#!/bin/bash
-# FIXME - there is no reason to use all of these different
-# return codes, espcially when most of them are mapped to something
-# else anyway. The combination of test number and return code
-# figure out what failed.
+# FIXME - there is no reason to use all of these different return codes,
+# espcially when most of them are mapped to something else anyway.
+# The tests should use error() to describe the failure more clearly,
+# and reduce the need to look into the tests to see what failed.
set -e
ONLY=${ONLY:-"$*"}
-# bug number for skipped test:
-ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT"
+# bug number for skipped test: LU-2828
+ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT 59 64"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
is_sles11() # LU-2181
. $LUSTRE/tests/test-framework.sh
init_test_env $@
+. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
# use small MDS + OST size to speed formatting time
# do not use too small MDSSIZE/OSTSIZE, which affect the default jouranl size
+# STORED_MDSSIZE is used in test_18
+STORED_MDSSIZE=$MDSSIZE
+STORED_OSTSIZE=$OSTSIZE
MDSSIZE=200000
OSTSIZE=200000
-. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
if ! combined_mgs_mds; then
# bug number for skipped test: 23954
ALWAYS_EXCEPT="$ALWAYS_EXCEPT 24b"
fi
-# STORED_MDSSIZE is used in test_18
-if [ -n "$MDSSIZE" ]; then
- STORED_MDSSIZE=$MDSSIZE
-fi
-
# pass "-E lazy_itable_init" to mke2fs to speed up the formatting time
if [[ "$LDISKFS_MKFS_OPTS" != *lazy_itable_init* ]]; then
LDISKFS_MKFS_OPTS=$(csa_add "$LDISKFS_MKFS_OPTS" -E lazy_itable_init)
fi
+[ $(facet_fstype $SINGLEMDS) = "zfs" ] &&
+# bug number for skipped test: LU-2778 LU-4444
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 57b 69"
+
init_logging
#
require_dsh_mds || exit 0
require_dsh_ost || exit 0
#
-[ "$SLOW" = "no" ] && EXCEPT_SLOW="30a 31 45"
+[ "$SLOW" = "no" ] && EXCEPT_SLOW="30a 31 45 69"
assert_DIR
-reformat() {
- formatall
-}
-
-writeconf1() {
- local facet=$1
- local dev=$2
-
- stop ${facet} -f
- rm -f ${facet}active
- # who knows if/where $TUNEFS is installed? Better reformat if it fails...
- do_facet ${facet} "$TUNEFS --quiet --writeconf $dev" ||
- { echo "tunefs failed, reformatting instead" && reformat_and_config && return 1; }
- return 0
-}
-
-writeconf() {
- # we need ldiskfs
- load_modules
- # if writeconf fails anywhere, we reformat everything
- writeconf1 mds `mdsdevname 1` || return 0
- writeconf1 ost1 `ostdevname 1` || return 0
- writeconf1 ost2 `ostdevname 2` || return 0
-}
-
gen_config() {
# The MGS must be started before the OSTs for a new fs, so start
# and stop to generate the startup logs.
gen_config
}
+writeconf_or_reformat() {
+ # There are at most 2 OSTs for write_conf test
+ # who knows if/where $TUNEFS is installed?
+ # Better reformat if it fails...
+ writeconf_all $MDSCOUNT 2 ||
+ { echo "tunefs failed, reformatting instead" &&
+ reformat_and_config && return 0; }
+ return 0
+}
+
+reformat() {
+ formatall
+}
+
start_mgs () {
echo "start mgs"
- start mgs $MGSDEV $MGS_MOUNT_OPTS
+ start mgs $(mgsdevname) $MGS_MOUNT_OPTS
}
-start_mds() {
- local facet=$SINGLEMDS
- # we can not use MDSDEV1 here because SINGLEMDS could be set not to mds1 only
- local num=$(echo $facet | tr -d "mds")
+start_mdt() {
+ local num=$1
+ local facet=mds$num
local dev=$(mdsdevname $num)
+ shift 1
+
echo "start mds service on `facet_active_host $facet`"
start $facet ${dev} $MDS_MOUNT_OPTS $@ || return 94
}
+stop_mdt() {
+ local num=$1
+ local facet=mds$num
+ local dev=$(mdsdevname $num)
+ shift 1
+
+ echo "stop mds service on `facet_active_host $facet`"
+ # These tests all use non-failover stop
+ stop $facet -f || return 97
+}
+
+start_mds() {
+ local num
+
+ for num in $(seq $MDSCOUNT); do
+ start_mdt $num $@ || return 94
+ done
+}
+
start_mgsmds() {
if ! combined_mgs_mds ; then
start_mgs
}
stop_mds() {
- echo "stop mds service on `facet_active_host $SINGLEMDS`"
- # These tests all use non-failover stop
- stop $SINGLEMDS -f || return 97
+ local num
+ for num in $(seq $MDSCOUNT); do
+ stop_mdt $num || return 97
+ done
}
stop_mgs() {
run_test 1 "start up ost twice (should return errors)"
test_2() {
- start_mds
+ start_mdt 1
echo "start mds second time.."
- start_mds && error "2nd MDT start should fail"
+ start_mdt 1 && error "2nd MDT start should fail"
start_ost
mount_client $MOUNT
check_mount || return 43
grep " $MOUNT " /etc/mtab && \
error false "unexpected entry in mtab before mount" && return 10
- [ "$(facet_fstype ost1)" = "zfs" ] &&
- skip "LU-2059: no local config for ZFS OSTs" && return
-
local rc=0
start_ost
start_mds
return
fi
- setup
- check_mount || return 41
- cleanup || return $?
+ setup
+ check_mount || return 41
+ cleanup || return $?
- echo "Remove mds config log"
- if ! combined_mgs_mds ; then
- stop mgs
- fi
+ echo "Remove mds config log"
+ if ! combined_mgs_mds ; then
+ stop mgs
+ fi
- do_facet mgs "$DEBUGFS -w -R 'unlink CONFIGS/$FSNAME-MDT0000' $MGSDEV || return \$?" || return $?
+ do_facet mgs "$DEBUGFS -w -R 'unlink CONFIGS/$FSNAME-MDT0000' \
+ $(mgsdevname) || return \$?" || return $?
- if ! combined_mgs_mds ; then
- start_mgs
- fi
+ if ! combined_mgs_mds ; then
+ start_mgs
+ fi
- start_ost
- start_mds && return 42
- reformat_and_config
+ start_ost
+ start_mds && return 42
+ reformat_and_config
}
run_test 17 "Verify failed mds_postsetup won't fail assertion (2936) (should return errs)"
log "use STORED_MDSSIZE=$STORED_MDSSIZE"
# check if the block device is large enough
- [ -z "$OK" ] && $(is_blkdev $SINGLEMDS $MDSDEV $MIN) && OK=1 &&
- myMDSSIZE=$MIN && log "use device $MDSDEV with MIN=$MIN"
+ is_blkdev $SINGLEMDS $MDSDEV $MIN
+ local large_enough=$?
+ if [ -n "$OK" ]; then
+ [ $large_enough -ne 0 ] && OK=""
+ else
+ [ $large_enough -eq 0 ] && OK=1 && myMDSSIZE=$MIN &&
+ log "use device $MDSDEV with MIN=$MIN"
+ fi
# check if a loopback device has enough space for fs metadata (5%)
run_test 19a "start/stop MDS without OSTs"
test_19b() {
- [ "$(facet_fstype ost1)" = "zfs" ] &&
- skip "LU-2059: no local config for ZFS OSTs" && return
-
start_ost || return 1
stop_ost -f || return 2
}
run_test 21a "start mds before ost, stop ost first"
test_21b() {
- [ "$(facet_fstype ost1)" = "zfs" ] &&
- skip "LU-2059: no local config for ZFS OSTs" && return
-
start_ost
start_mds
wait_osc_import_state mds ost FULL
stop_ost2
stop_mds
#writeconf to remove all ost2 traces for subsequent tests
- writeconf
+ writeconf_or_reformat
}
run_test 21c "start mds between two osts, stop mds last"
stop_mds
stop_mgs
#writeconf to remove all ost2 traces for subsequent tests
- writeconf
+ writeconf_or_reformat
start_mgs
}
run_test 21d "start mgs then ost and then mds"
echo Client mount with ost in logs, but none running
start_ost
# wait until mds connected to ost and open client connection
- wait_osc_import_state mds ost FULL
+ wait_osc_import_state mds ost FULL
stop_ost
mount_client $MOUNT
# check_mount will block trying to contact ost
sleep $((TIMEOUT + TIMEOUT + TIMEOUT))
fi
mount_client $MOUNT
- wait_osc_import_state mds ost FULL
- wait_osc_import_state client ost FULL
+ wait_osc_import_state mds ost FULL
+ wait_osc_import_state client ost FULL
check_mount || return 41
pass
"MOUNT_LUSTRE_PID $MOUNT_LUSTRE_PID still not killed in $WAIT secs"
ps -ef | grep mount
fi
- stop_mds || error
- stop_ost || error
+ stop_mds || error "stopping MDSes failed"
+ stop_ost || error "stopping OSSes failed"
}
run_test 23a "interrupt client during recovery mount delay"
OSTDEV1_2=$fs2ost_DEV
OSTDEV2_2=$fs3ost_DEV
-cleanup_24a() {
+cleanup_fs2() {
trap 0
echo "umount $MOUNT2 ..."
umount $MOUNT2 || true
--reformat $fs2ostdev $fs2ostvdev || exit 10
setup
- start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_24a EXIT INT
+ start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_fs2 EXIT INT
start fs2ost $fs2ostdev $OST_MOUNT_OPTS
mkdir -p $MOUNT2
- mount -t lustre $MGSNID:/${FSNAME2} $MOUNT2 || return 1
+ $MOUNT_CMD $MGSNID:/${FSNAME2} $MOUNT2 || return 1
# 1 still works
check_mount || return 2
# files written on 1 should not show up on 2
stop_mds
MDS=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
[ -z "$MDS" ] && error "No MDT" && return 8
- cleanup_24a
+ cleanup_fs2
cleanup_nocli || return 6
}
run_test 24a "Multiple MDTs on a single node"
run_test 26 "MDT startup failure cleans LOV (should return errs)"
test_27a() {
- [ "$(facet_fstype ost1)" = "zfs" ] &&
- skip "LU-2059: no local config for ZFS OSTs" && return
-
start_ost || return 1
start_mds || return 2
echo "Requeue thread should have started: "
test_27b() {
# FIXME. ~grev
- setup
- local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }')
+ setup
+ local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" |
+ awk '($3 ~ "mdt" && $4 ~ "MDT0000") { print $4 }')
facet_failover $SINGLEMDS
set_conf_param_and_check $SINGLEMDS \
}
run_test 28 "permanent parameter setting"
+test_28a() { # LU-4221
+ [[ $(lustre_version_code ost1) -ge $(version_code 2.5.52) ]] ||
+ { skip "Need OST version at least 2.5.52" && return 0; }
+ [ "$(facet_fstype ost1)" = "zfs" ] &&
+ skip "LU-4221: no such proc params for ZFS OSTs" && return
+
+ local name
+ local param
+ local cmd
+ local old
+ local new
+ local device="$FSNAME-OST0000"
+
+ setup
+
+ # In this test we will set three kinds of proc parameters with
+ # lctl conf_param:
+ # 1. the ones moved from the OFD to the OSD, and only their
+ # symlinks kept in obdfilter
+ # 2. non-symlink ones in the OFD
+ # 3. non-symlink ones in the OSD
+
+ # Check 1.
+ # prepare a symlink parameter in the OFD
+ name="writethrough_cache_enable"
+ param="$device.ost.$name"
+ cmd="$LCTL get_param -n obdfilter.$device.$name"
+
+ # conf_param the symlink parameter in the OFD
+ old=$(do_facet ost1 $cmd)
+ new=$(((old + 1) % 2))
+ set_conf_param_and_check ost1 "$cmd" "$param" $new ||
+ error "lctl conf_param $device.ost.$param=$new failed"
+
+ # conf_param the target parameter in the OSD
+ param="$device.osd.$name"
+ cmd="$LCTL get_param -n osd-*.$device.$name"
+ set_conf_param_and_check ost1 "$cmd" "$param" $old ||
+ error "lctl conf_param $device.osd.$param=$old failed"
+
+ # Check 2.
