ONLY=${ONLY:-"$*"}
# bug number for skipped test: LU-8972
-ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT"
+ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT 101"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
is_sles11() # LU-2181
fi
# check MDTs too
- for num in $(seq $MDSCOUNT); do
- local mdtosc=$(get_mdtosc_proc_path mds${num} $FSNAME-OST0001)
- local MPROC="osc.$mdtosc.active"
- local MAX=30
- local WAIT=0
- while [ 1 ]; do
- sleep 5
- RESULT=$(do_facet mds${num} "$LCTL get_param -n $MPROC")
- [ ${PIPESTATUS[0]} = 0 ] || error "Can't read $MPROC"
- if [ $RESULT -eq $DEAC ]; then
- echo -n "MDT deactivated also after"
- echo "$WAIT sec (got $RESULT)"
- break
- fi
- WAIT=$((WAIT + 5))
- if [ $WAIT -eq $MAX ]; then
- error "MDT active: wanted $DEAC got $RESULT"
- fi
- echo "Waiting $(($MAX - $WAIT))secs for MDT deactivated"
- done
- done
+ wait_osp_active ost ${FSNAME}-OST0001 1 0
+
# test new client starts deactivated
umount_client $MOUNT || error "umount_client $MOUNT failed"
mount_client $MOUNT || error "mount_client $MOUNT failed"
chown $T32_QID.$T32_QID $tmp/src/t32_qf_old
# format ost with comma-separated NIDs to verify LU-4460
- local failnid="$(h2$NETTYPE 1.2.3.4),$(h2$NETTYPE 4.3.2.1)"
+ local failnid="$(h2nettype 1.2.3.4),$(h2nettype 4.3.2.1)"
MGSNID="$MGSNID,$MGSNID" OSTOPT="--failnode=$failnid" formatall
setupall
local IMGTYPE=$(facet_fstype $SINGLEMDS)
- tarballs=$($r find $RLUSTRE/tests -maxdepth 1 -name \'disk*-$IMGTYPE.tar.bz2\' | grep -v "2_9")
+ tarballs=$($r find $RLUSTRE/tests -maxdepth 1 \
+ -name \'disk*-$IMGTYPE.tar.bz2\')
if [ -z "$tarballs" ]; then
skip "No applicable tarballs found"
local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" |
awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
do_facet mgs "$LCTL conf_param \
- ${device}.failover.node=$(h2$NETTYPE $FAKENID)" ||
+ ${device}.failover.node=$(h2nettype $FAKENID)" ||
error "Setting ${device}.failover.node=\
- $(h2$NETTYPE $FAKENID) failed."
+ $(h2nettype $FAKENID) failed."
log "Wait for RECONNECT_INTERVAL seconds (10s)"
sleep 10
local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" |
awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
do_facet mgs "$LCTL conf_param \
- ${device}.failover.node=$(h2$NETTYPE $FAKENID)" ||
+ ${device}.failover.node=$(h2nettype $FAKENID)" ||
error "Set ${device}.failover.node=\
- $(h2$NETTYPE $FAKENID) failed"
+ $(h2nettype $FAKENID) failed"
local at_max_saved=0
# adaptive timeouts may prevent seeing the issue
local client_ip=$(host_nids_address $HOSTNAME $NETTYPE)
local host=${client_ip//*./}
local net=${client_ip/%$host/}
- local nosquash_nids=$(h2$NETTYPE $net[$host,$host,$host])
+ local nosquash_nids=$(h2nettype $net[$host,$host,$host])
add $fs2mgs $(mkfs_opts mgs $fs2mgsdev) --fsname=$fsname \
--param mdt.root_squash=$RUNAS_ID:$RUNAS_ID \
reformat_and_config
}
-test_48() { # bug 17636
- reformat
+test_48() { # bz-17636 LU-7473
+ local count
+
setup_noconfig
check_mount || error "check_mount failed"
$GETSTRIPE $MOUNT/widestripe ||
error "$GETSTRIPE $MOUNT/widestripe failed"
- trap cleanup_48 EXIT ERR
+ # In the future, we may introduce more EAs, such as selinux, enlarged
+ # LOV EA, and so on. These EA will use some EA space that is shared by
+ # ACL entries. So here we only check some reasonable ACL entries count,
+ # instead of the max number that is calculated from the max_ea_size.
