ONLY=${ONLY:-"$*"}
-# bug number for skipped test: LU-8972
-ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT 101"
+# bug number for skipped test:
+ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
# bug number for skipped test:
STORED_MDSSIZE=$MDSSIZE
STORED_OSTSIZE=$OSTSIZE
MDSSIZE=200000
+[ $(facet_fstype $SINGLEMDS) = "zfs" ] && MDSSIZE=400000
OSTSIZE=200000
+[ $(facet_fstype ost1) = "zfs" ] && OSTSIZE=400000
fs2mds_HOST=$mds_HOST
fs2ost_HOST=$ost_HOST
[ $(facet_fstype $SINGLEMDS) = "zfs" ] &&
# bug number for skipped test:
ALWAYS_EXCEPT="$ALWAYS_EXCEPT"
+# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
init_logging
fi
mount_client $MOUNT || error "mount_client $MOUNT failed"
wait_osc_import_state mds ost FULL
- wait_osc_import_state client ost FULL
+ wait_osc_import_ready client ost
check_mount || error "check_mount failed"
pass
"MOUNT_LUSTRE_PID $MOUNT_LUSTRE_PID still not killed in $WAIT secs"
ps -ef | grep mount
fi
- stop_mds || error "stopping MDSes failed"
- stop_ost || error "stopping OSSes failed"
+ cleanup || error "cleanup failed with rc $?"
}
run_test 23a "interrupt client during recovery mount delay"
-umount_client $MOUNT
-cleanup_nocli
-
test_23b() { # was test_23
start_mds || error "MDS start failed"
start_ost || error "Unable to start OST1"
local node=$1
local all_removed=false
local i=0
+ local fstype=$(facet_fstype $SINGLEMDS)
+
+ [ $fstype == "zfs" ] && do_rpc_nodes $node "service zed stop"
while ((i < 20)); do
echo "Unloading modules on $node: Attempt $i"
- do_rpc_nodes $node $LUSTRE_RMMOD $(facet_fstype $SINGLEMDS) &&
+ do_rpc_nodes $node $LUSTRE_RMMOD $fstype &&
all_removed=true
do_rpc_nodes $node check_mem_leak || return 1
if $all_removed; then
do_rpc_nodes $node load_modules
return 0
fi
+ if [ $fstype == "zfs" ]; then
+ do_rpc_nodes $node "$ZPOOL status -v"
+ fi
sleep 5
i=$((i + 1))
done
# migrate files/dirs to remote MDT, then move them back
if [ $(lustre_version_code mds1) -ge $(version_code 2.7.50) -a \
- $dne_upgrade != "no" ]; then
+ $dne_upgrade != "no" -a 1 -eq 0 ]; then
$r $LCTL set_param -n \
mdt.${fsname}*.enable_remote_dir=1 2>/dev/null
error_noexit "Unmounting the MDT2"
return 1
}
+ if [[ $fstype == zfs ]]; then
+ $r "$ZPOOL export t32fs-mdt2"
+ fi
shall_cleanup_mdt1=false
fi
error_noexit "Unmounting the MDT"
return 1
}
+ if [[ $fstype == zfs ]]; then
+ $r "$ZPOOL export t32fs-mdt1"
+ fi
shall_cleanup_mdt=false
$r $UMOUNT $tmp/mnt/ost || {
error_noexit "Unmounting the OST"
return 1
}
+ if [[ $fstype == zfs ]]; then
+ $r "$ZPOOL export t32fs-ost1"
+ fi
shall_cleanup_ost=false
t32_reload_modules $node || {
--reformat $fs2mgsdev $fs2mgsvdev || error "add fs2mgs failed"
start $fs2mgs $fs2mgsdev $MGS_MOUNT_OPTS || error "start fs2mgs failed"
stop $fs2mgs -f || error "stop fs2mgs failed"
+ cleanup || error "cleanup failed with $?"
}
run_test 43b "parse nosquash_nids with commas in expr_list"
-umount_client $MOUNT
-cleanup_nocli
-
test_44() { # 16317
setup
check_mount || error "check_mount"
# wait until osts in sync
for (( i=2; i<=$OSTCOUNT; i++ )); do
wait_osc_import_state mds ost$i FULL
- wait_osc_import_state client ost$i FULL
+ wait_osc_import_ready client ost$i
done
#second client see all ost's
[ $RC1 -ne 0 ] && log "lazystatfs multiop failed"
wait $PID || { RC1=$?; log "multiop return error "; }
- $LFS df &
+ $LFS df -l &
PID=$!
sleep 5
kill -s 0 $PID
setup
start_ost2 || error "Unable to start OST2"
wait_osc_import_state mds ost2 FULL
- wait_osc_import_state client ost2 FULL
+ wait_osc_import_ready client ost2
local PARAM="${FSNAME}-OST0001.osc.active"
done
echo
+ # sync all the data and make sure no pending data on the client,
+ # thus the SOM xattr would not be changed any more.