+ # prepare a non-symlink parameter in the OFD
+ name="client_cache_seconds"
+ param="$device.ost.$name"
+ cmd="$LCTL get_param -n obdfilter.$device.$name"
+
+ # conf_param the parameter in the OFD
+ old=$(do_facet ost1 $cmd)
+ new=$((old * 2))
+ set_conf_param_and_check ost1 "$cmd" "$param" $new ||
+ error "lctl conf_param $device.ost.$param=$new failed"
+ set_conf_param_and_check ost1 "$cmd" "$param" $old ||
+ error "lctl conf_param $device.ost.$param=$old failed"
+
+ # Check 3.
+ # prepare a non-symlink parameter in the OSD
+ name="lma_self_repair"
+ param="$device.osd.$name"
+ cmd="$LCTL get_param -n osd-*.$device.$name"
+
+ # conf_param the parameter in the OSD
+ old=$(do_facet ost1 $cmd)
+ new=$(((old + 1) % 2))
+ set_conf_param_and_check ost1 "$cmd" "$param" $new ||
+ error "lctl conf_param $device.osd.$param=$new failed"
+ set_conf_param_and_check ost1 "$cmd" "$param" $old ||
+ error "lctl conf_param $device.osd.$param=$old failed"
+
+ cleanup
+}
+run_test 28a "set symlink parameters permanently with conf_param"
+
test_29() {
[ "$OSTCOUNT" -lt "2" ] && skip_env "$OSTCOUNT < 2, skipping" && return
setup > /dev/null 2>&1
echo "Live client success: got $RESULT"
fi
- # check MDT too
- local mdtosc=$(get_mdtosc_proc_path $SINGLEMDS $FSNAME-OST0001)
- mdtosc=${mdtosc/-MDT*/-MDT\*}
- local MPROC="osc.$mdtosc.active"
- local MAX=30
- local WAIT=0
- while [ 1 ]; do
- sleep 5
- RESULT=`do_facet $SINGLEMDS " lctl get_param -n $MPROC"`
- [ ${PIPESTATUS[0]} = 0 ] || error "Can't read $MPROC"
- if [ $RESULT -eq $DEAC ]; then
- echo "MDT deactivated also after $WAIT sec (got $RESULT)"
- break
- fi
- WAIT=$((WAIT + 5))
- if [ $WAIT -eq $MAX ]; then
- echo "MDT not deactivated: wanted $DEAC got $RESULT"
- return 4
- fi
- echo "Waiting $(($MAX - $WAIT)) secs for MDT deactivated"
+ # check MDTs too
+ for num in $(seq $MDSCOUNT); do
+ local mdtosc=$(get_mdtosc_proc_path mds${num} $FSNAME-OST0001)
+ local MPROC="osc.$mdtosc.active"
+ local MAX=30
+ local WAIT=0
+ while [ 1 ]; do
+ sleep 5
+ RESULT=$(do_facet mds${num} " lctl get_param -n $MPROC")
+ [ ${PIPESTATUS[0]} = 0 ] || error "Can't read $MPROC"
+ if [ $RESULT -eq $DEAC ]; then
+ echo -n "MDT deactivated also after"
+ echo "$WAIT sec (got $RESULT)"
+ break
+ fi
+ WAIT=$((WAIT + 5))
+ if [ $WAIT -eq $MAX ]; then
+ echo -n "MDT not deactivated: wanted $DEAC"
+ echo "got $RESULT"
+ return 4
+ fi
+ echo "Waiting $(($MAX - $WAIT))secs for MDT deactivated"
+ done
done
-
# test new client starts deactivated
umount_client $MOUNT || return 200
mount_client $MOUNT
stop_ost2
cleanup_nocli
#writeconf to remove all ost2 traces for subsequent tests
- writeconf
+ writeconf_or_reformat
}
run_test 29 "permanently remove an OST"
run_test 30b "Remove failover nids"
test_31() { # bug 10734
- # ipaddr must not exist
- mount -t lustre 4.3.2.1@tcp:/lustre $MOUNT || true
+ # ipaddr must not exist
+ $MOUNT_CMD 4.3.2.1@tcp:/lustre $MOUNT || true
cleanup
}
run_test 31 "Connect to non-existent node (shouldn't crash)"
+
+T32_QID=60000
+T32_BLIMIT=20480 # Kbytes
+T32_ILIMIT=2
+
#
# This is not really a test but a tool to create new disk
# image tarballs for the upgrade tests.
mkdir $tmp/src
tar cf - -C $src . | tar xf - -C $tmp/src
+ dd if=/dev/zero of=$tmp/src/t32_qf_old bs=1M \
+ count=$(($T32_BLIMIT / 1024 / 2))
+ chown $T32_QID.$T32_QID $tmp/src/t32_qf_old
- formatall
+ # format ost with comma-separated NIDs to verify LU-4460
+ local failnid="$(h2$NETTYPE 1.2.3.4),$(h2$NETTYPE 4.3.2.1)"
+ MGSNID="$MGSNID,$MGSNID" OSTOPT="--failnode=$failnid" formatall
setupall
+
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.50) ] &&
+ $LFS quotacheck -ug /mnt/$FSNAME
+ $LFS setquota -u $T32_QID -b 0 -B $T32_BLIMIT -i 0 -I $T32_ILIMIT \
+ /mnt/$FSNAME
+
tar cf - -C $tmp/src . | tar xf - -C /mnt/$FSNAME
stopall
popd
$LCTL get_param -n version | head -n 1 |
sed -e 's/^lustre: *//' >$tmp/img/commit
+
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.50) ] &&
+ $LFS quotaon -ug /mnt/$FSNAME
+ $LFS quota -u $T32_QID -v /mnt/$FSNAME
+ $LFS quota -v -u $T32_QID /mnt/$FSNAME |
+ awk 'BEGIN { num='1' } { if ($1 == "'/mnt/$FSNAME'") \
+ { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
+ | tr -d "*" > $tmp/img/bspace
+ $LFS quota -v -u $T32_QID /mnt/$FSNAME |
+ awk 'BEGIN { num='5' } { if ($1 == "'/mnt/$FSNAME'") \
+ { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
+ | tr -d "*" > $tmp/img/ispace
+
stopall
pushd $tmp/src
exit 0
fi
- if [ -n "$($LCTL list_nids | grep -v '\(tcp\|lo\)[[:digit:]]*$')" ]; then
- skip "LU-2200: Test cannot run over Infiniband"
- exit 0
- fi
-
local IMGTYPE=$(facet_fstype $SINGLEMDS)
tarballs=$($r find $RLUSTRE/tests -maxdepth 1 -name \'disk*-$IMGTYPE.tar.bz2\')
}
t32_test_cleanup() {
- local node=$(facet_active_host $SINGLEMDS)
- local r="do_node $node"
local tmp=$TMP/t32
+ local fstype=$(facet_fstype $SINGLEMDS)
local rc=$?
if $shall_cleanup_lustre; then
if $shall_cleanup_mdt; then
$r umount -d $tmp/mnt/mdt || rc=$?
fi
+ if $shall_cleanup_mdt1; then
+ $r umount -d $tmp/mnt/mdt1 || rc=$?
+ fi
if $shall_cleanup_ost; then
$r umount -d $tmp/mnt/ost || rc=$?
fi
- $r rm -rf $tmp || rc=$?
- rm -rf $tmp || rc=$?
+
+ $r rm -rf $tmp
+ rm -rf $tmp
+ if [ $fstype == "zfs" ]; then
+ $r $ZPOOL destroy t32fs-mdt1 || rc=$?
+ $r $ZPOOL destroy t32fs-ost1 || rc=$?
+ fi
return $rc
}
all_removed=true
do_rpc_nodes $node check_mem_leak || return 1
if $all_removed; then
- load_modules
+ do_rpc_nodes $node load_modules
return 0
fi
sleep 5
t32_wait_til_devices_gone() {
local node=$1
local devices
+ local loops
local i=0
echo wait for devices to go
while ((i < 20)); do
devices=$(do_rpc_nodes $node $LCTL device_list | wc -l)
- echo $device
- ((devices == 0)) && return 1
+ loops=$(do_rpc_nodes $node losetup -a | grep -c t32)
+ ((devices == 0 && loops == 0)) && return 0
sleep 5
i=$((i + 1))
done
- echo "waiting for devices on $node: Given up"
+ echo "waiting for dev on $node: dev $devices loop $loops given up"
+ do_rpc_nodes $node "losetup -a"
+ do_rpc_nodes $node "$LCTL devices_list"
return 1
}
+t32_verify_quota() {
+ local node=$1
+ local fsname=$2
+ local mnt=$3
+ local fstype=$(facet_fstype $SINGLEMDS)
+ local qval
+ local cmd
+
+ $LFS quota -u $T32_QID -v $mnt
+
+ qval=$($LFS quota -v -u $T32_QID $mnt |
+ awk 'BEGIN { num='1' } { if ($1 == "'$mnt'") \
+ { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
+ | tr -d "*")
+ [ $qval -eq $img_bspace ] || {
+ echo "bspace, act:$qval, exp:$img_bspace"
+ return 1
+ }
+
+ qval=$($LFS quota -v -u $T32_QID $mnt |
+ awk 'BEGIN { num='5' } { if ($1 == "'$mnt'") \
+ { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
+ | tr -d "*")
+ [ $qval -eq $img_ispace ] || {
+ echo "ispace, act:$qval, exp:$img_ispace"
+ return 1
+ }
+
+ qval=$($LFS quota -v -u $T32_QID $mnt |
+ awk 'BEGIN { num='3' } { if ($1 == "'$mnt'") \
+ { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
+ | tr -d "*")
+ [ $qval -eq $T32_BLIMIT ] || {
+ echo "blimit, act:$qval, exp:$T32_BLIMIT"
+ return 1
+ }
+
+ qval=$($LFS quota -v -u $T32_QID $mnt |
+ awk 'BEGIN { num='7' } { if ($1 == "'$mnt'") \
+ { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
+ | tr -d "*")
+ [ $qval -eq $T32_ILIMIT ] || {
+ echo "ilimit, act:$qval, exp:$T32_ILIMIT"
+ return 1
+ }
+
+ do_node $node $LCTL conf_param $fsname.quota.mdt=ug
+ cmd="$LCTL get_param -n osd-$fstype.$fsname-MDT0000"
+ cmd=$cmd.quota_slave.enabled
+ wait_update $node "$cmd" "ug" || {
+ echo "Enable mdt quota failed"
+ return 1
+ }
+
+ do_node $node $LCTL conf_param $fsname.quota.ost=ug
+ cmd="$LCTL get_param -n osd-$fstype.$fsname-OST0000"
+ cmd=$cmd.quota_slave.enabled
+ wait_update $node "$cmd" "ug" || {
+ echo "Enable ost quota failed"
+ return 1
+ }
+
+ chmod 0777 $mnt
+ runas -u $T32_QID -g $T32_QID dd if=/dev/zero of=$mnt/t32_qf_new \
+ bs=1M count=$(($T32_BLIMIT / 1024)) oflag=sync && {
+ echo "Write succeed, but expect -EDQUOT"
+ return 1
+ }
+ rm -f $mnt/t32_qf_new
+
+ runas -u $T32_QID -g $T32_QID createmany -m $mnt/t32_qf_ \
+ $T32_ILIMIT && {
+ echo "Create succeed, but expect -EDQUOT"
+ return 1
+ }
+ unlinkmany $mnt/t32_qf_ $T32_ILIMIT
+
+ return 0
+}
+
t32_test() {
local tarball=$1
local writeconf=$2
+ local dne_upgrade=${dne_upgrade:-"no"}
+ local ff_convert=${ff_convert:-"no"}
local shall_cleanup_mdt=false
+ local shall_cleanup_mdt1=false
local shall_cleanup_ost=false
local shall_cleanup_lustre=false
local node=$(facet_active_host $SINGLEMDS)
local r="do_node $node"
+ local node2=$(facet_active_host mds2)
local tmp=$TMP/t32
local img_commit
local img_kernel
local img_arch
+ local img_bspace
+ local img_ispace
local fsname=t32fs
local nid=$($r $LCTL list_nids | head -1)
local mopts
local nrpcs_orig
local nrpcs
local list
+ local fstype=$(facet_fstype $SINGLEMDS)
+ local mdt_dev=$tmp/mdt
+ local ost_dev=$tmp/ost
trap 'trap - RETURN; t32_test_cleanup' RETURN
img_commit=$($r cat $tmp/commit)
img_kernel=$($r cat $tmp/kernel)
img_arch=$($r cat $tmp/arch)
+ img_bspace=$($r cat $tmp/bspace)
+ img_ispace=$($r cat $tmp/ispace)
echo "Upgrading from $(basename $tarball), created with:"
echo " Commit: $img_commit"
echo " Kernel: $img_kernel"
echo " Arch: $img_arch"
+ local version=$(version_code $img_commit)
+ [[ $version -ge $(version_code 2.5.0) ]] && ff_convert="no"
+
+ if [ $fstype == "zfs" ]; then
+ # import pool first
+ $r $ZPOOL import -f -d $tmp t32fs-mdt1
+ $r $ZPOOL import -f -d $tmp t32fs-ost1
+ mdt_dev=t32fs-mdt1/mdt1
+ ost_dev=t32fs-ost1/ost1
+ wait_update_facet $SINGLEMDS "$ZPOOL list |
+ awk '/^t32fs-mdt1/ { print \\\$1 }'" "t32fs-mdt1" || {
+ error_noexit "import zfs pool failed"
+ return 1
+ }
+ fi
+
$r $LCTL set_param debug="$PTLDEBUG"
- $r $TUNEFS --dryrun $tmp/mdt || {
+ $r $TUNEFS --dryrun $mdt_dev || {
+ $r losetup -a
error_noexit "tunefs.lustre before mounting the MDT"
return 1
}
if [ "$writeconf" ]; then
- mopts=loop,writeconf
+ mopts=writeconf
+ if [ $fstype == "ldiskfs" ]; then
+ mopts="loop,$mopts"
+ $r $TUNEFS --quota $mdt_dev || {
+ $r losetup -a
+ error_noexit "Enable mdt quota feature"
+ return 1
+ }
+ fi
else
- mopts=loop,exclude=$fsname-OST0000
+ if [ -n "$($LCTL list_nids | grep -v '\(tcp\|lo\)[[:digit:]]*$')" ]; then
+ [[ $(lustre_version_code mgs) -ge $(version_code 2.3.59) ]] ||
+ { skip "LU-2200: Cannot run over Inifiniband w/o lctl replace_nids "
+ "(Need MGS version at least 2.3.59)"; return 0; }
+
+ local osthost=$(facet_active_host ost1)
+ local ostnid=$(do_node $osthost $LCTL list_nids | head -1)
+
+ mopts=nosvc
+ if [ $fstype == "ldiskfs" ]; then
+ mopts="loop,$mopts"
+ fi
+ $r $MOUNT_CMD -o $mopts $mdt_dev $tmp/mnt/mdt
+ $r lctl replace_nids $fsname-OST0000 $ostnid
+ $r lctl replace_nids $fsname-MDT0000 $nid
+ $r umount -d $tmp/mnt/mdt
+ fi
+
+ mopts=exclude=$fsname-OST0000
+ if [ $fstype == "ldiskfs" ]; then
+ mopts="loop,$mopts"
+ fi
fi
t32_wait_til_devices_gone $node
- $r mount -t lustre -o $mopts $tmp/mdt $tmp/mnt/mdt || {
+ $r $MOUNT_CMD -o $mopts $mdt_dev $tmp/mnt/mdt || {
+ $r losetup -a
error_noexit "Mounting the MDT"
return 1
}
shall_cleanup_mdt=true
+ if [ "$dne_upgrade" != "no" ]; then
+ local fs2mdsdev=$(mdsdevname 1_2)
+ local fs2mdsvdev=$(mdsvdevname 1_2)
+
+ echo "mkfs new MDT on ${fs2mdsdev}...."
