param -P wasn't stored in params log"
# - { index: 71, event: set_param, device: general,
# param: osc.*.max_dirty_mb, value: 256 }
- local id=$(do_facet mgs $LCTL --device MGS llog_print $log |
- tail -1 | awk '{ print $4 }' | tr -d , )
-
- do_facet mgs $LCTL --device MGS llog_cancel $log --log_idx=$id
- local new=$(do_facet mgs $LCTL --device MGS llog_print $log |
+ id=$(do_facet mgs $LCTL $mgs_arg llog_print $log |
+ tail -1 | awk '{ print $4 }' | tr -d , )
+ do_facet mgs $LCTL $mgs_arg llog_cancel $log --log_idx=$id
+ local new=$(do_facet mgs $LCTL $mgs_arg llog_print $log |
tail -1 | awk '{ print $4 }' | tr -d , )
(( new == orig )) ||
error "new llog_cancel now $new, not at $orig records"
# test old positional parameters for a while still
if [ "$MGS_VERSION" -le $(version_code 3.1.53) ]; then
log=$FSNAME-client
+
+ do_facet mgs $LCTL conf_param \
+ $FSNAME-OST0000.osc.max_pages_per_rpc=$pgs
+ stack_trap "do_facet mgs $LCTL conf_param -d \
+ $FSNAME-OST0000.osc.max_pages_per_rpc"
+
orig=$(do_facet mgs $LCTL --device MGS llog_print $log |
tail -1 | awk '{ print $4 }' | tr -d , )
do_facet mgs $LCTL conf_param $FSNAME-OST0000.osc.max_dirty_mb=$max
do_facet mgs $LCTL --device MGS llog_print $log |
tail -1 | grep "parameter: osc.max_dirty_mb" ||
error "old conf_param wasn't stored in params log"
-
+ do_facet mgs $LCTL --device MGS llog_print $log
# - { index: 71, event: conf_param, device: testfs-OST0000-osc,
# param: osc.max_dirty_mb=256 }
id=$(do_facet mgs $LCTL --device MGS llog_print $log |
tail -1 | awk '{ print $4 }' | tr -d , )
do_facet mgs $LCTL --device MGS llog_cancel $log $id
+ do_facet mgs $LCTL --device MGS llog_print $log
new=$(do_facet mgs $LCTL --device MGS llog_print $log |
tail -1 | awk '{ print $4 }' | tr -d , )
(( new == orig )) ||
}
run_test 123ae "llog_cancel can cancel requested record"
+test_123af() { #LU-13609
+ [ "$MGS_VERSION" -ge $(version_code 2.13.54) -a \
+ "$MDS1_VERSION" -ge $(version_code 2.13.54) ] ||
+ skip "Need both MGS and MDS version at least 2.13.54"
+
+ [ -d $MOUNT/.lustre ] || setupall
+ stack_trap "do_facet mds1 $LCTL set_param fail_loc=0" EXIT
+
+ local device
+ local facet
+ local cmd
+ local orig_clist
+ local orig_count
+ local new_clist
+ local new_count
+
+ for device in "MGS" "$FSNAME-MDT0000"; do
+ cmd="--device $device llog_catlist"
+ echo "lctl $cmd ..."
+ if [ "$device" = "MGS" ]; then
+ facet="mgs"
+ else
+ facet="mds1"
+ fi
+ orig_clist=($(do_facet $facet $LCTL $cmd | awk '{ print $2 }'))
+ orig_count=${#orig_clist[@]}
+ echo "orig_clist: ${orig_clist[@]}"
+
+ #define OBD_FAIL_CATLIST 0x131b
+ #fetch to llog records from the second one
+ do_facet $facet $LCTL set_param fail_loc=0x131b fail_val=2
+
+ new_clist=($(do_facet $facet $LCTL $cmd | awk '{ print $2 }'))
+ new_count=${#new_clist[@]}
+ echo "new_clist: ${new_clist[@]}"
+
+ [ $new_count -eq $((orig_count - 1)) ] ||
+ error "$new_count != $orig_count - 1"
+ for i in $(seq 0 $new_count); do
+ j=$((i + 1))
+ [ "${orig_clist[$j]}" = "${new_clist[$i]}" ] ||
+ error "${orig_clist[$j]} != ${new_clist[$i]}"
+ done
+ do_facet mds1 $LCTL set_param fail_loc=0
+ echo "done"
+ done
+}
+run_test 123af "llog_catlist can show all config files correctly"
+
+test_123ag() { # LU-15142
+ local rec
+ local orig_val
+
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ (( $MGS_VERSION >= $(version_code 2.14.55) )) ||
+ skip "Need server version least 2.14.55"
+
+ [ -d $MOUNT/.lustre ] || setup
+
+ orig_val=$(do_facet mgs $LCTL get_param jobid_name)
+ stack_trap "do_facet mgs $LCTL set_param -P jobid_name=$orig_val"
+
+ do_facet mgs $LCTL set_param -P jobid_name="TESTNAME1"
+ do_facet mgs $LCTL set_param -P -d jobid_name
+ rec=$(do_facet mgs $LCTL --device MGS llog_print params |
+ grep -c jobid_name)
+ (( rec == 0 )) || error "parameter was not deleted, check #1"