+ cancel_lru_locks osc
+
# backup files
echo backup files to $TMP/$tdir
local files=$(find $DIR/$tdir -type f -newer $TMP/modified_first)
setup_noconfig
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
createmany -o $DIR/$tdir/$tfile-%d 100
- # make sure that OSTs do not cancel llog cookies before we unmount the MDS
-#define OBD_FAIL_OBD_LOG_CANCEL_NET 0x601
- do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x601"
unlinkmany $DIR/$tdir/$tfile-%d 100
stop_mds || error "Unable to stop MDS"
local OST1_NID=$(do_facet ost1 $LCTL list_nids | head -1)
local MDS_NID=$(do_facet $SINGLEMDS $LCTL list_nids | head -1)
+ # add EXCLUDE records to config log, they are not to be
+ # removed by lctl replace_nids
+ set_conf_param_and_check mds \
+ "$LCTL get_param -n osc.$FSNAME-OST0000-osc-MDT0000.active" \
+ "$FSNAME-OST0000.osc.active" \
+ "0"
+
echo "replace_nids should fail if MDS, OSTs and clients are UP"
do_facet mgs $LCTL replace_nids $FSNAME-OST0000 $OST1_NID &&
error "replace_nids fail"
stop_mds || error "Unable to stop MDS"
fi
- setup_noconfig
+ start_mgsmds || error "start mgsmds failed"
+ set_conf_param_and_check mds \
+ "$LCTL get_param -n osc.$FSNAME-OST0000-osc-MDT0000.active" \
+ "$FSNAME-OST0000.osc.active" \
+ "1"
+ start_ost || error "unable to start OST"
+ mount_client $MOUNT || error "mount client failed"
+
check_mount || error "error after nid replace"
cleanup || error "cleanup failed"
reformat
local MAX_DIRTY_MB=$($LCTL get_param -n $MDMB_PARAM |
head -1)
echo "max_dirty_mb: $MAX_DIRTY_MB"
- local NEW_MAX_DIRTY_MB=$((MAX_DIRTY_MB + MAX_DIRTY_MB))
+ local NEW_MAX_DIRTY_MB=$((MAX_DIRTY_MB - 10))
echo "new_max_dirty_mb: $NEW_MAX_DIRTY_MB"
do_facet mgs $LCTL set_param -P $MDMB_PARAM=$NEW_MAX_DIRTY_MB
wait_update $HOSTNAME "$LCTL get_param -n $MDMB_PARAM |
echo -e "\n$cmd"
eval $cmd && error "index $start_ost_idx should be in $ost_indices"
- # 5. Specifying OST indices for directory should fail with ENOSUPP.
+ # 5. Specifying OST indices for directory should succeed.
local dir=$DIR/$tdir/$tdir
mkdir $dir || error "mkdir $dir failed"
cmd="$SETSTRIPE -o $ost_indices $dir"
- echo -e "\n$cmd"
- eval $cmd && error "$cmd should fail, specifying OST indices" \
- "for directory is not supported"
+ if [[ $(lustre_version_code $SINGLEMDS) -gt $(version_code 2.11.53) &&
+ $(lustre_version_code client -gt $(version_code 2.11.53)) ]]; then
+ echo -e "\n$cmd"
+ eval $cmd || error "unable to specify OST indices on directory"
+ else
+ echo "need MDS+client version at least 2.11.53"
+ fi
restore_ostindex
}
-run_test 82a "specify OSTs for file (succeed) or directory (fail)"
+run_test 82a "specify OSTs for file (succeed) or directory (succeed)"
cleanup_82b() {
trap 0
[ $(facet_fstype $SINGLEMDS) != "ldiskfs" ] &&
skip "ldiskfs only test" && return
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.59) ] &&
+ skip "Need server version at least 2.10.59" && return
+
+ do_facet $SINGLEMDS which mkfs.xfs || {
+ skip_env "No mkfs.xfs installed"
+ return
+ }
+
stopall
load_modules
- local tmpmnt=/mnt/$tdir
+ local tmpmnt=$TMP/$tdir
local mdtimg=$tfile-mdt0
do_facet $SINGLEMDS mkdir -p $tmpmnt
}
run_test 116 "big size MDT support"
+test_122() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [[ $(lustre_version_code ost1) -ge $(version_code 2.11.53) ]] ||
+ { skip "Need OST version at least 2.11.53" && return 0; }
+
+
+ reformat
+ LOAD_MODULES_REMOTE=true load_modules
+#define OBD_FAIL_OFD_SET_OID 0x1e0
+ do_facet ost1 $LCTL set_param fail_loc=0x00001e0
+
+ setupall
+ $LFS mkdir -i1 -c1 $DIR/$tdir
+ $LFS setstripe -i0 -c1 $DIR/$tdir
+ do_facet ost1 $LCTL set_param fail_loc=0
+ createmany -o $DIR/$tdir/file_ 1000 ||
+ error "Fail to create a new sequence"
+
+ reformat
+}
+run_test 122 "Check OST sequence update"
+
if ! combined_mgs_mds ; then
stop mgs
fi
git://git.whamcloud.com / fs / lustre-release.git / blobdiff