+ if [ $(facet_fstype mds1) == ldiskfs ]; then
+ mkfsoptions="--mkfsoptions=\\\"-J size=8\\\""
+ fi
+
+ add fs2mds $(mkfs_opts mds2 $fs2mdsdev $fsname) --reformat \
+ $mkfsoptions $fs2mdsdev $fs2mdsvdev > /dev/null || {
+ error_noexit "Mkfs new MDT failed"
+ return 1
+ }
+
+ $r $TUNEFS --dryrun $fs2mdsdev || {
+ error_noexit "tunefs.lustre before mounting the MDT"
+ return 1
+ }
+
+ echo "mount new MDT....$fs2mdsdev"
+ $r mkdir -p $tmp/mnt/mdt1
+ $r $MOUNT_CMD -o $mopts $fs2mdsdev $tmp/mnt/mdt1 || {
+ error_noexit "mount mdt1 failed"
+ return 1
+ }
+
+ $r $LCTL set_param -n mdt.${fsname}*.enable_remote_dir=1 ||
+ error_noexit "enable remote dir create failed"
+
+ shall_cleanup_mdt1=true
+ fi
+
uuid=$($r $LCTL get_param -n mdt.$fsname-MDT0000.uuid) || {
error_noexit "Getting MDT UUID"
return 1
return 1
fi
- $r $TUNEFS --dryrun $tmp/ost || {
+ $r $TUNEFS --dryrun $ost_dev || {
error_noexit "tunefs.lustre before mounting the OST"
return 1
}
if [ "$writeconf" ]; then
- mopts=loop,mgsnode=$nid,$writeconf
+ mopts=mgsnode=$nid,$writeconf
+ if [ $fstype == "ldiskfs" ]; then
+ mopts="loop,$mopts"
+ $r $TUNEFS --quota $ost_dev || {
+ $r losetup -a
+ error_noexit "Enable ost quota feature"
+ return 1
+ }
+ fi
else
- mopts=loop,mgsnode=$nid
+ mopts=mgsnode=$nid
+ if [ $fstype == "ldiskfs" ]; then
+ mopts="loop,$mopts"
+ fi
fi
- $r mount -t lustre -o $mopts $tmp/ost $tmp/mnt/ost || {
+ $r $MOUNT_CMD -o $mopts $ost_dev $tmp/mnt/ost || {
error_noexit "Mounting the OST"
return 1
}
return 1
}
+ if [ "$ff_convert" != "no" -a $(facet_fstype ost1) == "ldiskfs" ]; then
+ $r $LCTL lfsck_start -M $fsname-OST0000 || {
+ error_noexit "Start OI scrub on OST0"
+ return 1
+ }
+
+ # The oi_scrub should be on ost1, but for test_32(),
+ # all on the SINGLEMDS.
+ wait_update_facet $SINGLEMDS "$LCTL get_param -n \
+ osd-ldiskfs.$fsname-OST0000.oi_scrub |
+ awk '/^status/ { print \\\$2 }'" "completed" 30 || {
+ error_noexit "Failed to get the expected 'completed'"
+ return 1
+ }
+
+ local UPDATED=$($r $LCTL get_param -n \
+ osd-ldiskfs.$fsname-OST0000.oi_scrub |
+ awk '/^updated/ { print $2 }')
+ [ $UPDATED -ge 1 ] || {
+ error_noexit "Only $UPDATED objects have been converted"
+ return 1
+ }
+ fi
+
+ if [ "$dne_upgrade" != "no" ]; then
+ $r $LCTL conf_param \
+ $fsname-MDT0001.mdc.max_rpcs_in_flight=9 || {
+ error_noexit "Setting MDT1 \"max_rpcs_in_flight\""
+ return 1
+ }
+ $r $LCTL conf_param $fsname-MDT0001.failover.node=$nid || {
+ error_noexit "Setting MDT1 \"failover.node\""
+ return 1
+ }
+ $r $LCTL conf_param $fsname-MDT0001.lov.stripesize=4M || {
+ error_noexit "Setting MDT1 \"lov.stripesize\""
+ return 1
+ }
+
+ fi
+
if [ "$writeconf" ]; then
- mount -t lustre $nid:/$fsname $tmp/mnt/lustre || {
+ $MOUNT_CMD $nid:/$fsname $tmp/mnt/lustre || {
error_noexit "Mounting the client"
return 1
}
shall_cleanup_lustre=true
$LCTL set_param debug="$PTLDEBUG"
+ t32_verify_quota $node $fsname $tmp/mnt/lustre || {
+ error_noexit "verify quota failed"
+ return 1
+ }
+
+ if [ "$dne_upgrade" != "no" ]; then
+ $LFS mkdir -i 1 $tmp/mnt/lustre/remote_dir || {
+ error_noexit "set remote dir failed"
+ return 1
+ }
+
+ pushd $tmp/mnt/lustre
+ tar -cf - . --exclude=./remote_dir |
+ tar -xvf - -C remote_dir 1>/dev/null || {
+ error_noexit "cp to remote dir failed"
+ return 1
+ }
+ popd
+ fi
+
+ dd if=/dev/zero of=$tmp/mnt/lustre/tmp_file bs=10k count=10 || {
+ error_noexit "dd failed"
+ return 1
+ }
+ rm -rf $tmp/mnt/lustre/tmp_file || {
+ error_noexit "rm failed"
+ return 1
+ }
+
if $r test -f $tmp/sha1sums; then
# LU-2393 - do both sorts on same node to ensure locale
# is identical
$r cat $tmp/sha1sums | sort -k 2 >$tmp/sha1sums.orig
- pushd $tmp/mnt/lustre
+ if [ "$dne_upgrade" != "no" ]; then
+ pushd $tmp/mnt/lustre/remote_dir
+ else
+ pushd $tmp/mnt/lustre
+ fi
+
find ! -name .lustre -type f -exec sha1sum {} \; |
sort -k 2 >$tmp/sha1sums || {
error_noexit "sha1sum"
echo "sha1sum verification skipped"
fi
+ if [ "$dne_upgrade" != "no" ]; then
+ rm -rf $tmp/mnt/lustre/remote_dir || {
+ error_noexit "remove remote dir failed"
+ return 1
+ }
+ fi
+
if $r test -f $tmp/list; then
#
# There is not a Test Framework API to copy files to or
# on an architecture with different number of bits per
# "long".
#
- if [ $(t32_bits_per_long $(uname -m)) != \
- $(t32_bits_per_long $img_arch) ]; then
+ if [ $(t32_bits_per_long $(uname -m)) != \
+ $(t32_bits_per_long $img_arch) ]; then
echo "Different number of bits per \"long\" from the disk image"
for list in list.orig list; do
sed -i -e 's/^[0-9]\+[ \t]\+//' $tmp/$list
# regenerate every image for each test addition.
#
- nrpcs_orig=$($LCTL get_param -n mdc.*.max_rpcs_in_flight) || {
+ nrpcs_orig=$($LCTL get_param \
+ -n mdc.*MDT0000*.max_rpcs_in_flight) || {
error_noexit "Getting \"max_rpcs_in_flight\""
return 1
}
error_noexit "Changing \"max_rpcs_in_flight\""
return 1
}
- wait_update $HOSTNAME "$LCTL get_param -n mdc.*.max_rpcs_in_flight" \
- $nrpcs || {
+ wait_update $HOSTNAME "$LCTL get_param \
+ -n mdc.*MDT0000*.max_rpcs_in_flight" $nrpcs || {
error_noexit "Verifying \"max_rpcs_in_flight\""
return 1
}
}
shall_cleanup_lustre=false
else
+ if [ "$dne_upgrade" != "no" ]; then
+ $r umount -d $tmp/mnt/mdt1 || {
+ error_noexit "Unmounting the MDT2"
+ return 1
+ }
+ shall_cleanup_mdt1=false
+ fi
+
$r umount -d $tmp/mnt/mdt || {
error_noexit "Unmounting the MDT"
return 1
}
shall_cleanup_mdt=false
+
$r umount -d $tmp/mnt/ost || {
error_noexit "Unmounting the OST"
return 1
}
# mount a second time to make sure we didnt leave upgrade flag on
- $r $TUNEFS --dryrun $tmp/mdt || {
+ $r $TUNEFS --dryrun $mdt_dev || {
+ $r losetup -a
error_noexit "tunefs.lustre before remounting the MDT"
return 1
}
- $r mount -t lustre -o loop,exclude=$fsname-OST0000 $tmp/mdt \
- $tmp/mnt/mdt || {
+
+ mopts=exclude=$fsname-OST0000
+ if [ $fstype == "ldiskfs" ]; then
+ mopts="loop,$mopts"
+ fi
+ $r $MOUNT_CMD -o $mopts $mdt_dev $tmp/mnt/mdt || {
error_noexit "Remounting the MDT"
return 1
}
t32_check
for tarball in $tarballs; do
- t32_test $tarball || rc=$?
+ t32_test $tarball || let "rc += $?"
done
return $rc
}
t32_check
for tarball in $tarballs; do
- t32_test $tarball writeconf || rc=$?
+ t32_test $tarball writeconf || let "rc += $?"
done
return $rc
}
run_test 32b "Upgrade with writeconf"
+test_32c() {
+ local tarballs
+ local tarball
+ local rc=0
+
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ t32_check
+ for tarball in $tarballs; do
+ dne_upgrade=yes t32_test $tarball writeconf || rc=$?