+ do_facet mgs $LCTL set_param -P jobid_name="TESTNAME1"
+ rec=$(do_facet mgs $LCTL --device MGS llog_print params |
+ grep -c jobid_name)
+ (( rec == 1)) || error "parameter is not set"
+ # usage with ordinary set_param format works too
+ do_facet mgs $LCTL set_param -P -d jobid_name="ANY"
+ rec=$(do_facet mgs $LCTL --device MGS llog_print params |
+ grep -c jobid_name)
+ (( rec == 0 )) || error "parameter was not deleted, check #2"
+}
+run_test 123ag "llog_print skips values deleted by set_param -P -d"
+
test_123F() {
remote_mgs_nodsh && skip "remote MGS with nodsh"
# set jobid_var to a different value for test
local orig_val=$(do_facet mgs $LCTL get_param jobid_var)
- do_facet mgs $LCTL set_param -P jobid_var="testname"
+ do_facet mgs $LCTL set_param -P jobid_var="TESTNAME"
for i in $cfgfiles params; do
do_facet mgs "lctl --device MGS llog_print ${i} >> $yaml_file"
echo "Writeconf"
writeconf_all
echo "Remounting"
- mountmgs
- mountmds
- mountoss
- mountcli
+ setup_noconfig
# Reapply the config from before
echo "Setting configuration parameters"
local set_val=$(do_facet mgs $LCTL get_param jobid_var)
do_facet mgs $LCTL set_param -P $orig_val
- [ $set_val == "jobid_var=testname" ] ||
- error "$set_val is not testname"
+ [ $set_val == "jobid_var=TESTNAME" ] ||
+ error "$set_val is not TESTNAME"
do_facet mgs rm "$yaml_file"
cleanup
[ -z $mds2failover_HOST ] && skip "needs MDT failover setup"
setup
+ do_facet mgs $LCTL --device MGS llog_print $FSNAME-client |
+ grep 1.2.3.4@tcp && error "Should not be fake nid"
+ do_facet mgs $LCTL conf_param $FSNAME-MDT0001.failover.node=1.2.3.4@tcp\
+ || error "Set params error"
+ do_facet mgs $LCTL --device MGS llog_print $FSNAME-client |
+ grep 1.2.3.4@tcp || error "Fake nid should be added"
cleanup
load_modules
echo "Before: ${facet} ${device} ${pre_max_sectors} ${max_hw_sectors}"
- do_facet ${facet} "libtool execute l_tunedisk ${device}"
+ do_facet ${facet} "l_tunedisk ${device}"
# Value after l_tunedisk
local post_max_sectors=$(get_max_sectors_kb ${facet} ${device})
}
run_test 125 "check l_tunedisk only tunes OSTs and their slave devices"
+test_126() {
+ [[ "$MDS1_VERSION" -ge $(version_code 2.13.52) ]] ||
+ skip "Need MDS version at least 2.13.52"
+
+ cleanup
+ do_rpc_nodes $(facet_active_host $SINGLEMDS) load_module ../libcfs/libcfs/libcfs
+ #define OBD_FAIL_OBD_SETUP 0x60d
+ do_facet mds1 $LCTL set_param fail_loc=0x60d
+ do_rpc_nodes $(facet_active_host $SINGLEMDS) load_modules &
+ for i in {1..40}; do
+ do_facet mds1 lsmod | grep -q osd_$mds1_FSTYPE && break
+ sleep 1
+ done
+ clear_failloc $SINGLEMDS 20 &
+ start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS
+}
+run_test 126 "mount in parallel shouldn't cause a crash"
+
+test_127() {
+ [[ "$ost1_FSTYPE" == ldiskfs ]] || skip "ldiskfs only test"
+
+ cleanup
+ setup
+ zconf_umount_clients $RCLIENTS $MOUNT
+
+ wait_osp_active ost ${FSNAME}-OST0000 0 1
+ local osc_tgt="$FSNAME-OST0000-osc-$($LFS getname -i $DIR)"
+ local avail1=($($LCTL get_param -n osc.${osc_tgt}.kbytesavail))
+
+ $LFS setstripe -i 0 $DIR/$tfile || error "failed creating $DIR/$tfile"
+ dd if=/dev/zero of=$DIR/$tfile bs=1M oflag=direct || true
+
+ local avail2=($($LCTL get_param -n osc.${osc_tgt}.kbytesavail))
+
+ if ((avail2 * 100 / avail1 > 1)); then
+ lfs df $DIR
+ ls -l $DIR/$tfile
+ error "more than 1% space left: before=$avail1 after=$avail2"
+ fi
+
+ local mbs=$(($(stat -c %s $DIR/$tfile) / (1024 * 1024)))
+
+ dd if=/dev/zero of=$DIR/$tfile bs=1M count=$mbs conv=notrunc \
+ oflag=direct || error "overwrite failed"
+}
+run_test 127 "direct io overwrite on full ost"
+
+test_128()
+{
+ combined_mgs_mds && skip "need separate mgs device"
+ [ "$ost2_FSTYPE" == zfs ] && import_zpool ost2
+
+ format_ost 2
+ # Try to apply nolocallogs to the virgin OST. Should fail.