+ if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.57) ];
+ then
+ count=28 # hard coded of RPC protocol
+ elif [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ count=4000 # max_num 4091 max_ea_size = 32768
+ elif ! large_xattr_enabled; then
+ count=450 # max_num 497 max_ea_size = 4012
+ else
+ count=4500 # max_num 8187 max_ea_size = 1048492
+ # not create too much (>5000) to save test time
+ fi
- # fill acl buffer for avoid expand lsm to them
- getent passwd | awk -F : '{ print "u:"$1":rwx" }' | while read acl; do
- setfacl -m $acl $MOUNT/widestripe
+ echo "It is expected to hold at least $count ACL entries"
+ trap cleanup_48 EXIT ERR
+ for ((i = 0; i < $count; i++)) do
+ setfacl -m u:$((i + 100)):rw $MOUNT/widestripe ||
+ error "Fail to setfacl for $MOUNT/widestripe at $i"
done
+ cancel_lru_locks mdc
stat $MOUNT/widestripe || error "stat $MOUNT/widestripe failed"
+ local r_count=$(getfacl $MOUNT/widestripe | grep "user:" | wc -l)
+ count=$((count + 1)) # for the entry "user::rw-"
+
+ [ $count -eq $r_count ] ||
+ error "Expected ACL entries $count, but got $r_count"
cleanup_48
}
# prepare MDT/OST, make OSC inactive for OST1
[ "$MDSCOUNT" -lt "2" ] && skip_env "$MDSCOUNT < 2, skipping" && return
+ load_modules
[ $(facet_fstype mds2) == zfs ] && import_zpool mds2
do_facet mds2 "$TUNEFS --param mdc.active=0 $(mdsdevname 2)" ||
error "tunefs MDT2 failed"
"$TEST" "${FSNAME}-MDT0001.mdc.active" 0 ||
error "Unable to deactivate MDT2"
+ wait_osp_active mds ${FSNAME}-MDT0001 1 0
+
$LFS mkdir -i1 $DIR/$tdir/2 &&
error "mkdir $DIR/$tdir/2 succeeds after deactive MDT"
+ $LFS mkdir -i0 -c$MDSCOUNT $DIR/$tdir/striped_dir ||
+ error "mkdir $DIR/$tdir/striped_dir fails after deactive MDT2"
+
+ local stripe_count=$($LFS getdirstripe -c $DIR/$tdir/striped_dir)
+ [ $stripe_count -eq $((MDSCOUNT - 1)) ] ||
+ error "wrong $stripe_count != $((MDSCOUNT -1)) for striped_dir"
+
# cleanup
umount_client $MOUNT || error "Unable to umount client"
stop_mds
}
run_test 76c "verify changelog_mask is applied with set_param -P"
+test_76d() { #LU-9399
+ setupall
+
+ local xattr_cache="llite.*.xattr_cache"
+ local cmd="$LCTL get_param -n $xattr_cache | head -1"
+ local new=$((($(eval $cmd) + 1) % 2))
+
+ echo "lctl set_param -P llite.*.xattr_cache=$new"
+ do_facet mgs $LCTL set_param -P $xattr_cache=$new ||
+ error "Can't change xattr_cache"
+ wait_update $HOSTNAME "$cmd" "$new"
+
+ echo "Check $xattr_cache on client $MOUNT"
+ umount_client $MOUNT || error "umount $MOUNT failed"
+ mount_client $MOUNT || error "mount $MOUNT failed"
+ [ $(eval $cmd) -eq $new ] ||
+ error "$xattr_cache != $new on client $MOUNT"
+
+ echo "Check $xattr_cache on the new client $MOUNT2"
+ mount_client $MOUNT2 || error "mount $MOUNT2 failed"