+ done
+ return $rc
+}
+run_test 32c "dne upgrade test"
+
+test_32d() {
+ local tarballs
+ local tarball
+ local rc=0
+
+ t32_check
+ for tarball in $tarballs; do
+ ff_convert=yes t32_test $tarball || rc=$?
+ done
+ return $rc
+}
+run_test 32d "convert ff test"
+
test_33a() { # bug 12333, was test_33
local rc=0
local FSNAME2=test-123
--fsname=${FSNAME2} --index=8191 --reformat $fs2ostdev \
$fs2ostvdev || exit 10
- start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_24a EXIT INT
+ start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_fs2 EXIT INT
start fs2ost $fs2ostdev $OST_MOUNT_OPTS
do_facet $SINGLEMDS "$LCTL conf_param $FSNAME2.sys.timeout=200" || rc=1
mkdir -p $MOUNT2
- mount -t lustre $MGSNID:/${FSNAME2} $MOUNT2 || rc=2
+ $MOUNT_CMD $MGSNID:/${FSNAME2} $MOUNT2 || rc=2
echo "ok."
cp /etc/hosts $MOUNT2/ || rc=3
log "Set up a fake failnode for the MDS"
FAKENID="127.0.0.2"
- local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
- do_facet mgs "$LCTL conf_param ${device}.failover.node=" \
- "$(h2$NETTYPE $FAKENID)" || return 4
+ local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" |
+ awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
+ do_facet mgs "$LCTL conf_param \
+ ${device}.failover.node=$(h2$NETTYPE $FAKENID)" || return 4
log "Wait for RECONNECT_INTERVAL seconds (10s)"
sleep 10
MSG="conf-sanity.sh test_35a `date +%F%kh%Mm%Ss`"
$LCTL clear
log "$MSG"
- log "Stopping the MDT:"
- stop_mds || return 5
+ log "Stopping the MDT: $device"
+ stop_mdt 1 || return 5
df $MOUNT > /dev/null 2>&1 &
DFPID=$!
- log "Restarting the MDT:"
- start_mds || return 6
+ log "Restarting the MDT: $device"
+ start_mdt 1 || return 6
log "Wait for df ($DFPID) ... "
wait $DFPID
log "done"
[ "$NEXTCONN" != "0" ] && log "The client didn't try to reconnect to the last active server (tried ${NEXTCONN} instead)" && return 7
cleanup
# remove nid settings
- writeconf
+ writeconf_or_reformat
}
run_test 35a "Reconnect to the last active server first"
log "Set up a fake failnode for the MDS"
FAKENID="127.0.0.2"
- local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" | \
- awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
- do_facet mgs "$LCTL conf_param ${device}.failover.node=" \
- "$(h2$NETTYPE $FAKENID)" || return 1
+ local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" |
+ awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
+ do_facet mgs "$LCTL conf_param \
+ ${device}.failover.node=$(h2$NETTYPE $FAKENID)" || return 1
local at_max_saved=0
# adaptive timeouts may prevent seeing the issue
cleanup
# remove nid settings
- writeconf
+ writeconf_or_reformat
}
run_test 35b "Continue reconnection retries, if the active server is busy"
# different one than the default value here.
add fs2ost $(mkfs_opts ost1 ${fs2ostdev}) --mgsnode=$MGSNID \
--fsname=${FSNAME2} --reformat $fs2ostdev $fs2ostvdev || exit 10
- add fs3ost $(mkfs_opts ost1 ${fs3ostdev}) --mgsnode=$MGSNID \
+ add fs3ost $(mkfs_opts ost2 ${fs3ostdev}) --mgsnode=$MGSNID \
--fsname=${FSNAME2} --reformat $fs3ostdev $fs3ostvdev || exit 10
start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS
start fs2ost $fs2ostdev $OST_MOUNT_OPTS
start fs3ost $fs3ostdev $OST_MOUNT_OPTS
mkdir -p $MOUNT2
- mount -t lustre $MGSNID:/${FSNAME2} $MOUNT2 || return 1
+ $MOUNT_CMD $MGSNID:/${FSNAME2} $MOUNT2 || return 1
sleep 5 # until 11778 fixed
run_test 37 "verify set tunables works for symlink device"
test_38() { # bug 14222
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
- skip "Only applicable to ldiskfs-based MDTs"
- return
- fi
+ local fstype=$(facet_fstype $SINGLEMDS)
+ local mntpt=$(facet_mntpt $SINGLEMDS)
setup
# like runtests
- COUNT=10
- SRC="/etc /bin"
- FILES=`find $SRC -type f -mtime +1 | head -n $COUNT`
+ local COUNT=10
+ local SRC="/etc /bin"
+ local FILES=$(find $SRC -type f -mtime +1 | head -n $COUNT)
log "copying $(echo $FILES | wc -w) files to $DIR/$tdir"
mkdir -p $DIR/$tdir
- tar cf - $FILES | tar xf - -C $DIR/$tdir || \
+ tar cf - $FILES | tar xf - -C $DIR/$tdir ||
error "copying $SRC to $DIR/$tdir"
sync
umount_client $MOUNT
+ do_facet $SINGLEMDS "$LCTL get_param osp.*.prealloc_next_id"
stop_mds
- log "rename lov_objid file on MDS"
- rm -f $TMP/lov_objid.orig
+ log "delete lov_objid file on MDS"
- local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
- do_facet $SINGLEMDS "$DEBUGFS -c -R \\\"dump lov_objid $TMP/lov_objid.orig\\\" $MDSDEV"
- do_facet $SINGLEMDS "$DEBUGFS -w -R \\\"rm lov_objid\\\" $MDSDEV"
+ mount_fstype $SINGLEMDS || error "mount MDS failed (1)"
+
+ do_facet $SINGLEMDS "od -Ax -td8 $mntpt/lov_objid; rm $mntpt/lov_objid"
+
+ unmount_fstype $SINGLEMDS || error "umount failed (1)"
- do_facet $SINGLEMDS "od -Ax -td8 $TMP/lov_objid.orig"
# check create in mds_lov_connect
start_mds
mount_client $MOUNT
[ $V ] && log "verifying $DIR/$tdir/$f"
diff -q $f $DIR/$tdir/$f || ERROR=y
done
- do_facet $SINGLEMDS "$DEBUGFS -c -R \\\"dump lov_objid $TMP/lov_objid.new\\\" $MDSDEV"
- do_facet $SINGLEMDS "od -Ax -td8 $TMP/lov_objid.new"
- [ "$ERROR" = "y" ] && error "old and new files are different after connect" || true
+ do_facet $SINGLEMDS "$LCTL get_param osp.*.prealloc_next_id"
+ if [ "$ERROR" = "y" ]; then
+ # check it's updates in sync
+ umount_client $MOUNT
+ stop_mds
+ mount_fstype $SIGNLEMDS
+ do_facet $SINGLEMDS "od -Ax -td8 $mntpt/lov_objid"
+ unmount_fstype $SINGLEMDS
+ error "old and new files are different after connect" || true
+ fi
+ touch $DIR/$tdir/f2 || error "f2 file create failed"
# check it's updates in sync
umount_client $MOUNT
stop_mds
- do_facet $SINGLEMDS dd if=/dev/zero of=$TMP/lov_objid.clear bs=4096 count=1
- do_facet $SINGLEMDS "$DEBUGFS -w -R \\\"rm lov_objid\\\" $MDSDEV"
- do_facet $SINGLEMDS "$DEBUGFS -w -R \\\"write $TMP/lov_objid.clear lov_objid\\\" $MDSDEV "
+ mount_fstype $SINGLEMDS || error "mount MDS failed (3)"
+
+ do_facet $SINGLEMDS "od -Ax -td8 $mntpt/lov_objid"
+ do_facet $SINGLEMDS dd if=/dev/zero of=$mntpt/lov_objid.clear count=8
+
+ unmount_fstype $SINGLEMDS || error "umount failed (3)"
start_mds
mount_client $MOUNT
[ $V ] && log "verifying $DIR/$tdir/$f"
diff -q $f $DIR/$tdir/$f || ERROR=y
done
- do_facet $SINGLEMDS "$DEBUGFS -c -R \\\"dump lov_objid $TMP/lov_objid.new1\\\" $MDSDEV"
- do_facet $SINGLEMDS "od -Ax -td8 $TMP/lov_objid.new1"
+ touch $DIR/$tdir/f3 || error "f3 file create failed"
+ do_facet $SINGLEMDS "$LCTL get_param osp.*.prealloc_next_id"
umount_client $MOUNT
stop_mds
- [ "$ERROR" = "y" ] && error "old and new files are different after sync" || true
+ mount_fstype $SINGLEMDS || error "mount MDS failed (4)"
+ do_facet $SINGLEMDS "od -Ax -td8 $mntpt/lov_objid"
+ unmount_fstype $SINGLEMDS || error "umount failed (4)"
+
+ [ "$ERROR" = "y" ] &&
+ error "old and new files are different after sync" || true
log "files compared the same"
cleanup
run_test 41b "mount mds with --nosvc and --nomgs on first mount"
test_42() { #bug 14693
- setup
- check_mount || return 2
- do_facet mgs $LCTL conf_param lustre.llite.some_wrong_param=10
- umount_client $MOUNT
- mount_client $MOUNT || return 1
- cleanup
- return 0
-}
-run_test 42 "invalid config param should not prevent client from mounting"
+ setup
+ check_mount || error "client was not mounted"
+
+ do_facet mgs $LCTL conf_param $FSNAME.llite.some_wrong_param=10
+ umount_client $MOUNT ||
+ error "unmounting client failed with invalid llite param"
+ mount_client $MOUNT ||
+ error "mounting client failed with invalid llite param"
+
+ do_facet mgs $LCTL conf_param $FSNAME.sys.some_wrong_param=20
+ cleanup || error "stopping $FSNAME failed with invalid sys param"
+ load_modules
+ setup
+ check_mount || "client was not mounted with invalid sys param"
+ cleanup || error "stopping $FSNAME failed with invalid sys param"
+ return 0
+}
+run_test 42 "allow client/server mount/unmount with invalid config param"
test_43() {
[ $UID -ne 0 -o $RUNAS_ID -eq 0 ] && skip_env "run as root"
+
+ ID1=${ID1:-501}
+ USER1=$(cat /etc/passwd | grep :$ID1:$ID1: | cut -d: -f1)
+ [ -z "$USER1" ] && skip_env "missing user with uid=$ID1 gid=$ID1" &&
+ return
+
setup
chmod ugo+x $DIR || error "chmod 0 failed"
set_conf_param_and_check mds \
"lctl get_param -n mdt.$FSNAME-MDT0000.root_squash" \
"$FSNAME.mdt.root_squash" \
"0:0"
+ wait_update $HOSTNAME \
+ "lctl get_param -n llite.${FSNAME}*.root_squash" \
+ "0:0" ||
+ error "check llite root_squash failed!"
set_conf_param_and_check mds \
"lctl get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
"$FSNAME.mdt.nosquash_nids" \
"NONE"
+ wait_update $HOSTNAME \
+ "lctl get_param -n llite.${FSNAME}*.nosquash_nids" \
+ "NONE" ||
+ error "check llite nosquash_nids failed!"
#
# create set of test files
chmod go-rwx $DIR/$tdir-rootdir || error "chmod 3 failed"
touch $DIR/$tdir-rootdir/tfile-1 || error "touch failed"
+ echo "777" > $DIR/$tfile-user1file || error "write 7 failed"
+ chmod go-rw $DIR/$tfile-user1file || error "chmod 7 failed"
+ chown $ID1.$ID1 $DIR/$tfile-user1file || error "chown failed"
+
#
# check root_squash:
# set root squash UID:GID to RUNAS_ID
"lctl get_param -n mdt.$FSNAME-MDT0000.root_squash" \
"$FSNAME.mdt.root_squash" \
"$RUNAS_ID:$RUNAS_ID"
+ wait_update $HOSTNAME \
+ "lctl get_param -n llite.${FSNAME}*.root_squash" \
+ "$RUNAS_ID:$RUNAS_ID" ||
+ error "check llite root_squash failed!"
ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-userfile)
dd if=$DIR/$tfile-userfile 1>/dev/null 2>/dev/null || \
echo "$ST: root read permission is granted - ok"
echo "444" | \
- dd conv=notrunc if=$DIR/$tfile-userfile 1>/dev/null 2>/dev/null || \
+ dd conv=notrunc of=$DIR/$tfile-userfile 1>/dev/null 2>/dev/null || \
error "$ST: root write permission is denied"
echo "$ST: root write permission is granted - ok"
error "$ST: root create permission is granted"
echo "$ST: root create permission is denied - ok"
+
+ # LU-1778
+ # check root_squash is enforced independently
+ # of client cache content
+ #
+ # access file by USER1, keep access open
+ # root should be denied access to user file
+
+ runas -u $ID1 tail -f $DIR/$tfile-user1file 1>/dev/null 2>&1 &
+ pid=$!
+ sleep 1
+
+ ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-user1file)
+ dd if=$DIR/$tfile-user1file 1>/dev/null 2>&1 &&
+ { kill $pid; error "$ST: root read permission is granted"; }
+ echo "$ST: root read permission is denied - ok"
+
+ echo "777" | \
+ dd conv=notrunc of=$DIR/$tfile-user1file 1>/dev/null 2>&1 &&
+ { kill $pid; error "$ST: root write permission is granted"; }
+ echo "$ST: root write permission is denied - ok"
+
+ kill $pid
+ wait $pid
+
#
# check nosquash_nids:
# put client's NID into nosquash_nids list,
"lctl get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
"$FSNAME-MDTall.mdt.nosquash_nids" \
"$NIDLIST"
+ wait_update $HOSTNAME \
+ "lctl get_param -n llite.${FSNAME}*.nosquash_nids" \
+ "$NIDLIST" ||
+ error "check llite nosquash_nids failed!"
ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-rootfile)
dd if=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null || \
stop_mds || rc=$?
cleanup_nocli || rc=$?
#writeconf to remove all ost2 traces for subsequent tests
- writeconf
+ writeconf_or_reformat
return $rc
}
run_test 48 "too many acls on file"
# check PARAM_SYS_LDLM_TIMEOUT option of MKFS.LUSTRE
-test_49() { # bug 17710
+test_49a() { # bug 17710
local timeout_orig=$TIMEOUT
local ldlm_timeout_orig=$LDLM_TIMEOUT
local LOCAL_TIMEOUT=20
reformat
setup_noconfig
- check_mount || return 1
+ check_mount || error "client mount failed"
echo "check ldlm_timout..."
- LDLM_MDS="`do_facet $SINGLEMDS lctl get_param -n ldlm_timeout`"
- LDLM_OST1="`do_facet ost1 lctl get_param -n ldlm_timeout`"
- LDLM_CLIENT="`do_facet client lctl get_param -n ldlm_timeout`"
+ local LDLM_MDS="$(do_facet $SINGLEMDS lctl get_param -n ldlm_timeout)"
+ local LDLM_OST1="$(do_facet ost1 lctl get_param -n ldlm_timeout)"
+ local LDLM_CLIENT="$(do_facet client lctl get_param -n ldlm_timeout)"
- if [ $LDLM_MDS -ne $LDLM_OST1 ] || [ $LDLM_MDS -ne $LDLM_CLIENT ]; then
+ if [ $LDLM_MDS -ne $LDLM_OST1 -o $LDLM_MDS -ne $LDLM_CLIENT ]; then
error "Different LDLM_TIMEOUT:$LDLM_MDS $LDLM_OST1 $LDLM_CLIENT"
fi
if [ $LDLM_MDS -ne $((LOCAL_TIMEOUT / 3)) ]; then
- error "LDLM_TIMEOUT($LDLM_MDS) is not correct"
+ error "LDLM_TIMEOUT($LDLM_MDS) is not $((LOCAL_TIMEOUT / 3))"
fi
umount_client $MOUNT
- stop_ost || return 2
- stop_mds || return 3
+ stop_ost || error "problem stopping OSS"
+ stop_mds || error "problem stopping MDS"
+
+ LDLM_TIMEOUT=$ldlm_timeout_orig
+ TIMEOUT=$timeout_orig
+}
+run_test 49a "check PARAM_SYS_LDLM_TIMEOUT option of mkfs.lustre"
+
+test_49b() { # bug 17710
+ local timeout_orig=$TIMEOUT
+ local ldlm_timeout_orig=$LDLM_TIMEOUT
+ local LOCAL_TIMEOUT=20
LDLM_TIMEOUT=$((LOCAL_TIMEOUT - 1))
+ TIMEOUT=$LOCAL_TIMEOUT
reformat
setup_noconfig
- check_mount || return 7
+ check_mount || error "client mount failed"
- LDLM_MDS="`do_facet $SINGLEMDS lctl get_param -n ldlm_timeout`"
- LDLM_OST1="`do_facet ost1 lctl get_param -n ldlm_timeout`"
- LDLM_CLIENT="`do_facet client lctl get_param -n ldlm_timeout`"
+ local LDLM_MDS="$(do_facet $SINGLEMDS lctl get_param -n ldlm_timeout)"
+ local LDLM_OST1="$(do_facet ost1 lctl get_param -n ldlm_timeout)"
+ local LDLM_CLIENT="$(do_facet client lctl get_param -n ldlm_timeout)"
- if [ $LDLM_MDS -ne $LDLM_OST1 ] || [ $LDLM_MDS -ne $LDLM_CLIENT ]; then
+ if [ $LDLM_MDS -ne $LDLM_OST1 -o $LDLM_MDS -ne $LDLM_CLIENT ]; then
error "Different LDLM_TIMEOUT:$LDLM_MDS $LDLM_OST1 $LDLM_CLIENT"
fi
if [ $LDLM_MDS -ne $((LOCAL_TIMEOUT - 1)) ]; then
- error "LDLM_TIMEOUT($LDLM_MDS) is not correct"
+ error "LDLM_TIMEOUT($LDLM_MDS) is not $((LOCAL_TIMEOUT - 1))"
fi
- cleanup || return $?
+ cleanup || error "cleanup failed"
LDLM_TIMEOUT=$ldlm_timeout_orig
TIMEOUT=$timeout_orig
}
-run_test 49 "check PARAM_SYS_LDLM_TIMEOUT option of MKFS.LUSTRE"
+run_test 49b "check PARAM_SYS_LDLM_TIMEOUT option of mkfs.lustre"
lazystatfs() {
# Test both statfs and lfs df and fail if either one fails
stop_ost2 || error "Unable to stop OST2"
stop_mds || error "Unable to stop MDS"
#writeconf to remove all ost2 traces for subsequent tests
- writeconf
+ writeconf_or_reformat
}
run_test 50c "lazystatfs one server down =========================="
stop_ost2 || error "Unable to stop OST2"
stop_mds || error "Unable to stop MDS"
#writeconf to remove all ost2 traces for subsequent tests
- writeconf
+ writeconf_or_reformat
}
run_test 50d "lazystatfs client/server conn race =========================="
stop_ost || error "Unable to stop OST1"
stop_mds || error "Unable to stop MDS"
#writeconf to remove all ost2 traces for subsequent tests
- writeconf
+ writeconf_or_reformat
}
run_test 50f "normal statfs one server in down =========================="
stop_ost || error "Unable to stop OST1"
stop_mds || error "Unable to stop MDS"
#writeconf to remove all ost2 traces for subsequent tests
- writeconf
+ writeconf_or_reformat
}
run_test 50g "deactivated OST should not cause panic====================="
+# LU-642
+test_50h() {
+ # prepare MDT/OST, make OSC inactive for OST1
+ [ "$OSTCOUNT" -lt "2" ] && skip_env "$OSTCOUNT < 2, skipping" && return
+
+ [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
+ do_facet ost1 "$TUNEFS --param osc.active=0 `ostdevname 1`" ||
+ error "tunefs OST1 failed"
+ start_mds || error "Unable to start MDT"
+ start_ost || error "Unable to start OST1"
+ start_ost2 || error "Unable to start OST2"
+ mount_client $MOUNT || error "client start failed"
+
+ mkdir -p $DIR/$tdir
+
+ # activatate OSC for OST1
+ local TEST="$LCTL get_param -n osc.${FSNAME}-OST0000-osc-[!M]*.active"
+ set_conf_param_and_check client \
+ "$TEST" "${FSNAME}-OST0000.osc.active" 1 ||
+ error "Unable to activate OST1"
+
+ mkdir -p $DIR/$tdir/2
+ $LFS setstripe -c -1 -i 0 $DIR/$tdir/2
+ sleep 1 && echo "create a file after OST1 is activated"
+ # create some file
+ createmany -o $DIR/$tdir/2/$tfile-%d 1
+
+ # check OSC import is working
+ stat $DIR/$tdir/2/* >/dev/null 2>&1 ||
+ error "some OSC imports are still not connected"
+
+ # cleanup
+ umount_client $MOUNT || error "Unable to umount client"
+ stop_ost2 || error "Unable to stop OST2"
+ cleanup_nocli
+}
+run_test 50h "LU-642: activate deactivated OST ==="
+
test_51() {
local LOCAL_TIMEOUT=20
stop_ost2 || return 3
cleanup
#writeconf to remove all ost2 traces for subsequent tests
- writeconf
+ writeconf_or_reformat
}
run_test 51 "Verify that mdt_reint handles RMF_MDT_MD correctly when an OST is added"
# backup objects
echo backup objects to $ost1tmp/objects
- local objects=$(do_node $ost1node 'find '$ost1mnt'/O/0 -type f -size +0'\
- '-newer '$ost1tmp'/modified_first -regex ".*\/[0-9]+"')
- copy_files_xattrs $ost1node $ost1tmp/objects $ost1tmp/object_xattrs $objects
+ local objects=$(do_node $ost1node 'find '$ost1mnt'/O/[0-9]* -type f'\
+ '-size +0 -newer '$ost1tmp'/modified_first -regex ".*\/[0-9]+"')
+ copy_files_xattrs $ost1node $ost1tmp/objects $ost1tmp/object_xattrs \
+ $objects
[ $? -eq 0 ] || { error "Unable to copy objects"; return 13; }
# move objects to lost+found
do_node $ost1node 'mv '$objects' '${ost1mnt}'/lost+found'
[ $? -eq 0 ] || { error "Unable to move objects"; return 14; }
+ # recover objects dry-run
+ echo "ll_recover_lost_found_objs dry_run"
+ do_node $ost1node "ll_recover_lost_found_objs -n -d $ost1mnt/O"
+ [ $? -eq 0 ] || { error "ll_recover_lost_found_objs failed"; return 15; }
+
# recover objects
+ echo "ll_recover_lost_found_objs fix run"
do_node $ost1node "ll_recover_lost_found_objs -d $ost1mnt/lost+found"
[ $? -eq 0 ] || { error "ll_recover_lost_found_objs failed"; return 15; }
local nthrs
shift 4
- setup
check_mount || return 41
# We need to expand $parampat, but it may match multiple parameters, so
tmin=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min")
tmax=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max")
tstarted=$(do_facet $facet "lctl get_param -n ${paramp}.threads_started")
- lassert 28 "$msg" '(($tstarted == $tmin && $tstarted == $tmax ))' || return $?