+ do_facet ost2 "$TUNEFS --nolocallogs $(ostdevname 2)" &&
+ error "nolocallogs should not be allowed on the virgin target"
+
+ setupall
+ stopall
+
+ [ "$ost1_FSTYPE" == zfs ] && import_zpool ost1
+ # Start OST without MGS (local configs)
+ do_facet ost1 "$TUNEFS --dryrun $(ostdevname 1)"
+ start_ost || error "unable to start OST1"
+ stop_ost || error "Unable to stop OST1"
+
+ [ "$ost1_FSTYPE" == zfs ] && import_zpool ost1
+ # Do not allow reading local configs, should fail
+ do_facet ost1 "$TUNEFS --nolocallogs $(ostdevname 1)" ||
+ error "Can not set nolocallogs"
+ start_ost && error "OST1 started, but should fail"
+
+ # Connect to MGS successfully, reset nolocallogs flag
+ [ "$ost1_FSTYPE" == zfs ] && import_zpool ost1
+ start_mgs || error "unable to start MGS"
+ start_ost || error "unable to start OST1"
+
+ do_facet ost1 "$TUNEFS --dryrun $(ostdevname 1)" | grep "nolocallogs" &&
+ error "nolocallogs expected to be reset"
+
+ stop_ost || error "Unable to stop OST1"
+}
+run_test 128 "Force using remote logs with --nolocallogs"
+
+test_129()
+{
+ stopall
+ start_mds || error "MDS start failed"
+ format_ost 1
+ start ost1 $(ostdevname 1) $OST_MOUNT_OPTS &&
+ error "start ost1 should fail" || true
+ start ost1 $(ostdevname 1) $OST_MOUNT_OPTS &&
+ error "second start ost1 should fail" || true
+ do_facet ost1 "$TUNEFS --writeconf $(ostdevname 1)"
+ start ost1 $(ostdevname 1) $OST_MOUNT_OPTS ||
+ error "start ost1 failed"
+ stop ost1
+ stop_mds
+}
+run_test 129 "attempt to connect an OST with the same index should fail"
+
+test_130()
+{
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
+ setupall
+ stop_mdt 2 || error "mdt2 stop failed"
+ do_facet mds2 "$TUNEFS --writeconf $(mdsdevname 2)"
+ start_mdt 2 || error "mdt2 start failed"
+ do_facet mds2 "$LCTL dl" | grep MDT0001-osp-MDT0001 &&
+ error "Illegal OSP device created" || true
+}
+run_test 130 "re-register an MDT after writeconf"
+
+test_131() {
+ [ "$mds1_FSTYPE" == "ldiskfs" ] || skip "ldiskfs only test"
+ do_facet mds1 $DEBUGFS -R features $(mdsdevname 1) |
+ grep -q project || skip "skip project quota not supported"
+
+ local projid
+
+ setupall
+ test_mkdir -c $MDSCOUNT -p $DIR/$tdir
+ $LFS project -p 1000 $DIR/$tdir || error "set dir project id failed"
+ createmany -o $DIR/$tdir/f 512
+ for ((i = 0; i < 512; ++i)); do
+ $LFS project -p $i $DIR/$tdir/f${i} ||
+ error "set f${i} project id failed"
+ done
+
+ test_mkdir -c $MDSCOUNT -p $DIR/$tdir.inherit
+ $LFS project -p 1001 -s $DIR/$tdir.inherit
+ createmany -o $DIR/$tdir.inherit/f 128
+ (( $($LFS project $DIR/$tdir.inherit/f* |
+ awk '$1 == 1001 { print }' | wc -l) == 128 )) ||
+ error "files did not inherit projid 1001"
+
+ stopall
+
+ for i in $(seq $MDSCOUNT); do
+ mds_backup_restore mds$i ||
+ error "Backup/restore on mds$i failed"
+ done
+
+ setupall
+
+ projid=($($LFS project -d $DIR/$tdir))
+ [ ${projid[0]} == "1000" ] ||
+ error "projid expected 1000 not ${projid[0]}"
+ for ((i = 0; i < 512; ++i)); do
+ projid=($($LFS project $DIR/$tdir/f${i}))
+ [ ${projid[0]} == "$i" ] ||
+ error "projid expected $i not ${projid[0]}"
+ done
+
+ (( $($LFS project $DIR/$tdir.inherit/f* |
+ awk '$1 == 1001 { print }' | wc -l) == 128 )) ||
+ error "restore did not copy projid 1001"
+}
+run_test 131 "MDT backup restore with project ID"
+
if ! combined_mgs_mds ; then
stop mgs
fi
git://git.whamcloud.com / fs / lustre-release.git / blobdiff