+ [ $(eval $cmd) -eq $new ] ||
+ error "$xattr_cache != $new on client $MOUNT2"
+ umount_client $MOUNT2 || error "umount $MOUNT2 failed"
+
+ stopall
+}
+run_test 76d "verify llite.*.xattr_cache can be set by 'set_param -P' correctly"
+
test_77() { # LU-3445
local server_version=$(lustre_version_code $SINGLEMDS)
[[ $server_version -ge $(version_code 2.8.55) ]] ||
local fs2ostvdev=$(ostvdevname 1_2)
local fsname=test1234
local mgsnid
- local failnid="$(h2$NETTYPE 1.2.3.4),$(h2$NETTYPE 4.3.2.1)"
+ local failnid="$(h2nettype 1.2.3.4),$(h2nettype 4.3.2.1)"
+
+ combined_mgs_mds || stop_mgs || error "stopping MGS service failed"
add fs2mds $(mkfs_opts mds1 $fs2mdsdev) --mgs --fsname=$fsname \
--reformat $fs2mdsdev $fs2mdsvdev || error "add fs2mds failed"
error "start fs2mds failed"
mgsnid=$(do_facet fs2mds $LCTL list_nids | xargs | tr ' ' ,)
- mgsnid="$mgsnid,$mgsnid:$mgsnid"
+ mgsnid="0.0.0.0@tcp,$mgsnid,$mgsnid:$mgsnid"
- add fs2ost $(mkfs_opts ost1 $fs2ostdev) --mgsnode=$mgsnid \
+ add fs2ost --mgsnode=$mgsnid $(mkfs_opts ost1 $fs2ostdev) \
--failnode=$failnid --fsname=$fsname \
--reformat $fs2ostdev $fs2ostvdev ||
error "add fs2ost failed"
test_83() {
[[ $(lustre_version_code ost1) -ge $(version_code 2.6.91) ]] ||
{ skip "Need OST version at least 2.6.91" && return 0; }
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
- skip "Only applicable to ldiskfs-based MDTs"
+ if [ $(facet_fstype ost1) != ldiskfs ]; then
+ skip "Only applicable to ldiskfs-based OSTs"
return
fi
# Mount the OST as an ldiskfs filesystem.
log "mount the OST $dev as a $fstype filesystem"
add ost1 $(mkfs_opts ost1 $dev) $FSTYPE_OPT \
- --reformat $dev $dev > /dev/null ||
+ --reformat $dev > /dev/null ||
error "format ost1 error"
if ! test -b $dev; then
#set xattr
$SETSTRIPE -E 1M -c 1 -E 64M -c 1 -E -1 -c -1 $file ||
error "Create file with 3 components failed"
- i=$($GETSTRIPE -I 3 -c $file)
+ $TRUNCATE $file $((1024*1024*64+1)) || error "truncate file failed"
+ i=$($GETSTRIPE -I3 -c $file) || error "get 3rd stripe count failed"
if [ $i -ne $OSTCOUNT ]; then
left_size=$(expr $left_size + $(expr $OSTCOUNT - $i) \* 24)
echo -n "Since only $i out $OSTCOUNT OSTs are used, "
}
run_test 103 "rename filesystem name"
+test_104() { # LU-6952
+ local mds_mountopts=$MDS_MOUNT_OPTS
+ local ost_mountopts=$OST_MOUNT_OPTS
+ local mds_mountfsopts=$MDS_MOUNT_FS_OPTS
+ local lctl_ver=$(do_facet $SINGLEMDS $LCTL --version |
+ awk '{ print $2 }')
+
+ [[ $(version_code $lctl_ver) -lt $(version_code 2.9.55) ]] &&
+ { skip "this test needs utils above 2.9.55" && return 0; }
+
+ # specify "acl" in mount options used by mkfs.lustre
+ if [ -z "$MDS_MOUNT_FS_OPTS" ]; then
+ MDS_MOUNT_FS_OPTS="acl,user_xattr"
+ else
+