+ lassert 28 "$msg" '(($tstarted >= $tmin && $tstarted <= $tmax ))' || return $?
cleanup
load_modules
setup
- cleanup
}
test_53a() {
+ setup
thread_sanity OST ost1 'ost.*.ost' 'oss_num_threads' '16'
+ cleanup
}
run_test 53a "check OSS thread count params"
test_53b() {
- thread_sanity MDT $SINGLEMDS 'mdt.*.*.' 'mdt_num_threads' '16'
+ setup
+ local mds=$(do_facet $SINGLEMDS "lctl get_param -N mds.*.*.threads_max \
+ 2>/dev/null")
+ if [ -z "$mds" ]; then
+ #running this on an old MDT
+ thread_sanity MDT $SINGLEMDS 'mdt.*.*.' 'mdt_num_threads' 16
+ else
+ thread_sanity MDT $SINGLEMDS 'mds.*.*.' 'mds_num_threads' 16
+ fi
+ cleanup
}
-run_test 53b "check MDT thread count params"
+run_test 53b "check MDS thread count params"
test_54a() {
if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
test_57a() { # bug 22656
local NID=$(do_facet ost1 "$LCTL get_param nis" | tail -1 | awk '{print $1}')
- writeconf
+ writeconf_or_reformat
+ [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
do_facet ost1 "$TUNEFS --failnode=$NID `ostdevname 1`" || error "tunefs failed"
start_mgsmds
start_ost && error "OST registration from failnode should fail"
test_57b() {
local NID=$(do_facet ost1 "$LCTL get_param nis" | tail -1 | awk '{print $1}')
- writeconf
+ writeconf_or_reformat
+ [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
do_facet ost1 "$TUNEFS --servicenode=$NID `ostdevname 1`" || error "tunefs failed"
start_mgsmds
start_ost || error "OST registration from servicenode should not fail"
}
test_58() { # bug 22658
- if [ $(facet_fstype mds) != ldiskfs ]; then
- skip "Only applicable to ldiskfs-based MDTs"
- return
- fi
setup_noconfig
mkdir -p $DIR/$tdir
createmany -o $DIR/$tdir/$tfile-%d 100
# make sure that OSTs do not cancel llog cookies before we unmount the MDS
#define OBD_FAIL_OBD_LOG_CANCEL_NET 0x601
- do_facet mds "lctl set_param fail_loc=0x601"
+ do_facet $SINGLEMDS "lctl set_param fail_loc=0x601"
unlinkmany $DIR/$tdir/$tfile-%d 100
- stop mds
- local MNTDIR=$(facet_mntpt mds)
+ stop_mds
+
+ local MNTDIR=$(facet_mntpt $SINGLEMDS)
+ local devname=$(mdsdevname ${SINGLEMDS//mds/})
+
# remove all files from the OBJECTS dir
- do_facet mds "mount -t ldiskfs $MDSDEV $MNTDIR"
- do_facet mds "find $MNTDIR/OBJECTS -type f -delete"
- do_facet mds "umount $MNTDIR"
+ mount_fstype $SINGLEMDS
+
+ do_facet $SINGLEMDS "find $MNTDIR/O/1/d* -type f -delete"
+
+ unmount_fstype $SINGLEMDS
# restart MDS with missing llog files
start_mds
do_facet mds "lctl set_param fail_loc=0"
stop_ost2 >> /dev/null
cleanup_nocli >> /dev/null
#writeconf to remove all ost2 traces for subsequent tests
- writeconf
+ writeconf_or_reformat
}
run_test 59 "writeconf mount option"
echo "$LFS df"
$LFS df --lazy || error "lfs df failed"
cleanup || return $?
+ #writeconf to remove all ost2 traces for subsequent tests
+ writeconf_or_reformat
}
run_test 64 "check lfs df --lazy "
+test_65() { # LU-2237
+ # Currently, the test is only valid for ldiskfs backend
+ [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
+ skip "non-ldiskfs backend" && return
+
+ local devname=$(mdsdevname ${SINGLEMDS//mds/})
+ local brpt=$(facet_mntpt brpt)
+ local opts=""
+
+ if ! do_facet $SINGLEMDS "test -b $devname"; then
+ opts="-o loop"
+ fi
+
+ stop_mds
+ local obj=$(do_facet $SINGLEMDS \
+ "$DEBUGFS -c -R \\\"stat last_rcvd\\\" $devname" |
+ grep Inode)
+ if [ -z "$obj" ]; then
+ # The MDT may be just re-formatted, mount the MDT for the
+ # first time to guarantee the "last_rcvd" file is there.
+ start_mds || error "fail to mount the MDS for the first time"
+ stop_mds
+ fi
+
+ # remove the "last_rcvd" file
+ do_facet $SINGLEMDS "mkdir -p $brpt"
+ do_facet $SINGLEMDS \
+ "mount -t $(facet_fstype $SINGLEMDS) $opts $devname $brpt"
+ do_facet $SINGLEMDS "rm -f ${brpt}/last_rcvd"
+ do_facet $SINGLEMDS "umount -d $brpt"
+
+ # restart MDS, the "last_rcvd" file should be recreated.
+ start_mds || error "fail to restart the MDS"
+ stop_mds
+ obj=$(do_facet $SINGLEMDS \
+ "$DEBUGFS -c -R \\\"stat last_rcvd\\\" $devname" | grep Inode)
+ [ -n "$obj" ] || error "fail to re-create the last_rcvd"
+}
+run_test 65 "re-create the lost last_rcvd file when server mount"
+
+test_66() {
+ [[ $(lustre_version_code mgs) -ge $(version_code 2.3.59) ]] ||
+ { skip "Need MGS version at least 2.3.59"; return 0; }
+
+ setup
+ local OST1_NID=$(do_facet ost1 $LCTL list_nids | head -1)
+ local MDS_NID=$(do_facet $SINGLEMDS $LCTL list_nids | head -1)
+
+ echo "replace_nids should fail if MDS, OSTs and clients are UP"
+ do_facet mgs $LCTL replace_nids $FSNAME-OST0000 $OST1_NID &&
+ error "replace_nids fail"
+
+ umount_client $MOUNT || error "unmounting client failed"
+ echo "replace_nids should fail if MDS and OSTs are UP"
+ do_facet mgs $LCTL replace_nids $FSNAME-OST0000 $OST1_NID &&
+ error "replace_nids fail"
+
+ stop_ost
+ echo "replace_nids should fail if MDS is UP"
+ do_facet mgs $LCTL replace_nids $FSNAME-OST0000 $OST1_NID &&
+ error "replace_nids fail"
+
+ stop_mds || error "stopping mds failed"
+
+ if combined_mgs_mds; then
+ start_mdt 1 "-o nosvc" ||
+ error "starting mds with nosvc option failed"
+ fi
+
+ echo "command should accept two parameters"
+ do_facet mgs $LCTL replace_nids $FSNAME-OST0000 &&
+ error "command should accept two params"
+
+ echo "correct device name should be passed"
+ do_facet mgs $LCTL replace_nids $FSNAME-WRONG0000 $OST1_NID &&
+ error "wrong devname"
+
+ echo "wrong nids list should not destroy the system"
+ do_facet mgs $LCTL replace_nids $FSNAME-OST0000 "wrong nids list" &&
+ error "wrong parse"
+
+ echo "replace OST nid"
+ do_facet mgs $LCTL replace_nids $FSNAME-OST0000 $OST1_NID ||
+ error "replace nids failed"
+
+ echo "command should accept two parameters"
+ do_facet mgs $LCTL replace_nids $FSNAME-MDT0000 &&
+ error "command should accept two params"
+
+ echo "wrong nids list should not destroy the system"
+ do_facet mgs $LCTL replace_nids $FSNAME-MDT0000 "wrong nids list" &&
+ error "wrong parse"
+
+ echo "replace MDS nid"
+ do_facet mgs $LCTL replace_nids $FSNAME-MDT0000 $MDS_NID ||
+ error "replace nids failed"
+
+ if ! combined_mgs_mds ; then
+ stop_mgs
+ else
+ stop_mds
+ fi
+
+ setup_noconfig
+ check_mount || error "error after nid replace"
+ cleanup || error "cleanup failed"
+ reformat
+}
+run_test 66 "replace nids"
+
+test_67() { #LU-2950
+ local legacy="$TMP/legacy_lnet_config"
+ local new="$TMP/new_routes_test"
+ local out="$TMP/config_out_file"
+ local verify="$TMP/conv_verify"
+ local verify_conf="$TMP/conf_verify"
+
+ # Create the legacy file that will be run through the
+ # lustre_routes_conversion script
+ cat <<- LEGACY_LNET_CONFIG > $legacy
+ tcp1 23 192.168.213.1@tcp:1; tcp5 34 193.30.4.3@tcp:4;
+ tcp2 54 10.1.3.2@tcp;
+ tcp3 10.3.4.3@tcp:3;
+ tcp4 10.3.3.4@tcp;
+ LEGACY_LNET_CONFIG
+
+ # Create the verification file to verify the output of
+ # lustre_routes_conversion script against.
+ cat <<- VERIFY_LNET_CONFIG > $verify
+ tcp1: { gateway: 192.168.213.1@tcp, hop: 23, priority: 1 }
+ tcp5: { gateway: 193.30.4.3@tcp, hop: 34, priority: 4 }
+ tcp2: { gateway: 10.1.3.2@tcp, hop: 54 }
+ tcp3: { gateway: 10.3.4.3@tcp, priority: 3 }
+ tcp4: { gateway: 10.3.3.4@tcp }
+ VERIFY_LNET_CONFIG
+
+ # Create the verification file to verify the output of
+ # lustre_routes_config script against
+ cat <<- VERIFY_LNET_CONFIG > $verify_conf
+ lctl --net tcp1 add_route 192.168.213.1@tcp 23 1
+ lctl --net tcp5 add_route 193.30.4.3@tcp 34 4
+ lctl --net tcp2 add_route 10.1.3.2@tcp 54 4
+ lctl --net tcp3 add_route 10.3.4.3@tcp 1 3
+ lctl --net tcp4 add_route 10.3.3.4@tcp 1 3
+ VERIFY_LNET_CONFIG
+
+ lustre_routes_conversion $legacy $new > /dev/null
+ if [ -f $new ]; then
+ # verify the conversion output
+ cmp -s $new $verify > /dev/null
+ if [ $? -eq 1 ]; then
+ error "routes conversion failed"
+ fi
+
+ lustre_routes_config --dry-run --verbose $new > $out
+ # check that the script succeeded
+ cmp -s $out $verify_conf > /dev/null
+ if [ $? -eq 1 ]; then
+ error "routes config failed"
+ fi
+ else
+ error "routes conversion test failed"
+ fi
+ # remove generated files
+ rm -f $new $legacy $verify $verify_conf $out
+}
+run_test 67 "test routes conversion and configuration"
+
+test_68() {
+ local fid
+ local seq
+ local START
+ local END
+
+ [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.4.53) ] ||
+ { skip "Need MDS version at least 2.4.53"; return 0; }
+
+ umount_client $MOUNT || error "umount client failed"
+
+ start_mdt 1 || error "MDT start failed"
+ start_ost
+
+ # START-END - the sequences we'll be reserving
+ START=$(do_facet $SINGLEMDS \
+ lctl get_param -n seq.ctl*.space | awk -F'[[ ]' '{print $2}')
+ END=$((START + (1 << 30)))
+ do_facet $SINGLEMDS \
+ lctl set_param seq.ctl*.fldb="[$START-$END\):0:mdt"
+
+ # reset the sequences MDT0000 has already assigned
+ do_facet $SINGLEMDS \
+ lctl set_param seq.srv*MDT0000.space=clear
+
+ # remount to let the client allocate new sequence
+ mount_client $MOUNT || error "mount client failed"
+
+ touch $DIR/$tfile
+ do_facet $SINGLEMDS \
+ lctl get_param seq.srv*MDT0000.space
+ $LFS path2fid $DIR/$tfile
+
+ local old_ifs="$IFS"
+ IFS='[:]'
+ fid=($($LFS path2fid $DIR/$tfile))
+ IFS="$old_ifs"
+ let seq=${fid[1]}
+
+ if [[ $seq < $END ]]; then
+ error "used reserved sequence $seq?"
+ fi
+ cleanup || return $?
+}
+run_test 68 "be able to reserve specific sequences in FLDB"
+
+test_69() {
+ local server_version=$(lustre_version_code $SINGLEMDS)
+
+ [[ $server_version -lt $(version_code 2.4.2) ]] &&
+ skip "Need MDS version at least 2.4.2" && return
+
+ [[ $server_version -ge $(version_code 2.4.50) ]] &&
+ [[ $server_version -lt $(version_code 2.5.0) ]] &&
+ skip "Need MDS version at least 2.5.0" && return
+
+ setup
+
+ # use OST0000 since it probably has the most creations
+ local OSTNAME=$(ostname_from_index 0)
+ local mdtosc_proc1=$(get_mdtosc_proc_path mds1 $OSTNAME)
+ local last_id=$(do_facet mds1 lctl get_param -n \
+ osc.$mdtosc_proc1.prealloc_last_id)
+
+ # Want to have OST LAST_ID over 1.5 * OST_MAX_PRECREATE to
+ # verify that the LAST_ID recovery is working properly. If
+ # not, then the OST will refuse to allow the MDS connect
+ # because the LAST_ID value is too different from the MDS
+ #define OST_MAX_PRECREATE=20000
+ local num_create=$((20000 * 5))
+
+ mkdir -p $DIR/$tdir
+ $LFS setstripe -i 0 $DIR/$tdir
+ createmany -o $DIR/$tdir/$tfile- $num_create ||
+ error "createmany: failed to create $num_create files: $?"
+ # delete all of the files with objects on OST0 so the
+ # filesystem is not inconsistent later on
+ $LFS find $MOUNT --ost 0 | xargs rm
+
+ stop_ost || error "OST0 stop failure"
+ add ost1 $(mkfs_opts ost1 $(ostdevname 1)) --reformat --replace \
+ $(ostdevname 1) $(ostvdevname 1) ||
+ error "reformat and replace $ostdev failed"
+ start_ost || error "OST0 restart failure"
+ wait_osc_import_state mds ost FULL
+
+ touch $DIR/$tdir/$tfile-last || error "create file after reformat"
+ local idx=$($LFS getstripe -i $DIR/$tdir/$tfile-last)
+ [ $idx -ne 0 ] && error "$DIR/$tdir/$tfile-last on $idx not 0" || true
+
+ cleanup
+}
+run_test 69 "replace an OST with the same index"
+
+test_70a() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ local MDTIDX=1
+
+ cleanup
+
+ start_mdt 1 || error "MDT0 start fail"
+
+ start_ost || error "OST0 start fail"
+
+ start_mdt 2 || error "MDT1 start fail"
+
+ mount_client $MOUNT || error "mount client fails"
+
+ mkdir -p $DIR/$tdir || error "create dir fail"
+
+ $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
+ error "create remote dir fail"
+
+ rm -rf $DIR/$tdir || error "delete dir fail"
+ cleanup || return $?
+}
+run_test 70a "start MDT0, then OST, then MDT1"
+
+test_70b() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ local MDTIDX=1
+
+ start_ost || error "OST0 start fail"
+
+ start_mdt 1 || error "MDT0 start fail"
+ start_mdt 2 || error "MDT1 start fail"
+
+ mount_client $MOUNT || error "mount client fails"
+
+ mkdir -p $DIR/$tdir || error "create dir fail"
+
+ $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
+ error "create remote dir fail"
+
+ rm -rf $DIR/$tdir || error "delete dir fail"
+
+ cleanup || return $?
+}
+run_test 70b "start OST, MDT1, MDT0"
+
+test_70c() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ local MDTIDX=1
+
+ start_mdt 1 || error "MDT0 start fail"
+ start_mdt 2 || error "MDT1 start fail"
+ start_ost || error "OST0 start fail"
+
+ mount_client $MOUNT || error "mount client fails"
+ stop_mdt 1 || error "MDT1 start fail"
+
+ local mdc_for_mdt1=$($LCTL dl | grep MDT0000-mdc | awk '{print $4}')
+ echo "deactivate $mdc_for_mdt1"
+ $LCTL --device $mdc_for_mdt1 deactivate || return 1
+
+ mkdir -p $DIR/$tdir && error "mkdir succeed"
+
+ $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir &&
+ error "create remote dir succeed"
+
+ cleanup || return $?
+}
+run_test 70c "stop MDT0, mkdir fail, create remote dir fail"
+
+test_70d() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ local MDTIDX=1
+
+ start_mdt 1 || error "MDT0 start fail"
+ start_mdt 2 || error "MDT1 start fail"
+ start_ost || error "OST0 start fail"
+
+ mount_client $MOUNT || error "mount client fails"
+
+ stop_mdt 2 || error "MDT1 start fail"
+
+ local mdc_for_mdt2=$($LCTL dl | grep MDT0001-mdc |
+ awk '{print $4}')
+ echo "deactivate $mdc_for_mdt2"
+ $LCTL --device $mdc_for_mdt2 deactivate ||
+ error "set $mdc_for_mdt2 deactivate failed"
+
+ mkdir -p $DIR/$tdir || error "mkdir fail"
+ $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir &&
+ error "create remote dir succeed"
+
+ rm -rf $DIR/$tdir || error "delete dir fail"
+
+ cleanup || return $?
+}
+run_test 70d "stop MDT1, mkdir succeed, create remote dir fail"
+
+test_71a() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ if combined_mgs_mds; then
+ skip "needs separate MGS/MDT" && return
+ fi
+ local MDTIDX=1
+
+ start_mdt 1 || error "MDT0 start fail"
+ start_ost || error "OST0 start fail"
+ start_mdt 2 || error "MDT1 start fail"
+ start_ost2 || error "OST1 start fail"
+
+ mount_client $MOUNT || error "mount client fails"
+
+ mkdir -p $DIR/$tdir || error "mkdir fail"
+ $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
+ error "create remote dir succeed"
+
+ mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
+ rm -rf $DIR/$tdir || error "delete dir fail"
+
+ umount_client $MOUNT
+ stop_mdt 1 || error "MDT0 stop fail"
+ stop_mdt 2 || error "MDT1 stop fail"
+ stop_ost || error "OST0 stop fail"
+ stop_ost2 || error "OST1 stop fail"
+}
+run_test 71a "start MDT0 OST0, MDT1, OST1"
+
+test_71b() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ if combined_mgs_mds; then
+ skip "needs separate MGS/MDT" && return
+ fi
+ local MDTIDX=1
+
+ start_mdt 2 || error "MDT1 start fail"
+ start_ost || error "OST0 start fail"
+ start_mdt 1 || error "MDT0 start fail"
+ start_ost2 || error "OST1 start fail"
+
+ mount_client $MOUNT || error "mount client fails"
+
+ mkdir -p $DIR/$tdir || error "mkdir fail"
+ $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
+ error "create remote dir succeed"
+
+ mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
+ rm -rf $DIR/$tdir || error "delete dir fail"
+
+ umount_client $MOUNT
+ stop_mdt 1 || error "MDT0 stop fail"
+ stop_mdt 2 || error "MDT1 stop fail"
+ stop_ost || error "OST0 stop fail"
+ stop_ost2 || error "OST1 stop fail"
+}
+run_test 71b "start MDT1, OST0, MDT0, OST1"
+
+test_71c() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ if combined_mgs_mds; then
+ skip "needs separate MGS/MDT" && return
+ fi
+ local MDTIDX=1
+
+ start_ost || error "OST0 start fail"
+ start_ost2 || error "OST1 start fail"
+ start_mdt 2 || error "MDT1 start fail"
+ start_mdt 1 || error "MDT0 start fail"
+
+ mount_client $MOUNT || error "mount client fails"
+
+ mkdir -p $DIR/$tdir || error "mkdir fail"
+ $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
+ error "create remote dir succeed"
+
+ mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
+ rm -rf $DIR/$tdir || error "delete dir fail"
+
+ umount_client $MOUNT
+ stop_mdt 1 || error "MDT0 stop fail"
+ stop_mdt 2 || error "MDT1 stop fail"
+ stop_ost || error "OST0 stop fail"
+ stop_ost2 || error "OST1 stop fail"
+
+}
+run_test 71c "start OST0, OST1, MDT1, MDT0"
+
+test_71d() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ if combined_mgs_mds; then
+ skip "needs separate MGS/MDT" && return
+ fi
+ local MDTIDX=1
+
+ start_ost || error "OST0 start fail"
+ start_mdt 2 || error "MDT0 start fail"
+ start_mdt 1 || error "MDT0 start fail"
+ start_ost2 || error "OST1 start fail"
+
+ mount_client $MOUNT || error "mount client fails"
+
+ mkdir -p $DIR/$tdir || error "mkdir fail"
+ $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
+ error "create remote dir succeed"
+
+ mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
+ rm -rf $DIR/$tdir || error "delete dir fail"
+
+ umount_client $MOUNT
+ stop_mdt 1 || error "MDT0 stop fail"
+ stop_mdt 2 || error "MDT1 stop fail"
+ stop_ost || error "OST0 stop fail"
+ stop_ost2 || error "OST1 stop fail"
+
+}
+run_test 71d "start OST0, MDT1, MDT0, OST1"
+
+test_71e() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ if combined_mgs_mds; then
+ skip "needs separate MGS/MDT" && return
+ fi
+ local MDTIDX=1
+
+ start_ost || error "OST0 start fail"
+ start_mdt 2 || error "MDT1 start fail"
+ start_ost2 || error "OST1 start fail"
+ start_mdt 1 || error "MDT0 start fail"
+
+ mount_client $MOUNT || error "mount client fails"
+
+ mkdir -p $DIR/$tdir || error "mkdir fail"
+ $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
+ error "create remote dir succeed"
+
+ mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
+ rm -rf $DIR/$tdir || error "delete dir fail"
+
+ umount_client $MOUNT
+ stop_mdt 1 || error "MDT0 stop fail"
+ stop_mdt 2 || error "MDT1 stop fail"
+ stop_ost || error "OST0 stop fail"
+ stop_ost2 || error "OST1 stop fail"
+
+}
+run_test 71e "start OST0, MDT1, OST1, MDT0"
+
+test_72() { #LU-2634
+ local mdsdev=$(mdsdevname 1)
+ local ostdev=$(ostdevname 1)
+ local cmd="$E2FSCK -fnvd $mdsdev"
+ local fn=3
+
+ [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
+ skip "ldiskfs only test" && return
+
+ #tune MDT with "-O extents"
+
+ for num in $(seq $MDSCOUNT); do
+ add mds${num} $(mkfs_opts mds$num $(mdsdevname $num)) \
+ --reformat $(mdsdevname $num) $(mdsvdevname $num) ||
+ error "add mds $num failed"
+ $TUNE2FS -O extents $(mdsdevname $num)
+ done
+
+ add ost1 $(mkfs_opts ost1 $ostdev) --reformat $ostdev ||
+ error "add $ostdev failed"
+ start_mgsmds || error "start mds failed"
+ start_ost || error "start ost failed"
+ mount_client $MOUNT || error "mount client failed"
+
+ #create some short symlinks
+ mkdir -p $DIR/$tdir
+ createmany -o $DIR/$tdir/$tfile-%d $fn
+ echo "create $fn short symlinks"
+ for i in $(seq -w 1 $fn); do
+ ln -s $DIR/$tdir/$tfile-$i $MOUNT/$tfile-$i
+ done
+ ls -al $MOUNT
+
+ #umount
+ umount_client $MOUNT || error "umount client failed"
+ stop_mds || error "stop mds failed"
+ stop_ost || error "stop ost failed"
+
+ #run e2fsck
+ run_e2fsck $(facet_active_host $SINGLEMDS) $mdsdev "-n"
+}
+run_test 72 "test fast symlink with extents flag enabled"
+
+test_73() { #LU-3006
+ load_modules
+ [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
+ do_facet ost1 "$TUNEFS --failnode=1.2.3.4@$NETTYPE $(ostdevname 1)" ||
+ error "1st tunefs failed"
+ start_mgsmds || error "start mds failed"
+ start_ost || error "start ost failed"
+ mount_client $MOUNT || error "mount client failed"
+ lctl get_param -n osc.*OST0000-osc-[^M]*.import | grep failover_nids |
+ grep 1.2.3.4@$NETTYPE || error "failover nids haven't changed"
+ umount_client $MOUNT || error "umount client failed"
+ stopall
+ reformat
+}
+run_test 73 "failnode to update from mountdata properly"
+
+test_75() { # LU-2374
+ [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.1) ]] &&
+ skip "Need MDS version at least 2.4.1" && return
+
+ local index=0
+ local opts_mds="$(mkfs_opts mds1 $(mdsdevname 1)) \
+ --reformat $(mdsdevname 1) $(mdsvdevname 1)"
+ local opts_ost="$(mkfs_opts ost1 $(ostdevname 1)) \
+ --reformat $(ostdevname 1) $(ostvdevname 1)"
+
+ #check with default parameters