+ MDS_MOUNT_FS_OPTS="${MDS_MOUNT_FS_OPTS},acl,user_xattr"
+ fi
+
+ echo "mountfsopt: $MDS_MOUNT_FS_OPTS"
+
+ #reformat/remount the MDT to apply the MDT_MOUNT_FS_OPT options
+ formatall
+ if [ -z "$MDS_MOUNT_OPTS" ]; then
+ MDS_MOUNT_OPTS="-o noacl"
+ else
+ MDS_MOUNT_OPTS="${MDS_MOUNT_OPTS},noacl"
+ fi
+
+ for num in $(seq $MDSCOUNT); do
+ start mds$num $(mdsdevname $num) $MDS_MOUNT_OPTS ||
+ error "Failed to start MDS"
+ done
+
+ for num in $(seq $OSTCOUNT); do
+ start ost$num $(ostdevname $num) $OST_MOUNT_OPTS ||
+ error "Failed to start OST"
+ done
+
+ mount_client $MOUNT
+ setfacl -m "d:$RUNAS_ID:rwx" $MOUNT &&
+ error "ACL is applied when FS is mounted with noacl."
+
+ MDS_MOUNT_OPTS=$mds_mountopts
+ OST_MOUNT_OPTS=$ost_mountopts
+ MDS_MOUNT_FS_OPTS=$mds_mountfsopts
+
+ formatall
+ setupall
+}
+run_test 104 "Make sure user defined options are reflected in mount"
+
+error_and_umount() {
+ umount $TMP/$tdir
+ rmdir $TMP/$tdir
+ error $*
+}
+
+test_105() {
+ cleanup
+ reformat
+ setup
+ mkdir -p $TMP/$tdir
+ mount --bind $DIR $TMP/$tdir || error "mount bind mnt pt failed"
+ rm -f $TMP/$tdir/$tfile
+ rm -f $TMP/$tdir/${tfile}1
+
+ # Files should not be created in ro bind mount point
+ # remounting from rw to ro
+ mount -o remount,ro $TMP/$tdir ||
+ error_and_umount "readonly remount of bind mnt pt failed"
+ touch $TMP/$tdir/$tfile &&
+ error_and_umount "touch succeeds on ro bind mnt pt"
+ [ -e $TMP/$tdir/$tfile ] &&
+ error_and_umount "file created on ro bind mnt pt"
+
+ # Files should be created in rw bind mount point
+ # remounting from ro to rw
+ mount -o remount,rw $TMP/$tdir ||
+ error_and_umount "read-write remount of bind mnt pt failed"
+ touch $TMP/$tdir/${tfile}1 ||
+ error_and_umount "touch fails on rw bind mnt pt"
+ [ -e $TMP/$tdir/${tfile}1 ] ||
+ error_and_umount "file not created on rw bind mnt pt"
+ umount $TMP/$tdir || error "umount of bind mnt pt failed"
+ rmdir $TMP/$tdir
+ cleanup || error "cleanup failed with $?"
+}
+run_test 105 "check file creation for ro and rw bind mnt pt"
+
+test_107() {
+ [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.10.50) ]] ||
+ { skip "Need MDS version > 2.10.50"; return; }
+
+ start_mgsmds || error "start_mgsmds failed"
+ start_ost || error "unable to start OST"
+
+ # add unknown configuration parameter.
+ local PARAM="$FSNAME-OST0000.ost.unknown_param=50"
+ do_facet mgs "$LCTL conf_param $PARAM"
+ cleanup_nocli || error "cleanup_nocli failed with $?"
+ load_modules
+
+ # unknown param should be ignored while mounting.
+ start_ost || error "unable to start OST after unknown param set"
+
+ cleanup || error "cleanup failed with $?"
+}
+run_test 107 "Unknown config param should not fail target mounting"
+
if ! combined_mgs_mds ; then
stop mgs
fi