+ add mds1 $opts_mds || error "add mds1 failed for default params"
+ add ost1 $opts_ost || error "add ost1 failed for default params"
+
+ opts_mds=$(echo $opts_mds | sed -e "s/--mdt//")
+ opts_mds=$(echo $opts_mds |
+ sed -e "s/--index=$index/--index=$index --mdt/")
+ opts_ost=$(echo $opts_ost | sed -e "s/--ost//")
+ opts_ost=$(echo $opts_ost |
+ sed -e "s/--index=$index/--index=$index --ost/")
+
+ add mds1 $opts_mds || error "add mds1 failed for new params"
+ add ost1 $opts_ost || error "add ost1 failed for new params"
+ return 0
+}
+run_test 75 "The order of --index should be irrelevant"
+
+test_76a() {
+ [[ $(lustre_version_code mgs) -ge $(version_code 2.4.52) ]] ||
+ { skip "Need MDS version at least 2.4.52" && return 0; }
+ setup
+ local MDMB_PARAM="osc.*.max_dirty_mb"
+ echo "Change MGS params"
+ local MAX_DIRTY_MB=$($LCTL get_param -n $MDMB_PARAM |
+ head -1)
+ echo "max_dirty_mb: $MAX_DIRTY_MB"
+ local NEW_MAX_DIRTY_MB=$((MAX_DIRTY_MB + MAX_DIRTY_MB))
+ echo "new_max_dirty_mb: $NEW_MAX_DIRTY_MB"
+ do_facet mgs $LCTL set_param -P $MDMB_PARAM=$NEW_MAX_DIRTY_MB
+ wait_update $HOSTNAME "lctl get_param -n $MDMB_PARAM |
+ head -1" $NEW_MAX_DIRTY_MB
+ MAX_DIRTY_MB=$($LCTL get_param -n $MDMB_PARAM | head -1)
+ echo "$MAX_DIRTY_MB"
+ [ $MAX_DIRTY_MB = $NEW_MAX_DIRTY_MB ] ||
+ error "error while apply max_dirty_mb"
+
+ echo "Check the value is stored after remount"
+ stopall
+ setupall
+ wait_update $HOSTNAME "lctl get_param -n $MDMB_PARAM |
+ head -1" $NEW_MAX_DIRTY_MB
+ MAX_DIRTY_MB=$($LCTL get_param -n $MDMB_PARAM | head -1)
+ [ $MAX_DIRTY_MB = $NEW_MAX_DIRTY_MB ] ||
+ error "max_dirty_mb is not saved after remount"
+
+ echo "Change OST params"
+ CLIENT_PARAM="obdfilter.*.client_cache_count"
+ local CLIENT_CACHE_COUNT
+ CLIENT_CACHE_COUNT=$(do_facet ost1 $LCTL get_param -n $CLIENT_PARAM |
+ head -1)
+ echo "client_cache_count: $CLIENT_CACHE_COUNT"
+ NEW_CLIENT_CACHE_COUNT=$((CLIENT_CACHE_COUNT+CLIENT_CACHE_COUNT))
+ echo "new_client_cache_count: $NEW_CLIENT_CACHE_COUNT"
+ do_facet mgs $LCTL set_param -P $CLIENT_PARAM=$NEW_CLIENT_CACHE_COUNT
+ wait_update $(facet_host ost1) "lctl get_param -n $CLIENT_PARAM |
+ head -1" $NEW_CLIENT_CACHE_COUNT
+ CLIENT_CACHE_COUNT=$(do_facet ost1 $LCTL get_param -n $CLIENT_PARAM |
+ head -1)
+ echo "$CLIENT_CACHE_COUNT"
+ [ $CLIENT_CACHE_COUNT = $NEW_CLIENT_CACHE_COUNT ] ||
+ error "error while apply client_cache_count"
+
+ echo "Check the value is stored after remount"
+ stopall
+ setupall
+ wait_update $(facet_host ost1) "lctl get_param -n $CLIENT_PARAM |
+ head -1" $NEW_CLIENT_CACHE_COUNT
+ CLIENT_CACHE_COUNT=$(do_facet ost1 $LCTL get_param -n $CLIENT_PARAM |
+ head -1)
+ echo "$CLIENT_CACHE_COUNT"
+ [ $CLIENT_CACHE_COUNT = $NEW_CLIENT_CACHE_COUNT ] ||
+ error "client_cache_count is not saved after remount"
+ stopall
+}
+run_test 76a "set permanent params set_param -P"
+
+test_76b() { # LU-4783
+ [[ $(lustre_version_code mgs) -ge $(version_code 2.5.57) ]] ||
+ { skip "Need MGS version at least 2.5.57" && return 0; }
+ stopall
+ setupall
+ do_facet mgs $LCTL get_param mgs.MGS.live.params ||
+ error "start params log failed"
+ stopall
+}
+run_test 76b "verify params log setup correctly"
+
+test_77() { # LU-3445
+ local server_version=$(lustre_version_code $SINGLEMDS)
+
+ [[ $server_version -ge $(version_code 2.2.60) ]] &&
+ [[ $server_version -le $(version_code 2.4.0) ]] &&
+ skip "Need MDS version < 2.2.60 or > 2.4.0" && return
+
+ if [[ -z "$fs2ost_DEV" || -z "$fs2mds_DEV" ]]; then
+ is_blkdev $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) &&
+ skip_env "mixed loopback and real device not working" && return
+ fi
+
+ local fs2mdsdev=$(mdsdevname 1_2)
+ local fs2ostdev=$(ostdevname 1_2)
+ local fs2mdsvdev=$(mdsvdevname 1_2)
+ local fs2ostvdev=$(ostvdevname 1_2)
+ local fsname=test1234
+ local mgsnid
+ local failnid="$(h2$NETTYPE 1.2.3.4),$(h2$NETTYPE 4.3.2.1)"
+
+ add fs2mds $(mkfs_opts mds1 $fs2mdsdev) --mgs --fsname=$fsname \
+ --reformat $fs2mdsdev $fs2mdsvdev || error "add fs2mds failed"
+ start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_fs2 EXIT INT ||
+ error "start fs2mds failed"
+
+ mgsnid=$(do_facet fs2mds $LCTL list_nids | xargs | tr ' ' ,)
+ [[ $mgsnid = *,* ]] || mgsnid+=",$mgsnid"
+
+ add fs2ost $(mkfs_opts ost1 $fs2ostdev) --mgsnode=$mgsnid \
+ --failnode=$failnid --fsname=$fsname \
+ --reformat $fs2ostdev $fs2ostvdev ||
+ error "add fs2ost failed"
+ start fs2ost $fs2ostdev $OST_MOUNT_OPTS || error "start fs2ost failed"
+
+ mkdir -p $MOUNT2
+ $MOUNT_CMD $mgsnid:/$fsname $MOUNT2 || error "mount $MOUNT2 failed"
+ DIR=$MOUNT2 MOUNT=$MOUNT2 check_mount || error "check $MOUNT2 failed"
+ cleanup_fs2
+}
+run_test 77 "comma-separated MGS NIDs and failover node NIDs"
+
+test_78() {
+ [[ $(facet_fstype $SINGLEMDS) != ldiskfs ||
+ $(facet_fstype ost1) != ldiskfs ]] &&
+ skip "only applicable to ldiskfs-based MDTs and OSTs" && return
+
+ # reformat the Lustre filesystem with a smaller size
+ local saved_MDSSIZE=$MDSSIZE
+ local saved_OSTSIZE=$OSTSIZE
+ MDSSIZE=$((MDSSIZE - 20000))
+ OSTSIZE=$((OSTSIZE - 20000))
+ reformat || error "(1) reformat Lustre filesystem failed"
+ MDSSIZE=$saved_MDSSIZE
+ OSTSIZE=$saved_OSTSIZE
+
+ # mount the Lustre filesystem
+ setup_noconfig || error "(2) setup Lustre filesystem failed"
+
+ # create some files
+ log "create test files"
+ local i
+ local file
+ local num_files=100
+ mkdir -p $MOUNT/$tdir || error "(3) mkdir $MOUNT/$tdir failed"
+ for i in $(seq $num_files); do
+ file=$MOUNT/$tdir/$tfile-$i
+ dd if=/dev/urandom of=$file count=1 bs=1M ||
+ error "(4) create $file failed"
+ done
+
+ # unmount the Lustre filesystem
+ cleanup || error "(5) cleanup Lustre filesystem failed"
+
+ # run e2fsck on the MDT and OST devices
+ local mds_host=$(facet_active_host $SINGLEMDS)
+ local ost_host=$(facet_active_host ost1)
+ local mds_dev=$(mdsdevname ${SINGLEMDS//mds/})
+ local ost_dev=$(ostdevname 1)
+
+ run_e2fsck $mds_host $mds_dev "-y"
+ run_e2fsck $ost_host $ost_dev "-y"
+
+ # get the original block count of the MDT and OST filesystems
+ local mds_orig_blks=$(get_block_count $SINGLEMDS $mds_dev)
+ local ost_orig_blks=$(get_block_count ost1 $ost_dev)
+
+ # expand the MDT and OST filesystems to the device size
+ run_resize2fs $SINGLEMDS $mds_dev "" || error "expand $SINGLEMDS failed"
+ run_resize2fs ost1 $ost_dev "" || error "expand ost1 failed"
+
+ # run e2fsck on the MDT and OST devices again
+ run_e2fsck $mds_host $mds_dev "-y"
+ run_e2fsck $ost_host $ost_dev "-y"
+
+ # mount the Lustre filesystem
+ setup
+
+ # check the files
+ log "check files after expanding the MDT and OST filesystems"
+ for i in $(seq $num_files); do
+ file=$MOUNT/$tdir/$tfile-$i
+ $CHECKSTAT -t file -s 1048576 $file ||
+ error "(6) checkstat $file failed"
+ done
+
+ # create more files
+ log "create more files after expanding the MDT and OST filesystems"
+ for i in $(seq $((num_files + 1)) $((num_files + 10))); do
+ file=$MOUNT/$tdir/$tfile-$i
+ dd if=/dev/urandom of=$file count=1 bs=1M ||
+ error "(7) create $file failed"
+ done
+
+ # unmount the Lustre filesystem
+ cleanup || error "(8) cleanup Lustre filesystem failed"
+
+ # run e2fsck on the MDT and OST devices
+ run_e2fsck $mds_host $mds_dev "-y"
+ run_e2fsck $ost_host $ost_dev "-y"
+
+ # get the maximum block count of the MDT and OST filesystems
+ local mds_max_blks=$(get_block_count $SINGLEMDS $mds_dev)
+ local ost_max_blks=$(get_block_count ost1 $ost_dev)
+
+ # get the minimum block count of the MDT and OST filesystems
+ local mds_min_blks=$(run_resize2fs $SINGLEMDS $mds_dev "" "-P" 2>&1 |
+ grep minimum | sed -e 's/^.*filesystem: //g')
+ local ost_min_blks=$(run_resize2fs ost1 $ost_dev "" "-P" 2>&1 |
+ grep minimum | sed -e 's/^.*filesystem: //g')
+
+ # shrink the MDT and OST filesystems to a smaller size
+ local shrunk=false
+ local new_blks
+ local base_blks
+ if [[ $mds_max_blks -gt $mds_min_blks &&
+ $mds_max_blks -gt $mds_orig_blks ]]; then
+ [[ $mds_orig_blks -gt $mds_min_blks ]] &&
+ base_blks=$mds_orig_blks || base_blks=$mds_min_blks
+ new_blks=$(( (mds_max_blks - base_blks) / 2 + base_blks ))
+ run_resize2fs $SINGLEMDS $mds_dev $new_blks ||
+ error "shrink $SINGLEMDS to $new_blks failed"
+ shrunk=true
+ fi
+
+ if [[ $ost_max_blks -gt $ost_min_blks &&
+ $ost_max_blks -gt $ost_orig_blks ]]; then
+ [[ $ost_orig_blks -gt $ost_min_blks ]] &&
+ base_blks=$ost_orig_blks || base_blks=$ost_min_blks
+ new_blks=$(( (ost_max_blks - base_blks) / 2 + base_blks ))
+ run_resize2fs ost1 $ost_dev $new_blks ||
+ error "shrink ost1 to $new_blks failed"
+ shrunk=true
+ fi
+
+ # check whether the MDT or OST filesystem was shrunk or not
+ if ! $shrunk; then
+ combined_mgs_mds || stop_mgs || error "(9) stop mgs failed"
+ reformat || error "(10) reformat Lustre filesystem failed"
+ return 0
+ fi
+
+ # run e2fsck on the MDT and OST devices again
+ run_e2fsck $mds_host $mds_dev "-y"
+ run_e2fsck $ost_host $ost_dev "-y"
+
+ # mount the Lustre filesystem again
+ setup
+
+ # check the files
+ log "check files after shrinking the MDT and OST filesystems"
+ for i in $(seq $((num_files + 10))); do
+ file=$MOUNT/$tdir/$tfile-$i
+ $CHECKSTAT -t file -s 1048576 $file ||
+ error "(11) checkstat $file failed"
+ done
+
+ # unmount and reformat the Lustre filesystem
+ cleanup || error "(12) cleanup Lustre filesystem failed"
+ combined_mgs_mds || stop_mgs || error "(13) stop mgs failed"
+ reformat || error "(14) reformat Lustre filesystem failed"
+}
+run_test 78 "run resize2fs on MDT and OST filesystems"
+
if ! combined_mgs_mds ; then
stop mgs
fi
cleanup_gss
+# restore the values of MDSSIZE and OSTSIZE
+MDSSIZE=$STORED_MDSSIZE
+OSTSIZE=$STORED_OSTSIZE
+reformat
+
complete $SECONDS
exit_status
git://git.whamcloud.com / fs / lustre-release.git / blobdiff